summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-01-08Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" versionHans de Goede1-12/+10
Commit 7d06d5895c15 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"") removed the setting of the BTUSB_RESET_RESUME quirk for QCA Rome devices, instead favoring adding USB_QUIRK_RESET_RESUME quirks in usb/core/quirks.c. This was done because the DIY BTUSB_RESET_RESUME reset-resume handling has several issues (see the original commit message). An added advantage of moving over to the USB-core reset-resume handling is that it also disables autosuspend for these devices, which is similarly broken on these. But there are 2 issues with this approach: 1) It leaves the broken DIY BTUSB_RESET_RESUME code in place for Realtek devices. 2) Sofar only 2 of the 10 QCA devices known to the btusb code have been added to usb/core/quirks.c and if we fix the Realtek case the same way we need to add an additional 14 entries. So in essence we need to duplicate a large part of the usb_device_id table in btusb.c in usb/core/quirks.c and manually keep them in sync. This commit instead restores setting a reset-resume quirk for QCA devices in the btusb.c code, avoiding the duplicate usb_device_id table problem. This commit avoids the problems with the original DIY BTUSB_RESET_RESUME code by simply setting the USB_QUIRK_RESET_RESUME quirk directly on the usb_device. This commit also moves the BTUSB_REALTEK case over to directly setting the USB_QUIRK_RESET_RESUME on the usb_device and removes the now unused BTUSB_RESET_RESUME code. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 7d06d5895c15 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"") Cc: stable@vger.kernel.org Cc: Leif Liddy <leif.linux@gmail.com> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Daniel Drake <drake@endlessm.com> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-01-08Bluetooth: btintel: make array 'param' static, shrinks object sizeColin Ian King1-1/+1
Don't populate the const read-only array 'param' on the stack but instead make it static. Makes the object code smaller by nearly 20 bytes: Before: text data bss dec hex filename 11605 2629 64 14298 37da linux/drivers/bluetooth/btintel.o After: text data bss dec hex filename 11531 2685 64 14280 37c8 linux/drivers/bluetooth/btintel.o (gcc version 7.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-01-08Bluetooth: bpa10x: make array 'req' static, shrinks object sizeColin Ian King1-1/+1
Don't populate the const read-only array 'req' on the stack but instead make it static. Makes the object code smaller by over 40 bytes: Before: text data bss dec hex filename 8497 3408 128 12033 2f01 linux/drivers/bluetooth/bpa10x.o After: text data bss dec hex filename 8366 3496 128 11990 2ed6 linux/drivers/bluetooth/bpa10x.o (gcc version 7.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-01-08Bluetooth: Depend on rather than select GPIOLIBLukas Wunner1-3/+3
Commit 27378f4c1b92 ("Bluetooth: Avoid WARN splat due to missing GPIOLIB") amended Kconfig to select GPIOLIB if BT_HCIUART_NOKIA, BT_HCIUART_INTEL or BT_HCIUART_BCM is enabled since all three drivers require it to function. The diagnosis was correct but the treatment was not. As stated in Documentation/gpio/consumer.txt: Guidelines for GPIOs consumers ============================== Drivers that can't work without standard GPIO calls should have Kconfig entries that depend on GPIOLIB. ^^^^^^^^^ Fix it. Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-01-08Bluetooth: hciuart: add nvmem dependencyArnd Bergmann1-0/+1
When the hci support is built-in, but mvmem is a loadable module, we get a link failure: drivers/bluetooth/hci_ll.o: In function `hci_ti_probe': hci_ll.c:(.text+0x226): undefined reference to `nvmem_cell_get' hci_ll.c:(.text+0x238): undefined reference to `nvmem_cell_read' hci_ll.c:(.text+0x244): undefined reference to `nvmem_cell_put' This adds another Kconfig dependency to enforce valid configurations. Fixes: 0e58d0cdb3eb ("Bluetooth: hci_ll: Add optional nvmem BD address source") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-01-08Bluetooth: btusb: Add support for 0cf3:e010AceLan Kao1-0/+1
Device 0cf3:e010 is one of the QCA ROME family. T: Bus=01 Lev=01 Prnt=01 Port=13 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e010 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-26Revert "Bluetooth: btusb: fix QCA Rome suspend/resume"Kai-Heng Feng1-6/+0
This reverts commit fd865802c66bc451dc515ed89360f84376ce1a56. This commit causes a regression on some QCA ROME chips. The USB device reset happens in btusb_open(), hence firmware loading gets interrupted. Furthermore, this commit stops working after commit ("a0085f2510e8976614ad8f766b209448b385492f Bluetooth: btusb: driver to enable the usb-wakeup feature"). Reset-resume quirk only gets enabled in btusb_suspend() when it's not a wakeup source. If we really want to reset the USB device, we need to do it before btusb_open(). Let's handle it in drivers/usb/core/quirks.c. Cc: stable@vger.kernel.org Cc: Leif Liddy <leif.linux@gmail.com> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Daniel Drake <drake@endlessm.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-26Bluetooth: hci_bcm: Streamline runtime PM codeLukas Wunner1-8/+3
This driver seeks to force the Bluetooth device on for the duration of 5 seconds when the Bluetooth device has woken the host and after a complete packet has been received. It does that by calling: pm_runtime_get(); pm_runtime_mark_last_busy(); pm_runtime_put_autosuspend(); The same can be achieved more succinctly with: pm_request_resume(); That's because after runtime resuming the device, rpm_resume() invokes pm_runtime_mark_last_busy() followed by rpm_idle(), which will cause the device to be suspended after expiration of the autosuspend_delay. No functional change intended. Cc: Frédéric Danis <frederic.danis.oss@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-26Bluetooth: Avoid WARN splat due to missing GPIOLIBLukas Wunner1-0/+3
Loading hci_bcm with CONFIG_GPIOLIB=n results in the following splat when calling gpiod_to_irq() from bcm_get_resources(): WARNING: CPU: 0 PID: 1006 at ./include/linux/gpio/consumer.h:450 bcm_get_resources+0x50/0x80 CPU: 0 PID: 1006 Comm: kworker/u8:4 Tainted: G A 4.15.0-rc4custom+ #4 Hardware name: Apple Inc. MacBook8,1/Mac-BE0E8AC46FE800CC, BIOS MB81.88Z.0168.B00.1708080033 08/08/2017 Call Trace: bcm_serdev_probe+0x8b/0xc0 driver_probe_device+0x202/0x310 __driver_attach+0x85/0x90 ? driver_probe_device+0x310/0x310 bus_for_each_dev+0x57/0x80 async_run_entry_fn+0x2c/0xd0 process_one_work+0x1d2/0x3d0 worker_thread+0x26/0x3c0 ? process_one_work+0x3d0/0x3d0 kthread+0x10c/0x130 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x1f/0x30 We could call gpiod_to_irq() only if IS_ENABLED(CONFIG_GPIOLIB) but without GPIOLIB, the driver's power saving features can't be used, so selecting GPIOLIB seems more appropriate. The same issue is present in hci_intel.c and hci_nokia.c, fix those up as well. Reported-by: Max Shavrick <mxms@me.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-26Bluetooth: Add a new 04ca:3015 QCA_ROME deviceIoan Moldovan1-0/+1
This patch adds the 04ca:3015 (from a QCA9377 board) Bluetooth device to the btusb blacklist and makes the kernel use the btqca module instead of btusb. The patch is necessary because, without it the 04ca:3015 device defaults to using the btusb driver, which makes the WIFI side of the QCA9377 board unusable (obtains 0 MBps in speedtest, when the 04ca:3015 bluetooth is used with an audio headset). /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3015 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Ioan Moldovan <ioan.moldovan1999@gmail.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-12-26enic: add wq clean up budgetGovindarajulu Varadarajan2-2/+4
In case of tx clean up, we set '-1' as budget. This means clean up until wq is empty or till (1 << 32) pkts are cleaned. Under heavy load this will run for long time and cause "watchdog: BUG: soft lockup - CPU#25 stuck for 21s!" warning. This patch sets wq clean up budget to 256. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-26net: mediatek: remove superfluous pin setup for MT7622 SoCSean Wang2-14/+24
Remove superfluous pin setup to get out of accessing invalid I/O pin registers because the way for pin configuring tends to be different from various SoCs and thus it should be better being managed and controlled by the pinctrl driver which MT7622 already can support. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller71-311/+706
Lots of overlapping changes. Also on the net-next side the XDP state management is handled more in the generic layers so undo the 'net' nfp fix which isn't applicable in net-next. Include a necessary change by Jakub Kicinski, with log message: ==================== cls_bpf no longer takes care of offload tracking. Make sure netdevsim performs necessary checks. This fixes a warning caused by TC trying to remove a filter it has not added. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds35-173/+494
Pull networking fixes from David Miller" "What's a holiday weekend without some networking bug fixes? [1] 1) Fix some eBPF JIT bugs wrt. SKB pointers across helper function calls, from Daniel Borkmann. 2) Fix regression from errata limiting change to marvell PHY driver, from Zhao Qiang. 3) Fix u16 overflow in SCTP, from Xin Long. 4) Fix potential memory leak during bridge newlink, from Nikolay Aleksandrov. 5) Fix BPF selftest build on s390, from Hendrik Brueckner. 6) Don't append to cfg80211 automatically generated certs file, always write new ones from scratch. From Thierry Reding. 7) Fix sleep in atomic in mac80211 hwsim, from Jia-Ju Bai. 8) Fix hang on tg3 MTU change with certain chips, from Brian King. 9) Add stall detection to arc emac driver and reset chip when this happens, from Alexander Kochetkov. 10) Fix MTU limitng in GRE tunnel drivers, from Xin Long. 11) Fix stmmac timestamping bug due to mis-shifting of field. From Fredrik Hallenberg. 12) Fix metrics match when deleting an ipv4 route. The kernel sets some internal metrics bits which the user isn't going to set when it makes the delete request. From Phil Sutter. 13) mvneta driver loop over RX queues limits on "txq_number" :-) Fix from Yelena Krivosheev. 14) Fix double free and memory corruption in get_net_ns_by_id, from Eric W. Biederman. 15) Flush ipv4 FIB tables in the reverse order. Some tables can share their actual backing data, in particular this happens for the MAIN and LOCAL tables. We have to kill the LOCAL table first, because it uses MAIN's backing memory. Fix from Ido Schimmel. 16) Several eBPF verifier value tracking fixes, from Edward Cree, Jann Horn, and Alexei Starovoitov. 17) Make changes to ipv6 autoflowlabel sysctl really propagate to sockets, unless the socket has set the per-socket value explicitly. From Shaohua Li. 18) Fix leaks and double callback invocations of zerocopy SKBs, from Willem de Bruijn" [1] Is this a trick question? "Relaxing"? "Quiet"? "Fine"? - Linus. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits) skbuff: skb_copy_ubufs must release uarg even without user frags skbuff: orphan frags before zerocopy clone net: reevalulate autoflowlabel setting after sysctl setting openvswitch: Fix pop_vlan action for double tagged frames ipv6: Honor specified parameters in fibmatch lookup bpf: do not allow root to mangle valid pointers selftests/bpf: add tests for recent bugfixes bpf: fix integer overflows bpf: don't prune branches when a scalar is replaced with a pointer bpf: force strict alignment checks for stack pointers bpf: fix missing error return in check_stack_boundary() bpf: fix 32-bit ALU op verification bpf: fix incorrect tracking of register size truncation bpf: fix incorrect sign extension in check_alu_op() bpf/verifier: fix bounds calculation on BPF_RSH ipv4: Fix use-after-free when flushing FIB tables s390/qeth: fix error handling in checksum cmd callback tipc: remove joining group member from congested list selftests: net: Adding config fragment CONFIG_NUMA=y nfp: bpf: keep track of the offloaded program ...
2017-12-21sfc: expose CTPIO stats on NICs that support themBert Kenward2-0/+67
While the Linux driver doesn't use CTPIO ('cut-through programmed I/O'), other drivers on the same port might, so if we're responsible for reporting per-port stats we need to include the CTPIO stats. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21sfc: expose FEC stats on Medford2Edward Cree2-1/+30
There's no explicit capability bit, so we just condition them on having efx->num_mac_stats >= MC_CMD_MAC_NSTATS_V2. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21sfc: support variable number of MAC statsEdward Cree5-11/+29
Medford2 NICs support more than MC_CMD_MAC_NSTATS stats, and report the new count in a field of MC_CMD_GET_CAPABILITIES_V4. This also means that the end generation count moves (it is, as before, the last 64 bits of the DMA buffer, but that is no longer MC_CMD_MAC_GENERATION_END). So read num_mac_stats from the GET_CAPABILITIES response, if present; otherwise assume MC_CMD_MAC_NSTATS; and always use num_mac_stats - 1 rather than MC_CMD_MAC_GENERATION_END. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21sfc: update MCDI protocol headersEdward Cree1-144/+2309
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21cxgb4: add new T5 and T6 device id'sGanesh Goudar1-0/+2
Add device id's 0x50ac, 0x6087 for T5 and T6 cards respectively. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21net: dwc-xlgmac: Get rid of custom hex_dump_to_buffer()Jie Deng1-17/+7
Get rid of custom hex_dump_to_buffer(). The output is slightly changed, i.e. each byte followed by white space. Note, we don't use print_hex_dump() here since the original code uses nedev_dbg(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jie Deng <jiedeng@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21phylink: avoid attaching more than one PHYRussell King1-0/+3
Attaching more than one PHY to phylink is bad news, as we store a pointer to the PHY in a single location. Error out if more than one PHY is attempted to be attached. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds5-11/+13
Pull block fixes from Jens Axboe: "It's been a few weeks, so here's a small collection of fixes that should go into the current series. This contains: - NVMe pull request from Christoph, with a few important fixes. - kyber hang fix from Omar. - A blk-throttl fix from Shaohua, fixing a case where we double charge a bio. - Two call_single_data alignment fixes from me, fixing up some unfortunate changes that went into 4.14 without being properly reviewed on the block side (since nobody was CC'ed on the patch...). - A bounce buffer fix in two parts, one from me and one from Ming. - Revert bdi debug error handling patch. It's causing boot issues for some folks, and a week down the line, we're still no closer to a fix. Revert this patch for now until it's figured out, then we can retry for 4.16" * 'for-linus' of git://git.kernel.dk/linux-block: Revert "bdi: add error handle for bdi_debug_register" null_blk: unalign call_single_data block: unalign call_single_data in struct request block-throttle: avoid double charge block: fix blk_rq_append_bio block: don't let passthrough IO go into .make_request_fn() nvme: setup streams after initializing namespace head nvme: check hw sectors before setting chunk sectors nvme: call blk_integrity_unregister after queue is cleaned up nvme-fc: remove double put reference if admin connect fails nvme: set discard_alignment to zero kyber: fix another domain token wait queue hang
2017-12-21net: ibm: emac: support RGMII-[RX|TX]ID phymodeChristian Lamparter2-4/+7
The RGMII spec allows compliance for devices that implement an internal delay on TXC and/or RXC inside the transmitter. This patch adds the necessary RGMII_[RX|TX]ID mode code to handle such PHYs with the emac driver. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21net: ibm: emac: replace custom PHY_MODE_* macrosChristian Lamparter5-57/+44
The ibm_emac driver predates the PHY_INTERFACE_MODE_* enums by a few years. And while the driver has been retrofitted to use the PHYLIB, the old definitions have stuck around to this day. This patch replaces all occurences of PHY_MODE_* with the respective equivalent PHY_INTERFACE_MODE_* enum. And finally, it purges the old macros for good. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21net: ibm: emac: replace custom rgmii_mode_name with phy_modesChristian Lamparter1-19/+1
phy_modes() in the common phy.h already defines the same phy mode names in lower case. The deleted rgmii_mode_name() is used only in one place and for a "notice-level" printk. Hence, it will not be missed. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21Merge tag 'scsi-fixes' of ↵Linus Torvalds6-18/+21
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two simple fixes: one for sparse warnings that were introduced by the merge window conversion to blist_flags_t and the other to fix dropped I/O during reset in aacraid" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: aacraid: Fix I/O drop during reset scsi: core: Use blist_flags_t consistently
2017-12-21Merge tag 'acpi-4.15-rc5' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix a recently introduced issue in the ACPI CPPC driver and an obscure error hanling bug in the APEI code. Specifics: - Fix an error handling issue in the ACPI APEI implementation of the >read callback in struct pstore_info (Takashi Iwai). - Fix a possible out-of-bounds arrar read in the ACPI CPPC driver (Colin Ian King)" * tag 'acpi-4.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: APEI / ERST: Fix missing error handling in erst_reader() ACPI: CPPC: remove initial assignment of pcc_ss_data
2017-12-21Merge tag 'pm-4.15-rc5' of ↵Linus Torvalds3-9/+28
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a regression in the ondemand and conservative cpufreq governors that was introduced during the 4.13 cycle, a recent regression in the imx6q cpufreq driver and a regression in the PCI handling of hibernation from the 4.14 cycle. Specifics: - Fix an issue in the PCI handling of the "thaw" transition during hibernation (after creating an image), introduced by a bug fix from the 4.13 cycle and exposed by recent changes in the IRQ subsystem, that caused pci_restore_state() to be called for devices in low-power states in some cases which is incorrect and breaks MSI management on some systems (Rafael Wysocki). - Fix a recent regression in the imx6q cpufreq driver that broke speed grading on i.MX6 QuadPlus by omitting checks causing invalid operating performance points (OPPs) to be disabled on that SoC as appropriate (Lucas Stach). - Fix a regression introduced during the 4.14 cycle in the ondemand and conservative cpufreq governors that causes the sampling interval used by them to be shorter than the tick period in some cases which leads to incorrect decisions (Rafael Wysocki)" * tag 'pm-4.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: governor: Ensure sufficiently large sampling intervals cpufreq: imx6q: fix speed grading regression on i.MX6 QuadPlus PCI / PM: Force devices to D0 in pci_pm_thaw_noirq()
2017-12-21Merge tag 'spi-fix-v4.15-rc4' of ↵Linus Torvalds5-4/+23
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A bunch of really small fixes here, all driver specific and mostly in error handling and remove paths. The most important fixes are for the a3700 clock configuration and a fix for a nasty stall which could potentially cause data corruption with the xilinx driver" * tag 'spi-fix-v4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: atmel: fixed spin_lock usage inside atmel_spi_remove spi: sun4i: disable clocks in the remove function spi: rspi: Do not set SPCR_SPE in qspi_set_config_register() spi: Fix double "when" spi: a3700: Fix clk prescaling for coefficient over 15 spi: xilinx: Detect stall with Unknown commands spi: imx: Update device tree binding documentation
2017-12-21Merge tag 'mfd-fixes-4.15' of ↵Linus Torvalds3-34/+40
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MDF bugfixes from Lee Jones: - Fix message timing issues and report correct state when an error occurs in cros_ec_spi - Reorder enums used for Power Management in rtsx_pci - Use correct OF helper for obtaining child nodes in twl4030-audio and twl6040 * tag 'mfd-fixes-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: Fix RTS5227 (and others) powermanagement mfd: cros ec: spi: Fix "in progress" error signaling mfd: twl6040: Fix child-node lookup mfd: twl4030-audio: Fix sibling-node lookup mfd: cros ec: spi: Don't send first message too soon
2017-12-20s390/qeth: replace open-coded in*_pton()Julian Wiedmann3-89/+12
There's a common helper for parsing an IP address string, let's use it. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: pass full data length to l3_fill_header()Julian Wiedmann1-8/+10
The TSO and IQD paths already need to fix-up the current values, and OSA will require more flexibility in the future as well. So just let the caller specify the data length. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: streamline l3_fill_header()Julian Wiedmann1-56/+43
Consolidate the cast type translation, move the passthru path out of the RCU-guarded section, and use the appropriate rtable helpers when determining the next-hop address. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: unionize next-hop field in qeth L3 headerJulian Wiedmann2-8/+23
The L3 packet descriptor's 'dest_addr' field is used for a different purpose in RX descriptors. Clean up the hard-coded byte accesses and try to be more self-documenting. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: recognize non-IP multicast on L3 transmitJulian Wiedmann2-5/+1
When 1. an skb has no neighbour, and 2. skb->protocol is not IP[V6], we select the skb's cast type based on its destination MAC address. The multicast check is currently restricted to Multicast IP-mapped MACs. Extend it to also cover non-IP Multicast MACs. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: clean up l3_get_cast_type()Julian Wiedmann2-35/+20
Use the proper helpers to check for multicast IP addressing, and remove some ancient Token Ring code. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: robustify qeth_get_ip_version()Julian Wiedmann1-6/+8
Instead of assuming that skb->data points to the Ethernet header, use the right helper and struct to access the Ethertype field. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: align L2 and L3 set_rx_mode() implementationsJulian Wiedmann2-67/+43
Once all of qeth_l3_set_rx_mode()'s single-use helpers are folded back in, the two implementations actually look quite similar. So improve the readability by converting both set_rx_mode() routines to a common format. This also allows us to walk ip_mc_htable just once, instead of three times. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: use ether_addr_* helpersJulian Wiedmann6-37/+32
Be a little more self-documenting, and get rid of OSA_ADDR_LEN. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: consolidate qeth MAC address helpersJulian Wiedmann1-29/+18
For adding/removing a MAC address, use just one helper each that handles both unicast and multicast. Saves one level of indirection for multicast addresses, while improving the error reporting for unicast addresses. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: don't keep track of MAC address's cast typeJulian Wiedmann2-20/+8
Instead of tracking the uc/mc state in each MAC address object, just check the multicast bit in the address itself. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: drop CONFIG_QETH_IPV6Julian Wiedmann2-54/+9
commit "s390/qeth: use ip*_eth_mc_map helpers" removed the last occurrence of CONFIG_IPV6-dependent code. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: use ip*_eth_mc_map helpersJulian Wiedmann1-29/+14
Get rid of some wrapper indirection, and stop accessing the skb at hard-coded offsets. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20qeth: convert qeth_reply.refcnt from atomic_t to refcount_tElena Reshetova2-6/+5
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable qeth_reply.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> [jwi: removed the WARN_ONs. Use CONFIG_REFCOUNT_FULL if you care.] Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: convert lcs_reply.refcnt from atomic_t to refcount_tElena Reshetova2-8/+5
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable lcs_reply.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> [jwi: removed the WARN_ONs. Use CONFIG_REFCOUNT_FULL if you care.] Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20null_blk: unalign call_single_dataJens Axboe1-2/+2
Commit 966a967116e6 randomly added alignment to this structure, but it's actually detrimental to performance of null_blk. Test case: Running on both the home and remote node shows a ~5% degradation in performance. While in there, move blk_status_t to the hole after the integer tag in the nullb_cmd structure. After this patch, we shrink the size from 192 to 152 bytes. Fixes: 966a967116e69 ("smp: Avoid using two cache lines for struct call_single_data") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-20s390/qeth: fix error handling in checksum cmd callbackJulian Wiedmann1-1/+8
Make sure to check both return code fields before processing the response. Otherwise we risk operating on invalid data. Fixes: c9475369bd2b ("s390/qeth: rework RX/TX checksum offload") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20netdevsim: correctly check return value of debugfs_create_dirPrashant Bhole2-6/+8
- Checking return value with IS_ERROR_OR_NULL - Added error handling where it was not handled Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20Merge tag 'mlx5-fixes-2017-12-19' of ↵David S. Miller15-100/+208
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: =================== Mellanox, mlx5 fixes 2017-12-19 The follwoing series includes some fixes for mlx5 core and etherent driver. Please pull and let me know if there is any problem. This series doesn't introduce any conflict with the ongoing mlx5 for-next submission. For -stable: kernels >= v4.7.y ("net/mlx5e: Fix possible deadlock of VXLAN lock") ("net/mlx5e: Add refcount to VXLAN structure") ("net/mlx5e: Prevent possible races in VXLAN control flow") ("net/mlx5e: Fix features check of IPv6 traffic") kernels >= v4.9.y ("net/mlx5: Fix error flow in CREATE_QP command") ("net/mlx5: Fix rate limit packet pacing naming and struct") kernels >= v4.13.y ("net/mlx5: FPGA, return -EINVAL if size is zero") kernels >= v4.14.y ("Revert "mlx5: move affinity hints assignments to generic code") All above patches apply and compile with no issues on corresponding -stable. =================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20nfp: bpf: keep track of the offloaded programJakub Kicinski2-4/+51
After TC offloads were converted to callbacks we have no choice but keep track of the offloaded filter in the driver. The check for nn->dp.bpf_offload_xdp was a stop gap solution to make sure failed TC offload won't disable XDP, it's no longer necessary. nfp_net_bpf_offload() will return -EBUSY on TC vs XDP conflicts. Fixes: 3f7889c4c79b ("net: sched: cls_bpf: call block callbacks for offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-08 00:31:07 +0300