summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2025-02-17drm/i2c/tda998x: Hardcode register values for Starlightsw.multimedia1-2/+5
A proper solution to this hack should be found. Signed-off-by: jack.zhu <jack.zhu@starfivetech.com> Signed-off-by: keith.zhao <keith.zhao@starfivetech.com>
2025-02-17drm/starfive: set FOP_UNSIGNED_OFFSET in starfive_drm_driver_fopsAndreas Schwab1-0/+1
This fixes the error from drm_open: [ +0.000020] [ C1] WARNING: CPU: 1 PID: 1110 at drivers/gpu/drm/drm_file.c Signed-off-by: Andreas Schwab <schwab@suse.de>
2025-02-17[WIP] drm/starfive: Support DRM_FORMAT_XRGB8888Emil Renner Berthing2-0/+2
When creating dumb buffers with 32bpp and 24bit colour depth this is default mode return by drm_mode_legacy_fb_format. So we need to support this for common dumb buffers to just work. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
2025-02-17drm/starfive: Add StarFive drm driversw.multimedia20-0/+3390
Add starfive DRM Display driver framework Signed-off-by: jack.zhu <jack.zhu@starfivetech.com> Signed-off-by: keith.zhao <keith.zhao@starfivetech.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
2025-02-17dmaengine: dw-axi-dmac: Add StarFive JH7100 supportSamin Guo2-0/+16
Signed-off-by: Samin Guo <samin.guo@starfivetech.com> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
2025-02-17dmaengine: dw-axi-dmac: Handle xfer start while non-idleSamin Guo2-1/+12
Signed-off-by: Samin Guo <samin.guo@starfivetech.com> Signed-off-by: Curry Zhang <curry.zhang@starfivetech.com>
2025-02-17hwrng: Add StarFive JH7100 Random Number Generator driverHuan Feng4-0/+435
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
2025-02-17drivers/tty/serial/8250: update driver for JH7100Samin Guo1-0/+8
2025-02-17serial: 8250_dw: Add starfive,jh7100-hsuart compatibleEmil Renner Berthing1-0/+1
This adds a compatible for the high speed UARTs on the StarFive JH7100 RISC-V SoC. Just like the regular uarts we also need to keep the input clocks at their default rate and rely only on the divisor in the UART. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
2025-02-17net: stmmac: use GFP_DMA32Matteo Croce1-2/+2
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
2025-02-17usb: cdns3: starfive: Initialize JH7100 host modeEmil Renner Berthing1-0/+43
These settings are directly copied from StarFive's port of u-boot for the JH7100: /* config strap */ _SET_SYSCON_REG_SCFG_usb0_mode_strap(0x2); _SET_SYSCON_REG_SCFG_usb7_PLL_EN(0x1); _SET_SYSCON_REG_SCFG_usb7_U3_EQ_EN(0x1); _SET_SYSCON_REG_SCFG_usb7_U3_SSRX_SEL(0x1); _SET_SYSCON_REG_SCFG_usb7_U3_SSTX_SEL(0x1); _SET_SYSCON_REG_SCFG_usb3_utmi_iddig(0x1); Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
2025-02-17net: phy: motorcomm: Disable rgmii rx delayEmil Renner Berthing1-0/+6
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
2025-02-17pinctrl: starfive: Reset pinmux settingsEmil Renner Berthing1-0/+66
Current u-boot doesn't seem to take into account that some GPIOs are configured as inputs/outputs of certain peripherals on power-up. This means it ends up configuring some GPIOs as inputs to more than one peripheral which the documentation explicitly says is illegal. Similarly it also ends up configuring more than one GPIO as output of the same peripheral. While not explicitly mentioned by the documentation this also seems like a bad idea. The easiest way to remedy this mess is to just disconnect all GPIOs from peripherals and have our pinmux configuration set everything up properly. This, however, means that we'd disconnect the serial console from its pins for a while, so add a device tree property to keep certain GPIOs from being reset. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
2025-02-17clk: starfive: jh7100: Keep more clocks aliveEmil Renner Berthing1-9/+10
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
2025-02-17usb: cdns3: starfive: Add StarFive JH7100 supportEmil Renner Berthing1-18/+28
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
2025-02-17usb: cdns3: starfive: Don't store device backpointerEmil Renner Berthing1-22/+15
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
2025-02-17usb: cdns3: starfive: Simplify mode initEmil Renner Berthing1-30/+21
The syscon regmap and offset to the USB mode register is only used at probe time, so there is no need to store it in the device data. Just get the regmap pointer in the cdns_mode_init() function where it is needed. Also this function never uses the platform device, so just pass the device pointer directly. Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
2025-02-17power: reset: tps65086: Allow building as a moduleEmil Renner Berthing2-1/+2
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
2025-02-17reset: starfive: Add JH7100 audio reset driverEmil Renner Berthing4-0/+91
The audio resets are almost identical to the system resets, there are just fewer of them. So factor out and export a generic probe function, so most of the reset controller implementation can be shared. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
2025-02-17pwm: opencores: Add PWM driver supportWilliam Qiu3-0/+251
Add driver for OpenCores PWM Controller. And add compatibility code which based on StarFive SoC. Co-developed-by: Hal Feng <hal.feng@starfivetech.com> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Signed-off-by: William Qiu <william.qiu@starfivetech.com> Tested-by: Maud Spierings <maud_spierings@hotmail.com> Link: https://lore.kernel.org/r/20250106103540.10079-1-william.qiu@starfivetech.com Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
2025-02-16Merge tag 'driver-core-6.14-rc3' of ↵Linus Torvalds4-1/+235
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core api addition from Greg KH: "Here is a driver core new api for 6.14-rc3 that is being added to allow platform devices from stop being abused. It adds a new 'faux_device' structure and bus and api to allow almost a straight or simpler conversion from platform devices that were not really a platform device. It also comes with a binding for rust, with an example driver in rust showing how it's used. I'm adding this now so that the patches that convert the different drivers and subsystems can all start flowing into linux-next now through their different development trees, in time for 6.15-rc1. We have a number that are already reviewed and tested, but adding those conversions now doesn't seem right. For now, no one is using this, and it passes all build tests from 0-day and linux-next, so all should be good" * tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: rust/kernel: Add faux device bindings driver core: add a faux bus for use when a simple device/bus is needed
2025-02-16Merge tag 'tty-6.14-rc3' of ↵Linus Torvalds8-26/+35
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are some small serial driver fixes for some reported problems. Nothing major, just: - sc16is7xx irq check fix - 8250 fifo underflow fix - serial_port and 8250 iotype fixes Most of these have been in linux-next already, and all have passed 0-day testing" * tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250: Fix fifo underflow on flush serial: 8250_pnp: Remove unneeded ->iotype assignment serial: 8250_platform: Remove unneeded ->iotype assignment serial: 8250_of: Remove unneeded ->iotype assignment serial: port: Make ->iotype validation global in __uart_read_properties() serial: port: Always update ->iotype in __uart_read_properties() serial: port: Assign ->iotype correctly when ->iobase is set serial: sc16is7xx: Fix IRQ number check behavior
2025-02-16Merge tag 'usb-6.14-rc3' of ↵Linus Torvalds16-45/+139
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes, and new device ids, for 6.14-rc3. Lots of tiny stuff for reported problems, including: - new device ids and quirks - usb hub crash fix found by syzbot - dwc2 driver fix - dwc3 driver fixes - uvc gadget driver fix - cdc-acm driver fixes for a variety of different issues - other tiny bugfixes Almost all of these have been in linux-next this week, and all have passed 0-day testing" * tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY usb: roles: set switch registered flag early on usb: gadget: uvc: Fix unstarted kthread worker USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist usb: gadget: core: flush gadget workqueue after device removal USB: gadget: f_midi: f_midi_complete to call queue_work usb: core: fix pipe creation for get_bMaxPacketSize0 usb: dwc3: Fix timeout issue during controller enter/exit from halt state USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk usb: cdc-acm: Fix handling of oversized fragments usb: cdc-acm: Check control transfer buffer size before access usb: xhci: Restore xhci_pci support for Renesas HCs USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI USB: serial: option: drop MeiG Smart defines USB: serial: option: fix Telit Cinterion FN990A name USB: serial: option: add Telit Cinterion FN990B compositions USB: serial: option: add MeiG Smart SLM828 usb: gadget: f_midi: fix MIDI Streaming descriptor lengths usb: dwc2: gadget: remove of_node reference upon udc_stop ...
2025-02-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-4/+44
Pull kvm fixes from Paolo Bonzini: "ARM: - Large set of fixes for vector handling, especially in the interactions between host and guest state. This fixes a number of bugs affecting actual deployments, and greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland for dealing with this thankless task. - Fix an ugly race between vcpu and vgic creation/init, resulting in unexpected behaviours - Fix use of kernel VAs at EL2 when emulating timers with nVHE - Small set of pKVM improvements and cleanups x86: - Fix broken SNP support with KVM module built-in, ensuring the PSP module is initialized before KVM even when the module infrastructure cannot be used to order initcalls - Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated by KVM to fix a NULL pointer dereference - Enter guest mode (L2) from KVM's perspective before initializing the vCPU's nested NPT MMU so that the MMU is properly tagged for L2, not L1 - Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the guest's value may be stale if a VM-Exit is handled in the fastpath" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits) x86/sev: Fix broken SNP support with KVM module built-in KVM: SVM: Ensure PSP module is initialized if KVM module is built-in crypto: ccp: Add external API interface for PSP module initialization KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic() KVM: arm64: timer: Drop warning on failed interrupt signalling KVM: arm64: Fix alignment of kvm_hyp_memcache allocations KVM: arm64: Convert timer offset VA when accessed in HYP code KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp() KVM: arm64: Eagerly switch ZCR_EL{1,2} KVM: arm64: Mark some header functions as inline KVM: arm64: Refactor exit handlers KVM: arm64: Refactor CPTR trap deactivation KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN KVM: arm64: Remove host FPSIMD saving for non-protected KVM KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop KVM: nSVM: Enter guest mode before initializing nested NPT MMU KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper ...
2025-02-16Merge tag 'devicetree-fixes-for-6.14-1' of ↵Linus Torvalds3-2/+126
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Add bindings for QCom QCS8300 clocks, QCom SAR2130P qfprom, and powertip,{st7272|hx8238a} displays - Fix compatible for TI am62a7 dss - Add a kunit test for __of_address_resource_bounds() * tag 'devicetree-fixes-for-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: display: Add powertip,{st7272|hx8238a} as DT Schema description dt-bindings: nvmem: qcom,qfprom: Add SAR2130P compatible dt-bindings: display: ti: Fix compatible for am62a7 dss of: address: Add kunit test for __of_address_resource_bounds() dt-bindings: clock: qcom: Add QCS8300 video clock controller dt-bindings: clock: qcom: Add CAMCC clocks for QCS8300 dt-bindings: clock: qcom: Add GPU clocks for QCS8300
2025-02-15Merge tag 's390-6.14-4' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix isolated VFs handling by verifying that a VF’s parent PF is locally owned before registering it in an existing PCI domain - Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES to workaround gcc failure in handling __builtin_constant_p() in this case - Fix CHPID "configure" attribute caching in CIO by not updating the cache when SCLP returns no data, ensuring consistent sysfs output - Remove CONFIG_LSM from default configs and rely on defaults, which enables BPF LSM hook * tag 's390-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: Fix handling of isolated VFs s390/pci: Pull search for parent PF out of zpci_iov_setup_virtfn() s390/bitops: Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES s390/cio: Fix CHPID "configure" attribute caching s390/configs: Remove CONFIG_LSM
2025-02-15tegra210-adma: fix 32-bit x86 buildLinus Torvalds1-3/+14
The Tegra210 Audio DMA controller driver did a plain divide: page_no = (res_page->start - res_base->start) / cdata->ch_base_offset; which causes problems on 32-bit x86 configurations that have 64-bit resource sizes: x86_64-linux-ld: drivers/dma/tegra210-adma.o: in function `tegra_adma_probe': tegra210-adma.c:(.text+0x1322): undefined reference to `__udivdi3' because gcc doesn't generate the trivial code for a 64-by-32 divide, turning it into a function call to do a full 64-by-64 divide. And the kernel intentionally doesn't provide that helper function, because 99% of the time all you want is the narrower version. Of course, tegra210 is a 64-bit architecture and the 32-bit x86 build is purely for build testing, so this really is just about build coverage failure. But build coverage is good. Side note: div_u64() would be suboptimal if you actually have a 32-bit resource_t, so our "helper" for divides are admittedly making it harder than it should be to generate good code for all the possible cases. At some point, I'll consider 32-bit x86 so entirely legacy that I can't find it in myself to care any more, and we'll just add the __udivdi3 library function. But for now, the right thing to do is to use "div_u64()" to show that you know that you are doing the simpler divide with a 32-bit number. And the build error enforces that. While fixing the build issue, also check for division-by-zero, and for overflow. Which hopefully cannot happen on real production hardware, but the value of 'ch_base_offset' can definitely be zero in other places. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-02-15Merge tag 'gpio-fixes-for-v6.14-rc3-take2' of ↵Linus Torvalds4-19/+87
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix interrupt handling issues in gpio-bcm-kona - add an ACPI quirk for Acer Nitro ANV14 fixing an issue with spurious wake up events - add missing return value checks to gpio-stmpe - fix a crash in error path in gpiochip_get_ngpios() * tag 'gpio-fixes-for-v6.14-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: Fix crash on error in gpiochip_get_ngpios() gpio: stmpe: Check return value of stmpe_reg_read in stmpe_gpio_irq_sync_unlock gpiolib: acpi: Add a quirk for Acer Nitro ANV14 gpio: bcm-kona: Add missing newline to dev_err format string gpio: bcm-kona: Make sure GPIO bits are unlocked when requesting IRQ gpio: bcm-kona: Fix GPIO lock/unlock for banks above bank 0
2025-02-15Merge tag 'pci-v6.14-fixes-3' of ↵Linus Torvalds2-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fixes from Bjorn Helgaas: - Update a BUILD_BUG_ON() usage that works on current compilers, but breaks compilation on gcc 5.3.1 (Alex Williamson) - Avoid use of FLR for Mediatek MT7922 WiFi; the device previously worked after a long timeout and fallback to SBR, but after a recent RRS change it doesn't work at all after FLR (Bjorn Helgaas) * tag 'pci-v6.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI: Avoid FLR for Mediatek MT7922 WiFi PCI: Fix BUILD_BUG_ON usage for old gcc
2025-02-15Merge tag 'kvm-x86-fixes-6.14-rcN' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini96-479/+703
KVM fixes for 6.14 part 1 - Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated by KVM to fix a NULL pointer dereference. - Enter guest mode (L2) from KVM's perspective before initializing the vCPU's nested NPT MMU so that the MMU is properly tagged for L2, not L1. - Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the guest's value may be stale if a VM-Exit is handled in the fastpath.
2025-02-15x86/sev: Fix broken SNP support with KVM module built-inAshish Kalra1-4/+30
Fix issues with enabling SNP host support and effectively SNP support which is broken with respect to the KVM module being built-in. SNP host support is enabled in snp_rmptable_init() which is invoked as device_initcall(). SNP check on IOMMU is done during IOMMU PCI init (IOMMU_PCI_INIT stage). And for that reason snp_rmptable_init() is currently invoked via device_initcall() and cannot be invoked via subsys_initcall() as core IOMMU subsystem gets initialized via subsys_initcall(). Now, if kvm_amd module is built-in, it gets initialized before SNP host support is enabled in snp_rmptable_init() : [ 10.131811] kvm_amd: TSC scaling supported [ 10.136384] kvm_amd: Nested Virtualization enabled [ 10.141734] kvm_amd: Nested Paging enabled [ 10.146304] kvm_amd: LBR virtualization supported [ 10.151557] kvm_amd: SEV enabled (ASIDs 100 - 509) [ 10.156905] kvm_amd: SEV-ES enabled (ASIDs 1 - 99) [ 10.162256] kvm_amd: SEV-SNP enabled (ASIDs 1 - 99) [ 10.171508] kvm_amd: Virtual VMLOAD VMSAVE supported [ 10.177052] kvm_amd: Virtual GIF supported ... ... [ 10.201648] kvm_amd: in svm_enable_virtualization_cpu And then svm_x86_ops->enable_virtualization_cpu() (svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following: wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa); So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs. snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu() as following : ... [ 11.256138] kvm_amd: in svm_enable_virtualization_cpu ... [ 11.264918] SEV-SNP: in snp_rmptable_init This triggers a #GP exception in snp_rmptable_init() when snp_enable() is invoked to set SNP_EN in SYSCFG MSR: [ 11.294289] unchecked MSR access error: WRMSR to 0xc0010010 (tried to write 0x0000000003fc0000) at rIP: 0xffffffffaf5d5c28 (native_write_msr+0x8/0x30) ... [ 11.294404] Call Trace: [ 11.294482] <IRQ> [ 11.294513] ? show_stack_regs+0x26/0x30 [ 11.294522] ? ex_handler_msr+0x10f/0x180 [ 11.294529] ? search_extable+0x2b/0x40 [ 11.294538] ? fixup_exception+0x2dd/0x340 [ 11.294542] ? exc_general_protection+0x14f/0x440 [ 11.294550] ? asm_exc_general_protection+0x2b/0x30 [ 11.294557] ? __pfx_snp_enable+0x10/0x10 [ 11.294567] ? native_write_msr+0x8/0x30 [ 11.294570] ? __snp_enable+0x5d/0x70 [ 11.294575] snp_enable+0x19/0x20 [ 11.294578] __flush_smp_call_function_queue+0x9c/0x3a0 [ 11.294586] generic_smp_call_function_single_interrupt+0x17/0x20 [ 11.294589] __sysvec_call_function+0x20/0x90 [ 11.294596] sysvec_call_function+0x80/0xb0 [ 11.294601] </IRQ> [ 11.294603] <TASK> [ 11.294605] asm_sysvec_call_function+0x1f/0x30 ... [ 11.294631] arch_cpu_idle+0xd/0x20 [ 11.294633] default_idle_call+0x34/0xd0 [ 11.294636] do_idle+0x1f1/0x230 [ 11.294643] ? complete+0x71/0x80 [ 11.294649] cpu_startup_entry+0x30/0x40 [ 11.294652] start_secondary+0x12d/0x160 [ 11.294655] common_startup_64+0x13e/0x141 [ 11.294662] </TASK> This #GP exception is getting triggered due to the following errata for AMD family 19h Models 10h-1Fh Processors: Processor may generate spurious #GP(0) Exception on WRMSR instruction: Description: The Processor will generate a spurious #GP(0) Exception on a WRMSR instruction if the following conditions are all met: - the target of the WRMSR is a SYSCFG register. - the write changes the value of SYSCFG.SNPEn from 0 to 1. - One of the threads that share the physical core has a non-zero value in the VM_HSAVE_PA MSR. The document being referred to above: https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf To summarize, with kvm_amd module being built-in, KVM/SVM initialization happens before host SNP is enabled and this SVM initialization sets VM_HSAVE_PA to non-zero, which then triggers a #GP when SYSCFG.SNPEn is being set and this will subsequently cause SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not set on all CPUs. Essentially SNP host enabling code should be invoked before KVM initialization, which is currently not the case when KVM is built-in. Add fix to call snp_rmptable_init() early from iommu_snp_enable() directly and not invoked via device_initcall() which enables SNP host support before KVM initialization with kvm_amd module built-in. Add additional handling for `iommu=off` or `amd_iommu=off` options. Note that IOMMUs need to be enabled for SNP initialization, therefore, if host SNP support is enabled but late IOMMU initialization fails then that will cause PSP driver's SNP_INIT to fail as IOMMU SNP sanity checks in SNP firmware will fail with invalid configuration error as below: [ 9.723114] ccp 0000:23:00.1: sev enabled [ 9.727602] ccp 0000:23:00.1: psp enabled [ 9.732527] ccp 0000:a2:00.1: enabling device (0000 -> 0002) [ 9.739098] ccp 0000:a2:00.1: no command queues available [ 9.745167] ccp 0000:a2:00.1: psp enabled [ 9.805337] ccp 0000:23:00.1: SEV-SNP: failed to INIT rc -5, error 0x3 [ 9.866426] ccp 0000:23:00.1: SEV API:1.53 build:5 Fixes: c3b86e61b756 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature") Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Co-developed-by: Vasant Hegde <vasant.hegde@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Acked-by: Joerg Roedel <jroedel@suse.de> Message-ID: <138b520fb83964782303b43ade4369cd181fdd9c.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-15crypto: ccp: Add external API interface for PSP module initializationSean Christopherson1-0/+14
KVM is dependent on the PSP SEV driver and PSP SEV driver needs to be loaded before KVM module. In case of module loading any dependent modules are automatically loaded but in case of built-in modules there is no inherent mechanism available to specify dependencies between modules and ensure that any dependent modules are loaded implicitly. Add a new external API interface for PSP module initialization which allows PSP SEV driver to be loaded explicitly if KVM is built-in. Signed-off-by: Sean Christopherson <seanjc@google.com> Co-developed-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Message-ID: <15279ca0cad56a07cf12834ec544310f85ff5edc.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-15Merge tag 'thermal-6.14-rc3' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "Fix a regression caused by an inadvertent change of the THERMAL_GENL_ATTR_CPU_CAPABILITY value in one of the recent thermal commits (Zhang Rui) and drop a stale piece of documentation (Daniel Lezcano)" * tag 'thermal-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/cpufreq_cooling: Remove structure member documentation thermal/netlink: Prevent userspace segmentation fault by adjusting UAPI header
2025-02-15Merge tag 'mmc-v6.14-rc1' of ↵Linus Torvalds2-41/+20
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - mtk-sd: Fix register settings for hs400(es) mode - sdhci_am654: Revert patch for start-signal-voltage-switch * tag 'mmc-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mtk-sd: Fix register settings for hs400(es) mode Revert "mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch"
2025-02-15Merge tag 'efi-fixes-for-v6.14-1' of ↵Linus Torvalds3-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: "Take the newly introduced EFI_MEMORY_HOT_PLUGGABLE memory attribute into account when placing the kernel image in memory at boot. Otherwise, the presence of the kernel image could prevent such a memory region from being unplugged at runtime if it was 'cold plugged', i.e., already plugged in at boot time (and exposed via the EFI memory map). This should ensure that the new EFI_MEMORY_HOT_PLUGGABLE memory attribute is used consistently by Linux before it ever turns up in production, ensuring that we can make meaningful use of it without running the risk of regressing existing users" * tag 'efi-fixes-for-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: Use BIT_ULL() constants for memory attributes efi: Avoid cold plugged memory for placing the kernel
2025-02-14Merge tag 'arm64-fixes' of ↵Linus Torvalds1-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - Fix kexec and hibernation when using 5-level page-table configuration - Remove references to non-existent SF8MM4 and SF8MM8 ID register fields, hooking up hwcaps for the FPRCVT, F8MM4 and F8MM8 fields instead - Drop unused .ARM.attributes ELF sections - Fix array indexing when probing CPU cache topology from firmware - Fix potential use-after-free in AMU initialisation code - Work around broken GTDT entries by tolerating excessively large timer arrays - Force use of Rust's "softfloat" target to avoid a threatening warning about the NEON target feature - Typo fix in GCS documentation and removal of duplicate Kconfig select * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: rust: clean Rust 1.85.0 warning using softfloat target arm64: Add missing registrations of hwcaps ACPI: GTDT: Relax sanity checking on Platform Timers array count arm64: amu: Delay allocating cpumask for AMU FIE support arm64: cacheinfo: Avoid out-of-bounds write to cacheinfo array arm64: Handle .ARM.attributes section in linker scripts arm64/hwcap: Remove stray references to SF8MMx arm64/gcs: Fix documentation for HWCAP arm64: Kconfig: Remove selecting replaced HAVE_FUNCTION_GRAPH_RETVAL arm64: Fix 5-level paging support in kexec/hibernate trampoline
2025-02-14Merge tag 'iommu-fixes-v6.14-rc2' of ↵Linus Torvalds6-5/+13
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux Pull iommu fixes from Joerg Roedel: - core: fix potential memory leak in iopf_queue_remove_device() - Intel VT-d: handle faults correctly in intel_iommu_drain_pasid_prq() - AMD-Vi: fix faults happening in resume path - typo and spelling fixes * tag 'iommu-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: iommu/vt-d: Make intel_iommu_drain_pasid_prq() cover faults for RID iommu/exynos: Fix typos iommu: Fix a spelling error iommu/amd: Expicitly enable CNTRL.EPHEn bit in resume path iommu: Fix potential memory leak in iopf_queue_remove_device()
2025-02-14Merge tag 'for-linus-6.14-rc3-tag' of ↵Linus Torvalds1-9/+13
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Three fixes to xen-swiotlb driver: - two fixes for issues coming up due to another fix in 6.12 - addition of an __init annotation" * tag 'for-linus-6.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Xen/swiotlb: mark xen_swiotlb_fixup() __init x86/xen: allow larger contiguous memory regions in PV guests xen/swiotlb: relax alignment requirements
2025-02-14serial: 8250: Fix fifo underflow on flushJohn Keeping3-0/+27
When flushing the serial port's buffer, uart_flush_buffer() calls kfifo_reset() but if there is an outstanding DMA transfer then the completion function will consume data from the kfifo via uart_xmit_advance(), underflowing and leading to ongoing DMA as the driver tries to transmit another 2^32 bytes. This is readily reproduced with serial-generic and amidi sending even short messages as closing the device on exit will wait for the fifo to drain and in the underflow case amidi hangs for 30 seconds on exit in tty_wait_until_sent(). A trace of that gives: kworker/1:1-84 [001] 51.769423: bprint: serial8250_tx_dma: tx_size=3 fifo_len=3 amidi-763 [001] 51.769460: bprint: uart_flush_buffer: resetting fifo irq/21-fe530000-76 [000] 51.769474: bprint: __dma_tx_complete: tx_size=3 irq/21-fe530000-76 [000] 51.769479: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294967293 irq/21-fe530000-76 [000] 51.781295: bprint: __dma_tx_complete: tx_size=4096 irq/21-fe530000-76 [000] 51.781301: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294963197 irq/21-fe530000-76 [000] 51.793131: bprint: __dma_tx_complete: tx_size=4096 irq/21-fe530000-76 [000] 51.793135: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294959101 irq/21-fe530000-76 [000] 51.804949: bprint: __dma_tx_complete: tx_size=4096 Since the port lock is held in when the kfifo is reset in uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer hook to adjust the outstanding DMA byte count is sufficient to avoid the kfifo underflow. Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine") Cc: stable <stable@kernel.org> Signed-off-by: John Keeping <jkeeping@inmusicbrands.com> Link: https://lore.kernel.org/r/20250208124148.1189191-1-jkeeping@inmusicbrands.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERYJos Wang1-2/+1
As PD2.0 spec ("6.5.6.2 PSSourceOffTimer")，the PSSourceOffTimer is used by the Policy Engine in Dual-Role Power device that is currently acting as a Sink to timeout on a PS_RDY Message during a Power Role Swap sequence. This condition leads to a Hard Reset for USB Type-A and Type-B Plugs and Error Recovery for Type-C plugs and return to USB Default Operation. Therefore, after PSSourceOffTimer timeout, the tcpm state machine should switch from PR_SWAP_SNK_SRC_SINK_OFF to ERROR_RECOVERY. This can also solve the test items in the USB power delivery compliance test: TEST.PD.PROT.SNK.12 PR_Swap – PSSourceOffTimer Timeout [1] https://usb.org/document-library/usb-power-delivery-compliance-test-specification-0/USB_PD3_CTS_Q4_2025_OR.zip Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable <stable@kernel.org> Signed-off-by: Jos Wang <joswang@lenovo.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Amit Sunil Dhamne <amitsd@google.com> Link: https://lore.kernel.org/r/20250213134921.3798-1-joswang1221@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: roles: set switch registered flag early onElson Roy Serrao1-2/+3
The role switch registration and set_role() can happen in parallel as they are invoked independent of each other. There is a possibility that a driver might spend significant amount of time in usb_role_switch_register() API due to the presence of time intensive operations like component_add() which operate under common mutex. This leads to a time window after allocating the switch and before setting the registered flag where the set role notifications are dropped. Below timeline summarizes this behavior Thread1 | Thread2 usb_role_switch_register() | | | ---> allocate switch | | | ---> component_add() | usb_role_switch_set_role() | | | | | --> Drop role notifications | | since sw->registered | | flag is not set. | | --->Set registered flag.| To avoid this, set the registered flag early on in the switch register API. Fixes: b787a3e78175 ("usb: roles: don't get/set_role() when usb_role_switch is unregistered") Cc: stable <stable@kernel.org> Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250206193950.22421-1-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: gadget: uvc: Fix unstarted kthread workerFrederic Weisbecker1-1/+1
The behaviour of kthread_create_worker() was recently changed to align with the one of kthread_create(). The kthread worker is created but not awaken by default. This is to allow the use of kthread_affine_preferred() and kthread_bind[_mask]() with kthread workers. In order to keep the old behaviour and wake the kthread up, kthread_run_worker() must be used. All the pre-existing users have been converted, except for UVC that was introduced in the same merge window as the API change. This results in hangs: INFO: task UVCG:82 blocked for more than 491 seconds. Tainted: G T 6.13.0-rc2-00014-gb04e317b5226 #1 task:UVCG state:D stack:0 pid:82 Call Trace: __schedule schedule schedule_preempt_disabled kthread ? kthread_flush_work ret_from_fork ret_from_fork_asm entry_INT80_32 Fix this with converting UVCG kworker to the new API. Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202502121025.55bfa801-lkp@intel.com Fixes: f0bbfbd16b3b ("usb: gadget: uvc: rework to enqueue in pump worker from encoded queue") Cc: stable <stable@kernel.org> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20250212135514.30539-1-frederic@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast distLei Huang1-0/+3
Teclast disk used on Huawei hisi platforms doesn't work well, losing connectivity intermittently if LPM is enabled. Add quirk disable LPM to resolve the issue. Signed-off-by: Lei Huang <huanglei@kylinos.cn> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250212093829.7379-1-huanglei814@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: gadget: core: flush gadget workqueue after device removalRoy Luo1-1/+1
device_del() can lead to new work being scheduled in gadget->work workqueue. This is observed, for example, with the dwc3 driver with the following call stack: device_del() gadget_unbind_driver() usb_gadget_disconnect_locked() dwc3_gadget_pullup() dwc3_gadget_soft_disconnect() usb_gadget_set_state() schedule_work(&gadget->work) Move flush_work() after device_del() to ensure the workqueue is cleaned up. Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue") Cc: stable <stable@kernel.org> Signed-off-by: Roy Luo <royluo@google.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250204233642.666991-1-royluo@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14USB: gadget: f_midi: f_midi_complete to call queue_workJill Donahue1-1/+1
When using USB MIDI, a lock is attempted to be acquired twice through a re-entrant call to f_midi_transmit, causing a deadlock. Fix it by using queue_work() to schedule the inner f_midi_transmit() via a high priority work queue from the completion handler. Link: https://lore.kernel.org/all/CAArt=LjxU0fUZOj06X+5tkeGT+6RbXzpWg1h4t4Fwa_KGVAX6g@mail.gmail.com/ Fixes: d5daf49b58661 ("USB: gadget: midi: add midi function driver") Cc: stable <stable@kernel.org> Signed-off-by: Jill Donahue <jilliandonahue58@gmail.com> Link: https://lore.kernel.org/r/20250211174805.1369265-1-jdonahue@fender.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: core: fix pipe creation for get_bMaxPacketSize0Stefan Eichenberger1-2/+1
When usb_control_msg is used in the get_bMaxPacketSize0 function, the USB pipe does not include the endpoint device number. This can cause failures when a usb hub port is reinitialized after encountering a bad cable connection. As a result, the system logs the following error messages: usb usb2-port1: cannot reset (err = -32) usb usb2-port1: Cannot enable. Maybe the USB cable is bad? usb usb2-port1: attempt power cycle usb 2-1: new high-speed USB device number 5 using ci_hdrc usb 2-1: device descriptor read/8, error -71 The problem began after commit 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads"). There usb_get_device_descriptor was replaced with get_bMaxPacketSize0. Unlike usb_get_device_descriptor, the get_bMaxPacketSize0 function uses the macro usb_rcvaddr0pipe, which does not include the endpoint device number. usb_get_device_descriptor, on the other hand, used the macro usb_rcvctrlpipe, which includes the endpoint device number. By modifying the get_bMaxPacketSize0 function to use usb_rcvctrlpipe instead of usb_rcvaddr0pipe, the issue can be resolved. This change will ensure that the endpoint device number is included in the USB pipe, preventing reinitialization failures. If the endpoint has not set the device number yet, it will still work because the device number is 0 in udev. Cc: stable <stable@kernel.org> Fixes: 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads") Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20250203105840.17539-1-eichest@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: dwc3: Fix timeout issue during controller enter/exit from halt stateSelvarasu Ganesan1-0/+34
There is a frequent timeout during controller enter/exit from halt state after toggling the run_stop bit by SW. This timeout occurs when performing frequent role switches between host and device, causing device enumeration issues due to the timeout. This issue was not present when USB2 suspend PHY was disabled by passing the SNPS quirks (snps,dis_u2_susphy_quirk and snps,dis_enblslpm_quirk) from the DTS. However, there is a requirement to enable USB2 suspend PHY by setting of GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY bits when controller starts in gadget or host mode results in the timeout issue. This commit addresses this timeout issue by ensuring that the bits GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting the dwc3_gadget_run_stop sequence and restoring them after the dwc3_gadget_run_stop sequence is completed. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable <stable@kernel.org> Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250201163903.459-1-selvarasu.g@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphoneMathias Nyman1-0/+3
The fastboot tool for communicating with Android bootloaders does not work reliably with this device if USB 2 Link Power Management (LPM) is enabled. Various fastboot commands are affected, including the following, which usually reproduces the problem within two tries: fastboot getvar kernel getvar:kernel FAILED (remote: 'GetVar Variable Not found') This issue was hidden on many systems up until commit 63a1f8454962 ("xhci: stored cached port capability values in one place") as the xhci driver failed to detect USB 2 LPM support if USB 3 ports were listed before USB 2 ports in the "supported protocol capabilities". Adding the quirk resolves the issue. No drawbacks are expected since the device uses different USB product IDs outside of fastboot mode, and since fastboot commands worked before, until LPM was enabled on the tested system by the aforementioned commit. Based on a patch from Forest <forestix@nom.one> from which most of the code and commit message is taken. Cc: stable <stable@kernel.org> Reported-by: Forest <forestix@nom.one> Closes: https://lore.kernel.org/hk8umj9lv4l4qguftdq1luqtdrpa1gks5l@sonic.net Tested-by: Forest <forestix@nom.one> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250206151836.51742-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirkMarek Vasut1-3/+6
Add Renesas R-Car D3 USB Download mode quirk and update comments on all the other Renesas R-Car USB Download mode quirks to discern them from each other. This follows R-Car Series, 3rd Generation reference manual Rev.2.00 chapter 19.2.8 USB download mode . Fixes: 6d853c9e4104 ("usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download mode") Cc: stable <stable@kernel.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20250209145708.106914-1-marek.vasut+renesas@mailbox.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: cdc-acm: Fix handling of oversized fragmentsJann Horn1-1/+1
If we receive an initial fragment of size 8 bytes which specifies a wLength of 1 byte (so the reassembled message is supposed to be 9 bytes long), and we then receive a second fragment of size 9 bytes (which is not supposed to happen), we currently wrongly bypass the fragment reassembly code but still pass the pointer to the acm->notification_buffer to acm_process_notification(). Make this less wrong by always going through fragment reassembly when we expect more fragments. Before this patch, receiving an overlong fragment could lead to `newctrl` in acm_process_notification() being uninitialized data (instead of data coming from the device). Cc: stable <stable@kernel.org> Fixes: ea2583529cd1 ("cdc-acm: reassemble fragmented notifications") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-04-30 07:32:18 +0300