summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-02-17r8169: remove setting PCI_CACHE_LINE_SIZE in rtl_hw_start_8169Heiner Kallweit1-3/+0
This is done for all RTL8169 chip versions in rtl8169_init_phy already. Therefore we can remove it here. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-17r8169: remove unneeded check from rtl_link_chg_patchHeiner Kallweit1-4/+0
rtl_link_chg_patch() can be called from rtl_open() to rtl8169_close() only. And in rtl8169_close() phy_stop() ensures that this function isn't called afterwards. So we don't need this check. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-17net: dsa: bcm_sf2: Also configure Port 5 for 2Gb/sec on 7278Florian Fainelli2-0/+4
Either port 5 or port 8 can be used on a 7278 device, make sure that port 5 also gets configured properly for 2Gb/sec in that case. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-17Merge tag 'mac80211-next-for-net-next-2020-02-14' of ↵David S. Miller5-6/+20
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== A few big new things: * 802.11 frame encapsulation offload support * more HE (802.11ax) support, including some for 6 GHz band * powersave in hwsim, for better testing Of course as usual there are various cleanups and small fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-17ptp_qoriq: drop the code of alarmYangbo Lu1-28/+1
The alarm function hadn't been supported by PTP clock driver. The recommended solution PHC + phc2sys + nanosleep provides best performance. So drop the code of alarm in ptp_qoriq driver. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds33-785/+421
Pull networking fixes from David Miller: 1) Fix interrupt name truncation in mv88e6xxx dsa driver, from Andrew Lunn. 2) Process generic XDP even if SKB is cloned, from Toke Høiland-Jørgensen. 3) Fix leak of kernel memory to userspace in smc, from Eric Dumazet. 4) Add some missing netlink attribute validation to matchall and flower, from Davide Caratti. 5) Send icmp responses properly when NAT has been applied to the frame before we get to the tunnel emitting the icmp, from Jason Donenfeld. 6) Make sure there is enough SKB headroom when adding dsa tags for qca and ar9331. From Per Forlin. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) netdevice.h: fix all kernel-doc and Sphinx warnings net: dsa: tag_ar9331: Make sure there is headroom for tag net: dsa: tag_qca: Make sure there is headroom for tag net, ip6_tunnel: enhance tunnel locate with link check net/smc: no peer ID in CLC decline for SMCD net/smc: transfer fasync_list in case of fallback net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples() net: hns3: fix VF bandwidth does not take effect in some case net: hns3: add management table after IMP reset mac80211: fix wrong 160/80+80 MHz setting cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE xfrm: interface: use icmp_ndo_send helper wireguard: device: use icmp_ndo_send helper sunvnet: use icmp_ndo_send helper gtp: use icmp_ndo_send helper icmp: introduce helper for nat'd source address in network device context net/sched: flower: add missing validation of TCA_FLOWER_FLAGS net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS net/flow_dissector: remove unexist field description page_pool: refill page when alloc.count of pool is zero ...
2020-02-14Merge tag 'pm-5.6-rc2' of ↵Linus Torvalds6-34/+170
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Fix three issues related to the handling of wakeup events signaled through the ACPI SCI while suspended to idle (Rafael Wysocki) and unexport an internal cpufreq variable (Yangtao Li)" * tag 'pm-5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system ACPICA: Introduce acpi_any_gpe_status_set() ACPI: PM: s2idle: Avoid possible race related to the EC GPE ACPI: EC: Fix flushing of pending work cpufreq: Make cpufreq_global_kobject static
2020-02-14Merge tag 'drm-fixes-2020-02-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds51-251/+1131
Pull drm fixes from Dave Airlie: "The core has a build fix for edid code on certain compilers/arches/, one MST fix and one vgem fix. Regular amdgpu fixes, and a couple of small driver fixes. The i915 fixes are bit larger than normal for this stage, but they were having CI issues last week, and they hadn't sent any fixes last week due to this. core: - edid build fix mst: - fix NULL ptr deref vgem: - fix close after free msm: - better dma-api usage sun4i: - disable allow_fb_modifiers amdgpu: - Additional OD fixes for navi - Misc display fixes - VCN 2.5 DPG fix - Prevent build errors on PowerPC on some configs - GDS EDC fix i915: - dsi/acpi fixes - gvt locking and allocation fixes - gem/gt fixes - bios timing parameters fix" * tag 'drm-fixes-2020-02-14' of git://anongit.freedesktop.org/drm/drm: (50 commits) drm/i915: Mark the removal of the i915_request from the sched.link drm/i915/execlists: Reclaim the hanging virtual request drm/i915/execlists: Take a reference while capturing the guilty request drm/i915/execlists: Offline error capture drm/i915/gt: Allow temporary suspension of inflight requests drm/i915: Keep track of request among the scheduling lists drm/i915/gem: Tighten checks and acquiring the mmap object drm/i915: Fix preallocated barrier list append drm/i915/gt: Acquire ce->active before ce->pin_count/ce->pin_mutex drm/i915: Tighten atomicity of i915_active_acquire vs i915_active_release drm/i915: Stub out i915_gpu_coredump_put drm/amdgpu:/navi10: use the ODCAP enum to index the caps array drm/amdgpu: update smu_v11_0_pptable.h drm/amdgpu: correct comment to clear up the confusion drm/amd/display: DCN2.x Do not program DPPCLK if same value drm/amd/display: Don't map ATOM_ENABLE to ATOM_INIT drm/amdgpu/vcn2.5: fix warning drm/amdgpu: limit GDS clearing workaround in cold boot sequence drm/amdgpu: fix amdgpu pmu to use hwc->config instead of hwc->conf amdgpu: Prevent build errors regarding soft/hard-float FP ABI tags ...
2020-02-14net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()Guangbin Huang1-6/+9
The IPv6 address defined in struct in6_addr is specified as big endian, but there is no specified endian in struct hclge_fd_rule_tuples, so it will cause a problem if directly use memcpy() to copy ipv6 address between these two structures since this field in struct hclge_fd_rule_tuples is little endian. This patch fixes this problem by using be32_to_cpu() to convert endian of IPv6 address of struct in6_addr before copying. Fixes: d93ed94fbeaf ("net: hns3: add aRFS support for PF") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: hns3: fix VF bandwidth does not take effect in some caseYonglong Liu1-1/+1
When enabling 4 TC after setting the bandwidth of VF, the bandwidth of VF will resume to default value, because of the qset resources changed in this case. This patch fixes it by using a fixed VF's qset resources according to HNAE3_MAX_TC macro. Fixes: ee9e44248f52 ("net: hns3: add support for configuring bandwidth of VF on the host") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: hns3: add management table after IMP resetYufeng Mo1-0/+7
In the current process, the management table is missing after the IMP reset. This patch adds the management table to the reset process. Fixes: f5aac71c0327 ("net: hns3: add manager table initialization for hardware") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14Merge branch 'pm-cpufreq'Rafael J. Wysocki1-3/+2
* pm-cpufreq: cpufreq: Make cpufreq_global_kobject static
2020-02-14mac80211: Fix setting txpower to zeroBen Greear3-3/+10
With multiple VIFS ath10k, and probably others, tries to find the minimum txpower for all vifs and uses that when setting txpower in the firmware. If a second vif is added and starts to scan, it's txpower is not initialized yet and it set to zero. ath10k had a patch to ignore zero values, but then it is impossible to actually set txpower to zero. So, instead initialize the txpower to INT_MIN in mac80211, and let drivers know that means the power has not been set and so should be ignored. This should fix regression in: commit 88407beb1b1462f706a1950a355fd086e1c450b6 Author: Ryan Hsu <ryanhsu@qca.qualcomm.com> Date: Tue Dec 13 14:55:19 2016 -0800 ath10k: fix incorrect txpower set by P2P_DEVICE interface Tested on ath10k 9984 with ath10k-ct firmware. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20191217183057.24586-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-14Merge tag 'drm-intel-next-fixes-2020-02-13' of ↵Dave Airlie26-178/+990
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc2 Most of these were aimed at a "next fixes" pull already during the merge window, but there were issues with the baseline I used, which resulted in a lot of issues in CI. I've regenerated this stuff piecemeal now, adding gradually to it, and it seems healthy now. Due to the issues this is much bigger than I'd like. But it was obviously necessary to take the time to ensure it's not garbage... Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/878sl6yfrn.fsf@intel.com
2020-02-14Merge tag 'amd-drm-fixes-5.6-2020-02-12' of ↵Dave Airlie16-66/+108
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-02-12: amdgpu: - Additional OD fixes for navi - Misc display fixes - VCN 2.5 DPG fix - Prevent build errors on PowerPC on some configs - GDS EDC fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200212224746.3992-1-alexander.deucher@amd.com
2020-02-14Merge tag 'drm-misc-next-fixes-2020-02-07' of ↵Dave Airlie3-4/+15
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-next fixes for v5.6: - Fix build error in drm/edid. - Plug close-after-free race in vgem_gem_create. - Handle CONFIG_DMA_API_DEBUG_SG better in drm/msm. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/551b6183-a581-9d12-10a9-24cd929de425@linux.intel.com
2020-02-14Merge tag 'drm-misc-fixes-2020-02-07' of ↵Dave Airlie6-3/+18
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v5.6: - Revert allow_fb_modifiers in sun4i, as it causes a regression for DE2 and DE3. - Fix null pointer deref in drm_dp_mst_process_up_req(). Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/672810c3-4212-0a46-337b-2cb855573fd2@linux.intel.com
2020-02-14Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Summary below, but it's all reasonably straightforward. There are some more fixes on the horizon, but nothing disastrous yet. Summary: - Fix build when KASLR is enabled but CONFIG_ARCH_RANDOM is not set - Fix context-switching of SSBS state on systems that implement it - Fix spinlock compiler warning introduced during the merge window - Fix incorrect header inclusion (linux/clk-provider.h) - Use SYSCTL_{ZERO,ONE} instead of rolling our own static variables - Don't scream if optional SMMUv3 PMU irq is missing - Remove some unused function prototypes" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: time: Replace <linux/clk-provider.h> by <linux/of_clk.h> arm64: Fix CONFIG_ARCH_RANDOM=n build perf/smmuv3: Use platform_get_irq_optional() for wired interrupt arm64/spinlock: fix a -Wunused-function warning arm64: ssbs: Fix context-switch when SSBS is present on all CPUs arm64: use shared sysctl constants arm64: Drop do_el0_ia_bp_hardening() & do_sp_pc_abort() declarations
2020-02-14Merge tag 'gpio-v5.6-2' of ↵Linus Torvalds5-20/+35
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - Revert two patches to gpio_do_set_config() and implement the proper solution that works, also drop an unecessary call in set_config() - Fix up the lockdep class for hierarchical IRQ domains. - Remove some bridge code for line directions. - Fix a register access bug in the Xilinx driver. * tag 'gpio-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: sifive: fix static checker warning spmi: pmic-arb: Set lockdep class for hierarchical irq domains gpio: xilinx: Fix bug where the wrong GPIO register is written to gpiolib: remove unnecessary argument from set_config call gpio: bd71828: Remove unneeded defines for GPIO_LINE_DIRECTION_IN/OUT MAINTAINERS: Sort entries in database for GPIO gpiolib: fix gpio_do_set_config() Revert "gpiolib: remove set but not used variable 'config'" Revert "gpiolib: Remove duplicated function gpio_do_set_config()"
2020-02-14wireguard: device: use icmp_ndo_send helperJason A. Donenfeld1-2/+2
Because wireguard is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. This commit adds a small test to the wireguard test suite to ensure that the new functions continue doing the right thing in the context of wireguard. It does this by setting up a condition that will definately evoke an icmp error message from the driver, but along a nat'd path. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14sunvnet: use icmp_ndo_send helperJason A. Donenfeld1-19/+4
Because sunvnet is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. While we're at it, doing the additional route lookup before calling icmp_ndo_send is superfluous, since this is the job of the icmp code in the first place. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14gtp: use icmp_ndo_send helperJason A. Donenfeld1-2/+2
Because gtp is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-12ice: Trivial fixesTony Nguyen11-29/+31
This is a collection of trivial fixes including fixing whitespace, typos, function headers, reverse Christmas tree, etc. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Use correct netif error functionBen Shelton1-1/+1
Use the correct netif_msg_[tx,rx]_error() function to determine whether to print the MDD event type. Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Cleanup ice_vsi_alloc_q_vectorsAnirudh Venkataramanan1-8/+3
1. Remove local variable num_q_vectors and use vsi->num_q_vectors instead 2. Remove local variable pf and pass vsi->back to ice_pf_to_dev Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Make print statements more compactAnirudh Venkataramanan8-227/+123
Formatting strings in print function calls (like dev_info, dev_err, etc.) can exceed 80 columns without making checkpatch unhappy. So remove newlines where applicable and make print statements more compact. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Use ice_pf_to_devAnirudh Venkataramanan6-27/+27
Use ice_pf_to_dev(pf) instead of &pf->pdev->dev Use ice_pf_to_dev(vsi->back) instead of &vsi->back->pdev->dev When a pointer to the pf instance is available, use ice_pf_to_dev instead of ice_hw_to_dev Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Remove possible null dereferenceTony Nguyen1-2/+0
Commit 1f45ebe0d8fb ("ice: add extra check for null Rx descriptor") moved the call to ice_construct_skb() under a null check as Coverity reported a possible use of null skb. However, the original call was not deleted, do so now. Fixes: 1f45ebe0d8fb ("ice: add extra check for null Rx descriptor") Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: update Unit Load Status bitmask to check after resetBruce Allan2-5/+18
After a reset the Unit Load Status bits in the GLNVM_ULD register to check for completion should be 0x7FF before continuing. Update the mask to check (minus the three reserved bits that are always set). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: fix and consolidate logging of NVM/firmware version informationBruce Allan4-28/+13
Logging the firmware/NVM information during driver load is redundant since that information is also available via ethtool. Move the functionality found in ice_nvm_version_str() directly into ice_get_drvinfo() and remove calling the former and logging that info during driver probe. This also gets rid of a bug in ice_nvm_version_str() where it returns a pointer to a buffer which is free'ed when that function exits. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Modify link message loggingAkeem G Abodunrin1-1/+1
This patch modifies link message logging to include "Full Duplex" and "Negotiated" for FEC, so as to distinguish it from "Requested" FEC. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Remove CONFIG_PCI_IOV wrap in ice_set_pf_capsAnirudh Venkataramanan1-2/+0
Remove unnecessary CONFIG_PCI_IOV wrapping in ice_set_pf_caps. None of the data structures accessed within the block are wrapped with this flag. When CONFIG_PCI_IOV is undefined, pf->num_vfs_supported will be 0 anyway. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Remove ice_dev_onetime_setup()Brett Creeley4-20/+0
ice_dev_onetime_setup contains driver workarounds needed for firmware limitations. These issues have now been resolved in newer NVMs so remove the function. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Don't allow same value for Rx tail to be written twiceBrett Creeley1-1/+1
Currently we compare the value we are about to write to the Rx tail register with the previous value of next_to_use. The problem with this is we only write tail on 8 descriptor boundaries, but next_to_use is updated whenever we clean Rx descriptors. Fix this by comparing the value we are about to write to tail with the previously written tail value. This will prevent duplicate Rx tail bumps. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: display supported and advertised link modesPaul Greenwalt1-280/+2
Display all of the supported and advertised link modes based on the PHY capability with media. Displaying all supported modes is more informative then only displaying the current link mode. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Fix switch between FW and SW LLDPDave Ertman1-5/+5
When switching between FW and SW LLDP mode, the number of configured TLV apps in the driver's DCB configuration is getting out of synch with what lldpad thinks is configured. This is causing a problem when shutting down lldpad. The cleanup is trying to delete TLV apps that are not defined in the kernel. Since the driver is keeping an accurate account of the apps defined, use the drivers number of apps to determine if there is an app to delete. If the number of apps is <= 1, then do not attempt to delete. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Fix DCB rebuild after resetDave Ertman2-53/+36
The function ice_dcb_rebuild had some logic flaws in it, and also didn't differentiate between FW and SW modes needs. For FW flow, the willing setting was being forced to OFF and left that way. Unwilling in DCB FW mode is not a supported model. Leave the config alone and use the return value from the set command to determine if setting the config was successful. The SW DCB flow does not need to need to register for MIB change events (as they are not used in SW mode). Use !is_sw_lldp checks to only perform FW specific task while in FW mode. Also adding a reapplication of the current DCB config after a link event. Some NVMs are not maintaining their DCB configs across link events. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12net: ethernet: ave: Add capability of rgmii-id modeKunihiko Hayashi1-0/+9
This allows you to specify the type of rgmii-id that will enable phy internal delay in ethernet phy-mode. This adds all RGMII cases to all of get_pinmode() except LD11, because LD11 SoC doesn't support RGMII due to the constraint of the hardware. When RGMII phy mode is specified in the devicetree for LD11, the driver will abort with an error. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-12enic: prevent waking up stopped tx queues over watchdog resetFiro Yang1-1/+1
Recent months, our customer reported several kernel crashes all preceding with following message: NETDEV WATCHDOG: eth2 (enic): transmit queue 0 timed out Error message of one of those crashes: BUG: unable to handle kernel paging request at ffffffffa007e090 After analyzing severl vmcores, I found that most of crashes are caused by memory corruption. And all the corrupted memory areas are overwritten by data of network packets. Moreover, I also found that the tx queues were enabled over watchdog reset. After going through the source code, I found that in enic_stop(), the tx queues stopped by netif_tx_disable() could be woken up over a small time window between netif_tx_disable() and the napi_disable() by the following code path: napi_poll-> enic_poll_msix_wq-> vnic_cq_service-> enic_wq_service-> netif_wake_subqueue(enic->netdev, q_number)-> test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &txq->state) In turn, upper netowrk stack could queue skb to ENIC NIC though enic_hard_start_xmit(). And this might introduce some race condition. Our customer comfirmed that this kind of kernel crash doesn't occur over 90 days since they applied this patch. Signed-off-by: Firo Yang <firo.yang@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-12drm/i915: Mark the removal of the i915_request from the sched.linkChris Wilson1-0/+2
Keep the rq->fence.flags consistent with the status of the rq->sched.link, and clear the associated bits when decoupling the link on retirement (as we may wish to inspect those flags independent of other state). Fixes: c3f1ed90e6ff ("drm/i915/gt: Allow temporary suspension of inflight requests") References: https://gitlab.freedesktop.org/drm/intel/issues/997 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200122140243.495621-3-chris@chris-wilson.co.uk (cherry picked from commit b4a9a149f91ea345da76bcfe3f8a39715ac346a6) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-12drm/i915/execlists: Reclaim the hanging virtual requestChris Wilson2-0/+185
If we encounter a hang on a virtual engine, as we process the hang the request may already have been moved back to the virtual engine (we are processing the hang on the physical engine). We need to reclaim the request from the virtual engine so that the locking is consistent and local to the real engine on which we will hold the request for error state capturing. v2: Pull the reclamation into execlists_hold() and assert that cannot be called from outside of the reset (i.e. with the tasklet disabled). v3: Added selftest v4: Drop the reference owned by the virtual engine Fixes: ad18ba7b5eeb ("drm/i915/execlists: Offline error capture") Testcase: igt/gem_exec_balancer/hang Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200122140243.495621-2-chris@chris-wilson.co.uk (cherry picked from commit 989df3a7bd2abe566521e61d1aebf603eb013b7f) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-12drm/i915/execlists: Take a reference while capturing the guilty requestChris Wilson2-10/+32
Thanks to preempt-to-busy, we leave the request on the HW as we submit the preemption request. This means that the request may complete at any moment as we process HW events, and in particular the request may be retired as we are planning to capture it for a preemption timeout. Be more careful while obtaining the request to capture after a preemption timeout, and check to see if it completed before we were able to put it on the on-hold list. If we do see it did complete just before we capture the request, proclaim the preemption-timeout a false positive and pardon the reset as we should hit an arbitration point momentarily and so be able to process the preemption. Note that even after we move the request to be on hold it may be retired (as the reset to stop the HW comes after), so we do require to hold our own reference as we work on the request for capture (and all of the peeking at state within the request needs to be carefully protected). Fixes: c3f1ed90e6ff ("drm/i915/gt: Allow temporary suspension of inflight requests") Closes: https://gitlab.freedesktop.org/drm/intel/issues/997 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200122140243.495621-1-chris@chris-wilson.co.uk (cherry picked from commit 4ba5c086a1d8e38d6927967ae1a3271a6ab7a927) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-12drm/i915/execlists: Offline error captureChris Wilson1-2/+120
Currently, we skip error capture upon forced preemption. We apply forced preemption when there is a higher priority request that should be running but is being blocked, and we skip inline error capture so that the preemption request is not further delayed by a user controlled capture -- extending the denial of service. However, preemption reset is also used for heartbeats and regular GPU hangs. By skipping the error capture, we remove the ability to debug GPU hangs. In order to capture the error without delaying the preemption request further, we can do an out-of-line capture by removing the guilty request from the execution queue and scheduling a worker to dump that request. When removing a request, we need to remove the entire context and all descendants from the execution queue, so that they do not jump past. Closes: https://gitlab.freedesktop.org/drm/intel/issues/738 Fixes: 3a7a92aba8fb ("drm/i915/execlists: Force preemption") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200116184754.2860848-3-chris@chris-wilson.co.uk (cherry picked from commit 748317386afb235e11616098d2c7772e49776b58) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-12drm/i915/gt: Allow temporary suspension of inflight requestsChris Wilson5-6/+321
In order to support out-of-line error capture, we need to remove the active request from HW and put it to one side while a worker compresses and stores all the details associated with that request. (As that compression may take an arbitrary user-controlled amount of time, we want to let the engine continue running on other workloads while the hanging request is dumped.) Not only do we need to remove the active request, but we also have to remove its context and all requests that were dependent on it (both in flight, queued and future submission). Finally once the capture is complete, we need to be able to resubmit the request and its dependents and allow them to execute. v2: Replace stack recursion with a simple list. v3: Check all the parents, not just the first, when searching for a stuck ancestor! References: https://gitlab.freedesktop.org/drm/intel/issues/738 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200116184754.2860848-2-chris@chris-wilson.co.uk (cherry picked from commit 32ff621fd74496f0c33644125fb69ff175859b1f) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-12drm/i915: Keep track of request among the scheduling listsChris Wilson4-18/+38
If we keep track of when the i915_request.sched.link is on the HW runlist, or in the priority queue we can simplify our interactions with the request (such as during rescheduling). This also simplifies the next patch where we introduce a new in-between list, for requests that are ready but neither on the run list or in the queue. v2: Update i915_sched_node.link explanation for current usage where it is a link on both the queue and on the runlists. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200116184754.2860848-1-chris@chris-wilson.co.uk (cherry picked from commit 672c368f9398042b629740cc9816e8e939eff2db) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-12Merge tag 'gvt-fixes-2020-02-12' of https://github.com/intel/gvt-linux into ↵Jani Nikula2-2/+6
drm-intel-next-fixes gvt-fixes-2020-02-12 - fix possible high-order allocation fail for late load (Igor) - fix one missed lock for ppgtt mm LRU list (Igor) Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200212065912.GB4997@zhen-hp.sh.intel.com
2020-02-12drm/i915/gem: Tighten checks and acquiring the mmap objectChris Wilson2-30/+21
Make sure we hold the rcu lock as we acquire the rcu protected reference of the object when looking it up from the associated mmap vma. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1083 Fixes: cc662126b413 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200130143931.1906301-1-chris@chris-wilson.co.uk (cherry picked from commit 280d14a69da2e71f43408537c008f2775d5e5360) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-12drm/i915: Fix preallocated barrier list appendJosé Roberto de Souza1-9/+10
Only the first and the last nodes were being added to ref->preallocated_barriers. Renaming variables to make it more easy to read. Fixes: 841350223816 ("drm/i915/gt: Drop mutex serialisation between context pin/unpin") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200129232345.84512-1-jose.souza@intel.com (cherry picked from commit d4c3c0b8221a72107eaf35c80c40716b81ca463e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-12drm/i915/gt: Acquire ce->active before ce->pin_count/ce->pin_mutexChris Wilson2-21/+31
Similar to commit ac0e331a628b ("drm/i915: Tighten atomicity of i915_active_acquire vs i915_active_release") we have the same race of trying to pin the context underneath a mutex while allowing the decrement to be atomic outside of that mutex. This leads to the problem where two threads may simultaneously try to pin the context and the second not notice that they needed to repin the context. <2> [198.669621] kernel BUG at drivers/gpu/drm/i915/gt/intel_timeline.c:387! <4> [198.669703] invalid opcode: 0000 [#1] PREEMPT SMP PTI <4> [198.669712] CPU: 0 PID: 1246 Comm: gem_exec_create Tainted: G U W 5.5.0-rc6-CI-CI_DRM_7755+ #1 <4> [198.669723] Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0054.2017.1025.1822 10/25/2017 <4> [198.669776] RIP: 0010:timeline_advance+0x7b/0xe0 [i915] <4> [198.669785] Code: 00 48 c7 c2 10 f1 46 a0 48 c7 c7 70 1b 32 a0 e8 bb dd e7 e0 bf 01 00 00 00 e8 d1 af e7 e0 31 f6 bf 09 00 00 00 e8 35 ef d8 e0 <0f> 0b 48 c7 c1 48 fa 49 a0 ba 84 01 00 00 48 c7 c6 10 f1 46 a0 48 <4> [198.669803] RSP: 0018:ffffc900004c3a38 EFLAGS: 00010296 <4> [198.669810] RAX: ffff888270b35140 RBX: ffff88826f32ee00 RCX: 0000000000000006 <4> [198.669818] RDX: 00000000000017c5 RSI: 0000000000000000 RDI: 0000000000000009 <4> [198.669826] RBP: ffffc900004c3a64 R08: 0000000000000000 R09: 0000000000000000 <4> [198.669834] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88826f9b5980 <4> [198.669841] R13: 0000000000000cc0 R14: ffffc900004c3dc0 R15: ffff888253610068 <4> [198.669849] FS: 00007f63e663fe40(0000) GS:ffff888276c00000(0000) knlGS:0000000000000000 <4> [198.669857] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [198.669864] CR2: 00007f171f8e39a8 CR3: 000000026b1f6005 CR4: 00000000003606f0 <4> [198.669872] Call Trace: <4> [198.669924] intel_timeline_get_seqno+0x12/0x40 [i915] <4> [198.669977] __i915_request_create+0x76/0x5a0 [i915] <4> [198.670024] i915_request_create+0x86/0x1c0 [i915] <4> [198.670068] i915_gem_do_execbuffer+0xbf2/0x2500 [i915] <4> [198.670082] ? __lock_acquire+0x460/0x15d0 <4> [198.670128] i915_gem_execbuffer2_ioctl+0x11f/0x470 [i915] <4> [198.670171] ? i915_gem_execbuffer_ioctl+0x300/0x300 [i915] <4> [198.670181] drm_ioctl_kernel+0xa7/0xf0 <4> [198.670188] drm_ioctl+0x2e1/0x390 <4> [198.670233] ? i915_gem_execbuffer_ioctl+0x300/0x300 [i915] Fixes: 841350223816 ("drm/i915/gt: Drop mutex serialisation between context pin/unpin") References: ac0e331a628b ("drm/i915: Tighten atomicity of i915_active_acquire vs i915_active_release") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200127152829.2842149-1-chris@chris-wilson.co.uk (cherry picked from commit e5429340bfa2dc43a07c3329e0c30cdae4cc0b35) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-12drm/i915: Tighten atomicity of i915_active_acquire vs i915_active_releaseChris Wilson1-7/+9
As we use a mutex to serialise the first acquire (as it may be a lengthy operation), but only an atomic decrement for the release, we have to be careful in case a second thread races and completes both acquire/release as the first finishes its acquire. Thread A Thread B i915_active_acquire i915_active_acquire atomic_read() == 0 atomic_read() == 0 mutex_lock() mutex_lock() atomic_read() == 0 ref->active(); atomic_inc() mutex_unlock() atomic_read() == 1 i915_active_release atomic_dec_and_test() -> 0 ref->retire() atomic_inc() -> 1 mutex_unlock() So thread A has acquired the ref->active_count but since the ref was still active at the time, it did not initialise it. By switching the check inside the mutex to an atomic increment only if already active, we close the race. Fixes: c9ad602feabe ("drm/i915: Split i915_active.mutex into an irq-safe spinlock for the rbtree") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200126102346.1877661-3-chris@chris-wilson.co.uk (cherry picked from commit ac0e331a628b5ded087eab09fad2ffb082ac61ba) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-18 23:58:18 +0300