summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-04-12Merge branch 'master' into for-davemJohn W. Linville131-2460/+3922
Conflicts: drivers/net/wireless/iwlwifi/iwl-testmode.c net/wireless/nl80211.c
2012-04-12Merge branch 'master' of ↵John W. Linville1205-16889/+48488
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-04-12rt2x00: do not generate seqno in h/w if QOS is disabledStanislaw Gruszka3-2/+24
This is workaround H/W or F/W bug, see in code comments. Without the fix ping can receive duplicated ICMP frames while associated with legacy AP. Reported-by: Walter Goldens <goldenstranger@yahoo.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12net/wireless: ipw2x00: remove ssid_context structStanislav Yakovlev1-9/+0
Driver does not use it any more. Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12net/wireless: ipw2x00: remove unused libipw_measurement_report structStanislav Yakovlev1-55/+0
and all referenced structs and corresponding enums because the driver does not use it. Note: keep libipw_info_element struct since it is still in use. Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12ath5k: Remove extraneous statements from ath5k_hw_proc_4word_tx_status and ↵Qasim Javed1-4/+0
ath5k_hw_proc_2word_status. Signed-off-by: Qasim Javed <qasimj@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12wireless: Remove unnecessary ; from while (0) macrosJoe Perches7-29/+15
Semicolons are not necessary after macros that end in while (0). Remove them. Simplify the macros with tests of do { if (foo>size) memset1; else memset2;} while (0); to a single line memset(,,min_t(size_t, foo, size)) Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12ath9k: Add more recv stats.Ben Greear3-11/+65
This adds counters in various places that can drop packets on rx without otherwise incrementing a counter. It also counts some non-error cases, such as becons and fragments received. Should help with figuring out where packets are (and are not) dropped. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12ath9k: Add tx-failed counter.Ben Greear3-0/+4
This counts any failure during getting packets into the DMA buffers, including out-of-memory, etc. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12ath9k: update to DFS pattern detector interfaceZefir Kurtisi2-52/+36
Follow updates in DFS pattern detector interface: a) use given pulse event structure b) adapt to boolean return value of add_pulse() Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12ath9k: add DFS pattern detector instance to ath_softcZefir Kurtisi2-0/+6
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12ath9k: add DFS pattern detectorZefir Kurtisi5-1/+850
This adds a DFS pattern detector to ath9k. It is fed with pulse events by the radar pulse detector and reports in place whether a pattern was detected. On detection, the result is reported as radar event to the DFS management component in the upper layer. Currently the ETSI DFS domain is supported with detector lines for the patterns defined by EN-301-893 v1.5.1. Support for FCC and JP will be added gradually. To include the pattern detector, ath9k must be built with support for DFS certified config flag set (CONFIG_ATH9K_DFS_CERTIFIED). Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mac80211: add explicit monitor interface if neededJohannes Berg1-1/+2
The queue mapping redesign that I'm planning to do will break pure injection unless we handle monitor interfaces explicitly. One possible option would be to have the driver tell mac80211 about monitor mode queues etc., but that would duplicate the API since we already need to have queue assignments handled per virtual interface. So in order to solve this, have a virtual monitor interface that is added whenever all active vifs are monitors. We could also use the state of one of the monitor interfaces, but managing that would be complicated, so allocate separate state. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12rt2x00: configure different txdesc parameters for non HT channelStanislaw Gruszka3-8/+24
This is needed when we are concted to non 11n AP. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11rtlwifi: Add missing DMA buffer unmapping for PCI driversLarry Finger1-1/+6
In https://bugzilla.kernel.org/show_bug.cgi?id=42976, a system with driver rtl8192se used as an AP suffers from "Out of SW-IOMMU space" errors. These are caused by the DMA buffers used for beacons never being unmapped. This bug was also reported at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/961618 Reported-and-Tested-by: Da Xue <da@lessconfused.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11rtlwifi: Preallocate USB read buffers and eliminate kalloc in read routineLarry Finger2-19/+21
The current version of rtlwifi for USB operations uses kmalloc to acquire a 32-bit buffer for each read of the device. When _usb_read_sync() is called with the rcu_lock held, the result is a "sleeping function called from invalid context" BUG. This is reported for two cases in https://bugzilla.kernel.org/show_bug.cgi?id=42775. The first case has the lock originating from within rtlwifi and could be fixed by rearranging the locking; however, the second originates from within mac80211. The kmalloc() call is removed from _usb_read_sync() by creating a ring buffer pointer in the private area and allocating the buffer data in the probe routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [This version good for 3.3+ - different patch for 3.2 - 2.6.39] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11team: add missed "statics"Jiri Pirko3-5/+5
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: ab: walk through port list non-rcuJiri Pirko1-1/+1
Since team->lock is being held, _rcu variant make no sense. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add user_linkup and user_linkup_enabled per-port optionJiri Pirko1-9/+63
Allows userspace to setup linkup for ports. Default is to take linkup directly from ethtool state. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add bool option typeJiri Pirko1-11/+29
Add another (hopefully last) option type. Use NLA_FLAG to implement that. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add support for per-port optionsJiri Pirko3-87/+261
This patch allows to create per-port options. That becomes handy for all sorts of stuff, for example for userspace driven link-state, 802.3ad implementation and so on. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-10b43: claim support for IBSS RSNAntonio Quartulli1-0/+16
The driver now claims to support IBSS/RSN. Group key configuration in hardware is skipped. Software encryption is used for multicast communications. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211_hwsim: Fill timestamp beacon at the time it is transmittedJavier Cardona1-13/+13
Generate more acurate tsf values in hwsim by setting the tsf value on trasmitted beacons immediately before they are moved to the rx path. Also, adjust the beacon timestamp to be the time at which the first byte of the timestamp is transmitted. With these changes the observed tsf offset between two hwsim/mesh peers is 0 (unless the offset is modified via debugfs) Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: remove antenna_sel_tx TX info fieldJohannes Berg7-22/+9
This field is never set to anything non-zero in mac80211, so we should be able to remove it. Unfortunately though, the iwlwifi and iwlegacy drivers use it for their internal TX status processing (which shouldn't be using the rate control API to start with), so add a new field "status.antenna" for them, at least for now. In the future, I plan to use the new field to hold the hardware queue, while the SKB's queue mapping holds the AC. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: notify driver of rate control updatesJohannes Berg1-1/+1
Devices that have internal rate control need to be notified when the bandwidth or SMPS state changes just like external rate control algorithms get a notification now. Add this notification and clarify the change bits while at it, the HT_CHANGED bit really meant only bandwidth changed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: remove channel type argument from rate_updateJohannes Berg2-5/+3
The channel type argument to the rate_update() callback isn't really the correct way to give the rate control algorithm about the desired RX bandwidth of the peer. Remove this argument, and instead update the STA capabilities with 20/40 appropriately. The SMPS update done by this callback works in the same way, so this makes the callback cleaner. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mwifiex: don't use IEEE80211_MAX_QUEUESJohannes Berg2-5/+5
IEEE80211_MAX_QUEUES is an internal mac80211 value, it is not guaranteed to be always 4. The firmware API in mwifiex almost certainly doesn't care about mac80211 changing though, so mwifiex shouldn't use this value. Maybe it should use IEEE80211_NUM_ACS instead and that is what I'm doing here as at least that value will probably never change, but maybe it should have its own define instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: don't always advertise remain-on-channelJohannes Berg5-3/+9
Not all devices are really capable of implementing remain-on-channel, even if it is implemented in SW, as they can't necessarily deal with channel changes while associated. Remove the WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL and add it only if either the driver has remain_on_channel implemented in the driver/device. Also add it to all drivers that advertise P2P right now since those definitely have to have it working. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10rtlwifi: Add missing DMA buffer unmapping for PCI driversLarry Finger1-1/+6
In https://bugzilla.kernel.org/show_bug.cgi?id=42976, a system with driver rtl8192se used as an AP suffers from "Out of SW-IOMMU space" errors. These are caused by the DMA buffers used for beacons never being unmapped. This bug was also reported at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/961618 Reported-and-Tested-by: Da Xue <da@lessconfused.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: Add pr_fmtJoe Perches2-0/+6
Prefix dmesg output with "iwlwifi: " by adding #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: fix unused variable warningOliver Hartkopp1-1/+2
In the case of disabled CONFIG_IWLWIFI_DEBUGFS option the compiler complains about the unused variable 'img'. Fix this by moving the 'img' definition. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10ath5k: Introduce _ath5k_printk to reduce code/textJoe Perches2-4/+25
Macros can be converted to functions to reduce overall object size. Convert the ATH5K_PRINTK macro to use _ath5k_printk. Allyesconfig size is reduced ~10% $ size drivers/net/wireless/ath/ath5k/built-in.o* text data bss dec hex filename 211557 2032 40672 254261 3e135 drivers/net/wireless/ath/ath5k/built-in.o.new 235412 2032 47296 284740 45844 drivers/net/wireless/ath/ath5k/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10ath: Add and use pr_fmt, convert printks to pr_<level>Joe Perches26-68/+106
Use a more current logging style. Make sure all output is prefixed appropriately. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1164-16695/+47894
2012-04-10Revert "ath9k: fix going to full-sleep on PS idle"Sujith Manoharan1-5/+3
This reverts commit c1afdaff90538ef085b756454f12b29575411214. Users have reported connection failures in 3.3.1 and suspend/resume failures in 3.4-rcX. Revert this commit for now - PS IDLE can be fixed in a clean manner later on. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10rt2x00: Fix rfkill_polling register function.Chen, Chien-Chia1-5/+1
Move rt2x00rfkill_register(rt2x00dev) to rt2x00lib_probe_dev function. It fixes of starting rfkill_poll function at the right time if sets hard rfkill block and reboot. rt2x00mac_rfkill_poll should be starting before bringing up the wireless interface. Signed-off-by: Chen, Chien-Chia <machen@suse.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> CC: Kevin Chou <kevin.chou@mediatek.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10bcma: fix build error on MIPS; implicit pcibios_enable_devicePaul Gortmaker2-1/+2
The following is seen during allmodconfig builds for MIPS: drivers/bcma/driver_pci_host.c:518:2: error: implicit declaration of function 'pcibios_enable_device' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [drivers/bcma/driver_pci_host.o] Error 1 Most likey introduced by commit 49dc9577155576b10ff79f0c1486c816b01f58bf "bcma: add PCIe host controller" Add the header instead of implicitly assuming it will be present. Sounds like a good idea, but that alone doesn't fix anything. The real problem is that the Kconfig has settings related to whether PCI is possible, i.e. config BCMA_HOST_PCI_POSSIBLE bool depends on BCMA && PCI = y default y config BCMA_HOST_PCI bool "Support for BCMA on PCI-host bus" depends on BCMA_HOST_PCI_POSSIBLE ...but what is missing is that BCMA_DRIVER_PCI_HOSTMODE doesn't have any dependencies on the above. Add one. CC: Hauke Mehrtens <hauke@hauke-m.de> CC: John W. Linville <linville@tuxdriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10wiznet: Fix Kconfig dependencies.David S. Miller1-0/+4
Both drivers need to depend upon HAS_IOMEM, otherwise we get a build failure on platforms like S390. All the driver specific config options need to depend upon the drivers themselves. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-10iwlwifi: split POWER_PMI status bitDon Fry9-7/+39
Move the POWER_PMI to the op_mode where it is changed. The trans needs to check it frequently, so shadow the status in the trans and update it in trans when it infrequently changes. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: move FW_ERROR to privDon Fry6-18/+12
The op_mode should check for FW_ERROR before calling send_cmd. This removes the need to test for FW_ERROR in the trans layer. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: remove firmware info from iwl_sharedMeenakshi Venkataraman2-12/+9
With error logging now completely handled in the op_mode, the transport layer does not need to know information about the loaded firmware. Remove this state information from the iwl_shared data structure. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: move iwl_get_single_channel_number and mark it staticMeenakshi Venkataraman3-42/+40
iwl_get_single_channel_number is used only in iwl-scan.c, move it there and mark it static. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: move iwl_full_rxon_required and mark it staticMeenakshi Venkataraman3-65/+64
iwl_full_rxon_required is used only in iwl-agn-rxon.c. Move it there and mark it static. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: move iwl_check_rxon_cmd and mark it staticMeenakshi Venkataraman3-73/+73
iwl_check_rxon_cmd is used only in iwl-agn-rxon.c. Move it there and mark it static. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: move iwl_set_rxon_hwcrypto and mark it staticMeenakshi Venkataraman3-14/+12
iwl_set_rxon_hwcrypto is used only in iwl-agn-rxon.c. Move it there and mark it static. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: Move iwl_send_rxon_timing and make it staticMeenakshi Venkataraman3-104/+103
iwl_send_rxon_timing is used only in iwl-agn-rxon.c, move it there and mark it static. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: move iwl_init_geos to iwl-agn.cMeenakshi Venkataraman3-190/+183
This is used only in one file, move it there and make it static. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: move ucode_type from shared to op_modeMeenakshi Venkataraman6-19/+18
This variable holds the ucode currently running on the device; which is determined by op_mode, so move this parameter there. Also, the name of the variable is a bit misleading, so rename it to cur_ucode. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: move ucode error log reporting to op_modeMeenakshi Venkataraman10-430/+432
Error log reporting does not belong to the transport layer, but to the op_mode loading the ucode, as it is the entity which knows about the ucode loaded, and what the error information means. Move device logging pointers from the transport layer to op_mode. With this change, transport layer only reports an error to the op_mode, which will figure out what to do with the error. This causes the driver to now dump out error logs when the command queue is stuck as well. Also, move the debugfs entry for event logs out of the transport layer and into op_mode. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: make iwl_nic_error staticMeenakshi Venkataraman3-8/+7
iwl_nic_error is used in iwl-agn.c only, move it there and make it static. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-22 23:37:24 +0300