summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2009-12-13Merge branch 'ixp4xx' of ↵Linus Torvalds2-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 * 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6: IXP4xx: GTWX5715 platform only has two PCI IRQ lines, not four. IXP4xx: Introduce IXP4XX_GPIO_IRQ(n) macro and convert IXP4xx platform files. IXP4xx: move Gemtek GTWX5715 platform macros to the platform code. IXP4xx: Remove unused Motorola PrPMC1100 platform macros. IXP4xx: move FSG platform macros to the platform code. IXP4xx: move DSM G600 platform macros to the platform code. IXP4xx: move NAS100D platform macros to the platform code. IXP4xx: move NSLU2 platform macros to the platform code. IXP4xx: move Coyote platform macros to the platform code. IXP4xx: move AVILA platform macros to the platform code. IXP4xx: move IXDP425 platform macros to the platform code. IXP4xx: Extend PCI MMIO indirect address space to 1 GB. IXP4xx: Fix compilation failure with CONFIG_IXP4XX_INDIRECT_PCI. IXP4xx: Drop "__ixp4xx_" prefix from in/out/ioread/iowrite functions for clarity. IXP4xx: Rename indirect MMIO primitives from __ixp4xx_* to __indirect_*. IXP4xx: Ensure index is positive in irq_to_gpio() and npe_request(). ARM: fix insl() and outsl() endianness on IXP4xx architecture. IXP4xx: Fix normally-disabled debugging text in drivers/net/arm/ixp4xx_eth.c. IXP4xx: change the timer base frequency to 66.666000 MHz.
2009-12-13tty: Fix BKL taken under a spinlock bug introduced in the BKL splitAlan Cox1-2/+0
The fasync path takes the BKL (it probably doesn't need to in fact) while holding the file_list spinlock. You can't do that with the kernel lock: it causes lock inversions and deadlocks. Leave the BKL over that bit for the moment. Identified by AKPM. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-and-Tested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-13Merge branch 'next' of ↵Linus Torvalds29-867/+3247
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (151 commits) powerpc: Fix usage of 64-bit instruction in 32-bit altivec code MAINTAINERS: Add PowerPC patterns powerpc/pseries: Track previous CPPR values to correctly EOI interrupts powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP powerpc: Make "intspec" pointers in irq_host->xlate() const powerpc/8xx: DTLB Miss cleanup powerpc/8xx: Remove DIRTY pte handling in DTLB Error. powerpc/8xx: Start using dcbX instructions in various copy routines powerpc/8xx: Restore _PAGE_WRITETHRU powerpc/8xx: Add missing Guarded setting in DTLB Error. powerpc/8xx: Fixup DAR from buggy dcbX instructions. powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions. powerpc/8xx: Update TLB asm so it behaves as linux mm expects. powerpc/8xx: Invalidate non present TLBs powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate pseries/pseries: Add code to online/offline CPUs of a DLPAR node powerpc: stop_this_cpu: remove the cpu from the online map. powerpc/pseries: Add kernel based CPU DLPAR handling sysfs/cpu: Add probe/release files powerpc/pseries: Kernel DLPAR Infrastructure ...
2009-12-12Merge branch 'omap-for-linus' of ↵Linus Torvalds2-47/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (75 commits) omap3: Fix OMAP35XX_REV macros omap: serial: fix non-empty uart fifo read abort omap3: Zoom2/3: Update hsmmc board config params omap3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards omap3: id code detection 3525 vs 3515 omap3: rx51: Use wl1251 in SPI mode 3 omap3: zoom2/3: make MMC slot work again omap1: htcherald: Update defconfig to include mux support omap1: LCD_DMA: Use some define rather than a hexadecimal omap: header: remove unused data-type omap: arch/arm/plat-omap/devices.c - sort alphabetically omap: Correcting GPMC_CONFIG1_DEVICETYPE_NAND OMAP3: serial - allow platforms specify which UARTs to initialize omap3: cm-t35: add mux initialization OMAP4: Sync up omap4430 defconfig OMAP4: Remove the secondary wait loop OMAP4: AuxCoreBoot registers only accessible in secure mode OMAP4: Fix SRAM base and size OMAP4: Fix cpu detection omap3: pandora: board file updates for .33 ...
2009-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds5-14/+25
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: be2net: fix error in rx completion processing. igbvf: avoid reset storms due to mailbox issues igb: fix handling of mailbox collisions between PF/VF usb: remove rare pm primitive for conversion to new API
2009-12-12be2net: fix error in rx completion processing.Ajit Khaparde1-2/+2
There are certain skews of the NIC which have multiple bits set in adapter->cap. Use & instead of == to process rx completions. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-12igbvf: avoid reset storms due to mailbox issuesAlexander Duyck2-1/+8
From: Alexander Duyck <alexander.h.duyck@intel.com> This change makes it so that reset/interrupt storms can be avoided when there are mailbox issues. The new behavior is to only allow the device to trigger mailbox related resets only once every 10 seconds. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-12igb: fix handling of mailbox collisions between PF/VFAlexander Duyck1-9/+13
This patch changes the handling of collisions between the use of the PF/VF sides of the mailbox. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-12usb: remove rare pm primitive for conversion to new APIOliver Neukum1-2/+2
This patch removes a rare use of the USB power management API which won't be supported after the conversion to the new generic runtime power management framework. Functionality is not altered. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds41-401/+1346
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (75 commits) net: Handle NETREG_UNINITIALIZED devices correctly can: add the driver for Analog Devices Blackfin on-chip CAN controllers xfrm: Fix truncation length of authentication algorithms installed via PF_KEY net: use compat helper functions in compat_sys_recvmmsg net: fix compat_sys_recvmmsg parameter type cxgb3: Fixing EEH handlers cnic: Zero out status block and Event Queue indices. cnic: Send delete command when shutting down iSCSI ring. net: smc91x: Fix up type mismatch in smc_drv_resume(). smc91x: fix unused flags warnings on UP systems MAINTAINERS: Transfering maintainership of cdc-ether net: Add missing TST_CFG_WRITE bits around sky2_pci_write net: Fix Yukon-2 Optima TCP offload setup net: niu uses crc32, so select CRC32 wireless: update old static regulatory domain rules mac80211: Revert 'Use correct sign for mesh active path refresh' mac80211: Fixed bug in mesh portal paths net/mac80211: Correct size given to memset b43: Remove reset after fatal DMA error rtl8187: add radio led and fix warnings on suspend ...
2009-12-12Merge branch 'compat-ioctl-merge' of ↵Linus Torvalds2-37/+188
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground * 'compat-ioctl-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: usbdevfs: move compat_ioctl handling to devio.c lp: move compat_ioctl handling into lp.c compat_ioctl: pass compat pointer directly to handlers compat_ioctl: simplify lookup table compat_ioctl: simplify calling of handlers compat_ioctl: inline all conversion handlers compat_ioctl: Remove BKL compat_ioctl: remove all VT ioctl handling
2009-12-12Merge branch 'for-linus' of git://codeaurora.org/quic/kernel/dwalker/linux-msmLinus Torvalds2-5/+2
* 'for-linus' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: HTC Dream: mmc compilation fixes video: Allow selecting MSM framebuffer in Kconfig Add arm msm maintainer entry msm: Add memory map for HTC Dream msm: add minimal board file for HTC Dream device msm: make debugging UART (for DEBUG_LL) configurable
2009-12-12Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2059-209334/+309538
Conflicts: include/net/tcp.h
2009-12-12omap1: LCD_DMA: Use some define rather than a hexadecimalJanusz Krzysztofik1-32/+1
The patch corrects the issue introduced with one of my earlier patches: OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set[1] as pointed out by OMAP subsystem maintainer. Applies on top of my prevoius patch: OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1[2] Tested on Amstrad Delta Compile tested with omap_generic_2420_defconfig [1] http://patchwork.kernel.org/patch/57922/ [2] http://patchwork.kernel.org/patch/61952/ Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12smc91x: remove OMAP specific bitsLadislav Michl1-15/+0
Now that all OMAP boards are using the board resources, we don't need to keep the arch/board specific crap in the driver header. Cc: linux-net@vger.kernel.org Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12Merge branch 'next' of ↵Linus Torvalds3-24/+152
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [ACPI/CPUFREQ] Introduce bios_limit per cpu cpufreq sysfs interface [CPUFREQ] make internal cpufreq_add_dev_* static [CPUFREQ] use an enum for speedstep processor identification [CPUFREQ] Document units for transition latency [CPUFREQ] Use global sysfs cpufreq structure for conservative governor tunings [CPUFREQ] Documentation: ABI: /sys/devices/system/cpu/cpu#/cpufreq/ [CPUFREQ] powernow-k6: set transition latency value so ondemand governor can be used [CPUFREQ] cpumask: don't put a cpumask on the stack in x86...cpufreq/powernow-k8.c
2009-12-12Staging: batman: fix debug Kconfig optionGreg Kroah-Hartman1-1/+1
The debug batman option needs to depend on the correct config option. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> [ "No means no!" - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds26-3540/+874
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (58 commits) tty: split the lock up a bit further tty: Move the leader test in disassociate tty: Push the bkl down a bit in the hangup code tty: Push the lock down further into the ldisc code tty: push the BKL down into the handlers a bit tty: moxa: split open lock tty: moxa: Kill the use of lock_kernel tty: moxa: Fix modem op locking tty: moxa: Kill off the throttle method tty: moxa: Locking clean up tty: moxa: rework the locking a bit tty: moxa: Use more tty_port ops tty: isicom: fix deadlock on shutdown tty: mxser: Use the new locking rules to fix setserial properly tty: mxser: use the tty_port_open method tty: isicom: sort out the board init logic tty: isicom: switch to the new tty_port_open helper tty: tty_port: Add a kref object to the tty port tty: istallion: tty port open/close methods tty: stallion: Convert to the tty_port_open/close methods ...
2009-12-12Merge branch 'for_linus' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (21 commits) ext3: PTR_ERR return of wrong pointer in setup_new_group_blocks() ext3: Fix data / filesystem corruption when write fails to copy data ext4: Support for 64-bit quota format ext3: Support for vfsv1 quota format quota: Implement quota format with 64-bit space and inode limits quota: Move definition of QFMT_OCFS2 to linux/quota.h ext2: fix comment in ext2_find_entry about return values ext3: Unify log messages in ext3 ext2: clear uptodate flag on super block I/O error ext2: Unify log messages in ext2 ext3: make "norecovery" an alias for "noload" ext3: Don't update the superblock in ext3_statfs() ext3: journal all modifications in ext3_xattr_set_handle ext2: Explicitly assign values to on-disk enum of filetypes quota: Fix WARN_ON in lookup_one_len const: struct quota_format_ops ubifs: remove manual O_SYNC handling afs: remove manual O_SYNC handling kill wait_on_page_writeback_range vfs: Implement proper O_SYNC semantics ...
2009-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds679-174515/+165727
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (235 commits) Staging: IIO: add selection of IIO_SW_RING to LIS3L02DQ as needed Staging: IIO: Add tsl2560-2 support to tsl2563 driver. Staging: IIO: Remove tsl2561 driver. Support merged with tsl2563. Staging: wlags49_h2: fix up signal levels + drivers-staging-wlags49_h2-remove-cvs-metadata.patch added to -mm tree Staging: samsung-laptop: add TODO file Staging: samsung-laptop: remove old kernel code Staging: add Samsung Laptop driver staging: batman-adv meshing protocol Staging: rtl8192u: depends on USB Staging: rtl8192u: remove dead code Staging: rtl8192u: remove bad whitespaces Staging: rtl8192u: make it compile Staging: Added Realtek rtl8192u driver to staging Staging: dream: add gpio and pmem support Staging: dream: add TODO file Staging: android: delete android drivers Staging: et131x: clean up the avail fields in the rx registers Staging: et131x: Clean up number fields Staging: et131x: kill RX_DMA_MAX_PKT_TIME ...
2009-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds10-80/+124
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (27 commits) Driver core: fix race in dev_driver_string Driver Core: Early platform driver buffer sysfs: sysfs_setattr remove unnecessary permission check. sysfs: Factor out sysfs_rename from sysfs_rename_dir and sysfs_move_dir sysfs: Propagate renames to the vfs on demand sysfs: Gut sysfs_addrm_start and sysfs_addrm_finish sysfs: In sysfs_chmod_file lazily propagate the mode change. sysfs: Implement sysfs_getattr & sysfs_permission sysfs: Nicely indent sysfs_symlink_inode_operations sysfs: Update s_iattr on link and unlink. sysfs: Fix locking and factor out sysfs_sd_setattr sysfs: Simplify iattr time assignments sysfs: Simplify sysfs_chmod_file semantics sysfs: Use dentry_ops instead of directly playing with the dcache sysfs: Rename sysfs_d_iput to sysfs_dentry_iput sysfs: Update sysfs_setxattr so it updates secdata under the sysfs_mutex debugfs: fix create mutex racy fops and private data Driver core: Don't remove kobjects in device_shutdown. firmware_class: make request_firmware_nowait more useful Driver-Core: devtmpfs - set root directory mode to 0755 ...
2009-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds91-1811/+9254
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (122 commits) USB: mos7840: add device IDs for B&B electronics devices USB: ftdi_sio: add USB device ID's for B&B Electronics line USB: musb: musb_host: fix sparse warning USB: musb: musb_gadget: fix sparse warning USB: musb: omap2430: fix sparse warning USB: core: message: fix sparse warning USB: core: hub: fix sparse warning USB: core: fix sparse warning for static function USB: Added USB_ETH_RNDIS to use instead of CONFIG_USB_ETH_RNDIS USB: Check bandwidth when switching alt settings. USB: Refactor code to find alternate interface settings. USB: xhci: Fix command completion after a drop endpoint. USB: xhci: Make reverting an alt setting "unfailable". USB: usbtmc: Use usb_clear_halt() instead of custom code. USB: xhci: Add correct email and files to MAINTAINERS entry. USB: ehci-omap.c: introduce missing kfree USB: xhci-mem.c: introduce missing kfree USB: add remove_id sysfs attr for usb drivers USB: g_multi kconfig: fix depends and help text USB: option: add pid for ZTE ...
2009-12-12Merge branch 'for-linus' of ↵Linus Torvalds1-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: handle receive packets with a data length of zero
2009-12-12Merge branch 'for_linus' of ↵Linus Torvalds1-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: Always process the whole breakpoint list on activate or deactivate kgdb: continue and warn on signal passing from gdb kgdb,x86: do not set kgdb_single_step on x86 kgdb: allow for cpu switch when single stepping kgdb,i386: Fix corner case access to ss with NMI watch dog exception kgdb: Replace strstr() by strchr() for single-character needles kgdbts: Read buffer overflow kgdb: Read buffer overflow kgdb,x86: remove redundant test
2009-12-12tty: split the lock up a bit furtherAlan Cox1-0/+3
The tty count sanity check may need the BKL, that isn't clear. However it is clear that the count use of the lock is internal and independant of the bigger use of the lock. Furthermore the file list locking is also separately locked already Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: Move the leader test in disassociateAlan Cox1-2/+3
There are two call points, both want to check that tty->signal->leader is set. Move the test into disassociate_ctty() as that will make locking changes easier in a bit Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: Push the bkl down a bit in the hangup codeAlan Cox1-2/+2
We know that the redirect field is handled via its own locking in all places Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: Push the lock down further into the ldisc codeAlan Cox2-5/+9
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: push the BKL down into the handlers a bitAlan Cox3-62/+94
Start trying to untangle the remaining BKL mess Updated to fix missing unlock_kernel noted by Dan Carpenter Signed-off-by: Alan "I must be out of my tree" Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: moxa: split open lockAlan Cox1-12/+11
moxa_openlock is used for several situations where we want to handle the case of an ioctl that crosses many ports (not just the open tty), and also cases where an open races a deinit (eg a pci unplug) and we hangup a port before we can cope with that. The non open race cases can use the moxa_lock spinlock. This simplifies sorting out the remaining mess. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: moxa: Kill the use of lock_kernelAlan Cox1-14/+2
It isn't needed here any more Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: moxa: Fix modem op lockingAlan Cox1-15/+10
This is overkill and mostly not needed Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: moxa: Kill off the throttle methodAlan Cox1-20/+1
The tty flag can be tested so the shadow flag isn't needed Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: moxa: Locking clean upAlan Cox1-33/+25
- The open lock is needed to fix up the case of a board reset occuring during tty open but too early for a sane hangup response. - The lock can however got for other cases - Use the port mutex for get/setserial - Fix up the confused lack of locking on the THROTTLE and other bits in the private flags. Just use set/test/clear bit and it covers the cases we need Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: moxa: rework the locking a bitAlan Cox1-5/+22
Introduce a lock for moxafunc() to protect the cases where were get collisions between two function requests at the same time. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: moxa: Use more tty_port opsAlan Cox1-116/+21
Rework a few bits of this into tty_port format Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: isicom: fix deadlock on shutdownAlan Cox1-1/+1
Alexander Strakh <strakh@ispras.ru> reported KERNEL_VERSION: 2.6.31 DESCRIBE: Driver drivers/char/isicom.c might sleep in atomic context, because it calls tty_port_xmit_buf under spin_lock. ./drivers/char/isicom.c: 1307 static void isicom_hangup(struct tty_struct *tty) 1308 { ... 1315 spin_lock_irqsave(&port->card->card_lock, flags); 1316 isicom_shutdown_port(port); ... Path to might_sleep macro from isicom_hangup: 1. isicom_hangup calls spin_lock_irqsave (drivers/char/isicom.c:1315) and then calls isicom_shutdown_port. 2. isiscom_shutdown_port calls tty_port_free_xmit_buf at drivers/char/isicom.c:906 3. tty_port_free_xmit_buf calls mutex_lock at drivers/char/tty_port:48 Found by Linux Driver Verification Project. Reported-by: Alexander Strakh <strakh@ispras.ru> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: mxser: Use the new locking rules to fix setserial properlyAlan Cox1-67/+78
Propogate the init/shutdown mutex through the setserial logic. Use the proper locks for the various bits still using the BKL. Kill the BKL in this driver. Updated to fix the bug noted by Dan Carpenter Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: mxser: use the tty_port_open methodAlan Cox1-76/+35
At first this looks a fairly trivial conversion but we can't quite push everything into the right format yet. The open side is easy but care is needed over the setserial methods. Fix up the locking now that we've adopted the port->mutex locking rule for the initialization. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: isicom: sort out the board init logicAlan Cox1-30/+11
Split this into two flags - INIT meaning the board is set up and ACTIVE meaning the board has ports open. Remove the broken HUPCL casing and push the counts somewhere sensible. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: isicom: switch to the new tty_port_open helperAlan Cox1-67/+21
Trivial conversion in this case so might as well do it while testing the port_open design is right Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: tty_port: Add a kref object to the tty portAlan Cox1-0/+18
Users of tty port need a way to refcount ports when hotplugging is involved. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: istallion: tty port open/close methodsAlan Cox1-117/+60
Slice/dice/repeat as with the stallion driver this is just code shuffling and removal Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: stallion: Convert to the tty_port_open/close methodsAlan Cox1-81/+35
The driver is already structured this way so just slice and dice Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: tty_port: Move the IO_ERROR clearAlan Cox1-1/+1
Some devices want to set IO_ERROR in their activate methods so that you can be handed a 'dead' port for operations like setserial. Thus we need to clear the flag before activate so that activate can choose to set the flag and still return 0. This is fine as the file handle/tty are not accessible to the user yet. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: tty_port: Add IO_ERROR bit handlingAlan Cox1-1/+5
To propogate tty_port_open/close to a few other devices we need to start handling the IO_ERROR flag on the tty. We can do this pretty trivially. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: riscom8: switch to the tty_port_open APIAlan Cox1-48/+41
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: tty_port: Change the buffer allocator lockingAlan Cox1-4/+5
We want to be able to do this without regard for the activate/own open method being used which causes a problem using port->mutex. Add another mutex for now. Once everything uses port_open to do buffer allocs we can kill it back off Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: sdio_uart: Fix the locking on "func" for new codeAlan Cox1-0/+4
The new dtr_rts function didn't take the port->func lock as it should so add use of the lock there. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-12tty: sdio_uart: add modem functionalityAlan Cox1-1/+32
Add the POSIX block for carrier Linux TIOCMIWAIT functionality is still lacking from the driver. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-14 04:06:17 +0300