summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-06-01thunderbolt: Allocate credits according to router preferencesMika Westerberg3-74/+346
The USB4 Connection Manager guide provides detailed information how the USB4 router buffer (credit) allocation information should be used by the connection manager when it allocates buffers for different paths. This patch implements it for Linux. For USB 3.x and DisplayPort we use directly the router preferences. The rest of the buffer space is then used for PCIe and DMA (peer-to-peer, XDomain) traffic. DMA tunnels require at least one buffer and PCIe six, so if there is not enough buffers we fail the tunnel creation. For the legacy Thunderbolt 1-3 devices we use the existing hard-coded scheme except for DMA where we use the values suggested by the USB4 spec chapter 13. Co-developed-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-06-01thunderbolt: Update port credits after bonding is enabled/disabledMika Westerberg3-0/+51
Once lane bonding has been enabled (or disabled) both lane adapters may update their total credits accordingly. For this reason re-read the port credits after lane bonding has been enabled or disabled. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-06-01thunderbolt: Read router preferred credit allocation informationMika Westerberg4-8/+221
USB4 routers must expose their preferred credit (buffer) allocation information through router operation. This information tells the connection manager how the router prefers its buffers to be allocated to get the expected bandwidth for the supported protocols. Read this information and store it as part of struct tb_switch for each USB4 router. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-06-01thunderbolt: Wait for the lanes to actually bondMika Westerberg3-2/+58
It may take some time until the two lanes enter bonded state so poll for the link width to match what is expected before going forward. This ensures the link is in expected state before we start establishing paths through it. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-06-01thunderbolt: Move nfc_credits field to struct tb_path_hopMika Westerberg3-15/+19
With the USB4 buffer allocation the number of credits (and non-flow credits) may be different depending on the router buffer allocation preferences. To allow this move the nfc_credits field to struct tb_path_hop. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-06-01thunderbolt: Make tb_port_type() take const parameterMika Westerberg1-1/+1
The function does not modify the object in any way so make the parameter const to reflect this. No functional changes intended. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-05-31thunderbolt: Align USB4 router wakes configuration with the CM guideMika Westerberg1-5/+11
The USB4 Configuration Manager guide suggests that the USB4 port wakes are configured in a certain way, like that when the port is configured the wake-on-connect should not be set and so forth, so align the driver with this. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-05-31thunderbolt: Add wake from DisplayPortMika Westerberg5-5/+14
Latest USB4 spec added a new wake bit for DisplayPort so add this to the driver when runtime suspending. This way wake up the domain when a new monitor is plugged in to any of the device routers. Also do the same for pre-USB4 devices through the link controller registers as documented in chapter 13 of the USB4 spec. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-05-31thunderbolt: Use generic tb_nvm_[read|write]_data() for Thunderbolt 2/3 devicesMika Westerberg1-79/+15
Now that we have generic functionality available in nvm.c make the DMA port code call it instead of duplicating the functionality. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-05-31thunderbolt: Split NVM read/write generic functions out from usb4.cMika Westerberg3-92/+124
We do this for Thunderbolt 2/3 devices through DMA port, USB4 devices and retimers pretty much the same way. Only the actual block read/write is different. For this reason split out the NVM read/write functions from usb4.c to nvm.c and make USB4 device code call these when needed. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-05-31thunderbolt: Add self-authenticate support for new dockCrag Wang1-0/+1
Add new device known to support self-authenticate on disconnect. Signed-off-by: Crag Wang <crag.wang@dell.com> Reviewed-by: Mario Limonciello <mario.limonciello@outlook.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-05-30Merge branch 'i2c/for-current' of ↵Linus Torvalds18-28/+111
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "This is a bit larger than usual at rc4 time. The reason is due to Lee's work of fixing newly reported build warnings. The rest is fixes as usual" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (22 commits) MAINTAINERS: adjust to removing i2c designware platform data i2c: s3c2410: fix possible NULL pointer deref on read message after write i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset i2c: i801: Don't generate an interrupt on bus reset i2c: mpc: implement erratum A-004447 workaround powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name i2c: busses: i2c-st: Fix copy/paste function misnaming issues i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure i2c: busses: i2c-ocores: Place the expected function names into the documentation headers i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()' i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode' i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-doc i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout' i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E i2c: I2C_HISI should depend on ACPI ...
2021-05-29Merge tag 'thermal-v5.13-rc4' of ↵Linus Torvalds4-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fixes from Daniel Lezcano: - Fix uninitialized error code value for the SPMI adc driver (Yang Yingliang) - Fix kernel doc warning (Yang Li) - Fix wrong read-write thermal trip point initialization (Srinivas Pandruvada) * tag 'thermal-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/drivers/qcom: Fix error code in adc_tm5_get_dt_channel_data() thermal/ti-soc-thermal: Fix kernel-doc thermal/drivers/intel: Initialize RW trip to THERMAL_TEMP_INVALID
2021-05-29Merge tag 'char-misc-5.13-rc4' of ↵Linus Torvalds5-5/+19
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some tiny char/misc driver fixes for 5.13-rc4. Nothing huge here, just some tiny fixes for reported issues: - two interconnect driver fixes - kgdb build warning fix for gcc-11 - hgafb regression fix - soundwire driver fix - mei driver fix All have been in linux-next with no reported issues" * tag 'char-misc-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: request autosuspend after sending rx flow control kgdb: fix gcc-11 warnings harder video: hgafb: correctly handle card detect failure during probe soundwire: qcom: fix handling of qcom,ports-block-pack-mode interconnect: qcom: Add missing MODULE_DEVICE_TABLE interconnect: qcom: bcm-voter: add a missing of_node_put()
2021-05-29Merge tag 'driver-core-5.13-rc4' of ↵Linus Torvalds1-32/+36
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are three small driver core / debugfs fixes for 5.13-rc4: - debugfs fix for incorrect "lockdown" mode for selinux accesses - two device link changes, one bugfix and one cleanup All of these have been in linux-next for over a week with no reported problems" * tag 'driver-core-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers: base: Reduce device link removal code duplication drivers: base: Fix device link removal debugfs: fix security_locked_down() call for SELinux
2021-05-29Merge tag 'staging-5.13-rc4' of ↵Linus Torvalds9-36/+55
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here are some small IIO and staging driver fixes for reported issues for 5.13-rc4. Nothing major here, tiny changes for reported problems, full details are in the shortlog if people are curious. All have been in linux-next for a while with no reported problems" * tag 'staging-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: adc: ad7793: Add missing error code in ad7793_setup() iio: adc: ad7923: Fix undersized rx buffer. iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp() iio: dac: ad5770r: Put fwnode in error case during ->probe() iio: gyro: fxas21002c: balance runtime power in error path staging: emxx_udc: fix loop in _nbu2ss_nuke() staging: iio: cdc: ad7746: avoid overwrite of num_channels iio: adc: ad7192: handle regulator voltage error first iio: adc: ad7192: Avoid disabling a clock that was never enabled. iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers iio: adc: ad7124: Fix missbalanced regulator enable / disable on error.
2021-05-29Merge tag 'tty-5.13-rc4' of ↵Linus Torvalds10-68/+92
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver fixes from Greg KH: "Here are some small fixes for reported problems for tty and serial drivers for 5.13-rc4. They consist of: - 8250 bugfixes and new device support - lockdown security mode fixup - syzbot found problems fixed - 8250_omap fix for interrupt storm - revert of 8250_omap driver fix as it caused worse problem than the original issue All but the last patch have been in linux-next for a while, the last one is a revert of a problem found in linux-next with the 8250_omap driver change" * tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: 8250: 8250_omap: Fix possible interrupt storm" serial: 8250_pci: handle FL_NOIRQ board flag serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait' serial: 8250_pci: Add support for new HPE serial device serial: 8250: 8250_omap: Fix possible interrupt storm serial: 8250: Use BIT(x) for UART_{CAP,BUG}_* serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART serial: 8250_dw: Add device HID for new AMD UART controller serial: sh-sci: Fix off-by-one error in FIFO threshold register setting serial: core: fix suspicious security_locked_down() call serial: tegra: Fix a mask operation that is always true
2021-05-29Merge tag 'usb-5.13-rc4' of ↵Linus Torvalds20-44/+110
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt fixes from Greg KH: "Here are a number of tiny USB and Thunderbolt driver fixes for 5.13-rc4. They consist of: - thunderbolt fixes for some NVM bound issues - xhci fixes for reported problems - control-request fixups - documentation build warning fixes - new usb-serial driver device ids - typec bugfixes for reported issues - usbfs warning fixups (could be triggered from userspace) - other tiny fixes for reported problems. All of these have been in linux-next with no reported issues" * tag 'usb-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) xhci: Fix 5.12 regression of missing xHC cache clearing command after a Stall xhci: fix giving back URB with incorrect status regression in 5.12 usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen() usb: typec: tcpm: Respond Not_Supported if no snk_vdo usb: typec: tcpm: Properly interrupt VDM AMS USB: trancevibrator: fix control-request direction usb: Restore the usb_header label usb: typec: tcpm: Use LE to CPU conversion when accessing msg->header usb: typec: ucsi: Clear pending after acking connector change usb: typec: mux: Fix matching with typec_altmode_desc misc/uss720: fix memory leak in uss720_probe usb: dwc3: gadget: Properly track pending and queued SG USB: usbfs: Don't WARN about excessively large memory allocations thunderbolt: usb4: Fix NVM read buffer bounds and offset issue thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue usb: chipidea: udc: assign interrupt number to USB gadget structure usb: cdnsp: Fix lack of removing request from pending list. usb: cdns3: Fix runtime PM imbalance on error USB: serial: pl2303: add device id for ADLINK ND-6530 GC USB: serial: ti_usb_3410_5052: add startech.com device id ...
2021-05-29Merge tag 's390-5.13-3' of ↵Linus Torvalds4-4/+15
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: "Fix races in vfio-ccw request handling" * tag 's390-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: vfio-ccw: Serialize FSM IDLE state with I/O completion vfio-ccw: Reset FSM state to IDLE inside FSM vfio-ccw: Check initialized flag in cp_init()
2021-05-29Merge tag 'scsi-fixes' of ↵Linus Torvalds11-17/+38
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Ten small fixes, all in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq scsi: vmw_pvscsi: Set correct residual data length scsi: bnx2fc: Return failure if io_req is already in ABTS processing scsi: aic7xxx: Remove multiple definition of globals scsi: aic7xxx: Restore several defines for aic7xxx firmware build scsi: target: iblock: Fix smp_processor_id() BUG messages scsi: libsas: Use _safe() loop in sas_resume_port() scsi: target: tcmu: Fix xarray RCU warning scsi: target: core: Avoid smp_processor_id() in preemptible code
2021-05-29Merge tag 'block-5.13-2021-05-28' of git://git.kernel.dk/linux-blockLinus Torvalds11-21/+54
Pull block fixes from Jens Axboe: - NVMe pull request (Christoph): - fix a memory leak in nvme_cdev_add (Guoqing Jiang) - fix inline data size comparison in nvmet_tcp_queue_response (Hou Pu) - fix false keep-alive timeout when a controller is torn down (Sagi Grimberg) - fix a nvme-tcp Kconfig dependency (Sagi Grimberg) - short-circuit reconnect retries for FC (Hannes Reinecke) - decode host pathing error for connect (Hannes Reinecke) - MD pull request (Song): - Fix incorrect chunk boundary assert (Christoph) - Fix s390/dasd verification panic (Stefan) * tag 'block-5.13-2021-05-28' of git://git.kernel.dk/linux-block: nvmet: fix false keep-alive timeout when a controller is torn down nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME md/raid5: remove an incorrect assert in in_chunk_boundary s390/dasd: add missing discipline function nvme-fabrics: decode host pathing error for connect nvme-fc: short-circuit reconnect retries nvme: fix potential memory leaks in nvme_cdev_add
2021-05-29Merge tag 'drm-fixes-2021-05-29' of git://anongit.freedesktop.org/drm/drmLinus Torvalds13-57/+81
Pull drm fixes from Dave Airlie: "Pretty quiet this week, couple of amdgpu, one i915, and a few misc otherwise. ttm: - prevent irrelevant swapout amdgpu: - MultiGPU fan fix - VCN powergating fixes amdkfd: - Fix SDMA register offset error meson: - fix shutdown crash i915: - Re-enable LTTPR non-transparent LT mode for DPCD_REV < 1.4" * tag 'drm-fixes-2021-05-29' of git://anongit.freedesktop.org/drm/drm: drm/ttm: Skip swapout if ttm object is not populated drm/i915: Reenable LTTPR non-transparent LT mode for DPCD_REV<1.4 drm/meson: fix shutdown crash when component not probed drm/amdgpu/jpeg3: add cancel_delayed_work_sync before power gate drm/amdgpu/jpeg2.5: add cancel_delayed_work_sync before power gate drm/amdgpu/jpeg2.0: add cancel_delayed_work_sync before power gate drm/amdgpu/vcn3: add cancel_delayed_work_sync before power gate drm/amdgpu/vcn2.5: add cancel_delayed_work_sync before power gate drm/amdgpu/vcn2.0: add cancel_delayed_work_sync before power gate drm/amdgpu/vcn1: add cancel_delayed_work_sync before power gate drm/amdkfd: correct sienna_cichlid SDMA RLC register offset error drm/amd/pm: correct MGpuFanBoost setting
2021-05-28Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"Greg Kroah-Hartman1-12/+0
This reverts commit 31fae7c8b18c3f8029a2a5dce97a3182c1a167a0. Tony writes: I just noticed this causes the following regression in Linux next when pressing a key on uart console after boot at least on omap3. This seems to happen on serial_port_in(port, UART_RX) in the quirk handling. So let's drop this. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/YLCCJzkkB4N7LTQS@atomide.com Fixes: 31fae7c8b18c ("serial: 8250: 8250_omap: Fix possible interrupt storm") Reported-by: Tony Lindgren <tony@atomide.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-28i2c: s3c2410: fix possible NULL pointer deref on read message after writeKrzysztof Kozlowski1-0/+3
Interrupt handler processes multiple message write requests one after another, till the driver message queue is drained. However if driver encounters a read message without preceding START, it stops the I2C transfer as it is an invalid condition for the controller. At least the comment describes a requirement "the controller forces us to send a new START when we change direction". This stop results in clearing the message queue (i2c->msg = NULL). The code however immediately jumped back to label "retry_write" which dereferenced the "i2c->msg" making it a possible NULL pointer dereference. The Coverity analysis: 1. Condition !is_msgend(i2c), taking false branch. if (!is_msgend(i2c)) { 2. Condition !is_lastmsg(i2c), taking true branch. } else if (!is_lastmsg(i2c)) { 3. Condition i2c->msg->flags & 1, taking true branch. if (i2c->msg->flags & I2C_M_RD) { 4. write_zero_model: Passing i2c to s3c24xx_i2c_stop, which sets i2c->msg to NULL. s3c24xx_i2c_stop(i2c, -EINVAL); 5. Jumping to label retry_write. goto retry_write; 6. var_deref_model: Passing i2c to is_msgend, which dereferences null i2c->msg. if (!is_msgend(i2c)) {" All previous calls to s3c24xx_i2c_stop() in this interrupt service routine are followed by jumping to end of function (acknowledging the interrupt and returning). This seems a reasonable choice also here since message buffer was entirely emptied. Addresses-Coverity: Explicit null dereferenced Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-28i2c: mediatek: Disable i2c start_en and clear intr_stat brfore resetQii Wang1-0/+5
The i2c controller driver do dma reset after transfer timeout, but sometimes dma reset will trigger an unexpected DMA_ERR irq. It will cause the i2c controller to continuously send interrupts to the system and cause soft lock-up. So we need to disable i2c start_en and clear intr_stat to stop i2c controller before dma reset when transfer timeout. Fixes: aafced673c06("i2c: mediatek: move dma reset before i2c reset") Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-28Merge tag 'drm-intel-fixes-2021-05-27' of ↵Dave Airlie1-38/+33
ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes drm/i915 fixes for v5.13-rc4: - Re-enable LTTPR non-transparent LT mode for DPCD_REV<1.4 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/875yz4bnmj.fsf@intel.com
2021-05-28Merge tag 'drm-misc-fixes-2021-05-27' of ↵Dave Airlie2-5/+6
ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes A fix in meson for a crash at shutdown and one for TTM to prevent irrelevant swapout Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210527120828.3w7f53krzkslc4ii@gilmour
2021-05-28Merge tag 'amd-drm-fixes-5.13-2021-05-26' of ↵Dave Airlie10-14/+42
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.13-2021-05-26: amdgpu: - MultiGPU fan fix - VCN powergating fixes amdkfd: - Fix SDMA register offset error Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210527031831.4057-1-alexander.deucher@amd.com
2021-05-28Merge tag 'for-5.13/dm-fixes-2' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM verity target's 'require_signatures' module_param permissions. - Revert DM snapshot fix from v5.13-rc3 and then properly fix crash when an origin has no snapshots. This allows only the proper fix to go to stable@ (since the original fix was successfully dropped). * tag 'for-5.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm snapshot: properly fix a crash when an origin has no snapshots dm snapshot: revert "fix a crash when an origin has no snapshots" dm verity: fix require_signatures module_param permissions
2021-05-27i2c: i801: Don't generate an interrupt on bus resetJean Delvare1-4/+2
Now that the i2c-i801 driver supports interrupts, setting the KILL bit in a attempt to recover from a timed out transaction triggers an interrupt. Unfortunately, the interrupt handler (i801_isr) is not prepared for this situation and will try to process the interrupt as if it was signaling the end of a successful transaction. In the case of a block transaction, this can result in an out-of-range memory access. This condition was reproduced several times by syzbot: https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79 So disable interrupts while trying to reset the bus. Interrupts will be enabled again for the following transaction. Fixes: 636752bcb517 ("i2c-i801: Enable IRQ for SMBus transactions") Reported-by: syzbot+b4d3fd1dfd53e90afd79@syzkaller.appspotmail.com Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: mpc: implement erratum A-004447 workaroundChris Packham1-2/+79
The P2040/P2041 has an erratum where the normal i2c recovery mechanism does not work. Implement the alternative recovery mechanism documented in the P2040 Chip Errata Rev Q. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function nameLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-stm32f4.c:321: warning: expecting prototype for stm32f4_i2c_write_ byte()(). Prototype was for stm32f4_i2c_write_byte() instead Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-st: Fix copy/paste function misnaming issuesLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-st.c:531: warning: expecting prototype for st_i2c_handle_write(). Prototype was for st_i2c_handle_read() instead drivers/i2c/busses/i2c-st.c:566: warning: expecting prototype for st_i2c_isr(). Prototype was for st_i2c_isr_thread() instead Fix the "enmpty" typo while here. Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structureLee Jones1-4/+4
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-pnx.c:147: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_start' drivers/i2c/busses/i2c-pnx.c:147: warning: Excess function parameter 'adap' description in 'i2c_pnx_start' drivers/i2c/busses/i2c-pnx.c:202: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_stop' drivers/i2c/busses/i2c-pnx.c:202: warning: Excess function parameter 'adap' description in 'i2c_pnx_stop' drivers/i2c/busses/i2c-pnx.c:231: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_xmit' drivers/i2c/busses/i2c-pnx.c:231: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_xmit' drivers/i2c/busses/i2c-pnx.c:301: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_rcv' drivers/i2c/busses/i2c-pnx.c:301: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_rcv' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-ocores: Place the expected function names into the ↵Lee Jones1-4/+4
documentation headers Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-ocores.c:253: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/i2c/busses/i2c-ocores.c:267: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/i2c/busses/i2c-ocores.c:299: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/i2c/busses/i2c-ocores.c:347: warning: expecting prototype for It handles an IRQ(). Prototype was for ocores_process_polling() instead Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for ↵Lee Jones1-1/+2
'msgs' param Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-eg20t.c:151: warning: bad line: PCH i2c controller drivers/i2c/busses/i2c-eg20t.c:369: warning: Function parameter or member 'msgs' not described in 'pch_i2c_writebytes' Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-designware-master.c:176: warning: expecting prototype for i2c_dw_init(). Prototype was for i2c_dw_init_master() instead Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-cadence.c:157: warning: expecting prototype for enum cdns_i2c_slave_mode. Prototype was for enum cdns_i2c_slave_state instead Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-ali1563.c:24: warning: expecting prototype for i2c(). Prototype was for ALI1563_MAX_TIMEOUT() instead Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headersLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_select' drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_select' drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_deselect' drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_deselect' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Douglas Anderson <dianders@chromium.org> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-nomadik.c:184: warning: Function parameter or member 'timeout' not described in 'nmk_i2c_dev' Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27Merge tag 'acpi-5.13-rc4' of ↵Linus Torvalds4-17/+50
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a recent ACPI power management regression causing boot issues to occur on some systems due to attempts to turn off ACPI power resources that are already off (which should work according to the ACPI specification)" * tag 'acpi-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: power: Refine turning off unused power resources
2021-05-27Merge tag 'iommu-fixes-v5.13-rc3' of ↵Linus Torvalds5-5/+16
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Important fix for the AMD IOMMU driver in the recently added page-specific invalidation code to fix a calculation. - Fix a NULL-ptr dereference in the AMD IOMMU driver when a device switches domain types. - Fixes for the Intel VT-d driver to check for allocation failure and do correct cleanup. - Another fix for Intel VT-d to not allow supervisor page requests from devices when using second level page translation. - Add a MODULE_DEVICE_TABLE to the VIRTIO IOMMU driver * tag 'iommu-fixes-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix sysfs leak in alloc_iommu() iommu/vt-d: Use user privilege for RID2PASID translation iommu/vt-d: Check for allocation failure in aux_detach_device() iommu/virtio: Add missing MODULE_DEVICE_TABLE iommu/amd: Fix wrong parentheses on page-specific invalidations iommu/amd: Clear DMA ops when switching domain
2021-05-27iommu/vt-d: Fix sysfs leak in alloc_iommu()Rolf Eike Beer1-1/+3
iommu_device_sysfs_add() is called before, so is has to be cleaned on subsequent errors. Fixes: 39ab9555c2411 ("iommu: Add sysfs bindings for struct iommu_device") Cc: stable@vger.kernel.org # 4.11.x Signed-off-by: Rolf Eike Beer <eb@emlix.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/17411490.HIIP88n32C@mobilepool36.emlix.com Link: https://lore.kernel.org/r/20210525070802.361755-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-05-27Merge tag 'nvme-5.13-2021-05-27' of git://git.infradead.org/nvme into block-5.13Jens Axboe7-16/+40
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.13 - fix a memory leak in nvme_cdev_add (Guoqing Jiang) - fix inline data size comparison in nvmet_tcp_queue_response (Hou Pu) - fix false keep-alive timeout when a controller is torn down (Sagi Grimberg) - fix a nvme-tcp Kconfig dependency (Sagi Grimberg) - short-circuit reconnect retries for FC (Hannes Reinecke) - decode host pathing error for connect (Hannes Reinecke)" * tag 'nvme-5.13-2021-05-27' of git://git.infradead.org/nvme: nvmet: fix false keep-alive timeout when a controller is torn down nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME nvme-fabrics: decode host pathing error for connect nvme-fc: short-circuit reconnect retries nvme: fix potential memory leaks in nvme_cdev_add
2021-05-27serial: 8250_pci: handle FL_NOIRQ board flagChristian Gmeiner1-12/+17
In commit 8428413b1d14 ("serial: 8250_pci: Implement MSI(-X) support") the way the irq gets allocated was changed. With that change the handling FL_NOIRQ got lost. Restore the old behaviour. Fixes: 8428413b1d14 ("serial: 8250_pci: Implement MSI(-X) support") Cc: <stable@vger.kernel.org> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Link: https://lore.kernel.org/r/20210527095529.26281-1-christian.gmeiner@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27mei: request autosuspend after sending rx flow controlAlexander Usyskin1-0/+3
A rx flow control waiting in the control queue may block autosuspend. Re-request autosuspend after flow control been sent to unblock the transition to the low power state. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20210526193334.445759-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27Merge tag 'icc-5.13-rc4' of ↵Greg Kroah-Hartman1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus Grorgi writes: interconnect fixes for v5.13 This contains two tiny driver fixes: - bcm-voter: Add missing MODULE_DEVICE_TABLE - bcm-voter: Add a missing of_node_put() Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: Add missing MODULE_DEVICE_TABLE interconnect: qcom: bcm-voter: add a missing of_node_put()
2021-05-27thermal/drivers/qcom: Fix error code in adc_tm5_get_dt_channel_data()Yang Yingliang1-1/+1
Return -EINVAL when args is invalid instead of 'ret' which is set to zero by a previous successful call to a function. Fixes: ca66dca5eda6 ("thermal: qcom: add support for adc-tm5 PMIC thermal monitor") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210527092640.2070555-1-yangyingliang@huawei.com
2021-05-27Merge tag 'net-5.13-rc4' of ↵Linus Torvalds82-406/+1176
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc4, including fixes from bpf, netfilter, can and wireless trees. Notably including fixes for the recently announced "FragAttacks" WiFi vulnerabilities. Rather large batch, touching some core parts of the stack, too, but nothing hair-raising. Current release - regressions: - tipc: make node link identity publish thread safe - dsa: felix: re-enable TAS guard band mode - stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid() - stmmac: fix system hang if change mac address after interface ifdown Current release - new code bugs: - mptcp: avoid OOB access in setsockopt() - bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers - ethtool: stats: fix a copy-paste error - init correct array size Previous releases - regressions: - sched: fix packet stuck problem for lockless qdisc - net: really orphan skbs tied to closing sk - mlx4: fix EEPROM dump support - bpf: fix alu32 const subreg bound tracking on bitwise operations - bpf: fix mask direction swap upon off reg sign change - bpf, offload: reorder offload callback 'prepare' in verifier - stmmac: Fix MAC WoL not working if PHY does not support WoL - packetmmap: fix only tx timestamp on request - tipc: skb_linearize the head skb when reassembling msgs Previous releases - always broken: - mac80211: address recent "FragAttacks" vulnerabilities - mac80211: do not accept/forward invalid EAPOL frames - mptcp: avoid potential error message floods - bpf, ringbuf: deny reserve of buffers larger than ringbuf to prevent out of buffer writes - bpf: forbid trampoline attach for functions with variable arguments - bpf: add deny list of functions to prevent inf recursion of tracing programs - tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT - can: isotp: prevent race between isotp_bind() and isotp_setsockopt() - netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version Misc: - bpf: add kconfig knob for disabling unpriv bpf by default" * tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits) net: phy: Document phydev::dev_flags bits allocation mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer mptcp: avoid error message on infinite mapping mptcp: drop unconditional pr_warn on bad opt mptcp: avoid OOB access in setsockopt() nfp: update maintainer and mailing list addresses net: mvpp2: add buffer header handling in RX bnx2x: Fix missing error code in bnx2x_iov_init_one() net: zero-initialize tc skb extension on allocation net: hns: Fix kernel-doc sctp: fix the proc_handler for sysctl encap_port sctp: add the missing setting for asoc encap_port bpf, selftests: Adjust few selftest result_unpriv outcomes bpf: No need to simulate speculative domain for immediates bpf: Fix mask direction swap upon off reg sign change bpf: Wrap aux data inside bpf_sanitize_info container bpf: Fix BPF_LSM kconfig symbol dependency selftests/bpf: Add test for l3 use of bpf_redirect_peer bpftool: Add sock_release help info for cgroup attach/prog load command net: dsa: microchip: enable phy errata workaround on 9567 ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 11:42:15 +0300