| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- a new watchdog driver for the Mellanox systems
- renesas-wdt: Document r8a77470 support
- numerous 'Mark expected switch fall-throughs'
- qcom: Add suspend/resume support
- some small fixes and documentation updates
* tag 'linux-watchdog-5.1-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: w83877f_wdt: Mark expected switch fall-through
watchdog: sc520_wdt: Mark expected switch fall-through
watchdog: sbc60xxwdt: Mark expected switch fall-through
watchdog: smsc37b787_wdt: Mark expected switch fall-through
watchdog: sc1200: Mark expected switch fall-through
watchdog: pc87413: Mark expected switch fall-through
Documentation/watchdog: Add documentation mlx-wdt driver
watchdog: mlx-wdt: introduce a watchdog driver for Mellanox systems.
platform_data/mlxreg: additions for Mellanox watchdog driver.
watchdog: Update sysfs documentation.
watchdog: dw: remove useless pr_fmt
watchdog: pika_wdt: drop pointless static qualifier in pikawdt_init
watchdog/hpwdt: Update Kconfig documentation
dt-bindings: watchdog: renesas-wdt: Document r8a77470 support
watchdog: qcom: Add suspend/resume support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is a calm cycle, not much happened this time around: not even
much incremental development. Some three new drivers, that is all.
No core changes.
New drivers:
- NXP (ex Freescale) i.MX 8QM driver.
- NXP (ex Freescale) i.MX 8MM driver.
- AT91 SAM9X60 subdriver.
Improvements:
- Support for external interrups (EINT) on Mediatek virtual GPIOs.
- Make BCM2835 pin config fully generic.
- Lots of Renesas SH-PFC incremental improvements"
* tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (70 commits)
pinctrl: imx: fix scu link errors
dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding
pinctrl: qcom: spmi-gpio: Reorder debug print
pinctrl: nomadik: fix possible object reference leak
pinctrl: stm32: return error upon hwspinlock failure
pinctrl: stm32: fix memory leak issue
pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions
pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions
pinctrl: sh-pfc: Validate fixed-size field widths at build time
pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups
pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group
pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group
pinctrl: sh-pfc: emev2: Add missing pinmux functions
pinctrl: sunxi: Support I/O bias voltage setting on A80
pinctrl: ingenic: Add LCD pins for the JZ4725B SoC
pinctrl: samsung: Remove legacy API for handling external wakeup interrupts mask
pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl
pinctrl: bcm2835: declare pin config as generic
pinctrl: qcom: qcs404: Drop unused UFS_RESET macro
dt-bindings: add documentation for slew rate
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- update the ili210x touchscreen driver, refreshing the code and adding
support for ILI251X line
- add support for st1633 to the st1232 touchscreen driver
- add support for sx8650 to the the sx8654 touchscreen driver
- add support for Evervision FT5726 to the edt-ft5x06 touchscreen
driver
- add support for gt5688 to the Goodix touchscreen driver
- new vibrator driver for MSM SOCs
- miscellaneous fixes for the rest of input drivers
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits)
Input: wacom_serial4 - add support for Wacom ArtPad II tablet
Input: elan_i2c - add id for touchpad found in Lenovo s21e-20
Input: raspberrypi-ts - select CONFIG_INPUT_POLLDEV
Input: msm-vibrator - use correct gpio header
Input: ti_am335x_tsc - remove set but not used variable 'tscadc_dev'
Input: i8042 - rework DT node name comparisons
Input: goodix - print values in case of inconsistencies
Input: goodix - refer to touchscreen.txt in device tree bindings
Input: goodix - support Goodix gt5688
Input: synaptics_i2c - remove redundant spinlock
Input: db9 - mark expected switch fall-through
Input: qt2160 - remove redundant spinlock
Input: st1232 - handle common DT bindings
Input: ims-pcu - switch to using brightness_set_blocking()
Input: st1232 - switch to gpiod API
Input: ili210x - fetch touchscreen geometry from DT
Input: msm-vibrator - tweak an error message
Input: tm2-touchkey - acknowledge that setting brightness is a blocking call
Input: stmfts - acknowledge that setting brightness is a blocking call
Input: ili210x - switch to using devm_device_add_group()
...
|
|
Pull IDE updates from David Miller:
"Nothing super exciting as usual:
1) Switch fallthrus from Gustavo A. R. Silva
2) Kconfig formatting cleanup from Enrico Weigelt
3) OF interface adjustment from Rob Herring"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
drivers: ide: Kconfig: pedantic formatting
ide: mark expected switch fall-through
ide: hpt366: mark expected switch fall-throughs
ide: Use of_node_name_eq for node name comparisons
|
|
Pull networking fixes from David Miller:
"First batch of fixes in the new merge window:
1) Double dst_cache free in act_tunnel_key, from Wenxu.
2) Avoid NULL deref in IN_DEV_MFORWARD() by failing early in the
ip_route_input_rcu() path, from Paolo Abeni.
3) Fix appletalk compile regression, from Arnd Bergmann.
4) If SLAB objects reach the TCP sendpage method we are in serious
trouble, so put a debugging check there. From Vasily Averin.
5) Memory leak in hsr layer, from Mao Wenan.
6) Only test GSO type on GSO packets, from Willem de Bruijn.
7) Fix crash in xsk_diag_put_umem(), from Eric Dumazet.
8) Fix VNIC mailbox length in nfp, from Dirk van der Merwe.
9) Fix race in ipv4 route exception handling, from Xin Long.
10) Missing DMA memory barrier in hns3 driver, from Jian Shen.
11) Use after free in __tcf_chain_put(), from Vlad Buslov.
12) Handle inet_csk_reqsk_queue_add() failures, from Guillaume Nault.
13) Return value correction when ip_mc_may_pull() fails, from Eric
Dumazet.
14) Use after free in x25_device_event(), also from Eric"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits)
gro_cells: make sure device is up in gro_cells_receive()
vxlan: test dev->flags & IFF_UP before calling gro_cells_receive()
net/x25: fix use-after-free in x25_device_event()
isdn: mISDNinfineon: fix potential NULL pointer dereference
net: hns3: fix to stop multiple HNS reset due to the AER changes
ip: fix ip_mc_may_pull() return value
net: keep refcount warning in reqsk_free()
net: stmmac: Avoid one more sometimes uninitialized Clang warning
net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports
rxrpc: Fix client call queueing, waiting for channel
tcp: handle inet_csk_reqsk_queue_add() failures
net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entry
8139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NIC
fou, fou6: avoid uninit-value in gue_err() and gue6_err()
net: sched: fix potential use-after-free in __tcf_chain_put()
vhost: silence an unused-variable warning
vsock/virtio: fix kernel panic from virtio_transport_reset_no_sock
connector: fix unsafe usage of ->real_parent
vxlan: do not need BH again in vxlan_cleanup()
net: hns3: add dma_rmb() for rx description
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull tpm updates from James Morris:
- Clean up the transmission flow
Cleaned up the whole transmission flow. Locking of the chip is now
done in the level of tpm_try_get_ops() and tpm_put_ops() instead
taking the chip lock inside tpm_transmit(). The nested calls inside
tpm_transmit(), used with the resource manager, have been refactored
out.
Should make easier to perform more complex transactions with the TPM
without making the subsystem a bigger mess (e.g. encrypted channel
patches by James Bottomley).
- PPI 1.3 support
TPM PPI 1.3 introduces an additional optional command parameter that
may be needed for some commands. Display the parameter if the command
requires such a parameter. Only command 23 (SetPCRBanks) needs one.
The PPI request file will show output like this then:
# echo "23 16" > request
# cat request
23 16
# echo "5" > request
# cat request
5
- Extend all PCR banks in IMA
Instead of static PCR banks array, the array of available PCR banks
is now allocated dynamically. The digests sizes are determined
dynamically using a probe PCR read without relying crypto's static
list of hash algorithms.
This should finally make sealing of measurements in IMA safe and
secure.
- TPM 2.0 selftests
Added a test suite to tools/testing/selftests/tpm2 previously outside
of the kernel tree: https://github.com/jsakkine-intel/tpm2-scripts
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (37 commits)
tpm/ppi: Enable submission of optional command parameter for PPI 1.3
tpm/ppi: Possibly show command parameter if TPM PPI 1.3 is used
tpm/ppi: Display up to 101 operations as define for version 1.3
tpm/ppi: rename TPM_PPI_REVISION_ID to TPM_PPI_REVISION_ID_1
tpm/ppi: pass function revision ID to tpm_eval_dsm()
tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()
KEYS: trusted: explicitly use tpm_chip structure from tpm_default_chip()
tpm: move tpm_chip definition to include/linux/tpm.h
tpm: retrieve digest size of unknown algorithms with PCR read
tpm: rename and export tpm2_digest and tpm2_algorithms
tpm: dynamically allocate the allocated_banks array
tpm: remove @flags from tpm_transmit()
tpm: take TPM chip power gating out of tpm_transmit()
tpm: introduce tpm_chip_start() and tpm_chip_stop()
tpm: remove TPM_TRANSMIT_UNLOCKED flag
tpm: use tpm_try_get_ops() in tpm-sysfs.c.
tpm: remove @space from tpm_transmit()
tpm: move TPM space code out of tpm_transmit()
tpm: move tpm_validate_commmand() to tpm2-space.c
tpm: clean up tpm_try_transmit() error handling flow
...
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
- use MODULE_DEVICE_TABLE across several wmi drivers, keeping
wmi_device_id and MODULE_ALIAS() declarations in sync
- add several Ideapad models to the no_hw_rfkill list
- add support for new Mellanox platforms, including new fan and LED
functionality
- address Dell keyboard backlight change event and power button release
issues
- update dell_rbu to use appropriate memory allocation mechanisms
- several small fixes and Ice Lake support for intel_pmc_core
- fix a suspend regression for Cherry Trail based devices in
intel_int0002_vgpio
- a few other routine fixes
* tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86: (50 commits)
MAINTAINERS: Include mlxreg.h in Mellanox Platform Driver files
platform/x86: ideapad-laptop: Add S130-14IGM to no_hw_rfkill list
platform/x86: mlx-platform: Fix access mode for fan_dir attribute
platform/x86: mlx-platform: Add UID LED for the next generation systems
platform/x86: mlx-platform: Add extra CPLD for next generation systems
platform/x86: wmi-bmof: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: intel-wmi-thunderbolt: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: huawei-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: dell-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: dell-wmi-descriptor: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: dell-smbios-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE()
platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h
modpost: file2alias: define size of alias
platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet
platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill list
platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_list
platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown
platform/x86: intel_pmc_core: Add Package cstates residency info
platform/x86: intel_pmc_core: Add ICL platform support
...
|
|
Pull virtio updates from Michael Tsirkin:
"Several fixes, most notably fix for virtio on swiotlb systems"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: silence an unused-variable warning
virtio: hint if callbacks surprisingly might sleep
virtio-ccw: wire up ->bus_name callback
s390/virtio: handle find on invalid queue gracefully
virtio-ccw: diag 500 may return a negative cookie
virtio_balloon: remove the unnecessary 0-initialization
virtio-balloon: improve update_balloon_size_func
virtio-blk: Consider virtio_max_dma_size() for maximum segment size
virtio: Introduce virtio_max_dma_size()
dma: Introduce dma_max_mapping_size()
swiotlb: Add is_swiotlb_active() function
swiotlb: Introduce swiotlb_max_mapping_size()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- A big cleanup and optimization patch-set for the Tegra GART driver
- Documentation updates and fixes for the IOMMU-API
- Support for page request in Intel VT-d scalable mode
- Intel VT-d dma_[un]map_resource() support
- Updates to the ATS enabling code for PCI (acked by Bjorn) and Intel
VT-d to align with the latest version of the ATS spec
- Relaxed IRQ source checking in the Intel VT-d driver for some aliased
devices, needed for future devices which send IRQ messages from more
than on request-ID
- IRQ remapping driver for Hyper-V
- Patches to make generic IOVA and IO-Page-Table code usable outside of
the IOMMU code
- Various other small fixes and cleanups
* tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits)
iommu/vt-d: Get domain ID before clear pasid entry
iommu/vt-d: Fix NULL pointer reference in intel_svm_bind_mm()
iommu/vt-d: Set context field after value initialized
iommu/vt-d: Disable ATS support on untrusted devices
iommu/mediatek: Fix semicolon code style issue
MAINTAINERS: Add Hyper-V IOMMU driver into Hyper-V CORE AND DRIVERS scope
iommu/hyper-v: Add Hyper-V stub IOMMU driver
x86/Hyper-V: Set x2apic destination mode to physical when x2apic is available
PCI/ATS: Add inline to pci_prg_resp_pasid_required()
iommu/vt-d: Check identity map for hot-added devices
iommu: Fix IOMMU debugfs fallout
iommu: Document iommu_ops.is_attach_deferred()
iommu: Document iommu_ops.iotlb_sync_map()
iommu/vt-d: Enable ATS only if the device uses page aligned address.
PCI/ATS: Add pci_ats_page_aligned() interface
iommu/vt-d: Fix PRI/PASID dependency issue.
PCI/ATS: Add pci_prg_resp_pasid_required() interface.
iommu/vt-d: Allow interrupts from the entire bus for aliased devices
iommu/vt-d: Add helper to set an IRTE to verify only the bus number
iommu: Fix flush_tlb_all typo
...
|
|
Pull DMA mapping updates from Christoph Hellwig:
- add debugfs support for dumping dma-debug information (Corentin
Labbe)
- Kconfig cleanups (Andy Shevchenko and me)
- debugfs cleanups (Greg Kroah-Hartman)
- improve dma_map_resource and use it in the media code
- arch_setup_dma_ops / arch_teardown_dma_ops cleanups
- various small cleanups and improvements for the per-device coherent
allocator
- make the DMA mask an upper bound and don't fail "too large" dma mask
in the remaning two architectures - this will allow big driver
cleanups in the following merge windows
* tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits)
Documentation/DMA-API-HOWTO: update dma_mask sections
sparc64/pci_sun4v: allow large DMA masks
sparc64/iommu: allow large DMA masks
sparc64: refactor the ali DMA quirk
ccio: allow large DMA masks
dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag
dma-mapping: remove dma_mark_declared_memory_occupied
dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig
dma-mapping: improve selection of dma_declare_coherent availability
dma-mapping: remove an incorrect __iommem annotation
of: select OF_RESERVED_MEM automatically
device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT
mfd/sm501: depend on HAS_DMA
dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability
dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability
dma-mapping: move debug configuration options to kernel/dma
dma-debug: add dumping facility via debugfs
dma: debug: no need to check return value of debugfs_create functions
videobuf2: replace a layering violation with dma_map_resource
dma-mapping: don't BUG when calling dma_map_resource on RAM
...
|
|
Formatting of Kconfig files doesn't look so pretty, so just
take a damp cloth and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warning:
drivers/ide/ide-floppy.c: In function ‘ide_floppy_get_capacity’:
drivers/ide/ide-floppy.c:424:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
^
drivers/ide/ide-floppy.c:431:3: note: here
case CAPACITY_CURRENT:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that, in this particular case, I removed the "else: "
part from the comment. As we are now using Warning level 3:
-Wimplicit-fallthrough=3, this is what GCC is expecting to
find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Same reasons than the ones explained in commit 4179cb5a4c92
("vxlan: test dev->flags & IFF_UP before calling netif_rx()")
netif_rx() or gro_cells_receive() must be called under a strict contract.
At device dismantle phase, core networking clears IFF_UP
and flush_all_backlogs() is called after rcu grace period
to make sure no incoming packet might be in a cpu backlog
and still referencing the device.
A similar protocol is used for gro_cells infrastructure, as
gro_cells_destroy() will be called only after a full rcu
grace period is observed after IFF_UP has been cleared.
Most drivers call netif_rx() from their interrupt handler,
and since the interrupts are disabled at device dismantle,
netif_rx() does not have to check dev->flags & IFF_UP
Virtual drivers do not have this guarantee, and must
therefore make the check themselves.
Otherwise we risk use-after-free and/or crashes.
Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
- Fix a unittest failure on UML. Preparation for converting to kunit
test framework.
- Add annotations to dtx_diff output
- Fix unittest reporting of expected error
- Move DMA configuration for virtual devices into the driver that needs
it (s5p-mfc)
- Vendor prefixes for feiyang and techstar
- Convert ARM GIC, GICv3, and L2x0 to DT schema
- Add r8a7778/9 HSCIF serial bindings
* tag 'devicetree-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: unittest: unflatten device tree on UML when testing
dt-bindings: Add vendor prefix for feiyang
dt-bindings: Add vendor prefix for techstar
dt-bindings: display: add missing semicolon in example
of: mark early_init_dt_alloc_reserved_memory_arch static
of: add dtc annotations functionality to dtx_diff
of: unittest: add caution to function header comment
of: unittest: remove report of expected error
dt-bindings: interrupt-controller: Convert ARM GICv3 to json-schema
dt-bindings: interrupt-controller: Convert ARM GIC to json-schema
dt-bindings: arm: l2x0: Convert L2 cache to json-schema
media: s5p-mfc: Fix memdev DMA configuration
dt-bindings: serial: sh-sci: Document r8a7778/9 HSCIF bindings
|
|
In case ioremap fails, the fix returns -ENOMEM to avoid NULL
pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Pseudo NMI support for arm64 using GICv3 interrupt priorities
- uaccess macros clean-up (unsafe user accessors also merged but
reverted, waiting for objtool support on arm64)
- ptrace regsets for Pointer Authentication (ARMv8.3) key management
- inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by
the riscv maintainers)
- arm64/perf updates: PMU bindings converted to json-schema, unused
variable and misleading comment removed
- arm64/debug fixes to ensure checking of the triggering exception
level and to avoid the propagation of the UNKNOWN FAR value into the
si_code for debug signals
- Workaround for Fujitsu A64FX erratum 010001
- lib/raid6 ARM NEON optimisations
- NR_CPUS now defaults to 256 on arm64
- Minor clean-ups (documentation/comments, Kconfig warning, unused
asm-offsets, clang warnings)
- MAINTAINERS update for list information to the ARM64 ACPI entry
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
arm64: mmu: drop paging_init comments
arm64: debug: Ensure debug handlers check triggering exception level
arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals
Revert "arm64: uaccess: Implement unsafe accessors"
arm64: avoid clang warning about self-assignment
arm64: Kconfig.platforms: fix warning unmet direct dependencies
lib/raid6: arm: optimize away a mask operation in NEON recovery routine
lib/raid6: use vdupq_n_u8 to avoid endianness warnings
arm64: io: Hook up __io_par() for inX() ordering
riscv: io: Update __io_[p]ar() macros to take an argument
asm-generic/io: Pass result of I/O accessor to __io_[p]ar()
arm64: Add workaround for Fujitsu A64FX erratum 010001
arm64: Rename get_thread_info()
arm64: Remove documentation about TIF_USEDFPU
arm64: irqflags: Fix clang build warnings
arm64: Enable the support of pseudo-NMIs
arm64: Skip irqflags tracing for NMI in IRQs disabled context
arm64: Skip preemption when exiting an NMI
arm64: Handle serror in NMI context
irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI
...
|
|
The commit bfcb79fca19d
("PCI/ERR: Run error recovery callbacks for all affected devices")
affected the non-fatal error recovery logic for the HNS and RDMA devices.
This is because each HNS PF under PCIe bus receive callbacks
from the AER driver when an error is reported for one of the PF.
This causes unwanted PF resets because
the HNS decides which PF to reset based on the reset type set.
The HNS error handling code sets the reset type based on the hw error
type detected.
This patch provides fix for the above issue for the recovery of
the hw errors in the HNS and RDMA devices.
This patch needs backporting to the kernel v5.0+
Fixes: 332fbf576579 ("net: hns3: add handling of hw ras errors using new set of commands")
Reported-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Update bio-based DM core to always call blk_queue_split() and update
DM targets to properly advertise discard limits that
blk_queue_split() looks at when dtermining to split discard. Whereby
allowing DM core's own 'split_discard_bios' to be removed.
- Improve DM cache target to provide support for discard passdown to
the origin device.
- Introduce support to directly boot to a DM mapped device from init by
using dm-mod.create= module param. This eliminates the need for an
elaborate initramfs that is otherwise needed to create DM devices.
This feature's implementation has been worked on for quite some time
(got up to v12) and is of particular interest to Android and other
more embedded platforms (e.g. ARM).
- Rate limit errors from the DM integrity target that were identified
as the cause for recent NMI hangs due to console limitations.
- Add sanity checks for user input to thin-pool and external snapshot
creation.
- Remove some unused leftover kmem caches from when old .request_fn
request-based support was removed.
- Various small cleanups and fixes to targets (e.g. typos, needless
unlikely() annotations, use struct_size(), remove needless
.direct_access method from dm-snapshot)
* tag 'for-5.1/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: limit the rate of error messages
dm snapshot: don't define direct_access if we don't support it
dm cache: add support for discard passdown to the origin device
dm writecache: fix typo in name for writeback_wq
dm: add support to directly boot to a mapped device
dm thin: add sanity checks to thin-pool and external snapshot creation
dm block manager: remove redundant unlikely annotation
dm verity fec: remove redundant unlikely annotation
dm integrity: remove redundant unlikely annotation
dm: always call blk_queue_split() in dm_process_bio()
dm: fix to_sector() for 32bit
dm switch: use struct_size() in kzalloc()
dm: remove unused _rq_tio_cache and _rq_cache
dm: eliminate 'split_discard_bios' flag from DM target interface
dm: update dm_process_bio() to split bio if in ->make_request_fn()
|
|
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
hisi_sas, target/iscsi and target/core.
Additionally Christoph refactored gdth as part of the dma changes. The
major mid-layer change this time is the removal of bidi commands and
with them the whole of the osd/exofs driver and filesystem. This is a
major simplification for block and mq in particular"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
scsi: cxgb4i: validate tcp sequence number only if chip version <= T5
scsi: cxgb4i: get pf number from lldi->pf
scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
scsi: mpt3sas: Add missing breaks in switch statements
scsi: aacraid: Fix missing break in switch statement
scsi: kill command serial number
scsi: csiostor: drop serial_number usage
scsi: mvumi: use request tag instead of serial_number
scsi: dpt_i2o: remove serial number usage
scsi: st: osst: Remove negative constant left-shifts
scsi: ufs-bsg: Allow reading descriptors
scsi: ufs: Allow reading descriptor via raw upiu
scsi: ufs-bsg: Change the calling convention for write descriptor
scsi: ufs: Remove unused device quirks
Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
scsi: megaraid_sas: Remove a bunch of set but not used variables
scsi: clean obsolete return values of eh_timed_out
scsi: sd: Optimal I/O size should be a multiple of physical block size
scsi: MAINTAINERS: SCSI initiator and target tweaks
scsi: fcoe: make use of fip_mode enum complete
...
|
|
Tablet initially begins communicating at 9600 baud, so this command
should be used to connect to the device:
$ inputattach --daemon --baud 9600 --wacom_iv /dev/ttyS0
https://github.com/linuxwacom/xf86-input-wacom/issues/40
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Lenovo s21e-20 uses ELAN0601 in its ACPI tables for the Elan touchpad.
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
When CONFIG_INPUT_POLLDEV is disabled, we get a link error:
drivers/input/touchscreen/raspberrypi-ts.o: In function `rpi_ts_probe':
raspberrypi-ts.c:(.text+0xec): undefined reference to `devm_input_allocate_polled_device'
raspberrypi-ts.c:(.text+0xec): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `devm_input_allocate_polled_device'
raspberrypi-ts.c:(.text+0x19c): undefined reference to `input_register_polled_device'
raspberrypi-ts.c:(.text+0x19c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `input_register_polled_device'
Select that symbol like we do from the other similar drivers.
Fixes: 0b9f28fed3f7 ("Input: add official Raspberry Pi's touchscreen driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
When CONFIG_GPIOLIB is not set, we get a couple of build
errors during test building:
drivers/input/misc/msm-vibrator.c: In function 'msm_vibrator_start':
drivers/input/misc/msm-vibrator.c:79:3: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration]
gpiod_set_value_cansleep(vibrator->enable_gpio, 1);
^~~~~~~~~~~~~~~~~~~~~~~~
gpio_set_value_cansleep
drivers/input/misc/msm-vibrator.c: In function 'msm_vibrator_probe':
drivers/input/misc/msm-vibrator.c:176:26: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration]
vibrator->enable_gpio = devm_gpiod_get(&pdev->dev, "enable",
^~~~~~~~~~~~~~
devm_gpio_free
drivers/input/misc/msm-vibrator.c:177:13: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'?
GPIOD_OUT_LOW);
^~~~~~~~~~~~~
GPIOF_INIT_LOW
drivers/input/misc/msm-vibrator.c:177:13: note: each undeclared identifier is reported only once for each function it appears in
This is easy to avoid when we use gpio/consumer.h as the documented interface.
Fixes: 0f681d09e66e ("Input: add new vibrator driver for various MSM SOCs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pull rdma updates from Jason Gunthorpe:
"This has been a slightly more active cycle than normal with ongoing
core changes and quite a lot of collected driver updates.
- Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe
- A new data transfer mode for HFI1 giving higher performance
- Significant functional and bug fix update to the mlx5
On-Demand-Paging MR feature
- A chip hang reset recovery system for hns
- Change mm->pinned_vm to an atomic64
- Update bnxt_re to support a new 57500 chip
- A sane netlink 'rdma link add' method for creating rxe devices and
fixing the various unregistration race conditions in rxe's
unregister flow
- Allow lookup up objects by an ID over netlink
- Various reworking of the core to driver interface:
- drivers should not assume umem SGLs are in PAGE_SIZE chunks
- ucontext is accessed via udata not other means
- start to make the core code responsible for object memory
allocation
- drivers should convert struct device to struct ib_device via a
helper
- drivers have more tools to avoid use after unregister problems"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits)
net/mlx5: ODP support for XRC transport is not enabled by default in FW
IB/hfi1: Close race condition on user context disable and close
RDMA/umem: Revert broken 'off by one' fix
RDMA/umem: minor bug fix in error handling path
RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp
cxgb4: kfree mhp after the debug print
IB/rdmavt: Fix concurrency panics in QP post_send and modify to error
IB/rdmavt: Fix loopback send with invalidate ordering
IB/iser: Fix dma_nents type definition
IB/mlx5: Set correct write permissions for implicit ODP MR
bnxt_re: Clean cq for kernel consumers only
RDMA/uverbs: Don't do double free of allocated PD
RDMA: Handle ucontext allocations by IB/core
RDMA/core: Fix a WARN() message
bnxt_re: fix the regression due to changes in alloc_pbl
IB/mlx4: Increase the timeout for CM cache
IB/core: Abort page fault handler silently during owning process exit
IB/mlx5: Validate correct PD before prefetch MR
IB/mlx5: Protect against prefetch of invalid MR
RDMA/uverbs: Store PR pointer before it is overwritten
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- Use match_string() instead of reimplementing it (Andy Shevchenko)
- Enable SERR# forwarding for all bridges (Bharat Kumar Gogada)
- Use Latency Tolerance Reporting if already enabled by platform (Bjorn
Helgaas)
- Save/restore LTR info for suspend/resume (Bjorn Helgaas)
- Fix DPC use of uninitialized data (Dongdong Liu)
- Probe bridge window attributes only once at enumeration-time to fix
device accesses during rescan (Bjorn Helgaas)
- Return BAR size (not "size -1 ") from pci_size() to simplify code (Du
Changbin)
- Use config header type (not class code) identify bridges more
reliably (Honghui Zhang)
- Work around Intel Denverton incorrect Trace Hub BAR size reporting
(Alexander Shishkin)
- Reorder pciehp cached state/hardware state updates to avoid missed
interrupts (Mika Westerberg)
- Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann)
- Mark expected switch fall-through (Mathieu Malaterre)
- Use of_node_name_eq() for node name comparisons (Rob Herring)
- Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang)
- Consolidate Rohm Vendor ID definitions (Andy Shevchenko)
- Use u32 (not __u32) for things not exposed to userspace (Logan
Gunthorpe)
- Fix locking semantics of bus and slot reset interfaces (Alex
Williamson)
- Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang)
- Allow portdrv to claim subtractive decode Ports so PCIe services will
work for them (Honghui Zhang)
- Report PCIe links that become degraded at run-time (Alexandru
Gagniuc)
- Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt
hotplug (Mika Westerberg)
- Revert runtime PM suspend/resume callbacks that broke PME on network
cable plug (Mika Westerberg)
- Disable Data Link State Changed interrupts to prevent wakeup
immediately after suspend (Mika Westerberg)
- Extend altera to support Stratix 10 (Ley Foon Tan)
- Allow building altera driver on ARM64 (Ley Foon Tan)
- Replace Douglas with Tom Joseph as Cadence PCI host/endpoint
maintainer (Lorenzo Pieralisi)
- Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro)
- Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I)
- Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay
Abraham I)
- Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I)
- Simplify dwc (remove unnecessary header includes, name variables
consistently, reduce inverted logic, etc) (Gustavo Pimentel)
- Add i.MX8MQ support (Andrey Smirnov)
- Add message to help debug dwc MSI-X mask bit errors (Gustavo
Pimentel)
- Work around imx7d PCIe PLL erratum (Trent Piepho)
- Don't assert qcom reset GPIO during probe (Bjorn Andersson)
- Skip dwc MSI init if MSIs have been disabled (Lucas Stach)
- Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI
endpoint framework (Wen Yang)
- Add interface to discover supported endpoint features to replace a
bitfield that wasn't flexible enough (Kishon Vijay Abraham I)
- Implement the new supported-feature interface for designware-plat,
dra7xx, rockchip, cadence (Kishon Vijay Abraham I)
- Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I)
- Add layerscape endpoint mode support (Xiaowei Bao)
- Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya
Nakamura)
- Rework hv_irq_unmask() to use cpumask_to_vpset() instead of
open-coded reimplementation (Maya Nakamura)
- Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura)
- Fix mediatek MMIO size computation to enable full size of available
MMIO space (Honghui Zhang)
- Fix mediatek DMA window size computation to allow endpoint DMA access
to full DRAM address range (Honghui Zhang)
- Fix mvebu prefetchable BAR regression caused by common bridge
emulation that assumed all bridges had prefetchable windows (Thomas
Petazzoni)
- Make advk_pci_bridge_emul_ops static (Wei Yongjun)
- Configure MPS settings for VMD root ports (Jon Derrick)
* tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits)
PCI: Update PCIEPORTBUS Kconfig help text
PCI: Fix "try" semantics of bus and slot reset
PCI/LINK: Report degraded links via link bandwidth notification
dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0
PCI: altera: Enable driver on ARM64
PCI: altera: Add Stratix 10 PCIe support
PCI/PME: Fix possible use-after-free on remove
PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static
PCI: dwc: skip MSI init if MSIs have been explicitly disabled
PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
PCI: hv: Replace hv_vp_set with hv_vpset
PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt
PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM
PCI: mediatek: Fix memory mapped IO range size computation
PCI: dwc: Remove superfluous shifting in definitions
PCI: dwc: Make use of GENMASK/FIELD_PREP
PCI: dwc: Make use of BIT() in constant definitions
PCI: dwc: Share code for dw_pcie_rd/wr_other_conf()
PCI: dwc: Make use of IS_ALIGNED()
PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- remove sensor drivers that got converted from soc_camera
- remaining soc_camera drivers got moved to staging
- some documentation cleanups and improvements
- the imx staging driver now supports imx7
- the ov9640, mt9m001 and mt9m111 got converted from soc_camera
- the vim2m driver now does what a m2m convert driver expects to do
- epoll() fixes on media subsystems
- several drivers fixes, typos, cleanups and improvements
* tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (346 commits)
media: dvb/earth-pt1: fix wrong initialization for demod blocks
media: vim2m: Address some coding style issues
media: vim2m: don't use BUG()
media: vim2m: speedup passthrough copy
media: vim2m: add an horizontal scaler
media: vim2m: don't accept YUYV anymore as output format
media: vim2m: add vertical linear scaler
media: vim2m: better handle cap/out buffers with different sizes
media: vim2m: use different framesizes for bayer formats
media: vim2m: add support for VIDIOC_ENUM_FRAMESIZES
media: vim2m: ensure that width is multiple of two
media: vim2m: improve debug messages
media: vim2m: add bayer capture formats
media: a few more typos at staging, pci, platform, radio and usb
media: Documentation: fix several typos
media: staging: fix several typos
media: include: fix several typos
media: common: fix several typos
media: v4l2-core: fix several typos
media: usb: fix several typos
...
|
|
When building with -Wsometimes-uninitialized, Clang warns:
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable
'ns' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable
'ns' is used uninitialized whenever '&&' condition is false
[-Werror,-Wsometimes-uninitialized]
Clang is concerned with the use of stmmac_do_void_callback (which
stmmac_get_systime wraps), as it may fail to initialize these values if
the if condition was ever false (meaning the callback doesn't exist).
It's not wrong because the callback is what initializes ns. While it's
unlikely that the callback is going to disappear at some point and make
that condition false, we can easily avoid this warning by zero
initializing the variable.
Link: https://github.com/ClangBuiltLinux/linux/issues/384
Fixes: df103170854e ("net: stmmac: Avoid sometimes uninitialized Clang warnings")
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By default, the switch driver is expected to configure CPU and DSA
ports to their maximum speed. For the 6341 and 6390 families, the
ports interface mode has to be configured as well. The 6390X range
support 10G ports using XAUI, while the 6341 and 6390 supports
2500BaseX, as their maximum speed.
Fixes: 787799a9d555 ("net: dsa: mv88e6xxx: Default ports 9/10 6390X CMODE to 1000BaseX")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
niu_add_ethtool_tcam_entry
When building with -Wsometimes-uninitialized, Clang warns:
drivers/net/ethernet/sun/niu.c:7466:5: warning: variable 'class' is used
uninitialized whenever switch default is taken
[-Wsometimes-uninitialized]
The default case can never happen because i can only be 0 to 3
(NIU_L3_PROG_CLS is defined as 4). To make this clear to Clang,
just zero initialize class in the default case (use the macro
CLASS_CODE_UNRECOG to make it clear this shouldn't happen).
Link: https://github.com/ClangBuiltLinux/linux/issues/403
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add PCI vendor and device identifier for U.S. Robotics USR997901A
10/100 Cardbus NIC. Tested on real hardware.
Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On some architectures, the MMU can be disabled, leading to access_ok()
becoming an empty macro that does not evaluate its size argument,
which in turn produces an unused-variable warning:
drivers/vhost/vhost.c:1191:9: error: unused variable 's' [-Werror,-Wunused-variable]
size_t s = vhost_has_feature(vq, VIRTIO_RING_F_EVENT_IDX) ? 2 : 0;
Mark the variable as __maybe_unused to shut up that warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
proc_exit_connector() uses ->real_parent lockless. This is not
safe that its parent can go away at any moment, so use RCU to
protect it, and ensure that this task is not released.
[ 747.624551] ==================================================================
[ 747.632946] BUG: KASAN: use-after-free in proc_exit_connector+0x1f7/0x310
[ 747.640686] Read of size 4 at addr ffff88a0276988e0 by task sshd/2882
[ 747.648032]
[ 747.649804] CPU: 11 PID: 2882 Comm: sshd Tainted: G E 4.19.26-rc2 #11
[ 747.658629] Hardware name: IBM x3550M4 -[7914OFV]-/00AM544, BIOS -[D7E142BUS-1.71]- 07/31/2014
[ 747.668419] Call Trace:
[ 747.671269] dump_stack+0xf0/0x19b
[ 747.675186] ? show_regs_print_info+0x5/0x5
[ 747.679988] ? kmsg_dump_rewind_nolock+0x59/0x59
[ 747.685302] print_address_description+0x6a/0x270
[ 747.691162] kasan_report+0x258/0x380
[ 747.695835] ? proc_exit_connector+0x1f7/0x310
[ 747.701402] proc_exit_connector+0x1f7/0x310
[ 747.706767] ? proc_coredump_connector+0x2d0/0x2d0
[ 747.712715] ? _raw_write_unlock_irq+0x29/0x50
[ 747.718270] ? _raw_write_unlock_irq+0x29/0x50
[ 747.723820] ? ___preempt_schedule+0x16/0x18
[ 747.729193] ? ___preempt_schedule+0x16/0x18
[ 747.734574] do_exit+0xa11/0x14f0
[ 747.738880] ? mm_update_next_owner+0x590/0x590
[ 747.744525] ? debug_show_all_locks+0x3c0/0x3c0
[ 747.761448] ? ktime_get_coarse_real_ts64+0xeb/0x1c0
[ 747.767589] ? lockdep_hardirqs_on+0x1a6/0x290
[ 747.773154] ? check_chain_key+0x139/0x1f0
[ 747.778345] ? check_flags.part.35+0x240/0x240
[ 747.783908] ? __lock_acquire+0x2300/0x2300
[ 747.789171] ? _raw_spin_unlock_irqrestore+0x59/0x70
[ 747.795316] ? _raw_spin_unlock_irqrestore+0x59/0x70
[ 747.801457] ? do_raw_spin_unlock+0x10f/0x1e0
[ 747.806914] ? do_raw_spin_trylock+0x120/0x120
[ 747.812481] ? preempt_count_sub+0x14/0xc0
[ 747.817645] ? _raw_spin_unlock+0x2e/0x50
[ 747.822708] ? __handle_mm_fault+0x12db/0x1fa0
[ 747.828367] ? __pmd_alloc+0x2d0/0x2d0
[ 747.833143] ? check_noncircular+0x50/0x50
[ 747.838309] ? match_held_lock+0x7f/0x340
[ 747.843380] ? check_noncircular+0x50/0x50
[ 747.848561] ? handle_mm_fault+0x21a/0x5f0
[ 747.853730] ? check_flags.part.35+0x240/0x240
[ 747.859290] ? check_chain_key+0x139/0x1f0
[ 747.864474] ? __do_page_fault+0x40f/0x760
[ 747.869655] ? __audit_syscall_entry+0x4b/0x1f0
[ 747.875319] ? syscall_trace_enter+0x1d5/0x7b0
[ 747.880877] ? trace_raw_output_preemptirq_template+0x90/0x90
[ 747.887895] ? trace_raw_output_sys_exit+0x80/0x80
[ 747.893860] ? up_read+0x3b/0x90
[ 747.898142] ? stop_critical_timings+0x260/0x260
[ 747.903909] do_group_exit+0xe0/0x1c0
[ 747.908591] ? __x64_sys_exit+0x30/0x30
[ 747.913460] ? trace_raw_output_preemptirq_template+0x90/0x90
[ 747.920485] ? tracer_hardirqs_on+0x270/0x270
[ 747.925956] __x64_sys_exit_group+0x28/0x30
[ 747.931214] do_syscall_64+0x117/0x400
[ 747.935988] ? syscall_return_slowpath+0x2f0/0x2f0
[ 747.941931] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 747.947788] ? trace_hardirqs_on_caller+0x1d0/0x1d0
[ 747.953838] ? lockdep_sys_exit+0x16/0x8e
[ 747.958915] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 747.964784] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 747.971021] RIP: 0033:0x7f572f154c68
[ 747.975606] Code: Bad RIP value.
[ 747.979791] RSP: 002b:00007ffed2dfaa58 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[ 747.989324] RAX: ffffffffffffffda RBX: 00007f572f431840 RCX: 00007f572f154c68
[ 747.997910] RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001
[ 748.006495] RBP: 0000000000000001 R08: 00000000000000e7 R09: fffffffffffffee0
[ 748.015079] R10: 00007f572f4387e8 R11: 0000000000000246 R12: 00007f572f431840
[ 748.023664] R13: 000055a7f90f2c50 R14: 000055a7f96e2310 R15: 000055a7f96e2310
[ 748.032287]
[ 748.034509] Allocated by task 2300:
[ 748.038982] kasan_kmalloc+0xa0/0xd0
[ 748.043562] kmem_cache_alloc_node+0xf5/0x2e0
[ 748.049018] copy_process+0x1781/0x4790
[ 748.053884] _do_fork+0x166/0x9a0
[ 748.058163] do_syscall_64+0x117/0x400
[ 748.062943] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 748.069180]
[ 748.071405] Freed by task 15395:
[ 748.075591] __kasan_slab_free+0x130/0x180
[ 748.080752] kmem_cache_free+0xc2/0x310
[ 748.085619] free_task+0xea/0x130
[ 748.089901] __put_task_struct+0x177/0x230
[ 748.095063] finish_task_switch+0x51b/0x5d0
[ 748.100315] __schedule+0x506/0xfa0
[ 748.104791] schedule+0xca/0x260
[ 748.108978] futex_wait_queue_me+0x27e/0x420
[ 748.114333] futex_wait+0x251/0x550
[ 748.118814] do_futex+0x75b/0xf80
[ 748.123097] __x64_sys_futex+0x231/0x2a0
[ 748.128065] do_syscall_64+0x117/0x400
[ 748.132835] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 748.139066]
[ 748.141289] The buggy address belongs to the object at ffff88a027698000
[ 748.141289] which belongs to the cache task_struct of size 12160
[ 748.156589] The buggy address is located 2272 bytes inside of
[ 748.156589] 12160-byte region [ffff88a027698000, ffff88a02769af80)
[ 748.171114] The buggy address belongs to the page:
[ 748.177055] page:ffffea00809da600 count:1 mapcount:0 mapping:ffff888107d01e00 index:0x0 compound_mapcount: 0
[ 748.189136] flags: 0x57ffffc0008100(slab|head)
[ 748.194688] raw: 0057ffffc0008100 ffffea00809a3200 0000000300000003 ffff888107d01e00
[ 748.204424] raw: 0000000000000000 0000000000020002 00000001ffffffff 0000000000000000
[ 748.214146] page dumped because: kasan: bad access detected
[ 748.220976]
[ 748.223197] Memory state around the buggy address:
[ 748.229128] ffff88a027698780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 748.238271] ffff88a027698800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 748.247414] >ffff88a027698880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 748.256564] ^
[ 748.264267] ffff88a027698900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 748.273493] ffff88a027698980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 748.282630] ==================================================================
Fixes: b086ff87251b4a4 ("connector: add parent pid and tgid to coredump and exit events")
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vxlan_cleanup() is a timer callback, it is already
and only running in BH context.
Signed-off-by: Litao Jiao <jiaolitao@raisecom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
HW can not guarantee complete write desc->rx.size, even though
HNS3_RXD_VLD_B has been set. Driver needs to add dma_rmb()
instruction to make sure desc->rx.size is always valid.
Fixes: e55970950556 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull block layer updates from Jens Axboe:
"Not a huge amount of changes in this round, the biggest one is that we
finally have Mings multi-page bvec support merged. Apart from that,
this pull request contains:
- Small series that avoids quiescing the queue for sysfs changes that
match what we currently have (Aleksei)
- Series of bcache fixes (via Coly)
- Series of lightnvm fixes (via Mathias)
- NVMe pull request from Christoph. Nothing major, just SPDX/license
cleanups, RR mp policy (Hannes), and little fixes (Bart,
Chaitanya).
- BFQ series (Paolo)
- Save blk-mq cpu -> hw queue mapping, removing a pointer indirection
for the fast path (Jianchao)
- fops->iopoll() added for async IO polling, this is a feature that
the upcoming io_uring interface will use (Christoph, me)
- Partition scan loop fixes (Dongli)
- mtip32xx conversion from managed resource API (Christoph)
- cdrom registration race fix (Guenter)
- MD pull from Song, two minor fixes.
- Various documentation fixes (Marcos)
- Multi-page bvec feature. This brings a lot of nice improvements
with it, like more efficient splitting, larger IOs can be supported
without growing the bvec table size, and so on. (Ming)
- Various little fixes to core and drivers"
* tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits)
block: fix updating bio's front segment size
block: Replace function name in string with __func__
nbd: propagate genlmsg_reply return code
floppy: remove set but not used variable 'q'
null_blk: fix checking for REQ_FUA
block: fix NULL pointer dereference in register_disk
fs: fix guard_bio_eod to check for real EOD errors
blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map
block: optimize bvec iteration in bvec_iter_advance
block: introduce mp_bvec_for_each_page() for iterating over page
block: optimize blk_bio_segment_split for single-page bvec
block: optimize __blk_segment_map_sg() for single-page bvec
block: introduce bvec_nth_page()
iomap: wire up the iopoll method
block: add bio_set_polled() helper
block: wire up block device iopoll method
fs: add an iopoll method to struct file_operations
loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()
loop: do not print warn message if partition scan is successful
block: bounce: make sure that bvec table is updated
...
|
|
Pull libata updates from Jens Axboe:
"Pretty quiet round: a few small fixes, comment typo, and most notably
a low level driver for the PATA Buddha controller"
* tag 'for-5.1/libata-20190301' of git://git.kernel.dk/linux-block:
ata: libahci: Only warn for AHCI_HFLAG_MULTI_MSI set when genuine custom irq handler implemented
libata: fix a typo in comment
ata: macio: Use of_node_name_eq for node name comparisons
ata: pata_samsung_cf: simplify getting .driver_data
ata: pata_platform: Add IRQF_SHARED to IRQ flags
ata: pata_of_platform: Allow to use 16-bit wide data transfer
ata: add Buddha PATA controller driver
|
|
In Documentation stmmac.txt there is possibility to
fixed CSR Clock range selection with property clk_csr.
This patch add the management of this property
For example to use it, add in your ethernet node DT:
clk_csr = <3>;
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update glue codes to support all PHY config on stm32mp157c
PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz),
PHY wo crystal (50Mhz), No 125Mhz from PHY config.
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add glue codes to support magic packet on stm32mp157c
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we receive a packet while deleting a VXLAN device, there's a chance
vxlan_rcv() is called at the same time as vxlan_dellink(). This is fine,
except that vxlan_dellink() should never ever touch stuff that's still in
use, such as the GRO cells list.
Otherwise, vxlan_rcv() crashes while queueing packets via
gro_cells_receive().
Move the gro_cells_destroy() to vxlan_uninit(), which runs after the RCU
grace period is elapsed and nothing needs the gro_cells anymore.
This is now done in the same way as commit 8e816df87997 ("geneve: Use GRO
cells infrastructure.") originally implemented for GENEVE.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 58ce31cca1ff ("vxlan: GRO support at tunnel layer")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.1 cycle:
Core changes:
- The big change this time around is the irqchip handling in the
qualcomm pin controllers, closely coupled with the gpiochip. This
rework, in a classic fall-between-the-chairs fashion has been
sidestepped for too long.
The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms
have been rewritten to use hierarchical irqchip. This creates the
base from which I intend to gradually pull support for hierarchical
irqchips into the gpiolib irqchip helpers to cut down on duplicate
code.
We have too many hacks in the kernel because people have been
working around the missing hierarchical irqchip for years, and once
it was there, noone understood it for a while. We are now slowly
adapting to using it.
This is why this pull requests include changes to MFD, SPMI,
IRQchip core and some ARM Device Trees pertaining to the Qualcomm
chip family. Since Qualcomm have so many chips and such large
deployments it is paramount that this platform gets this right, and
now it (hopefully) does.
- Core support for pull-up and pull-down configuration, also from the
device tree. When a simple GPIO chip supports an "off or on" pull-up
or pull-down resistor, we provide a way to set this up using
machine descriptors or device tree.
If more elaborate control of pull up/down (such as resistance shunt
setting) is required, drivers should be phased over to use pin
control. We do not yet provide a userspace ABI for this pull
up-down setting but I suspect the makers are going to ask for it
soon enough. PCA953x is the first user of this new API.
- The GPIO mockup driver has been revamped after some discussion
improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for both testing
and virtual prototyping, e.g. when you do not yet have a GPIO
expander to play with but really want to get something to develop
code around before hardware is available. It's neat. The blackbox
testing usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating flags.
- A new device core helper for devm_platform_ioremap_resource() is
funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers"
* tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits)
gpio: gpio-omap: fix level interrupt idling
gpio: amd-fch: Set proper output level for direction_output
x86: apuv2: remove unused variable
gpio: pca953x: Use PCA_LATCH_INT
platform/x86: fix PCENGINES_APU2 Kconfig warning
gpio: pca953x: Fix dereference of irq data in shutdown
gpio: amd-fch: Fix type error found by sparse
gpio: amd-fch: Drop const from resource
gpio: mxc: add check to return defer probe if clock tree NOT ready
gpio: ftgpio: Register per-instance irqchip
gpio: ixp4xx: Add DT bindings
x86: pcengines apuv2 gpio/leds/keys platform driver
gpio: AMD G-Series PCH gpio driver
drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()
gpio: tqmx86: Set proper output level for direction_output
gpio: sprd: Change to use SoC compatible string
gpio: sprd: Use SoC compatible string instead of wildcard string
gpio: of: Handle both enable-gpio{,s}
gpio: of: Restrict enable-gpio quirk to regulator-gpio
gpio: davinci: use devm_platform_ioremap_resource()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add STMPE ADC Input driver
- Add STMicroelectronics STPMIC1 Parent driver
- Add STMicroelectronics STPMIC1 OnKey Misc driver
- Add STMicroelectronics STPMIC1 Watchdog driver
- Add Cirrus Logic Lochnagar Parent driver
- Add TQ-Systems TQMX86 Parent driver
New Device Support:
- Add support for ADC to STMPE
New (or moved) Functionality:
- Move Lightbar functionality to its own driver; cros_ec_lightbar
- Move VBC functionality to its own driver; cros_ec_vbc
- Move VBC functionality to its own driver; cros_ec_vbc
- Move DebugFS functionality to its own driver; cros_ec_debugfs
- Move SYSFS functionality to its own driver; cros_ec_sysfs
- Add support for input voltage options; tps65218
Fixes:
- Use devm_* managed resources; cros_ec
- Device Tree documentation; stmpe, aspeed-lpc, lochnagar
- Trivial Clean-ups; stmpe
- Rip out broken modular code; aat2870-core, adp5520, as3711,
db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd,
syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi,
wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core
- Kconfig fixups; INTEL_SOC_PMIC
- Improve error path; sm501, sec-core
- Use struct_size() helper; sm501
- Constify; at91-usart
- Use pointers instead of copying data; at91-usart
- Deliver proper return value; cros_ec_dev
- Trivial formatting/whitespace; sec-core"
* tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits)
mfd: mxs-lradc: Mark expected switch fall-through
mfd: sec-core: Cleanup formatting to a consistent style
mfd: tqmx86: IO controller with I2C, Wachdog and GPIO
mfd: intel-lpss: Move linux/pm.h to the local header
mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEM
mfd: tps68470: Drop unused MODULE_DEVICE_TABLE
mfd: at91-usart: No need to copy mfd_cell in probe
mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdev
mfd: lochnagar: Add support for the Cirrus Logic Lochnagar
mfd: lochnagar: Add initial binding documentation
dt-bindings: mfd: aspeed-lpc: Make parameter optional
mfd: sec-core: Return gracefully instead of BUG() if device cannot match
mfd: sm501: Use struct_size() in devm_kzalloc()
mfd: sm501: Fix potential NULL pointer dereference
mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies
mfd: tps65218.c: Add input voltage options
mfd: wm8400-core: Make it explicitly non-modular
mfd: wm8350-core: Drop unused module infrastructure from non-modular code
mfd: wm8350-i2c: Make it explicitly non-modular
mfd: wm831x-core: Drop unused module infrastructure from non-modular code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight fixlet from Lee Jones:
"Allow GPIO call to sleep in pwm_bl driver"
* tag 'backlight-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: pwm_bl: Use gpiod_get_value_cansleep() to get initial state
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There is an unusual amount of new drivers this cycle, and this
explains the number of insertions.
Other than that, the changes are the usual fixes and feature addition.
Subsystem updates:
- new quartz-load-femtofarads DT property for quartz load capacitance
- remove rtc_class_ops.read_callback
New drivers:
- Abracon AB-RTCMC-32.768kHz-EOZ9
- Amlogic Meson RTC
- Cadence RTC IP
- Microcrystal RV3028
- Whwave sd3078
Driver updates:
- cmos: ignore bogus century byte
- ds1307: rework rx8130 support
- isl1208: add isl1209 support, nvmem support
- rs5C372: report invalid time when the oscillator stopped
- rx8581: add rx8571 support"
* tag 'rtc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (66 commits)
rtc: pic32: convert to SPDX identifier
rtc: pic32: let the core handle range
rtc: pic32: convert to devm_rtc_allocate_device
rtc: update my email address
rtc: rv8803: convert to SPDX identifier
rtc: rv8803: let the core handle range
rtc: tx4939: convert to SPDX identifier
rtc: tx4939: use .set_time
rtc: tx4939: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: tx4939: set range
rtc: tx4939: remove useless test
rtc: zynqmp: let the core handle range
rtc: zynqmp: fix possible race condition
rtc: imx-sc: use rtc_time64_to_tm
rtc: rx8581: Add support for Epson rx8571 RTC
dt-bindings: rtc: add rx8571 compatible
rtc: pcf85063: remove dead code
rtc: remove rtc_class_ops.read_callback
rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support
dt-bindings: rtc: add ABEOZ9
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal soc updates from Eduardo Valentin:
"Specifics:
- mediatek thermal now supports MT8183
- broadcom thermal now supports Stingray
- qoirq now supports multiple sensors
- fixes on different drivers: rcar, tsens, tegra
Some new drivers are still pending further review and I chose to leave
them for the next merge window while still sending this material"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: rcar_gen3_thermal: Register hwmon sysfs interface
thermal/qcom/tsens-common : fix possible object reference leak
thermal: tegra: add get_trend ops
thermal: tegra: fix memory allocation
thermal: tegra: remove unnecessary warnings
thermal: mediatek: add support for MT8183
dt-bindings: thermal: add binding document for mt8183 thermal controller
thermal: mediatek: add flag for bank selection
thermal: mediatek: add thermal controller offset
thermal: mediatek: add calibration item
thermal: mediatek: add common index of vts settings.
thermal: mediatek: fix register index error
thermal: qoriq: add multiple sensors support
thermal: broadcom: Add Stingray thermal driver
dt-bindings: thermal: Add binding document for SR thermal
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft
Pull ibft updates from Konrad Rzeszutek Wilk:
"Two tiny fixes - a missing break, and upgrading the subsystem to use
modern macros"
* 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: use virt_to_phys instead of isa_virt_to_bus
iscsi_ibft: Fix missing break in switch statement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- the I2C core gained helpers to assist drivers in handling their
suspended state, and drivers were converted to use it
- two new fault-injectors for stress-testing
- bigger refactoring and feature improvements for the ocores,
sh_mobile, and tegra drivers
- platform_data removal for the at24 EEPROM driver
- ... and various improvements and bugfixes all over the subsystem
* 'i2c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: Allow recovery of the initial IRQ by an I2C client device.
i2c: ocores: turn incomplete kdoc into a comment
i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
i2c: tegra: Only display error messages if DMA setup fails
i2c: gpio: fault-injector: add 'inject_panic' injector
i2c: gpio: fault-injector: add 'lose_arbitration' injector
i2c: tegra: remove multi-master support
i2c: tegra: remove master fifo support on tegra186
i2c: tegra: change phrasing, "fallbacking" to "falling back"
i2c: expand minor range when registering chrdev region
i2c: aspeed: Add multi-master use case support
i2c: core-smbus: don't trace smbus_reply data on errors
i2c: ocores: Add support for bus clock via platform data
i2c: ocores: Add support for IO mapper registers.
i2c: ocores: checkpatch fixes
i2c: ocores: add SPDX tag
i2c: ocores: add polling interface
i2c: ocores: do not handle IRQ if IF is not set
i2c: ocores: stop transfer on timeout
i2c: tegra: add i2c interface timing support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Nothing too fancy in the power-supply subsystem this time. There are
less patches than usual, since I did not have enough time to review
them in time. The good news is, that all patches have been in
linux-next for more than two weeks and there are no complicated
cross-subsystem patchsets this time!
Summary:
- at91-reset: add sam9x60 support
- sc27xx: improve capacity logic
- goldfish_battery: enhance driver by adding many new properties
- isp1704: drop platform data and migrate to gpiod
- misc small fixes and improvements"
* tag 'for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (25 commits)
power: reset: at91-reset: add support for sam9x60 SoC
dt-bindings: arm: atmel: add new sam9x60 reset controller binding
dt-bindings: arm: atmel: add missing samx7 to reset controller
max17042_battery: fix potential use-after-free on device remove
power: supply: core: Add a field to support battery max voltage
dt-bindings: power: supply: Add voltage-max-design-microvolt property
bq27x00: use cached flags
power: supply: ds2782: fix possible use-after-free on remove
power: supply: bq25890: show max charge current/voltage as configured
power: supply: sc27xx: Fix capacity saving function
power: supply: sc27xx: Fix the incorrect formula when converting capacity to coulomb counter
power: supply: sc27xx: Add one property to read charge voltage
dt-bindings: power: sc27xx: Add one IIO channel to read charge voltage
drivers: power: supply: goldfish_battery: Add support for reading more properties
power: supply: charger-manager: Fix trivial language typos
cpcap-charger: generate events for userspace
power: supply: remove some duplicated includes
power: twl4030: fix a missing check of return value
drivers: power: supply: goldfish_battery: Use tabs for alignment
drivers: power: supply: goldfish_battery: Fix alignment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HIS update from Sebastian Reichel:
"Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE"
* tag 'hsi-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: omap_ssi_port: fix debugfs_simple_attr.cocci warnings
|
