| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull randomness fixes from Ted Ts'o:
"Improve performance by using a lockless update mechanism suggested by
Linus, and make sure we refresh per-CPU entropy returned get_random_*
as soon as the CRNG is initialized"
* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: invalidate batched entropy after crng init
random: use lockless method of accessing and updating f->reg_idx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"A few overdue GPIO patches for the v4.12 kernel.
- Fix debounce logic on the Aspeed platform.
- Fix the "virtual gpio" things on the Intel Crystal Cove.
- Fix the blink counter selection on the MVEBU platform"
* tag 'gpio-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mvebu: fix gpio bank registration when pwm is used
gpio: mvebu: fix blink counter register selection
MAINTAINERS: remove self from GPIO maintainers
gpio: crystalcove: Do not write regular gpio registers for virtual GPIOs
gpio: aspeed: Don't attempt to debounce if disabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes for 4.12-rc5. Nothing major here,
just some small bugfixes found by people testing, and a MAINTAINERS
file update for the genwqe driver.
All have been in linux-next with no reported issues"
[ The cxl driver fix came in through the powerpc tree earlier ]
* tag 'char-misc-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
cxl: Avoid double free_irq() for psl,slice interrupts
mei: make sysfs modalias format similar as uevent modalias
drivers: char: mem: Fix wraparound check to allow mappings up to the end
MAINTAINERS: Change maintainer of genwqe driver
goldfish_pipe: use GFP_ATOMIC under spin lock
firmware: vpd: do not leak kobjects
firmware: vpd: avoid potential use-after-free when destroying section
firmware: vpd: do not leave freed section attributes to the list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"These are mostly all IIO driver fixes, resolving a number of tiny
issues. There's also a ccree and lustre fix in here as well, both fix
problems found in those codebases.
All have been in linux-next with no reported issues"
* tag 'staging-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: ccree: fix buffer copy
staging/lustre/lov: remove set_fs() call from lov_getstripe()
staging: ccree: add CRYPTO dependency
iio: adc: sun4i-gpadc-iio: fix parent device being used in devm function
iio: light: ltr501 Fix interchanged als/ps register field
iio: adc: bcm_iproc_adc: swap primary and secondary isr handler's
iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()
iio: adc: max9611: Fix attribute measure unit
iio: adc: ti_am335x_adc: allocating too much in probe
iio: adc: sun4i-gpadc-iio: Fix module autoload when OF devices are registered
iio: adc: sun4i-gpadc-iio: Fix module autoload when PLATFORM devices are registered
iio: proximity: as3935: fix iio_trigger_poll issue
iio: proximity: as3935: fix AS3935_INT mask
iio: adc: Max9611: checking for ERR_PTR instead of NULL in probe
iio: proximity: as3935: recalibrate RCO after resume
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 4.12-rc5
They are for some reported issues in the chipidea and gadget drivers.
Nothing major. All have been in linux-next for a while with no
reported issues"
* tag 'usb-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: udc: renesas_usb3: Fix PN_INT_ENA disabling timing
usb: gadget: udc: renesas_usb3: lock for PN_ registers access
usb: gadget: udc: renesas_usb3: fix deadlock by spinlock
usb: gadget: udc: renesas_usb3: fix pm_runtime functions calling
usb: gadget: f_mass_storage: Serialize wake and sleep execution
usb: dwc2: add support for the DWC2 controller on Meson8 SoCs
phy: qualcomm: phy-qcom-qmp: fix application of sizeof to pointer
usb: musb: dsps: keep VBUS on for host-only mode
usb: chipidea: core: check before accessing ci_role in ci_role_show
usb: chipidea: debug: check before accessing ci_role
phy: qcom-qmp: fix return value check in qcom_qmp_phy_create()
usb: chipidea: udc: fix NULL pointer dereference if udc_start failed
usb: chipidea: imx: Do not access CLKONOFF on i.MX51
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of user visible fixes (excepting one format string
change).
Four of the qla2xxx fixes only affect the firmware dump path, but it's
still important to the enterprise. The rest are various NULL pointer
crash conditions or outright driver hangs"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: cxgb4i: libcxgbi: in error case RST tcp conn
scsi: scsi_debug: Avoid PI being disabled when TPGS is enabled
scsi: qla2xxx: Fix extraneous ref on sp's after adapter break
scsi: lpfc: prevent potential null pointer dereference
scsi: lpfc: Avoid NULL pointer dereference in lpfc_els_abort()
scsi: lpfc: nvmet_fc: fix format string
scsi: qla2xxx: Fix crash due to NULL pointer dereference of ctx
scsi: qla2xxx: Fix mailbox pointer error in fwdump capture
scsi: qla2xxx: Set bit 15 for DIAG_ECHO_TEST MBC
scsi: qla2xxx: Modify T262 FW dump template to specify same start/end to debug customer issues
scsi: qla2xxx: Fix crash due to mismatch mumber of Q-pair creation for Multi queue
scsi: qla2xxx: Fix NULL pointer access due to redundant fc_host_port_name call
scsi: qla2xxx: Fix recursive loop during target mode configuration for ISP25XX leaving system unresponsive
scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats()
scsi: qla2xxx: don't disable a not previously enabled PCI device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Dan Williams:
"We expanded the device-dax fs type in 4.12 to be a generic provider of
a struct dax_device with an embedded inode. However, Sasha found some
basic negative testing was not run to verify that this fs cleanly
handles being mounted directly.
Note that the fresh rebase was done to remove an unnecessary Cc:
<stable> tag, but this commit otherwise had a build success
notification from the 0day robot."
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: fix 'dax' device filesystem inode destruction crash
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Ingo Molnar:
"A boot crash fix for certain systems where the kernel would trust a
piece of firmware data it should not have"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Fix boot panic because of invalid BGRT image address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- another compile-fix for my header cleanup
- a couple of fixes for the recently merged IOMMU probe deferal code
- fixes for ACPI/IORT code necessary with IOMMU probe deferal
* tag 'iommu-fixes-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
arm: dma-mapping: Reset the device's dma_ops
ACPI/IORT: Move the check to get iommu_ops from translated fwspec
ARM: dma-mapping: Don't tear down third-party mappings
ACPI/IORT: Ignore all errors except EPROBE_DEFER
iommu/of: Ignore all errors except EPROBE_DEFER
iommu/of: Fix check for returning EPROBE_DEFER
iommu/dma: Fix function declaration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- mark "guest" RMI device as pass-through port to avoid "phantom" ALPS
toouchpad on newer Lenovo Carbons
- add two more laptops to the Elantech's lists of devices using CRC
mode
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - register F03 port as pass-through serio
Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled
|
|
Pull MD bugfix from Shaohua Li:
"One bug fix from Neil Brown for MD. The bug was introduced in this
cycle"
* tag 'md/4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md: initialise ->writes_pending in personality modules.
|
|
Pull block fixes from Jens Axboe:
"A set of fixes in the area of block IO, that should go into the next
-rc release. This contains:
- An OOPS fix from Dmitry, fixing a regression with the bio integrity
code in this series.
- Fix truncation of elevator io context cache name, from Eric
Biggers.
- NVMe pull from Christoph includes FC fixes from James, APST
fixes/tweaks from Kai-Heng, removal fix from Rakesh, and an RDMA
fix from Sagi.
- Two tweaks for the block throttling code. One from Joseph Qi,
fixing an oops from the timer code, and one from Shaohua, improving
the behavior on rotatonal storage.
- Two blk-mq fixes from Ming, fixing corner cases with the direct
issue code.
- Locking fix for bfq cgroups from Paolo"
* 'for-linus' of git://git.kernel.dk/linux-block:
block, bfq: access and cache blkg data only when safe
Fix loop device flush before configure v3
blk-throttle: set default latency baseline for harddisk
blk-throttle: fix NULL pointer dereference in throtl_schedule_pending_timer
nvme: relax APST default max latency to 100ms
nvme: only consider exit latency when choosing useful non-op power states
nvme-fc: fix missing put reference on controller create failure
nvme-fc: on lldd/transport io error, terminate association
nvme-rdma: fast fail incoming requests while we reconnect
nvme-pci: fix multiple ctrl removal scheduling
nvme: fix hang in remove path
elevator: fix truncation of icq_cache_name
blk-mq: fix direct issue
blk-mq: pass correct hctx to blk_mq_try_issue_directly
bio-integrity: Do not allocate integrity context for bio w/o data
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Intel, nouveau, rockchip, vmwgfx, imx, meson, mediatek and core fixes.
Bit more spread out fixes this time, fixes for 7 drivers + a couple of
core fixes.
i915 and vmwgfx are the main ones. The vmwgfx ones fix a bunch of
regressions in their atomic rework, and a few fixes destined for
stable. i915 has some 4.12 regressions and older things that need to
be fixed in stable as well.
nouveau also has some runtime pm fixes and a timer list handling fix,
otherwise a couple of core and small driver regression fixes"
* tag 'drm-fixes-for-v4.12-rc5' of git://people.freedesktop.org/~airlied/linux: (37 commits)
drm/i915: fix warning for unused variable
drm/meson: Fix driver bind when only CVBS is available
drm/i915: Fix 90/270 rotated coordinates for FBC
drm/i915: Restore has_fbc=1 for ILK-M
drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail
drm/i915: Fix logical inversion for gen4 quirking
drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally
drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.
drm/i915: Prevent the system suspend complete optimization
drm/i915/psr: disable psr2 for resolution greater than 32X20
drm/i915: Hold a wakeref for probing the ring registers
drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle
drm/i915: Disable decoupled MMIO
drm/i915/guc: Remove stale comment for q_fail
drm/vmwgfx: Bump driver minor and date
drm/vmwgfx: Remove unused legacy cursor functions
drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds"
drm/vmwgfx: Fix large topology crash
drm/vmwgfx: Make sure to update STDU when FB is updated
drm/vmwgfx: Make sure backup_handle is always valid
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for Xen on ARM when dealing with 64kB page size of a guest"
* tag 'for-linus-4.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: Support correctly 64KB page granularity when mapping memory
|
|
The 5th generation Thinkpad X1 Carbons use Synaptics touchpads accessible
over SMBus/RMI, combined with ALPS or Elantech trackpoint devices instead
of classic IBM/Lenovo trackpoints. Unfortunately there is no way for ALPS
driver to detect whether it is dealing with touchpad + trackpoint
combination or just a trackpoint, so we end up with a "phantom" dualpoint
ALPS device in addition to real touchpad and trackpoint.
Given that we do not have any special advanced handling for ALPS or
Elantech trackpoints (unlike IBM trackpoints that have separate driver and
a host of options) we are better off keeping the trackpoints in PS/2
emulation mode. We achieve that by setting serio type to SERIO_PS_PSTHRU,
which will limit number of protocols psmouse driver will try. In addition
to getting rid of the "phantom" touchpads, this will also speed up probing
of F03 pass-through port.
Reported-by: Damjan Georgievski <gdamjan@gmail.com>
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Mostly fairly minor, of note are:
- Fix percpu allocations to be NUMA aware
- Limit 4k page size config to 64TB virtual address space
- Avoid needlessly restoring FP and vector registers
Thanks to Aneesh Kumar K.V, Breno Leitao, Christophe Leroy, Frederic
Barrat, Madhavan Srinivasan, Michael Bringmann, Nicholas Piggin,
Vaibhav Jain"
* tag 'powerpc-4.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/book3s64: Move PPC_DT_CPU_FTRs and enable it by default
powerpc/mm/4k: Limit 4k page size config to 64TB virtual address space
cxl: Fix error path on bad ioctl
powerpc/perf: Fix Power9 test_adder fields
powerpc/numa: Fix percpu allocations to be NUMA aware
cxl: Avoid double free_irq() for psl,slice interrupts
powerpc/kernel: Initialize load_tm on task creation
powerpc/kernel: Fix FP and vector register restoration
powerpc/64: Reclaim CPU_FTR_SUBCORE
powerpc/hotplug-mem: Fix missing endian conversion of aa_index
powerpc/sysdev/simple_gpio: Fix oops in gpio save_regs function
powerpc/spufs: Fix coredump of SPU contexts
powerpc/64s: Add dt_cpu_ftrs boot time setup option
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Been sitting on these for a couple of weeks waiting on some larger
batches to come in but it's been pretty quiet.
Just your garden variety fixes here:
- A few maintainers updates (ep93xx, Exynos, TI, Marvell)
- Some PM fixes for Atmel/at91 and Marvell
- A few DT fixes for Marvell, Versatile, TI Keystone, bcm283x
- A reset driver patch to set module license for symbol access"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
MAINTAINERS: EP93XX: Update maintainership
MAINTAINERS: remove kernel@stlinux.com obsolete mailing list
ARM: dts: versatile: use #include "..." to include local DT
MAINTAINERS: add device-tree files to TI DaVinci entry
ARM: at91: select CONFIG_ARM_CPU_SUSPEND
ARM: dts: keystone-k2l: fix broken Ethernet due to disabled OSR
arm64: defconfig: enable some core options for 64bit Rockchip socs
arm64: marvell: dts: fix interrupts in 7k/8k crypto nodes
reset: hi6220: Set module license so that it can be loaded
MAINTAINERS: add irqchip related drivers to Marvell EBU maintainers
MAINTAINERS: sort F entries for Marvell EBU maintainers
ARM: davinci: PM: Do not free useful resources in normal path in 'davinci_pm_init'
ARM: davinci: PM: Free resources in error handling path in 'davinci_pm_init'
ARM: dts: bcm283x: Reserve first page for firmware
memory: atmel-ebi: mark PM ops as __maybe_unused
MAINTAINERS: Remove Javier Martinez Canillas as reviewer for Exynos
|
|
The inode destruction path for the 'dax' device filesystem incorrectly
assumes that the inode was initialized through 'alloc_dax()'. However,
if someone attempts to directly mount the dax filesystem with 'mount -t
dax dax mnt' that will bypass 'alloc_dax()' and the following failure
signatures may occur as a result:
kill_dax() must be called before final iput()
WARNING: CPU: 2 PID: 1188 at drivers/dax/super.c:243 dax_destroy_inode+0x48/0x50
RIP: 0010:dax_destroy_inode+0x48/0x50
Call Trace:
destroy_inode+0x3b/0x60
evict+0x139/0x1c0
iput+0x1f9/0x2d0
dentry_unlink_inode+0xc3/0x160
__dentry_kill+0xcf/0x180
? dput+0x37/0x3b0
dput+0x3a3/0x3b0
do_one_tree+0x36/0x40
shrink_dcache_for_umount+0x2d/0x90
generic_shutdown_super+0x1f/0x120
kill_anon_super+0x12/0x20
deactivate_locked_super+0x43/0x70
deactivate_super+0x4e/0x60
general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
RIP: 0010:kfree+0x6d/0x290
Call Trace:
<IRQ>
dax_i_callback+0x22/0x60
? dax_destroy_inode+0x50/0x50
rcu_process_callbacks+0x298/0x740
ida_remove called for id=0 which is not allocated.
WARNING: CPU: 0 PID: 0 at lib/idr.c:383 ida_remove+0x110/0x120
[..]
Call Trace:
<IRQ>
ida_simple_remove+0x2b/0x50
? dax_destroy_inode+0x50/0x50
dax_i_callback+0x3c/0x60
rcu_process_callbacks+0x298/0x740
Add missing initialization of the 'struct dax_device' and inode so that
the destruction path does not kfree() or ida_simple_remove()
uninitialized data.
Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider of 'struct dax_device' instances")
Reported-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Maniaxx reported a kernel boot crash in the EFI code, which I emulated
by using same invalid phys addr in code:
BUG: unable to handle kernel paging request at ffffffffff280001
IP: efi_bgrt_init+0xfb/0x153
...
Call Trace:
? bgrt_init+0xbc/0xbc
acpi_parse_bgrt+0xe/0x12
acpi_table_parse+0x89/0xb8
acpi_boot_init+0x445/0x4e2
? acpi_parse_x2apic+0x79/0x79
? dmi_ignore_irq0_timer_override+0x33/0x33
setup_arch+0xb63/0xc82
? early_idt_handler_array+0x120/0x120
start_kernel+0xb7/0x443
? early_idt_handler_array+0x120/0x120
x86_64_start_reservations+0x29/0x2b
x86_64_start_kernel+0x154/0x177
secondary_startup_64+0x9f/0x9f
There is also a similar bug filed in bugzilla.kernel.org:
https://bugzilla.kernel.org/show_bug.cgi?id=195633
The crash is caused by this commit:
7b0a911478c7 efi/x86: Move the EFI BGRT init code to early init code
The root cause is the firmware on those machines provides invalid BGRT
image addresses.
In a kernel before above commit BGRT initializes late and uses ioremap()
to map the image address. Ioremap validates the address, if it is not a
valid physical address ioremap() just fails and returns. However in current
kernel EFI BGRT initializes early and uses early_memremap() which does not
validate the image address, and kernel panic happens.
According to ACPI spec the BGRT image address should fall into
EFI_BOOT_SERVICES_DATA, see the section 5.2.22.4 of below document:
http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf
Fix this issue by validating the image address in efi_bgrt_init(). If the
image address does not fall into any EFI_BOOT_SERVICES_DATA areas we just
bail out with a warning message.
Reported-by: Maniaxx <tripleshiftone@gmail.com>
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code")
Link: http://lkml.kernel.org/r/20170609084558.26766-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
During an eeh call to cxl_remove can result in double free_irq of
psl,slice interrupts. This can happen if perst_reloads_same_image == 1
and call to cxl_configure_adapter() fails during slot_reset
callback. In such a case we see a kernel oops with following back-trace:
Oops: Kernel access of bad area, sig: 11 [#1]
Call Trace:
free_irq+0x88/0xd0 (unreliable)
cxl_unmap_irq+0x20/0x40 [cxl]
cxl_native_release_psl_irq+0x78/0xd8 [cxl]
pci_deconfigure_afu+0xac/0x110 [cxl]
cxl_remove+0x104/0x210 [cxl]
pci_device_remove+0x6c/0x110
device_release_driver_internal+0x204/0x2e0
pci_stop_bus_device+0xa0/0xd0
pci_stop_and_remove_bus_device+0x28/0x40
pci_hp_remove_devices+0xb0/0x150
pci_hp_remove_devices+0x68/0x150
eeh_handle_normal_event+0x140/0x580
eeh_handle_event+0x174/0x360
eeh_event_handler+0x1e8/0x1f0
This patch fixes the issue of double free_irq by checking that
variables that hold the virqs (err_hwirq, serr_hwirq, psl_virq) are
not '0' before un-mapping and resetting these variables to '0' when
they are un-mapped.
Cc: stable@vger.kernel.org
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If more than one gpio bank has the "pwm" property, only one will be
registered successfully, all the others will fail with:
mvebu-gpio: probe of f1018140.gpio failed with error -17
That's because in alloc_pwms(), the chip->base (aka "int pwm"), was not
set (thus, ==0) ; and 0 is a meaningful start value in alloc_pwm().
What was intended is mvpwm->chip->base = -1.
Like that, the numbering will be done auto-magically
Moreover, as the region might be already occupied by another pwm, we
shouldn't force:
mvpwm->chip->base = 0
nor
mvpwm->chip->base = id * MVEBU_MAX_GPIO_PER_BANK;
Tested on clearfog-pro (Marvell 88F6828)
Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The blink counter A was always selected because 0 was forced in the
blink select counter register.
The variable 'set' was obviously there to be used as the register value,
selecting the B counter when id==1 and A counter when id==0.
Tested on clearfog-pro (Marvell 88F6828)
Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support")
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://people.freedesktop.org/~thomash/linux into drm-fixes
A bunch of fixes for vmwgfx 4.12 regressions and older stuff. In the latter
case either trivial, cc'd stable or requiring backports for stable.
* 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Bump driver minor and date
drm/vmwgfx: Remove unused legacy cursor functions
drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds"
drm/vmwgfx: Fix large topology crash
drm/vmwgfx: Make sure to update STDU when FB is updated
drm/vmwgfx: Make sure backup_handle is always valid
drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()
drm/vmwgfx: Don't create proxy surface for cursor
drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()
|
|
git://anongit.freedesktop.org/git/drm-intel into drm-fixes
drm/i915 fixes for v4.12-rc5
* tag 'drm-intel-fixes-2017-06-08' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: fix warning for unused variable
drm/i915: Fix 90/270 rotated coordinates for FBC
drm/i915: Restore has_fbc=1 for ILK-M
drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail
drm/i915: Fix logical inversion for gen4 quirking
drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally
drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.
drm/i915: Prevent the system suspend complete optimization
drm/i915/psr: disable psr2 for resolution greater than 32X20
drm/i915: Hold a wakeref for probing the ring registers
drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle
drm/i915: Disable decoupled MMIO
drm/i915/guc: Remove stale comment for q_fail
drm/i915: Serialize GTT/Aperture accesses on BXT
|
|
git://anongit.freedesktop.org/git/drm-misc into drm-fixes
Driver Changes:
- kirin: Use correct dt port for the bridge (John)
- meson: Fix regression caused by adding HDMI support to allow board
configurations without HDMI (Neil)
Cc: John Stultz <john.stultz@linaro.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
* tag 'drm-misc-fixes-2017-06-07' of git://anongit.freedesktop.org/git/drm-misc:
drm/meson: Fix driver bind when only CVBS is available
drm: kirin: Fix drm_of_find_panel_or_bridge conversion
|
|
https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes
mediatek fixes
* 'mediatek-drm-fixes-4.12-rc1' of https://github.com/ckhu-mediatek/linux.git-tags:
drm/mediatek: fix mtk_hdmi_setup_vendor_specific_infoframe mistake
drm/mediatek: fix a timeout loop
|
|
git://git.pengutronix.de/git/pza/linux into drm-fixes
imx-drm: PRE clock gating, panelless LDB, and VDIC CSI selection fixes
- Keep the external clock input to the PRE ungated and only use the internal
soft reset to keep the module in low power state, to avoid sporadic startup
failures.
- Ignore -ENODEV return values from drm_of_find_panel_or_bridge in the LDB
driver to fix probing for devices that still do not specify a panel in the
device tree.
- Fix the CSI input selection to the VDIC. According to experiments, the real
behaviour differs a bit from the documentation.
* tag 'imx-drm-fixes-2017-06-08' of git://git.pengutronix.de/git/pza/linux:
gpu: ipu-v3: Fix CSI selection for VDIC
drm/imx: imx-ldb: Accept drm_of_find_panel_or_bridge failure
gpu: ipu-v3: pre: only use internal clock gating
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These revert one problematic commit related to system sleep and fix
one recent intel_pstate regression.
Specifics:
- Revert a recent commit that attempted to avoid spurious wakeups
from suspend-to-idle via ACPI SCI, but introduced regressions on
some systems (Rafael Wysocki).
We will get back to the problem it tried to address in the next
cycle.
- Fix a possible division by 0 during intel_pstate initialization
due to a missing check (Rafael Wysocki)"
* tag 'pm-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"
cpufreq: intel_pstate: Avoid division by 0 in min_perf_pct_min()
|
|
* intel_pstate:
cpufreq: intel_pstate: Avoid division by 0 in min_perf_pct_min()
* pm-sleep:
Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"
|
|
Christoph writes:
"A few NVMe fixes for 4.12-rc, PCIe reset fixes and APST fixes, a
RDMA reconnect fix, two FC fixes and a general controller removal fix."
|
|
drivers/gpu/drm/i915/intel_engine_cs.c: In function ‘intel_engine_is_idle’:
drivers/gpu/drm/i915/intel_engine_cs.c:1103:27: error: unused variable ‘dev_priv’ [-Werror=unused-variable]
struct drm_i915_private *dev_priv = engine->i915;
^~~~~~~~
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
While installing SLES-12 (based on v4.4), I found that the installer
will stall for 60+ seconds during LVM disk scan. The root cause was
determined to be the removal of a bound device check in loop_flush()
by commit b5dd2f6047ca ("block: loop: improve performance via blk-mq").
Restoring this check, examining ->lo_state as set by loop_set_fd()
eliminates the bad behavior.
Test method:
modprobe loop max_loop=64
dd if=/dev/zero of=disk bs=512 count=200K
for((i=0;i<4;i++))do losetup -f disk; done
mkfs.ext4 -F /dev/loop0
for((i=0;i<4;i++))do mkdir t$i; mount /dev/loop$i t$i;done
for f in `ls /dev/loop[0-9]*|sort`; do \
echo $f; dd if=$f of=/dev/null bs=512 count=1; \
done
Test output: stock patched
/dev/loop0 18.1217e-05 8.3842e-05
/dev/loop1 6.1114e-05 0.000147979
/dev/loop10 0.414701 0.000116564
/dev/loop11 0.7474 6.7942e-05
/dev/loop12 0.747986 8.9082e-05
/dev/loop13 0.746532 7.4799e-05
/dev/loop14 0.480041 9.3926e-05
/dev/loop15 1.26453 7.2522e-05
Note that from loop10 onward, the device is not mounted, yet the
stock kernel consumes several orders of magnitude more wall time
than it does for a mounted device.
(Thanks for Mike Galbraith <efault@gmx.de>, give a changelog review.)
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: James Wang <jnwang@suse.com>
Fixes: b5dd2f6047ca ("block: loop: improve performance via blk-mq")
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Fix error path if we can't copy user structure on CXL_IOCTL_START_WORK
ioctl. We shouldn't unlock the context status mutex as it was not
locked (yet).
Fixes: 0712dc7e73e5 ("cxl: Fix issues when unmapping contexts")
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
It's possible that get_random_{u32,u64} is used before the crng has
initialized, in which case, its output might not be cryptographically
secure. For this problem, directly, this patch set is introducing the
*_wait variety of functions, but even with that, there's a subtle issue:
what happens to our batched entropy that was generated before
initialization. Prior to this commit, it'd stick around, supplying bad
numbers. After this commit, we force the entropy to be re-extracted
after each phase of the crng has initialized.
In order to avoid a race condition with the position counter, we
introduce a simple rwlock for this invalidation. Since it's only during
this awkward transition period, after things are all set up, we stop
using it, so that it doesn't have an impact on performance.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org # v4.11+
|
|
Linus pointed out that there is a much more efficient way of avoiding
the problem that we were trying to address in commit 9dfa7bba35ac0:
"fix race in drivers/char/random.c:get_reg()".
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The Lifebook E546 and E557 touchpad were also not functioning and
worked after running:
echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled
Add them to the list of machines that need this workaround.
Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Reviewed-by: Arjan Opmeer <arjan@opmeer.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
While introducing HDMI support, component matching on connectors node
were bypassed since no driver would actually bind on the DT node.
But when only a CVBS connector is present, only a single node is found
in the graph, but ignored and a NULL match table is given to the
component code.
This code permits bypassing the components framework by binding directly
the DRM driver when no components needs to be loaded.
Fixes: a41e82e6c457 ("drm/meson: Add support for components")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1496067352-8733-1-git-send-email-narmstrong@baylibre.com
|
|
The clipped src coordinates have already been rotated by 270 degrees for
when the plane rotation is 90/270 degrees, hence the FBC code should no
longer swap the width and height.
Cc: stable@vger.kernel.org
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170331180056.14086-4-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 73714c05df97d7527e7eaaa771472ef2ede46fa3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Restore the lost has_fbc flag for mobile ILK.
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: a13233804686 ("drm/i915: Introduce GEN5_FEATURES for device info")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170606133229.12439-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit c2d1a0ced2603c4a17fa9c53c37e415905cf5a6d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The scanline counter is bonkers on VLV/CHV DSI. The scanline counter
increment is not lined up with the start of vblank like it is on
every other platform and output type. This causes problems for
both the vblank timestamping and atomic update vblank evasion.
On my FFRD8 machine at least, the scanline counter increment
happens about 1/3 of a scanline ahead of the start of vblank (which
is where all register latching happens still). That means we can't
trust the scanline counter to tell us whether we're in vblank or not
while we're on that particular line. In order to keep vblank
timestamping in working condition when called from the vblank irq,
we'll leave scanline_offset at one, which means that the entire
line containing the start of vblank is considered to be inside
the vblank.
For the vblank evasion we'll need to consider that entire line
to be bad, since we can't tell whether the registers already
got latched or not. And we can't actually use the start of vblank
interrupt to get us past that line as the interrupt would fire
too soon, and then we'd up waiting for the next start of vblank
instead. One way around that would using the frame start
interrupt instead since that wouldn't fire until the next
scanline, but that would require some bigger changes in the
interrupt code. So for simplicity we'll just poll until we get
past the bad line.
v2: Adjust the comments a bit
Cc: stable@vger.kernel.org
Cc: Jonas Aaberg <cja@gmx.net>
Tested-by: Jonas Aaberg <cja@gmx.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.com
Tested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit ec1b4ee2834e66884e5b0d3d465f347ff212e372)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The assertion that we want to make before disabling the pin of the pages
for the unknown swizzling quirk is that the quirk is indeed active, and
that the quirk is disabled before we do apply it to the pages.
Fixes: 2c3a3f44dc13 ("drm/i915: Fix pages pin counting around swizzle quirk")
Fixes: 957870f93412 ("drm/i915: Split out i915_gem_object_set_tiling()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170521124014.27678-1-chris@chris-wilson.co.uk
Reviewed-bhy: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 20bb377106af69d16269b1837e9a945b9f508a2e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Commit 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon
insertion") added the restoration of the invalidation routine after the
GuC was disabled, but missed that the GuC was unconditionally disabled
when not used. This then overwrites the invalidate routine for the older
chipsets, causing havoc and breaking resume as the most obvious victim.
We place the guard inside i915_ggtt_disable_guc() to be backport
friendly (the bug was introduced into v4.11) but it would be preferred
to be in more control over when this was guard (i.e. do not try and
teardown the data structures before we have enabled them). That should
be true with the reorganisation of the guc loaders.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon insertion")
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Link: http://patchwork.freedesktop.org/patch/msgid/20170531190514.3691-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
(cherry picked from commit cb60606d835ca8b2f744835116bcabe64ce88849)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
On some systems there can be a race condition in which no crtc state is
added to the first atomic commit. This results in all crtc's having a
null DDB allocation, causing a FIFO underrun on any update until the
first modeset.
Changes since v1:
- Do not take the connection_mutex, this is already done below.
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Inspired-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 98d39494d375 ("drm/i915/gen9: Compute DDB allocation at atomic
check time (v4)")
Cc: <stable@vger.kernel.org> # v4.8+
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170531154236.27180-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 367d73d2806085bb507ab44c1f532640917fd5ca)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Since
commit bac2a909a096c9110525c18cbb8ce73c660d5f71
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Wed Jan 21 02:17:42 2015 +0100
PCI / PM: Avoid resuming PCI devices during system suspend
PCI devices will default to allowing the system suspend complete
optimization where devices are not woken up during system suspend if
they were already runtime suspended. This however breaks the i915/HDA
drivers for two reasons:
- The i915 driver has system suspend specific steps that it needs to
run, that bring the device to a different state than its runtime
suspended state.
- The HDA driver's suspend handler requires power that it will request
from the i915 driver's power domain handler. This in turn requires the
i915 driver to runtime resume itself, but this won't be possible if the
suspend complete optimization is in effect: in this case the i915
runtime PM is disabled and trying to get an RPM reference returns
-EACCESS.
Solve this by requiring the PCI/PM core to resume the device during
system suspend which in effect disables the suspend complete optimization.
Regardless of the above commit the optimization stayed disabled for DRM
devices until
commit d14d2a8453d650bea32a1c5271af1458cd283a0f
Author: Lukas Wunner <lukas@wunner.de>
Date: Wed Jun 8 12:49:29 2016 +0200
drm: Remove dev_pm_ops from drm_class
so this patch is in practice a fix for this commit. Another reason for
the bug staying hidden for so long is that the optimization for a device
is disabled if it's disabled for any of its children devices. i915 may
have a backlight device as its child which doesn't support runtime PM
and so doesn't allow the optimization either. So if this backlight
device got registered the bug stayed hidden.
Credits to Marta, Tomi and David who enabled pstore logging,
that caught one instance of this issue across a suspend/
resume-to-ram and Ville who rememberd that the optimization was enabled
for some devices at one point.
The first WARN triggered by the problem:
[ 6250.746445] WARNING: CPU: 2 PID: 17384 at drivers/gpu/drm/i915/intel_runtime_pm.c:2846 intel_runtime_pm_get+0x6b/0xd0 [i915]
[ 6250.746448] pm_runtime_get_sync() failed: -13
[ 6250.746451] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul
snd_hda_codec_realtek snd_hda_codec_generic ghash_clmulni_intel e1000e snd_hda_codec snd_hwdep snd_hda_core ptp mei_me pps_core snd_pcm lpc_ich mei prime_
numbers i2c_hid i2c_designware_platform i2c_designware_core [last unloaded: i915]
[ 6250.746512] CPU: 2 PID: 17384 Comm: kworker/u8:0 Tainted: G U W 4.11.0-rc5-CI-CI_DRM_334+ #1
[ 6250.746515] Hardware name: /NUC5i5RYB, BIOS RYBDWi35.86A.0362.2017.0118.0940 01/18/2017
[ 6250.746521] Workqueue: events_unbound async_run_entry_fn
[ 6250.746525] Call Trace:
[ 6250.746530] dump_stack+0x67/0x92
[ 6250.746536] __warn+0xc6/0xe0
[ 6250.746542] ? pci_restore_standard_config+0x40/0x40
[ 6250.746546] warn_slowpath_fmt+0x46/0x50
[ 6250.746553] ? __pm_runtime_resume+0x56/0x80
[ 6250.746584] intel_runtime_pm_get+0x6b/0xd0 [i915]
[ 6250.746610] intel_display_power_get+0x1b/0x40 [i915]
[ 6250.746646] i915_audio_component_get_power+0x15/0x20 [i915]
[ 6250.746654] snd_hdac_display_power+0xc8/0x110 [snd_hda_core]
[ 6250.746661] azx_runtime_resume+0x218/0x280 [snd_hda_intel]
[ 6250.746667] pci_pm_runtime_resume+0x76/0xa0
[ 6250.746672] __rpm_callback+0xb4/0x1f0
[ 6250.746677] ? pci_restore_standard_config+0x40/0x40
[ 6250.746682] rpm_callback+0x1f/0x80
[ 6250.746686] ? pci_restore_standard_config+0x40/0x40
[ 6250.746690] rpm_resume+0x4ba/0x740
[ 6250.746698] __pm_runtime_resume+0x49/0x80
[ 6250.746703] pci_pm_suspend+0x57/0x140
[ 6250.746709] dpm_run_callback+0x6f/0x330
[ 6250.746713] ? pci_pm_freeze+0xe0/0xe0
[ 6250.746718] __device_suspend+0xf9/0x370
[ 6250.746724] ? dpm_watchdog_set+0x60/0x60
[ 6250.746730] async_suspend+0x1a/0x90
[ 6250.746735] async_run_entry_fn+0x34/0x160
[ 6250.746741] process_one_work+0x1f2/0x6d0
[ 6250.746749] worker_thread+0x49/0x4a0
[ 6250.746755] kthread+0x107/0x140
[ 6250.746759] ? process_one_work+0x6d0/0x6d0
[ 6250.746763] ? kthread_create_on_node+0x40/0x40
[ 6250.746768] ret_from_fork+0x2e/0x40
[ 6250.746778] ---[ end trace 102a62fd2160f5e6 ]---
v2:
- Use the new pci_dev->needs_resume flag, to avoid any overhead during
the ->pm_prepare hook. (Rafael)
v3:
- Update commit message to reference the actual regressing commit.
(Lukas)
v4:
- Rebase on v4 of patch 1/2.
Fixes: d14d2a8453d6 ("drm: Remove dev_pm_ops from drm_class")
References: https://bugs.freedesktop.org/show_bug.cgi?id=100378
References: https://bugs.freedesktop.org/show_bug.cgi?id=100770
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: linux-pci@vger.kernel.org
Cc: <stable@vger.kernel.org> # v4.10.x: 4d071c3 - PCI/PM: Add needs_resume flag
Cc: <stable@vger.kernel.org> # v4.10.x
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Marta Lofstedt <marta.lofstedt@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1493726649-32094-2-git-send-email-imre.deak@intel.com
(cherry picked from commit adfdf85d795f4d4f487b61ee0b169d64c6e19081)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
psr1 is also disabled for panel resolution greater than 32X20.
Added psr2 check to disable only for psr2 panels having resolution
greater than 32X20.
issue was introduced by
commit-id : "acf45d11050abd751dcec986ab121cb2367dcbba"
commit message: "PSR2 is restricted to work with panel resolutions
upto 3200x2000, move the check to intel_psr_match_conditions and fully
block psr."
v2: (Rodrigo)
Add previous commit details which introduced the issue
Fixes: acf45d11050a ("drm/i915/psr: disable psr2 for resolution greater than 32X20")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Yaroslav Shabalin <yaroslav.shabalin@gmail.com>
Reported-by: Yaroslav Shabalin <yaroslav.shabalin@gmail.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/49935bdff896ee3140bed471012b9f9110a863a4.1495729964.git.vathsala.nagaraju@intel.com
(cherry picked from commit bef8c056fba09aa4629fe5a2d3efe64068d049db)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Allow intel_engine_is_idle() to be called outside of the GT wakeref by
acquiring the device runtime pm for ourselves. This allows the function
to act as check after we assume the engine is idle and we release the GT
wakeref held whilst we have requests. At the moment, we do not call it
outside of an awake context but taking the wakeref as required makes it
more convenient to use for quick debugging in future.
[ 2613.401647] RPM wakelock ref not held during HW access
[ 2613.401684] ------------[ cut here ]------------
[ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915]
[ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1
[ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016
[ 2613.401840] task: ffff880409e3a740 task.stack: ffffc900084dc000
[ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401863] RSP: 0018:ffffc900084dfce8 EFLAGS: 00010292
[ 2613.401869] RAX: 000000000000002a RBX: ffff8804016a8000 RCX: 0000000000000006
[ 2613.401871] RDX: 0000000000000006 RSI: ffffffff81cbf2d9 RDI: ffffffff81c9e3a7
[ 2613.401874] RBP: ffffc900084dfd18 R08: ffff880409e3afc8 R09: 0000000000000000
[ 2613.401877] R10: 000000008a1c483f R11: 0000000000000000 R12: 000000000000209c
[ 2613.401879] R13: 0000000000000001 R14: ffff8804016a8000 R15: ffff8804016ac150
[ 2613.401882] FS: 00007f39ef3dd8c0(0000) GS:ffff88041fb40000(0000) knlGS:0000000000000000
[ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2613.401887] CR2: 00000000023717c8 CR3: 00000002e7b34000 CR4: 00000000001406e0
[ 2613.401889] Call Trace:
[ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915]
[ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915]
[ 2613.401951] fault_irq_set+0x40/0x90 [i915]
[ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915]
[ 2613.401976] simple_attr_write+0xc7/0xe0
[ 2613.401981] full_proxy_write+0x4f/0x70
[ 2613.401987] __vfs_write+0x23/0x120
[ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80
[ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50
[ 2613.401999] ? __sb_start_write+0xfa/0x1f0
[ 2613.402004] vfs_write+0xc5/0x1d0
[ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0
[ 2613.402013] SyS_write+0x44/0xb0
[ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 2613.402022] RIP: 0033:0x7f39eded6670
[ 2613.402025] RSP: 002b:00007fffdcdcb1a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2613.402030] RAX: ffffffffffffffda RBX: ffffffff81470203 RCX: 00007f39eded6670
[ 2613.402033] RDX: 0000000000000001 RSI: 000000000041bc33 RDI: 0000000000000006
[ 2613.402036] RBP: ffffc900084dff88 R08: 00007f39ef3dd8c0 R09: 0000000000000001
[ 2613.402038] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000041bc33
[ 2613.402041] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000
[ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20
[ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48
[ 2613.402199] ---[ end trace 31f0cfa93ab632bf ]---
Fixes: 5400367a864d ("drm/i915: Ensure the engine is idle before manually changing HWS")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit a091d4ee931b16ce4fef945d39a20b851a7e17b7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
If the device is asleep (no GT wakeref), we know the GPU is already idle.
If we add an early return, we can avoid touching registers and checking
hw state outside of the assumed GT wakelock. This prevents causing such
errors whilst debugging:
[ 2613.401647] RPM wakelock ref not held during HW access
[ 2613.401684] ------------[ cut here ]------------
[ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915]
[ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1
[ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016
[ 2613.401840] task: ffff880409e3a740 task.stack: ffffc900084dc000
[ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401863] RSP: 0018:ffffc900084dfce8 EFLAGS: 00010292
[ 2613.401869] RAX: 000000000000002a RBX: ffff8804016a8000 RCX: 0000000000000006
[ 2613.401871] RDX: 0000000000000006 RSI: ffffffff81cbf2d9 RDI: ffffffff81c9e3a7
[ 2613.401874] RBP: ffffc900084dfd18 R08: ffff880409e3afc8 R09: 0000000000000000
[ 2613.401877] R10: 000000008a1c483f R11: 0000000000000000 R12: 000000000000209c
[ 2613.401879] R13: 0000000000000001 R14: ffff8804016a8000 R15: ffff8804016ac150
[ 2613.401882] FS: 00007f39ef3dd8c0(0000) GS:ffff88041fb40000(0000) knlGS:0000000000000000
[ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2613.401887] CR2: 00000000023717c8 CR3: 00000002e7b34000 CR4: 00000000001406e0
[ 2613.401889] Call Trace:
[ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915]
[ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915]
[ 2613.401951] fault_irq_set+0x40/0x90 [i915]
[ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915]
[ 2613.401976] simple_attr_write+0xc7/0xe0
[ 2613.401981] full_proxy_write+0x4f/0x70
[ 2613.401987] __vfs_write+0x23/0x120
[ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80
[ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50
[ 2613.401999] ? __sb_start_write+0xfa/0x1f0
[ 2613.402004] vfs_write+0xc5/0x1d0
[ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0
[ 2613.402013] SyS_write+0x44/0xb0
[ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 2613.402022] RIP: 0033:0x7f39eded6670
[ 2613.402025] RSP: 002b:00007fffdcdcb1a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2613.402030] RAX: ffffffffffffffda RBX: ffffffff81470203 RCX: 00007f39eded6670
[ 2613.402033] RDX: 0000000000000001 RSI: 000000000041bc33 RDI: 0000000000000006
[ 2613.402036] RBP: ffffc900084dff88 R08: 00007f39ef3dd8c0 R09: 0000000000000001
[ 2613.402038] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000041bc33
[ 2613.402041] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000
[ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20
[ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48
[ 2613.402199] ---[ end trace 31f0cfa93ab632bf ]---
Fixes: 25112b64b3d2 ("drm/i915: Wait for all engines to be idle as part of i915_gem_wait_for_idle()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 863e9fde1a7061dad09bb299c65bed5f1ccb44ff)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The decoupled MMIO feature doesn't work as intended by HW team. Enabling
it with forcewake will only make debugging efforts more difficult, so
let's disable it.
Fixes: 85ee17ebeedd ("drm/i915/bxt: Broxton decoupled MMIO")
Cc: Zhe Wang <zhe1.wang@intel.com>
Cc: Praveen Paneri <praveen.paneri@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Kai Chen <kai.chen@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170523215812.18328-2-kai.chen@intel.com
(cherry picked from commit 0051c10acabb631cfd439eae73289e6e4c39b2b7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This member was dropped long time ago.
Fixes: 774439e1 ("drm/i915/guc: re-optimise i915_guc_client layout")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 4afc67be8e203ee8f5e95e829c0777eae7a14702)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
While the atomic modesetting capability is signaled also elsewhere, also
reflect it by a driver minor bump.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
|
