summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-05-26nfp: support port splitting via devlinkJakub Kicinski4-7/+136
Add support for configuring port split with devlink. Add devlink callbacks to validate requested config and call NSP helpers. Getting the right nfp_port structure can be done with simple iteration. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26nfp: calculate total port lanes for splitJakub Kicinski2-5/+9
For port splitting we will need to know the total number of lanes in a port. Calculate that based on eth_table information. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26nfp: register ports as devlink portsJakub Kicinski3-0/+66
Extend nfp_port to contain devlink_port structures. Register the ports to allow users inspecting device ports. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26nfp: add helper for cleaning up vNICsJakub Kicinski1-12/+11
We will soon have to invoke more clean up for vNICs. Move the cleanup callbacks into a helper. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26nfp: add devlink supportSimon Horman5-5/+63
Add initial devlink support. This patch simply switches allocation of per-adapter structure to devlink's priv and register devlink with empty ops table. See following patches for implementation of particular ops. We should now clear the app pointer on exit, this is how devlink callbacks will know app is not initialized. Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26nfp: move mutex init out of net codeJakub Kicinski2-1/+4
Move mutex init to main file close to structure allocation. This will allow mutex to be taken before net code runs (e.g. from devlink callbacks). While at it remember to destroy the mutex. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26mlxsw: spectrum_router: Adjust RIF configuration for new firmware versionsIdo Schimmel1-0/+22
In new firmware versions, when configuring a {Port, VID} as a router interface, the driver is responsible for enabling the STP filter and disabling learning. Otherwise, packets are discarded. This change doesn't break existing firmware versions, but is required for newer firmware versions. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26mlxsw: spectrum: Validate firmware revision on initYotam Gigi2-0/+68
Make the spectrum module check the current device firmware version, and if it is below the supported version, use the libfirmware API to request a firmware file with the supported firmware version and flash it to the device using the mlxfw module. The firmware file names are expected to be of Mellanox Firmware Archive version 2 (MFA2) format and their name are expected to be in the following pattern: "mlxsw_spectrum-<major>.<minor>.<sub-minor>.mfa2". Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26mlxsw: core: Create the mlxsw_fw_rev structYotam Gigi1-5/+7
This struct was previously an anonymous struct defined inside the mlxsw_bus_info struct. Extract it to a struct named mlxsw_fw_rev, as it will be needed later by the spectrum driver. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26mlxsw: spectrum: Add the needed callbacks for mlxfw integrationYotam Gigi1-0/+166
The mlxfw module defines several needed callbacks in order to flash the device's firmware. As the mlxfw module is shared between several different drivers, those callbacks are the glue functionality that is responsible for hardware interaction. Add those callbacks using the MCQI, MCC, MCDA registers. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26mlxsw: reg: Add Management Component Data Access registerYotam Gigi1-0/+52
The MCDA register allows reading and writing a firmware component. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26mlxsw: reg: Add Management Component Control registerYotam Gigi1-0/+83
The MCC register allows controlling and querying the firmware flash state machine (FSM). Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26mlxsw: reg: Add Management Component Query Information registerYotam Gigi1-0/+84
The MCQI register queries information about firmware components. It will be needed by the mlxfw module to query various options about the components, such as their max size, alignment and max write size. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26Add the mlxfw module for Mellanox firmware flash processYotam Gigi13-0/+1529
The mlxfw module is in charge of common logic needed to flash Mellanox devices firmware, which consists of: - Parse the Mellanox Firmware Archive version 2 (MFA2) format, which is the format used to store the Mellanox firmware. The MFA2 format file can hold firmware for many different silicon variants, differentiated by a unique ID called PSID. In addition, the MFA2 file data section is compressed using xz compression to save both file-system space and memory at extraction time. - Implement the firmware flash state machine logic, which is a common logic for Mellanox products needed to flash the firmware to the device. As the module is shared between different Mellanox products, it defines a set of callbacks to be implemented by the specific driver for hardware interaction. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25be2net: Update the driver version to 11.4.0.0Suresh Reddy1-1/+1
Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25be2net: Fix UE detection logic for BE3Suresh Reddy2-8/+22
On certain platforms BE3 chips may indicate spurious UEs (unrecoverable error). Because of the UE detection logic was disabled in the driver for BE3 chips. Because of this, even in cases of a real UE, a failover will not occur. This patch re-enables UE detection on BE3 and if a UE is detected, reads the POST register. If the POST register, reports either a FAT_LOG_STATE or a ARMFW_UE, then it means that a valid UE occurred in the chip. Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25net-next: stmmac: rework the speed selectionLABBE Corentin5-44/+43
The current stmmac_adjust_link() part which handle speed have some if (has_platform) code and my dwmac-sun8i will add more of them. So we need to handle better speed selection. Moreover the struct link member speed and port are hard to guess their purpose. And their unique usage are to be combined for writing speed. So this patch replace speed/port by simpler speed10/speed100/speed1000/speed_mask variables. In dwmac4_core_init and dwmac1000_core_init, port/speed value was used directly without using the struct link. This patch convert also their usage to speedxxx. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25net-next: stmmac: Convert old_link to boolLABBE Corentin2-5/+5
This patch convert old_link from int to bool since it store only 1 or 0 Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25net-next: stmmac: use SPEED_xxx instead of raw valueLABBE Corentin1-3/+3
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25net-next: stmmac: Remove unnecessary parenthesisLABBE Corentin1-1/+1
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25net-next: stmmac: Convert new_state to boolLABBE Corentin1-5/+5
This patch convert new_state from int to bool since it store only 1 or 0 Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25net: jme: Remove unused functionsMatthias Kaehlcke1-42/+0
The functions jme_restart_tx_engine(), jme_pause_rx() and jme_resume_rx() are not used. Removing them fixes the following warnings when building with clang: drivers/net/ethernet/jme.c:694:1: error: unused function 'jme_restart_tx_engine' [-Werror,-Wunused-function] drivers/net/ethernet/jme.c:2393:20: error: unused function 'jme_pause_rx' [-Werror,-Wunused-function] drivers/net/ethernet/jme.c:2406:20: error: unused function 'jme_resume_rx' [-Werror,-Wunused-function] Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25Merge branch 'for-upstream' of ↵David S. Miller8-15/+49
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-05-23 Here's the first Bluetooth & 802.15.4 pull request targeting the 4.13 kernel release. - Bluetooth 5.0 improvements (Data Length Extensions and alternate PHY) - Support for new Intel Bluetooth adapter [[8087:0aaa] - Various fixes to ieee802154 code - Various fixes to HCI UART code ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25net: phy: put genphy_config_init's EXPORT_SYMBOL directly after the functionUwe Kleine-König1-1/+1
Commit af6b6967d6e1 ("net: phy: export genphy_config_init()") introduced this EXPORT_SYMBOL and put it after gen10g_soft_reset() instead of directly after genphy_config_init. Probably this happend when the patch was applied because http://patchwork.ozlabs.org/patch/339622/ looks ok. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25Merge tag 'mlx5-update-2017-05-23' of ↵David S. Miller35-157/+604
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== mlx5-update-2017-05-23 First patch from Leon, came to remove the redundant usage of mlx5_vzalloc, and directly use kvzalloc across all mlx5 drivers. 2nd patch from Noa, adds new device IDs into the supported devices list. 3rd and 4th patches from Ilan are adding the basic infrastructure and support for Mellanox's mlx5 FPGA. Last two patches from Tariq came to modify the outdated driver version reported in ethtool and in mlx5_ib to more reflect the current driver state and remove the redundant date string reported in the version. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24mlxsw: spectrum_flower: Add support for tcp flagsJiri Pirko2-0/+30
Allow to offload rules that contain tcp flags within the mask. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24mlxsw: spectrum: Add acl block containing tcp flags for ipv4Jiri Pirko1-0/+6
Add acl block called "ipv4" which contains tcp flags. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24mlxsw: acl: Add tcp flags acl elementJiri Pirko2-0/+3
Define new element for tcp flags and place it into scratch area. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: Replace set_id() api with set_name()Mintz, Yuval5-11/+7
Current API between qed and protocol modules allows passing an additional private string - but it doesn't get utilized by qed anywhere. Clarify the API by removing it and renaming it 'set_name'. CC: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qede: Log probe of PCI deviceMintz, Yuval1-2/+38
Replace meaningless logged print ('Ending successfully qede probe') with a single-liner containing interesting information about probed device. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: Provide MBI information in dev_infoTomer Tayar4-0/+51
Pass additional information about package installed on persistent memory so that protocol drivers would be able to log it. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: Enable RoCE parser searching on fp initMichal Kalderon1-0/+7
Since we're closing the parser searching for RDMA when stoping the fastpath, we need to re-enable it when starting the fastpath once again. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: Flush slowpath tasklet on stopTomer Tayar1-0/+14
Today, driver has a synchronization point while closing the device which synchronizes its slowpath interrupt line. However, that's insufficient as that ISR would schedule the slowpath-tasklet - so even after ISR is over it's possible the handling of the interrupt has not completed. By doing a disable/enable on the taskelt we guarantee that all HW events that should no longer be genereated from that point onward in the flow are truly behind us. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: Remove BB_A0 referencesMintz, Yuval2-12/+0
A0 never went public, so no need to protect against it. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: Drop the 's' from num_ports_in_enginesTomer Tayar4-22/+22
The parameter reflects the number of physical ports connected to a single engine, not all. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: Log incorrectly installed boardTomer Tayar2-0/+7
In case nvram layout of board is incorrect, board may exhibit peculiar oddities. Log such a rare event. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: !main_ptt for tunnel configurationManish Chopra5-9/+30
Flows configuring tunnel ports in HW use the main_ptt which should be reserved for core-functionality. Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qede: Fix sparse warningsManish Chopra4-18/+22
Solves the following warning in qede - - Several cases of missing cpu_to_le16() conversions - Adds 'static' to one function declaration - Removes dcbnl operation that's currently getting populated twice Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-23net: ieee802154: fix potential null pointer dereferenceGustavo A. R. Silva1-1/+2
Null check at line 918: if (!spi) {, implies spi might be NULL. Function spi_get_drvdata() dereference pointer spi. Move pointer priv assignment after the null check. Addresses-Coverity-ID: 1408888 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-05-23Bluetooth: btintel: Add MODULE_FIRMWARE entries for iBT 3.5 controllersJürg Billeter1-0/+2
The iBT 3.5 controllers (Intel 8265, Windstorm Peak) need intel/ibt-12-16.sfi and intel/ibt-12-16.ddc firmware files from linux-firmware repository. Signed-off-by: Jürg Billeter <j@bitron.ch> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-05-23enic: unmask intr only when napi is completeGovindarajulu Varadarajan1-4/+2
In case of busy poll, napi_complete_done returns false and does not dequeue napi. In this case do not unmask the intr. We are guaranteed napi is called again. This reduces unnecessary iowrites. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-23Bluetooth: btwilink: Fix unexpected skb freeLoic Poulain1-1/+0
The caller (hci_core) still owns the skb in case of error, releasing it inside the send function can lead to use-after-free errors. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-05-23Bluetooth: hci_ll: Fix download_firmware() return when __hci_cmd_sync failsGuodong Xu1-0/+1
When __hci_cmd_sync() fails, download_firmware() should also fail, and the same error value should be returned as PTR_ERR(skb). Without this fix, download_firmware() will return a success when it actually failed in __hci_cmd_sync(). Fixes: 371805522f87 ("bluetooth: hci_uart: add LL protocol serdev driver support") Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller123-463/+783
2017-05-23Merge tag 'pstore-v4.12-rc3' of ↵Linus Torvalds1-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore fix from Kees Cook: "Marta noticed another misbehavior in EFI pstore, which this fixes. Hopefully this is the last of the v4.12 fixes for pstore!" * tag 'pstore-v4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: efi-pstore: Fix write/erase id tracking
2017-05-23Merge tag 'acpi-4.12-rc3' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert a 4.11 change that turned out to be problematic and add a .gitignore file. Specifics: - Revert a 4.11 commit related to the ACPI-based handling of laptop lids that made changes incompatible with existing user space stacks and broke things there (Lv Zheng). - Add .gitignore to the ACPI tools directory (Prarit Bhargava)" * tag 'acpi-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / button: Remove lid_init_state=method mode" tools/power/acpi: Add .gitignore file
2017-05-23Merge tag 'pm-4.12-rc3' of ↵Linus Torvalds5-8/+17
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix RTC wakeup from suspend-to-idle broken recently, fix CPU idleness detection condition in the schedutil cpufreq governor, fix a cpufreq driver build failure, fix an error code path in the power capping framework, clean up the hibernate core and update the intel_pstate documentation. Specifics: - Fix RTC wakeup from suspend-to-idle broken by the recent rework of ACPI wakeup handling (Rafael Wysocki). - Update intel_pstate driver documentation to reflect the current code and explain how it works in more detail (Rafael Wysocki). - Fix an issue related to CPU idleness detection on systems with shared cpufreq policies in the schedutil governor (Juri Lelli). - Fix a possible build issue in the dbx500 cpufreq driver (Arnd Bergmann). - Fix a function in the power capping framework core to return an error code instead of 0 when there's an error (Dan Carpenter). - Clean up variable definition in the hibernation core (Pushkar Jambhlekar)" * tag 'pm-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: dbx500: add a Kconfig symbol PM / hibernate: Declare variables as static PowerCap: Fix an error code in powercap_register_zone() RTC: rtc-cmos: Fix wakeup from suspend-to-idle PM / wakeup: Fix up wakeup_source_report_event() cpufreq: intel_pstate: Document the current behavior and user interface cpufreq: schedutil: use now as reference when aggregating shared policy requests
2017-05-23i2c: designware: Fix bogus sda_hold_time due to uninitialized varsJan Kiszka1-1/+1
We need to initializes those variables to 0 for platforms that do not provide ACPI parameters. Otherwise, we set sda_hold_time to random values, breaking e.g. Galileo and IOT2000 boards. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Fixes: 9d6408433019 ("i2c: designware: don't infer timings described by ACPI from clock rate") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-23efi-pstore: Fix write/erase id trackingKees Cook1-6/+11
Prior to the pstore interface refactoring, the "id" generated during a backend pstore_write() was only retained by the internal pstore inode tracking list. Additionally the "part" was ignored, so EFI would encode this in the id. This corrects the misunderstandings and correctly sets "id" during pstore_write(), and uses "part" directly during pstore_erase(). Reported-by: Marta Lofstedt <marta.lofstedt@intel.com> Fixes: 76cc9580e3fb ("pstore: Replace arguments for write() API") Fixes: a61072aae693 ("pstore: Replace arguments for erase() API") Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Marta Lofstedt <marta.lofstedt@intel.com>
2017-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds4-11/+17
Pull networking fixes from David Miller: "Mostly netfilter bug fixes in here, but we have some bits elsewhere as well. 1) Don't do SNAT replies for non-NATed connections in IPVS, from Julian Anastasov. 2) Don't delete conntrack helpers while they are still in use, from Liping Zhang. 3) Fix zero padding in xtables's xt_data_to_user(), from Willem de Bruijn. 4) Add proper RCU protection to nf_tables_dump_set() because we cannot guarantee that we hold the NFNL_SUBSYS_NFTABLES lock. From Liping Zhang. 5) Initialize rcv_mss in tcp_disconnect(), from Wei Wang. 6) smsc95xx devices can't handle IPV6 checksums fully, so don't advertise support for offloading them. From Nisar Sayed. 7) Fix out-of-bounds access in __ip6_append_data(), from Eric Dumazet. 8) Make atl2_probe() propagate the error code properly on failures, from Alexey Khoroshilov. 9) arp_target[] in bond_check_params() is used uninitialized. This got changes from a global static to a local variable, which is how this mistake happened. Fix from Jarod Wilson. 10) Fix fallout from unnecessary NULL check removal in cls_matchall, from Jiri Pirko. This is definitely brown paper bag territory..." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) net: sched: cls_matchall: fix null pointer dereference vsock: use new wait API for vsock_stream_sendmsg() bonding: fix randomly populated arp target array net: Make IP alignment calulations clearer. bonding: fix accounting of active ports in 3ad net: atheros: atl2: don't return zero on failure path in atl2_probe() ipv6: fix out of bound writes in __ip6_append_data() bridge: start hello_timer when enabling KERNEL_STP in br_stp_start smsc95xx: Support only IPv4 TCP/UDP csum offload arp: always override existing neigh entries with gratuitous ARP arp: postpone addr_type calculation to as late as possible arp: decompose is_garp logic into a separate function arp: fixed error in a comment tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0 netfilter: xtables: fix build failure from COMPAT_XT_ALIGN outside CONFIG_COMPAT ebtables: arpreply: Add the standard target sanity check netfilter: nf_tables: revisit chain/object refcounting from elements netfilter: nf_tables: missing sanitization in data from userspace netfilter: nf_tables: can't assume lock is acquired when dumping set elems netfilter: synproxy: fix conntrackd interaction ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-02 08:39:10 +0300