summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-09-06net: moxa: fix endianness-related issues from 'sparse'Sergei Antonov1-2/+2
Sparse checker found two endianness-related issues: .../moxart_ether.c:34:15: warning: incorrect type in assignment (different base types) .../moxart_ether.c:34:15: expected unsigned int [usertype] .../moxart_ether.c:34:15: got restricted __le32 [usertype] .../moxart_ether.c:39:16: warning: cast to restricted __le32 Fix them by using __le32 type instead of u32. Signed-off-by: Sergei Antonov <saproj@gmail.com> Link: https://lore.kernel.org/r/20220902125037.1480268-1-saproj@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-06net: ftmac100: fix endianness-related issues from 'sparse'Sergei Antonov1-6/+6
Sparse found a number of endianness-related issues of these kinds: .../ftmac100.c:192:32: warning: restricted __le32 degrades to integer .../ftmac100.c:208:23: warning: incorrect type in assignment (different base types) .../ftmac100.c:208:23: expected unsigned int rxdes0 .../ftmac100.c:208:23: got restricted __le32 [usertype] .../ftmac100.c:249:23: warning: invalid assignment: &= .../ftmac100.c:249:23: left side has type unsigned int .../ftmac100.c:249:23: right side has type restricted __le32 .../ftmac100.c:527:16: warning: cast to restricted __le32 Change type of some fields from 'unsigned int' to '__le32' to fix it. Signed-off-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220902113749.1408562-1-saproj@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-06net: lan966x: Extend lan966x with RGMII supportHoratiu Vultur2-0/+4
Extend lan966x with RGMII support. The MAC supports all RGMII_* modes. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220902111548.614525-1-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-05r8169: remove not needed net_ratelimit() checkHeiner Kallweit1-2/+1
We're not in a hot path and don't want to miss this message, therefore remove the net_ratelimit() check. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: phy: Add 1000BASE-KX interface modeSean Anderson2-0/+2
Add 1000BASE-KX interface mode. This 1G backplane ethernet as described in clause 70. Clause 73 autonegotiation is mandatory, and only full duplex operation is supported. Although at the PMA level this interface mode is identical to 1000BASE-X, it uses a different form of in-band autonegation. This justifies a separate interface mode, since the interface mode (along with the MLO_AN_* autonegotiation mode) sets the type of autonegotiation which will be used on a link. This results in more than just electrical differences between the link modes. With regard to 1000BASE-X, 1000BASE-KX holds a similar position to SGMII: same signaling, but different autonegotiation. PCS drivers (which typically handle in-band autonegotiation) may only support 1000BASE-X, and not 1000BASE-KX. Similarly, the phy mode is used to configure serdes phys with phy_set_mode_ext. Due to the different electrical standards (SFI or XFI vs Clause 70), they will likely want to use different configuration. Adding a phy interface mode for 1000BASE-KX helps simplify configuration in these areas. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: dpaa: Adjust queue depth on rate changeSean Anderson5-6/+44
Instead of setting the queue depth once during probe, adjust it on the fly whenever we configure the link. This is a bit unusal, since usually the DPAA driver calls into the FMAN driver, but here we do the opposite. We need to add a netdev to struct mac_device for this, but it will soon live in the phylink config. I haven't tested this extensively, but it doesn't seem to break anything. We could possibly optimize this a bit by keeping track of the last rate, but for now we just update every time. 10GEC probably doesn't need to call into this at all, but I've added it for consistency. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05soc: fsl: qbman: Add CGR update functionSean Anderson1-0/+48
This adds a function to update a CGR with new parameters. qman_create_cgr can almost be used for this (with flags=0), but it's not suitable because it also registers the callback function. The _safe variant was modeled off of qman_cgr_delete_safe. However, we handle multiple arguments and a return value. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05soc: fsl: qbman: Add helper for sanity checking cgr opsSean Anderson1-10/+19
This breaks out/combines get_affine_portal and the cgr sanity check in preparation for the next commit. No functional change intended. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: dpaa: Use mac_dev variable in dpaa_netdev_initSean Anderson1-4/+5
There are several references to mac_dev in dpaa_netdev_init. Make things a bit more concise by adding a local variable for it. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: fman: Change return type of disable to voidSean Anderson5-20/+9
When disabling, there is nothing we can do about errors. In fact, the only error which can occur is misuse of the API. Just warn in the mac driver instead. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: fman: Clean up error handlingSean Anderson1-28/+15
This removes the _return label, since something like err = -EFOO; goto _return; can be replaced by the briefer return -EFOO; Additionally, this skips going to _return_of_node_put when dev_node has already been put (preventing a double put). Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: fman: Specify type of mac_dev for exception_cbSean Anderson5-9/+10
Instead of using a void pointer for mac_dev, specify its type explicitly. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: fman: Use mac_dev for some paramsSean Anderson5-40/+22
Some params are already present in mac_dev. Use them directly instead of passing them through params. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: fman: Pass params directly to mac initSean Anderson8-49/+32
Instead of having the mac init functions call back into the fman core to get their params, just pass them directly to the init functions. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: fman: Map the base address onceSean Anderson4-27/+17
We don't need to remap the base address from the resource twice (once in mac_probe() and again in set_fman_mac_params()). We still need the resource to get the end address, but we can use a single function call to get both at once. While we're at it, use platform_get_mem_or_io and devm_request_resource to map the resource. I think this is the more "correct" way to do things here, since we use the pdev resource, instead of creating a new one. It's still a bit tricky, since we need to ensure that the resource is a child of the fman region when it gets requested. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: fman: Remove internal_phy_node from paramsSean Anderson3-35/+34
This member was used to pass the phy node between mac_probe and the mac-specific initialization function. But now that the phy node is gotten in the initialization function, this parameter does not serve a purpose. Remove it, and do the grabbing of the node/grabbing of the phy in the same place. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: fman: Inline several functions into initializationSean Anderson3-128/+21
There are several small functions which were only necessary because the initialization functions didn't have access to the mac private data. Now that they do, just do things directly. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: fman: Mark mac methods staticSean Anderson3-61/+72
These methods are no longer accessed outside of the driver file, so mark them as static. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: fman: Move initialization to mac-specific filesSean Anderson7-323/+277
This moves mac-specific initialization to mac-specific files. This will make it easier to work with individual macs. It will also make it easier to refactor the initialization to simplify the control flow. No functional change intended. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05r8169: remove useless PCI region size checkHeiner Kallweit1-6/+0
Let's trust the hardware here and remove this useless check. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: dsa: microchip: lan937x: add interrupt support for port phy linkArun Ramadoss6-4/+399
This patch enables the interrupts for internal phy link detection for LAN937x. The interrupt enable bits are active low. There is global interrupt mask for each port. And each port has the individual interrupt mask for TAS. QCI, SGMII, PTP, PHY and ACL. The first level of interrupt domain is registered for global port interrupt and second level of interrupt domain for the individual port interrupts. The phy interrupt is enabled in the lan937x_mdio_register function. Interrupt from which port is raised will be detected based on the interrupt host data. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: dsa: microchip: lan937x: clear the POR_READY_INT status bitArun Ramadoss1-0/+4
In the lan937x_reset_switch(), it masks all the switch and port registers. In the Global_Int_status register, POR ready bit is write 1 to clear bit and all other bits are read only. So, this patch clear the por_ready_int status bit by writing 1. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: dsa: microchip: add reference to ksz_device inside the ksz_portArun Ramadoss2-0/+7
struct ksz_port doesn't have reference to ksz_device as of now. In order to find out from which port interrupt has triggered, we need to pass the struct ksz_port as a host data. When the interrupt is triggered, we can get the port from which interrupt triggered, but to identify it is phy interrupt we have to read status register. The regmap structure for accessing the device register is present in the ksz_device struct. To access the ksz_device from the ksz_port, the reference is added to it with port number as well. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: ipa: verify a few more IDsAlex Elder1-3/+43
The completed transaction list is used in gsi_channel_trans_complete() to return the next transaction in completed state. Add some temporary checks to verify the transaction indicated by the completed ID matches the one first in this list. Similarly, we use the pending and completed transaction lists when cancelling pending transactions in gsi_channel_trans_cancel_pending(). Add temporary checks there to verify the transactions indicated by IDs match those tracked by these lists. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: ipa: further simplify gsi_channel_trans_last()Alex Elder1-28/+18
Do a little more refactoring in gsi_channel_trans_last() to simplify it further. The resulting code should behave exactly as before. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: ipa: simplify gsi_channel_trans_last()Alex Elder1-26/+7
Using a little logic we can simplify gsi_channel_trans_last(). The first condition in that function looks like this: if (trans_info->allocated_id != trans_info->free_id) And if that's false, we proceed to the next one: if (trans_info->committed_id != trans_info->allocated_id) Failure of the first test implies: trans_info->allocated_id == trans_info->free_id And therefore, the second one can be rewritten this way: if (trans_info->committed_id != trans_info->free_id) Substituting free_id for allocated_id and committed_id can also be done in the code blocks executed when these conditions yield true. The net result is that all three blocks for TX endpoints can be consolidated into just one. The two blocks of code at the end of that function (used for both TX and RX channels) can be similarly consolidated into a single block. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: ipa: use IDs exclusively for last transactionAlex Elder1-15/+27
Always use transaction IDs when finding the "last" transaction to await when quiescing a channel. This basically extends what was done in the previous patch to all other transaction state IDs. As a result we are no longer updating any transaction lists inside gsi_channel_trans_last(), so there's no need to take the spinlock. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: ipa: use IDs for last allocated transactionAlex Elder1-3/+9
Use the allocated and free transaction IDs to determine whether the "last" transaction used for quiescing a channel is in allocated state. The last allocated transaction that has not been committed (if any) immediately precedes the first free transaction in the transaction array. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: ipa: rework last transaction determinationAlex Elder3-36/+28
When quiescing a channel, we find the "last" transaction, which is the latest one to have been allocated. (New transaction allocation will have been prevented by the time this is called.) Currently we do this by looking for the first non-empty transaction list in each state, then return the last entry from that last. Instead, determine the last entry in each list (if any) and return that entry if found. Temporarily (locally) introduce list_last_entry_or_null() as a helper for this, mirroring list_first_entry_or_null(). This macro definition will be removed by an upcoming patch. Remove the temporary warnings added by the previous commit. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05r8169: use devm_clk_get_optional_enabled() to simplify the codeHeiner Kallweit1-34/+3
Now that we have devm_clk_get_optional_enabled(), we don't have to open-code it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05r8169: remove comment about apparently non-existing chip versionsHeiner Kallweit1-6/+0
It's not clear where these entries came from, and as I wrote in the comment: Not even Realtek's r8101 driver knows these chip id's. So remove the comment. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05r8169: merge handling of chip versions 12 and 17 (RTL8168B)Heiner Kallweit3-8/+1
It's not clear why XID's 380 and 381..387 ever got different chip version id's. VER_12 and VER_17 are handled exactly the same. Therefore merge handling under the VER_17 umbrella. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: altera: tse: convert to phylinkMaxime Chevallier4-314/+141
Convert the Altera Triple Speed Ethernet Controller to phylink. This controller supports MII, GMII and RGMII with its MAC, and SGMII + 1000BaseX through a small embedded PCS. The PCS itself has a register set very similar to what is found in a typical 802.3 ethernet PHY, but this register set memory-mapped instead of lying on an mdio bus. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: pcs: add new PCS driver for altera TSE PCSMaxime Chevallier3-0/+182
The Altera Triple Speed Ethernet has a SGMII/1000BaseC PCS that can be integrated in several ways. It can either be part of the TSE MAC's address space, accessed through 32 bits accesses on the mapped mdio device 0, or through a dedicated 16 bits register set. This driver allows using the TSE PCS outside of altera TSE's driver, since it can be used standalone by other MACs. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: altera: tse: cosmetic change to use reverse xmas tree orderingMaxime Chevallier2-22/+23
Make the driver code cleaner through a strictly cosmetic change, using he reverse xmas tree variable declaration ordering. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-04Merge tag 'wireless-next-2022-09-03' of ↵David S. Miller59-6795/+26250
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== drivers - rtw89: large update across the map, e.g. coex, pci(e), etc. - ath9k: uninit memory read fix - ath10k: small peer map fix and a WCN3990 device fix - wfx: underflow stack - the "change MAC address while IFF_UP" change from James we discussed - more MLO work, including a set of fixes for the previous code, now that we have more code we can exercise it more - prevent some features with MLO that aren't ready yet (AP_VLAN and 4-address connections) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03wifi: mac80211_hwsim: fix multi-channel handling in netlink RXJohannes Berg1-22/+4
In netlink RX, now that we can actually have multiple channel contexts for MLO, things don't work well as we only keep a single pointer, and then on link switching we might NULL it, and hit the return if the channel is NULL. However, we already use mac80211_hwsim_tx_iter() which deals with all this, so remove the test and adjust the remaining code a bit. This then means we no longer use the chanctx pointer, so remove it as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: warn on invalid link addressJohannes Berg1-0/+2
Catch the bugs fixed in mac80211 by the previous commits and warn if an invalid address is added (or removed). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: refactor RX a bitJohannes Berg1-11/+15
Refactor some common RX functionality between the netlink and non-netlink paths, adding the special hwsim TLV (if compiled) also in the netlink path. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: check STA magic in change_sta_linksJohannes Berg1-0/+2
Just as an additional check that mac80211 isn't doing anything strange, add a check of the STA magic (which gets assigned when the station is added, and cleared when the station is removed). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: remove multicast workaroundJohannes Berg1-6/+1
Now that we have proper multicast TX in mac80211, there's no longer a need to fake something here. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03net: fec: add stop mode support for imx8 platformWei Fang2-0/+39
The current driver support stop mode by calling machine api. The patch add dts support to set GPR register for stop request. imx8mq enter stop/exit stop mode by setting GPR bit, which can be accessed by A core. imx8qm enter stop/exit stop mode by calling IMX_SC ipc APIs that communicate with M core ipc service, and the M core set the related GPR bit at last. Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03r8152: Add MAC passthrough support for Lenovo Travel HubAndré Apitzsch1-0/+2
The Lenovo USB-C Travel Hub supports MAC passthrough. Signed-off-by: André Apitzsch <git@apitzsch.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03net: lantiq_etop: Fix return type for implementation of ndo_start_xmitGUO Zihua1-1/+1
Since Linux now supports CFI, it will be a good idea to fix mismatched return type for implementation of hooks. Otherwise this might get cought out by CFI and cause a panic. ltq_etop_tx() would return either NETDEV_TX_BUSY or NETDEV_TX_OK, so change the return type to netdev_tx_t directly. Signed-off-by: GUO Zihua <guozihua@huawei.com> Link: https://lore.kernel.org/r/20220902081521.59867-1-guozihua@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-03net: sunplus: Fix return type for implementation of ndo_start_xmitGUO Zihua1-1/+2
Since Linux now supports CFI, it will be a good idea to fix mismatched return type for implementation of hooks. Otherwise this might get cought out by CFI and cause a panic. spl2sw_ethernet_start_xmit() would return either NETDEV_TX_BUSY or NETDEV_TX_OK, so change the return type to netdev_tx_t directly. Signed-off-by: GUO Zihua <guozihua@huawei.com> Link: https://lore.kernel.org/r/20220902081550.60095-1-guozihua@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-03net: xscale: Fix return type for implementation of ndo_start_xmitGUO Zihua1-1/+1
Since Linux now supports CFI, it will be a good idea to fix mismatched return type for implementation of hooks. Otherwise this might get cought out by CFI and cause a panic. eth_xmit() would return either NETDEV_TX_BUSY or NETDEV_TX_OK, so change the return type to netdev_tx_t directly. Signed-off-by: GUO Zihua <guozihua@huawei.com> Link: https://lore.kernel.org/r/20220902081612.60405-1-guozihua@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-03net: broadcom: Fix return type for implementation ofGUO Zihua1-1/+1
Since Linux now supports CFI, it will be a good idea to fix mismatched return type for implementation of hooks. Otherwise this might get cought out by CFI and cause a panic. bcm4908_enet_start_xmit() would return either NETDEV_TX_BUSY or NETDEV_TX_OK, so change the return type to netdev_tx_t directly. Signed-off-by: GUO Zihua <guozihua@huawei.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220902075407.52358-1-guozihua@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-02net: ipa: track polled transactions with an IDAlex Elder2-16/+24
Add a transaction ID to track the first element in the transaction array that has been polled. Advance the ID when we are releasing a transaction. Temporarily add warnings that verify that the first polled transaction tracked by the ID matches the first element on the polled list, both when polling and freeing. Remove the temporary warnings added by the previous commit. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-02net: ipa: track completed transactions with an IDAlex Elder2-17/+24
Add a transaction ID field to track the first element in the transaction array that has completed but has not yet been polled. Advance the ID when we are processing a transaction in the NAPI polling loop (where completed transactions become polled). Temporarily add warnings that verify that the first completed transaction tracked by the ID matches the first element on the completed list, both when pending and completing. Remove the temporary warnings added by the previous commit. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-02net: ipa: track pending transactions with an IDAlex Elder2-18/+29
Add a transaction ID field to track the first element in the transaction array that is pending (sent to hardware) but not yet complete. Advance the ID when a completion event for a channel indicates that transactions have completed. Temporarily add warnings that verify that the first pending transaction tracked by the ID matches the first element on the pending list, both when pending and completing, as well as when resetting the channel. Remove the temporary warnings added by the previous commit. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-03 21:14:33 +0300