summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-07-28[media] em28xx: Add support for devices with a separate audio interfaceMauro Carvalho Chehab4-60/+109
Some devices use a separate interface for the vendor audio class. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] em28xx-audio: Some Alsa API fixesMauro Carvalho Chehab1-1/+6
Mark the alsa stream with SNDRV_PCM_INFO_BATCH, as the timing to get audio streams can vary. Also, add SNDRV_PCM_TRIGGER for pause/release. while here, fix the stop indicator, to be sure that audio will be properly released at the stop events. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] em28xx-audio: Properly report failures to start streamMauro Carvalho Chehab1-0/+3
If the audio stream fails for any reason, it should: 1) Report an error via dmesg; 2) Mark internally that the stream didn't started. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] em28xx-audio: add debug info for the volume controlMauro Carvalho Chehab1-0/+28
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] em28xx-audio: volumes are invertedMauro Carvalho Chehab1-8/+8
While here, fix volume mask to 5 bits Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] em28xx-audio: add support for mute controlsMauro Carvalho Chehab1-14/+73
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] em28xx-alsa: add mixer support for AC97 volume controlsMauro Carvalho Chehab2-0/+105
Export ac97 volume controls via mixer. Pulseaudio will probably handle it very badly, as it has no idea about how volumes are wired, and how are they associated with each TV input. Those wirings are card model dependent, and we don't have the wiring mappings for each supported device. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] em28xx: Allow to compile it without RC/input supportMauro Carvalho Chehab3-3/+30
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] em28xx: Fix a wrong enum at the ac97 control tablesMauro Carvalho Chehab1-3/+8
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] em28xx: Don't initialize a var if won't be using itMauro Carvalho Chehab4-10/+8
Fixes most cases of initializing a var but not using it. There are still 3 cases at em28xx-alsa, were those vars should probably be used. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] marvell-cam: Basic working MMP camera driverJonathan Corbet5-8/+375
Now we have a camera working over the marvell cam controller core. It works like the cafe driver and has all the same limitations, contiguous DMA only being one of them. But it's a start. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] marvell-cam: Allocate the i2c adapter in the platform driverJonathan Corbet3-4/+9
The upcoming mmp-camera driver will need an i2c_adapter structure allocated externally, so change the core adapter to a pointer and require the platform code to fill it in. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] marvell-cam: Right-shift i2c slave ID's in the cafe driverJonathan Corbet2-2/+9
This makes the cafe i2c implement consistent with the rest of Linux so that the core can use the same slave ID everywhere. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] marvell-cam: Move Cafe-specific register definitions to cafe-driver.cJonathan Corbet2-55/+64
Nobody else ever needs to see these, so let's hide them. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] marvell-cam: Remove the "untested" commentJonathan Corbet1-3/+0
This code is, indeed, tested :) Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] marvell-cam: Pass sensor parameters from the platformJonathan Corbet3-20/+10
Depending on the controller, the ov7670 sensor may be told to work with a different clock speed or to use the SMBUS protocol. Remove the wired-in code and pass that information from the platform layer. The Cafe driver now just assumes it's running on an OLPC XO 1; I do not believe it has ever run anywhere else. Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] marvell-cam: Separate out the Marvell camera coreJonathan Corbet6-2433/+2571
There will eventually be multiple users of the core camera controller, so separate it from the bus/platform/i2c stuff. I've tried to do the minimal set of changes to get the driver functioning in this configuration; I did clean up a bunch of old checkpatch gripes in the process. This driver works like the old one did on OLPC XO 1 systems. Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] marvell-cam: Move cafe-ccic into its own directoryJonathan Corbet8-33/+15
This driver will soon become a family of drivers, so let's give it its own place to live. This move requires putting ov7670.h into include/media, but there are no code changes. Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] drivers/media/video: fix memory leak of snd_cx18_init()Andre Bartke1-0/+1
cxsc is not freed in the error case. Signed-off-by: Andre Bartke <andre.bartke@gmail.com> Cc: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] Correct and add some parameter descriptionsHans Petter Selasky1-2/+3
>From 70d02ce19f64fae4ceee563501e8462a76e17b91 Mon Sep 17 00:00:00 2001 Signed-off-by: Hans Petter Selasky <hselasky@c2i.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] Remove unused definitions which can cause conflict with definitions ↵Hans Petter Selasky2-6/+0
in usb/ch9.h >From 0dd2949dfeae431ed4ffbd00fd14a10dc3747ad0 Mon Sep 17 00:00:00 2001 Signed-off-by: Hans Petter Selasky <hselasky@c2i.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] Correct error code from -ENOMEM to -EINVAL.Hans Petter Selasky1-2/+5
Make sure the return value is set in all cases >From 9b38a5c9878b5e4be2899ae291c4524f5f5fc218 Mon Sep 17 00:00:00 2001 Signed-off-by: Hans Petter Selasky <hselasky@c2i.net> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] rc-core: lirc use unsigned intDavid Härdeman8-43/+24
Durations can never be negative, so it makes sense to consistently use unsigned int for LIRC transmission. Contrary to the initial impression, this shouldn't actually change the userspace API. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] s2255drv: firmware version update, vendor request changeSensoray Linux Development1-15/+7
removes obsolete comments. updates firmware versions. firmware vendor request simplified. Signed-off-by: Dean Anderson <linux-dev@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: make checkpatch.pl happyMauro Carvalho Chehab3-73/+71
Solve the ./scripts/checkpatch.pl compliants for the patches that added xc4000 support, including a few changes at dib0700. While here, remove a few printk noise by converting some msgs into debug ones. Cc: Istvan Varga <istvan_v@mailbox.hu> Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: removed card_typeistvan_v@mailbox.hu4-50/+55
Removed the use of 'card_type' from the tuner configuration structure, and replaced it with separate parameters to set board-specific configuration. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: check firmware versionistvan_v@mailbox.hu1-9/+9
Enabled code to check if the version of the firmware reported by the hardware is correct after uploading it. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] dvb-usb/Kconfig: auto-select XC4000 tuner for dib0700istvan_v@mailbox.hu1-0/+1
Automatically select the xc4000 module for dib0700 if the tuner selection is not customized. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: code cleanupistvan_v@mailbox.hu2-161/+126
Various coding style changes: - removed unused / commented out code - changed C++ style comments to C format - renamed functions and variables that included upper case letters in the name - removed tabs from module parameter descriptions - replaced the use of XC_RESULT_* with standard error codes Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: detect also xc4100Istvan Varga1-3/+7
Added code to detect the XC4100 chip, which is presumably an analog-only "value" version of the XC4000. It is not sure, however, if any devices using this have actually been produced and sold, so the patch may be unneeded. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: removed redundant tuner resetIstvan Varga1-1/+3
This patch causes the tuner reset command to be ignored in the firmware code, since this only happens when the BASE/INIT1 firmware is loaded by check_firmware(), and in that case check_firmware() already calls the reset callback before starting to load the firmware. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: xc_tune_channel() cleanupIstvan Varga1-10/+9
Minor coding changes related to the xc_tune_channel() function. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: implemented analog TV and radioIstvan Varga1-19/+100
The following patch implements support for analog TV and FM radio. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: added audio_std module parameterIstvan Varga1-0/+23
The 'audio_std' module parameter makes it possible to fine tune some audio related aspects of the driver, like setting the exact audio standard (NICAM, A2, etc.) to be used for some video standards. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: setting registersIstvan Varga1-12/+55
This patch implements setting the registers in xc4000_set_params() and xc4000_set_analog_params(). A new register is defined which enables filtering of the composite video output (this is needed to avoid bad picture quality with some boards). Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: debug message improvementsIstvan Varga1-23/+45
The following patch makes a few minor changes to the printing of debug messages, and reporting the tuner status. The 'debug' module parameter can now be set from 0 to 2 to control the verbosity of debug messages. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: firmware initializationIstvan Varga1-20/+16
This patch fixes/cleans up the loading of the firmware file when the driver is loaded and initialized. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: implemented power managementIstvan Varga1-5/+34
The following patch implements the xc4000_sleep() function. The 'no_powerdown' module parameter is now interpreted differently: - 0 uses a device-specific default - 1 disables power management like before - 2 enables power management Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: added card_typeIstvan Varga2-2/+20
This patch adds support for selecting a card type in struct xc4000_config, to allow for implementing some card specific code in the driver. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: check_firmware() cleanupIstvan Varga1-10/+5
This patch makes the following fixes in check_firmware(): - there is only one BASE and INIT1 firmware for XC4000 - loading SCODE is needed also for FM radio Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: simplified load_scodeIstvan Varga1-18/+8
Removed unused code from load_scode() (all SCODE firmwares are assumed to have the HAS_IF bit set). Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: simplified seek_firmware()Istvan Varga1-46/+25
This patch simplifies the code in seek_firmware(). Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: added firmware_name parameterIstvan Varga1-5/+12
The firmware_name module parameter makes it possible to set the firmware file name. It defaults to "xc4000.fw" if not specified. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: fixed frequency errorIstvan Varga1-2/+3
The xc_get_frequency_error() function reported the frequency error incorrectly. The data read from the hardware is a signed integer, in 15625 Hz units. The attached patch fixes the bug. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: added mutexIstvan Varga1-30/+50
This patch adds a mutex to xc4000_priv, to protect the driver from being accessed by multiple processes at the same time. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: added support for 7 MHz DVB-TIstvan Varga1-2/+15
The following patch implements support for DVB-T with 7 MHz bandwidth. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: updated standards tableIstvan Varga1-32/+35
This patch makes the following changes to the standards table: - added 'u16 int_freq' to struct XC_TV_STANDARD (needed for analog TV and radio, 0 for DVB-T) - added new standard for SECAM-D/K video with PAL-D/K audio - the 'int_freq' values are now specified in the table - changed VideoMode for NTSC and PAL-B/G standards Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: code cleanupIstvan Varga2-115/+45
This is the first of a set of patches that update the original xc4000 sources to my modified version. It removes some unused code, and makes a few minor formatting changes. [mchehab@redhat.com: re-add XC_TUNE_ANALOG/XC_TUNE_DIGITAL constants, to avoid compilation breakage] Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] xc4000: Fix a few bad whitespaces on itMauro Carvalho Chehab1-8/+8
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] dib0700: remove notes from bringup of PCTV 340eDevin Heitmueller1-62/+1
Remove some inline comments I had written from when I was computing the proper dib7000p configuration to work with the xc4000. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-27 08:51:40 +0300