summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-01-04ath9k_hw: increase tx status ring buffer sizeRajkumar Manoharan4-4/+4
AR9003 chips read tx status from ring buffer whose max number of status descriptor is mininal compared to max number of tx buffers. On a stress condition, it can be easily overflown which might cause false tx hung detection. Though increasing number of max status descriptors consumes more memory, it helps to avoid false positive chip resets. Cc: Paul Stewart <pstew@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04iwlegacy: 3945: fix hw passive scan on radar channelsStanislaw Gruszka1-4/+4
Patch fix firmware error on "iw dev wlan0 scan passive" for hardware scanning (with disable_hw_scan=0 module parameter). iwl3945 0000:03:00.0: Microcode SW error detected. Restarting 0x82000008. iwl3945 0000:03:00.0: Loaded firmware version: 15.32.2.9 iwl3945 0000:03:00.0: Start IWL Error Log Dump: iwl3945 0000:03:00.0: Status: 0x0002A2E4, count: 1 iwl3945 0000:03:00.0: Desc Time asrtPC blink2 ilink1 nmiPC Line iwl3945 0000:03:00.0: SYSASSERT (0x5) 0041263900 0x13756 0x0031C 0x00000 764 iwl3945 0000:03:00.0: Error Reply type 0x000002FC cmd C_SCAN (0x80) seq 0x443E ser 0x00340000 iwl3945 0000:03:00.0: Command C_SCAN failed: FW Error iwl3945 0000:03:00.0: Can't stop Rx DMA. We have disable ability to change passive scanning to active on particular channel when traffic is detected on that channel. Otherwise firmware will report error, when we try to do passive scan on radar channels. Reported-and-debugged-by: Pedro Francisco <pedrogfrancisco@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04iwlegacy: 3945: simplify calculations of retry limitStanislaw Gruszka3-15/+6
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04iwlegacy: random 3945-rs.c cleanupsStanislaw Gruszka1-20/+11
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04iwlegacy: 4965: remove one il4965_hdl_beaconStanislaw Gruszka2-21/+1
We have two such functions. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04iwlegacy: 3945: get rid of hw_{set,get}_rateStanislaw Gruszka2-20/+1
Remove these helpers, some are not unused at all, one can be unrolled in place of use. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04iwlegacy: 4965: small tx_cmd build cleanupStanislaw Gruszka2-30/+9
Get rid of two inline functions related and simplify a bit rts_retry_limit calculations. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04iwlegacy: 4965: toggle tx antenna inlineStanislaw Gruszka2-25/+18
Make function static and change antenna number inline. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04iwlegacy: move some i/o helpers out of inlineStanislaw Gruszka2-192/+175
This save us about 20k of text size, and should have no impact on performance as hot paths do not use much I/O. Before: text data bss dec hex filename 108512 1784 168 110464 1af80 drivers/net/wireless/iwlegacy/iwl3945.ko 165730 2164 156 168050 29072 drivers/net/wireless/iwlegacy/iwl4965.ko 91942 328 48 92318 1689e drivers/net/wireless/iwlegacy/iwlegacy.ko After: text data bss dec hex filename 95556 1784 168 97508 17ce4 drivers/net/wireless/iwlegacy/iwl3945.ko 154853 2164 156 157173 265f5 drivers/net/wireless/iwlegacy/iwl4965.ko 91634 328 48 92010 1676a drivers/net/wireless/iwlegacy/iwlegacy.ko Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04iwlegacy: off by one in iwl3945_hw_build_tx_cmd_rate()Dan Carpenter1-1/+1
We use "rate_index" like this: rate = iwl3945_rates[rate_index].plcp; The iwl3945_rates[] array has IWL_RATE_COUNT_3945 elements so the limit here is off by one. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04iwlegacy: remove iwl-sta.cStanislaw Gruszka1-817/+0
I forgot to remove this file before. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04rt2x00: Mark active channel's survey data as "in use"Helmut Schaa1-0/+3
This is just a cosmetical fix since we only return survey data for the active channel but it allows iw to show that the survey data is for the currently used channel. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43legacy: Avoid packet losses in the dma worker codeLarry Finger4-50/+126
This patch addresses a bug in the dma worker code that keeps draining packets even when the hardware queues are full. In such cases packets can not be passed down to the device and are erroneusly dropped by the code. It is based on commit bad6919469662b7c92bc6353642aaaa777b36bac, which fixes the same problem in b43. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: fix typo in TX power fixRafał Miłecki1-1/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: fix controling RF overrideRafał Miłecki1-2/+2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: update gain ctl workaroundsRafał Miłecki2-18/+92
Specs were updated, now we match wl according to MMIO dumps. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: add lacking boardflags definesRafał Miłecki1-0/+11
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04ath9k: make ath_mci_duty_cycle staticLuis R. Rodriguez1-1/+1
This fixes this sparse warning: CHECK drivers/net/wireless/ath/ath9k/mci.c drivers/net/wireless/ath/ath9k/mci.c:23:4: warning: symbol 'ath_mci_duty_cycle' was not declared. Should it be static? Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04drivers/iwlwifi: use dma_zalloc_coherent() for DMA allocationDjalal Harouni1-6/+4
Replace dma_alloc_coherent()+memset() with the new dma_zalloc_coherent() Signed-off-by: Djalal Harouni <tixxdz@opendz.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: get idle TSSI valuesRafał Miłecki2-1/+130
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: fix success condition of running samplesRafał Miłecki1-1/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: move common TX/RX functionsRafał Miłecki1-107/+111
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04ath9k_hw: fix sparse complaint on ar9003_switch_com_spdt_get()Luis R. Rodriguez1-2/+2
This fixes this sparse complaint: make C=2 CF="-D__CHECK_ENDIAN__" M=drivers/net/wireless/ath/ CHECK drivers/net/wireless/ath/ath9k/ar9003_eeprom.c drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: expected restricted __le32 [usertype] val drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: got restricted __le16 [usertype] switchcomspdt drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: expected restricted __le32 [usertype] val drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: got restricted __le16 [usertype] switchcomspdt The eep->modalHeader5G.switchcomspdt is a le16 and we return u16, so just return le16_to_cpu(). Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04ath5k: avoid sparse warnings on tracingLuis R. Rodriguez1-2/+3
Just skip the sparse checks on tracing. CHECK drivers/net/wireless/ath/ath5k/base.c include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:19:1: error: incompatible types for operation (<) include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:19:1: left side has type struct ath5k_hw *<noident> include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:19:1: right side has type int include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:37:1: error: incompatible types for operation (<) include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:37:1: left side has type struct ath5k_hw *<noident> include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:37:1: right side has type int include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:63:1: error: incompatible types for operation (<) include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:63:1: left side has type struct ath5k_hw *<noident> include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:63:1: right side has type int /home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output /home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output /home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output /home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output CC [M] drivers/net/wireless/ath/ath5k/base.o Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04ath9k: fix tx queue sparse complaintLuis R. Rodriguez1-0/+3
This fixes this rant from sparse: CHECK drivers/net/wireless/ath/ath9k/xmit.c drivers/net/wireless/ath/ath9k/xmit.c:107:13: warning: context imbalance in 'ath_txq_lock' - wrong count at exit drivers/net/wireless/ath/ath9k/xmit.c:112:13: warning: context imbalance in 'ath_txq_unlock' - unexpected unlock drivers/net/wireless/ath/ath9k/xmit.c:123:30: warning: context imbalance in 'ath_txq_unlock_complete' - unexpected unlock CC [M] drivers/net/wireless/ath/ath9k/xmit. Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04ath9k_hw: fix sparse warnings on ar9003_rtt.cLuis R. Rodriguez1-0/+1
This fixes these sparse warnings: CHECK drivers/net/wireless/ath/ath9k/ar9003_rtt.c drivers/net/wireless/ath/ath9k/ar9003_rtt.c:36:6: warning: symbol 'ar9003_hw_rtt_enable' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:41:6: warning: symbol 'ar9003_hw_rtt_disable' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:46:6: warning: symbol 'ar9003_hw_rtt_set_mask' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:52:6: warning: symbol 'ar9003_hw_rtt_force_restore' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:102:6: warning: symbol 'ar9003_hw_rtt_load_hist' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:135:6: warning: symbol 'ar9003_hw_rtt_fill_hist' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:143:6: warning: symbol 'ar9003_hw_rtt_clear_hist' was not declared. Should it be stati Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-03Merge branch 'master' of ↵John W. Linville1-7/+3
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next
2011-12-22Bluetooth: Add support for BCM20702A0 [0a5c:21e3]Jesse Sung1-0/+1
Add another vendor specific ID for BCM20702A0. output of usb-devices: T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e3 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=9439E5CBF66C C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22mwifiex: fix issues in band configuration codeAmitkumar Karwar2-30/+20
Currently due to following issues in the code even if device is configured in B only, G only or BG mode using iw bitrates command, ibss is getting created in BGN mode. 1) mwifiex_channels_to_cfg80211_channel_type() routine gives channel type as NL80211_CHAN_HT20 for non-HT channel as well, because driver doesn't store HT information provided by stack for the channel. This issue is fixed by maintaining channel type information in 'adapter->channel_type'. 2) Band configuration is unnecessarily overwritten with BGN/AN while setting channel. This patch makes sure that "adapter->config_bands" correctly gets modified while setting channel. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-22mwifiex: use IEEE80211_HT_PARAM_CHA_SEC_* macrosAmitkumar Karwar7-39/+35
Replace driver specific macros with the corresponding IEEE80211_HT_PARAM_CHA_SEC_* macros defined in ieee80211.h. Also, rename 'adapter->chan_offset' to 'adapter->sec_chan_offset' for consistency. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-22mwifiex: remove redundant band config codeAmitkumar Karwar4-95/+24
struct mwifiex_ds_band_cfg and mwifiex_set_radio_band_cfg() routine are unnecessary. It can be done with simple equivalant code. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-22atheros: force endian checks on atheros wireless driversLuis R. Rodriguez1-0/+1
Please NACK nasty patches. Cc: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-22mwl8k: Call ieee80211_stop_tx_ba_cb_irqsafe for already deleted BA streamYogesh Ashok Powar1-7/+7
When stack calls ampdu_action with action = IEEE80211_AMPDU_TX_STOP for a stream that has already been removed from the driver, call ieee80211_tx_ba_stop_irqsafe to clear the stream in the stack. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-22ath9k: fix roadkill due to Joe's patch on ath_dbg() changesLuis R. Rodriguez1-4/+4
Joe changed ath_dbg() to simpify code but while his patch was being merged dfs.c was born and as such did not get the change Joe envisioned. This fixes that. Test compiled with: make allmodconfig Cc: Joe Perches <joe@perches.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: John W. Linville <linville@tuxdriver.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-22iwlagn: fix (remove) use of PAGE_SIZEJohannes Berg2-44/+31
The ICT code erroneously uses PAGE_SIZE. The bug is that PAGE_SIZE isn't necessarily 4096, so on such platforms this code will not work correctly as we'll try to attempt to read an index in the table that the device never wrote, it always has 4096-byte pages. Additionally, the manual alignment code here is unnecessary -- Documentation/DMA-API-HOWTO.txt states: The cpu return address and the DMA bus master address are both guaranteed to be aligned to the smallest PAGE_SIZE order which is greater than or equal to the requested size. This invariant exists (for example) to guarantee that if you allocate a chunk which is smaller than or equal to 64 kilobytes, the extent of the buffer you receive will not cross a 64K boundary. Just use appropriate new constants and get rid of the alignment code. Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-22rt2800: Add support for the Fujitsu Stylistic Q550Alan Cox1-0/+2
Just another USB identifier. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-22libertas: clean up scan thread handlingAndres Salomon1-4/+6
The libertas scan thread expects priv->scan_req to be non-NULL. In theory, it should always be set. In practice, we've seen the following oops: [ 8363.067444] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 8363.067490] pgd = c0004000 [ 8363.078393] [00000004] *pgd=00000000 [ 8363.086711] Internal error: Oops: 17 [#1] PREEMPT [ 8363.091375] Modules linked in: fuse libertas_sdio libertas psmouse mousedev ov7670 mmp_camera joydev videobuf2_core videobuf2_dma_sg videobuf2_memops [last unloaded: scsi_wait_scan] [ 8363.107490] CPU: 0 Not tainted (3.0.0-gf7ccc69 #671) [ 8363.112799] PC is at lbs_scan_worker+0x108/0x5a4 [libertas] [ 8363.118326] LR is at 0x0 [ 8363.120836] pc : [<bf03a854>] lr : [<00000000>] psr: 60000113 [ 8363.120845] sp : ee66bf48 ip : 00000000 fp : 00000000 [ 8363.120845] r10: ee2c2088 r9 : c04e2efc r8 : eef97005 [ 8363.132231] r7 : eee0716f r6 : ee2c02c0 r5 : ee2c2088 r4 : eee07160 [ 8363.137419] r3 : 00000000 r2 : a0000113 r1 : 00000001 r0 : eee07160 [ 8363.143896] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 8363.157630] Control: 10c5387d Table: 2e754019 DAC: 00000015 [ 8363.163334] Process kworker/u:1 (pid: 25, stack limit = 0xee66a2f8) While I've not found a smoking gun, there are two places that raised red flags for me. The first is in _internal_start_scan, when we queue up a scan; we first queue the worker, and then set priv->scan_req. There's theoretically a 50mS delay which should be plenty, but doing things that way just seems racy (and not in the good way). The second is in the scan worker thread itself. Depending on the state of priv->scan_channel, we cancel pending scan runs and then requeue a run in 300mS. We then send the scan command down to the hardware, sleep, and if we get scan results for all the desired channels, we set priv->scan_req to NULL. However, it that's happened in less than 300mS, what happens with the pending scan run? This patch addresses both of those concerns. With the patch applied, we have not seen the oops in the past two weeks. Signed-off-by: Andres Salomon <dilinger@queued.net> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-22ath9k: classify DFS debug header furtherLuis R. Rodriguez1-3/+3
DFS_DEBUG_H is very generic, instead use something more specific to ath9k such as ATH9K_DFS_DEBUG_H. Reported-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-22Merge branch 'for-linville' of ↵John W. Linville7-64/+96
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2011-12-21Bluetooth: btusb: fix bInterval for high/super speed isochronous endpointsBing Zhao1-7/+2
For high-speed/super-speed isochronous endpoints, the bInterval value is used as exponent, 2^(bInterval-1). Luckily we have usb_fill_int_urb() function that handles it correctly. So we just call this function to fill in the RX URB. Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-21wl12xx: mark no sched scan only after FW eventEyal Shapira2-2/+1
stop sched scan isn't an immediate operation and we need to wait for PERIODIC_SCAN_COMPLETE_EVENT_ID after sending a stop before changing internal state and notifying upper layers. Not doing this caused problems when canceling an existing sched scan and immediately requesting to start a new one with a different configuration as the FW was still in the middle of the previous sched scan. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-21wl12xx: fix sched scan of DFS channelsEyal Shapira1-7/+8
DFS channels weren't scanned properly because min/max_duration weren't set for these channels even though they're required by the FW. The change sets passive_duration and min/max_duration for all channels as the FW uses the correct parameters according to the channel type. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-21wl12xx: add missing copyright noticeLuciano Coelho1-0/+21
The wl12xx_platform_data.c file did not have a proper copyright notice. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-21wl12xx: check the actual vif operstate in wl1271_dev_notifyEliad Peller1-1/+11
The current wl1271_dev_notify implementation sets the new operstate to all associated stations (while only a specific vif was changed). Until we'll have a method to get the actual vif from the given dev, check the current operstate of each vif. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-21wl12xx: stop device role on remove_interfaceEliad Peller1-1/+5
When removing a sta/ibss role, the device role has to stopped (and disabled) as well. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-21wl12xx: fix checking of started dev roleEliad Peller1-23/+18
dev_role_id only indicates whether the dev role is enabled, not started (e.g. on IBSS merge, the device role is enabled, but not started). Checking for any role in ROC (in order to determine whether dev role was started) is wrong as well, especially in multi-vif env. Check for started dev role only by checking the dev_hlid. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-21wl12xx: flush packets before stopping dev roleEliad Peller1-0/+3
During sta disconnection, a deauth packet is being queued to the dev role queue. However, the dev role is being stopped before the packet was sent. Flush the tx queue before stopping the dev role. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-21wl12xx: make WL1271_FLAG_IDLE flag per-vifEliad Peller4-6/+16
This flag should be set per-vif, rather than globally. Rename the flag to indicate IN_USE (rather than IDLE), as in the default configuration (i.e. flag is clear) the vif should be idle. Change all the bit operations (and elp conditions) appropriately. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-21wl12xx: remove redundant code from wl1271_op_conf_txEliad Peller1-24/+1
Since the conf_tx callback passes the vif as param, we must have been added first (and mac80211 verifies it). Remove the handling of such case. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-21wl12xx: implement change_interfaceEliad Peller1-0/+12
Implement the change_interface callback by simply removing the current vif and adding a new one after updating the vif type. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-20 10:16:26 +0300