| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 8a7eb2d476c6823cd44d8c25a6230a52417d7ef8 upstream.
Baihua reported an error when boot an ARM64 guest with PAGE_SIZE=64k and
BALLOON is enabled:
hv_vmbus: registering driver hv_balloon
hv_vmbus: probe failed for device 1eccfd72-4b41-45ef-b73a-4a6e44c12924 (-22)
The cause of this is that the ringbuffer size for hv_balloon is not
adjusted with VMBUS_RING_SIZE(), which makes the size not large enough
for ringbuffers on guest with PAGE_SIZE=64k. Therefore use
VMBUS_RING_SIZE() to calculate the ringbuffer size. Note that the old
size (20 * 1024) counts a 4k header in the total size, while
VMBUS_RING_SIZE() expects the parameter as the payload size, so use
16 * 1024.
Cc: <stable@vger.kernel.org> # 5.15.x
Reported-by: Baihua Lu <baihua.lu@microsoft.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20211101150026.736124-1-boqun.feng@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9119570039481d56350af1c636f040fb300b8cf3 upstream.
According to upstream commit 5ec55823438e("net: stmmac:
add clocks management for gmac driver"), it improve clocks
management for stmmac driver. So, it is necessary to implement
the runtime callback in dwmac-socfpga driver because it doesn't
use the common stmmac_pltfr_pm_ops instance. Otherwise, clocks
are not disabled when system enters suspend status.
Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6c53b45c71b4920b5e62f0ea8079a1da382b9434 upstream.
Commit 6098475d4cb4 ("spi: Fix deadlock when adding SPI controllers on
SPI buses") introduced a per-controller mutex. But mutex_unlock() of
said lock is called after the controller is already freed:
spi_unregister_controller(ctlr)
-> put_device(&ctlr->dev)
-> spi_controller_release(dev)
-> mutex_unlock(&ctrl->add_lock)
Move the put_device() after the mutex_unlock().
Fixes: 6098475d4cb4 ("spi: Fix deadlock when adding SPI controllers on SPI buses")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v5.15
Link: https://lore.kernel.org/r/20211111083713.3335171-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 995f54ea962e03ec08b8bc6a4fe11a32b420edd3 upstream.
The GEM CMA helpers allocate non-coherent (i.e., cached) backing storage
with dma_alloc_noncoherent(), but release it with dma_free_wc(). Fix this
with a call to dma_free_noncoherent(). Writecombining storage is still
released with dma_free_wc().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: cf8ccbc72d61 ("drm: Add support for GEM buffers backed by non-coherent memory")
Acked-by: Paul Cercueil <paul@crapouillou.net>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20210708175146.10618-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb561bf9abde49f7e00fdbf9ed2ccf2d86cac8ee upstream.
The efifb and simplefb drivers just render to a pre-allocated frame buffer
and rely on the display hardware being initialized before the kernel boots.
But if another driver already probed correctly and registered a fbdev, the
generic drivers shouldn't be probed since an actual driver for the display
hardware is already present.
This is more likely to occur after commit d391c5827107 ("drivers/firmware:
move x86 Generic System Framebuffers support") since the "efi-framebuffer"
and "simple-framebuffer" platform devices are registered at a later time.
Link: https://lore.kernel.org/r/20211110200253.rfudkt3edbd3nsyj@lahvuun/
Fixes: d391c5827107 ("drivers/firmware: move x86 Generic System Framebuffers support")
Reported-by: Ilya Trukhanov <lahvuun@gmail.com>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Ilya Trukhanov <lahvuun@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211111115757.1351045-1-javierm@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a5b9703fe11cd1d6d7a60102aa2abe686dc1867f upstream.
mt7620.h, included by pinctrl-mt7620.c, mentions MT762X_SOC_MT7628AN
declared in ralink_regs.h.
Fixes: 745ec436de72 ("pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' file")
Cc: stable@vger.kernel.org
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20211031064046.13533-1-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 392006871bb26166bcfafa56faf49431c2cfaaa8 upstream.
The SCM changes set the flags in mcp->out_mb instead of mcp->in_mb so the
data was not actually being read into the mcp->mb[] array from the adapter.
Link: https://lore.kernel.org/r/20211108183012.13895-1-emilne@redhat.com
Fixes: 9f2475fe7406 ("scsi: qla2xxx: SAN congestion management implementation")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 06f6c4c6c3e8354dceddd77bd58f9a7a84c67246 upstream.
ata_dev_config_ncq_prio() and ata_dev_config_devslp() both access pages
of the IDENTIFY DEVICE data log. Before calling ata_read_log_page(),
make sure to check for the existence of the IDENTIFY DEVICE data log and
of the log page accessed using ata_identify_page_supported(). This
avoids useless error messages from ata_read_log_page() and failures with
some LLDD scsi drivers using libsas.
Reported-by: Nikolay <knv418@gmail.com>
Cc: stable@kernel.org # 5.15
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Matthew Perkowski <mgperkow@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 23ef63d5e14f916c5bba39128ebef395859d7c0f upstream.
If ata_read_log_page() fails to read a log page, the ata_dev_err() error
message only print the page number, omitting the log number. In case of
error, facilitate debugging by also printing the log number.
Cc: stable@kernel.org # 5.15
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Matthew Perkowski <mgperkow@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f15863b27752682bb700c21de5f83f613a0fb77e upstream.
This reverts commit 991d9557b0c4 ("drm/i915/tgl/dsi: Gate the ddi clocks
after pll mapping"). The Bspec was updated recently with the pll ungate
sequence similar to that of icl dsi enable sequence. Hence reverting.
Bspec: 49187
Fixes: 991d9557b0c4 ("drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211109120428.15211-1-vandita.kulkarni@intel.com
(cherry picked from commit 4579509ef181480f4e4510d436c691519167c5c2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a31d27fbed5d518734cb60956303eb15089a7634 upstream.
As stated in the bonding doc, trans_start must be set manually for drivers
using NETIF_F_LLTX:
Drivers that use NETIF_F_LLTX flag must also update
netdev_queue->trans_start. If they do not, then the ARP monitor will
immediately fail any slaves using that driver, and those slaves will stay
down.
Link: https://www.kernel.org/doc/html/v5.15/networking/bonding.html#arp-monitor-operation
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b3b180e735409ca0c76642014304b59482e0e653 upstream.
The ptdma driver has added debugfs support, but this fails to build
when debugfs is disabled:
drivers/dma/ptdma/ptdma-debugfs.c: In function 'ptdma_debugfs_setup':
drivers/dma/ptdma/ptdma-debugfs.c:93:54: error: 'struct dma_device' has no member named 'dbg_dev_root'
93 | debugfs_create_file("info", 0400, pt->dma_dev.dbg_dev_root, pt,
| ^
drivers/dma/ptdma/ptdma-debugfs.c:96:55: error: 'struct dma_device' has no member named 'dbg_dev_root'
96 | debugfs_create_file("stats", 0400, pt->dma_dev.dbg_dev_root, pt,
| ^
drivers/dma/ptdma/ptdma-debugfs.c:102:52: error: 'struct dma_device' has no member named 'dbg_dev_root'
102 | debugfs_create_dir("q", pt->dma_dev.dbg_dev_root);
| ^
Remove the #ifdef in the header, as this only saves a few bytes,
but would require ugly #ifdefs in each driver using it.
Simplify the other user while we're at it.
Fixes: e2fb2e2a33fa ("dmaengine: ptdma: Add debugfs entries for PTDMA")
Fixes: 26cf132de6f7 ("dmaengine: Create debug directories for DMA devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210920122017.205975-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 62209e805b5c68577602a5803a71d8e2e11ee0d3 ]
The downstream TLMM binding covers a group of TLMM-related hardware
blocks, but the upstream binding only captures the particular block
related to controlling the TLMM pins from an OS. In the translation of
the driver from downstream, the offset of 0x100000 was lost for the UFS
and SDC pingroups.
Fixes: d5d348a3271f ("pinctrl: qcom: Add SM8350 pinctrl driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20211104170835.1993686-1-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3a3a100473d2f6ebf9bdfe6efedd7e18de724388 ]
It has been observed that dual edge triggered wakeirq GPIOs on SDM845
doesn't trigger interrupts on the falling edge.
Enabling wakeirq_dual_edge_errata for SDM845 indicates that the PDC in
SDM845 suffers from the same problem described, and worked around, by
Doug in 'c3c0c2e18d94 ("pinctrl: qcom: Handle broken/missing PDC dual
edge IRQs on sc7180")', so enable the workaround for SDM845 as well.
The specific problem seen without this is that gpio-keys does not detect
the falling edge of the LID gpio on the Lenovo Yoga C630 and as such
consistently reports the LID as closed.
Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-By: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211102034115.1946036-1-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c7521d3aa2fa7fc785682758c99b5bcae503f6be ]
The ptp_ocp_get_mem() function does not return NULL, it returns error
pointers.
Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5d2ca2e12dfb2aff3388ca57b06f570fa6206ced ]
As reported in [1], e100 was no longer working for suspend/resume
cycles. The previous commit mentioned in the fixes appears to have
broken things and this attempts to practice best known methods for
device power management and keep wake-up working while allowing
suspend/resume to work. To do this, I reorder a little bit of code
and fix the resume path to make sure the device is enabled.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=214933
Fixes: 69a74aef8a18 ("e100: use generic power management")
Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reported-by: Alexey Kuznetsov <axet@me.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Alexey Kuznetsov <axet@me.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5aff430d4e33a0b48a6b3d5beb06f79da23f9916 ]
Fix misleading display error in dmesg if tc filter return fail.
Only i40e status error code should be converted to string, not linux
error code. Otherwise, we return false information about the error.
Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2e6d218c1ec6fb9cd70693b78134cbc35ae0b5a9 ]
Reject TCs creation with proper message if the first queue
assignment is not equal to the power of two.
The first queue number was checked too late in the second queue
iteration, if second queue was configured at all. Now if first queue value
is not a power of two, then trying to create qdisc will be rejected.
Fixes: 8f88b3034db3 ("i40e: Add infrastructure for queue channel support")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3a3b311e3881172fc8e019b6508f04bc40c92d9d ]
Restore part of reset functionality used when reset is called
from the VF to reset itself. Without this fix warning message
is displayed when VF is being removed via sysfs.
Fix the crash of the VF during reset by ensuring
that the PF receives the reset message successfully.
Refactor code to use one function instead of two.
Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 378c67413de18b69fb3bb78d8c4f0f1192cfa973 ]
If the FW doesn't support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT, mlx4 driver
will fail the ib_setup_port_attrs, which is called from
ib_register_device()/enable_device_and_get(), in the end leads to device
not detected[1][2]
To fix it, add a new mlx4_ib_hw_stats_ops1, w/o alloc_hw_port_stats if FW
does not support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2014094
[2] https://lore.kernel.org/linux-rdma/CAMGffEn2wvEnmzc0xe=xYiCLqpphiHDBxCxqAELrBofbUAMQxw@mail.gmail.com
Fixes: 4b5f4d3fb408 ("RDMA: Split the alloc_hw_stats() ops to port and device variants")
Link: https://lore.kernel.org/r/20211115101519.27210-1-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9e0a603cb7dce2a19d98116d42de84b6db26d716 ]
Properly reconfigure VF VSIs after VF request ADQ.
Created new function to update queue mapping and queue pairs per TC
with AQ update VSI. This sets proper RSS size on NIC.
VFs num_queue_pairs should not be changed during setup of queue maps.
Previously, VF main VSI in ADQ had configured too many queues and had
wrong RSS size, which lead to packets not being consumed and drops in
connectivity.
Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d2a69fefd75683004ffe87166de5635b3267ee07 ]
Currently, the i40e_vsi_setup_queue_map is basing the count of queues in
TCs on a VSI's alloc_queue_pairs member which is not changed throughout
any user's action (for example via ethtool's set_channels callback).
This implies that vsi->tc_config.tc_info[n].qcount value that is given
to the kernel via netdev_set_tc_queue() that notifies about the count of
queues per particular traffic class is constant even if user has changed
the total count of queues.
This in turn caused the kernel warning after setting the queue count to
the lower value than the initial one:
$ ethtool -l ens801f0
Channel parameters for ens801f0:
Pre-set maximums:
RX: 0
TX: 0
Other: 1
Combined: 64
Current hardware settings:
RX: 0
TX: 0
Other: 1
Combined: 64
$ ethtool -L ens801f0 combined 40
[dmesg]
Number of in use tx queues changed invalidating tc mappings. Priority
traffic classification disabled!
Reason was that vsi->alloc_queue_pairs stayed at 64 value which was used
to set the qcount on TC0 (by default only TC0 exists so all of the
existing queues are assigned to TC0). we update the offset/qcount via
netdev_set_tc_queue() back to the old value but then the
netif_set_real_num_tx_queues() is using the vsi->num_queue_pairs as a
value which got set to 40.
Fix it by using vsi->req_queue_pairs as a queue count that will be
distributed across TCs. Do it only for non-zero values, which implies
that user actually requested the new count of queues.
For VSIs other than main, stay with the vsi->alloc_queue_pairs as we
only allow manipulating the queue count on main VSI.
Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 37d9e304acd903a445df8208b8a13d707902dea6 ]
Remove the reason of null pointer dereference in sync VSI filters.
Added new I40E_VSI_RELEASING flag to signalize deleting and releasing
of VSI resources to sync this thread with sync filters subtask.
Without this patch it is possible to start update the VSI filter list
after VSI is removed, that's causing a kernel oops.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Reviewed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Reviewed-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com>
Reviewed-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6afbd7b3c53cb7417189f476e99d431daccb85b0 ]
Setting VLAN port increasing RX queue max_pkt_size
by 4 bytes to take VLAN tag into account.
Trigger the VF reset when setting port VLAN for
VF to renegotiate its capabilities and reinitialize.
Fixes: ba4e003d29c1 ("i40e: don't hold spinlock while resetting VF")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9b5a333272a48c2f8b30add7a874e46e8b26129c ]
Access to netdev after free_netdev() will cause use-after-free bug.
Move debug log before free_netdev() call to avoid it.
Fixes: 7472dd9f6499 ("staging: fsl-dpaa2/eth: Move print message")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2460386bef0b9b98b71728d3c173e15558b78d82 ]
The kernel test robot reported a following issue:
>> drivers/net/ethernet/marvell/mvmdio.c:426:36: warning:
unused variable 'orion_mdio_acpi_match' [-Wunused-const-variable]
static const struct acpi_device_id orion_mdio_acpi_match[] = {
^
1 warning generated.
Fix that by surrounding the variable by appropriate ifdef.
Fixes: c54da4c1acb1 ("net: mvmdio: add ACPI support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211115153024.209083-1-mw@semihalf.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5cb37a26355d79ab290220677b1b57d28e99a895 ]
hba->outstanding_tasks, which is read under host_lock spinlock, tells the
interrupt handler what task management tags are in use by the driver. The
doorbell register bits indicate which tags are in use by the hardware. A
doorbell bit that is 0 is because the bit has yet to be set by the driver,
or because the task is complete. It is only possible to disambiguate the 2
cases, if reading/writing the doorbell register is synchronized with
reading/writing hba->outstanding_tasks.
For that reason, reading REG_UTP_TASK_REQ_DOOR_BELL must be done under
spinlock.
Link: https://lore.kernel.org/r/20211108064815.569494-3-adrian.hunter@intel.com
Fixes: f5ef336fd2e4 ("scsi: ufs: core: Fix task management completion")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 886fe2915cce6658b0fc19e64b82879325de61ea ]
__ufshcd_issue_tm_cmd() clears req->end_io_data after timing out, which
races with the completion function ufshcd_tmc_handler() which expects
req->end_io_data to have a value.
Note __ufshcd_issue_tm_cmd() and ufshcd_tmc_handler() are already
synchronized using hba->tmf_rqs and hba->outstanding_tasks under the
host_lock spinlock.
It is also not necessary (nor typical) to clear req->end_io_data because
the block layer does it before allocating out requests e.g. via
blk_get_request().
So fix by not clearing it.
Link: https://lore.kernel.org/r/20211108064815.569494-2-adrian.hunter@intel.com
Fixes: f5ef336fd2e4 ("scsi: ufs: core: Fix task management completion")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4edd8cd4e86dd3047e5294bbefcc0a08f66a430f ]
This fixes a regression added with:
commit f0f82e2476f6 ("scsi: core: Fix capacity set to zero after
offlinining device")
The problem is that after iSCSI recovery, iscsid will call into the kernel
to set the dev's state to running, and with that patch we now call
scsi_rescan_device() with the state_mutex held. If the SCSI error handler
thread is just starting to test the device in scsi_send_eh_cmnd() then it's
going to try to grab the state_mutex.
We are then stuck, because when scsi_rescan_device() tries to send its I/O
scsi_queue_rq() calls -> scsi_host_queue_ready() -> scsi_host_in_recovery()
which will return true (the host state is still in recovery) and I/O will
just be requeued. scsi_send_eh_cmnd() will then never be able to grab the
state_mutex to finish error handling.
To prevent the deadlock move the rescan-related code to after we drop the
state_mutex.
This also adds a check for if we are already in the running state. This
prevents extra scans and helps the iscsid case where if the transport class
has already onlined the device during its recovery process then we don't
need userspace to do it again plus possibly block that daemon.
Link: https://lore.kernel.org/r/20211105221048.6541-3-michael.christie@oracle.com
Fixes: f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device")
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: lijinlin <lijinlin3@huawei.com>
Cc: Wu Bo <wubo40@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ff1f6b6ba6f97f50862aa50e79959cc8ddc2566 ]
The following has been observed on a test setup:
WARNING: CPU: 4 PID: 250 at drivers/scsi/ufs/ufshcd.c:2737 ufshcd_queuecommand+0x468/0x65c
Call trace:
ufshcd_queuecommand+0x468/0x65c
scsi_send_eh_cmnd+0x224/0x6a0
scsi_eh_test_devices+0x248/0x418
scsi_eh_ready_devs+0xc34/0xe58
scsi_error_handler+0x204/0x80c
kthread+0x150/0x1b4
ret_from_fork+0x10/0x30
That warning is triggered by the following statement:
WARN_ON(lrbp->cmd);
Fix this warning by clearing lrbp->cmd from the abort handler.
Link: https://lore.kernel.org/r/20211104181059.4129537-1-bvanassche@acm.org
Fixes: 7a3e97b0dc4b ("[SCSI] ufshcd: UFS Host controller driver")
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c4c3176739dfa6efcc5b1d1de4b3fd2b51b048c7 ]
On regular ConnectX HCAs getting encap mode isn't supported when the
E-Switch is in NONE mode. Current code would return no error code when
trying to get encap mode in such case which is wrong.
Fix by returning error value to indicate failure to caller in such case.
Fixes: 8e0aa4bc959c ("net/mlx5: E-switch, Protect eswitch mode changes")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ae396d85c01c7bdc9eeceecde1f493d03f793465 ]
Currently, In NETDEV_CHANGELOWERSTATE/NETDEV_CHANGEUPPERSTATE events
handling, tracking is not fully completed if the LAG device is not ready
at the time the events occur. But, we must keep track of the upper and
lower states after receiving the events because RoCE needs this info in
mlx5_lag_get_roce_netdev() - in order to return the corresponding port
that its running on. Returning the wrong (not most recent) port will lead
to gids table being incorrect.
For example: If during the attachment of a slave to the bond, the other
non-attached port performs pci_reload, then the LAG device is not ready,
but that should not result in dismissing attached slave tracker update
automatically (which is performed in mlx5_handle_changelowerstate()), Since
these events might not come later, which can lead to both bond ports
having tx_enabled=0 - which is not a valid state of LAG bond.
Fixes: 9b412cc35f00 ("net/mlx5e: Add LAG warning if bond slave is not lag master")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 806401c20a0f9c51b6c8fd7035671e6ca841f6c2 ]
CT clear action offload adds additional mod hdr actions to the
flow's original mod actions in order to clear the registers which
hold ct_state.
When such flow also includes encap action, a neigh update event
can cause the driver to unoffload the flow and then reoffload it.
Each time this happens, the ct clear handling adds that same set
of mod hdr actions to reset ct_state until the max of mod hdr
actions is reached.
Also the driver never releases the allocated mod hdr actions and
causing a memleak.
Fix above two issues by moving CT clear mod acts allocation
into the parsing actions phase and only use it when offloading the rule.
The release of mod acts will be done in the normal flow_put().
backtrace:
[<000000007316e2f3>] krealloc+0x83/0xd0
[<00000000ef157de1>] mlx5e_mod_hdr_alloc+0x147/0x300 [mlx5_core]
[<00000000970ce4ae>] mlx5e_tc_match_to_reg_set_and_get_id+0xd7/0x240 [mlx5_core]
[<0000000067c5fa17>] mlx5e_tc_match_to_reg_set+0xa/0x20 [mlx5_core]
[<00000000d032eb98>] mlx5_tc_ct_entry_set_registers.isra.0+0x36/0xc0 [mlx5_core]
[<00000000fd23b869>] mlx5_tc_ct_flow_offload+0x272/0x1f10 [mlx5_core]
[<000000004fc24acc>] mlx5e_tc_offload_fdb_rules.part.0+0x150/0x620 [mlx5_core]
[<00000000dc741c17>] mlx5e_tc_encap_flows_add+0x489/0x690 [mlx5_core]
[<00000000e92e49d7>] mlx5e_rep_update_flows+0x6e4/0x9b0 [mlx5_core]
[<00000000f60f5602>] mlx5e_rep_neigh_update+0x39a/0x5d0 [mlx5_core]
Fixes: 1ef3018f5af3 ("net/mlx5e: CT: Support clear action")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2eb0cb31bc4ce2ede5460cf3ef433b40cf5f040d ]
A user can enable VFs without changing E-Switch mode, this can happen
when a user moves straight to switchdev mode and only once in switchdev
VFs are enabled via the sysfs interface.
The cited commit assumed this isn't possible and exposed a single
API function where the E-switch calls into the lag code, breaks the lag
and prevents any other lag operations to take place until the
E-switch update has ended.
Breaking the hardware lag when it isn't needed can make it such that
hardware lag can't be enabled again.
In the sysfs call path check if the current E-Switch mode is NONE,
in the context of the function it can only mean the E-Switch is moving
out of NONE mode and the hardware lag should be disabled and enabled
once the mode change has ended. If the mode isn't NONE it means
VFs are about to be enabled and such operation doesn't require
toggling the hardware lag.
Fixes: cac1eb2cf2e3 ("net/mlx5: Lag, properly lock eswitch if needed")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ba50cd9451f6c49cf0841c0a4a146ff6a2822699 ]
In the fast unload flow, the device state is set to internal error,
which indicates that the driver started the destroy process.
In this case, when a destroy command is being executed, it should return
MLX5_CMD_STAT_OK.
Fix MLX5_CMD_OP_DESTROY_UCTX and MLX5_CMD_OP_DESTROY_UMEM to return OK
instead of EIO.
This fixes a call trace in the umem release process -
[ 2633.536695] Call Trace:
[ 2633.537518] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs]
[ 2633.538596] remove_client_context+0x8b/0xd0 [ib_core]
[ 2633.539641] disable_device+0x8c/0x130 [ib_core]
[ 2633.540615] __ib_unregister_device+0x35/0xa0 [ib_core]
[ 2633.541640] ib_unregister_device+0x21/0x30 [ib_core]
[ 2633.542663] __mlx5_ib_remove+0x38/0x90 [mlx5_ib]
[ 2633.543640] auxiliary_bus_remove+0x1e/0x30 [auxiliary]
[ 2633.544661] device_release_driver_internal+0x103/0x1f0
[ 2633.545679] bus_remove_device+0xf7/0x170
[ 2633.546640] device_del+0x181/0x410
[ 2633.547606] mlx5_rescan_drivers_locked.part.10+0x63/0x160 [mlx5_core]
[ 2633.548777] mlx5_unregister_device+0x27/0x40 [mlx5_core]
[ 2633.549841] mlx5_uninit_one+0x21/0xc0 [mlx5_core]
[ 2633.550864] remove_one+0x69/0xe0 [mlx5_core]
[ 2633.551819] pci_device_remove+0x3b/0xc0
[ 2633.552731] device_release_driver_internal+0x103/0x1f0
[ 2633.553746] unbind_store+0xf6/0x130
[ 2633.554657] kernfs_fop_write+0x116/0x190
[ 2633.555567] vfs_write+0xa5/0x1a0
[ 2633.556407] ksys_write+0x4f/0xb0
[ 2633.557233] do_syscall_64+0x5b/0x1a0
[ 2633.558071] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 2633.559018] RIP: 0033:0x7f9977132648
[ 2633.559821] Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 55 6f 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55
[ 2633.562332] RSP: 002b:00007fffb1a83888 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2633.563472] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f9977132648
[ 2633.564541] RDX: 000000000000000c RSI: 000055b90546e230 RDI: 0000000000000001
[ 2633.565596] RBP: 000055b90546e230 R08: 00007f9977406860 R09: 00007f9977a54740
[ 2633.566653] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f99774056e0
[ 2633.567692] R13: 000000000000000c R14: 00007f9977400880 R15: 000000000000000c
[ 2633.568725] ---[ end trace 10b4fe52945e544d ]---
Fixes: 6a6fabbfa3e8 ("net/mlx5: Update pci error handler entries and command translation")
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 76ded29d3fcda4928da8849ffc446ea46871c1c2 ]
Prior to this patch in case mlx5_core_destroy_cq() failed it proceeds
to rest of destroy operations. mlx5_core_destroy_cq() could be called again
by user and cause additional call of mlx5_debug_cq_remove().
cq->dbg was not nullify in previous call and cause the crash.
Fix it by nullify cq->dbg pointer after removal.
Also proceed to destroy operations only if FW return 0
for MLX5_CMD_OP_DESTROY_CQ command.
general protection fault, probably for non-canonical address 0x2000300004058: 0000 [#1] SMP PTI
CPU: 5 PID: 1228 Comm: python Not tainted 5.15.0-rc5_for_upstream_min_debug_2021_10_14_11_06 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:lockref_get+0x1/0x60
Code: 5d e9 53 ff ff ff 48 8d 7f 70 e8 0a 2e 48 00 c7 85 d0 00 00 00 02
00 00 00 c6 45 70 00 fb 5d c3 c3 cc cc cc cc cc cc cc cc 53 <48> 8b 17
48 89 fb 85 d2 75 3d 48 89 d0 bf 64 00 00 00 48 89 c1 48
RSP: 0018:ffff888137dd7a38 EFLAGS: 00010206
RAX: 0000000000000000 RBX: ffff888107d5f458 RCX: 00000000fffffffe
RDX: 000000000002c2b0 RSI: ffffffff8155e2e0 RDI: 0002000300004058
RBP: ffff888137dd7a88 R08: 0002000300004058 R09: ffff8881144a9f88
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881141d4000
R13: ffff888137dd7c68 R14: ffff888137dd7d58 R15: ffff888137dd7cc0
FS: 00007f4644f2a4c0(0000) GS:ffff8887a2d40000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b4500f4380 CR3: 0000000114f7a003 CR4: 0000000000170ea0
Call Trace:
simple_recursive_removal+0x33/0x2e0
? debugfs_remove+0x60/0x60
debugfs_remove+0x40/0x60
mlx5_debug_cq_remove+0x32/0x70 [mlx5_core]
mlx5_core_destroy_cq+0x41/0x1d0 [mlx5_core]
devx_obj_cleanup+0x151/0x330 [mlx5_ib]
? __pollwait+0xd0/0xd0
? xas_load+0x5/0x70
? xa_load+0x62/0xa0
destroy_hw_idr_uobject+0x20/0x80 [ib_uverbs]
uverbs_destroy_uobject+0x3b/0x360 [ib_uverbs]
uobj_destroy+0x54/0xa0 [ib_uverbs]
ib_uverbs_cmd_verbs+0xaf2/0x1160 [ib_uverbs]
? uverbs_finalize_object+0xd0/0xd0 [ib_uverbs]
ib_uverbs_ioctl+0xc4/0x1b0 [ib_uverbs]
__x64_sys_ioctl+0x3e4/0x8e0
Fixes: 94b960b9deff ("net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path")
Signed-off-by: Valentine Fatiev <valentinef@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d7751d6476185ff754b9dad2cba0c0a6e43ecadc ]
E-Switch encap mode is relevant only when in switchdev mode.
The RDMA driver can query the encap configuration via
mlx5_eswitch_get_encap_mode(). Make sure it returns the currently
used mode and not the set one.
This reverts the cited commit which reset the encap mode
on entering switchdev and fixes the original issue properly.
Fixes: 9a64144d683a ("net/mlx5: E-Switch, Fix default encap mode")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 362980eada85b5ea691e5e0d9257a991aa7ade47 ]
Function mlx5e_take_tmp_flow() skips flows with zero reference count. This
can cause syndrome 0x179e84 when the called from neigh or route update code
and the skipped flow is not removed from the hardware by the time
underlying encap/decap resource is deleted. Add new completion
'del_hw_done' that is completed when flow is unoffloaded. This is safe to
do because flow with reference count zero needs to be detached from
encap/decap entry before its memory is deallocated, which requires taking
the encap_tbl_lock mutex that is held by the event handlers code.
Fixes: 8914add2c9e5 ("net/mlx5e: Handle FIB events to update tunnel endpoint device")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cc4a9cc03faa6d8db1a6954bb536f2c1e63bdff6 ]
For the TLS RX resync flow, we maintain a list of TLS contexts
that require some attention, to communicate their resync information
to the HW.
Here we fix list corruptions, by protecting the entries against
movements coming from resync_handle_seq_match(), until their resync
handling in napi is fully completed.
Fixes: e9ce991bce5b ("net/mlx5e: kTLS, Add resiliency to RX resync failures")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6cd7397d01c4a3e09757840299e4f114f0aa5fa0 ]
Preset both receive and send CQ pointers prior to call to the drivers and
overwrite it later again till the mlx4 is going to be changed do not
overwrite ibqp properties.
This change is needed for mlx5, because in case of QP creation failure, it
will go to the path of QP destroy which relies on proper CQ pointers.
BUG: KASAN: use-after-free in create_qp.cold+0x164/0x16e [mlx5_ib]
Write of size 8 at addr ffff8880064c55c0 by task a.out/246
CPU: 0 PID: 246 Comm: a.out Not tainted 5.15.0+ #291
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x1f/0x140
kasan_report.cold+0x83/0xdf
create_qp.cold+0x164/0x16e [mlx5_ib]
mlx5_ib_create_qp+0x358/0x28a0 [mlx5_ib]
create_qp.part.0+0x45b/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Allocated by task 246:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0xa4/0xd0
create_qp.part.0+0x92/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 246:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x10c/0x150
slab_free_freelist_hook+0xb4/0x1b0
kfree+0xe7/0x2a0
create_qp.part.0+0x52b/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 514aee660df4 ("RDMA: Globally allocate and release QP memory")
Link: https://lore.kernel.org/r/2dbb2e2cbb1efb188a500e5634be1d71956424ce.1636631035.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 812fcc609502096e98cc3918a4b807722dba8fd9 ]
A Lenovo ThinkStation S20 (4157CTO BIOS 60KT41AUS) fails to boot on
recent kernels including the think-lmi driver, due to the fact that
errors returned by the tlmi_analyze() function are ignored by
tlmi_probe(), where tlmi_sysfs_init() is called unconditionally.
This results in making use of an array of already freed, non-null
pointers and other uninitialized globals, causing all sorts of nasty
kobject and memory faults.
Make use of the analyze function return value, free a couple leaked
allocations, and remove the settings_count field, which is incremented
but never consumed.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Mark Gross <markgross@kernel.org>
Reviewed-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/163639463588.1330483.15850167112490200219.stgit@omen
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c961a7d2aa23ae19e0099fbcdf1040fb760eea83 ]
If 'led_classdev_register()' fails, some additional resources should be
released.
Add the missing 'i8042_remove_filter()' and 'lis3lv02d_remove_fs()' calls
that are already in the remove function but are missing here.
Fixes: a4c724d0723b ("platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream")
Fixes: 9e0c79782143 ("lis3lv02d: merge with leds hp disk")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5a4f218f8f16d2e3a7906b7ca3654ffa946895f8.1636314074.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d6912b1251b47e6b04ea8c8881dfb35a6e7a3e29 ]
gpio-rockchip uses interfaces that are provided by the Kconfig
symbol GENERIC_IRQ_CHIP, so the driver should select that symbol
in order to prevent build errors.
Fixes these build errors (and more):
aarch64-linux-ld: drivers/gpio/gpio-rockchip.o: in function `rockchip_irq_disable':
gpio-rockchip.c:(.text+0x454): undefined reference to `irq_gc_mask_set_bit'
aarch64-linux-ld: drivers/gpio/gpio-rockchip.o: in function `rockchip_irq_enable':
gpio-rockchip.c:(.text+0x478): undefined reference to `irq_gc_mask_clr_bit'
aarch64-linux-ld: drivers/gpio/gpio-rockchip.o: in function `rockchip_interrupts_register':
gpio-rockchip.c:(.text+0x518): undefined reference to `irq_generic_chip_ops'
aarch64-linux-ld: gpio-rockchip.c:(.text+0x594): undefined reference to `__irq_alloc_domain_generic_chips'
aarch64-linux-ld: gpio-rockchip.c:(.text+0x5cc): undefined reference to `irq_get_domain_generic_chip'
aarch64-linux-ld: gpio-rockchip.c:(.text+0x5e0): undefined reference to `irq_gc_ack_set_bit'
aarch64-linux-ld: gpio-rockchip.c:(.text+0x604): undefined reference to `irq_gc_set_wake'
Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4293014230b887d94b68aa460ff00153454a3709 ]
Restore VLAN filters after the link is brought down, and up - since all
filters are deleted from HW during the netdev link down routine.
Fixes: ed1f5b58ea01 ("i40evf: remove VLAN filters on close")
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9a6e9e483a9684a34573fd9f9e30ecfb047cb8cb ]
Now setting combine to 0 will be rejected with the
appropriate error code.
This has been implemented by adding a condition that checks
the value of combine equal to zero.
Without this patch, when the user requested it, no error was
returned and combine was set to the default value for VF.
Fixes: 5520deb15326 ("iavf: Enable support for up to 16 queues")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 321421b57a12e933f92b228e0e6d0b2c6541f41d ]
While issuing VF Reset from the guest OS, the VF driver prints
logs about critical / Overflow error detection. This is not an
actual error since the VF_MBX_ARQLEN register is set to all FF's
for a short period of time and the VF would catch the bits set if
it was reading the register during that spike of time.
This patch introduces an additional check to ignore this condition
since the VF is in reset.
Fixes: 19b73d8efaa4 ("i40evf: Add additional check for reset")
Signed-off-by: Surabhi Boob <surabhi.boob@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 131b0edc4028bb88bb472456b1ddba526cfb7036 ]
In some cases, the ethtool get_rxfh handler may be called with a null
key or indir parameter. So check these pointers, or you will have a very
bad day.
Fixes: 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS")
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4f0400803818f2642f066d3eacaf013f23554cc7 ]
In iavf_config_clsflower, the filter structure could be accidentally
released at the end, if iavf_parse_cls_flower or iavf_handle_tclass ever
return a non-zero but positive value.
In this case, the function continues through to the end, and will call
kfree() on the filter structure even though it has been added to the
linked list.
This can actually happen because iavf_parse_cls_flower will return
a positive IAVF_ERR_CONFIG value instead of the traditional negative
error codes.
Fix this by ensuring that the kfree() check and error checks are
similar. Use the more idiomatic "if (err)" to catch all non-zero error
codes.
Fixes: 0075fa0fadd0 ("i40evf: Add support to apply cloud filters")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8905072a192fffe9389255489db250c73ecab008 ]
The driver could only quit allmulti when allmulti and promisc modes are
turn on at the same time. If promisc had been off there was no way to turn
off allmulti mode.
The patch corrects this behavior. Switching allmulti does not depends on
promisc state mode anymore
Fixes: f42a5c74da99 ("i40e: Add allmulti support for the VF")
Signed-off-by: Piotr Marczak <piotr.marczak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2135a8d5c8186bc92901dc00f179ffd50e54c2ac ]
In iavf_configure_clsflower() the function will bail out if it is unable
to obtain the crit_section lock in a reasonable time. However, it will
clear the lock when exiting, so fix this.
Fixes: 640a8af5841f ("i40evf: Reorder configure_clsflower to avoid deadlock on error")
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
