summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-12-08drm/i915/dp: Perform 30ms delay after source OUI writeLyude Paul4-0/+21
commit a44f42ba7f1ad7d3c17bc7d91013fe814a53c5dc upstream. While working on supporting the Intel HDR backlight interface, I noticed that there's a couple of laptops that will very rarely manage to boot up without detecting Intel HDR backlight support - even though it's supported on the system. One example of such a laptop is the Lenovo P17 1st generation. Following some investigation Ville Syrjälä did through the docs they have available to them, they discovered that there's actually supposed to be a 30ms wait after writing the source OUI before we begin setting up the rest of the backlight interface. This seems to be correct, as adding this 30ms delay seems to have completely fixed the probing issues I was previously seeing. So - let's start performing a 30ms wait after writing the OUI, which we do in a manner similar to how we keep track of PPS delays (e.g. record the timestamp of the OUI write, and then wait for however many ms are left since that timestamp right before we interact with the backlight) in order to avoid waiting any longer then we need to. As well, this also avoids us performing this delay on systems where we don't end up using the HDR backlight interface. V3: * Move last_oui_write into intel_dp V2: * Move panel delays into intel_pps Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.12+ Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211130212912.212044-1-lyude@redhat.com (cherry picked from commit c7c90b0b8418a97d3aa8b39aae1992908948efad) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08drm/amd/display: Allow DSC on supported MST branch devicesNicholas Kazlauskas1-4/+16
commit 94ebc035456a4ccacfbbef60c444079a256623ad upstream. [Why] When trying to lightup two 4k60 non-DSC displays behind a branch device that supports DSC we can't lightup both at once due to bandwidth limitations - each requires 48 VCPI slots but we only have 63. [How] The workaround already exists in the code but is guarded by a CONFIG that cannot be set by the user and shouldn't need to be. Check for specific branch device IDs to device whether to enable the workaround for multiple display scenarios. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08scsi: ufs: ufs-pci: Add support for Intel ADLAdrian Hunter1-0/+18
commit 7dc9fb47bc9a95f1cc6c5655341860c5e50f91d4 upstream. Add PCI ID and callbacks to support Intel Alder Lake. Link: https://lore.kernel.org/r/20211124204218.1784559-1-adrian.hunter@intel.com Cc: stable@vger.kernel.org # v5.15+ Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08scsi: lpfc: Fix non-recovery of remote ports following an unsolicited LOGOJames Smart1-7/+2
commit 0956ba63bd94355bf38cd40f7eb9104577739ab8 upstream. A commit introduced formal regstration of all Fabric nodes to the SCSI transport as well as REG/UNREG RPI mailbox requests. The commit introduced the NLP_RELEASE_RPI flag for rports set in the lpfc_cmpl_els_logo_acc() routine to help clean up the RPIs. This new code caused the driver to release the RPI value used for the remote port and marked the RPI invalid. When the driver later attempted to re-login, it would use the invalid RPI and the adapter rejected the PLOGI request. As no login occurred, the devloss timer on the rport expired and connectivity was lost. This patch corrects the code by removing the snippet that requests the rpi to be unregistered. This change only occurs on a node that is already marked to be rediscovered. This puts the code back to its original behavior, preserving the already-assigned rpi value (registered or not) which can be used on the re-login attempts. Link: https://lore.kernel.org/r/20211123165646.62740-1-jsmart2021@gmail.com Fixes: fe83e3b9b422 ("scsi: lpfc: Fix node handling for Fabric Controller and Domain Controller") Cc: <stable@vger.kernel.org> # v5.14+ Co-developed-by: Paul Ely <paul.ely@broadcom.com> Signed-off-by: Paul Ely <paul.ely@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08sata_fsl: fix warning in remove_proc_entry when rmmod sata_fslBaokun Li1-5/+3
commit 6f48394cf1f3e8486591ad98c11cdadb8f1ef2ad upstream. Trying to remove the fsl-sata module in the PPC64 GNU/Linux leads to the following warning: ------------[ cut here ]------------ remove_proc_entry: removing non-empty directory 'irq/69', leaking at least 'fsl-sata[ff0221000.sata]' WARNING: CPU: 3 PID: 1048 at fs/proc/generic.c:722 .remove_proc_entry+0x20c/0x220 IRQMASK: 0 NIP [c00000000033826c] .remove_proc_entry+0x20c/0x220 LR [c000000000338268] .remove_proc_entry+0x208/0x220 Call Trace: .remove_proc_entry+0x208/0x220 (unreliable) .unregister_irq_proc+0x104/0x140 .free_desc+0x44/0xb0 .irq_free_descs+0x9c/0xf0 .irq_dispose_mapping+0x64/0xa0 .sata_fsl_remove+0x58/0xa0 [sata_fsl] .platform_drv_remove+0x40/0x90 .device_release_driver_internal+0x160/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] ---[ end trace 0ea876d4076908f5 ]--- The driver creates the mapping by calling irq_of_parse_and_map(), so it also has to dispose the mapping. But the easy way out is to simply use platform_get_irq() instead of irq_of_parse_map(). Also we should adapt return value checking and propagate error values. In this case the mapping is not managed by the device but by the of core, so the device has not to dispose the mapping. Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fslBaokun Li1-2/+10
commit 6c8ad7e8cf29eb55836e7a0215f967746ab2b504 upstream. When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should not be executed in drv->remove. These functions should be executed in host_stop after port_stop. Therefore, we move these functions to the new function sata_fsl_host_stop and bind the new function to host_stop. Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08dma-buf: system_heap: Use 'for_each_sgtable_sg' in pages free flowGuangming1-1/+1
commit 679d94cd7d900871e5bc9cf780bd5b73af35ab42 upstream. For previous version, it uses 'sg_table.nent's to traverse sg_table in pages free flow. However, 'sg_table.nents' is reassigned in 'dma_map_sg', it means the number of created entries in the DMA adderess space. So, use 'sg_table.nents' in pages free flow will case some pages can't be freed. Here we should use sg_table.orig_nents to free pages memory, but use the sgtable helper 'for each_sgtable_sg'(, instead of the previous rather common helper 'for_each_sg' which maybe cause memory leak) is much better. Fixes: d963ab0f15fb0 ("dma-buf: system_heap: Allocate higher order pages if available") Signed-off-by: Guangming <Guangming.Cao@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Cc: <stable@vger.kernel.org> # 5.11.* Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211126074904.88388-1-guangming.cao@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08iwlwifi: mvm: retry init flow if failedMordechay Goodstein5-8/+47
commit 5283dd677e52af9db6fe6ad11b2f12220d519d0c upstream. In some very rare cases the init flow may fail. In many cases, this is recoverable, so we can retry. Implement a loop to retry two more times after the first attempt failed. This can happen in two different situations, namely during probe and during mac80211 start. For the first case, a simple loop is enough. For the second case, we need to add a flag to prevent mac80211 from trying to restart it as well, leaving full control with the driver. Cc: <stable@vger.kernel.org> Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20211110150132.57514296ecab.I52a0411774b700bdc7dedb124d8b59bf99456eb2@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink()Xiongfeng Wang1-5/+4
commit 2c1b5a84669d2477d8fffe9136e86a2cff591729 upstream. When I hot added a CPU, I found 'cpufreq' directory was not created below /sys/devices/system/cpu/cpuX/. It is because get_cpu_device() failed in add_cpu_dev_symlink(). cpufreq_add_dev() is the .add_dev callback of a CPU subsys interface. It will be called when the CPU device registered into the system. The call chain is as follows: register_cpu() ->device_register() ->device_add() ->bus_probe_device() ->cpufreq_add_dev() But only after the CPU device has been registered, we can get the CPU device by get_cpu_device(), otherwise it will return NULL. Since we already have the CPU device in cpufreq_add_dev(), pass it to add_cpu_dev_symlink(). I noticed that the 'kobj' of the CPU device has been added into the system before cpufreq_add_dev(). Fixes: 2f0ba790df51 ("cpufreq: Fix creation of symbolic links to policy directories") Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08ipmi: Move remove_work to dedicated workqueueIoanna Alifieraki1-1/+12
commit 1d49eb91e86e8c1c1614c72e3e958b6b7e2472a9 upstream. Currently when removing an ipmi_user the removal is deferred as a work on the system's workqueue. Although this guarantees the free operation will occur in non atomic context, it can race with the ipmi_msghandler module removal (see [1]) . In case a remove_user work is scheduled for removal and shortly after ipmi_msghandler module is removed we can end up in a situation where the module is removed fist and when the work is executed the system crashes with : BUG: unable to handle page fault for address: ffffffffc05c3450 PF: supervisor instruction fetch in kernel mode PF: error_code(0x0010) - not-present page because the pages of the module are gone. In cleanup_ipmi() there is no easy way to detect if there are any pending works to flush them before removing the module. This patch creates a separate workqueue and schedules the remove_work works on it. When removing the module the workqueue is drained when destroyed to avoid the race. [1] https://bugs.launchpad.net/bugs/1950666 Cc: stable@vger.kernel.org # 5.1 Fixes: 3b9a907223d7 (ipmi: fix sleep-in-atomic in free_user at cleanup SRCU user->release_barrier) Signed-off-by: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com> Message-Id: <20211115131645.25116-1-ioanna-maria.alifieraki@canonical.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08rt2x00: do not mark device gone on EPROTO errors during startStanislaw Gruszka1-0/+3
commit ed53ae75693096f1c10b4561edd31a07b631bd72 upstream. As reported by Exuvo is possible that we have lot's of EPROTO errors during device start i.e. firmware load. But after that device works correctly. Hence marking device gone by few EPROTO errors done by commit e383c70474db ("rt2x00: check number of EPROTO errors") caused regression - Exuvo device stop working after kernel update. To fix disable the check during device start. Link: https://lore.kernel.org/linux-wireless/bff7d309-a816-6a75-51b6-5928ef4f7a8c@exuvo.se/ Reported-and-tested-by: Exuvo <exuvo@exuvo.se> Fixes: e383c70474db ("rt2x00: check number of EPROTO errors") Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211111141003.GA134627@wp.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmitStephen Suryaputra1-0/+2
commit ee201011c1e1563c114a55c86eb164b236f18e84 upstream. IPCB/IP6CB need to be initialized when processing outbound v4 or v6 pkts in the codepath of vrf device xmit function so that leftover garbage doesn't cause futher code that uses the CB to incorrectly process the pkt. One occasion of the issue might occur when MPLS route uses the vrf device as the outgoing device such as when the route is added using "ip -f mpls route add <label> dev <vrf>" command. The problems seems to exist since day one. Hence I put the day one commits on the Fixes tags. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Cc: stable@vger.kernel.org Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211130162637.3249-1-ssuryaextr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: ethernet: dec: tulip: de4x5: fix possible array overflows in ↵Teng Qi1-0/+4
type3_infoblock() [ Upstream commit 0fa68da72c3be09e06dd833258ee89c33374195f ] The definition of macro MOTO_SROM_BUG is: #define MOTO_SROM_BUG (lp->active == 8 && (get_unaligned_le32( dev->dev_addr) & 0x00ffffff) == 0x3e0008) and the if statement if (MOTO_SROM_BUG) lp->active = 0; using this macro indicates lp->active could be 8. If lp->active is 8 and the second comparison of this macro is false. lp->active will remain 8 in: lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2; lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2; lp->phy[lp->active].mci = *p; However, the length of array lp->phy is 8, so array overflows can occur. To fix these possible array overflows, we first check lp->active and then return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8). Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Teng Qi <starmiku1207184332@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of ↵zhangyue1-13/+17
bound [ Upstream commit 61217be886b5f7402843677e4be7e7e83de9cb41 ] In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the 'for' end, the 'k' is 8. At this time, the array 'lp->phy[8]' may be out of bound. Signed-off-by: zhangyue <zhangyue1@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in ↵Teng Qi1-0/+4
hns_dsaf_ge_srst_by_port() [ Upstream commit a66998e0fbf213d47d02813b9679426129d0d114 ] The if statement: if (port >= DSAF_GE_NUM) return; limits the value of port less than DSAF_GE_NUM (i.e., 8). However, if the value of port is 6 or 7, an array overflow could occur: port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off; because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6). To fix this possible array overflow, we first check port and if it is greater than or equal to DSAF_MAX_PORT_NUM, the function returns. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Teng Qi <starmiku1207184332@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08ata: libahci: Adjust behavior when StorageD3Enable _DSD is setMario Limonciello1-0/+15
[ Upstream commit 7c5f641a5914ce0303b06bcfcd7674ee64aeebe9 ] The StorageD3Enable _DSD is used for the vendor to indicate that the disk should be opted into or out of a different behavior based upon the platform design. For AMD's Renoir and Green Sardine platforms it's important that any attached SATA storage has transitioned into DevSlp when s2idle is used. If the disk is left in active/partial/slumber, then the system is not able to resume properly. When the StorageD3Enable _DSD is detected, check the system is using s2idle and DevSlp is enabled and if so explicitly wait long enough for the disk to enter DevSlp. Cc: Nehal-bakulchandra Shah <Nehal-bakulchandra.Shah@amd.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214091 Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08ata: ahci: Add Green Sardine vendor ID as board_ahci_mobileMario Limonciello1-0/+1
[ Upstream commit 1527f69204fe35f341cb599f1cb01bd02daf4374 ] AMD requires that the SATA controller be configured for devsleep in order for S0i3 entry to work properly. commit b1a9585cc396 ("ata: ahci: Enable DEVSLP by default on x86 with SLP_S0") sets up a kernel policy to enable devsleep on Intel mobile platforms that are using s0ix. Add the PCI ID for the SATA controller in Green Sardine platforms to extend this policy by default for AMD based systems using s0i3 as well. Cc: Nehal-bakulchandra Shah <Nehal-bakulchandra.Shah@amd.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214091 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08drm/amd/amdgpu: fix potential memleakBernard Zhao1-0/+1
[ Upstream commit 27dfaedc0d321b4ea4e10c53e4679d6911ab17aa ] In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed There is a potential memleak if not call kobject_put. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered againshaoyunl1-0/+5
[ Upstream commit 2cf49e00d40d5132e3d067b5aa6d84791929ab15 ] In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch already been called, the start_cpsch will not be called since there is no resume in this case. When reset been triggered again, driver should avoid to do uninitialization again. Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08drm/amd/pm: Remove artificial freq level on Navi1xLijo Lazar1-5/+8
[ Upstream commit be83a5676767c99c2417083c29d42aa1e109a69d ] Print Navi1x fine grained clocks in a consistent manner with other SOCs. Don't show aritificial DPM level when the current clock equals min or max. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net: usb: r8152: Add MAC passthrough support for more Lenovo DocksAaron Ma1-6/+3
[ Upstream commit f77b83b5bbab53d2be339184838b19ed2c62c0a5 ] Like ThinkaPad Thunderbolt 4 Dock, more Lenovo docks start to use the original Realtek USB ethernet chip ID 0bda:8153. Lenovo Docks always use their own IDs for usb hub, even for older Docks. If parent hub is from Lenovo, then r8152 should try MAC passthrough. Verified on Lenovo TBT3 dock too. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08scsi: iscsi: Unblock session then wake up error handlerMike Christie1-3/+3
[ Upstream commit a0c2f8b6709a9a4af175497ca65f93804f57b248 ] We can race where iscsi_session_recovery_timedout() has woken up the error handler thread and it's now setting the devices to offline, and session_recovery_timedout()'s call to scsi_target_unblock() is also trying to set the device's state to transport-offline. We can then get a mix of states. For the case where we can't relogin we want the devices to be in transport-offline so when we have repaired the connection __iscsi_unblock_session() can set the state back to running. Set the device state then call into libiscsi to wake up the error handler. Link: https://lore.kernel.org/r/20211105221048.6541-2-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08thermal: core: Reset previous low and high trip during thermal zone initManaf Meethalavalappu Pallikunhi1-0/+2
[ Upstream commit 99b63316c39988039965693f5f43d8b4ccb1c86c ] During the suspend is in process, thermal_zone_device_update bails out thermal zone re-evaluation for any sensor trip violation without setting next valid trip to that sensor. It assumes during resume it will re-evaluate same thermal zone and update trip. But when it is in suspend temperature goes down and on resume path while updating thermal zone if temperature is less than previously violated trip, thermal zone set trip function evaluates the same previous high and previous low trip as new high and low trip. Since there is no change in high/low trip, it bails out from thermal zone set trip API without setting any trip. It leads to a case where sensor high trip or low trip is disabled forever even though thermal zone has a valid high or low trip. During thermal zone device init, reset thermal zone previous high and low trip. It resolves above mentioned scenario. Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deepSlark Xiao1-12/+0
[ Upstream commit 39f53292181081d35174a581a98441de5da22bc9 ] When WWAN device wake from S3 deep, under thinkpad platform, WWAN would be disabled. This disable status could be checked by command 'nmcli r wwan' or 'rfkill list'. Issue analysis as below: When host resume from S3 deep, thinkpad_acpi driver would call hotkey_resume() function. Finnaly, it will use wan_get_status to check the current status of WWAN device. During this resume progress, wan_get_status would always return off even WWAN boot up completely. In patch V2, Hans said 'sw_state should be unchanged after a suspend/resume. It's better to drop the tpacpi_rfk_update_swstate call all together from the resume path'. And it's confimed by Lenovo that GWAN is no longer available from WHL generation because the design does not match with current pin control. Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20211108060648.8212-1-slark_xiao@163.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08platform/x86: thinkpad_acpi: Add support for dual fan controlJimmy Wang1-0/+1
[ Upstream commit 1f338954a5fbe21eb22b4223141e31f2a26366d5 ] This adds dual fan control for P1 / X1 Extreme Gen4 Signed-off-by: Jimmy Wang <jimmy221b@163.com> Link: https://lore.kernel.org/r/20211105090528.39677-1-jimmy221b@163.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08platform/x86: dell-wmi-descriptor: disable by defaultThomas Weißschuh1-1/+1
[ Upstream commit 0f07c023dcd08ca49b6d3dd018abc7cd56301478 ] dell-wmi-descriptor only provides symbols to other drivers. These drivers already select dell-wmi-descriptor when needed. This fixes an issue where dell-wmi-descriptor is compiled as a module with localyesconfig on a non-Dell machine. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20211113080551.61860-1-linux@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08pinctrl: qcom: fix unmet dependencies on GPIOLIB for GPIOLIB_IRQCHIPJulian Braha1-0/+2
[ Upstream commit 60430d4c4eddcdf8eac2bdbec9704f84a436eedf ] When PINCTRL_QCOM_SPMI_PMIC or PINCTRL_QCOM_SSBI_PMIC is selected, and GPIOLIB is not selected, Kbuild gives the following warnings: WARNING: unmet direct dependencies detected for GPIOLIB_IRQCHIP Depends on [n]: GPIOLIB [=n] Selected by [y]: - PINCTRL_QCOM_SPMI_PMIC [=y] && PINCTRL [=y] && (ARCH_QCOM [=n] || COMPILE_TEST [=y]) && OF [=y] && SPMI [=y] WARNING: unmet direct dependencies detected for GPIOLIB_IRQCHIP Depends on [n]: GPIOLIB [=n] Selected by [y]: - PINCTRL_QCOM_SSBI_PMIC [=y] && PINCTRL [=y] && (ARCH_QCOM [=n] || COMPILE_TEST [=y]) && OF [=y] This is because these config options enable GPIOLIB_IRQCHIP without selecting or depending on GPIOLIB, despite GPIOLIB_IRQCHIP depending on GPIOLIB. These unmet dependency bugs were detected by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. Signed-off-by: Julian Braha <julianbraha@gmail.com> Link: https://lore.kernel.org/r/20211029004610.35131-1-julianbraha@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08atlantic: Fix OOB read and write in hw_atl_utils_fw_rpc_waitZekun Shen1-0/+10
[ Upstream commit b922f622592af76b57cbc566eaeccda0b31a3496 ] This bug report shows up when running our research tools. The reports is SOOB read, but it seems SOOB write is also possible a few lines below. In details, fw.len and sw.len are inputs coming from io. A len over the size of self->rpc triggers SOOB. The patch fixes the bugs by adding sanity checks. The bugs are triggerable with compromised/malfunctioning devices. They are potentially exploitable given they first leak up to 0xffff bytes and able to overwrite the region later. The patch is tested with QEMU emulater. This is NOT tested with a real device. Attached is the log we found by fuzzing. BUG: KASAN: slab-out-of-bounds in hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] Read of size 4 at addr ffff888016260b08 by task modprobe/213 CPU: 0 PID: 213 Comm: modprobe Not tainted 5.6.0 #1 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] __kasan_report.cold+0x37/0x7c ? aq_hw_read_reg_bit+0x60/0x70 [atlantic] ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] kasan_report+0xe/0x20 hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] hw_atl_utils_fw_rpc_call+0x95/0x130 [atlantic] hw_atl_utils_fw_rpc_wait+0x176/0x210 [atlantic] hw_atl_utils_mpi_create+0x229/0x2e0 [atlantic] ? hw_atl_utils_fw_rpc_wait+0x210/0x210 [atlantic] ? hw_atl_utils_initfw+0x9f/0x1c8 [atlantic] hw_atl_utils_initfw+0x12a/0x1c8 [atlantic] aq_nic_ndev_register+0x88/0x650 [atlantic] ? aq_nic_ndev_init+0x235/0x3c0 [atlantic] aq_pci_probe+0x731/0x9b0 [atlantic] ? aq_pci_func_init+0xc0/0xc0 [atlantic] local_pci_probe+0xd3/0x160 pci_device_probe+0x23f/0x3e0 Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu> Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHYJulian Braha1-0/+1
[ Upstream commit bb162bb2b4394108c8f055d1b115735331205e28 ] When PHY_SUN6I_MIPI_DPHY is selected, and RESET_CONTROLLER is not selected, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for PHY_SUN6I_MIPI_DPHY Depends on [n]: (ARCH_SUNXI [=n] || COMPILE_TEST [=y]) && HAS_IOMEM [=y] && COMMON_CLK [=y] && RESET_CONTROLLER [=n] Selected by [y]: - DRM_SUN6I_DSI [=y] && HAS_IOMEM [=y] && DRM_SUN4I [=y] This is because DRM_SUN6I_DSI selects PHY_SUN6I_MIPI_DPHY without selecting or depending on RESET_CONTROLLER, despite PHY_SUN6I_MIPI_DPHY depending on RESET_CONTROLLER. These unmet dependency bugs were detected by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. v2: Fixed indentation to match the rest of the file. Signed-off-by: Julian Braha <julianbraha@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211109032351.43322-1-julianbraha@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01drm/amdgpu/gfx9: switch to golden tsc registers for renoir+Alex Deucher1-11/+35
commit 53af98c091bc42fd9ec64cfabc40da4e5f3aae93 upstream. Renoir and newer gfx9 APUs have new TSC register that is not part of the gfxoff tile, so it can be read without needing to disable gfx off. Acked-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01drm/amdgpu/gfx10: add wraparound gpu counter check for APUs as wellAlex Deucher1-2/+13
commit 244ee398855df2adc7d3ac5702b58424a5f684cc upstream. Apply the same check we do for dGPUs for APUs as well. Acked-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01firmware: arm_scmi: Fix type error in sensor protocolCristian Marussi1-1/+1
commit bd074e5039ee16d71833a67337e2f6bf5d106b3a upstream. Fix incorrect type error reported by sparse as: drivers/firmware/arm_scmi/sensors.c:640:28: warning: incorrect type in argument 1 (different base types) drivers/firmware/arm_scmi/sensors.c:640:28: expected unsigned int [usertype] val drivers/firmware/arm_scmi/sensors.c:640:28: got restricted __le32 [usertype] Link: https://lore.kernel.org/r/20211115154043.49284-2-cristian.marussi@arm.com Fixes: 7b83c5f410889 ("firmware: arm_scmi: Add SCMI v3.0 sensor configuration support") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01firmware: arm_scmi: Fix type error assignment in voltage protocolCristian Marussi1-1/+1
commit 026d9835b62bba34b7e657a0bfb76717822f9319 upstream. Fix incorrect type assignment error reported by sparse as: drivers/firmware/arm_scmi/voltage.c:159:42: warning: incorrect type in assignment (different base types) drivers/firmware/arm_scmi/voltage.c:159:42: expected restricted __le32 [usertype] level_index drivers/firmware/arm_scmi/voltage.c:159:42: got unsigned int [usertype] desc_index Link: https://lore.kernel.org/r/20211115154043.49284-1-cristian.marussi@arm.com Fixes: 2add5cacff353 ("firmware: arm_scmi: Add voltage domain management protocol support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01vhost/vsock: fix incorrect used length reported to the guestStefano Garzarella1-1/+1
commit 49d8c5ffad07ca014cfae72a1b9b8c52b6ad9cb8 upstream. The "used length" reported by calling vhost_add_used() must be the number of bytes written by the device (using "in" buffers). In vhost_vsock_handle_tx_kick() the device only reads the guest buffers (they are all "out" buffers), without writing anything, so we must pass 0 as "used length" to comply virtio spec. Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Cc: stable@vger.kernel.org Reported-by: Halil Pasic <pasic@linux.ibm.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211122163525.294024-2-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01vdpa_sim: avoid putting an uninitialized iova_domainLongpeng1-2/+5
commit bb93ce4b150dde79f58e34103cbd1fe829796649 upstream. The system will crash if we put an uninitialized iova_domain, this could happen when an error occurs before initializing the iova_domain in vdpasim_create(). BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:__cpuhp_state_remove_instance+0x96/0x1c0 ... Call Trace: <TASK> put_iova_domain+0x29/0x220 vdpasim_free+0xd1/0x120 [vdpa_sim] vdpa_release_dev+0x21/0x40 [vdpa] device_release+0x33/0x90 kobject_release+0x63/0x160 vdpasim_create+0x127/0x2a0 [vdpa_sim] vdpasim_net_dev_add+0x7d/0xfe [vdpa_sim_net] vdpa_nl_cmd_dev_add_set_doit+0xe1/0x1a0 [vdpa] genl_family_rcv_msg_doit+0x112/0x140 genl_rcv_msg+0xdf/0x1d0 ... So we must make sure the iova_domain is already initialized before put it. In addition, we may get the following warning in this case: WARNING: ... drivers/iommu/iova.c:344 iova_cache_put+0x58/0x70 So we must make sure the iova_cache_put() is invoked only if the iova_cache_get() is already invoked. Let's fix it together. Cc: stable@vger.kernel.org Fixes: 4080fc106750 ("vdpa_sim: use iova module to allocate IOVA addresses") Signed-off-by: Longpeng <longpeng2@huawei.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211124015215.119-1-longpeng2@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01iommu/amd: Clarify AMD IOMMUv2 initialization messagesJoerg Roedel1-3/+3
commit 717e88aad37befedfd531378b632e794e24e9afb upstream. The messages printed on the initialization of the AMD IOMMUv2 driver have caused some confusion in the past. Clarify the messages to lower the confusion in the future. Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20211123105507.7654-3-joro@8bytes.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01iommu/vt-d: Fix unmap_pages supportAlex Williamson1-4/+2
[ Upstream commit 86dc40c7ea9c22f64571e0e45f695de73a0e2644 ] When supporting only the .map and .unmap callbacks of iommu_ops, the IOMMU driver can make assumptions about the size and alignment used for mappings based on the driver provided pgsize_bitmap. VT-d previously used essentially PAGE_MASK for this bitmap as any power of two mapping was acceptably filled by native page sizes. However, with the .map_pages and .unmap_pages interface we're now getting page-size and count arguments. If we simply combine these as (page-size * count) and make use of the previous map/unmap functions internally, any size and alignment assumptions are very different. As an example, a given vfio device assignment VM will often create a 4MB mapping at IOVA pfn [0x3fe00 - 0x401ff]. On a system that does not support IOMMU super pages, the unmap_pages interface will ask to unmap 1024 4KB pages at the base IOVA. dma_pte_clear_level() will recurse down to level 2 of the page table where the first half of the pfn range exactly matches the entire pte level. We clear the pte, increment the pfn by the level size, but (oops) the next pte is on a new page, so we exit the loop an pop back up a level. When we then update the pfn based on that higher level, we seem to assume that the previous pfn value was at the start of the level. In this case the level size is 256K pfns, which we add to the base pfn and get a results of 0x7fe00, which is clearly greater than 0x401ff, so we're done. Meanwhile we never cleared the ptes for the remainder of the range. When the VM remaps this range, we're overwriting valid ptes and the VT-d driver complains loudly, as reported by the user report linked below. The fix for this seems relatively simple, if each iteration of the loop in dma_pte_clear_level() is assumed to clear to the end of the level pte page, then our next pfn should be calculated from level_pfn rather than our working pfn. Fixes: 3f34f1259776 ("iommu/vt-d: Implement map/unmap_pages() iommu_ops callback") Reported-by: Ajay Garg <ajaygargnsit@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Link: https://lore.kernel.org/all/20211002124012.18186-1-ajaygargnsit@gmail.com/ Link: https://lore.kernel.org/r/163659074748.1617923.12716161410774184024.stgit@omen Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20211126135556.397932-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01iommu/rockchip: Fix PAGE_DESC_HI_MASKs for RK3568Alex Bee1-2/+2
[ Upstream commit f7ff3cff3527ff1e70cad8d2fe7c0c7b6f83120a ] With the submission of iommu driver for RK3568 a subtle bug was introduced: PAGE_DESC_HI_MASK1 and PAGE_DESC_HI_MASK2 have to be the other way arround - that leads to random errors, especially when addresses beyond 32 bit are used. Fix it. Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2") Signed-off-by: Alex Bee <knaerzche@gmail.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Dan Johansen <strit@manjaro.org> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Link: https://lore.kernel.org/r/20211124021325.858139-1-knaerzche@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: mscc: ocelot: correctly report the timestamping RX filters in ethtoolVladimir Oltean1-1/+4
[ Upstream commit c49a35eedfef08bffd46b53c25dbf9d6016a86ff ] The driver doesn't support RX timestamping for non-PTP packets, but it declares that it does. Restrict the reported RX filters to PTP v2 over L2 and over L4. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: mscc: ocelot: don't downgrade timestamping RX filters in SIOCSHWTSTAMPVladimir Oltean1-6/+0
[ Upstream commit 8a075464d1e9317ffae0973dfe538a7511291a06 ] The ocelot driver, when asked to timestamp all receiving packets, 1588 v1 or NTP, says "nah, here's 1588 v2 for you". According to this discussion: https://patchwork.kernel.org/project/netdevbpf/patch/20211104133204.19757-8-martin.kaistra@linutronix.de/#24577647 drivers that downgrade from a wider request to a narrower response (or even a response where the intersection with the request is empty) are buggy, and should return -ERANGE instead. This patch fixes that. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Suggested-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: hns3: fix incorrect components info of ethtool --reset commandJie Wang1-0/+4
[ Upstream commit 82229c4dbb8a2780f05fa1bab29c97ef7bcd21bb ] Currently, HNS3 driver doesn't clear the reset flags of components after successfully executing reset, it causes userspace info of "Components reset" and "Components not reset" is incorrect. So fix this problem by clear corresponding reset flag after reset process. Fixes: ddccc5e368a3 ("net: hns3: add support for triggering reset by ethtool") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: hns3: fix VF RSS failed problem after PF enable multi-TCsGuangbin Huang1-2/+2
[ Upstream commit 8d2ad993aa05c0768f00c886c9d369cd97a337ac ] When PF is set to multi-TCs and configured mapping relationship between priorities and TCs, the hardware will active these settings for this PF and its VFs. In this case when VF just uses one TC and its rx packets contain priority, and if the priority is not mapped to TC0, as other TCs of VF is not valid, hardware always put this kind of packets to the queue 0. It cause this kind of packets of VF can not be used RSS function. To fix this problem, set tc mode of all unused TCs of VF to the setting of TC0, then rx packet with priority which map to unused TC will be direct to TC0. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: stmmac: Disable Tx queues when reconfiguring the interfaceYannick Vignon1-0/+2
[ Upstream commit b270bfe697367776eca2e6759a71d700fb8d82a2 ] The Tx queues were not disabled in situations where the driver needed to stop the interface to apply a new configuration. This could result in a kernel panic when doing any of the 3 following actions: * reconfiguring the number of queues (ethtool -L) * reconfiguring the size of the ring buffers (ethtool -G) * installing/removing an XDP program (ip l set dev ethX xdp) Prevent the panic by making sure netif_tx_disable is called when stopping an interface. Without this patch, the following kernel panic can be observed when doing any of the actions above: Unable to handle kernel paging request at virtual address ffff80001238d040 [....] Call trace: dwmac4_set_addr+0x8/0x10 dev_hard_start_xmit+0xe4/0x1ac sch_direct_xmit+0xe8/0x39c __dev_queue_xmit+0x3ec/0xaf0 dev_queue_xmit+0x14/0x20 [...] [ end trace 0000000000000002 ]--- Fixes: 5fabb01207a2d ("net: stmmac: Add initial XDP support") Fixes: aa042f60e4961 ("net: stmmac: Add support to Ethtool get/set ring parameters") Fixes: 0366f7e06a6be ("net: stmmac: add ethtool support for get/set channels") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Link: https://lore.kernel.org/r/20211124154731.1676949-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01igb: fix netpoll exit with trafficJesse Brandeburg1-1/+1
[ Upstream commit eaeace60778e524a2820d0c0ad60bf80289e292c ] Oleksandr brought a bug report where netpoll causes trace messages in the log on igb. Danielle brought this back up as still occurring, so we'll try again. [22038.710800] ------------[ cut here ]------------ [22038.710801] igb_poll+0x0/0x1440 [igb] exceeded budget in poll [22038.710802] WARNING: CPU: 12 PID: 40362 at net/core/netpoll.c:155 netpoll_poll_dev+0x18a/0x1a0 As Alex suggested, change the driver to return work_done at the exit of napi_poll, which should be safe to do in this driver because it is not polling multiple queues in this single napi context (multiple queues attached to one MSI-X vector). Several other drivers contain the same simple sequence, so I hope this will not create new problems. Fixes: 16eb8815c235 ("igb: Refactor clean_rx_irq to reduce overhead and improve performance") Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Danielle Ratson <danieller@nvidia.com> Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Danielle Ratson <danieller@nvidia.com> Link: https://lore.kernel.org/r/20211123204000.1597971-1-jesse.brandeburg@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01nvmet: use IOCB_NOWAIT only if the filesystem supports itMaurizio Lombardi1-1/+3
[ Upstream commit c024b226a417c4eb9353ff500b1c823165d4d508 ] Submit I/O requests with the IOCB_NOWAIT flag set only if the underlying filesystem supports it. Fixes: 50a909db36f2 ("nvmet: use IOCB_NOWAIT for file-ns buffered I/O") Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: phylink: Force retrigger in case of latched link-fail indicatorRussell King (Oracle)1-0/+13
[ Upstream commit dbae3388ea9ca33bd1d5eabc3b0ef17e69c74677 ] On mv88e6xxx 1G/2.5G PCS, the SerDes register 4.2001.2 has the following description: This register bit indicates when link was lost since the last read. For the current link status, read this register back-to-back. Thus to get current link state, we need to read the register twice. But doing that in the link change interrupt handler would lead to potentially ignoring link down events, which we really want to avoid. Thus this needs to be solved in phylink's resolve, by retriggering another resolve in the event when PCS reports link down and previous link was up, and by re-reading PCS state if the previous link was down. The wrong value is read when phylink requests change from sgmii to 2500base-x mode, and link won't come up. This fixes the bug. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: phylink: Force link down and retrigger resolve on interface changeRussell King (Oracle)1-1/+12
[ Upstream commit 80662f4fd4771bc9c7cc4abdfbe866ebd1179621 ] On PHY state change the phylink_resolve() function can read stale information from the MAC and report incorrect link speed and duplex to the kernel message log. Example with a Marvell 88X3310 PHY connected to a SerDes port on Marvell 88E6393X switch: - PHY driver triggers state change due to PHY interface mode being changed from 10gbase-r to 2500base-x due to copper change in speed from 10Gbps to 2.5Gbps, but the PHY itself either hasn't yet changed its interface to the host, or the interrupt about loss of SerDes link hadn't arrived yet (there can be a delay of several milliseconds for this), so we still think that the 10gbase-r mode is up - phylink_resolve() - phylink_mac_pcs_get_state() - this fills in speed=10g link=up - interface mode is updated to 2500base-x but speed is left at 10Gbps - phylink_major_config() - interface is changed to 2500base-x - phylink_link_up() - mv88e6xxx_mac_link_up() - .port_set_speed_duplex() - speed is set to 10Gbps - reports "Link is Up - 10Gbps/Full" to dmesg Afterwards when the interrupt finally arrives for mv88e6xxx, another resolve is forced in which we get the correct speed from phylink_mac_pcs_get_state(), but since the interface is not being changed anymore, we don't call phylink_major_config() but only phylink_mac_config(), which does not set speed/duplex anymore. To fix this, we need to force the link down and trigger another resolve on PHY interface change event. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01lan743x: fix deadlock in lan743x_phy_link_status_change()Heiner Kallweit1-9/+3
[ Upstream commit ddb826c2c92d461f290a7bab89e7c28696191875 ] Usage of phy_ethtool_get_link_ksettings() in the link status change handler isn't needed, and in combination with the referenced change it results in a deadlock. Simply remove the call and replace it with direct access to phydev->speed. The duplex argument of lan743x_phy_update_flowcontrol() isn't used and can be removed. Fixes: c10a485c3de5 ("phy: phy_ethtool_ksettings_get: Lock the phy for consistency") Reported-by: Alessandro B Maurici <abmaurici@gmail.com> Tested-by: Alessandro B Maurici <abmaurici@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/40e27f76-0ba3-dcef-ee32-a78b9df38b0f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01drm/amd/display: Set plane update flags for all planes in resetNicholas Kazlauskas1-2/+2
[ Upstream commit 21431f70f6014f81b0d118ff4fcee12b00b9dd70 ] [Why] We're only setting the flags on stream[0]'s planes so this logic fails if we have more than one stream in the state. This can cause a page flip timeout with multiple displays in the configuration. [How] Index into the stream_status array using the stream index - it's a 1:1 mapping. Fixes: cdaae8371aa9 ("drm/amd/display: Handle GPU reset for DC block") Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01drm/amd/display: Fix DPIA outbox timeout after GPU resetNicholas Kazlauskas1-0/+2
[ Upstream commit 6eff272dbee7ad444c491c9a96d49e78e91e2161 ] [Why] The HW interrupt gets disabled after GPU reset so we don't receive notifications for HPD or AUX from DMUB - leading to timeout and black screen with (or without) DPIA links connected. [How] Re-enable the interrupt after GPU reset like we do for the other DC interrupts. Fixes: 81927e2808be ("drm/amd/display: Support for DMUB AUX") Reviewed-by: Jude Shih <Jude.Shih@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-08 02:24:16 +0300