summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-12-14can: m_can: pci: fix iomap_read_fifo() and iomap_write_fifo()Matthias Schiffer1-2/+12
commit d737de2d7cc3efdacbf17d4e22efc75697bd76d9 upstream. The same fix that was previously done in m_can_platform in commit 99d173fbe894 ("can: m_can: fix iomap_read_fifo() and iomap_write_fifo()") is required in m_can_pci as well to make iomap_read_fifo() and iomap_write_fifo() work for val_count > 1. Fixes: 812270e5445b ("can: m_can: Batch FIFO writes during CAN transmit") Fixes: 1aa6772f64b4 ("can: m_can: Batch FIFO reads during CAN receive") Link: https://lore.kernel.org/all/20211118144011.10921-1-matthias.schiffer@ew.tq-group.com Cc: stable@vger.kernel.org Cc: Matt Kline <matt@bitbashing.io> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14can: m_can: pci: fix incorrect reference clock rateMatthias Schiffer1-1/+1
commit 8c03b8bff765ac4146342ef90931bb50e788c758 upstream. When testing the CAN controller on our Ekhart Lake hardware, we determined that all communication was running with twice the configured bitrate. Changing the reference clock rate from 100MHz to 200MHz fixed this. Intel's support has confirmed to us that 200MHz is indeed the correct clock rate. Fixes: cab7ffc0324f ("can: m_can: add PCI glue driver for Intel Elkhart Lake") Link: https://lore.kernel.org/all/c9cf3995f45c363e432b3ae8eb1275e54f009fc8.1636967198.git.matthias.schiffer@ew.tq-group.com Cc: stable@vger.kernel.org Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14can: m_can: m_can_read_fifo: fix memory leak in error branchVincent Mailhol1-1/+3
commit 31cb32a590d62b18f69a9a6d433f4e69c74fdd56 upstream. In m_can_read_fifo(), if the second call to m_can_fifo_read() fails, the function jump to the out_fail label and returns without calling m_can_receive_skb(). This means that the skb previously allocated by alloc_can_skb() is not freed. In other terms, this is a memory leak. This patch adds a goto label to destroy the skb if an error occurs. Issue was found with GCC -fanalyzer, please follow the link below for details. Fixes: e39381770ec9 ("can: m_can: Disable IRQs on FIFO bus errors") Link: https://lore.kernel.org/all/20211107050755.70655-1-mailhol.vincent@wanadoo.fr Cc: stable@vger.kernel.org Cc: Matt Kline <matt@bitbashing.io> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14can: pch_can: pch_can_rx_normal: fix use after freeVincent Mailhol1-1/+1
commit 94cddf1e9227a171b27292509d59691819c458db upstream. After calling netif_receive_skb(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is dereferenced just after the call netif_receive_skb(skb). Reordering the lines solves the issue. Fixes: b21d18b51b31 ("can: Topcliff: Add PCH_CAN driver.") Link: https://lore.kernel.org/all/20211123111654.621610-1-mailhol.vincent@wanadoo.fr Cc: stable@vger.kernel.org Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14can: sja1000: fix use after free in ems_pcmcia_add_card()Dan Carpenter1-1/+6
commit 3ec6ca6b1a8e64389f0212b5a1b0f6fed1909e45 upstream. If the last channel is not available then "dev" is freed. Fortunately, we can just use "pdev->irq" instead. Also we should check if at least one channel was set up. Fixes: fd734c6f25ae ("can/sja1000: add driver for EMS PCMCIA card") Link: https://lore.kernel.org/all/20211124145041.GB13656@kili Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct ↵Jimmy Assarsson1-1/+7
stats->{rx,tx}_errors counter commit 36aea60fc892ce73f96d45dc7eb239c7c4c1fa69 upstream. Check the direction bit in the error frame packet (EPACK) to determine which net_device_stats {rx,tx}_errors counter to increase. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Link: https://lore.kernel.org/all/20211208152122.250852-1-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14can: kvaser_usb: get CAN clock frequency from deviceJimmy Assarsson1-28/+73
commit fb12797ab1fef480ad8a32a30984844444eeb00d upstream. The CAN clock frequency is used when calculating the CAN bittiming parameters. When wrong clock frequency is used, the device may end up with wrong bittiming parameters, depending on user requested bittiming parameters. To avoid this, get the CAN clock frequency from the device. Various existing Kvaser Leaf products use different CAN clocks. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Link: https://lore.kernel.org/all/20211208152122.250852-2-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14IB/hfi1: Fix leak of rcvhdrtail_dummy_kvaddrMike Marciniszyn1-19/+14
commit 60a8b5a1611b4a26de4839ab9c1fc2a9cf3e17c1 upstream. This buffer is currently allocated in hfi1_init(): if (reinit) ret = init_after_reset(dd); else ret = loadtime_init(dd); if (ret) goto done; /* allocate dummy tail memory for all receive contexts */ dd->rcvhdrtail_dummy_kvaddr = dma_alloc_coherent(&dd->pcidev->dev, sizeof(u64), &dd->rcvhdrtail_dummy_dma, GFP_KERNEL); if (!dd->rcvhdrtail_dummy_kvaddr) { dd_dev_err(dd, "cannot allocate dummy tail memory\n"); ret = -ENOMEM; goto done; } The reinit triggered path will overwrite the old allocation and leak it. Fix by moving the allocation to hfi1_alloc_devdata() and the deallocation to hfi1_free_devdata(). Link: https://lore.kernel.org/r/20211129192008.101968.91302.stgit@awfm-01.cornelisnetworks.com Cc: stable@vger.kernel.org Fixes: 46b010d3eeb8 ("staging/rdma/hfi1: Workaround to prevent corruption during packet delivery") Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14IB/hfi1: Fix early init panicMike Marciniszyn3-3/+6
commit f6a3cfec3c01f9983e961c3327cef0db129a3c43 upstream. The following trace can be observed with an init failure such as firmware load failures: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 0 PID: 537 Comm: kworker/0:3 Tainted: G OE --------- - - 4.18.0-240.el8.x86_64 #1 Workqueue: events work_for_cpu_fn RIP: 0010:0x0 Code: Bad RIP value. RSP: 0000:ffffae5f878a3c98 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff95e48e025c00 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff95e48e025c00 RBP: ffff95e4bf3660a4 R08: 0000000000000000 R09: ffffffff86d5e100 R10: ffff95e49e1de600 R11: 0000000000000001 R12: ffff95e4bf366180 R13: ffff95e48e025c00 R14: ffff95e4bf366028 R15: ffff95e4bf366000 FS: 0000000000000000(0000) GS:ffff95e4df200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000f86a0a003 CR4: 00000000001606f0 Call Trace: receive_context_interrupt+0x1f/0x40 [hfi1] __free_irq+0x201/0x300 free_irq+0x2e/0x60 pci_free_irq+0x18/0x30 msix_free_irq.part.2+0x46/0x80 [hfi1] msix_clean_up_interrupts+0x2b/0x70 [hfi1] hfi1_init_dd+0x640/0x1a90 [hfi1] do_init_one.isra.19+0x34d/0x680 [hfi1] local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x35/0x40 The free_irq() results in a callback to the registered interrupt handler, and rcd->do_interrupt is NULL because the receive context data structures are not fully initialized. Fix by ensuring that the do_interrupt is always assigned and adding a guards in the slow path handler to detect and handle a partially initialized receive context and noop the receive. Link: https://lore.kernel.org/r/20211129192003.101968.33612.stgit@awfm-01.cornelisnetworks.com Cc: stable@vger.kernel.org Fixes: b0ba3c18d6bf ("IB/hfi1: Move normal functions from hfi1_devdata to const array") Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14IB/hfi1: Insure use of smp_processor_id() is preempt disabledMike Marciniszyn1-1/+1
commit b6d57e24ce6cc3df8a8845e1b193e88a65d501b1 upstream. The following BUG has just surfaced with our 5.16 testing: BUG: using smp_processor_id() in preemptible [00000000] code: mpicheck/1581081 caller is sdma_select_user_engine+0x72/0x210 [hfi1] CPU: 0 PID: 1581081 Comm: mpicheck Tainted: G S 5.16.0-rc1+ #1 Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0016.033120161139 03/31/2016 Call Trace: <TASK> dump_stack_lvl+0x33/0x42 check_preemption_disabled+0xbf/0xe0 sdma_select_user_engine+0x72/0x210 [hfi1] ? _raw_spin_unlock_irqrestore+0x1f/0x31 ? hfi1_mmu_rb_insert+0x6b/0x200 [hfi1] hfi1_user_sdma_process_request+0xa02/0x1120 [hfi1] ? hfi1_write_iter+0xb8/0x200 [hfi1] hfi1_write_iter+0xb8/0x200 [hfi1] do_iter_readv_writev+0x163/0x1c0 do_iter_write+0x80/0x1c0 vfs_writev+0x88/0x1a0 ? recalibrate_cpu_khz+0x10/0x10 ? ktime_get+0x3e/0xa0 ? __fget_files+0x66/0xa0 do_writev+0x65/0x100 do_syscall_64+0x3a/0x80 Fix this long standing bug by moving the smp_processor_id() to after the rcu_read_lock(). The rcu_read_lock() implicitly disables preemption. Link: https://lore.kernel.org/r/20211129191958.101968.87329.stgit@awfm-01.cornelisnetworks.com Cc: stable@vger.kernel.org Fixes: 0cb2aa690c7e ("IB/hfi1: Add sysfs interface for affinity setup") Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14platform/x86/intel: hid: add quirk to support Surface Go 3Alex Hung1-0/+7
commit 7d0c009043f6a970f62dbf5aecda9f8c3ccafcff upstream. Similar to other systems Surface Go 3 requires a DMI quirk to enable 5 button array for power and volume buttons. Buglink: https://github.com/linux-surface/linux-surface/issues/595 Cc: stable@vger.kernel.org Signed-off-by: Alex Hung <alex.hung@canonical.com> Link: https://lore.kernel.org/r/20211203212810.2666508-1-alex.hung@canonical.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: Ignore battery for Elan touchscreen on Asus UX550VEHans de Goede2-0/+3
commit 14902f8961dca9c66bf190f7b1583767c97a4197 upstream. Battery status is reported for the Asus UX550VE touchscreen even though it does not have a battery. Prevent it from always reporting the battery as low. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1897823 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: sony: fix error path in probeBenjamin Tissoires1-7/+15
commit 7998193bccc1c6e1537c5f3880fd0d5b949ec9d1 upstream. When the setup of the GHL fails, we are not calling hid_hw_stop(). This leads to the hidraw node not being released, meaning a crash whenever somebody attempts to open the file. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20211202095334.14399-2-benjamin.tissoires@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14mmc: spi: Add device-tree SPI IDsJon Hunter1-0/+7
commit 5f719948b5d43eb39356e94e8d0b462568915381 upstream. Commit 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible") added a test to check that every SPI driver has a spi_device_id for each DT compatiable string defined by the driver and warns if the spi_device_id is missing. The spi_device_id is missing for the MMC SPI driver and the following warning is now seen. WARNING KERN SPI driver mmc_spi has no spi_device_id for mmc-spi-slot Fix this by adding the necessary spi_device_id. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20211115113813.238044-1-jonathanh@nvidia.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14mtd: dataflash: Add device-tree SPI IDsJon Hunter1-0/+8
commit 27a030e8729255b2068f35c1cd609b532b263311 upstream. Commit 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible") added a test to check that every SPI driver has a spi_device_id for each DT compatiable string defined by the driver and warns if the spi_device_id is missing. The spi_device_ids are missing for the dataflash driver and the following warnings are now seen. WARNING KERN SPI driver mtd_dataflash has no spi_device_id for atmel,at45 WARNING KERN SPI driver mtd_dataflash has no spi_device_id for atmel,dataflash Fix this by adding the necessary spi_device_ids. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211130112443.107730-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: check for valid USB device for many HID driversGreg Kroah-Hartman23-9/+92
commit 93020953d0fa7035fd036ad87a47ae2b7aa4ae33 upstream. Many HID drivers assume that the HID device assigned to them is a USB device as that was the only way HID devices used to be able to be created in Linux. However, with the additional ways that HID devices can be created for many different bus types, that is no longer true, so properly check that we have a USB device associated with the HID device before allowing a driver that makes this assumption to claim it. Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Michael Zaidman <michael.zaidman@gmail.com> Cc: Stefan Achatz <erazor_de@users.sourceforge.net> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: linux-input@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [bentiss: amended for thrustmater.c hunk to apply] Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211201183503.2373082-3-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: wacom: fix problems when device is not a valid USB deviceGreg Kroah-Hartman1-5/+12
commit 720ac467204a70308bd687927ed475afb904e11b upstream. The wacom driver accepts devices of more than just USB types, but some code paths can cause problems if the device being controlled is not a USB device due to a lack of checking. Add the needed checks to ensure that the USB device accesses are only happening on a "real" USB device, and not one on some other bus. Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: linux-input@vger.kernel.org Cc: stable@vger.kernel.org Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211201183503.2373082-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: bigbenff: prevent null pointer dereferenceBenjamin Tissoires1-1/+1
commit 918aa1ef104d286d16b9e7ef139a463ac7a296f0 upstream. When emulating the device through uhid, there is a chance we don't have output reports and so report_field is null. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20211202095334.14399-3-benjamin.tissoires@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: add USB_HID dependancy on some USB HID driversGreg Kroah-Hartman1-3/+3
commit f237d9028f844a86955fc9da59d7ac4a5c55d7d5 upstream. Some HID drivers are only for USB drivers, yet did not depend on CONFIG_USB_HID. This was hidden by the fact that the USB functions were stubbed out in the past, but now that drivers are checking for USB devices properly, build errors can occur with some random configurations. Reported-by: kernel test robot <lkp@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211202114819.2511954-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: add USB_HID dependancy to hid-chiconyGreg Kroah-Hartman1-1/+1
commit d080811f27936f712f619f847389f403ac873b8f upstream. The chicony HID driver only controls USB devices, yet did not have a dependancy on USB_HID. This causes build errors on some configurations like sparc when building due to new changes to the chicony driver. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: stable@vger.kernel.org Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211203075927.2829218-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: add USB_HID dependancy to hid-prodikeysGreg Kroah-Hartman1-1/+1
commit 30cb3c2ad24b66fb7639a6d1f4390c74d6e68f94 upstream. The prodikeys HID driver only controls USB devices, yet did not have a dependancy on USB_HID. This causes build errors on some configurations like nios2 when building due to new changes to the prodikeys driver. Reported-by: kernel test robot <lkp@intel.com> Cc: stable@vger.kernel.org Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211203081231.2856936-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: add hid_is_usb() function to make it simpler for USB detectionGreg Kroah-Hartman5-9/+6
commit f83baa0cb6cfc92ebaf7f9d3a99d7e34f2e77a8a upstream. A number of HID drivers already call hid_is_using_ll_driver() but only for the detection of if this is a USB device or not. Make this more obvious by creating hid_is_usb() and calling the function that way. Also converts the existing hid_is_using_ll_driver() functions to use the new call. Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: linux-input@vger.kernel.org Cc: stable@vger.kernel.org Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211201183503.2373082-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: intel-ish-hid: ipc: only enable IRQ wakeup when requestedThomas Weißschuh1-2/+4
commit 086e81f6b90e41a07a1a885bb11e93daa6915747 upstream. Fixes spurious wakeups from s0ix on Lenovo ThinkPad X1 Cargon Gen 9 on lid close. These wakeups are generated by interrupts from the ISH on changes to the lid status. By disabling the wake IRQ from the ISH we inhibit these spurious wakeups while keeping the resume from LID open through the ACPI interrupt. Reports on the Lenovo forums indicate that Lenovo ThinkPad X1 Yoga Gen6 is also affected. Fixes: ae02e5d40d5f ("HID: intel-ish-hid: ipc layer") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214855 Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211130060117.3026-1-linux@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: google: add eel USB idxiazhengqiao2-0/+3
commit caff009098e6cf59fd6ac21c3a3befcc854978b4 upstream. Add one additional hammer-like device. Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211203030119.28612-1-xiazhengqiao@huaqin.corp-partner.google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: quirks: Add quirk for the Microsoft Surface 3 type-coverHans de Goede2-0/+2
commit 9003fbe0f3674b972f56fa7e6bf3ac9dbfc4d0ec upstream. Add a HID_QUIRK_NO_INIT_REPORTS quirk for the Microsoft Surface 3 (non pro) type-cover. Trying to init the reports seems to confuse the type-cover and causes 2 issues: 1. Despite hid-multitouch sending the command to switch the touchpad to multitouch mode, it keeps sending events on the mouse emulation interface. 2. The touchpad completely stops sending events after a reboot. Adding the HID_QUIRK_NO_INIT_REPORTS quirk fixes both issues. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14usb: gadget: uvc: fix multiple opensThomas Haemmerle2-7/+44
commit 72ee48ee8925446eaeda8e4ef3f2eb16b4a93d2a upstream. Currently, the UVC function is activated when open on the corresponding v4l2 device is called. On another open the activation of the function fails since the deactivation counter in `usb_function_activate` equals 0. However the error is not returned to userspace since the open of the v4l2 device is successful. On a close the function is deactivated (since deactivation counter still equals 0) and the video is disabled in `uvc_v4l2_release`, although the UVC application potentially is streaming. Move activation of UVC function to subscription on UVC_EVENT_SETUP because there we can guarantee for a userspace application utilizing UVC. Block subscription on UVC_EVENT_SETUP while another application already is subscribed to it, indicated by `bool func_connected` in `struct uvc_device`. Extend the `struct uvc_file_handle` with member `bool is_uvc_app_handle` to tag it as the handle used by the userspace UVC application. With this a process is able to check capabilities of the v4l2 device without deactivating the function for the actual UVC application. Reviewed-By: Michael Tretter <m.tretter@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Thomas Haemmerle <thomas.haemmerle@wolfvision.net> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/20211003201355.24081-1-m.grzeschik@pengutronix.de Cc: Dan Vacura <W36195@motorola.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08ipmi: msghandler: Make symbol 'remove_work_wq' staticWei Yongjun1-1/+1
commit 5a3ba99b62d8486de0316334e72ac620d4b94fdd upstream. The sparse tool complains as follows: drivers/char/ipmi/ipmi_msghandler.c:194:25: warning: symbol 'remove_work_wq' was not declared. Should it be static? This symbol is not used outside of ipmi_msghandler.c, so marks it static. Fixes: 1d49eb91e86e ("ipmi: Move remove_work to dedicated workqueue") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Message-Id: <20211123083618.2366808-1-weiyongjun1@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08serial: liteuart: fix minor-number leak on probe errorsJohan Hovold1-3/+14
commit dd5e90b16cca8a697cbe17b72e2a5f49291cabb2 upstream. Make sure to release the allocated minor number before returning on probe errors. Fixes: 1da81e5562fa ("drivers/tty/serial: add LiteUART driver") Cc: stable@vger.kernel.org # 5.11 Cc: Filip Kokosinski <fkokosinski@antmicro.com> Cc: Mateusz Holenko <mholenko@antmicro.com> Reviewed-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211117100512.5058-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08serial: liteuart: fix use-after-free and memleak on unbindJohan Hovold1-0/+1
commit 05f929b395dec8957b636ff14e66b277ed022ed9 upstream. Deregister the port when unbinding the driver to prevent it from being used after releasing the driver data and leaking memory allocated by serial core. Fixes: 1da81e5562fa ("drivers/tty/serial: add LiteUART driver") Cc: stable@vger.kernel.org # 5.11 Cc: Filip Kokosinski <fkokosinski@antmicro.com> Cc: Mateusz Holenko <mholenko@antmicro.com> Reviewed-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211117100512.5058-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08serial: liteuart: Fix NULL pointer dereference in ->remove()Ilia Sergachev1-0/+2
commit 0f55f89d98c8b3e12b4f55f71c127a173e29557c upstream. drvdata has to be set in _probe() - otherwise platform_get_drvdata() causes null pointer dereference BUG in _remove(). Fixes: 1da81e5562fa ("drivers/tty/serial: add LiteUART driver") Cc: stable <stable@vger.kernel.org> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ilia Sergachev <silia@ethz.ch> Link: https://lore.kernel.org/r/20211115224944.23f8c12b@dtkw Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08serial: 8250: Fix RTS modem control while in rs485 modeLukas Wunner2-7/+5
commit f85e04503f369b3f2be28c83fc48b74e19936ebc upstream. Commit f45709df7731 ("serial: 8250: Don't touch RTS modem control while in rs485 mode") sought to prevent user space from interfering with rs485 communication by ignoring a TIOCMSET ioctl() which changes RTS polarity. It did so in serial8250_do_set_mctrl(), which turns out to be too deep in the call stack: When a uart_port is opened, RTS polarity is set by the rs485-aware function uart_port_dtr_rts(). It calls down to serial8250_do_set_mctrl() and that particular RTS polarity change should *not* be ignored. The user-visible result is that on 8250_omap ports which use rs485 with inverse polarity (RTS bit in MCR register is 1 to receive, 0 to send), a newly opened port initially sets up RTS for sending instead of receiving. That's because omap_8250_startup() sets the cached value up->mcr to 0 and omap_8250_restore_regs() subsequently writes it to the MCR register. Due to the commit, serial8250_do_set_mctrl() preserves that incorrect register value: do_sys_openat2 do_filp_open path_openat vfs_open do_dentry_open chrdev_open tty_open uart_open tty_port_open uart_port_activate uart_startup uart_port_startup serial8250_startup omap_8250_startup # up->mcr = 0 uart_change_speed serial8250_set_termios omap_8250_set_termios omap_8250_restore_regs serial8250_out_MCR # up->mcr written tty_port_block_til_ready uart_dtr_rts uart_port_dtr_rts serial8250_set_mctrl omap8250_set_mctrl serial8250_do_set_mctrl # mcr[1] = 1 ignored Fix by intercepting RTS changes from user space in uart_tiocmset() instead. Link: https://lore.kernel.org/linux-serial/20211027111644.1996921-1-baocheng.su@siemens.com/ Fixes: f45709df7731 ("serial: 8250: Don't touch RTS modem control while in rs485 mode") Cc: Chao Zeng <chao.zeng@siemens.com> Cc: stable@vger.kernel.org # v5.7+ Reported-by: Su Bao Cheng <baocheng.su@siemens.com> Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Tested-by: Su Bao Cheng <baocheng.su@siemens.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/21170e622a1aaf842a50b32146008b5374b3dd1d.1637596432.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08serial: 8250_pci: rewrite pericom_do_set_divisor()Jay Dolan1-13/+17
commit bb1201d4b38ec67bd9a871cf86b0cc10f28b15b5 upstream. Have pericom_do_set_divisor() use the uartclk instead of a hard coded value to work with different speed crystals. Tested with 14.7456 and 24 MHz crystals. Have pericom_do_set_divisor() always calculate the divisor rather than call serial8250_do_set_divisor() for rates below baud_base. Do not write registers or call serial8250_do_set_divisor() if valid divisors could not be found. Fixes: 6bf4e42f1d19 ("serial: 8250: Add support for higher baud rates to Pericom chips") Cc: stable <stable@vger.kernel.org> Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211122120604.3909-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08serial: 8250_pci: Fix ACCES entries in pci_serial_quirks arrayJay Dolan1-1/+8
commit c525c5d2437f93520388920baac6d9340c65d239 upstream. Fix error in table for PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S that caused it and PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4 to be missing their fourth port. Fixes: 78d3820b9bd3 ("serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211122120604.3909-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08serial: core: fix transmit-buffer reset and memleakJohan Hovold1-1/+12
commit 00de977f9e0aa9760d9a79d1e41ff780f74e3424 upstream. Commit 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") converted serial core to use tty_port_close() but failed to notice that the transmit buffer still needs to be freed on final close. Not freeing the transmit buffer means that the buffer is no longer cleared on next open so that any ioctl() waiting for the buffer to drain might wait indefinitely (e.g. on termios changes) or that stale data can end up being transmitted in case tx is restarted. Furthermore, the buffer of any port that has been opened would leak on driver unbind. Note that the port lock is held when clearing the buffer pointer due to the ldisc race worked around by commit a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()"). Also note that the tty-port shutdown() callback is not called for console ports so it is not strictly necessary to free the buffer page after releasing the lock (cf. d72402145ace ("tty/serial: do not free trasnmit buffer page under port lock")). Link: https://lore.kernel.org/r/319321886d97c456203d5c6a576a5480d07c3478.1635781688.git.baruch@tkos.co.il Fixes: 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") Cc: stable@vger.kernel.org # 4.9 Cc: Rob Herring <robh@kernel.org> Reported-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211108085431.12637-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30Patrik John1-2/+2
commit b40de7469ef135161c80af0e8c462298cc5dac00 upstream. The current implementation uses 0 as lower limit for the baud rate tolerance for tegra20 and tegra30 chips which causes isses on UART initialization as soon as baud rate clock is lower than required even when within the standard UART tolerance of +/- 4%. This fix aligns the implementation with the initial commit description of +/- 4% tolerance for tegra chips other than tegra186 and tegra194. Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors") Cc: stable <stable@vger.kernel.org> Signed-off-by: Patrik John <patrik.john@u-blox.com> Link: https://lore.kernel.org/r/sig.19614244f8.20211123132737.88341-1-patrik.john@u-blox.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08serial: pl011: Add ACPI SBSA UART match idPierre Gondois1-0/+1
commit ac442a077acf9a6bf1db4320ec0c3f303be092b3 upstream. The document 'ACPI for Arm Components 1.0' defines the following _HID mappings: -'Prime cell UART (PL011)': ARMH0011 -'SBSA UART': ARMHB000 Use the sbsa-uart driver when a device is described with the 'ARMHB000' _HID. Note: PL011 devices currently use the sbsa-uart driver instead of the uart-pl011 driver. Indeed, PL011 devices are not bound to a clock in ACPI. It is not possible to change their baudrate. Cc: <stable@vger.kernel.org> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Link: https://lore.kernel.org/r/20211109172248.19061-1-Pierre.Gondois@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08tty: serial: msm_serial: Deactivate RX DMA for polling supportSven Eckelmann1-0/+3
commit 7492ffc90fa126afb67d4392d56cb4134780194a upstream. The CONSOLE_POLLING mode is used for tools like k(g)db. In this kind of setup, it is often sharing a serial device with the normal system console. This is usually no problem because the polling helpers can consume input values directly (when in kgdb context) and the normal Linux handlers can only consume new input values after kgdb switched back. This is not true anymore when RX DMA is enabled for UARTDM controllers. Single input values can no longer be received correctly. Instead following seems to happen: * on 1. input, some old input is read (continuously) * on 2. input, two old inputs are read (continuously) * on 3. input, three old input values are read (continuously) * on 4. input, 4 previous inputs are received This repeats then for each group of 4 input values. This behavior changes slightly depending on what state the controller was when the first input was received. But this makes working with kgdb basically impossible because control messages are always corrupted when kgdboc tries to parse them. RX DMA should therefore be off when CONSOLE_POLLING is enabled to avoid these kind of problems. No such problem was noticed for TX DMA. Fixes: 99693945013a ("tty: serial: msm: Add RX DMA support") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Link: https://lore.kernel.org/r/20211113121050.7266-1-sven@narfation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()Zhou Qingyang1-0/+3
commit 37307f7020ab38dde0892a578249bf63d00bca64 upstream. In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable <stable@vger.kernel.org> Acked-by: Pawel Laszczak <pawell@cadence.com> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130172700.206650-1-zhou1615@umn.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08usb: cdns3: gadget: fix new urb never complete if ep cancel previous requestsFrank Li1-16/+4
commit 387c2b6ba197c6df28e75359f7d892f7c8dec204 upstream. This issue was found at android12 MTP. 1. MTP submit many out urb request. 2. Cancel left requests (>20) when enough data get from host 3. Send ACK by IN endpoint. 4. MTP submit new out urb request. 5. 4's urb never complete. TRACE LOG: MtpServer-2157 [000] d..3 1287.150391: cdns3_ep_dequeue: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -115, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:1 SID: 0 MtpServer-2157 [000] d..3 1287.150410: cdns3_gadget_giveback: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -104, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:0 SID: 0 MtpServer-2157 [000] d..3 1287.150433: cdns3_ep_dequeue: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -115, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:1 SID: 0 MtpServer-2157 [000] d..3 1287.150446: cdns3_gadget_giveback: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -104, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:0 SID: 0 .... MtpServer-2157 [000] d..1 1293.630410: cdns3_alloc_request: ep1out: req: 00000000afbccb7d, req buff 0000000000000000, length: 0/0 zsi, status: 0, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0 MtpServer-2157 [000] d..2 1293.630421: cdns3_ep_queue: ep1out: req: 00000000afbccb7d, req buff 00000000871caf90, length: 0/512 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0 MtpServer-2157 [000] d..2 1293.630445: cdns3_wa1: WA1: ep1out set guard MtpServer-2157 [000] d..2 1293.630450: cdns3_wa1: WA1: ep1out restore cycle bit MtpServer-2157 [000] d..2 1293.630453: cdns3_prepare_trb: ep1out: trb 000000007317b3ee, dma buf: 0xffd5bc00, size: 512, burst: 128 ctrl: 0x00000424 (C=0, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0 MtpServer-2157 [000] d..2 1293.630460: cdns3_doorbell_epx: ep1out, ep_trbaddr ffd50414 .... irq/241-5b13000-2154 [000] d..1 1293.680849: cdns3_epx_irq: IRQ for ep1out: 01000408 ISP , ep_traddr: ffd508ac ep_last_sid: 00000000 use_streams: 0 irq/241-5b13000-2154 [000] d..1 1293.680858: cdns3_complete_trb: ep1out: trb 0000000021a11b54, dma buf: 0xffd50420, size: 16384, burst: 128 ctrl: 0x00001810 (C=0, T=0, CHAIN, LINK) SID:0 LAST_SID:0 irq/241-5b13000-2154 [000] d..1 1293.680865: cdns3_request_handled: Req: 00000000afbccb7d not handled, DMA pos: 185, ep deq: 88, ep enq: 185, start trb: 184, end trb: 184 Actually DMA pos already bigger than previous submit request afbccb7d's TRB (184-184). The reason of (not handled) is that deq position is wrong. The TRB link is below when irq happen. DEQ LINK LINK LINK LINK LINK .... TRB(afbccb7d):START DMA(EP_TRADDR). Original code check LINK TRB, but DEQ just move one step. LINK DEQ LINK LINK LINK LINK .... TRB(afbccb7d):START DMA(EP_TRADDR). This patch skip all LINK TRB and sync DEQ to trb's start. LINK LINK LINK LINK LINK .... DEQ = TRB(afbccb7d):START DMA(EP_TRADDR). Acked-by: Peter Chen <peter.chen@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Jun Li <jun.li@nxp.com> Link: https://lore.kernel.org/r/20211130154239.8029-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnectBadhri Jagan Sridharan1-4/+0
commit fbcd13df1e78eb2ba83a3c160eefe2d6f574beaf upstream. Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." This change makes TCPM to wait in SNK_DEBOUNCED state until CC1 and CC2 pins is SNK.Open for at least tPDDebounce. Previously, TCPM resets the port if vbus is not present in PD_T_PS_SOURCE_ON. This causes TCPM to loop continuously when connected to a faulty power source that does not present vbus. Waiting in SNK_DEBOUNCED also ensures that TCPM is adherant to "4.5.2.2.4.2 Exiting from AttachWait.SNK State" requirements. [ 6169.280751] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 6169.280759] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS] [ 6169.280771] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS] [ 6169.282427] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected] [ 6169.450825] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 6169.450834] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS] [ 6169.930892] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms] [ 6169.931296] disable vbus discharge ret:0 [ 6169.931301] Setting usb_comm capable false [ 6169.932783] Setting voltage/current limit 0 mV 0 mA [ 6169.932802] polarity 0 [ 6169.933706] Requesting mux state 0, usb-role 0, orientation 0 [ 6169.936689] cc:=0 [ 6169.936812] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS] [ 6169.937157] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected] [ 6170.036880] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms] [ 6170.036890] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev2 NONE_AMS] [ 6170.036896] Start toggling [ 6170.041412] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 6170.042973] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 6170.042976] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS] [ 6170.042981] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS] [ 6170.213014] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 6170.213019] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS] [ 6170.693068] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms] [ 6170.693304] disable vbus discharge ret:0 [ 6170.693308] Setting usb_comm capable false [ 6170.695193] Setting voltage/current limit 0 mV 0 mA [ 6170.695210] polarity 0 [ 6170.695990] Requesting mux state 0, usb-role 0, orientation 0 [ 6170.701896] cc:=0 [ 6170.702181] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS] [ 6170.703343] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected] Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20211130001825.3142830-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08USB: NO_LPM quirk Lenovo Powered USB-C Travel HubOle Ernst1-0/+3
commit d2a004037c3c6afd36d40c384d2905f47cd51c57 upstream. This is another branded 8153 device that doesn't work well with LPM: r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71 Disable LPM to resolve the issue. Signed-off-by: Ole Ernst <olebowle@gmx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211127090546.52072-1-olebowle@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08xhci: Fix commad ring abort, write all 64 bits to CRCR register.Mathias Nyman1-7/+14
commit 09f736aa95476631227d2dc0e6b9aeee1ad7ed58 upstream. Turns out some xHC controllers require all 64 bits in the CRCR register to be written to execute a command abort. The lower 32 bits containing the command abort bit is written first. In case the command ring stops before we write the upper 32 bits then hardware may use these upper bits to set the commnd ring dequeue pointer. Solve this by making sure the upper 32 bits contain a valid command ring dequeue pointer. The original patch that only wrote the first 32 to stop the ring went to stable, so this fix should go there as well. Fixes: ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command") Cc: stable@vger.kernel.org Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211126122340.1193239-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08vgacon: Propagate console boot parameters before calling `vc_resize'Maciej W. Rozycki1-5/+9
commit 3dfac26e2ef29ff2abc2a75aa4cd48fce25a2c4b upstream. Fix a division by zero in `vgacon_resize' with a backtrace like: vgacon_resize vc_do_resize vgacon_init do_bind_con_driver do_unbind_con_driver fbcon_fb_unbind do_unregister_framebuffer do_register_framebuffer register_framebuffer __drm_fb_helper_initial_config_and_unlock drm_helper_hpd_irq_event dw_hdmi_irq irq_thread kthread caused by `c->vc_cell_height' not having been initialized. This has only started to trigger with commit 860dafa90259 ("vt: Fix character height handling with VT_RESIZEX"), however the ultimate offender is commit 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console"). Said commit has added a call to `vc_resize' whenever `vgacon_init' is called with the `init' argument set to 0, which did not happen before. And the call is made before a key vgacon boot parameter retrieved in `vgacon_startup' has been propagated in `vgacon_init' for `vc_resize' to use to the console structure being worked on. Previously the parameter was `c->vc_font.height' and now it is `c->vc_cell_height'. In this particular scenario the registration of fbcon has failed and vt resorts to vgacon. Now fbcon does have initialized `c->vc_font.height' somehow, unlike `c->vc_cell_height', which is why this code did not crash before, but either way the boot parameters should have been copied to the console structure ahead of the call to `vc_resize' rather than afterwards, so that first the call has a chance to use them and second they do not change the console structure to something possibly different from what was used by `vc_resize'. Move the propagation of the vgacon boot parameters ahead of the call to `vc_resize' then. Adjust the comment accordingly. Fixes: 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console") Cc: stable@vger.kernel.org # v2.6.18+ Reported-by: Wim Osterholt <wim@djo.tudelft.nl> Reported-by: Pavel V. Panteleev <panteleev_p@mcst.ru> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2110252317110.58149@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08serial: 8250_bcm7271: UART errors after resuming from S2Al Cooper1-0/+13
[ Upstream commit 9cabe26e65a893afd5846908aa393bd283ab6609 ] There is a small window in time during resume where the hardware flow control signal RTS can be asserted (which allows a sender to resume sending data to the UART) but the baud rate has not yet been restored. This will cause corrupted data and FRAMING, OVERRUN and BREAK errors. This is happening because the MCTRL register is shadowed in uart_port struct and is later used during resume to set the MCTRL register during both serial8250_do_startup() and uart_resume_port(). Unfortunately, serial8250_do_startup() happens before the UART baud rate is restored. The fix is to clear the shadowed mctrl value at the end of suspend and restore it at the end of resume. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20211201201402.47446-1-alcooperx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net/mlx5e: Sync TIR params updates against concurrent create/modifyTariq Toukan3-27/+44
[ Upstream commit 4cce2ccf08fbc27ae34ce0e72db15166e7b5f6a7 ] Transport Interface Receive (TIR) objects perform the packet processing and reassembly and is also responsible for demultiplexing the packets into the different RQs. There are certain TIR context attributes that propagate to the pointed RQs and applied to them (like packet_merge offloads (LRO/SHAMPO) and tunneled_offload_en). When TIRs do not agree on attributes values, a "last one wins" policy is applied. Hence, if not synced properly, a race between TIR params update and a concurrent TIR create/modify operation might yield to a mismatch between the shadow parameters in SW and the actual applied state of the RQs in HW. tunneled_offload_en is a fixed attribute per profile, while packet merge offload state might be toggled and get out-of-sync. When this happens, packet_merge offload might be working although not requested, or the opposite. All updates to packet_merge state and all create/modify operations of regular redirection/steering TIRs are done under the same priv->state_lock, so they do not run in parallel, and no race is possible. However, there are other kind of TIRs (acceleration offloads TIRs, like TLS TIRs) which are created on demand for each new connection without holding the coarse priv->state_lock, hence might race. Fix this by synchronizing all packet_merge state reads and writes against all TIR create/modify operations. Include the modify operations of the regular redirection steering TIRs under the new lock, for better code layering and division of responsibilities. Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net/mlx5e: Rename TIR lro functions to TIR packet merge functionsKhalid Manaa14-91/+94
[ Upstream commit eaee12f046924eeb1210c7e4f3b326603ff1bd85 ] This series introduces new packet merge type, therefore rename lro functions to packet merge to support the new merge type: - Generalize + rename mlx5e_build_tir_ctx_lro to mlx5e_build_tir_ctx_packet_merge. - Rename mlx5e_modify_tirs_lro to mlx5e_modify_tirs_packet_merge. - Rename lro bit in mlx5_ifc_modify_tir_bitmask_bits to packet_merge. - Rename lro_en in mlx5e_params to packet_merge_type type and combine packet_merge params into one struct mlx5e_packet_merge_param. Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net/mlx5e: Rename lro_timeout to packet_merge_timeoutBen Ben-Ishay4-6/+6
[ Upstream commit 50f477fe9933193e960785f1192be801d7cd307a ] TIR stands for transport interface receive, the TIR object is responsible for performing all transport related operations on the receive side like packet processing, demultiplexing the packets to different RQ's, etc. lro_timeout is a field in the TIR that is used to set the timeout for lro session, this series introduces new packet merge type, therefore rename lro_timeout to packet_merge_timeout for all packet merge types. Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08Revert "drm/i915: Implement Wa_1508744258"José Roberto de Souza1-7/+0
[ Upstream commit 72641d8d60401a5f1e1a0431ceaf928680d34418 ] This workarounds are causing hangs, because I missed the fact that it needs to be enabled for all cases and disabled when doing a resolve pass. So KMD only needs to whitelist it and UMD will be the one setting it on per case. This reverts commit 28ec02c9cbebf3feeaf21a59df9dfbc02bda3362. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4145 Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Fixes: 28ec02c9cbeb ("drm/i915: Implement Wa_1508744258") Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211119140931.32791-1-jose.souza@intel.com (cherry picked from commit f3799ff16fcfacd44aee55db162830df461b631f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net/mlx5: E-Switch, Check group pointer before reading bw_share valueDmytro Linkin1-1/+1
[ Upstream commit 5c4e8ae7aa4875041102406801ee434e6c581aef ] If log_esw_max_sched_depth is not supported group pointer of the vport is NULL. Hence, check the pointer before reading bw_share value. Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups") Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net/mlx5: E-Switch, fix single FDB creation on BlueFieldMark Bloch1-0/+1
[ Upstream commit 43a0696f11567278b9412f947e43dd7906c831a8 ] Always use MLX5_FLOW_TABLE_OTHER_VPORT flag when creating egress ACL table for single FDB. Not doing so on BlueField will make firmware fail the command. On BlueField the E-Switch manager is the ECPF (vport 0xFFFE) which is filled in the flow table creation command but as the other_vport field wasn't set the firmware complains about a bad parameter. This is different from a regular HCA where the E-Switch manager vport is the PF (vport 0x0). Passing MLX5_FLOW_TABLE_OTHER_VPORT will make the firmware happy both on BlueField and on regular HCAs without special condition for each. This fixes the bellow firmware syndrome: mlx5_cmd_check:819:(pid 571): CREATE_FLOW_TABLE(0x930) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x754a4) Fixes: db202995f503 ("net/mlx5: E-Switch, add logic to enable shared FDB") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-07 06:16:14 +0300