summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-10-26nfc: port100: fix using -ERRNO as command type maskKrzysztof Kozlowski1-2/+2
During probing, the driver tries to get a list (mask) of supported command types in port100_get_command_type_mask() function. The value is u64 and 0 is treated as invalid mask (no commands supported). The function however returns also -ERRNO as u64 which will be interpret as valid command mask. Return 0 on every error case of port100_get_command_type_mask(), so the probing will stop. Cc: <stable@vger.kernel.org> Fixes: 0347a6ab300a ("NFC: port100: Commands mechanism implementation") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26Merge branch '100GbE' of ↵David S. Miller2-14/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-10-25 This series contains updates to ice driver only. Dave adds event handler for LAG NETDEV_UNREGISTER to unlink device from link aggregate. Yongxin Liu adds a check for PTP support during release which would cause a call trace on non-PTP supported devices. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26spi: spl022: fix Microwire full duplex modeThomas Perrot1-2/+3
There are missing braces in the function that verify controller parameters, then an error is always returned when the parameter to select Microwire frames operation is used on devices allowing it. Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com> Link: https://lore.kernel.org/r/20211022142104.1386379-1-thomas.perrot@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-26nvme-tcp: fix H2CData PDU send accounting (again)Sagi Grimberg1-1/+3
We should not access request members after the last send, even to determine if indeed it was the last data payload send. The reason is that a completion could have arrived and trigger a new execution of the request which overridden these members. This was fixed by commit 825619b09ad3 ("nvme-tcp: fix possible use-after-completion"). Commit e371af033c56 broke that assumption again to address cases where multiple r2t pdus are sent per request. To fix it, we need to record the request data_sent and data_len and after the payload network send we reference these counters to determine weather we should advance the request iterator. Fixes: e371af033c56 ("nvme-tcp: fix incorrect h2cdata pdu offset accounting") Reported-by: Keith Busch <kbusch@kernel.org> Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-26nvmet-tcp: fix a memory leak when releasing a queueMaurizio Lombardi1-0/+3
page_frag_free() won't completely release the memory allocated for the commands, the cache page must be explicitly freed by calling __page_frag_cache_drain(). This bug can be easily reproduced by repeatedly executing the following command on the initiator: $echo 1 > /sys/devices/virtual/nvme-fabrics/ctl/nvme0/reset_controller Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-26drm/i915/dp: Skip the HW readout of DPCD on disabled encodersImre Deak1-0/+3
Reading out the DP encoders' DPCD during booting or resume is only required for enabled encoders: such encoders may be modesetted during the initial commit and the link training this involves depends on an initialized DPCD. For DDI encoders reading out the DPCD is skipped, do the same on pre-DDI platforms. Atm, the first DPCD readout without a sink connected - which is a likely scneario if the encoder is disabled - leaves intel_dp->num_common_rates at 0, which resulted in intel_dp_sync_state()->intel_dp_max_common_rate() in a intel_dp->common_rates[-1] access. This by definition results in an undefined behaviour, though to my best knowledge in all HW/compiler configurations it actually results in accessing the array item type value preceding the array. In this case the preceding value happens to be intel_dp->num_common_rates, which is 0, so this issue - by luck - didn't cause a user visible problem. Nevertheless it's still an undefined behaviour and in CONFIG_UBSAN builds leads to a kernel BUG() (which revealed this problem for us), hence CC:stable. A related problem in case the encoder is enabled but the sink is not connected or the DPCD readout fails is fixed by the next patch. v2: Amend the commit message describing the root cause of the CONFIG_UBSAN BUG(). Fixes: a532cde31de3 ("drm/i915/tc: Fix TypeC port init/resume time sanitization") References: https://gitlab.freedesktop.org/drm/intel/-/issues/4297 Reported-and-tested-by: Mat Jonczyk <mat.jonczyk@o2.pl> Cc: Mat Jonczyk <mat.jonczyk@o2.pl> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-2-imre.deak@intel.com (cherry picked from commit 4ec5ffc341cecbea060739aea1d53398ac2ec3f8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-26drm/i915: Catch yet another unconditioal clflushVille Syrjälä1-1/+1
Replace the unconditional clflush() with drm_clflush_virt_range() which does the wbinvd() fallback when clflush is not available. This time no justification is given for the clflush in the offending commit. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Fixes: 2c8ab3339e39 ("drm/i915: Pin timeline map after first timeline pin, v4.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-4-ville.syrjala@linux.intel.com Reviewed-by: Dave Airlie <airlied@redhat.com> (cherry picked from commit 9ced12182d0d8401d821e9602e56e276459900fc) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-26drm/i915: Convert unconditional clflush to drm_clflush_virt_range()Ville Syrjälä1-1/+1
This one is apparently a "clflush for good measure", so bit more justification (if you can call it that) than some of the others. Convert to drm_clflush_virt_range() again so that machines without clflush will survive the ordeal. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Hellström <thomas.hellstrom@intel.com> #v1 Fixes: 12ca695d2c1e ("drm/i915: Do not share hwsp across contexts any more, v8.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-3-ville.syrjala@linux.intel.com Reviewed-by: Dave Airlie <airlied@redhat.com> (cherry picked from commit af7b6d234eefa30c461cc16912bafb32b9e6141c) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-26mlxsw: pci: Recycle received packet upon allocation failureIdo Schimmel1-13/+12
When the driver fails to allocate a new Rx buffer, it passes an empty Rx descriptor (contains zero address and size) to the device and marks it as invalid by setting the skb pointer in the descriptor's metadata to NULL. After processing enough Rx descriptors, the driver will try to process the invalid descriptor, but will return immediately seeing that the skb pointer is NULL. Since the driver no longer passes new Rx descriptors to the device, the Rx queue will eventually become full and the device will start to drop packets. Fix this by recycling the received packet if allocation of the new packet failed. This means that allocation is no longer performed at the end of the Rx routine, but at the start, before tearing down the DMA mapping of the received packet. Remove the comment about the descriptor being zeroed as it is no longer correct. This is OK because we either use the descriptor as-is (when recycling) or overwrite its address and size fields with that of the newly allocated Rx buffer. The issue was discovered when a process ("perf") consumed too much memory and put the system under memory pressure. It can be reproduced by injecting slab allocation failures [1]. After the fix, the Rx queue no longer comes to a halt. [1] # echo 10 > /sys/kernel/debug/failslab/times # echo 1000 > /sys/kernel/debug/failslab/interval # echo 100 > /sys/kernel/debug/failslab/probability FAULT_INJECTION: forcing a failure. name failslab, interval 1000, probability 100, space 0, times 8 [...] Call Trace: <IRQ> dump_stack_lvl+0x34/0x44 should_fail.cold+0x32/0x37 should_failslab+0x5/0x10 kmem_cache_alloc_node+0x23/0x190 __alloc_skb+0x1f9/0x280 __netdev_alloc_skb+0x3a/0x150 mlxsw_pci_rdq_skb_alloc+0x24/0x90 mlxsw_pci_cq_tasklet+0x3dc/0x1200 tasklet_action_common.constprop.0+0x9f/0x100 __do_softirq+0xb5/0x252 irq_exit_rcu+0x7a/0xa0 common_interrupt+0x83/0xa0 </IRQ> asm_common_interrupt+0x1e/0x40 RIP: 0010:cpuidle_enter_state+0xc8/0x340 [...] mlxsw_spectrum2 0000:06:00.0: Failed to alloc skb for RDQ Fixes: eda6500a987a ("mlxsw: Add PCI bus implementation") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20211024064014.1060919-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-26nvdimm/pmem: stop using q_usage_count as external pgmap refcountChristoph Hellwig1-31/+2
Originally all DAX access when through block_device operations and thus needed a queue reference. But since commit cccbce671582 ("filesystem-dax: convert to dax_direct_access()") all this happens at the DAX device level which uses its own refcounting. Having the external refcount thus wasn't needed but has otherwise been harmless for long time. But now that "block: drain file system I/O on del_gendisk" waits for q_usage_count to reach 0 in del_gendisk this whole scheme can't work anymore (and pmem is the only driver abusing q_usage_count like that). So switch to the internal reference and remove the unbalanced blk_freeze_queue_start that is taken care of by del_gendisk. Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk") Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211019073641.2323410-2-hch@lst.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-10-25ice: check whether PTP is initialized in ice_ptp_release()Yongxin Liu1-0/+3
PTP is currently only supported on E810 devices, it is checked in ice_ptp_init(). However, there is no check in ice_ptp_release(). For other E800 series devices, ice_ptp_release() will be wrongly executed. Fix the following calltrace. INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Workqueue: ice ice_service_task [ice] Call Trace: dump_stack_lvl+0x5b/0x82 dump_stack+0x10/0x12 register_lock_class+0x495/0x4a0 ? find_held_lock+0x3c/0xb0 __lock_acquire+0x71/0x1830 lock_acquire+0x1e6/0x330 ? ice_ptp_release+0x3c/0x1e0 [ice] ? _raw_spin_lock+0x19/0x70 ? ice_ptp_release+0x3c/0x1e0 [ice] _raw_spin_lock+0x38/0x70 ? ice_ptp_release+0x3c/0x1e0 [ice] ice_ptp_release+0x3c/0x1e0 [ice] ice_prepare_for_reset+0xcb/0xe0 [ice] ice_do_reset+0x38/0x110 [ice] ice_service_task+0x138/0xf10 [ice] ? __this_cpu_preempt_check+0x13/0x20 process_one_work+0x26a/0x650 worker_thread+0x3f/0x3b0 ? __kthread_parkme+0x51/0xb0 ? process_one_work+0x650/0x650 kthread+0x161/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Fixes: 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush") Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-25ice: Respond to a NETDEV_UNREGISTER event for LAGDave Ertman1-14/+4
When the PF is a member of a link aggregate, and the driver is removed, the process will hang unless we respond to the NETDEV_UNREGISTER event that is sent to the event_handler for LAG. Add a case statement for the ice_lag_event_handler to unlink the PF from the link aggregate. Also remove code that was incorrectly applying a dev_hold to peer_netdevs that were associated with the ice driver. Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-25spi: Fix tegra20 build with CONFIG_PM=n once againLinus Torvalds1-1/+1
Commit efafec27c565 ("spi: Fix tegra20 build with CONFIG_PM=n") already fixed the build without PM support once. There was an alternative fix by Guenter in commit 2bab94090b01 ("spi: tegra20-slink: Declare runtime suspend and resume functions conditionally"), and Mark then merged the two correctly in ffb1e76f4f32 ("Merge tag 'v5.15-rc2' into spi-5.15"). But for some inexplicable reason, Mark then merged things _again_ in commit 59c4e190b10c ("Merge tag 'v5.15-rc3' into spi-5.15"), and screwed things up at that point, and the __maybe_unused attribute on tegra_slink_runtime_resume() went missing. Reinstate it, so that alpha (and other architectures without PM support) builds cleanly again. Btw, this is another prime example of how random back-merges are not good. Just don't do them. Subsystem developers should not merge my tree in any normal circumstances. Both of those merge commits pointed to above are bad: even the one that got the merge result right doesn't even mention _why_ it was done, and the one that got it wrong is obviously broken. Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-10-25Merge tag 'libata-5.15-rc7' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull libata fix from Damien Le Moal: "A single fix in this pull request addressing an invalid error code return in the sata_mv driver (from Zheyu)" * tag 'libata-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: sata_mv: Fix the error handling of mv_chip_id()
2021-10-25Merge tag 'pinctrl-v5.15-3' of ↵Linus Torvalds3-21/+43
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Some late pin control fixes, the most generally annoying will probably be the AMD IRQ storm fix affecting the Microsoft surface. Summary: - Three fixes pertaining to Broadcom DT bindings. Some stuff didn't work out as inteded, we need to back out - A resume bug fix in the STM32 driver - Disable and mask the interrupts on probe in the AMD pinctrl driver, affecting Microsoft surface" * tag 'pinctrl-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: amd: disable and mask interrupts on probe pinctrl: stm32: use valid pin identifier in stm32_pinctrl_resume() Revert "pinctrl: bcm: ns: support updated DT binding as syscon subnode" dt-bindings: pinctrl: brcm,ns-pinmux: drop unneeded CRU from example Revert "dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon"
2021-10-25xen/netfront: stop tx queues during live migrationDongli Zhang1-0/+8
The tx queues are not stopped during the live migration. As a result, the ndo_start_xmit() may access netfront_info->queues which is freed by talk_to_netback()->xennet_destroy_queues(). This patch is to netif_device_detach() at the beginning of xen-netfront resuming, and netif_device_attach() at the end of resuming. CPU A CPU B talk_to_netback() -> if (info->queues) xennet_destroy_queues(info); to free netfront_info->queues xennet_start_xmit() to access netfront_info->queues -> err = xennet_create_queues(info, &num_queues); The idea is borrowed from virtio-net. Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25RDMA/sa_query: Use strscpy_pad instead of memcpy to copy a stringMark Zhang1-2/+3
When copying the device name, the length of the data memcpy copied exceeds the length of the source buffer, which cause the KASAN issue below. Use strscpy_pad() instead. BUG: KASAN: slab-out-of-bounds in ib_nl_set_path_rec_attrs+0x136/0x320 [ib_core] Read of size 64 at addr ffff88811a10f5e0 by task rping/140263 CPU: 3 PID: 140263 Comm: rping Not tainted 5.15.0-rc1+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x57/0x7d print_address_description.constprop.0+0x1d/0xa0 kasan_report+0xcb/0x110 kasan_check_range+0x13d/0x180 memcpy+0x20/0x60 ib_nl_set_path_rec_attrs+0x136/0x320 [ib_core] ib_nl_make_request+0x1c6/0x380 [ib_core] send_mad+0x20a/0x220 [ib_core] ib_sa_path_rec_get+0x3e3/0x800 [ib_core] cma_query_ib_route+0x29b/0x390 [rdma_cm] rdma_resolve_route+0x308/0x3e0 [rdma_cm] ucma_resolve_route+0xe1/0x150 [rdma_ucm] ucma_write+0x17b/0x1f0 [rdma_ucm] vfs_write+0x142/0x4d0 ksys_write+0x133/0x160 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f26499aa90f Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 fd ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 5c fd ff ff 48 RSP: 002b:00007f26495f2dc0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000000007d0 RCX: 00007f26499aa90f RDX: 0000000000000010 RSI: 00007f26495f2e00 RDI: 0000000000000003 RBP: 00005632a8315440 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000293 R12: 00007f26495f2e00 R13: 00005632a83154e0 R14: 00005632a8315440 R15: 00005632a830a810 Allocated by task 131419: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 proc_self_get_link+0x8b/0x100 pick_link+0x4f1/0x5c0 step_into+0x2eb/0x3d0 walk_component+0xc8/0x2c0 link_path_walk+0x3b8/0x580 path_openat+0x101/0x230 do_filp_open+0x12e/0x240 do_sys_openat2+0x115/0x280 __x64_sys_openat+0xce/0x140 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 2ca546b92a02 ("IB/sa: Route SA pathrecord query through netlink") Link: https://lore.kernel.org/r/72ede0f6dab61f7f23df9ac7a70666e07ef314b0.1635055496.git.leonro@nvidia.com Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-10-25net: nxp: lpc_eth.c: avoid hang when bringing interface downTrevor Woerner1-3/+2
A hard hang is observed whenever the ethernet interface is brought down. If the PHY is stopped before the LPC core block is reset, the SoC will hang. Comparing lpc_eth_close() and lpc_eth_open() I re-arranged the ordering of the functions calls in lpc_eth_close() to reset the hardware before stopping the PHY. Fixes: b7370112f519 ("lpc32xx: Added ethernet driver") Signed-off-by: Trevor Woerner <twoerner@gmail.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_set: Lock the PHY while changing settingsAndrew Lunn1-1/+3
There is a race condition where the PHY state machine can change members of the phydev structure at the same time userspace requests a change via ethtool. To prevent this, have phy_ethtool_ksettings_set take the PHY lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Reported-by: Walter Stoll <Walter.Stoll@duagon.com> Suggested-by: Walter Stoll <Walter.Stoll@duagon.com> Tested-by: Walter Stoll <Walter.Stoll@duagon.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_start_aneg: Add an unlocked versionAndrew Lunn1-6/+24
Split phy_start_aneg into a wrapper which takes the PHY lock, and a helper doing the real work. This will be needed when phy_ethtook_ksettings_set takes the lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_set: Move after phy_start_anegAndrew Lunn1-53/+53
This allows it to make use of a helper which assume the PHY is already locked. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_get: Lock the phy for consistencyAndrew Lunn1-0/+2
The PHY structure should be locked while copying information out if it, otherwise there is no guarantee of self consistency. Without the lock the PHY state machine could be updating the structure. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25gpio: mlxbf2.c: Add check for bgpio_init failureAsmaa Mnebhi1-0/+5
Add a check if bgpio_init fails. Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-10-25gpio: xgs-iproc: fix parsing of ngpios propertyJonas Gorski1-1/+1
of_property_read_u32 returns 0 on success, not true, so we need to invert the check to actually take over the provided ngpio value. Fixes: 6a41b6c5fc20 ("gpio: Add xgs-iproc driver") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-10-25ata: sata_mv: Fix the error handling of mv_chip_id()Zheyu Ma1-2/+2
mv_init_host() propagates the value returned by mv_chip_id() which in turn gets propagated by mv_pci_init_one() and hits local_pci_probe(). During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Since this is a bug rather than a recoverable runtime error we should use dev_alert() instead of dev_err(). Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2021-10-24Merge tag 'scsi-fixes' of ↵Linus Torvalds11-41/+69
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Ten fixes, seven of which are in drivers. The core fixes are one to fix a potential crash on resume, one to sort out our reference count releases to avoid releasing in-use modules and one to adjust the cmd per lun calculation to avoid an overflow in hyper-v" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: ufs-pci: Force a full restore after suspend-to-disk scsi: qla2xxx: Fix unmap of already freed sgl scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els() scsi: qla2xxx: Return -ENOMEM if kzalloc() fails scsi: sd: Fix crashes in sd_resume_runtime() scsi: mpi3mr: Fix duplicate device entries when scanning through sysfs scsi: core: Put LLD module refcnt after SCSI device is released scsi: storvsc: Fix validation for unsolicited incoming packets scsi: iscsi: Fix set_param() handling scsi: core: Fix shost->cmd_per_lun calculation in scsi_add_host_with_dma()
2021-10-24net: ethernet: microchip: lan743x: Fix dma allocation failure by using ↵Yuiko Oshino1-0/+20
dma_set_mask_and_coherent The dma failure was reported in the raspberry pi github (issue #4117). https://github.com/raspberrypi/linux/issues/4117 The use of dma_set_mask_and_coherent fixes the issue. Tested on 32/64-bit raspberry pi CM4 and 64-bit ubuntu x86 PC with EVB-LAN7430. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: ethernet: microchip: lan743x: Fix driver crash when lan743x_pm_resume failsYuiko Oshino1-0/+2
The driver needs to clean up and return when the initialization fails on resume. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-22Merge tag 'hyperv-fixes-signed-20211022' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyper-v fix from Wei Liu: - Fix vmbus ARM64 build (Arnd Bergmann) * tag 'hyperv-fixes-signed-20211022' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hyperv/vmbus: include linux/bitops.h
2021-10-22hyperv/vmbus: include linux/bitops.hArnd Bergmann1-0/+1
On arm64 randconfig builds, hyperv sometimes fails with this error: In file included from drivers/hv/hv_trace.c:3: In file included from drivers/hv/hyperv_vmbus.h:16: In file included from arch/arm64/include/asm/sync_bitops.h:5: arch/arm64/include/asm/bitops.h:11:2: error: only <linux/bitops.h> can be included directly In file included from include/asm-generic/bitops/hweight.h:5: include/asm-generic/bitops/arch_hweight.h:9:9: error: implicit declaration of function '__sw_hweight32' [-Werror,-Wimplicit-function-declaration] include/asm-generic/bitops/atomic.h:17:7: error: implicit declaration of function 'BIT_WORD' [-Werror,-Wimplicit-function-declaration] Include the correct header first. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211018131929.2260087-1-arnd@kernel.org Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-10-22Merge tag 'acpi-5.15-rc7' of ↵Linus Torvalds1-6/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix two regressions, one related to ACPI power resources management and one that broke ACPI tools compilation. Specifics: - Stop turning off unused ACPI power resources in an unknown state to address a regression introduced during the 5.14 cycle (Rafael Wysocki). - Fix an ACPI tools build issue introduced recently when the minimal stdarg.h was added (Miguel Bernal Marin)" * tag 'acpi-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Do not turn off power resources in unknown state ACPI: tools: fix compilation error
2021-10-22vduse: Fix race condition between resetting and irq injectingXie Yongji1-12/+25
The interrupt might be triggered after a reset since there is no synchronization between resetting and irq injecting. And it might break something if the interrupt is delayed until a new round of device initialization. Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace") Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Link: https://lore.kernel.org/r/20210929083050.88-1-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-22vduse: Disallow injecting interrupt before DRIVER_OK is setXie Yongji1-0/+8
The interrupt callback should not be triggered before DRIVER_OK is set. Otherwise, it might break the virtio device driver. So let's add a check to avoid the unexpected behavior. Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace") Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Link: https://lore.kernel.org/r/20210923075722.98-1-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-22drm/i915/selftests: Properly reset mock object propers for each testDaniel Vetter1-0/+1
I forgot to do this properly in commit 6f11f37459d8f9f74ff1c299c0bedd50b458057a Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Jul 23 10:34:55 2021 +0200 drm/plane: remove drm_helper_get_plane_damage_clips intel-gfx CI didn't spot this because we run each selftest in each own invocations, which means reloading i915.ko. But if you just run all the selftests in one go at boot-up, then it falls apart and eventually we cross over the hardcoded limited of how many properties can be attached to a single object. Fix this by resetting the property count. Nothing else to clean up since it's all static storage anyway. Reported-and-tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Fixes: 6f11f37459d8 ("drm/plane: remove drm_helper_get_plane_damage_clips") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211021202048.2638668-1-daniel.vetter@ffwll.ch
2021-10-22Merge tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drmLinus Torvalds13-42/+137
Pull drm fixes from Dave Airlie: "Nothing too crazy at the end of the cycle, the kmb modesetting fixes are probably a bit large but it's not a major driver, and its fixing monitor doesn't turn on type problems. Otherwise it's just a few minor patches, one ast regression revert, an msm power stability fix. ast: - fix regression with connector detect msm: - fix power stability issue msxfb: - fix crash on unload panel: - sync fix kmb: - modesetting fixes" * tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drm: Revert "drm/ast: Add detect function support" drm/kmb: Enable ADV bridge after modeset drm/kmb: Corrected typo in handle_lcd_irq drm/kmb: Disable change of plane parameters drm/kmb: Remove clearing DPHY regs drm/kmb: Limit supported mode to 1080p drm/kmb: Work around for higher system clock drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel drm: mxsfb: Fix NULL pointer dereference crash on unload drm/msm/devfreq: Restrict idle clamping to a618 for now
2021-10-22memblock: exclude MEMBLOCK_NOMAP regions from kmemleakMike Rapoport2-0/+5
Vladimir Zapolskiy reports: Commit a7259df76702 ("memblock: make memblock_find_in_range method private") invokes a kernel panic while running kmemleak on OF platforms with nomaped regions: Unable to handle kernel paging request at virtual address fff000021e00000 [...] scan_block+0x64/0x170 scan_gray_list+0xe8/0x17c kmemleak_scan+0x270/0x514 kmemleak_write+0x34c/0x4ac The memory allocated from memblock is registered with kmemleak, but if it is marked MEMBLOCK_NOMAP it won't have linear map entries so an attempt to scan such areas will fault. Ideally, memblock_mark_nomap() would inform kmemleak to ignore MEMBLOCK_NOMAP memory, but it can be called before kmemleak interfaces operating on physical addresses can use __va() conversion. Make sure that functions that mark allocated memory as MEMBLOCK_NOMAP take care of informing kmemleak to ignore such memory. Link: https://lore.kernel.org/all/8ade5174-b143-d621-8c8e-dc6a1898c6fb@linaro.org Link: https://lore.kernel.org/all/c30ff0a2-d196-c50d-22f0-bd50696b1205@quicinc.com Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private") Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Tested-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-10-22Merge tag 'net-5.15-rc7' of ↵Linus Torvalds59-179/+354
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, and can. We'll have one more fix for a socket accounting regression, it's still getting polished. Otherwise things look fine. Current release - regressions: - revert "vrf: reset skb conntrack connection on VRF rcv", there are valid uses for previous behavior - can: m_can: fix iomap_read_fifo() and iomap_write_fifo() Current release - new code bugs: - mlx5: e-switch, return correct error code on group creation failure Previous releases - regressions: - sctp: fix transport encap_port update in sctp_vtag_verify - stmmac: fix E2E delay mechanism (in PTP timestamping) Previous releases - always broken: - netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr - netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of init - netfilter: ipvs: make global sysctl read-only in non-init netns - tcp: md5: fix selection between vrf and non-vrf keys - ipv6: count rx stats on the orig netdev when forwarding - bridge: mcast: use multicast_membership_interval for IGMPv3 - can: - j1939: fix UAF for rx_kref of j1939_priv abort sessions on receiving bad messages - isotp: fix TX buffer concurrent access in isotp_sendmsg() fix return error on FC timeout on TX path - ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited - hns3: schedule the polling again when allocation fails, prevent stalls - drivers: add missing of_node_put() when aborting for_each_available_child_of_node() - ptp: fix possible memory leak and UAF in ptp_clock_register() - e1000e: fix packet loss in burst mode on Tiger Lake and later - mlx5e: ipsec: fix more checksum offload issues" * tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits) usbnet: sanity check for maxpacket net: enetc: make sure all traffic classes can send large frames net: enetc: fix ethtool counter name for PM0_TERR ptp: free 'vclock_index' in ptp_clock_release() sfc: Don't use netif_info before net_device setup sfc: Export fibre-specific supported link modes net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags net/mlx5e: IPsec: Fix a misuse of the software parser's fields net/mlx5e: Fix vlan data lost during suspend flow net/mlx5: E-switch, Return correct error code on group creation failure net/mlx5: Lag, change multipath and bonding to be mutually exclusive ice: Add missing E810 device ids igc: Update I226_K device ID e1000e: Fix packet loss on Tiger Lake and later e1000e: Separate TGP board type from SPT ptp: Fix possible memory leak in ptp_clock_register() net: stmmac: Fix E2E delay mechanism nfc: st95hf: Make spi remove() callback return zero net: hns3: disable sriov before unload hclge layer net: hns3: fix vf reset workqueue cannot exit ...
2021-10-21Revert "drm/ast: Add detect function support"Kim Phillips1-17/+1
This reverts commit aae74ff9caa8de9a45ae2e46068c417817392a26, since it prevents my AMD Milan system from booting, with: [ 27.189558] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 27.197506] #PF: supervisor write access in kernel mode [ 27.203333] #PF: error_code(0x0002) - not-present page [ 27.209064] PGD 0 P4D 0 [ 27.211885] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 27.216744] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6+ #15 [ 27.223928] Hardware name: AMD Corporation ETHANOL_X/ETHANOL_X, BIOS RXM1006B 08/20/2021 [ 27.232955] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.238397] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.259350] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.265176] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.273134] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.281084] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.289043] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.297002] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.304961] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.313988] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.320396] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.328346] PKRU: 55555554 [ 27.331359] Call Trace: [ 27.334073] <IRQ> [ 27.336314] ? __queue_work+0x420/0x420 [ 27.340589] ? lapic_next_event+0x21/0x30 [ 27.345060] ? clockevents_program_event+0x8f/0xe0 [ 27.350402] __do_softirq+0xfb/0x2db [ 27.354388] irq_exit_rcu+0x98/0xd0 [ 27.358275] sysvec_apic_timer_interrupt+0xac/0xd0 [ 27.363620] </IRQ> [ 27.365955] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 27.371685] RIP: 0010:cpuidle_enter_state+0xcc/0x390 [ 27.377292] Code: 3d 01 79 0a 50 e8 44 ed 77 ff 49 89 c6 0f 1f 44 00 00 31 ff e8 f5 f8 77 ff 80 7d d7 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ff 0f 88 17 01 00 00 49 63 c7 4c 2b 75 c8 48 8d 14 40 48 8d [ 27.398243] RSP: 0018:ffffffffb0e03dc8 EFLAGS: 00000246 [ 27.404069] RAX: ffffa0c44de00000 RBX: 0000000000000001 RCX: 000000000000001f [ 27.412028] RDX: 0000000000000000 RSI: ffffffffb0bafc1f RDI: ffffffffb0bbdb81 [ 27.419986] RBP: ffffffffb0e03e00 R08: 00000006549f8f3f R09: ffffffffb1065200 [ 27.427935] R10: ffffa0c44de27ae4 R11: ffffa0c44de27ac4 R12: ffffa0c5634cb000 [ 27.435894] R13: ffffffffb1065200 R14: 00000006549f8f3f R15: 0000000000000001 [ 27.443854] ? cpuidle_enter_state+0xbb/0x390 [ 27.448712] cpuidle_enter+0x2e/0x40 [ 27.452695] call_cpuidle+0x23/0x40 [ 27.456584] do_idle+0x1f0/0x270 [ 27.460181] cpu_startup_entry+0x20/0x30 [ 27.464553] rest_init+0xd4/0xe0 [ 27.468149] arch_call_rest_init+0xe/0x1b [ 27.472619] start_kernel+0x6bc/0x6e2 [ 27.476764] x86_64_start_reservations+0x24/0x26 [ 27.481912] x86_64_start_kernel+0x75/0x79 [ 27.486477] secondary_startup_64_no_verify+0xb0/0xbb [ 27.492111] Modules linked in: kvm_amd(+) kvm ipmi_si(+) ipmi_devintf rapl wmi_bmof ipmi_msghandler input_leds ccp k10temp mac_hid sch_fq_codel msr ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm drm_kms_helper crct10dif_pclmul crc32_pclmul ghash_clmulni_intel syscopyarea aesni_intel sysfillrect crypto_simd sysimgblt fb_sys_fops cryptd hid_generic cec nvme ahci usbhid drm e1000e nvme_core hid libahci i2c_piix4 wmi [ 27.551789] CR2: 0000000000000000 [ 27.555482] ---[ end trace 897987dfe93dccc6 ]--- [ 27.560630] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.566069] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.587021] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.592848] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.600808] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.608765] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.616716] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.624673] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.632624] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.641650] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.648159] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.656119] PKRU: 55555554 [ 27.659133] Kernel panic - not syncing: Fatal exception in interrupt [ 29.030411] Shutting down cpus with NMI [ 29.034699] Kernel Offset: 0x2e600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 29.046790] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Since unreliable, found by bisecting for KASAN's use-after-free in enqueue_timer+0x4f/0x1e0, where the timer callback is called. Reported-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Fixes: aae74ff9caa8 ("drm/ast: Add detect function support") Link: https://lore.kernel.org/lkml/0f7871be-9ca6-5ae4-3a40-5db9a8fb2365@amd.com/ Cc: Ainux <ainux.wang@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: sterlingteng@gmail.com Cc: chenhuacai@kernel.org Cc: Chuck Lever III <chuck.lever@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Jon Grimm <jon.grimm@amd.com> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: linux-kernel <linux-kernel@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211021153006.92983-1-kim.phillips@amd.com
2021-10-21Merge tag 'drm-misc-fixes-2021-10-21-1' of ↵Dave Airlie9-24/+123
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.15-rc7: - Rebased, to remove vc4 patches. - Fix mxsfb crash on unload. - Use correct sync parameters for Feixin K101-IM2BYL02. - Assorted kmb modeset/atomic fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e66eaf89-b9b9-41f5-d0d2-dad7e59fabb5@linux.intel.com
2021-10-21Merge tag 'drm-msm-fixes-2021-10-18' of ↵Dave Airlie3-1/+13
https://gitlab.freedesktop.org/drm/msm into drm-fixes One more fix for v5.15, to work around a power stability issue on a630 (and possibly others) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs1WPLthmd=ToDcEHm=u-7O38RAVJ2XwRoS8xPmC520vg@mail.gmail.com
2021-10-21drm: panel-orientation-quirks: Add quirk for Aya Neo 2021Bryant Mairs1-0/+6
Fixes screen orientation for the Aya Neo 2021 handheld gaming console. Signed-off-by: Bryant Mairs <bryant@mai.rs> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211019142433.4295-1-bryant@mai.rs
2021-10-21usbnet: sanity check for maxpacketOliver Neukum1-0/+4
maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up. V2: fixed typo in log and stylistic issues Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+76bb1d34ffa0adc03baa@syzkaller.appspotmail.com Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211021122944.21816-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-21net: enetc: make sure all traffic classes can send large framesVladimir Oltean1-1/+4
The enetc driver does not implement .ndo_change_mtu, instead it configures the MAC register field PTC{Traffic Class}MSDUR[MAXSDU] statically to a large value during probe time. The driver used to configure only the max SDU for traffic class 0, and that was fine while the driver could only use traffic class 0. But with the introduction of mqprio, sending a large frame into any other TC than 0 is broken. This patch fixes that by replicating per traffic class the static configuration done in enetc_configure_port_mac(). Fixes: cbe9e835946f ("enetc: Enable TC offloading with mqprio") Reported-by: Richie Pearn <richard.pearn@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20211020173340.1089992-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-21net: enetc: fix ethtool counter name for PM0_TERRVladimir Oltean1-1/+1
There are two counters named "MAC tx frames", one of them is actually incorrect. The correct name for that counter should be "MAC tx error frames", which is symmetric to the existing "MAC rx error frames". Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20211020165206.1069889-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-21drm/ttm: fix memleak in ttm_transfered_destroyChristian König1-0/+1
We need to cleanup the fences for ghost objects as well. Signed-off-by: Christian König <christian.koenig@amd.com> Reported-by: Erhard F. <erhard_f@mailbox.org> Tested-by: Erhard F. <erhard_f@mailbox.org> Reviewed-by: Huang Rui <ray.huang@amd.com> Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214029 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214447 CC: <stable@vger.kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211020173211.2247-1-christian.koenig@amd.com
2021-10-21ptp: free 'vclock_index' in ptp_clock_release()Yang Yingliang1-4/+1
'vclock_index' is accessed from sysfs, it shouled be freed in release function, so move it from ptp_clock_unregister() to ptp_clock_release(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21sfc: Don't use netif_info before net_device setupErik Ekman2-3/+3
Use pci_info instead to avoid unnamed/uninitialized noise: [197088.688729] sfc 0000:01:00.0: Solarflare NIC detected [197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F [197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed [197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support Inspired by fa44821a4ddd ("sfc: don't use netif_info et al before net_device is registered") from Heiner Kallweit. Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21sfc: Export fibre-specific supported link modesErik Ekman1-11/+26
The 1/10GbaseT modes were set up for cards with SFP+ cages in 3497ed8c852a5 ("sfc: report supported link speeds on SFP connections"). 10GbaseT was likely used since no 10G fibre mode existed. The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144 ("net: ethtool: add support for 1000BaseX and missing 10G link modes") shortly thereafter. The user guide available at https://support-nic.xilinx.com/wp/drivers lists support for the following cable and transceiver types in section 2.9: - QSFP28 100G Direct Attach Cables - QSFP28 100G SR Optical Transceivers (with SR4 modules listed) - SFP28 25G Direct Attach Cables - SFP28 25G SR Optical Transceivers - QSFP+ 40G Direct Attach Cables - QSFP+ 40G Active Optical Cables - QSFP+ 40G SR4 Optical Transceivers - QSFP+ to SFP+ Breakout Direct Attach Cables - QSFP+ to SFP+ Breakout Active Optical Cables - SFP+ 10G Direct Attach Cables - SFP+ 10G SR Optical Transceivers - SFP+ 10G LR Optical Transceivers - SFP 1000BASE‐T Transceivers - 1G Optical Transceivers (From user guide issue 28. Issue 16 which also includes older cards like SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.) Regarding SFP+ 10GBASE‐T transceivers the latest guide says: "Solarflare adapters do not support 10GBASE‐T transceiver modules." Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR). Before: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes After: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Supports Wake-on: g Wake-on: d Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21Merge tag 'mlx5-fixes-2021-10-20' of ↵David S. Miller11-54/+85
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2021-10-20 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21drm/kmb: Enable ADV bridge after modesetAnitha Chrisanthus3-8/+10
On KMB, ADV bridge must be programmed and powered on prior to MIPI DSI HW initialization. v2: changed to atomic_bridge_chain_enable (Sam) Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Co-developed-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211019230719.789958-1-anitha.chrisanthus@intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-15 11:08:23 +0300