summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2005-10-28[SCSI] move the mid-layer printk's over to shost/starget/sdev_printkJames Bottomley14-119/+86
This should eliminate (at least in the mid layer) to make numeric assumptions about any of the enumeration variables. As a side effect, it will also make all the messages consistent and line us up nicely for the error logging strategy (if it ever shows itself again). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: remove eh_active checks in qla2xxx error handlingAndrew Vasquez1-26/+15
Here's a patch which drops the eh_active checks in the qla2xxx eh_handler callbacks. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] avoid overflows in disk size calculationsJames Bottomley1-4/+3
Be more careful about doing the arithmetic in the non-LBD case. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: Resync with latest released ISP23xx/63xx firmware -- 3.03.18.James Bottomley3-21052/+21098
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: Update license.Andrew Vasquez27-393/+113
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: Use midlayer's int_to_scsilun() function.Andrew Vasquez2-4/+3
While populating command type 6 and 7 IOCBs. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: Add support to dynamically enable/disable ZIO.Andrew Vasquez7-41/+146
ISP23xx and ISP24xx chips have support for an adaptive method of posting SCSI command completions for multiple SCSI commands during a single system interrupt. SCSI commands are placed on the system response queue without interrupting the host until 1) a delay timer expires; or 2) a SCSI command completes with an error. As long as the host software (qla2xxx) services the response queue for completions (this polling is done during queuecommand()) within the 'delay timer' period, the firmware will not generate system interrupt. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: Correct issue where fcport is prematurely marked DEAD.Andrew Vasquez1-1/+1
The non-handled failure cases of the Fabric Login mailbox command handling logic would incorrectly mark the fcport as dead and not allow the standard port-down-retry-count logic to manage the transition. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] aacraid: Newer adapter communication iterface supportMark Haverkamp11-219/+454
Received from Mark Salyzyn. This patch adds the 'new comm' interface, which modern AAC based adapters that are less than a year old support in the name of much improved performance. These modern adapters support both the legacy and the 'new comm' interfaces. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28Merge HEAD from ../scsi-misc-2.6-old James Bottomley13-296/+5206
2005-10-28Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds18-11/+1047
Minor manual fixups for gfp_t clashes.
2005-10-28[SCSI] aacraid: remove compiler warningMark Haverkamp1-2/+2
Received from Mark Salyzyn. This patch resolves a compiler warning on 64 bit architectures. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] aacraid: fix struct element cpu orderMark Haverkamp2-2/+2
Received from Mark Salyzyn. The compat field needed to be in cpu order. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] aacraid: fix inquiry pageMark Haverkamp1-11/+38
Received from Mark Salyzyn. This patch uses the adapter supplemental information AdapterTypeText as the default for the array name. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] aacraid: Use DMA mask definesJames Bottomley2-9/+9
From: Mark Haverkamp <markh@osdl.org> Received from Mark Salyzyn. This patch changes the driver over to utilizing the DMA_64BIT_MASK and DMA_32BIT_MASK manifests. Applies to the scsi-rc-fixes-2.6 git tree. Signed-off-by: Mark Haverkamp <markh@osdl.org> Rejects fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28Merge branch 'sx8' of ↵Linus Torvalds1-14/+37
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6
2005-10-28Merge branch 'upstream' of ↵Linus Torvalds20-774/+3784
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-10-28Merge branch 'upstream' of ↵Linus Torvalds121-4034/+6078
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2005-10-28Merge branch 'elevator-switch' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds2-158/+61
Manual fixup for trivial "gfp_t" changes.
2005-10-28Merge branch 'generic-dispatch' of ↵Linus Torvalds6-773/+376
git://brick.kernel.dk/data/git/linux-2.6-block
2005-10-28Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds2-16/+22
2005-10-28[ARM] 2897/2: PXA2xx IRDA supportNicolas Pitre3-0/+882
Patch from Nicolas Pitre This is the PXA2xx common IRDA driver, plus platform support for Lubbock and Mainstone. Signed-off-by: Nicolas Pitre <nico@cam.org> Acked-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 2921/1: Support for the RTC / nvram on the Comdial MP1000Jon Ringle1-1/+109
Patch from Jon Ringle This adds support for the RTC and nvram on the Comdial MP1000 Signed-off-by: Jon Ringle Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 3029/1: Add HWUART support for PXA 255/26xMatt Reimer1-1/+20
Patch from Matt Reimer Adds support for HWUART on PXA 255 / 26x. This patch originally came from http://svn.rungie.com/svn/gumstix-buildroot/trunk/sources/kernel-patches/000-gumstix-hwuart.patch and has been tweaked by me. Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 2919/1: CS8900A ethernet driver modifications for the Comdial MP1000Jon Ringle3-3/+15
Patch from Jon Ringle This patch gives support for the CS8900A ethernet chip on the Comdial MP1000 Signed-off-by: Jon Ringle Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 2918/1: [update] Base port of Comdial MP1000 platfromJon Ringle1-0/+9
Patch from Jon Ringle Updated 2898/1 per comments: - Removed fixup - Moved code in mach-mp1000/ to mach-clps711x/ - Cleaned up code in mp1000-seprom.c. Eliminated code that displayed the contents of the eeprom Please comment. Signed-off-by: Jon Ringle Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[PATCH] gfp_t: remaining bits of drivers/*Al Viro8-8/+8
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[PATCH] gfp_t: drivers/netAl Viro6-8/+9
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[PATCH] gfp_t: drivers/infinibandAl Viro4-4/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[PATCH] gfp_t: drivers/scsiAl Viro12-18/+24
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[PATCH] gfp_t: drivers/usbAl Viro34-89/+89
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[PATCH] gfp_t: dma-mapping (parisc)Al Viro2-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[PATCH] gfp_t: block layer coreAl Viro5-15/+15
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[ARM] 3044/1: Fix sparse warnings about incompatible pointer types for ↵Ian Campbell2-5/+5
register defined in pxa-regs.h Patch from Ian Campbell The sparse warning initially surfaced in sound/arm/pxa2xx-ac97.c because it was using u32 * variables to hold the unsigned long * register addresses. I submitted an ALSA patch for this http://thread.gmane.org/gmane.linux.alsa.devel/27804 issue and it was suggested that it might be preferable to change the register definitions to use u32. Most other subarches seem to use u32 for their register type, at least the ones which use a __REG macro (like the PXA) do. Nico indicated in the thread above that he wouldn't mind this patch. Changing the type required fixes for opposite warnings in the pxa2xx usb gadget code but that was the only new warning introduced on defconfig or lubbock, mainstone and our own PXA255 boards. Signed-off-by: Ian Campbell <icampbell@arcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] Fix sparse warningsRussell King1-1/+1
Fix sparse warnings in arch/arm/kernel/module.c, arch/arm/mm/consistent.c, drivers/pcmcia/sa1111_generic.c, and platform support files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 3/4: Remove asm/hardware.h from SA1100 io.hRussell King1-0/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 3/4: Remove asm/hardware.h from Versatile and Integrator io.hRussell King4-0/+4
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 2/4: Remove asm/hardware.h from asm-arm/arch-ebsa110/io.hRussell King1-0/+1
EBSA110 only requires hardware.h to be included for a couple of files. Move the include there. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[BLOCK] Leftover reference to ->max_back_kbJens Axboe1-1/+0
Signed-off-by: Jens Axboe <axboe@suse.de>
2005-10-28[BLOCK] elevator switch fixes/cleanupJens Axboe2-5/+5
- 100msec sleep is a little excessive, lots of requests can complete in that timeframe. Use 10msec instead. - Rename QUEUE_FLAG_BYPASS to QUEUE_FLAG_ELVSWITCH to indicate what is going on. Signed-off-by: Jens Axboe <axboe@suse.de>
2005-10-28[BLOCK] Reimplement elevator switchTejun Heo2-158/+62
This patch reimplements elevator switch. This patch assumes generic dispatch queue patchset is applied. * Each request is tagged with REQ_ELVPRIV flag if it has its elevator private data set. * Requests which doesn't have REQ_ELVPRIV flag set never enter iosched. They are always directly back inserted to dispatch queue. Of course, elevator_put_req_fn is called only for requests which have its REQ_ELVPRIV set. * Request queue maintains the current number of requests which have its elevator data set (elevator_set_req_fn called) in q->rq->elvpriv. * If a request queue has QUEUE_FLAG_BYPASS set, elevator private data is not allocated for new requests. To switch to another iosched, we set QUEUE_FLAG_BYPASS and wait until elvpriv goes to zero; then, we attach the new iosched and clears QUEUE_FLAG_BYPASS. New implementation is much simpler and main code paths are less cluttered, IMHO. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2005-10-28[BLOCK] kill generic max_back_kb handlingTejun Heo1-5/+1
This patch kills max_back_kb handling from elv_dispatch_sort() and kills max_back_kb field from struct request_queue. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2005-10-28[PATCH] 04/05 remove last_merge handling from ioschedsTejun Heo4-114/+8
Remove last_merge handling from all ioscheds. This patch removes merging capability of noop iosched. Signed-off-by: Tejun Heo <htejun@gmail.com>
2005-10-28[PATCH] 03/05 move last_merge handlin into generic elevator codeTejun Heo1-25/+18
Currently, both generic elevator code and specific ioscheds participate in the management and usage of last_merge. This and the following patches move last_merge handling into generic elevator code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2005-10-28[PATCH] 02/05: update ioscheds to use generic dispatch queueJens Axboe4-555/+187
This patch updates all four ioscheds to use generic dispatch queue. There's one behavior change in as-iosched. * In as-iosched, when force dispatching (ELEVATOR_INSERT_BACK), batch_data_dir is reset to REQ_SYNC and changed_batch and new_batch are cleared to zero. This prevernts AS from doing incorrect update_write_batch after the forced dispatched requests are finished. * In cfq-iosched, cfqd->rq_in_driver currently counts the number of activated (removed) requests to determine whether queue-kicking is needed and cfq_max_depth has been reached. With generic dispatch queue, I think counting the number of dispatched requests would be more appropriate. * cfq_max_depth can be lowered to 1 again. Original from Tejun Heo, modified version applied. Signed-off-by: Jens Axboe <axboe@suse.de>
2005-10-28[PATCH] elevator: leftover function declarationJens Axboe1-4/+0
Signed-off-by: Jens Axboe <axboe@suse.de>
2005-10-28[PATCH] generic dispatch fixesJens Axboe1-21/+12
- Split elv_dispatch_insert() into two functions - Rename rq_last_sector() to rq_end_sector() Signed-off-by: Jens Axboe <axboe@suse.de>
2005-10-28[PATCH] 01/05 Implement generic dispatch queueTejun Heo2-82/+183
Implements generic dispatch queue which can replace all dispatch queues implemented by each iosched. This reduces code duplication, eases enforcing semantics over dispatch queue, and simplifies specific ioscheds. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2005-10-28[PATCH] fix try_module_get race in elevator_findTejun Heo1-10/+14
This patch removes try_module_get race in elevator_find. try_module_get should always be called with the spinlock protecting what the module init/cleanup routines register/unregister to held. In the case of elevators, we should be holding elv_list to avoid it going away between spin_unlock_irq and try_module_get. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2005-10-28Following the same idea, it occurs to me that we should only updateChen, Kenneth W1-0/+3
disk stat when "now" is different from disk->stamp. Otherwise, we are again needlessly adding zero to the stats. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: Jens Axboe <axboe@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 04:23:00 +0300