summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-03-22[media] it913x: get rid of it913x config structAntti Palosaari3-48/+30
We don't need it. Tuner ID and device address are enough. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] it913x: tuner power up routinesAntti Palosaari1-4/+8
Copy forgotten power up registers from it913x-fe driver. Remove two demod registers as those are already written by af9033 driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] it913x: rename functions and variablesAntti Palosaari1-34/+38
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] it913x: merge it913x_fe_suspend() to it913x_fe_sleep()Antti Palosaari1-31/+1
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] it913x: merge it913x_fe_start() to it913x_init_tuner()Antti Palosaari1-120/+45
Merge those functions to one and disable sleep. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: IT9135 dual tuner related changesAntti Palosaari2-102/+102
Now it supports IT9135 based dual tuner devices. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9033: IT9135 v2 supported related changesAntti Palosaari1-3/+28
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: basic support for IT9135 v2 chipsAntti Palosaari1-13/+30
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: merge af9035 and it9135 eeprom read routinesAntti Palosaari2-93/+73
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: USB1.1 support (== PID filters)Antti Palosaari1-3/+82
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: constify clock tablesAntti Palosaari1-2/+2
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: [0ccd:0099] TerraTec Cinergy T Stick Dual RC (rev. 2)Antti Palosaari1-1/+41
That same USB ID is used both AF9015 and AF9035 driver. iManufacturer is only thing we can select correct driver without a I/O. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9015: reject device TerraTec Cinergy T Stick Dual RC (rev. 2)Antti Palosaari1-1/+39
That same USB ID is used both AF9015 and AF9035 driver. iManufacturer is only thing we can select correct driver without a I/O. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: fix af9033 demod sampling frequencyAntti Palosaari1-0/+1
ADC needs to be also multiplied to 2 as it9135. Fixes bug I introduced few commits ago. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: add auto configuration heuristic for it9135Antti Palosaari2-34/+88
Detect automatically multiple chip versions and select configuration according to that. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: add support for 1st gen it9135Antti Palosaari3-1/+25
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9033: support for it913x tunersAntti Palosaari2-13/+36
Add support for tuners integrated to the IT9135 and IT9137. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] ITE IT913X silicon tuner driverAntti Palosaari5-0/+1514
It is tuner driver for tuner integrated to the ITE IT9135 and IT9137 chips. I split it out from the current it913x-fe driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] media/rc/imon.c: avoid flooding syslog with "unknown keypress" when ↵Kevin Baradon1-11/+0
keypad is pressed My 15c2:0036 device floods syslog when a keypad key is pressed: Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fef2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 This patch removes those messages from imon, following suggestion from Mauro. Unknown keys shall be correctly handled by rc/input layer. Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] media/rc/imon.c: make send_packet() delay larger for 15c2:0036Kevin Baradon1-4/+13
Some imon devices (like 15c2:0036) need a higher delay between send_packet calls. Default value is still 5ms to avoid regressions on already working hardware. Also use interruptible wait to avoid load average going too high (and let caller handle signals). Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] Corrected Oops on omap_vout when no manager is connectedFederico Fuga1-4/+10
If no manager is connected to the vout device, the omapvid_init() function fails. No error condition is checked, and the device is started. Later on, when irq is serviced, a NULL pointer dereference occurs. Also, the isr routine must be registered only if no error occurs, otherwise the isr triggers without the proper setup, and the kernel oops again. To prevent this, the error condition is checked, and the streamon function exits with error. Also the isr registration call is moved after the setup procedure is completed. Reviewed-by: Prabhakar Lad <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] xc5000: fix incorrect debug printnkDmitri Belimov1-7/+13
I found very small bug in xc5000 source. When set option debug=1 and listen a radio we see in dmesg xc5000: xc_SetTVStandard() Standard = M/N-NTSC/PAL-BTSC at all times. However, it should be, instead "FM Radio-INPUT1_MONO". That happens because xc5000_set_radio_freq() gets the correct value for VideoMode and AudioMode for radio and calls xc_SetTVStandard() where name of standard comes from the incorrect place priv->video_standard. This incorrect debug message makes debugging a little difficult. Signed-off-by: Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] soc_camera: remove two outdated selectsPaul Bolle1-2/+0
Release v2.6.30 removed the MT9M001_PCA9536_SWITCH and MT9V022_PCA9536_SWITCH Kconfig symbols, in commits 36034dc325ecab63c8cfb992fbf9a1a8e94738a2 ("V4L/DVB (11032): mt9m001: allow setting of bus width from board code") and e958e27adeade7fa085dd396a8a0dfaef7e338c1 ("V4L/DVB (11033): mt9v022: allow setting of bus width from board code"). These two commits removed all gpio related code from these two drivers. But they skipped removing their two selects of GPIO_PCA953X. Remove these now as they are outdated. Their dependencies can never evaluate to true anyhow. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] sh_vou: Use module_platform_driver_probe macroSachin Kamat1-12/+1
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] sh_veu: Use module_platform_driver_probe macroSachin Kamat1-12/+1
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] soc_camera/mx1_camera: Use module_platform_driver_probe macroSachin Kamat1-12/+1
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] sh_veu.c: Convert to devm_ioremap_resource()Sachin Kamat1-3/+4
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] soc_camera/pxa_camera: Convert to devm_ioremap_resource()Sachin Kamat1-3/+5
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] soc_camera/sh_mobile_csi2: Convert to devm_ioremap_resource()Sachin Kamat1-5/+4
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] soc_camera/sh_mobile_ceu_camera: Convert to devm_ioremap_resource()Sachin Kamat1-5/+4
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] mt9v022 driver: send valid HORIZONTAL_BLANKING values to mt9v024 soc ↵Andrei Andreyanau1-5/+14
camera This patch fixes the issue that appears when mt9v024 camera is used with the mt9v022 soc camera driver. The minimum total row time is 690 columns (horizontal width + horizontal blanking). The minimum horizontal blanking is 61. Thus, when the window width is set below 627, horizontal blanking must be increased. For the mt9v024 camera the values above are correct and for the mt9v022 camera the correct values are in the existing kernel driver. Signed-off-by: Andrei Andreyanau <a.andreyanau@sam-solutions.net> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] mt9m111: fix Oops - initialise context before dereferencingGuennadi Liakhovetski1-2/+3
A recent commit "[media] soc-camera: Push probe-time power management to drivers" causes an Oops during mt9m111 driver probing because its .ctx private data field is now dereferenced before it is initialised. Fix this by initialising the field earlier. Reported-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] soc-camera: mt9m111: Fix auto-exposure controlBenoît Thébaudeau1-2/+2
Commit f9bd5843658e18a7097fc7258c60fb840109eaa8 changed V4L2_CID_EXPOSURE_AUTO from boolean to enum, and commit af8425c54beb3c32cbb503a379132b3975535289 changed the creation of this control into a menu for the mt9m111. However, mt9m111_set_autoexposure() is still interpreting the value set for this control as a boolean, which also conflicts with the default value of this control set to V4L2_EXPOSURE_AUTO (0). This patch makes mt9m111_set_autoexposure() interpret the value set for V4L2_CID_EXPOSURE_AUTO as defined by enum v4l2_exposure_auto_type. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Tested-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] ts2020: use customise option correctlyPaul Bolle1-1/+1
The Kconfig entry for "TS2020 based tuners" defaults to modular if DVB_FE_CUSTOMISE is set. But that Kconfig symbol was replaced with MEDIA_SUBDRV_AUTOSELECT as of v3.7. So use the new symbol. And negate the logic, so we are in line with all the similar entries in this file. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] media: tvp514x: enable TVP514X for media controller based usageManjunath Hadli1-9/+154
add support for TVP514x as a media entity and support for pad operations. The decoder supports 1 output pad. The default format code was V4L2_MBUS_FMT_YUYV10_2X10 changed it to V4L2_MBUS_FMT_UYVY8_2X8. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] media: ths7353: add support for ths7353 video amplifierLad, Prabhakar2-62/+295
The patch adds support for THS7353 video amplifier. The the THS7353 amplifier is very much similar to the existing THS7303 video amplifier driver. This patch appropriately makes changes to the existing ths7303 driver and adds support for the THS7353. This patch also adds V4L2_IDENT_THS7353 for the THS7353 chip and appropriate changes to Kconfig file for building. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Martin Bugge <marbugge@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] davinci_vpfe: Use module_platform_driver macroSachin Kamat1-19/+1
module_platform_driver() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] Drivers: staging: media: davinci_vpfe: Use resource_size functionAlexandru Gheorghiu1-2/+1
Use resource_size function on resource object instead of explicit computation. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] solo6x10: Update TODO (maintainer change)Ismael Luceno1-2/+2
Signed-off-by: Ismael Luceno <ismael.luceno@corp.bluecherry.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] vb2-dma-sg: add debug module optionHans Verkuil1-4/+13
This prevents the kernel log from being spammed with these messages. By turning on the debug option you will see them again. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] videobuf2: add gfp_flagsHans Verkuil4-7/+9
Some drivers have special memory requirements for their buffers, usually related to DMA (e.g. GFP_DMA or __GFP_DMA32). Make it possible to specify additional GFP flags for those buffers by adding a gfp_flags field to vb2_queue. Note that this field will be replaced in the future with a different mechanism, but that is still work in progress and we need this feature now so we won't be able to convert drivers with such requirements to vb2. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Federico Vaga <federico.vaga@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] dvb-core: don't clear stats at DTV_CLEARMauro Carvalho Chehab1-1/+1
The stats are cleared by the frontend. Don't do it at DTV_CLEAR. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] drxk: Fix bogus signal strength indicatorMauro Carvalho Chehab1-30/+3
The DVBv3 signal strength indicator is bogus: it doesn't range from 0 to 65535 as it would be expected. Also, 0 means the max signal strength. Now that a better way to estimate it was added, use the new way. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] drxk: use a better calculus for RF strengthMauro Carvalho Chehab1-17/+109
The AZ6007 driver released by Terratec has a better way to estimate the signal strength, at CtrlSigStrength(). Port it to the driver. It should be noticed that there are two parameters there that are tuner-specific. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] drxk: Add pre/post BER and PER/UCB statsMauro Carvalho Chehab3-12/+172
The original az6007 driver has the code to calculate such stats. Add it to the driver, reporting them via DVBv5 stats API. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] drxk: remove dummy BER read codeMauro Carvalho Chehab1-16/+0
The BER code does nothing but filling it with zero. Remove it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] siano: make some functions staticMauro Carvalho Chehab2-5/+5
drivers/media/common/siano/smsdvb-debugfs.c:51:6: warning: no previous prototype for 'smsdvb_print_dvb_stats' [-Wmissing-prototypes] drivers/media/common/siano/smsdvb-debugfs.c:154:6: warning: no previous prototype for 'smsdvb_print_isdb_stats' [-Wmissing-prototypes] drivers/media/common/siano/smsdvb-debugfs.c:244:6: warning: no previous prototype for 'smsdvb_print_isdb_stats_ex' [-Wmissing-prototypes] drivers/media/common/siano/smscoreapi.c:832:5: warning: no previous prototype for 'smscore_configure_board' [-Wmissing-prototypes] drivers/media/common/siano/smscoreapi.c:1301:5: warning: no previous prototype for 'smscore_init_device' [-Wmissing-prototypes] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] siano: Fix the remaining checkpatch.pl compliantsMauro Carvalho Chehab3-17/+9
Fix all other remaining checkpatch.pl compliants on the Siano driver, except for the 80-cols (soft) limit. Those are harder to fix, and probably not worth to do right now. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] siano: remove the remaining CamelCase compliantsMauro Carvalho Chehab8-253/+253
Remove the remaining CamelCase checkpatch.pl compliants. There are still a few left, but those are due to USB and DVB APIs. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] siano: fix checkpatch.pl compliants on smscoreapi.hMauro Carvalho Chehab1-5/+9
Fix the remaining checkpatch.pl compliants at smscoreapi.h, except by the "line over 80 characters" on comments. Fixing those would require more time, as the better is to convert them into the struct descriptions used inside the kernel, as described at: Documentation/kernel-doc-nano-HOWTO.txt Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-03 02:54:06 +0300