| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The HCDP and MPS tables are Itanium specific EFI config tables, so
move their handling to ia64 arch code.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Some plumbing exists to handle a UEFI configuration table of type
BOOT_INFO but since we never match it to a GUID anywhere, we never
actually register such a table, or access it, for that matter. So
simply drop all mentions of it.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
One of the advantages of using what basically amounts to a callback
interface into the bootloader for loading the initrd is that it provides
a natural place for the bootloader or firmware to measure the initrd
contents while they are being passed to the kernel.
Unfortunately, this is not a guarantee that the initrd will in fact be
loaded and its /init invoked by the kernel, since the command line may
contain the 'noinitrd' option, in which case the initrd is ignored, but
this will not be reflected in the PCR that covers the initrd measurement.
This could be addressed by measuring the command line as well, and
including that PCR in the attestation policy, but this locks down the
command line completely, which may be too restrictive.
So let's take the noinitrd argument into account in the stub, too. This
forces any PCR that covers the initrd to assume a different value when
noinitrd is passed, allowing an attestation policy to disregard the
command line if there is no need to take its measurement into account
for other reasons.
As Peter points out, this would still require the agent that takes the
measurements to measure a separator event into the PCR in question at
ExitBootServices() time, to prevent replay attacks using the known
measurement from the TPM log.
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
There are currently two ways to specify the initrd to be passed to the
Linux kernel when booting via the EFI stub:
- it can be passed as a initrd= command line option when doing a pure PE
boot (as opposed to the EFI handover protocol that exists for x86)
- otherwise, the bootloader or firmware can load the initrd into memory,
and pass the address and size via the bootparams struct (x86) or
device tree (ARM)
In the first case, we are limited to loading from the same file system
that the kernel was loaded from, and it is also problematic in a trusted
boot context, given that we cannot easily protect the command line from
tampering without either adding complicated white/blacklisting of boot
arguments or locking down the command line altogether.
In the second case, we force the bootloader to duplicate knowledge about
the boot protocol which is already encoded in the stub, and which may be
subject to change over time, e.g., bootparams struct definitions, memory
allocation/alignment requirements for the placement of the initrd etc etc.
In the ARM case, it also requires the bootloader to modify the hardware
description provided by the firmware, as it is passed in the same file.
On systems where the initrd is measured after loading, it creates a time
window where the initrd contents might be manipulated in memory before
handing over to the kernel.
Address these concerns by adding support for loading the initrd into
memory by invoking the EFI LoadFile2 protocol installed on a vendor
GUIDed device path that specifically designates a Linux initrd.
This addresses the above concerns, by putting the EFI stub in charge of
placement in memory and of passing the base and size to the kernel proper
(via whatever means it desires) while still leaving it up to the firmware
or bootloader to obtain the file contents, potentially from other file
systems than the one the kernel itself was loaded from. On platforms that
implement measured boot, it permits the firmware to take the measurement
right before the kernel actually consumes the contents.
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
In preparation of adding support for loading the initrd via a special
device path, add the struct definition of a vendor GUIDed device path
node to efi.h.
Since we will be producing these data structures rather than just
consumsing the ones instantiated by the firmware, refactor the various
device path node definitions so we can take the size of each node using
sizeof() rather than having to resort to opaque arithmetic in the static
initializers.
While at it, drop the #if IS_ENABLED() check for the declaration of
efi_get_device_by_path(), which is unnecessary, and constify its first
argument as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
In efi_capsule_write() the value 0 assigned to ret is never used.
Identified with cppcheck.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Link: https://lore.kernel.org/r/20200223205435.114915-1-xypron.glpk@gmx.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Remove an unused variable in __init efi_esrt_init().
Simplify a logical constraint.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Link: https://lore.kernel.org/r/20200223204557.114634-1-xypron.glpk@gmx.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The memory for files is allocated not reallocated.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Link: https://lore.kernel.org/r/20200221191829.18149-1-xypron.glpk@gmx.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Provide descriptions for the functions invoking the EFI_RNG_PROTOCOL.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Link: https://lore.kernel.org/r/20200221114716.4372-1-xypron.glpk@gmx.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Update the description of of efi_relocate_kernel() to match Sphinx style.
Update parameter references in the description of other memory functions
to use @param style.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200220065317.9096-1-xypron.glpk@gmx.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Provide descriptions of:
* efi_get_memory_map()
* efi_low_alloc_above()
* efi_free()
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200218063038.3436-1-xypron.glpk@gmx.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Do not check the value of status twice.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Link: https://lore.kernel.org/r/20200216184050.3100-1-xypron.glpk@gmx.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Provide a Sphinx style function description for efi_allocate_pages().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Link: https://lore.kernel.org/r/20200216171340.6070-1-xypron.glpk@gmx.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add the protocol definitions, GUIDs and mixed mode glue so that
the EFI loadfile protocol can be used from the stub. This will
be used in a future patch to load the initrd.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
We will be adding support for loading the initrd from a GUIDed
device path in a subsequent patch, so update the prototype of
the LocateDevicePath() boot service to make it callable from
our code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
We currently parse the command non-destructively, to avoid having to
allocate memory for a copy before passing it to the standard parsing
routines that are used by the core kernel, and which modify the input
to delineate the parsed tokens with NUL characters.
Instead, we call strstr() and strncmp() to go over the input multiple
times, and match prefixes rather than tokens, which implies that we
would match, e.g., 'nokaslrfoo' in the stub and disable KASLR, while
the kernel would disregard the option and run with KASLR enabled.
In order to avoid having to reason about whether and how this behavior
may be abused, let's clean up the parsing routines, and rebuild them
on top of the existing helpers.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
On x86, the preferred load address of the initrd is still below 4 GB,
even though in some cases, we can cope with an initrd that is loaded
above that.
To simplify the code, and to make it more straightforward to introduce
other ways to load the initrd, pass the soft and hard memory limits at
the same time, and let the code handling the initrd= command line option
deal with this.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The file I/O routine that is used to load initrd or dtb files from
the EFI system partition suffers from a few issues:
- it converts the u8[] command line back to a UTF-16 string, which is
pointless since we only handle initrd or dtb arguments provided via
the loaded image protocol anyway, which is where we got the UTF-16[]
command line from in the first place when booting via the PE entry
point,
- in the far majority of cases, only a single initrd= option is present,
but it optimizes for multiple options, by going over the command line
twice, allocating heap buffers for dynamically sized arrays, etc.
- the coding style is hard to follow, with few comments, and all logic
including string parsing etc all combined in a single routine.
Let's fix this by rewriting most of it, based on the idea that in the
case of multiple initrds, we can just allocate a new, bigger buffer
and copy over the data before freeing the old one.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Split off the file I/O support code into a separate source file so
it ends up in a separate object file in the static library, allowing
the linker to omit it if the routines are not used.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
get_dram_base() is only called from arm-stub.c so move it into
the same source file as its caller.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
efi_random_alloc() is only used on arm64, but as it shares a source
file with efi_random_get_seed(), the latter will pull in the former
on other architectures as well.
Let's take advantage of the fact that libstub is a static library,
and so the linker will only incorporate objects that are needed to
satisfy dependencies in other objects. This means we can move the
random alloc code to a separate source file that gets built
unconditionally, but only used when needed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
We now support cmdline data that is located in memory that is not
32-bit addressable, so relax the allocation limit on systems where
this feature is enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Move all the declarations that are only used in stub code from
linux/efi.h to efistub.h which is only included locally.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
We now support bootparams structures that are located in memory that
is not 32-bit addressable, so relax the allocation limit on systems
where this feature is enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Align the naming of efi_file_io_interface_t and efi_file_handle_t with
the UEFI spec, and call them efi_simple_file_system_protocol_t and
efi_file_protocol_t, respectively, using the same convention we use
for all other type definitions that originate in the UEFI spec.
While at it, move the definitions to efistub.h, so they are only seen
by code that needs them.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Most of the EFI stub source files of all architectures reside under
drivers/firmware/efi/libstub, where they share a Makefile with special
CFLAGS and an include file with declarations that are only relevant
for stub code.
Currently, we carry a lot of stub specific stuff in linux/efi.h only
because eboot.c in arch/x86 needs them as well. So let's move eboot.c
into libstub/, and move the contents of eboot.h that we still care
about into efistub.h
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The implementation of efi_high_alloc() uses a complicated way of
traversing the memory map to find an available region that is located
as close as possible to the provided upper limit, and calls AllocatePages
subsequently to create the allocation at that exact address.
This is precisely what the EFI_ALLOCATE_MAX_ADDRESS allocation type
argument to AllocatePages() does, and considering that EFI_ALLOC_ALIGN
only exceeds EFI_PAGE_SIZE on arm64, let's use AllocatePages() directly
and implement the alignment using code that the compiler can remove if
it does not exceed EFI_PAGE_SIZE.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Create a new source file mem.c to keep the routines involved in memory
allocation and deallocation and manipulation of the EFI memory map.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The arm64 kernel no longer requires the FDT blob to fit inside a
naturally aligned 2 MB memory block, so remove the code that aligns
the allocation to 2 MB.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Instead of setting the visibility pragma for a small set of symbol
declarations that could result in absolute references that we cannot
support in the stub, declare hidden visibility for all code in the
EFI stub, which is more robust and future proof.
To ensure that the #pragma is taken into account before any other
includes are processed, put it in a header file of its own and
include it via the compiler command line using the -include option.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertenly introduced[3] to the codebase from now on.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200211231421.GA15697@embeddedor
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The UEFI spec defines (and deprecates) a misguided and shortlived
memory protection feature that is based on splitting memory regions
covering PE/COFF executables into separate code and data regions,
without annotating them as belonging to the same executable image.
When the OS assigns the virtual addresses of these regions, it may
move them around arbitrarily, without taking into account that the
PE/COFF code sections may contain relative references into the data
sections, which means the relative placement of these segments has
to be preserved or the executable image will be corrupted.
The original workaround on arm64 was to ensure that adjacent regions
of the same type were mapped adjacently in the virtual mapping, but
this requires sorting of the memory map, which we would prefer to
avoid.
Considering that the native physical mapping of the PE/COFF images
does not suffer from this issue, let's preserve it at runtime, and
install it as the virtual mapping as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Some (somewhat older) laptops have a correct BGRT table, except that the
version field is 0 instead of 1.
This has been seen on several Ivy Bridge based Lenovo models.
For now the spec. only defines version 1, so it is reasonably safe to
assume that tables with a version of 0 really are version 1 too,
which is what this commit does so that the BGRT table will be accepted
by the kernel on laptop models with this issue.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200131130623.33875-1-hdegoede@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Expose efi_entry() as the PE/COFF entrypoint directly, instead of
jumping into a wrapper that fiddles with stack buffers and other
stuff that the compiler is much better at. The only reason this
code exists is to obtain a pointer to the base of the image, but
we can get the same value from the loaded_image protocol, which
we already need for other reasons anyway.
Update the return type as well, to make it consistent with what
is required for a PE/COFF executable entrypoint.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are more
natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: make multiple directory targets work
kconfig: Invalidate all symbols after changing to y or m.
kallsyms: fix type of kallsyms_token_table[]
scripts/kallsyms: change table to store (strcut sym_entry *)
scripts/kallsyms: rename local variables in read_symbol()
kbuild: rename hostprogs-y/always to hostprogs/always-y
kbuild: fix the document to use extra-y for vmlinux.lds
kconfig: fix broken dependency in randconfig-generated .config
|
|
In order to allow the GICv4 code to link properly on 32bit ARM,
make sure we don't use 64bit divisions when it isn't strictly
necessary.
Fixes: 4e6437f12d6e ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt fixes from Thomas Gleixner:
"A set of fixes for the interrupt subsystem:
- Provision only ACPI enabled redistributors on GICv3
- Use the proper command colums when building the INVALL command for
the GICv3-ITS
- Ensure the allocation of the L2 vPE table for GICv4.1
- Correct the GICv4.1 VPROBASER programming so it uses the proper
size
- A set of small GICv4.1 tidy up patches
- Configuration cleanup for C-SKY interrupt chip
- Clarify the function documentation for irq_set_wake() to document
that the wakeup functionality is orthogonal to the irq
disable/enable mechanism"
* tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessors
irqchip/gic-v3-its: Remove superfluous WARN_ON
irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd()
irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level
irqchip/gic-v4.1: Set vpe_l1_base for all redistributors
irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZE
genirq: Clarify that irq wake state is orthogonal to enable/disable
irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL
irqchip: Some Kconfig cleanup for C-SKY
irqchip/gic-v3: Only provision redistributors that are enabled in ACPI
|
|
Pull misc SCSI fixes from James Bottomley:
"Five small patches, all in drivers or doc, which missed the initial
pull request.
The qla2xxx and megaraid_sas are actual fixes and the rest are
spelling and doc changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: fix spelling mistake "initilized" -> "initialized"
scsi: pm80xx: fix spelling mistake "to" -> "too"
scsi: MAINTAINERS: ufs: remove pedrom.sousa@synopsys.com
scsi: megaraid_sas: fixup MSIx interrupt setup during resume
scsi: qla2xxx: Fix unbound NVME response length
|
|
Pull networking fixes from David Miller:
1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris.
2) Fix thermal zone registration in iwlwifi, from Andrei
Otcheretianski.
3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer.
4) Use after free in mptcp, from Florian Westphal.
5) Use after free in wireguard's root_remove_peer_lists, from Eric
Dumazet.
6) Properly access packets heads in bonding alb code, from Eric
Dumazet.
7) Fix data race in skb_queue_len(), from Qian Cai.
8) Fix regression in r8169 on some chips, from Heiner Kallweit.
9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang.
10) Certain kinds of set link netlink operations can cause a NULL deref
in the ipv6 addrconf code. Fix from Eric Dumazet.
11) Don't cancel uninitialized work queue in drop monitor, from Ido
Schimmel.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: thunderx: use proper interface type for RGMII
mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap
bpf: Improve bucket_log calculation logic
selftests/bpf: Test freeing sockmap/sockhash with a socket in it
bpf, sockhash: Synchronize_rcu before free'ing map
bpf, sockmap: Don't sleep while holding RCU lock on tear-down
bpftool: Don't crash on missing xlated program instructions
bpf, sockmap: Check update requirements after locking
drop_monitor: Do not cancel uninitialized work item
mlxsw: spectrum_dpipe: Add missing error path
mlxsw: core: Add validation of hardware device types for MGPIR register
mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort
selftests: mlxsw: Add test cases for local table route replacement
mlxsw: spectrum_router: Prevent incorrect replacement of local table routes
net: dsa: microchip: enable module autoprobe
ipv6/addrconf: fix potential NULL deref in inet6_set_link_af()
dpaa_eth: support all modes with rate adapting PHYs
net: stmmac: update pci platform data to use phy_interface
net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter
net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter
...
|
|
This is a merge error on my part - the driver was merged into mainline
by commit c5951e7c8ee5 ("Merge tag 'mips_5.6' of git://../mips/linux")
over a week ago, but nobody apparently noticed that it didn't actually
build due to still having a reference to the devm_ioremap_nocache()
function, removed a few days earlier through commit 6a1000bd2703 ("Merge
tag 'ioremap-5.6' of git://../ioremap").
Apparently this didn't get any build testing anywhere. Not perhaps all
that surprising: it's restricted to 64-bit MIPS only, and only with the
new SGI_MFD_IOC3 support enabled.
I only noticed because the ioremap conflicts in the ARM SoC driver
update made me check there weren't any others hiding, and I found this
one.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull ARM SoC late updates from Olof Johansson:
"This is some material that we picked up into our tree late, or that
had more complex dependencies on more than one topic branch that makes
sense to keep separately.
- TI support for secure accelerators and hwrng on OMAP4/5
- TI camera changes for dra7 and am437x and SGX improvement due to
better reset control support on am335x, am437x and dra7
- Davinci moves to proper clocksource on DM365, and regulator/audio
improvements for DM365 and DM644x eval boards"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem
ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt
ARM: dts: Configure interconnect target module for am437x sgx
ARM: dts: Configure sgx for dra7
ARM: dts: Configure rstctrl reset for am335x SGX
ARM: dts: dra7: Add ti-sysc node for VPE
ARM: dts: dra7: add vpe clkctrl node
ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries
ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries
ARM: dts: am43xx: add support for clkout1 clock
arm: dts: dra76-evm: Add CAL and OV5640 nodes
arm: dtsi: dra76x: Add CAL dtsi node
arm: dts: dra72-evm-common: Add entries for the CSI2 cameras
ARM: dts: DRA72: Add CAL dtsi node
ARM: dts: dra7-l4: Add ti-sysc node for CAM
ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
ARM: dts: dra7: add cam clkctrl node
ARM: OMAP2+: Drop legacy platform data for omap4 des
ARM: OMAP2+: Drop legacy platform data for omap4 sham
ARM: OMAP2+: Drop legacy platform data for omap4 aes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller
pieces for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support
ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
and misc cleanups, refactorings of Marvell, TI, other platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
drivers: soc: xilinx: Use mailbox IPI callback
dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
MAINTAINERS: Add brcmstb PCIe controller entry
soc/tegra: fuse: Unmap registers once they are not needed anymore
soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
soc/tegra: fuse: Warn if straps are not ready
soc/tegra: fuse: Cache values of straps and Chip ID registers
memory: tegra30-emc: Correct error message for timed out auto calibration
memory: tegra30-emc: Firm up hardware programming sequence
memory: tegra30-emc: Firm up suspend/resume sequence
soc/tegra: regulators: Do nothing if voltage is unchanged
memory: tegra: Correct reset value of xusb_hostr
soc/tegra: fuse: Add APB DMA dependency for Tegra20
bus: tegra-aconnect: Remove PM_CLK dependency
dt-bindings: mediatek: add MT6765 power dt-bindings
soc: mediatek: cmdq: delete not used define
memory: tegra: Add support for the Tegra194 memory controller
memory: tegra: Only include support for enabled SoCs
memory: tegra: Support DVFS on Tegra186 and later
...
|
|
Pull ARM Device-tree updates from Olof Johansson:
"New SoCs:
- Atmel/Microchip SAM9X60 (ARM926 SoC)
- OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all
variants of it with different GPU/media IP configurations.
- ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU)
- ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of
db8500)
- Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem)
- Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class)
New boards:
- Allwinner:
+ Emlid Neutis SoM (H3 variant)
+ Libre Computer ALL-H3-IT
+ PineH64 Model B
- Amlogic:
+ Libretech Amlogic GX PC (s905d and s912-based variants)
- Atmel/Microchip:
+ Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1)
- Marvell:
+ Armada 385-based SolidRun Clearfog GTR
- NXP:
+ Gateworks GW59xx boards based on i.MX6/6Q/6QDL
+ Tolino Shine 3 eBook reader (i.MX6sl)
+ Embedded Artists COM (i.MX7ULP)
+ SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems)
+ Google Coral Edge TPU (i.MX8MQ)
- Rockchip:
+ Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs)
+ Radxa Rock Pi N10 (RK3399Pro-based)
+ VMARC RK3399Pro SOM
- ST:
+ Reference boards for stm32mp15
- ST Ericsson:
+ Samsung Galaxy S III mini (GT-I8190)
+ HREF520 reference board for DB8520
- TI OMAP:
+ Gen1 Amazon Echo (OMAP3630-based)
- Qualcomm:
+ Inforce 6640 Single Board Computer (msm8996-based)
+ SC7180 IDP (SC7180-based)"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits)
dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml
arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera
arm64: dts: ti: k3-am65-main Add CAL node
arm64: dts: ti: k3-j721e-main: Add McASP nodes
arm64: dts: ti: k3-am654-main: Add McASP nodes
arm64: dts: ti: k3-j721e: DMA support
arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss
arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation
arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS
arm64: dts: ti: k3-am65: DMA support
arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss
arm64: dts: ti: k3-am65-main: Correct main NAVSS representation
ARM: dts: aspeed: rainier: Add UCD90320 power sequencer
ARM: dts: aspeed: rainier: Switch PSUs to unknown version
arm64: dts: rockchip: Kill off "simple-panel" compatibles
ARM: dts: rockchip: Kill off "simple-panel" compatibles
arm64: dts: rockchip: rename dwmmc node names to mmc
ARM: dts: rockchip: rename dwmmc node names to mmc
arm64: dts: exynos: Rename Samsung and Exynos to lowercase
arm64: dts: uniphier: add reset-names to NAND controller node
...
|
|
Pull ARM SoC platform updates from Olof Johansson:
"Most of these are smaller fixes that have accrued, and some continued
cleanup of OMAP platforms towards shared frameworks.
One new SoC from Atmel/Microchip: sam9x60"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
ARM: OMAP2+: Fix undefined reference to omap_secure_init
ARM: s3c64xx: Drop unneeded select of TIMER_OF
ARM: exynos: Drop unneeded select of MIGHT_HAVE_CACHE_L2X0
ARM: s3c24xx: Switch to atomic pwm API in rx1950
ARM: OMAP2+: sleep43xx: Call secure suspend/resume handlers
ARM: OMAP2+: Use ARM SMC Calling Convention when OP-TEE is available
ARM: OMAP2+: Introduce check for OP-TEE in omap_secure_init()
ARM: OMAP2+: Add omap_secure_init callback hook for secure initialization
ARM: at91: Documentation: add sam9x60 product and datasheet
ARM: at91: pm: use of_device_id array to find the proper shdwc node
ARM: at91: pm: use SAM9X60 PMC's compatible
ARM: imx: only select ARM_ERRATA_814220 for ARMv7-A
ARM: zynq: use physical cpuid in zynq_slcr_cpu_stop/start
ARM: tegra: Use clk_m CPU on Tegra124 LP1 resume
ARM: tegra: Modify reshift divider during LP1
ARM: tegra: Enable PLLP bypass during Tegra124 LP1
ARM: samsung: Rename Samsung and Exynos to lowercase
ARM: exynos: Correct the help text for platform Kconfig option
ARM: bcm: Select ARM_AMBA for ARCH_BRCMSTB
ARM: brcmstb: Add debug UART entry for 7216
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs file system parameter updates from Al Viro:
"Saner fs_parser.c guts and data structures. The system-wide registry
of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
the horror switch() in fs_parse() that would have to grow another case
every time something got added to that system-wide registry.
New syntax types can be added by filesystems easily now, and their
namespace is that of functions - not of system-wide enum members. IOW,
they can be shared or kept private and if some turn out to be widely
useful, we can make them common library helpers, etc., without having
to do anything whatsoever to fs_parse() itself.
And we already get that kind of requests - the thing that finally
pushed me into doing that was "oh, and let's add one for timeouts -
things like 15s or 2h". If some filesystem really wants that, let them
do it. Without somebody having to play gatekeeper for the variants
blessed by direct support in fs_parse(), TYVM.
Quite a bit of boilerplate is gone. And IMO the data structures make a
lot more sense now. -200LoC, while we are at it"
* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
tmpfs: switch to use of invalfc()
cgroup1: switch to use of errorfc() et.al.
procfs: switch to use of invalfc()
hugetlbfs: switch to use of invalfc()
cramfs: switch to use of errofc() et.al.
gfs2: switch to use of errorfc() et.al.
fuse: switch to use errorfc() et.al.
ceph: use errorfc() and friends instead of spelling the prefix out
prefix-handling analogues of errorf() and friends
turn fs_param_is_... into functions
fs_parse: handle optional arguments sanely
fs_parse: fold fs_parameter_desc/fs_parameter_spec
fs_parser: remove fs_parameter_description name field
add prefix to fs_context->log
ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
new primitive: __fs_parse()
switch rbd and libceph to p_log-based primitives
struct p_log, variants of warnf() et.al. taking that one instead
teach logfc() to handle prefices, give it saner calling conventions
get rid of cg_invalf()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
- bmap series from cmaiolino
- getting rid of convolutions in copy_mount_options() (use a couple of
copy_from_user() instead of the __get_user() crap)
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
saner copy_mount_options()
fibmap: Reject negative block numbers
fibmap: Use bmap instead of ->bmap method in ioctl_fibmap
ecryptfs: drop direct calls to ->bmap
cachefiles: drop direct usage of ->bmap method.
fs: Enable bmap() function to properly return errors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes for 5.6, take #1 from Marc Zyngier:
- Guarantee allocation of L2 vPE table for GICv4.1
- Fix GICv4.1 VPROPBASER programming
- Numerous GICv4.1 tidy ups
- Fix disabled GICv3 redistributor provisioning with ACPI
- KConfig cleanup for C-SKY
|
|
The configuration of the OCTEONTX XCV_DLL_CTL register via
xcv_init_hw() is such that the RGMII RX delay is bypassed
leaving the RGMII TX delay enabled in the MAC:
/* Configure DLL - enable or bypass
* TX no bypass, RX bypass
*/
cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL);
cfg &= ~0xFF03;
cfg |= CLKRX_BYP;
writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL);
This would coorespond to a interface type of PHY_INTERFACE_MODE_RGMII_RXID
and not PHY_INTERFACE_MODE_RGMII.
Fixing this allows RGMII PHY drivers to do the right thing (enable
RX delay in the PHY) instead of erroneously enabling both delays in the
PHY.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.6
First set of fixes for v5.6. Buffer overflow fixes to mwifiex, quite a
few functionality fixes to iwlwifi and smaller fixes to other drivers.
mwifiex
* fix an unlock from a previous security fix
* fix two buffer overflows
libertas
* fix two bugs from previous security fixes
iwlwifi
* fix module removal with multiple NICs
* don't treat IGTK removal failure as an error
* avoid FW crashes due to DTS measurement races
* fix a potential use after free in FTM code
* prevent a NULL pointer dereference in iwl_mvm_cfg_he_sta()
* fix TDLS discovery
* check all CPUs when trying to detect an error during resume
rtw88
* fix clang warning
mt76
* fix reading of max_nss value from a register
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2020-02-07
The following pull-request contains BPF updates for your *net* tree.
We've added 15 non-merge commits during the last 10 day(s) which contain
a total of 12 files changed, 114 insertions(+), 31 deletions(-).
The main changes are:
1) Various BPF sockmap fixes related to RCU handling in the map's tear-
down code, from Jakub Sitnicki.
2) Fix macro state explosion in BPF sk_storage map when calculating its
bucket_log on allocation, from Martin KaFai Lau.
3) Fix potential BPF sockmap update race by rechecking socket's established
state under lock, from Lorenz Bauer.
4) Fix crash in bpftool on missing xlated instructions when kptr_restrict
sysctl is set, from Toke Høiland-Jørgensen.
5) Fix i40e's XSK wakeup code to return proper error in busy state and
various misc fixes in xdpsock BPF sample code, from Maciej Fijalkowski.
6) Fix the way modifiers are skipped in BTF in the verifier while walking
pointers to avoid program rejection, from Alexei Starovoitov.
7) Fix Makefile for runqslower BPF tool to i) rebuild on libbpf changes and
ii) to fix undefined reference linker errors for older gcc version due to
order of passed gcc parameters, from Yulia Kartseva and Song Liu.
8) Fix a trampoline_count BPF kselftest warning about missing braces around
initializer, from Andrii Nakryiko.
9) Fix up redundant "HAVE" prefix from large INSN limit kernel probe in
bpftool, from Michal Rostecki.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
