summaryrefslogtreecommitdiff
path: root/drivers/watchdog/sp805_wdt.c
AgeCommit message (Collapse)AuthorFilesLines
2012-06-21Viresh has movedViresh Kumar1-2/+2
viresh.kumar@st.com email-id doesn't exist anymore as I have left the company. Replace ST's id with viresh.linux@gmail.com. It also updates .mailmap file to fix address for 'git shortlog' Signed-off-by: Viresh Kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30watchdog: sp805_wdt: Add clk_{un}prepare supportViresh Kumar1-0/+8
clk_{un}prepare() routines are required for required on some platforms to run part of clk enable/disable() routines from contexts that can schedule. This patch adds support for these routines in sp805 driver. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: sp805_wdt: convert to watchdog coreViresh Kumar1-159/+82
This patch converts existing sp805 watchdog driver to use already in place common infrastructure present in watchdog core. With this lot of code goes away. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-03-27watchdog: sp805: Use devm routinesViresh Kumar1-22/+13
sp805 driver currently uses normal kzalloc, ioremap, etc routines. This patch replaces these routines with devm_kzalloc and devm_request_mem_region etc, so that we don't need to handle freeing of resources for error cases and module removal routine. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-03-27watchdog: sp805: replace readl/writel with lighter _relaxed variantsViresh Kumar1-12/+12
readl/writel versions for ARM contain memory barrier instruction for synchronizing DMA buffers. These are not required at least on this module. So use lighter _relaxed variants. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-03-27watchdog: sp805: Fix documentation style commentViresh Kumar1-8/+7
@ was missing before variables names, in their description. Also adev is mentioned as dev in comment. Fix both these issues. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-03-27watchdog: nowayout is boolWim Van Sebroeck1-2/+2
nowayout is actually a boolean value. So make it bool for all watchdog device drivers. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-03-27watchdog: sp805_wdt: add pm callbacks to support standby/S2R/hibernationViresh Kumar1-0/+33
Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-03-17ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driverviresh kumar1-11/+1
For simple modules that contain a single amba_driver without any additional setup code then ends up being a block of duplicated boilerplate. This patch adds a new macro, module_amba_driver(), which replaces the module_init()/module_exit() registrations with template functions. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-07Merge branch 'amba-modalias' of ↵Linus Torvalds1-0/+2
git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: sound: aaci: Enable module alias autogeneration for AMBA drivers watchdog: sp805: Enable module alias autogeneration for AMBA drivers fbdev: amba: Enable module alias autogeneration for AMBA drivers serial: pl011: Enable module alias autogeneration for AMBA drivers serial: pl010: Enable module alias autogeneration for AMBA drivers spi: pl022: Enable module alias autogeneration for AMBA drivers rtc: pl031: Enable module alias autogeneration for AMBA drivers rtc: pl030: Enable module alias autogeneration for AMBA drivers mmc: mmci: Enable module alias autogeneration for AMBA drivers input: ambakmi: Enable module alias autogeneration for AMBA drivers gpio: pl061: Enable module alias autogeneration for AMBA drivers dmaengine: pl330: Enable module alias autogeneration for AMBA drivers dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers hwrng: nomadik: Enable module alias autogeneration for AMBA drivers ARM: amba: Auto-generate AMBA driver module aliases during modpost ARM: amba: Move definition of struct amba_id to mod_devicetable.h
2011-12-26watchdog: sp805: Fix section mismatch in ID table.Nick Bowler1-1/+1
The AMBA ID table is marked as __initdata, yet it is referenced by the driver struct which is not. This causes a (somewhat unhelpful) section mismatch warning: WARNING: drivers/watchdog/sp805_wdt.o(.data+0x4c): Section mismatch in reference from the variable sp805_wdt_driver to the (unknown reference) .init.data:(unknown) Fix this by removing the annotation. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-22watchdog: sp805: Enable module alias autogeneration for AMBA driversDave Martin1-0/+2
Signed-off-by: Dave Martin <dave.martin@linaro.org>
2011-07-27watchdog: sp805: Flush posted writes in enable/disable.Nick Bowler1-0/+4
There are no reads in these functions, so if MMIO writes are posted, the writes in enable/disable may not have completed by the time these functions return. If the functions run from different CPUs, it's in theory possible for the writes to be interleaved, which would be disastrous for this driver. At the very least, we need an mmiowb() before releasing the lock, but since it seems desirable for the watchdog timer to be actually stopped or reset when these functions return, read the lock register to force the writes out. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-27watchdog: sp805: Don't write 0 to the load value register.Nick Bowler1-1/+0
At least on the Versatile Express' V2M, calling wdt_disable followed by wdt_enable, for instance by running the following sequence: echo V > /dev/watchdog; echo V > /dev/watchdog results in an immediate reset. The wdt_disable function writes 0 to the load register; while the watchdog interrupts are disabled at this point, this special value is defined to trigger an interrupt immediately. It appears that in this instance, the reset happens when the interrupts are subsequently enabled by wdt_enable. Putting in a short delay after writing a new load value in wdt_enable solves the issue, but it seems cleaner to simply never write 0 to the load register at all: according to the hardware docs, writing 0 to the control register suffices to stop the counter, and the write of 0 to the load register is questionable anyway since this register resets to 0xffffffff. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-02-23ARM: amba: make probe() functions take const id tablesRussell King1-1/+1
Make Primecell driver probe functions take a const pointer to their ID tables. Drivers should never modify their ID tables in their probe handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-08watchdog: Adding support for ARM Primecell SP805 WatchdogViresh KUMAR1-0/+387
Technical Reference Manual can be found at: http://infocenter.arm.com/help/topic/com.arm.doc.ddi0270b/DDI0270.pdf Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 08:45:02 +0300