summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)AuthorFilesLines
2013-11-14Merge branch 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-0/+5
Pull DMA mask updates from Russell King: "This series cleans up the handling of DMA masks in a lot of drivers, fixing some bugs as we go. Some of the more serious errors include: - drivers which only set their coherent DMA mask if the attempt to set the streaming mask fails. - drivers which test for a NULL dma mask pointer, and then set the dma mask pointer to a location in their module .data section - which will cause problems if the module is reloaded. To counter these, I have introduced two helper functions: - dma_set_mask_and_coherent() takes care of setting both the streaming and coherent masks at the same time, with the correct error handling as specified by the API. - dma_coerce_mask_and_coherent() which resolves the problem of drivers forcefully setting DMA masks. This is more a marker for future work to further clean these locations up - the code which creates the devices really should be initialising these, but to fix that in one go along with this change could potentially be very disruptive. The last thing this series does is prise away some of Linux's addition to "DMA addresses are physical addresses and RAM always starts at zero". We have ARM LPAE systems where all system memory is above 4GB physical, hence having DMA masks interpreted by (eg) the block layers as describing physical addresses in the range 0..DMAMASK fails on these platforms. Santosh Shilimkar addresses this in this series; the patches were copied to the appropriate people multiple times but were ignored. Fixing this also gets rid of some ARM weirdness in the setup of the max*pfn variables, and brings ARM into line with every other Linux architecture as far as those go" * 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits) ARM: 7805/1: mm: change max*pfn to include the physical offset of memory ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit() ARM: DMA-API: better handing of DMA masks for coherent allocations ARM: 7857/1: dma: imx-sdma: setup dma mask DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks DMA-API: dcdbas: update DMA mask handing DMA-API: dma: edma.c: no need to explicitly initialize DMA masks DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks DMA-API: crypto: remove last references to 'static struct device *dev' DMA-API: crypto: fix ixp4xx crypto platform device support DMA-API: others: use dma_set_coherent_mask() DMA-API: staging: use dma_set_coherent_mask() DMA-API: usb: use new dma_coerce_mask_and_coherent() DMA-API: usb: use dma_set_coherent_mask() DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent() DMA-API: net: octeon: use dma_coerce_mask_and_coherent() DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent() ...
2013-11-13drivers/video/backlight/hx8357.c: remove redundant of_match_ptrSachin Kamat1-1/+1
'hx8357_dt_ids' is always compiled in. Hence of_match_ptr is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: use gpio_request_oneJohan Hovold1-7/+8
Use devm_gpio_request_one rather than requesting and setting direction in two calls. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: refactor gpio_on handlingJohan Hovold1-12/+11
Add helper function to control the gpio_on signal. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: use gpio_is_validJohan Hovold1-4/+4
Use gpio_is_valid rather than open coding the more restrictive != -1 test. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: remove unused includeJohan Hovold1-1/+0
Remove unused include of clk.h. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: clean up get_intensityJohan Hovold1-7/+6
Clean up get_intensity to increase readability. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: clean up probe error handlingJohan Hovold1-19/+12
Clean up probe error handling by checking parameters before any allocations and removing an obsolete error label. Also remove unnecessary reset of private gpio number. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: fix module autoloadJohan Hovold1-0/+1
Add missing module alias which is needed for module autoloading. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: fix gpio polarity in removeJohan Hovold1-2/+4
Make sure to honour gpio polarity also at remove so that the backlight is actually disabled on boards with active-low enable pin. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: fix reported brightnessJohan Hovold1-2/+2
The driver supports 16-bit brightness values, but the value returned from get_brightness was truncated to eight bits. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13drivers/video/backlight/lm3630a_bl.c: add missing destroy_workqueue() on ↵Wei Yongjun1-0/+1
error in lm3630a_intr_config() Add the missing destroy_workqueue() before return from lm3630a_intr_config() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: s6e63m0: use devm_{backlight,lcd}_device_register()Jingoo Han1-13/+7
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: cr_bllcd: use devm_{backlight,lcd}_device_register()Jingoo Han1-8/+5
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: corgi_lcd: use devm_{backlight,lcd}_device_register()Jingoo Han1-19/+9
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ld9040: use devm_{backlight,lcd}_device_register()Jingoo Han1-15/+6
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ams369fg06: use devm_{backlight,lcd}_device_register()Jingoo Han1-15/+7
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: tdo24m: use devm_lcd_device_register()Jingoo Han1-9/+3
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: platform_lcd: use devm_lcd_device_register()Jingoo Han1-17/+3
Use devm_lcd_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ltv350qv: use devm_lcd_device_register()Jingoo Han1-8/+3
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lms501kf03: use devm_lcd_device_register()Jingoo Han1-4/+2
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lms283gf05: use devm_lcd_device_register()Jingoo Han1-11/+2
Use devm_lcd_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ili9320: use devm_lcd_device_register()Jingoo Han1-10/+3
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ili922x: use devm_lcd_device_register()Jingoo Han1-5/+2
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: hx8357: use devm_lcd_device_register()Jingoo Han1-15/+3
Use devm_lcd_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: wm831x_bl: use devm_backlight_device_register()Jingoo Han1-11/+2
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: tps65217_bl: use devm_backlight_device_register()Jingoo Han1-11/+1
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: pcf50633: use devm_backlight_device_register()Jingoo Han1-11/+2
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: pandora_bl: use devm_backlight_device_register()Jingoo Han1-10/+2
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: max8925_bl: use devm_backlight_device_register()Jingoo Han1-14/+3
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lv5207lp: use devm_backlight_device_register()Jingoo Han1-4/+3
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lp855x: use devm_backlight_device_register()Jingoo Han1-16/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Also, unnecessary lp855x_backlight_unregister() is removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lm3533_bl: use devm_backlight_device_register()Jingoo Han1-6/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: kb3886_bl: use devm_backlight_device_register()Jingoo Han1-14/+4
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: gpio_backlight: use devm_backlight_device_register()Jingoo Han1-11/+3
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: generic_bl: use devm_backlight_device_register()Jingoo Han1-4/+2
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ep93xx: use devm_backlight_device_register()Jingoo Han1-11/+2
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: da9052_bl: use devm_backlight_device_register()Jingoo Han1-3/+3
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: da903x_bl: use devm_backlight_device_register()Jingoo Han1-11/+3
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: bd6107: use devm_backlight_device_register()Jingoo Han1-2/+2
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: use devm_backlight_device_register()Jingoo Han1-6/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: as3711_bl: use devm_backlight_device_register()Jingoo Han1-21/+5
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: adp8870: use devm_backlight_device_register()Jingoo Han1-7/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: adp8860: use devm_backlight_device_register()Jingoo Han1-7/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: adp5520: use devm_backlight_device_register()Jingoo Han1-5/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: aat2870: use devm_backlight_device_register()Jingoo Han1-7/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: 88pm860x_bl: use devm_backlight_device_register()Jingoo Han1-14/+2
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: use dev_get_platdata()Jingoo Han32-46/+44
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lp8788: staticize 'default_bl_config'Jingoo Han1-1/+1
Fix the following sparse warning: drivers/video/backlight/lp8788_bl.c:55:25: warning: symbol 'default_bl_config' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lm3639: don't mix different enum typesJingoo Han1-4/+7
Don't mix different enum types to fix the sparse warnings. drivers/video/backlight/lm3639_bl.c:80:51: warning: mixing different enum types drivers/video/backlight/lm3639_bl.c:80:51: int enum lm3639_fleds versus drivers/video/backlight/lm3639_bl.c:80:51: int enum lm3639_bleds drivers/video/backlight/lm3639_bl.c:82:51: warning: mixing different enum types drivers/video/backlight/lm3639_bl.c:82:51: int enum lm3639_fleds versus drivers/video/backlight/lm3639_bl.c:82:51: int enum lm3639_bleds Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 22:02:32 +0300