summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)AuthorFilesLines
2018-10-08mach64: detect the dot clock divider correctly on sparcMikulas Patocka3-9/+11
On Sun Ultra 5, it happens that the dot clock is not set up properly for some videomodes. For example, if we set the videomode "r1024x768x60" in the firmware, Linux would incorrectly set a videomode with refresh rate 180Hz when booting (suprisingly, my LCD monitor can display it, although display quality is very low). The reason is this: Older mach64 cards set the divider in the register VCLK_POST_DIV. The register has four 2-bit fields (the field that is actually used is specified in the lowest two bits of the register CLOCK_CNTL). The 2 bits select divider "1, 2, 4, 8". On newer mach64 cards, there's another bit added - the top four bits of PLL_EXT_CNTL extend the divider selection, so we have possible dividers "1, 2, 4, 8, 3, 5, 6, 12". The Linux driver clears the top four bits of PLL_EXT_CNTL and never sets them, so it can work regardless if the card supports them. However, the sparc64 firmware may set these extended dividers during boot - and the mach64 driver detects incorrect dot clock in this case. This patch makes the driver read the additional divider bit from PLL_EXT_CNTL and calculate the initial refresh rate properly. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Ville Syrjälä <syrjala@sci.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26video/fbdev/stifb: Fix spelling mistake in fall-through annotationGustavo A. R. Silva1-1/+1
Replace "fall though" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Addresses-Coverity-ID: 402013 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-09-26efifb: BGRT: Add nobgrt optionHans de Goede1-0/+6
In some setups restoring the BGRT logo is undesirable, allow passing video=efifb:nobgrt on the kernel commandline to disable it. Reported-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-09-26fbdev/omapfb: fix omapfb_memory_read infoleakTomi Valkeinen1-1/+4
OMAPFB_MEMORY_READ ioctl reads pixels from the LCD's memory and copies them to a userspace buffer. The code has two issues: - The user provided width and height could be large enough to overflow the calculations - The copy_to_user() can copy uninitialized memory to the userspace, which might contain sensitive kernel information. Fix these by limiting the width & height parameters, and only copying the amount of data that we actually received from the LCD. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by: Jann Horn <jannh@google.com> Cc: stable@vger.kernel.org Cc: security@kernel.org Cc: Will Deacon <will.deacon@arm.com> Cc: Jann Horn <jannh@google.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-09-26pxa168fb: prepare the clockLubomir Rintel1-3/+3
Add missing prepare/unprepare operations for fbi->clk, this fixes following kernel warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:874 clk_core_enable+0x2c/0x1b0 Enabling unprepared disp0_clk Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.18.0-rc8-00032-g02b43ddd4f21-dirty #25 Hardware name: Marvell MMP2 (Device Tree Support) [<c010f7cc>] (unwind_backtrace) from [<c010cc6c>] (show_stack+0x10/0x14) [<c010cc6c>] (show_stack) from [<c011dab4>] (__warn+0xd8/0xf0) [<c011dab4>] (__warn) from [<c011db10>] (warn_slowpath_fmt+0x44/0x6c) [<c011db10>] (warn_slowpath_fmt) from [<c043898c>] (clk_core_enable+0x2c/0x1b0) [<c043898c>] (clk_core_enable) from [<c0439ec8>] (clk_core_enable_lock+0x18/0x2c) [<c0439ec8>] (clk_core_enable_lock) from [<c0436698>] (pxa168fb_probe+0x464/0x6ac) [<c0436698>] (pxa168fb_probe) from [<c04779a0>] (platform_drv_probe+0x48/0x94) [<c04779a0>] (platform_drv_probe) from [<c0475bec>] (driver_probe_device+0x328/0x470) [<c0475bec>] (driver_probe_device) from [<c0475de4>] (__driver_attach+0xb0/0x124) [<c0475de4>] (__driver_attach) from [<c0473c38>] (bus_for_each_dev+0x64/0xa0) [<c0473c38>] (bus_for_each_dev) from [<c0474ee0>] (bus_add_driver+0x1b8/0x230) [<c0474ee0>] (bus_add_driver) from [<c0476a20>] (driver_register+0xac/0xf0) [<c0476a20>] (driver_register) from [<c0102dd4>] (do_one_initcall+0xb8/0x1f0) [<c0102dd4>] (do_one_initcall) from [<c0b010a0>] (kernel_init_freeable+0x294/0x2e0) [<c0b010a0>] (kernel_init_freeable) from [<c07e9eb8>] (kernel_init+0x8/0x10c) [<c07e9eb8>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xd008bfb0 to 0xd008bff8) bfa0: 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace c0af40f9e2ed7cb4 ]--- Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> [b.zolnierkie: enhance patch description a bit] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-08-24Merge tag 'fbdev-v4.19' of https://github.com/bzolnier/linuxLinus Torvalds27-266/+578
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "Mostly small fixes and cleanups for fb drivers (the biggest updates are for udlfb and pxafb drivers). This also adds deferred console takeover support to the console code and efifb driver. Summary: - add support for deferred console takeover, when enabled defers fbcon taking over the console from the dummy console until the first text is displayed on the console - together with the "quiet" kernel commandline option this allows fbcon to still be used together with a smooth graphical bootup (Hans de Goede) - improve console locking debugging code (Thomas Zimmermann) - copy the ACPI BGRT boot graphics to the framebuffer when deferred console takeover support is used in efifb driver (Hans de Goede) - update udlfb driver - fix lost console when the user unplugs a USB adapter, fix the screen corruption issue, fix locking and add some performance optimizations (Mikulas Patocka) - update pxafb driver - fix using uninitialized memory, switch to devm_* API, handle initialization errors and add support for lcd-supply regulator (Daniel Mack) - add support for boards booted with a DeviceTree in pxa3xx_gcu driver (Daniel Mack) - rename omap2 module to omap2fb.ko to avoid conflicts with omap1 driver (Arnd Bergmann) - enable ACPI-based enumeration for goldfishfb driver (Yu Ning) - fix goldfishfb driver to make user space Android code use 60 fps (Christoffer Dall) - print big fat warning when nomodeset kernel parameter is used in vgacon driver (Lyude Paul) - remove VLA usage from fsl-diu-fb driver (Kees Cook) - misc fixes (Julia Lawall, Geert Uytterhoeven, Fredrik Noring, Yisheng Xie, Dan Carpenter, Daniel Vetter, Anton Vasilyev, Randy Dunlap, Gustavo A. R. Silva, Colin Ian King, Fengguang Wu) - misc cleanups (Roman Kiryanov, Yisheng Xie, Colin Ian King)" * tag 'fbdev-v4.19' of https://github.com/bzolnier/linux: (54 commits) Documentation/fb: corrections for fbcon.txt fbcon: Do not takeover the console from atomic context dummycon: Stop exporting dummycon_[un]register_output_notifier fbcon: Only defer console takeover if the current console driver is the dummycon fbcon: Only allow FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER if fbdev is builtin fbdev: omap2: omapfb: fix ifnullfree.cocci warnings fbdev: omap2: omapfb: fix bugon.cocci warnings fbdev: omap2: omapfb: fix boolreturn.cocci warnings fb: amifb: fix build warnings when not builtin fbdev/core: Disable console-lock warnings when fb.lockless_register_fb is set console: Replace #if 0 with atomic var 'ignore_console_lock_warning' udlfb: use spin_lock_irq instead of spin_lock_irqsave udlfb: avoid prefetch udlfb: optimization - test the backing buffer udlfb: allow reallocating the framebuffer udlfb: set line_length in dlfb_ops_set_par udlfb: handle allocation failure udlfb: set optimal write delay udlfb: make a local copy of fb_ops udlfb: don't switch if we are switching to the same videomode ...
2018-08-21Merge tag 'backlight-next-4.19' of ↵Linus Torvalds2-13/+220
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Core Framework: - Remove unused/obsolete code/comments New Functionality: - Allow less granular brightness specification for high-res PWMs; pwm_bl - Align brightness {inc,dec}rements with that perceived by the human-eye; pwm_bl Fix-ups: - Prepare for the introduction of -Wimplicit-fall-through; adp8860_bl Bug Fixes: - Fix uninitialised variable; pwm_bl" * tag 'backlight-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Fix uninitialized variable backlight: adp8860: Mark expected switch fall-through backlight: Remove obsolete comment for ->state dt-bindings: pwm-backlight: Move brightness-levels to optional backlight: pwm_bl: Compute brightness of LED linearly to human eye dt-bindings: pwm-backlight: Add a num-interpolation-steps property backlight: pwm_bl: Linear interpolation between brightness-levels
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds2-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-08-16Merge tag 'media/v4.19-1' of ↵Linus Torvalds3-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new Socionext MN88443x ISDB-S/T demodulator driver: mn88443x - new sensor drivers: ak7375, ov2680 and rj54n1cb0c - an old soc-camera sensor driver converted to the V4L2 framework: mt9v111 - a new Voice-Coil Motor (VCM) driver: dw9807-vcm - some cleanups at cx25821, removing legacy unused code - some improvements at ddbridge driver - new platform driver: vicodec - some DVB API cleanups, removing ioctls and compat code for old out-of-tree drivers that were never merged upstream - improvements at DVB core to support frontents that support both Satellite and non-satellite delivery systems - got rid of the unused VIDIOC_RESERVED V4L2 ioctl - some cleanups/improvements at gl861 ISDB driver - several improvements on ov772x, ov7670 and ov5640, imx274, ov5645, and smiapp sensor drivers - fixes at em28xx to support dual TS devices - some cleanups at V4L2/VB2 locking logic - some API improvements at media controller - some cec core and drivers improvements - some uvcvideo improvements - some improvements at platform drivers: stm32-dcmi, rcar-vin, coda, reneseas-ceu, imx, vsp1, venus, camss - lots of other cleanups and fixes * tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (406 commits) Revert "media: vivid: shut up warnings due to a non-trivial logic" siano: get rid of an unused return code for debugfs register media: isp: fix a warning about a wrong struct initializer media: radio-wl1273: fix return code for the polling routine media: s3c-camif: fix return code for the polling routine media: saa7164: fix return codes for the polling routine media: exynos-gsc: fix return code if mutex was interrupted media: mt9v111: Fix build error with no VIDEO_V4L2_SUBDEV_API media: xc4000: get rid of uneeded casts media: drxj: get rid of uneeded casts media: tuner-xc2028: don't use casts for printing sizes media: cleanup fall-through comments media: vivid: shut up warnings due to a non-trivial logic media: rtl28xxu: be sure that it won't go past the array size media: mt9v111: avoid going past the buffer media: vsp1_dl: add a description for cmdpool field media: sta2x11: add a missing parameter description media: v4l2-mem2mem: add descriptions to MC fields media: i2c: fix warning in Aptina MT9V111 media: imx: shut up a false positive warning ...
2018-08-16Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds3-8/+155
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.19. Rob has some new hardware support for new qualcomm hw that I'll send along separately. This has the display part of it, the remaining pull is for the acceleration engine. This also contains a wound-wait/wait-die mutex rework, Peter has acked it for merging via my tree. Otherwise mostly the usual level of activity. Summary: core: - Wound-wait/wait-die mutex rework - Add writeback connector type - Add "content type" property for HDMI - Move GEM bo to drm_framebuffer - Initial gpu scheduler documentation - GPU scheduler fixes for dying processes - Console deferred fbcon takeover support - Displayport support for CEC tunneling over AUX panel: - otm8009a panel driver fixes - Innolux TV123WAM and G070Y2-L01 panel driver - Ilitek ILI9881c panel driver - Rocktech RK070ER9427 LCD - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6 - DLC DLC0700YZG-1 - BOE HV070WSA-100 - newhaven, nhd-4.3-480272ef-atxl LCD - DataImage SCF0700C48GGU18 - Sharp LQ035Q7DB03 - p079zca: Refactor to support multiple panels tinydrm: - ILI9341 display panel New driver: - vkms - virtual kms driver to testing. i915: - Icelake: Display enablement DSI support IRQ support Powerwell support - GPU reset fixes and improvements - Full ppgtt support refactoring - PSR fixes and improvements - Execlist improvments - GuC related fixes amdgpu: - Initial amdgpu documentation - JPEG engine support on VCN - CIK uses powerplay by default - Move to using core PCIE functionality for gens/lanes - DC/Powerplay interface rework - Stutter mode support for RV - Vega12 Powerplay updates - GFXOFF fixes - GPUVM fault debugging - Vega12 GFXOFF - DC improvements - DC i2c/aux changes - UVD 7.2 fixes - Powerplay fixes for Polaris12, CZ/ST - command submission bo_list fixes amdkfd: - Raven support - Power management fixes udl: - Cleanups and fixes nouveau: - misc fixes and cleanups. msm: - DPU1 support display controller in sdm845 - GPU coredump support. vmwgfx: - Atomic modesetting validation fixes - Support for multisample surfaces armada: - Atomic modesetting support completed. exynos: - IPPv2 fixes - Move g2d to component framework - Suspend/resume support cleanups - Driver cleanups imx: - CSI configuration improvements - Driver cleanups - Use atomic suspend/resume helpers - ipu-v3 V4L2 XRGB32/XBGR32 support pl111: - Add Nomadik LCDC variant v3d: - GPU scheduler jobs management sun4i: - R40 display engine support - TCON TOP driver mediatek: - MT2712 SoC support rockchip: - vop fixes omapdrm: - Workaround for DRA7 errata i932 - Fix mm_list locking mali-dp: - Writeback implementation PM improvements - Internal error reporting debugfs tilcdc: - Single fix for deferred probing hdlcd: - Teardown fixes tda998x: - Converted to a bridge driver. etnaviv: - Misc fixes" * tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits) drm/amdgpu/sriov: give 8s for recover vram under RUNTIME drm/scheduler: fix param documentation drm/i2c: tda998x: correct PLL divider calculation drm/i2c: tda998x: get rid of private fill_modes function drm/i2c: tda998x: move mode_valid() to bridge drm/i2c: tda998x: register bridge outside of component helper drm/i2c: tda998x: cleanup from previous changes drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create() drm/i2c: tda998x: convert to bridge driver drm/scheduler: fix timeout worker setup for out of order job completions drm/amd/display: display connected to dp-1 does not light up drm/amd/display: update clk for various HDMI color depths drm/amd/display: program display clock on cache match drm/amd/display: Add NULL check for enabling dp ss drm/amd/display: add vbios table check for enabling dp ss drm/amd/display: Don't share clk source between DP and HDMI drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo drm/amd/display: Use calculated disp_clk_khz value for dce110 drm/amd/display: Implement custom degamma lut on dcn drm/amd/display: Destroy aux_engines only once ...
2018-08-10fbcon: Do not takeover the console from atomic contextHans de Goede1-4/+15
Taking over the console involves allocating mem with GFP_KERNEL, talking to drm drivers, etc. So this should not be done from an atomic context. But the console-output trigger deferred console takeover may happen from an atomic context, which leads to "BUG: sleeping function called from invalid context" errors. This commit fixes these errors by doing the deferred takeover from a workqueue. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [b.zolnierkie: remove unused variable] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-08-10dummycon: Stop exporting dummycon_[un]register_output_notifierHans de Goede1-2/+0
Now that we only allow FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER when fbdev+fbcon are builtin exporting these is no longer necessary. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-08-10fbcon: Only defer console takeover if the current console driver is the dummyconHans de Goede1-14/+10
We rely on dummycon's output notifier mechanism to defer the takeover. If say vgacon is the current console driver then dummycon will never get used so its output notifier will also never get called and fbcon never takes over. This commit fixes this by only deferring the console takeover if the current console driver is the dummycon driver. This commit also moves the entirety of fbcon_start under the console_lock, since the conswitchp which fbcon_start now checks is protected by it. This commit also inlines fbcon_register_output_notifier, since we now need a #ifdef CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER in fbcon_start anyways because of the write access to the deferred_takeover variable, this has the added advantage that it puts the dummycon_register_output_notifier() call directly after the "conswitchp != &dummy_con" comparison making it clear why that check is there. Note the arch setup code will set conswitchp to either dummy_con or vga_con, in the cases where it gets set to vga_con even though their is no vga_con present we rely on vga_con_startup() to set conswitchp to dummy_con. vga_con_startup() is guaranteed to happen before fb_console_init() as it gets called as a console_initcall where as fb_console_init() gets called as a subsys_initcall. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-08-10fbcon: Only allow FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER if fbdev is builtinHans de Goede1-1/+1
Having FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER with fbdev+fbcon being build as a module does not make much sense. Having FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER only when fbdev+fbcon are builtin was always the intention, hence the =y checks but they were checking the wrong option, fbcon is build as part of fb.ko, so we must check for FB=y. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-08-03media: omap2: omapfb: fix bugon.cocci warningskbuild test robot1-2/+1
drivers/video/fbdev/omap2/omapfb/dss/dss_features.c:895:2-5: WARNING: Use BUG_ON instead of if condition followed by BUG. Please make sure the condition has no side effects (see conditional BUG_ON definition in include/asm-generic/bug.h) Use BUG_ON instead of a if condition followed by BUG. Semantic patch information: This makes an effort to find cases where BUG() follows an if condition on an expression and replaces the if condition and BUG() with a BUG_ON having the conditional expression of the if statement as argument. Generated by: scripts/coccinelle/misc/bugon.cocci Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-03media: omap2: omapfb: fix boolreturn.cocci warningskbuild test robot1-1/+1
drivers/video/fbdev/omap2/omapfb/omapfb-main.c:290:9-10: WARNING: return of 0/1 in function 'cmp_var_to_colormode' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-03media: omap2: omapfb: fix ifnullfree.cocci warningskbuild test robot1-2/+1
drivers/video/fbdev/omap2/omapfb/dss/core.c:141:2-26: WARNING: NULL check before some freeing functions is not needed. NULL check before some freeing functions is not needed. Based on checkpatch warning "kfree(NULL) is safe this check is probably not required" and kfreeaddr.cocci by Julia Lawall. Generated by: scripts/coccinelle/free/ifnullfree.cocci Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-31fbdev: omap2: omapfb: fix ifnullfree.cocci warningskbuild test robot1-2/+1
drivers/video/fbdev/omap2/omapfb/dss/core.c:141:2-26: WARNING: NULL check before some freeing functions is not needed. NULL check before some freeing functions is not needed. Based on checkpatch warning "kfree(NULL) is safe this check is probably not required" and kfreeaddr.cocci by Julia Lawall. Generated by: scripts/coccinelle/free/ifnullfree.cocci Fixes: 7378f1149884 ("media: omap2: omapfb: allow building it with COMPILE_TEST") Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-31fbdev: omap2: omapfb: fix bugon.cocci warningskbuild test robot1-2/+1
drivers/video/fbdev/omap2/omapfb/dss/dss_features.c:895:2-5: WARNING: Use BUG_ON instead of if condition followed by BUG. Please make sure the condition has no side effects (see conditional BUG_ON definition in include/asm-generic/bug.h) Use BUG_ON instead of a if condition followed by BUG. Semantic patch information: This makes an effort to find cases where BUG() follows an if condition on an expression and replaces the if condition and BUG() with a BUG_ON having the conditional expression of the if statement as argument. Generated by: scripts/coccinelle/misc/bugon.cocci Fixes: 7378f1149884 ("media: omap2: omapfb: allow building it with COMPILE_TEST") Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-31fbdev: omap2: omapfb: fix boolreturn.cocci warningskbuild test robot1-1/+1
drivers/video/fbdev/omap2/omapfb/omapfb-main.c:290:9-10: WARNING: return of 0/1 in function 'cmp_var_to_colormode' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Fixes: 7378f1149884 ("media: omap2: omapfb: allow building it with COMPILE_TEST") Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-31fb: amifb: fix build warnings when not builtinRandy Dunlap1-2/+2
Fix build warning when built as a loadable module. amifb_setup() and amifb_setup_mcap() are only needed when the driver is builtin. This matches how the functions are called (using #ifndef MODULE). ../drivers/video/fbdev/amifb.c:2344:19: warning: 'amifb_setup' defined but not used [-Wunused-function] static int __init amifb_setup(char *options) ../drivers/video/fbdev/amifb.c:2307:20: warning: 'amifb_setup_mcap' defined but not used [-Wunused-function] static void __init amifb_setup_mcap(char *spec) Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-31fbdev/core: Disable console-lock warnings when fb.lockless_register_fb is setThomas Zimmermann1-4/+9
If the console is unlocked during registration, the console subsystem generates significant amounts of warnings, which obfuscate actual debugging messages. Setting ignore_console_lock_warning while debugging console registration avoid the noise. v3: - manipulate ignore_console_lock_warning with atomic_{inc,dec} v2: - restore ignore_console_lock_warning if lock_fb_info() fails Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-25udlfb: use spin_lock_irq instead of spin_lock_irqsaveMikulas Patocka1-6/+4
spin_lock_irqsave and spin_unlock_irqrestore is inteded to be called from a context where it is unknown if interrupts are enabled or disabled (such as interrupt handlers). From a process context, we should call spin_lock_irq and spin_unlock_irq, that avoids the costly pushf and popf instructions. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-25udlfb: avoid prefetchMikulas Patocka1-8/+0
Modern processors can detect linear memory accesses and prefetch data automatically, so there's no need to use prefetch. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-25udlfb: optimization - test the backing bufferMikulas Patocka1-10/+33
Currently, the udlfb driver only tests for identical bytes at the beginning or at the end of a page and renders anything between the first and last mismatching pixel. But pages are not the same as lines, so this is quite suboptimal - if there is something modified at the beginning of a page and at the end of a page, the whole page is rendered, even if most of the page is not modified. This patch makes it test for identical pixels at the beginning and end of each rendering command. This patch improves identical byte detection by 41% when playing video in a window. This patch also fixes a possible screen corruption if the user is writing to the framebuffer while dlfb_render_hline is in progress - the pixel data that is copied to the backbuffer with memcpy may be different from the pixel data that is actually rendered to the hardware (because the content of the framebuffer may change between memcpy and the rendering command). We must make sure that we copy exactly the same pixel as the pixel that is being rendered. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> [b.zolnierkie: fix code indent] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-25udlfb: allow reallocating the framebufferMikulas Patocka1-25/+49
This patch changes udlfb so that it may reallocate the framebuffer when setting higher-resolution mode. If we boot the system without monitor attached, udlfb creates a framebuffer with the size 800x600. This patch makes it possible to select higher videomode with the fbset command when a monitor is attached. Note that there is no reliable way to prevent the system from touching the old framebuffer, so we must not free it. We add it to the list dlfb->deferred_free and free it when the driver is unloaded. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> [b.zolnierkie: sparse fixes] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-25udlfb: set line_length in dlfb_ops_set_parMikulas Patocka1-0/+1
Set the variable "line_length" in the function dlfb_ops_set_par. Without this, we get garbage if we select different videomode with fbset. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-25udlfb: handle allocation failureMikulas Patocka1-9/+17
Allocations larger than PAGE_ALLOC_COSTLY_ORDER are unreliable and they may fail anytime. This patch fixes the udlfb driver so that when a large alloactions fails, it tries to do multiple smaller allocations. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-25udlfb: make a local copy of fb_opsMikulas Patocka1-1/+2
The defio subsystem overwrites the method fb_osp->mmap. That method is stored in module's static data - and that means that if we have multiple diplaylink adapters, they will over write each other's method. In order to avoid interference between multiple adapters, we copy the fb_ops structure to a device-local memory. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-25udlfb: don't switch if we are switching to the same videomodeMikulas Patocka1-2/+16
The udlfb driver reprograms the hardware everytime the user switches the console, that makes quite unusable when working on the console. This patch makes the driver remember the videomode we are in and avoid reprogramming the hardware if we switch to the same videomode. We mask the "activate" field and the "FB_VMODE_SMOOTH_XPAN" flag when comparing the videomode, because they cause spurious switches when switching to and from the Xserver. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-25udlfb: fix display corruption of the last lineMikulas Patocka1-10/+20
The displaylink hardware has such a peculiarity that it doesn't render a command until next command is received. This produces occasional corruption, such as when setting 22x11 font on the console, only the first line of the cursor will be blinking if the cursor is located at some specific columns. When we end up with a repeating pixel, the driver has a bug that it leaves one uninitialized byte after the command (and this byte is enough to flush the command and render it - thus it fixes the screen corruption), however whe we end up with a non-repeating pixel, there is no byte appended and this results in temporary screen corruption. This patch fixes the screen corruption by always appending a byte 0xAF at the end of URB. It also removes the uninitialized byte. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-25udlfb: fix semaphore value leakMikulas Patocka1-25/+2
I observed that the performance of the udl fb driver degrades over time. On a freshly booted machine, it takes 6 seconds to do "ls -la /usr/bin"; after some time of use, the same operation takes 14 seconds. The reason is that the value of "limit_sem" decays over time. The udl driver uses a semaphore "limit_set" to specify how many free urbs are there on dlfb->urbs.list. If the count is zero, the "down" operation will sleep until some urbs are added to the freelist. In order to avoid some hypothetical deadlock, the driver will not call "up" immediately, but it will offload it to a workqueue. The problem is that if we call "schedule_delayed_work" on the same work item multiple times, the work item may only be executed once. This is happening: * some urb completes * dlfb_urb_completion adds it to the free list * dlfb_urb_completion calls schedule_delayed_work to schedule the function dlfb_release_urb_work to increase the semaphore count * as the urb is on the free list, some other task grabs it and submits it * the submitted urb completes, dlfb_urb_completion is called again * dlfb_urb_completion calls schedule_delayed_work, but the work is already scheduled, so it does nothing * finally, dlfb_release_urb_work is called, it increases the semaphore count by 1, although it should increase it by 2 So, the semaphore count is decreasing over time, and this causes gradual performance degradation. Note that in the current kernel, the "up" function may be called from interrupt and it may race with the "down" function called by another thread, so we don't have to offload the call of "up" to a workqueue at all. This patch removes the workqueue code. The patch also changes "down_interruptible" to "down" in dlfb_free_urb_list, so that we will clean up the driver properly even if a signal arrives. With this patch, the performance of udlfb no longer degrades. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org [b.zolnierkie: fix immediatelly -> immediately typo] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-25fb: fix lost console when the user unplugs a USB adapterMikulas Patocka1-6/+32
I have a USB display adapter using the udlfb driver and I use it on an ARM board that doesn't have any graphics card. When I plug the adapter in, the console is properly displayed, however when I unplug and re-plug the adapter, the console is not displayed and I can't access it until I reboot the board. The reason is this: When the adapter is unplugged, dlfb_usb_disconnect calls unlink_framebuffer, then it waits until the reference count drops to zero and then it deallocates the framebuffer. However, the console that is attached to the framebuffer device keeps the reference count non-zero, so the framebuffer device is never destroyed. When the USB adapter is plugged again, it creates a new device /dev/fb1 and the console is not attached to it. This patch fixes the bug by unbinding the console from unlink_framebuffer. The code to unbind the console is moved from do_unregister_framebuffer to a function unbind_console. When the console is unbound, the reference count drops to zero and the udlfb driver frees the framebuffer. When the adapter is plugged back, a new framebuffer is created and the console is attached to it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Bernie Thompson <bernie@plugable.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: stable@vger.kernel.org [b.zolnierkie: preserve old behavior for do_unregister_framebuffer()] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-25backlight: pwm_bl: Fix uninitialized variableDaniel Thompson1-1/+1
Currently, if the DT does not define num-interpolated-steps then num_steps is undefined and the interpolation code will deploy randomly. Fix with a simple initialize to zero. Fixes: 573fe6d1c25c ("backlight: pwm_bl: Linear interpolation between brightness-levels") Reported-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-24efifb: BGRT: Do not copy the boot graphics for non native resolutionsHans de Goede1-0/+43
On x86 some firmwares use a low non native resolution for the display when they have shown some text messages. While keeping the bgrt filled with info for the native resolution. If the bgrt image intended for the native resolution still fits, it will be displayed very close to the right edge of the display looking quite bad. This commits adds a (heuristics based) checks for this and makes efifb not show the boot graphics when this is the case. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24fbdev: fix omap2/omapfb/dss/ indentation warningRandy Dunlap1-1/+1
Fix indentation warning (from gcc 8.1.0) in omap2/omapfb: ../drivers/video/fbdev/omap2/omapfb/dss/dispc.c: In function 'pixinc': ../drivers/video/fbdev/omap2/omapfb/dss/dispc.c:1859:2: warning: this 'else' clause does not guard... [-Wmisleading-indentation] else ^~~~ ../drivers/video/fbdev/omap2/omapfb/dss/dispc.c:1861:3: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'else' return 0; ^~~~~~ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24omapfb: encoder-tpd12s015: remove redundant pointer 'in'Colin Ian King1-4/+1
Pointer 'in' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'in' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24video: fbdev: tridentfb: remove deadcode on unreachable case statementColin Ian King1-3/+0
The value of tmp being used in the switch statement has the range of just 0..3 hence the case 4 statement can never be reached and is deadcode and can be removed. Detected by CoverityScan, CID#744384 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24fbdev: omapfb: off by one in omapfb_register_client()Dan Carpenter1-1/+1
The omapfb_register_client[] array has OMAPFB_PLANE_NUM elements so the > should be >= or we are one element beyond the end of the array. Fixes: 8b08cf2b64f5 ("OMAP: add TI OMAP framebuffer driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24video: fbdev: mark expected switch fall-throughsGustavo A. R. Silva4-0/+5
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24omapfb: Mark expected switch fall-throughsGustavo A. R. Silva2-0/+3
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24fbdev: fbmem: mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24fbdev/via: fix defined but not used warningRandy Dunlap1-1/+2
Fix a build warning in viafbdev.c when CONFIG_PROC_FS is not enabled by marking the unused function as __maybe_unused. ../drivers/video/fbdev/via/viafbdev.c:1471:12: warning: 'viafb_sup_odev_proc_show' defined but not used [-Wunused-function] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24omapfb: rename omap2 module to omap2fb.koArnd Bergmann1-2/+2
In a kernel configuration with both CONFIG_FB_OMAP=m and CONFIG_FB_OMAP2=m, Kbuild fails to point out that we have two modules with the same name (omapfb.ko), but instead fails with a cryptic error message like: ERROR: "omapfb_register_panel" [drivers/video/fbdev/omap/lcd_osk.ko] undefined! This can now happen when building a randconfig kernel with CONFIG_ARCH_OMAP1, as the omap1 fbdev driver depends on that, whiel the omap2 fbdev driver can now be built anywhere with CONFIG_COMPILE_TEST. The solution is to rename one of the two modules, so for consistency with the directory naming I decided to rename the omap2 version to omap2fb.ko. Fixes: 7378f1149884 ("media: omap2: omapfb: allow building it with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24video: goldfishfb: fix memory leak on driver removeAnton Vasilyev1-0/+1
goldfish_fb_probe() allocates memory for fb, but goldfish_fb_remove() does not have deallocation of fb, which leads to memory leak on probe/remove. The patch adds deallocation into goldfish_fb_remove(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Cc: Aleksandar Markovic <aleksandar.markovic@mips.com> Cc: Miodrag Dinic <miodrag.dinic@mips.com> Cc: Goran Ferenc <goran.ferenc@mips.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24fbdev: fix modedb docs in fb_find_modeDaniel Vetter1-30/+32
Fix up the indenting that confused sphinx. To make sure we don't have to make the examples unreadable with escaping just put them in as block quotes, that seems the simplest solution. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [b.zolnierkie: ported over fbdev changes] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24video: fbdev: metronomefb: fix some off by one bugsDan Carpenter1-5/+5
The "mem" buffer has "size" bytes. The ">" should be ">=" to prevent reading one character beyond the end of the array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24video/console/vgacon: Print big fat warning with nomodesetLyude Paul1-0/+5
It's been a pretty good while since kernel modesetting was introduced. It has almost entirely replaced previous solutions which required userspace modesetting, and I can't even recall any drivers off the top of my head for modern day hardware that don't only support one or the other. Even nvidia's ugly blob does not require the use of nomodeset, and only requires that nouveau be blacklisted. Effectively, the only thing nomodeset does in the year 2018 is disable your graphics drivers. Since VESA is a thing, this will give many users the false impression that they've actually fixed an issue they were having with their machine simply because the laptop will boot up to a degraded GUI. This of course, is never actually the case. Things get even worse when you consider that there's still an enormous amount of tutorials users find on the internet that still suggest adding nomodeset, along with various users who have been around long enough to still suggest it. There really isn't any legitimate reason I can see for this to be an option that's used by anyone else other then developers, or properly informed users. So, let's end the confusion and start printing warnings whenever it's enabled. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: "Jan H. Schönherr" <jschoenh@amazon.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24fbcon: introduce for_each_registered_fb() helperYisheng Xie2-23/+12
Following pattern is often used: for (i = 0; i < FB_MAX; i++) { if (registered_fb[i]) { ... } } Therefore, as Andy's suggestion, for_each_registered_fb() helper can be introduced to make the code easier to read and write by reducing indentation level. It also saves few lines of code in each occurrence. This patch convert all part here at the same time. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Yisheng Xie <ysxie@foxmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: David Lechner <david@lechnology.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24video: fbdev: fsl-diu-fb: Remove VLA usageKees Cook1-10/+13
In the quest to remove all stack VLA usage from the kernel[1], this moves the buffer off the stack (since it could be as much as 1024 bytes), and uses a new area in the cursor data structure. Additionally adds missed documentation and removes redundant assignments. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-12 00:48:05 +0300