summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)AuthorFilesLines
2013-09-20video: mmp: rb swap setting update for mmp displayGuoqing Li2-8/+16
We could set rb swap in two modules: DMA controler input part and dsi interface output part. DMA input part is based on pix_fmt to set rbswap, dsi output interface part will set rbswap based on platform dsi_rbswap configuration. This patch include below change and enhancement: 1) The input format which support rbswap is based on RGB format, eg. RGB565 indicates the source data in memory is that Red is [15~11], Green is [10~5], Blue is [4:0], Red is MSB, Blue is LSB, but for the display dma input default setting(rbswap = 0), it only support Blue is [15~11], Green is [10~5], Red is [4:0], Red is LSB, Blue is MSB, so for this format(RGB565), display controller need to set rbswap = 1 and it can support the MSB/LSB correctly. BGR/YUV format will not set it in mmp display driver. 2) The dsi output part of rbswap is depend on dsi_rbswap which is defined in specific platfrom. For output dsi interface, it has this feature to do rbswap again if it needs specifc byte sequence of RGB byte for DSI panel. eg. If display content is set RGB565 in memory and DMA input part set rbswap in driver to support Red as MSB , Blue LSB, but dsi panel only support Red as LSB, Blue as MSB, then it can use this feature. If there is no this requirement of panel, this dsi output part is not needed. Signed-off-by: Guoqing Li <ligq@marvell.com> Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Signed-off-by: Zhou Zhu <zzhu3@marvell.com> Reviewed-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: w100fb: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: tmiofb: use dev_get_platdata()Jingoo Han1-5/+5
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: simplefb: use dev_get_platdata()Jingoo Han1-2/+2
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: s3c-fb: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: s1d13xxxfb: use dev_get_platdata()Jingoo Han1-6/+6
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: mbxfb: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: imxfb: use dev_get_platdata()Jingoo Han1-3/+3
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: ep93xx-fb: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: da8xx-fb: use dev_get_platdata()Jingoo Han1-2/+2
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: amba-clcd: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: sh_mobile_hdmi: use dev_get_platdata()Jingoo Han1-3/+3
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: sa1100fb: use dev_get_platdata()Jingoo Han1-2/+2
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: s3c2410: use dev_get_platdata()Jingoo Han1-3/+3
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: pxafb: use dev_get_platdata()Jingoo Han1-8/+8
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: pxa168fb: use dev_get_platdata()Jingoo Han1-3/+3
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: omapfb: use dev_get_platdata()Jingoo Han2-3/+3
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: nuc900fb: use dev_get_platdata()Jingoo Han1-3/+3
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: mx3fb: use dev_get_platdata()Jingoo Han1-2/+2
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: atmel_lcdfb: use dev_get_platdata()Jingoo Han1-2/+2
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Also, unnecessary casting from return value that is a void pointer is removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20radeon: Conditionally compile PM codeThierry Reding1-1/+6
The power management code is only used on X86 and PowerMac. To prevent the compiler from warning about unused code, only build when PM and one of X86 or PowerMac is selected. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20video: grvga: Use module_platform_driverSachin Kamat1-13/+1
module_platform_driver removes some boilerplate code and makes it simple. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video/matrox/matroxfb_maven: Use module_i2c_driver to register driverPeter Huewe1-13/+1
Removing some boilerplate by using module_i2c_driver instead of calling register and unregister in the otherwise empty init/exit functions. Also removed a useless comment as suggested by Jean Delvare. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: vt8623fb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: tridentfb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: tdfxfb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: sisfb: remove unnecessary pci_set_drvdata()Jingoo Han1-4/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: savagefb: remove unnecessary pci_set_drvdata()Jingoo Han1-6/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: s3fb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: pm3fb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: pm2fb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
From 9e2c37ee1d5c2145fac113c483c9e6dd408f10fe Mon Sep 17 00:00:00 2001 From: Jingoo Han <jg1.han@samsung.com> Date: Thu, 12 Sep 2013 15:11:07 +0900 Subject: [PATCH 14/21] video: pm2fb: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: neofb: remove unnecessary pci_set_drvdata()Jingoo Han1-6/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: mb862xxfb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: kyrofb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: intelfb: remove unnecessary pci_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: i810fb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: i740fb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: gxfb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: gx1fb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
From fbb1885952efb15a46d03aac050c38fc9179594e Mon Sep 17 00:00:00 2001 From: Jingoo Han <jg1.han@samsung.com> Date: Thu, 12 Sep 2013 14:42:45 +0900 Subject: [PATCH 06/21] video: gx1fb: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: lxfb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: cyber2000fb: remove unnecessary pci_set_drvdata()Jingoo Han1-5/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: cirrusfb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: carminefb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: arkfb: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19radeonfb: Use pci_dev pm_capJon Mason2-10/+6
Use the already existing pm_cap variable in struct pci_dev for determining the power management offset. This saves the driver from having to keep track of an extra variable. Also, use the pci_power_t value instead of always using the raw value for PCI_D2. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19aty128fb: Use pci_dev pm_capJon Mason1-3/+1
Use the already existing pm_cap variable in struct pci_dev for determining the power management offset. This saves the driver from having to keep track of an extra variable. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Paul Mackerras <paulus@samba.org> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19video: au1100fb: Remove casting the return value which is a void pointerJingoo Han1-1/+1
Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19OMAPDSS: DISPC: set irq_safe for runtime PMTomi Valkeinen1-0/+1
We have a bug with omapdrm, where omapdrm calls dispc's pm_runtime function in atomic context, and dispc's pm_runtime is not marked as irq_safe: BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:952 Dispc's runtime PM callbacks are irq safe, so we can just set the irq_safe flag to fix the issue. However, in the long term, I'd rather have omapdrm manage the runtime PM calls in a better way. Calling get/put for every small operation that touches the dispc registers is very inefficient. It'd be better and cleaner to have clear "in-use" and "not-in-use" states for dispc, so that we don't need to do register context restore for small operations, only to turn dispc off right afterwards. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19OMAPDSS: Return right error during connector probeSathya Prakash M R3-3/+3
While using HDMI connector driver with sil9022 encoder came across issue where connector driver is probed first. This resulted in error. A deffered probe solved this. Most connector drivers need a encoder driver as their video source. This patch ensures we do a probe defferal if video source is not present for connector drivers. Signed-off-by: Sathya Prakash M R <sathyap@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-12Bye, bye, WfW flagLinus Torvalds1-880/+1601
This reverts the Linux for Workgroups thing. And no, before somebody asks, we're not doing Linux95. Not for a few years, at least. Sure, the flag added some color to the logo, and could have remained as a testament to my leet gimp skills. But no. And I'll do this early, to avoid the chance of forgetting when I'm doing the actual rc1 release on the road. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 12:39:54 +0300