summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)AuthorFilesLines
2015-02-12mm: gup: use get_user_pages_unlockedAndrea Arcangeli1-4/+2
This allows those get_user_pages calls to pass FAULT_FLAG_ALLOW_RETRY to the page fault in order to release the mmap_sem during the I/O. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11Merge tag 'fbdev-3.20' of ↵Linus Torvalds39-301/+1223
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev changes from Tomi Valkeinen: - omapdss: add DRA7xxx SoC support - fbdev: support DMT (Display Monitor Timing) calculation * tag 'fbdev-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (40 commits) omapfb: Return error code when applying overlay settings fails OMAPDSS: DPI: DRA7xx support OMAPDSS: HDMI: Add DRA7xx support OMAPDSS: DISPC: program dispc polarities to control module OMAPDSS: DISPC: Add DRA7xx support OMAPDSS: Add Video PLLs for DRA7xx OMAPDSS: Add functions for external control of PLL OMAPDSS: DSS: Add DRA7xx base support Doc/DT: Add DT binding doc for DRA7xx DSS OMAPDSS: add define for DRA7xx HW version OMAPDSS: encoder-tpd12s015: Fix race issue with LS_OE OMAPDSS: OMAP5: fix digit output's allowed mgrs OMAPDSS: constify port arrays OMAPDSS: PLL: add dss_pll_wait_reset_done() OMAPDSS: Add enum dss_pll_id video: fbdev: fix sys_copyarea video/mmpfb: allow modular build fb: via: turn gpiolib and i2c selects into dependencies fbdev: ssd1307fb: return proper error code if write command fails fbdev: fix CVT vertical front and back porch values ...
2015-02-11Merge tag 'media/v3.20-1' of ↵Linus Torvalds1-7/+815
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Some documentation updates and a few new pixel formats - Stop btcx-risc abuse by cx88 and move it to bt8xx driver - New platform driver: am437x - New webcam driver: toptek - New remote controller hardware protocols added to img-ir driver - Removal of a few very old drivers that relies on old kABIs and are for very hard to find hardware: parallel port webcam drivers (bw-qcam, c-cam, pms and w9966), tlg2300, Video In/Out for SGI (vino) - Removal of the USB Telegent driver (tlg2300). The company that developed this driver has long gone and the hardware is hard to find. As it relies on a legacy set of kABI symbols and nobody seems to care about it, remove it. - several improvements at rtl2832 driver - conversion on cx28521 and au0828 to use videobuf2 (VB2) - several improvements, fixups and board additions * tag 'media/v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits) [media] dvb_net: Convert local hex dump to print_hex_dump_debug [media] dvb_net: Use standard debugging facilities [media] dvb_net: Use vsprintf %pM extension to print Ethernet addresses [media] staging: lirc_serial: adjust boolean assignments [media] stb0899: use sign_extend32() for sign extension [media] si2168: add support for 1.7MHz bandwidth [media] si2168: return error if set_frontend is called with invalid parameters [media] lirc_dev: avoid potential null-dereference [media] mn88472: simplify bandwidth registers setting code [media] dvb: tc90522: re-add symbol-rate report [media] lmedm04: add read snr, signal strength and ber call backs [media] lmedm04: Create frontend call back for read status [media] lmedm04: create frontend callbacks for signal/snr/ber/ucblocks [media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb [media] lmedm04: Increase Interupt due time to 200 msec [media] cx88-dvb: whitespace cleanup [media] rtl28xxu: properly initialize pdata [media] rtl2832: declare functions as static [media] rtl2830: declare functions as static [media] rtl2832_sdr: add kernel-doc comments for platform_data ...
2015-02-11Merge branch 'for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: "Summary: - switch to asm-generic/futex.h - various cleanups - defconfig updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/defconfig: Enable Ethernet bridging m68k/defconfig: Enable Atari EtherNAT and EtherNEC Ethernet support m68k/defconfig: Enable automounting of devtmpfs at /dev m68k/defconfig: Enable early printk support m68k/defconfig: Enable test modules m68k/defconfig: Refresh defconfigs for v3.16-rc1--v3.19-rc2 m68k/atari: Remove obsolete IRQ_TYPE_* sound: dmasound_atari: Remove obsolete IRQ_TYPE_SLOW video: atafb: Remove obsolete IRQ_TYPE_PRIO parport: parport_atari: Remove obsolete IRQ_TYPE_SLOW net: atarilance: Remove obsolete IRQ_TYPE_PRIO m68k/atari: Remove obsolete keyboard_tasklet scheduling m68k/mac: Fix scsi_type for Mac LC and similar models m68k: Switch to asm-generic/futex.h m68k/mvme147: config.c - Remove unused functions m68k/atari: atakeyb.c - Remove some unused functions m68k/mvme16x: rtc - Don't use module_init in non-modular code
2015-02-04Merge branches '3.20/fbdev' and '3.20/omapdss' into for-nextTomi Valkeinen19-60/+855
Merge fbdev topic branches
2015-02-04omapfb: Return error code when applying overlay settings failsPeter Meerwald1-2/+5
the check of the return code is missing, user space does not get notified about the error condition: omapdss OVERLAY error: overlay 2 horizontally not inside the display area (403 + 800 >= 800) omapdss APPLY error: failed to apply settings: illegal configuration. Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-04OMAPDSS: DPI: DRA7xx supportTomi Valkeinen1-0/+26
Add support for DRA7xx DPI output. DRA7xx has three DPI outputs, each of which gets its input from a DISPC channel. However, DRA72x has only one video PLL, and DRA74x has two video PLLs. In both cases the video PLLs need to be shared between multiple outputs. The driver doesn't handle this at the moment. Also, DRA7xx requires configuring CONTROL module bits to route the clock from the PLL to the used DISPC channel. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-04OMAPDSS: HDMI: Add DRA7xx supportTomi Valkeinen3-0/+7
Add support for DRA7xx to the HDMI driver. The HDMI block on DRA7xx is the same as on OMAP5, except we need to enable and disable the HDMI PLL via the CONTROL module. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-04OMAPDSS: DISPC: program dispc polarities to control moduleTomi Valkeinen1-0/+40
On DRA7xx, DISPC needs to write output signal polarities not only to a DISPC register, like for all earlier DSS versions, but to control module's CTRL_CORE_SMA_SW_1 register. This patch adds support to write the polarities to control module. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-04OMAPDSS: DISPC: Add DRA7xx supportTomi Valkeinen1-0/+14
Add DRA7xx support to DISPC driver. The DISPC block is the same as on OMAP5, except the PLL's used for clocking are "videoX", not "dsiX". Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-04OMAPDSS: Add Video PLLs for DRA7xxTomi Valkeinen4-6/+273
DRA7xx SoCs have one (DRA72x) or two (DRA74x) video PLLs. They are basically the same as DSI PLLs on OMAPs, but without the rest of the DSI hardware. The video PLLs also require some configuration via the CONTROL module. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-04OMAPDSS: Add functions for external control of PLLTomi Valkeinen2-0/+119
Add functions which configure the control module register CTRL_CORE_DSS_PLL_CONTROL found in DRA7xx SoCs. This register configures whether the PLL registers are accessed internally by DSS, or externally using OCP2SCP interface. They also configure muxes which route the PLL output to a particular LCD overlay manager within DSS. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-04OMAPDSS: DSS: Add DRA7xx base supportTomi Valkeinen4-0/+44
Add base support for DRA7xx to DSS core. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-04OMAPDSS: encoder-tpd12s015: Fix race issue with LS_OETomi Valkeinen1-47/+10
A race issue has been observed with the encoder-tpd12s015 driver, which leads to errors when trying to read EDID. This has only now been observed, as OMAP4 and OMAP5 boards used SoC's GPIOs for LS_OE GPIO. On dra7-evm boards, the LS_OE is behind a i2c controlled GPIO expander, which increases the time to set the LS_OE. This patch simplifies the handling of the LS_OE gpio in the driver by removing the interrupt handling totally. The only time we actually need to enable LS_OE is when we are reading the EDID, and thus we can just set and clear the LS_OE gpio inside the read_edid() function. This also has the additional benefit of very slightly decreasing the power consumption. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-04OMAPDSS: OMAP5: fix digit output's allowed mgrsTomi Valkeinen1-1/+1
The OMAP5 HW supports directing DIGIT channel to DPI output, but the driver doesn't support that. However, we have marked that configuration as possible in the dss features, so in certain cases the driver tries to use that configuration, leading to broken display. Fix the problem by allowing DIGIT channel to go only to HDMI output. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-04OMAPDSS: constify port arraysTomi Valkeinen1-3/+3
The port arrays are constant data, so set them as 'const'. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-04OMAPDSS: PLL: add dss_pll_wait_reset_done()Tomi Valkeinen2-0/+11
Add a helper function to wait until the PLL's reset is done. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-04OMAPDSS: Add enum dss_pll_idTomi Valkeinen3-0/+9
In some cases we need global identifiers for the DSS PLLs, for example when configuring clock muxing on DRA7. For this purpose let's add a 'enum dss_pll_id'. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-30video: fbdev: fix sys_copyareaMans Rullgard1-72/+65
The sys_copyarea() function performs the same operation as cfb_copyarea() but using normal memory access instead of I/O accessors. Since the introduction of sys_copyarea(), there have been two fixes to cfb_copyarea(): - 00a9d699 ("framebuffer: fix cfb_copyarea") - 5b789da8 ("framebuffer: fix screen corruption when copying") This patch incorporates the fixes into sys_copyarea() as well. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-30video/mmpfb: allow modular buildArnd Bergmann2-2/+4
The frame buffer core can be a module, which means any fb drivers should be able to build as modules too. This turns mmpfb into a tristate option to allow that and fix a possible randconfig build error. drivers/built-in.o: In function `modes_setup': :(.text+0x11b34): undefined reference to `fb_videomode_to_modelist' :(.text+0x11b5c): undefined reference to `fb_videomode_to_var' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-30fb: via: turn gpiolib and i2c selects into dependenciesArnd Bergmann1-3/+1
Device driver should not directly select subsystems. In this case we get build warnings like warning: (ARCH_REQUIRE_GPIOLIB && PINCTRL_AT91 && PINCTRL_NOMADIK && MFD_TC6393XB && FB_VIA) selects GPIOLIB which has unmet direct dependencies (ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB) which we can avoid using the normal 'depends on' statement. Also, this patch makes it possible for DRM drivers to have a dependency on GPIOLIB without getting circular Kconfig dependencies. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-30fbdev: ssd1307fb: return proper error code if write command failsPrabhakar Lad1-14/+53
this patch fixes ssd1307fb_ssd1306_init() function to return proper error codes in case of failures. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-27[media] hdmi: rename HDMI_AUDIO_CODING_TYPE_EXT_STREAM to _EXT_CTHans Verkuil1-1/+1
As per the suggestion of Thierry Reding rename HDMI_AUDIO_CODING_TYPE_EXT_STREAM to HDMI_AUDIO_CODING_TYPE_EXT_CT to be consistent with the CEA-861 spec. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27[media] hdmi: added unpack and logging functions for InfoFramesMartin Bugge1-7/+815
When receiving video it is very useful to be able to unpack the InfoFrames. Logging is useful as well, both for transmitters and receivers. Especially when implementing the VIDIOC_LOG_STATUS ioctl (supported by many V4L2 drivers) for a receiver it is important to be able to easily log what the InfoFrame contains. This greatly simplifies debugging. Signed-off-by: Martin Bugge <marbugge@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27fbdev: fix CVT vertical front and back porch valuesTomi Valkeinen1-3/+3
CVT v1.1 spec says: "the vertical front porch shall in all cases be fixed to 3 lines". The code in fbcvt.c instead sets the _back_ porch to 3 (plus margin). After swapping cvt.v_front_porch and cvt.v_back_porch the resulting timings were in line with CVT timings in VESA DMT spec. The bug seems to be more than 9 years old, but I presume it has not been noticed as usually the video timings come from the EDID or from the timing tables in fbdev, and probably swapped values for vfp and vbp work fine for most of the displays. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: David Ung <davidu@nvidia.com> Cc: Antonino A. Daplas <adaplas@gmail.com>
2015-01-26video: hgafb: remove unneeded comparisonSudip Mukherjee1-2/+1
var->yoffset is of the type __u32, hence the comparison will always be false. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-26fbcon: Remove unused vblank cursor codeScot Doyle1-4/+0
commit 1fa0b29f3a43 ("fbdev: Kill Atari vblank cursor blinking") rendered vbl_cursor_cnt and therefore CURSOR_DRAW_DELAY unused in fbcon.c, so remove them. Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-19video: fbdev: Fix sparse warning messagesDavid Ung1-37/+37
Use NULL instead of 0 for the last entry of dmt_modes struct. Supresses "sparse: Using plain integer as NULL pointer" warning. Signed-off-by: David Ung <davidu@nvidia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-15video: atafb: Remove obsolete IRQ_TYPE_PRIOGeert Uytterhoeven1-2/+1
IRQ_TYPE_PRIO is no longer used by the Atari platform interrupt code since commit 734085651c9b80aa ("[PATCH] m68k: convert atari irq code") in v2.6.18-rc1, so drop it. Note that its value has been reused for a different purpose (IRQ_TYPE_EDGE_FALLING) since commit 6a6de9ef5850d063 ("[PATCH] genirq: core") in v2.6.18-rc1. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-15video: fbdev: Validate mode timing against monspecDavid Ung1-9/+18
fbmon may generate mode timings that are out of spec of the monitor. eg DELL U2410 has a max clock 170mhz but advertises a resolutions of 1920x1200@60 in its Standard Timings using 2byte code of D1 00. When this is looked up in the DMT table it gives it a 193mhz clock. Although the DELL monitor supports 1920x1200@60, it can only run with reduced timings at 154mhz or DMT id 0x44 which has no STD 2byte code. This patch checks to see if the mode can be supported by the monitor by comparing against monspecs.dclkmax. Signed-off-by: David Ung <davidu@nvidia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-15video: fbdev: Check Standard Timing against DMTDavid Ung2-34/+126
Add the VESA Display Monitor Timing (DMT) table. During parsing of Standard Timings, it compare the 2 byte STD code with DMT to see what the VESA mode should be. If there is no entry in the vesa_modes table or no match found, it fallsback to the GTF timings. Signed-off-by: David Ung <davidu@nvidia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-15video: fbdev: Add additional vesa modesDavid Ung1-0/+27
Add high resolution modes to vesa_modes struct. Signed-off-by: David Ung <davidu@nvidia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-15fbdev: ssd1307fb: set default height if not found in DT nodeLad, Prabhakar1-1/+1
this patch sets the default height if its not found in DT. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-15fbdev: ssd1307fb: drop unused function ssd1307fb_write_data()Lad, Prabhakar1-17/+0
this patch drops the unused function ssd1307fb_write_data(). Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13video: Drop superfluous "select VT_HW_CONSOLE_BINDING"Geert Uytterhoeven1-1/+0
commit 765d5b9c2b72f5b99722cdfcf4bf8f88c556cf92 ("fbdev: fbcon: select VT_HW_CONSOLE_BINDING") made FRAMEBUFFER_CONSOLE always select VT_HW_CONSOLE_BINDING, but forgot to remove select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE from the individual drivers' sections that already did this before. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13fbdev/broadsheetfb: fix memory leakColin Ian King1-3/+5
static code analysis from cppcheck reports: [drivers/video/fbdev/broadsheetfb.c:673]: (error) Memory leak: sector_buffer sector_buffer is not being kfree'd on each call to broadsheet_spiflash_rewrite_sector(), so free it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13console/dummy: Move screen size selection from CPP to KconfigGeert Uytterhoeven2-10/+11
PA-RISC already handled the dummy console screen size selection in Kconfig, so generalize this to other platforms. ARM keeps on using screen_info, which is filled in by platform-specific code, or from ATAGS. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13video: vt8500lcdfb: remove unneeded continueSudip Mukherjee1-3/+1
continue is not needed at the end of a for loop, also removed the braces which were no longer required. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13fbdev: savage: remove unused variableSudip Mukherjee1-9/+3
vga_in8() was storing the return value in tmp, but that return value was never used again. so it should be safe to remove those variables. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13fbdev: geocode: remove unneeded NULL checkSudip Mukherjee2-8/+4
the check for info is not required as we are checking it immediately after gxfb_init_fbinfo() and lxfb_init_fbinfo() and returnig -ENOMEM if it is NULL. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13fbdev: omap2: Fix typo in tvc_probe_pdataRasmus Villemoes1-1/+1
Assigning ddata->invert_polarity to itself is not very useful; the context suggests that the right-hand side should have been pdata->invert_polarity. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13simplefb: Fix build failure on SparcHans de Goede1-1/+1
of_platform_device_create is only defined when CONFIG_OF_ADDRESS is set, which is normally always the case when CONFIG_OF is defined, except on Sparc, so explicitly check for CONFIG_OF_ADDRESS rather then for CONFIG_OF. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13fbdev: vgastate: remove trailing whitespacesAsaf Vertz1-41/+41
Fixed a coding style error, trailing whitespace. Signed-off-by: Asaf Vertz <asaf.vertz@tandemg.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13video: ocfb: Fix data type warningQiang Chen1-1/+1
When allocate framebuffer memory using dma_alloc_coherent(), we'd better use dma_addr_t instead of phys_addr_t. Because the address we got in fact is DMA or bus address for the platform. This patch also fixes below build warning: drivers/video/fbdev/ocfb.c:335:2: warning: passing argument 3 of ‘dma_alloc_attrs’ from incompatible pointer type [enabled by default] Signed-off-by: Qiang Chen <qiang2.chen@sonymobile.com> Acked-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13video: omapdss: Add opa362 driverMarek Belisko3-0/+292
opa362 is amplifier for video and can be connected to the tvout pads of the OMAP3. It has one gpio control for enable/disable of the output (high impedance). Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13fbdev: geocode: remove unneeded NULL checkSudip Mukherjee1-4/+2
the check for info is not required as we are checking it immediately after gx1fb_init_fbinfo() and returnig -ENOMEM if it is NULL. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13atyfb: mark DMI system id table as __initconstMathias Krause1-3/+6
We can mark the DMI system id table as __initconst by using a helper variable that'll tell us if we need to unregister the reboot notifier in atyfb_exit() instead of matching the DMI system id again. This frees up ~680 bytes of runtime memory, the DMI table occupies. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-12-30OMAPDSS: SDI: fix output port_numTomi Valkeinen1-0/+2
After the commit ef691ff48bc8 (OMAPDSS: DT: Get source endpoint by matching reg-id) we look for the SDI output using the port number. However, the SDI driver doesn't set the port number, which causes the SDI display to not initialize. Fix this by setting the SDI port number to 1. We use a hardcoded value, as SDI was used only on OMAP3 and it's always port number 1 there. Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-12-30video/fbdev: fix defio's fsyncTomi Valkeinen1-2/+3
fb_deferred_io_fsync() returns the value of schedule_delayed_work() as an error code, but schedule_delayed_work() does not return an error. It returns true/false depending on whether the work was already queued. Fix this by ignoring the return value of schedule_delayed_work(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: stable@vger.kernel.org
2014-12-29video/logo: prevent use of logos after they have been freedTomi Valkeinen1-1/+16
If the probe of an fb driver has been deferred due to missing dependencies, and the probe is later ran when a module is loaded, the fbdev framework will try to find a logo to use. However, the logos are __initdata, and have already been freed. This causes sometimes page faults, if the logo memory is not mapped, sometimes other random crashes as the logo data is invalid, and sometimes nothing, if the fbdev decides to reject the logo (e.g. the random value depicting the logo's height is too big). This patch adds a late_initcall function to mark the logos as freed. In reality the logos are freed later, and fbdev probe may be ran between this late_initcall and the freeing of the logos. In that case we will miss drawing the logo, even if it would be possible. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: stable@vger.kernel.org
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-19 03:06:56 +0300