summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)AuthorFilesLines
2010-08-05Merge branch 'for-next' of ↵Linus Torvalds3-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
2010-08-04Merge branch 'v4l_for_2.6.35' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (243 commits) V4L/DVB: sms: Convert IR support to use the Remote Controller core V4L/DVB: sms: properly initialize IR phys and IR name V4L/DVB: standardize names at rc-dib0700 tables V4L/DVB: smsusb: enable IR port for Hauppauge WinTV MiniStick V4L/DVB: dib0700: Fix RC protocol logic to properly handle NEC/NECx and RC-5 V4L/DVB: dib0700: properly implement IR change_protocol V4L/DVB: dib0700: break keytable into NEC and RC-5 variants V4L/DVB: dib0700: avoid bad repeat V4L/DVB: Port dib0700 to rc-core V4L/DVB: Add a keymap file with dib0700 table V4L/DVB: dvb-usb: add support for rc-core mode V4L/DVB: dvb-usb: prepare drivers for using rc-core V4L/DVB: dvb-usb: get rid of struct dvb_usb_rc_key V4L/DVB: rj54n1cb0c: fix a comment in the driver V4L/DVB: V4L2: sh_vou: VOU does support the full PAL resolution too V4L/DVB: V4L2: sh_mobile_camera_ceu: add support for CSI2 V4L/DVB: V4L2: soc-camera: add a MIPI CSI-2 driver for SH-Mobile platforms V4L/DVB: V4L2: soc-camera: export soc-camera bus type for notifications V4L/DVB: V4L2: mediabus: add 12-bit Bayer and YUV420 pixel formats V4L/DVB: mediabus: fix ambiguous pixel code names ...
2010-08-04Merge branch 'master' into for-nextJiri Kosina13-72/+137
2010-08-04Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2-19/+86
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits) ARM: AMBA: Add pclk support to AMBA bus infrastructure ARM: 6278/2: fix regression in RealView after the introduction of pclk ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128 ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY ARM: 6246/1: mmci: support larger MMCIDATALENGTH register ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants ARM: 6244/1: mmci: add variant data and default MCICLOCK support ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback ARM: 6274/1: add global control registers definition header file for nuc900 mx2_camera: fix type of dma buffer virtual address pointer mx2_camera: Add soc_camera support for i.MX25/i.MX27 arm/imx/gpio: add spinlock protection ARM: Add support for the LPC32XX arch ARM: LPC32XX: Arch config menu supoport and makefiles ARM: LPC32XX: Phytec 3250 platform support ARM: LPC32XX: Misc support functions ARM: LPC32XX: Serial support code ARM: LPC32XX: System suspend support ARM: LPC32XX: GPIO, timer, and IRQ drivers ARM: LPC32XX: Clock driver ...
2010-08-02V4L/DVB: drivers/video/omap2/displays: add missing mutex_unlockJulia Lawall1-1/+3
Add a mutex_unlock missing on the error paths. The use of the mutex is balanced elsewhere in the file. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1; @@ * mutex_lock(E1,...); <+... when != E1 if (...) { ... when != E1 * return ...; } ...+> * mutex_unlock(E1,...); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-31Merge branch 'devel-stable' into develRussell King1-1/+71
Conflicts: arch/arm/kernel/entry-armv.S arch/arm/kernel/setup.c arch/arm/mm/init.c
2010-07-31Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb', 'nomadik', 'nuc', ↵Russell King1-18/+15
'pl', 'spear' and 'versatile' into devel
2010-07-31Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-0/+3
* master.kernel.org:/home/rmk/linux-2.6-arm: cyber2000fb: fix console in truecolor modes cyber2000fb: fix machine hang on module load SA1111: Eliminate use after free ARM: Fix Versatile/Realview/VExpress MMC card detection sense ARM: 6279/1: highmem: fix SMP preemption bug in kmap_high_l1_vipt ARM: Add barriers to io{read,write}{8,16,32} accessors as well ARM: 6273/1: Add barriers to the I/O accessors if ARM_DMA_MEM_BUFFERABLE ARM: 6272/1: Convert L2x0 to use the IO relaxed operations ARM: 6271/1: Introduce *_relaxed() I/O accessors ARM: 6275/1: ux500: don't use writeb() in uncompress.h ARM: 6270/1: clean files in arch/arm/boot/compressed/ ARM: Fix csum_partial_copy_from_user()
2010-07-31cyber2000fb: fix console in truecolor modesOndrej Zary1-0/+1
Return value was not set to 0 in setcolreg() with truecolor modes. This causes fb_set_cmap() to abort after first color, resulting in blank palette - and blank console in 24bpp and 32bpp modes. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-31cyber2000fb: fix machine hang on module loadOndrej Zary1-0/+2
I was testing two CyberPro 2000 based PCI cards on x86 and the machine always hanged completely when the cyber2000fb module was loaded. It seems that the card hangs when some registers are accessed too quickly after writing RAMDAC control register. With this patch, both card work. Add delay after RAMDAC control register write to prevent hangs on module load. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King1-1/+71
devel-stable
2010-07-27ARM: OMAP: Convert OMAPFB and VRAM SDRAM reservation to LMBRussell King1-18/+15
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26VIDEO: Au1100fb: Fix section mismatchRalf Baechle1-3/+3
WARNING: drivers/video/built-in.o(.data+0x360): Section mismatch in reference from the variable au1100fb_driver to the function .init.text:au1100fb_drv_probe() The variable au1100fb_driver references the function __init au1100fb_drv_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing which triggers of a slew of further mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function au1100fb_drv_probe() to the variable .init.data:au1100fb_fix The function __devinit au1100fb_drv_probe() references a variable __initdata au1100fb_fix. If au1100fb_fix is only used by au1100fb_drv_probe then annotate au1100fb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x21c): Section mismatch in reference from the function au1100fb_drv_probe() to the variable .init.data:au1100fb_var The function __devinit au1100fb_drv_probe() references a variable __initdata au1100fb_var. If au1100fb_var is only used by au1100fb_drv_probe then annotate au1100fb_var with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26VIDEO: PMAGB-B: Fix section mismatchRalf Baechle1-6/+6
WARNING: drivers/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_fix The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_fix. If pmagbafb_fix is only used by pmagbafb_probe then annotate pmagbafb_fix with a matching annotation. Fixing this one triggers a few more mismatches in order: WARNING: drivers/video/built-in.o(.devinit.text+0x414): Section mismatch in reference from the function pmagbbfb_probe() to the variable .init.data:pmagbbfb_fix The function __devinit pmagbbfb_probe() references a variable __initdata pmagbbfb_fix. If pmagbbfb_fix is only used by pmagbbfb_probe then annotate pmagbbfb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x45c): Section mismatch in reference from the function pmagbbfb_probe() to the variable .init.data:pmagbbfb_defined The function __devinit pmagbbfb_probe() references a variable __initdata pmagbbfb_defined. If pmagbbfb_defined is only used by pmagbbfb_probe then annotate pmagbbfb_defined with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x5fc): Section mismatch in reference from the function pmagbbfb_probe() to the function .init.text:pmagbbfb_screen_setup() The function __devinit pmagbbfb_probe() references a function __init pmagbbfb_screen_setup(). If pmagbbfb_screen_setup is only used by pmagbbfb_probe then annotate pmagbbfb_screen_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x6f4): Section mismatch in reference from the function pmagbbfb_probe() to the function .init.text:pmagbbfb_osc_setup() The function __devinit pmagbbfb_probe() references a function __init pmagbbfb_osc_setup(). If pmagbbfb_osc_setup is only used by pmagbbfb_probe then annotate pmagbbfb_osc_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x5f8): Section mismatch in reference from the function pmagbbfb_osc_setup() to the variable .init.data:pmagbbfb_freqs.15993 The function __devinit pmagbbfb_osc_setup() references a variable __initdata pmagbbfb_freqs.15993. If pmagbbfb_freqs.15993 is only used by pmagbbfb_osc_setup then annotate pmagbbfb_freqs.15993 with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26VIDEO: PMAG-BA: Fix section mismatchRalf Baechle1-3/+3
WARNING: drivers/video/built-in.o(.data+0x1e0): Section mismatch in reference fr om the variable pmagbafb_driver to the function .init.text:pmagbafb_probe() The variable pmagbafb_driver references the function __init pmagbafb_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing this one triggers 2 more: WARNING: drivers/video/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_fix The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_fix. If pmagbafb_fix is only used by pmagbafb_probe then annotate pmagbafb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x108): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_defined The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_defined. If pmagbafb_defined is only used by pmagbafb_probe then annotate pmagbafb_defined with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26VIDEO. gbefb: Fix section mismatches.Ralf Baechle1-8/+8
WARNING: drivers/video/built-in.o(.devinit.text+0x54): Section mismatch in reference from the function gbefb_probe() to the function .init.text:gbefb_setup() The function __devinit gbefb_probe() references a function __init gbefb_setup(). If gbefb_setup is only used by gbefb_probe then annotate gbefb_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x208): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:mode_option The function __devinit gbefb_probe() references a variable __initdata mode_option. If mode_option is only used by gbefb_probe then annotate mode_option with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x214): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_mode The function __devinit gbefb_probe() references a variable __initdata default_mode. If default_mode is only used by gbefb_probe then annotate default_mode with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x23c): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_var The function __devinit gbefb_probe() references a variable __initdata default_var. If default_var is only used by gbefb_probe then annotate default_var with a matching annotation. Fixing these results in more mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_LCD The function __devinit gbefb_setup() references a variable __initdata default_var_LCD. If default_var_LCD is only used by gbefb_setup then annotate default_var_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x14c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_LCD The function __devinit gbefb_setup() references a variable __initdata default_mode_LCD. If default_mode_LCD is only used by gbefb_setup then annotate default_mode_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x150): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_CRT The function __devinit gbefb_setup() references a variable __initdata default_var_CRT. If default_var_CRT is only used by gbefb_setup then annotate default_var_CRT with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x154): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_CRT The function __devinit gbefb_setup() references a variable __initdata default_mode_CRT. If default_mode_CRT is only used by gbefb_setup then annotate default_mode_CRT with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26imxfb: add pwmr controlled backlight supportEric Bénard1-1/+71
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-21Fix up trivial spelling errors ('taht' -> 'that')Linus Torvalds1-1/+1
Pointed out by Lucas who found the new one in a comment in setup_percpu.c. And then I fixed the others that I grepped for. Reported-by: Lucas <canolucas@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-19update email addressPavel Machek1-2/+2
pavel@suse.cz no longer works, replace it with working address. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-30drivers/video/nuc900fb.c: fix lcd build errorWan ZongShun1-2/+0
Fix a nuc900 lcd build error. Since the 'nuc900_driver_clksrc_div()' API cannot be merged into mainline successfully, I removed this clock source selection hook in this driver. This means nuc900 lcd driver has to select default clock source from the external crystal now. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Qiang Wang <rurality.wq@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-30lxfb: fix incorrect __init annotationAndres Salomon1-8/+10
WARNING: vmlinux.o(.data+0x196e8): Section mismatch in reference from the variable lxfb_driver to the function .init.text:lxfb_probe() The variable lxfb_driver references the function __init lxfb_probe() This changes lxfb_probe and friends to use __devinit, and also adds __devexit to lxfb_remove. Signed-off-by: Andres Salomon <dilinger@queued.net> Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-30gxfb: fix incorrect __init annotationAndres Salomon1-8/+12
WARNING: vmlinux.o(.data+0x195d8): Section mismatch in reference from the variable gxfb_driver to the function .init.text:gxfb_probe() The variable gxfb_driver references the function __init gxfb_probe() This changes gxfb_probe and friends to use __devinit, and also adds __devexit to gxfb_remove. Signed-off-by: Andres Salomon <dilinger@queued.net> Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-27Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds2-14/+5
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: OMAP: OMAPFB: fix rfbi.c compile error OMAPFB: LCDC: change update_mode to DISABLED when going suspend
2010-06-16Merge branch 'master' into for-nextJiri Kosina66-471/+4345
2010-06-16fix typos concerning "initiali[zs]e"Uwe Kleine-König2-2/+2
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-15OMAP: OMAPFB: fix rfbi.c compile errorTomi Valkeinen1-2/+3
The code in rfbi.c tried to get the omapdss platform_device via a static member defined in dispc.c, leading to a compile error. The same platform_device is available through rfbi-struct. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-06-15OMAPFB: LCDC: change update_mode to DISABLED when going suspendJanusz Krzysztofik1-12/+2
I was observing the following error messages on my OMAP1 based Amstrad Delta board when first changing from text to graphics mode or vice versa after the LCD display had been blanked: omapfb omapfb: timeout waiting for FRAME DONE with a followup error message while unblanking it back: omapfb omapfb: resetting (status 0xffffffb2,reset count 1) As a visible result, image pixels happened to be shifted by a few bits, giving wrong colors. Examining the code, I found that this problem occures when an OMAP1 internal LCD controller is disabled from omap_lcdc_suspend() and then a subsequent omap_lcdc_setup_plane() calls disable_controller() again. This potentially error provoking behaviour is triggered by the lcdc.update_mode flag being kept at OMAP_AUTO_UPDATE, regardless of the controller and panel being suspended. This patch tries to correct the problem by replacing both omap_lcdc_suspend() and omap_lcdc_resume() function bodies with single calls to omap_lcdc_set_update_mode() with a respective OMAP_UPDATE_DISABLE or OMAP_AUTO_UPDATE argument. As a result, exactly the same lower level operations are performed, with addition of changing the lcdc.update_mode flag to a value better suited for the controller state. This prevents any further calls to disable_controller() from omap_lcdc_setup_plane() while the display is suspended. Created against linux-2.6.34-rc7. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-06-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds1-3/+3
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits) sh: Make intc messages consistent via pr_fmt. sh: make sure static declaration on ms7724se sh: make sure static declaration on mach-migor sh: make sure static declaration on mach-ecovec24 sh: make sure static declaration on mach-ap325rxa clocksource: sh_cmt: compute mult and shift before registration clocksource: sh_tmu: compute mult and shift before registration sh: PIO disabling for x3proto and urquell. sh: mach-sdk7786: conditionally disable PIO support. sh: support for platforms without PIO. usb: r8a66597-hcd pio to mmio accessor conversion. usb: gadget: r8a66597-udc pio to mmio accessor conversion. usb: gadget: m66592-udc pio to mmio accessor conversion. sh: add romImage MMCIF boot for sh7724 and Ecovec V2 sh: add boot code to MMCIF driver header sh: prepare MMCIF driver header file sh: allow romImage data between head.S and the zero page sh: Add support MMCIF for ecovec sh: remove duplicated #include input: serio: disable i8042 for non-cayman sh platforms. ...
2010-06-05fbdev: fix frame buffer devices menuThadeu Lima de Souza Cascardo1-3/+3
Commit f601441916d1e19291d0b4f044b4a7551e2924d0 ("imxfb: add support for i.MX25:) has inserted the symbol HAVE_FB_IMX, which does not depend on FB after the menuconfig FB. This breaks the menu, presenting most of the drivers outside of it, when using menuconfig. Moving the symbol to the start of the file, just like HAVE_FB_ATMEL, fixes the problem without breaking it for iMX25 configurations (tested with ARCH=arm, no build). Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Baruch Siach <baruch@tkos.co.il> Cc: "David S. Miller" <davem@davemloft.net> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-05fb_defio: redo fix for non-dirty ptesAlbert Herranz1-1/+11
As pointed by Nick Piggin, ->page_mkwrite provides a way to keep a page locked until the associated PTE is marked dirty. Re-implement the fix by using this mechanism. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-05Revert "fb_defio: fix for non-dirty ptes"Albert Herranz1-32/+8
This reverts commit 49bbd815fd8ba26d0354900b783b767c7f47c816 ("fb_defio: fix for non-dirty ptes"). Although the fix provided is correct, it's been suggested to avoid the underlying race in the same way as it is currently done in filesystems like NFS, for maintainability. A following patch "fb_defio: redo fix for non-dirty ptes" will provide such an alternate fix. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-04Merge branch 'i2c-for-linus' of ↵Linus Torvalds2-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Remove all i2c_set_clientdata(client, NULL) in drivers i2c/busses: Move two drivers to embedded section i2c: Rename i2c_check_addr to i2c_check_addr_busy i2c: Document reserved I2C addresses i2c: Check for address validity on client registration i2c: Share the I2C device presence detection code Documentation/i2c: Checkpatch cleanup
2010-06-03Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds7-7/+7
* 'merge' of git://git.secretlab.ca/git/linux-2.6: of/powerpc: fix fsl_msi device node pointer of/watchdog: gef_wdt.c: fix build breakage of/edac: fix build breakage in drivers of/net: fs_enet/mii-bitbang.c: fix build breakage of/usb: fsl_qe_udc.c: fix build breakage of/crypto: crypto4xx_core.c: fix build breakage of/dma: fix build breakage in ppc4xx adma driver of/mtd: nand: fix build breakage in drivers of/video: fix build breakage in FB drivers of/pcmcia: m8xx_pcmcia.c: Fix build failures of/rtc: rtc-mpc5121.c: Fix build failures of/dma: mpc512x_dma.c: Fix build failures of/mtd/nand: mpc5121_nfc.c: Fix build failures of/spi: mpc512x_psc_spi.c: Fix build failures watchdog: Fix build failure with OF changes of/spi: Fix build failure on spi_ppc4xx.c of/usb: fix build error due to of_node pointer move of/powerpc: fix 85xx RapidIO device node pointer
2010-06-03i2c: Remove all i2c_set_clientdata(client, NULL) in driversWolfram Sang2-4/+0
I2C drivers can use the clientdata-pointer to point to private data. As I2C devices are not really unregistered, but merely detached from their driver, it used to be the drivers obligation to clear this pointer during remove() or a failed probe(). As a couple of drivers forgot to do this, it was agreed that it was cleaner if the i2c-core does this clearance when appropriate, as there is no guarantee for the lifetime of the clientdata-pointer after remove() anyhow. This feature was added to the core with commit e4a7b9b04de15f6b63da5ccdd373ffa3057a3681 to fix the faulty drivers. As there is no need anymore to clear the clientdata-pointer, remove all current occurrences in the drivers to simplify the code and prevent confusion. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-06-03of/video: fix build breakage in FB driversAnatolij Gustschin7-7/+7
Fixes build errors in a number of framebuffer drivers caused by the OF device_node pointer being moved into struct device Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-06-03Fix colors for Mach64Mikulas Patocka1-3/+6
Use the same color-calculating algorithm as in atyfb_imageblit in this driver or in generic cfb_fillrect. This patch fixes bad colors when using an accelerator in 15-bit and 16-bit modes. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-31Merge branch 'master' of ↵Paul Mundt31-314/+3048
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2010-05-28drop unused dentry argument to ->fsyncChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds12-53/+2506
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: gta02: Use pcf50633 backlight driver instead of platform backlight driver. backlight: pcf50633: Register a pcf50633-backlight device in pcf50633 core driver. backlight: Add pcf50633 backlight driver backlight: 88pm860x_bl: fix error handling in pm860x_backlight_probe backlight: max8925_bl: Fix error handling path backlight: l4f00242t03: fix error handling in l4f00242t03_probe backlight: add S6E63M0 AMOLED LCD Panel driver backlight: adp8860: add support for ADP8861 & ADP8863 backlight: mbp_nvidia_bl - Fix DMI_SYS_VENDOR for MacBook1,1 backlight: Add Cirrus EP93xx backlight driver backlight: l4f00242t03: Fix regulators handling code in remove function backlight: fix adp8860_bl build errors backlight: new driver for the ADP8860 backlight parts backlight: 88pm860x_bl - potential memory leak backlight: mbp_nvidia_bl - add support for older MacBookPro and MacBook 6,1. backlight: Kconfig cleanup backlight: backlight_device_register() return ERR_PTR()
2010-05-27fbdev: bf54x-lq043fb: fix unused warnings with backlight codeMike Frysinger1-3/+4
The current backlight code is stubbed out, so the new props changes added some warnings: drivers/video/bf54x-lq043fb.c: In function 'bfin_bf54x_probe': drivers/video/bf54x-lq043fb.c:666: warning: label 'out9' defined but not used drivers/video/bf54x-lq043fb.c:504: warning: unused variable 'props' Fix em ! Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27fbdev: bfin-t350mcqb-fb: avoid unused warnings in backlight codeMike Frysinger1-3/+4
The current backlight code is stubbed out, so the new props changes added some warnings about unused label/prop. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27drivers/video/via: use memdup_userJulia Lawall1-8/+3
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27add support for S3 Trio3D/1X/2XOndrej Zary1-20/+81
Add support for S3 Trio3D/1X (86C360) and S3 Trio3D/2X (86C362 and 86C368) cards to s3fb driver. Tested with 86C362 AGP and 86C368 PCI&AGP. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-26backlight: Add pcf50633 backlight driverLars-Peter Clausen3-0/+198
This patch adds a backlight driver for controlling the pcf50633 LED module. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-26backlight: 88pm860x_bl: fix error handling in pm860x_backlight_probeAxel Lin1-0/+1
This patch properly unregisters a previously registered backlight device object in error handling Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-26backlight: max8925_bl: Fix error handling pathAxel Lin1-0/+1
Properly unregister a previously registered backlight device object in error handling of max8925_backlight_probe. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-26backlight: l4f00242t03: fix error handling in l4f00242t03_probeAxel Lin1-4/+3
Error handling fixes: 1. In the case of kzalloc failure, simple return -ENOMEM instead of goto err. ( priv is NULL in this case ) 2. In the case of gpio_request fail for reset_gpio and data_enable_gpio, properly release resources by goto err and err2 respectively. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-26backlight: add S6E63M0 AMOLED LCD Panel driverInKi Dae4-0/+1195
This is S6E63M0 AMOLED LCD Panel(480x800) driver using 3-wired SPI interface also almost features for lcd panel driver has been implemented in here. and I added new structure common for all the lcd panel drivers to include/linux/lcd.h file. LCD Panel driver needs interfaces for controlling device power such as power on/off and reset. these interfaces are device specific so it should be implemented to machine code at this time, we should create new structure for registering these functions as callbacks and also a header file for that structure and finally registered callback functions would be called by lcd panel driver. such header file(including new structure for lcd panel) would be added for all the lcd panel drivers. If anyone provides common structure for registering such callback functions then we could reduce unnecessary header files for lcd panel. I thought that suitable anyone could be include/linux/lcd.h so a new lcd_platform_data structure was added there. [akpm@linux-foundation.org: coding-style fixes] [randy.dunlap@oracle.com: fix s6e63m0 kconfig] [randy.dunlap@oracle.com: fix device attribute functions return types] Signed-off-by: InKi Dae <inki.dae@samsung.com> Reviewed-by: KyungMin Park <kyungmin.park.samsung.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-26backlight: adp8860: add support for ADP8861 & ADP8863Michael Hennerich2-20/+44
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-26backlight: mbp_nvidia_bl - Fix DMI_SYS_VENDOR for MacBook1,1Steffen Röcker1-1/+1
Fix DMI_SYS_VENDOR for MacBook1,1. When the MacBook1,1 came out Apple was still named Apple Computer, I am not sure if this applies to older MacBook2,1 versions aswell. Signed-off-by: Steffen Röcker <sroecker@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 04:01:28 +0300