summaryrefslogtreecommitdiff
path: root/drivers/video/fbmem.c
AgeCommit message (Collapse)AuthorFilesLines
2014-01-30Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-10/+21
Pull drm updates from Dave Airlie: "Been a bit busy, first week of kids school, and waiting on other trees to go in before I could send this, so its a bit later than I'd normally like. Highlights: - core: timestamp fixes, lots of misc cleanups - new drivers: bochs virtual vga - vmwgfx: major overhaul for their nextgen virt gpu. - i915: runtime D3 on HSW, watermark fixes, power well work, fbc fixes, bdw is no longer prelim. - nouveau: gk110/208 acceleration, more pm groundwork, old overlay support - radeon: dpm rework and clockgating for CIK, pci config reset, big endian fixes - tegra: panel support and DSI support, build as module, prime. - armada, omap, gma500, rcar, exynos, mgag200, cirrus, ast: fixes - msm: hdmi support for mdp5" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (595 commits) drm/nouveau: resume display if any later suspend bits fail drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip drm/nouveau: implement hooks for needed for drm vblank timestamping support drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping drm/nv50: fill in crtc mode struct members from crtc_mode_fixup drm/radeon/dce8: workaround for atom BlankCrtc table drm/radeon/DCE4+: clear bios scratch dpms bit (v2) drm/radeon: set si_notify_smc_display_change properly drm/radeon: fix DAC interrupt handling on DCE5+ drm/radeon: clean up active vram sizing drm/radeon: skip async dma init on r6xx drm/radeon/runpm: don't runtime suspend non-PX cards drm/radeon: add ring to fence trace functions drm/radeon: add missing trace point drm/radeon: fix VMID use tracking drm: ast,cirrus,mgag200: use drm_can_sleep drm/gma500: Lock struct_mutex around cursor updates drm/i915: Fix the offset issue for the stolen GEM objects DRM: armada: fix missing DRM_KMS_FB_HELPER select drm/i915: Decouple GPU error reporting from ring initialisation ...
2014-01-17fbmem: really support wildcard video=options for all fbdev driversOlaf Hering1-0/+3
Documentation/fb/modedb.txt states that video=option should be considered a global option. But video_setup and fb_get_options are not coded that way. Instead its required to boot with video=driver:option to set a given option in drvier. This is cumbersome because it requires to know in advance which driver will be active for a given board/kernel. The following patch implements the documented catchall for the fbdev drivers. It is now possible to boot with video=XxY without the need to know the active driver in advance. The specific case it tries to fix is syslinux in the SUSE installer which offers a menu to set a display resolution. Right now this just appends the vga= option the kernel. But in addition to vga= it should be possible to pass a generic video=XxY for all framebuffer/drm drivers. With this change forcing a certain window size of VM displays is now much easier. Today the video= option is stored in a global fb_mode_option. But unfortunately only drm uses it. Note: this change introduces a small memleak if video=option is actually used because fb_mode_option is const. Most drivers use strsep to get to individual options. This could be fixed in a followup patch which always releases the option string in every caller of fb_get_options. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-12-18video/fb: Propagate error code from failing to unregister conflicting fbChris Wilson1-10/+21
If we fail to remove a conflicting fb driver, we need to abort the loading of the second driver to avoid likely kernel panics. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-11fb: reorder the lock sequence to fix potential dead lockGu Zheng1-18/+32
Following commits: 50e244cc79 fb: rework locking to fix lock ordering on takeover e93a9a8687 fb: Yet another band-aid for fixing lockdep mess 054430e773 fbcon: fix locking harder reworked locking to fix related lock ordering on takeover, and introduced console_lock into fbmem, but it seems that the new lock sequence(fb_info->lock ---> console_lock) is against with the one in console_callback(console_lock ---> fb_info->lock), and leads to a potential dead lock as following: [ 601.079000] ====================================================== [ 601.079000] [ INFO: possible circular locking dependency detected ] [ 601.079000] 3.11.0 #189 Not tainted [ 601.079000] ------------------------------------------------------- [ 601.079000] kworker/0:3/619 is trying to acquire lock: [ 601.079000] (&fb_info->lock){+.+.+.}, at: [<ffffffff81397566>] lock_fb_info+0x26/0x60 [ 601.079000] but task is already holding lock: [ 601.079000] (console_lock){+.+.+.}, at: [<ffffffff8141aae3>] console_callback+0x13/0x160 [ 601.079000] which lock already depends on the new lock. [ 601.079000] the existing dependency chain (in reverse order) is: [ 601.079000] -> #1 (console_lock){+.+.+.}: [ 601.079000] [<ffffffff810dc971>] lock_acquire+0xa1/0x140 [ 601.079000] [<ffffffff810c6267>] console_lock+0x77/0x80 [ 601.079000] [<ffffffff81399448>] register_framebuffer+0x1d8/0x320 [ 601.079000] [<ffffffff81cfb4c8>] efifb_probe+0x408/0x48f [ 601.079000] [<ffffffff8144a963>] platform_drv_probe+0x43/0x80 [ 601.079000] [<ffffffff8144853b>] driver_probe_device+0x8b/0x390 [ 601.079000] [<ffffffff814488eb>] __driver_attach+0xab/0xb0 [ 601.079000] [<ffffffff814463bd>] bus_for_each_dev+0x5d/0xa0 [ 601.079000] [<ffffffff81447e6e>] driver_attach+0x1e/0x20 [ 601.079000] [<ffffffff81447a07>] bus_add_driver+0x117/0x290 [ 601.079000] [<ffffffff81448fea>] driver_register+0x7a/0x170 [ 601.079000] [<ffffffff8144a10a>] __platform_driver_register+0x4a/0x50 [ 601.079000] [<ffffffff8144a12d>] platform_driver_probe+0x1d/0xb0 [ 601.079000] [<ffffffff81cfb0a1>] efifb_init+0x273/0x292 [ 601.079000] [<ffffffff81002132>] do_one_initcall+0x102/0x1c0 [ 601.079000] [<ffffffff81cb80a6>] kernel_init_freeable+0x15d/0x1ef [ 601.079000] [<ffffffff8166d2de>] kernel_init+0xe/0xf0 [ 601.079000] [<ffffffff816914ec>] ret_from_fork+0x7c/0xb0 [ 601.079000] -> #0 (&fb_info->lock){+.+.+.}: [ 601.079000] [<ffffffff810dc1d8>] __lock_acquire+0x1e18/0x1f10 [ 601.079000] [<ffffffff810dc971>] lock_acquire+0xa1/0x140 [ 601.079000] [<ffffffff816835ca>] mutex_lock_nested+0x7a/0x3b0 [ 601.079000] [<ffffffff81397566>] lock_fb_info+0x26/0x60 [ 601.079000] [<ffffffff813a4aeb>] fbcon_blank+0x29b/0x2e0 [ 601.079000] [<ffffffff81418658>] do_blank_screen+0x1d8/0x280 [ 601.079000] [<ffffffff8141ab34>] console_callback+0x64/0x160 [ 601.079000] [<ffffffff8108d855>] process_one_work+0x1f5/0x540 [ 601.079000] [<ffffffff8108e04c>] worker_thread+0x11c/0x370 [ 601.079000] [<ffffffff81095fbd>] kthread+0xed/0x100 [ 601.079000] [<ffffffff816914ec>] ret_from_fork+0x7c/0xb0 [ 601.079000] other info that might help us debug this: [ 601.079000] Possible unsafe locking scenario: [ 601.079000] CPU0 CPU1 [ 601.079000] ---- ---- [ 601.079000] lock(console_lock); [ 601.079000] lock(&fb_info->lock); [ 601.079000] lock(console_lock); [ 601.079000] lock(&fb_info->lock); [ 601.079000] *** DEADLOCK *** so we reorder the lock sequence the same as it in console_callback() to avoid this issue. And following Tomi's suggestion, fix these similar issues all in fb subsystem. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-08-30fbmem: move EXPORT_SYMBOL annotation next to symbol declarationsDaniel Mack1-16/+13
Just a cosmetic thing to bring that file in line with others in the tree. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-28Merge tag 'fbdev-3.11-2' of git://gitorious.org/linux-omap-dss2/linux into ↵Jean-Christophe PLAGNIOL-VILLARD1-1/+3
fbdev/for-next Various fbdev changes for 3.11 * xilinxfb updates * Small cleanups and fixes to multiple drivers
2013-06-27fb: make fp_get_options name argument constVincent Stehlé1-1/+1
drm_get_connector_name now returns a const value, which causes the following compilation warning: drivers/gpu/drm/drm_fb_helper.c: In function ‘drm_fb_helper_parse_command_line’: drivers/gpu/drm/drm_fb_helper.c:127:3: warning: passing argument 1 of ‘fb_get_options’ discards ‘const’ qualifier from pointer target type [enabled by default] In file included from drivers/gpu/drm/drm_fb_helper.c:35:0: include/linux/fb.h:627:12: note: expected ‘char *’ but argument is of type ‘const char *’ As fb_get_options uses its name argument as read only, make it const. This fixes the aforementioned compilation warning. Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Dave Airlie <airlied@redhat.com> Cc: trivial@kernel.org Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-06-26fbmem: return -EFAULT on copy_to_user() failureDan Carpenter1-1/+3
copy_to_user() returns the number of bytes remaining to be copied. put_user() returns -EFAULT on error. This function ORs a bunch of stuff together and returns jumbled non-zero values on error. It should return -EFAULT. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-05-03Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-0/+7
Pull drm updates from Dave Airlie: "This is the main drm pull request for 3.10. Wierd bits: - OMAP drm changes required OMAP dss changes, in drivers/video, so I took them in here. - one more fbcon fix for font handover - VT switch avoidance in pm code - scatterlist helpers for gpu drivers - have acks from akpm Highlights: - qxl kms driver - driver for the spice qxl virtual GPU Nouveau: - fermi/kepler VRAM compression - GK110/nvf0 modesetting support. Tegra: - host1x core merged with 2D engine support i915: - vt switchless resume - more valleyview support - vblank fixes - modesetting pipe config rework radeon: - UVD engine support - SI chip tiling support - GPU registers initialisation from golden values. exynos: - device tree changes - fimc block support Otherwise: - bunches of fixes all over the place." * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (513 commits) qxl: update to new idr interfaces. drm/nouveau: fix build with nv50->nvc0 drm/radeon: fix handling of v6 power tables drm/radeon: clarify family checks in pm table parsing drm/radeon: consolidate UVD clock programming drm/radeon: fix UPLL_REF_DIV_MASK definition radeon: add bo tracking debugfs drm/radeon: add new richland pci ids drm/radeon: add some new SI PCI ids drm/radeon: fix scratch reg handling for UVD fence drm/radeon: allocate SA bo in the requested domain drm/radeon: fix possible segfault when parsing pm tables drm/radeon: fix endian bugs in atom_allocate_fb_scratch() OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found OMAPDSS: VENC: Add error handling for venc_probe_pdata OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata OMAPDSS: RFBI: Add error handling for rfbi_probe_pdata OMAPDSS: DSI: Add error handling for dsi_probe_pdata OMAPDSS: SDI: Add error handling for sdi_probe_pdata OMAPDSS: DPI: Add error handling for dpi_probe_pdata ...
2013-04-26fbdev: fix check for fb_mmap's mmio availabilityTomi Valkeinen1-0/+5
Commit fc9bbca8f650e5f738af8806317c0a041a48ae4a (vm: convert fb_mmap to vm_iomap_memory() helper) made fbmem.c use vm_iomap_memory, but also accidentally removed the check for mmio's availability. Add the check back. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-04-19vm: convert fb_mmap to vm_iomap_memory() helperLinus Torvalds1-25/+14
This is my example conversion of a few existing mmap users. The fb_mmap() case is a good example because it is a bit more complicated than some: fb_mmap() mmaps one of two different memory areas depending on the page offset of the mmap (but happily there is never any mixing of the two, so the helper function still works). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-19Merge tag 'v3.9-rc3' into drm-intel-next-queuedDaniel Vetter1-1/+1
Backmerge so that I can merge Imre Deak's coalesced sg entries fixes, which depend upon the new for_each_sg_page introduce in commit a321e91b6d73ed011ffceed384c40d2785cf723b Author: Imre Deak <imre.deak@intel.com> Date: Wed Feb 27 17:02:56 2013 -0800 lib/scatterlist: add simple page iterator The merge itself is just two trivial conflicts: Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-27Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-23new helper: file_inode(file)Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-20fb: add support for drivers not needing VT switch at suspend/resume timeJesse Barnes1-0/+7
Use the new PM routines to indicate whether we need to VT switch at suspend and resume time. When a new driver is bound, set its flag accordingly, and when unbound, remove it from the PM's console tracking list. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-08fbcon: fix locking harderDave Airlie1-0/+2
Okay so Alan's patch handled the case where there was no registered fbcon, however the other path entered in set_con2fb_map pit. In there we called fbcon_takeover, but we also took the console lock in a couple of places. So push the console lock out to the callers of set_con2fb_map, this means fbmem and switcheroo needed to take the lock around the fb notifier entry points that lead to this. This should fix the efifb regression seen by Maarten. Tested-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Tested-by: Lu Hua <huax.lu@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-08fb: Yet another band-aid for fixing lockdep messTakashi Iwai1-0/+4
I've still got lockdep warnings even after Alan's patch, and it seems that yet more band aids are required to paper over similar paths for unbind_con_driver() and unregister_con_driver(). After this hack, lockdep warnings are finally gone. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Alan Cox <alan@linux.intel.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: stable <stable@vger.kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-08fb: rework locking to fix lock ordering on takeoverAlan Cox1-3/+2
Adjust the console layer to allow a take over call where the caller already holds the locks. Make the fb layer lock in order. This is partly a band aid, the fb layer is terminally confused about the locking rules it uses for its notifiers it seems. [akpm@linux-foundation.org: remove stray non-ascii char, tidy comment] [akpm@linux-foundation.org: export do_take_over_console()] [airlied: cleanup another non-ascii char] Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Jiri Kosina <jkosina@suse.cz> Cc: stable <stable@vger.kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-09mm: kill vma flag VM_RESERVED and mm->reserved_vm counterKonstantin Khlebnikov1-2/+1
A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA, currently it lost original meaning but still has some effects: | effect | alternative flags -+------------------------+--------------------------------------------- 1| account as reserved_vm | VM_IO 2| skip in core dump | VM_IO, VM_DONTDUMP 3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP 4| do not mlock | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP This patch removes reserved_vm counter from mm_struct. Seems like nobody cares about it, it does not exported into userspace directly, it only reduces total_vm showed in proc. Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP. remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP. remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP. [akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30fbdev: add events for early fb event supportInki Dae1-6/+15
Add FB_EARLY_EVENT_BLANK and FB_R_EARLY_EVENT_BLANK event mode supports. first, fb_notifier_call_chain() is called with FB_EARLY_EVENT_BLANK and fb_blank() of specific fb driver is called and then fb_notifier_call_chain() is called with FB_EVENT_BLANK again at fb_blank(). and if fb_blank() was failed then fb_nitifier_call_chain() would be called with FB_R_EARLY_EVENT_BLANK to revert the previous effects. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-15udlfb: remove sysfs framebuffer device with USB .disconnect()Kay Sievers1-1/+17
The USB graphics card driver delays the unregistering of the framebuffer device to a workqueue, which breaks the userspace visible remove uevent sequence. Recent userspace tools started to support USB graphics card hotplug out-of-the-box and rely on proper events sent by the kernel. The framebuffer device is a direct child of the USB interface which is removed immediately after the USB .disconnect() callback. But the fb device in /sys stays around until its final cleanup, at a time where all the parent devices have been removed already. To work around that, we remove the sysfs fb device directly in the USB .disconnect() callback and leave only the cleanup of the internal fb data to the delayed work. Before: add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb) add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb) add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb0 (graphics) remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb) remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb) remove /2-1.2:1.0/graphics/fb0 (graphics) After: add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb) add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb) add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics) remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics) remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb) remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb) Cc: stable@vger.kernel.org Tested-by: Bernie Thompson <bernie@plugable.com> Acked-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-12-20fbdev: Add FOURCC-based format configuration APILaurent Pinchart1-0/+14
This API will be used to support YUV frame buffer formats in a standard way. Last but not least, create a much needed fbdev API documentation and document the format setting APIs. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-09-02fb: avoid possible deadlock caused by fb_set_suspendHerton Ronaldo Krzesinski1-3/+0
A lock ordering issue can cause deadlocks: in framebuffer/console code, all needed struct fb_info locks are taken before acquire_console_sem(), in places which need to take console semaphore. But fb_set_suspend is always called with console semaphore held, and inside it we call lock_fb_info which gets the fb_info lock, inverse locking order of what the rest of the code does. This causes a real deadlock issue, when we write to state fb sysfs attribute (which calls fb_set_suspend) while a framebuffer is being unregistered by remove_conflicting_framebuffers, as can be shown by following show blocked state trace on a test program which loads i915 and runs another forked processes writing to state attribute: Test process with semaphore held and trying to get fb_info lock: .. fb-test2 D 0000000000000000 0 237 228 0x00000000 ffff8800774f3d68 0000000000000082 00000000000135c0 00000000000135c0 ffff880000000000 ffff8800774f3fd8 ffff8800774f3fd8 ffff880076ee4530 00000000000135c0 ffff8800774f3fd8 ffff8800774f2000 00000000000135c0 Call Trace: [<ffffffff8141287a>] __mutex_lock_slowpath+0x11a/0x1e0 [<ffffffff814142f2>] ? _raw_spin_lock_irq+0x22/0x40 [<ffffffff814123d3>] mutex_lock+0x23/0x50 [<ffffffff8125dfc5>] lock_fb_info+0x25/0x60 [<ffffffff8125e3f0>] fb_set_suspend+0x20/0x80 [<ffffffff81263e2f>] store_fbstate+0x4f/0x70 [<ffffffff812e7f70>] dev_attr_store+0x20/0x30 [<ffffffff811c46b4>] sysfs_write_file+0xd4/0x160 [<ffffffff81155a26>] vfs_write+0xc6/0x190 [<ffffffff81155d51>] sys_write+0x51/0x90 [<ffffffff8100c012>] system_call_fastpath+0x16/0x1b .. modprobe process stalled because has the fb_info lock (got inside unregister_framebuffer) but waiting for the semaphore held by the test process which is waiting to get the fb_info lock: .. modprobe D 0000000000000000 0 230 218 0x00000000 ffff880077a4d618 0000000000000082 0000000000000001 0000000000000001 ffff880000000000 ffff880077a4dfd8 ffff880077a4dfd8 ffff8800775a2e20 00000000000135c0 ffff880077a4dfd8 ffff880077a4c000 00000000000135c0 Call Trace: [<ffffffff81411fe5>] schedule_timeout+0x215/0x310 [<ffffffff81058051>] ? get_parent_ip+0x11/0x50 [<ffffffff814130dd>] __down+0x6d/0xb0 [<ffffffff81089f71>] down+0x41/0x50 [<ffffffff810629ac>] acquire_console_sem+0x2c/0x50 [<ffffffff812ca53d>] unbind_con_driver+0xad/0x2d0 [<ffffffff8126f5f7>] fbcon_event_notify+0x457/0x890 [<ffffffff814144ff>] ? _raw_spin_unlock_irqrestore+0x1f/0x50 [<ffffffff81058051>] ? get_parent_ip+0x11/0x50 [<ffffffff8141836d>] notifier_call_chain+0x4d/0x70 [<ffffffff8108a3b8>] __blocking_notifier_call_chain+0x58/0x80 [<ffffffff8108a3f6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff8125dabb>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff8125e6ac>] unregister_framebuffer+0x7c/0x130 [<ffffffff8125e8b3>] remove_conflicting_framebuffers+0x153/0x180 [<ffffffff8125eef3>] register_framebuffer+0x93/0x2c0 [<ffffffffa0331112>] drm_fb_helper_single_fb_probe+0x252/0x2f0 [drm_kms_helper] [<ffffffffa03314a3>] drm_fb_helper_initial_config+0x2f3/0x6d0 [drm_kms_helper] [<ffffffffa03318dd>] ? drm_fb_helper_single_add_all_connectors+0x5d/0x1c0 [drm_kms_helper] [<ffffffffa037b588>] intel_fbdev_init+0xa8/0x160 [i915] [<ffffffffa0343d74>] i915_driver_load+0x854/0x12b0 [i915] [<ffffffffa02f0e7e>] drm_get_pci_dev+0x19e/0x360 [drm] [<ffffffff8141821d>] ? sub_preempt_count+0x9d/0xd0 [<ffffffffa0386f91>] i915_pci_probe+0x15/0x17 [i915] [<ffffffff8124481f>] local_pci_probe+0x5f/0xd0 [<ffffffff81244f89>] pci_device_probe+0x119/0x120 [<ffffffff812eccaa>] ? driver_sysfs_add+0x7a/0xb0 [<ffffffff812ed003>] driver_probe_device+0xa3/0x290 [<ffffffff812ed1f0>] ? __driver_attach+0x0/0xb0 [<ffffffff812ed29b>] __driver_attach+0xab/0xb0 [<ffffffff812ed1f0>] ? __driver_attach+0x0/0xb0 [<ffffffff812ebd3e>] bus_for_each_dev+0x5e/0x90 [<ffffffff812ecc2e>] driver_attach+0x1e/0x20 [<ffffffff812ec6f2>] bus_add_driver+0xe2/0x320 [<ffffffffa03aa000>] ? i915_init+0x0/0x96 [i915] [<ffffffff812ed536>] driver_register+0x76/0x140 [<ffffffffa03aa000>] ? i915_init+0x0/0x96 [i915] [<ffffffff81245216>] __pci_register_driver+0x56/0xd0 [<ffffffffa02f1264>] drm_pci_init+0xe4/0xf0 [drm] [<ffffffffa03aa000>] ? i915_init+0x0/0x96 [i915] [<ffffffffa02e84a8>] drm_init+0x58/0x70 [drm] [<ffffffffa03aa094>] i915_init+0x94/0x96 [i915] [<ffffffff81002194>] do_one_initcall+0x44/0x190 [<ffffffff810a066b>] sys_init_module+0xcb/0x210 [<ffffffff8100c012>] system_call_fastpath+0x16/0x1b .. fb-test2 which reproduces above is available on kernel.org bug #26232. To solve this issue, avoid calling lock_fb_info inside fb_set_suspend, and move it out to where needed (callers of fb_set_suspend must call lock_fb_info before if needed). So far, the only place which needs to call lock_fb_info is store_fbstate, all other places which calls fb_set_suspend are suspend/resume hooks that should not need the lock as they should be run only when processes are already frozen in suspend/resume. References: https://bugzilla.kernel.org/show_bug.cgi?id=26232 Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: stable@kernel.org
2011-05-14Further fbcon sanity checkingBruno Prémont1-4/+4
This moves the if (num_registered_fb == FB_MAX) return -ENXIO; check _AFTER_ the call to do_remove_conflicting_framebuffers() as this would (now in a safe way) allow a native driver to replace the conflicting one even if all slots in registered_fb[] are taken. This also prevents unregistering a framebuffer that is no longer registered (vga16f will unregister at module unload time even if the frame buffer had been unregistered earlier due to being found conflicting). Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-14fbmem: fix remove_conflicting_framebuffers racesLinus Torvalds1-49/+68
When a register_framebuffer() call results in us removing old conflicting framebuffers, the new registration_lock doesn't protect that situation. And we can't just add the same locking to the function, because these functions call each other: register_framebuffer() calls remove_conflicting_framebuffers, which in turn calls unregister_framebuffer for any conflicting entry. In order to fix it, this just creates wrapper functions around all three functions and makes the versions that actually do the work be called "do_xxx()", leaving just the wrapper that gets the lock and calls the worker function. So the rule becomes simply that "do_xxxx()" has to be called with the lock held, and now do_register_framebuffer() can just call do_remove_conflicting_framebuffers(), and that in turn can call _do_unregister_framebuffer(), and there is no deadlock, and we can hold the registration lock over the whole sequence, fixing the races. It also makes error cases simpler, and fixes one situation where we would return from unregister_framebuffer() without releasing the lock, pointed out by Bruno Prémont. Tested-by: Bruno Prémont <bonbons@linux-vserver.org> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-12fbmem: make read/write/ioctl use the frame buffer at open timeLinus Torvalds1-16/+34
read/write/ioctl on a fbcon file descriptor has traditionally used the fbcon not when it was opened, but as it was at the time of the call. That makes no sense, but the lack of sense is much more obvious now that we properly ref-count the usage - it means that the ref-counting doesn't actually protect operations we do on the frame buffer. This changes it to look at the fb_info that we got at open time, but in order to avoid using a frame buffer long after it has been unregistered, we do verify that it is still current, and return -ENODEV if not. Acked-by: Tim Gardner <tim.gardner@canonical.com> Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Cc: Bruno Prémont <bonbons@linux-vserver.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-12fbcon: add lifetime refcount to opened frame buffersLinus Torvalds1-10/+46
This just adds the refcount and the new registration lock logic. It does not (for example) actually change the read/write/ioctl routines to actually use the frame buffer that was opened: those function still end up alway susing whatever the current frame buffer is at the time of the call. Without this, if something holds the frame buffer open over a framebuffer switch, the close() operation after the switch will access a fb_info that has been free'd by the unregistering of the old frame buffer. (The read/write/ioctl operations will normally not cause problems, because they will - illogically - pick up the new fbcon instead. But a switch that happens just as one of those is going on might see problems too, the window is just much smaller: one individual op rather than the whole open-close sequence.) This use-after-free is apparently fairly easily triggered by the Ubuntu 11.04 boot sequence. Acked-by: Tim Gardner <tim.gardner@canonical.com> Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Cc: Bruno Prémont <bonbons@linux-vserver.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-06fb: Reduce priority of resource conflict messageMatthew Garrett1-1/+1
It's expected that efifb will conflict with a native driver, so the handover message should be informational rather than an error. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-26console: rename acquire/release_console_sem() to console_lock/unlock()Torben Hohn1-6/+6
The -rt patches change the console_semaphore to console_mutex. As a result, a quite large chunk of the patches changes all acquire/release_console_sem() to acquire/release_console_mutex() This commit makes things use more neutral function names which dont make implications about the underlying lock. The only real change is the return value of console_trylock which is inverted from try_acquire_console_sem() This patch also paves the way to switching console_sem from a semaphore to a mutex. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make console_trylock return 1 on success, per Geert] Signed-off-by: Torben Hohn <torbenh@gmx.de> Cc: Thomas Gleixner <tglx@tglx.de> Cc: Greg KH <gregkh@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-24fb: fix overlapping test off-by-one.Dave Airlie1-1/+1
On my system with a radeon x2, the first GPU was not overlapping vesa but the test decided it was. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-28fbmem: fix fb_read, fb_write unaligned accessesJames Hogan1-32/+14
fb_{read,write} access the framebuffer using lots of fb_{read,write}l's but don't check that the file position is aligned which can cause problems on some architectures which do not support unaligned accesses. Since the operations are essentially memcpy_{from,to}io, new fb_memcpy_{from,to}fb macros have been defined and these are used instead. For Sparc, fb_{read,write} macros use sbus_{read,write}, so this defines new sbus_memcpy_{from,to}io functions the same as memcpy_{from,to}io but using sbus_{read,write}b instead of {read,write}b. Signed-off-by: James Hogan <james@albanarts.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28fbmem: fix whitespaceJames Hogan1-7/+7
Change a few lines of indentation to tabs. Signed-off-by: James Hogan <james@albanarts.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann1-0/+1
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-11fbmem: VM_IO set, but not propagatedDaniel De Graaf1-0/+1
When we setup up the VMA flags for the mmap flag and we end up using the fallback mmap functionality we set the vma->vm_flags |= VM_IO. However we neglect to propagate the flag to the vma->vm_page_prot. This bug was found when Linux kernel was running under Xen. In that scenario, any page that has VM_IO flag to it, means that it MUST be a MMIO/VRAM backend memory , _not_ System RAM. That is what the fbmem.c does: sets VM_IO, ioremaps the region - everything is peachy. Well, not exactly. The vm_page_prot does not get the relevant PTE flags set (_PAGE_IOMAP) which under Xen is a death-kneel to pages that are referencing real physical devices but don't have that flag set. This patch fixes this. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Tested-by: Eamon Walsh <ewalsh@tycho.nsa.gov> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11drivers/video/fbmem.c: simplify strlen()==0 check in fb_get_options()Denys Vlasenko1-3/+2
Replaced !strlen(str) check with !str[0]. Removed the variable which was used solely to store strlen result. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-22fbmem: avoid printk format warning with 32-bit resourcesRandy Dunlap1-1/+4
Fix printk formats: drivers/video/fbmem.c: In function 'fb_do_apertures_overlap': drivers/video/fbmem.c:1494: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'resource_size_t' drivers/video/fbmem.c:1494: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'resource_size_t' drivers/video/fbmem.c:1494: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t' drivers/video/fbmem.c:1494: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'resource_size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-18vga16fb, drm: vga16fb->drm handoffMarcin Slusarz1-3/+11
let vga16fb claim 0xA0000+0x10000 region as its aperture; drm drivers don't use it, so we have to detect it and kick vga16fb manually - but only if drm is driving the primary card Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18fbmem, drm/nouveau: kick firmware framebuffers as soon as possibleMarcin Slusarz1-18/+25
Currently vesafb/efifb/... is kicked when hardware driver is registering framebuffer. To do it hardware must be fully functional, so there's a short window between start of initialisation and framebuffer registration when two drivers touch the hardware. Unfortunately sometimes it breaks nouveau initialisation. Fix it by kicking firmware driver(s) before we start touching the hardware. Reported-by: Didier Spaier <didier.spaier@epsm.fr> Tested-by: Didier Spaier <didier.spaier@epsm.fr> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Peter Jones <pjones@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18fbdev: allow passing more than one aperture for handoffMarcin Slusarz1-3/+26
It removes a hack from nouveau code which had to detect which region to pass to kick vesafb/efifb. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Peter Jones <pjones@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-25fb: for framebuffer handover don't exit the loop early.Dave Airlie1-1/+0
An offb machine has been seen in the fields which adds two offb nodes, so continue scanning the list after removing one. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-30Merge branch 'drm-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (25 commits) drm/radeon/kms: Convert R520 to new init path and associated cleanup drm/radeon/kms: Convert RV515 to new init path and associated cleanup drm: fix radeon DRM warnings when !CONFIG_DEBUG_FS drm: fix drm_fb_helper warning when !CONFIG_MAGIC_SYSRQ drm/r600: fix memory leak introduced with 64k malloc avoidance fix. drm/kms: make fb helper work for all drivers. drm/radeon/r600: fix offset handling in CS parser drm/radeon/kms/r600: fix forcing pci mode on agp cards drm/radeon/kms: fix for the extra pages copying. drm/radeon/kms/r600: add support for vline relocs drm/radeon/kms: fix some bugs in vline reloc drm/radeon/kms/r600: clamp vram to aperture size drm/kms: protect against fb helper not being created. drm/r600: get values from the passed in IB not the copy. drm: create gitignore file for radeon drm/radeon/kms: remove unneeded master create/destroy functions. drm/kms: start adding command line interface using fb. fb: change rules for global rules match. drm/radeon/kms: don't require up to 64k allocations. (v2) drm/radeon/kms: enable dac load detection by default. ... Trivial conflicts in drivers/gpu/drm/radeon/radeon_asic.h due to adding '->vga_set_state' function pointers.
2009-09-25fb: change rules for global rules match.Dave Airlie1-1/+1
Having a : should be enough 'fb:' isn't really useful if the fb wants to a kms output ID. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-23fb: do not ignore fb_set_par errorsFlorian Tobias Schandinat1-2/+13
At the moment about half of the framebuffer drivers can return an error code in fb_set_par. Until now it would be silently ignored by fbmem.c and fbcon.c. This patch fixes fbmem.c to return the error code and restore var on error. But it is not clear in which video mode the device is when fb_set_par fails. It would be good and reasonable if it were in the old state but there is no guarantee that this is true for all existing drivers. Additionally print a message if a failing fb_set_par is detected in fbmem.c or fbcon.c. Although most errors should be caught by the previous fb_check_var some errors can't as they are dynamic (memory allocations, ...) and can only be detected while performing the operations which is forbidden in fb_check_var. This patch shouldn't have a negative impact on normal operation as all drivers return 0 on success. The impact in case of error depends heavily on the driver and caller but it's expected to be better than before. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23fb: fix fb_pan_display range checkFlorian Tobias Schandinat1-2/+2
Fix the range check for panning. The current code fails to detect some invalid values (very high ones that can occur if an app tries to move further up/left than 0,0) as the check uses the unknown values for calculation so that an overflow can occur. To fix this it is sufficient to move the calculation to the right side to use only trusted values. Kai Jiang detected this problem and proposed an initial patch. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Kai Jiang <b18973@freescale.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan1-1/+0
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08Revert "fb: Initialize fb_info mutexes in framebuffer_alloc()"Linus Torvalds1-0/+2
This reverts commit 4148df9b0f38bdd362dd91d52076926c11cbe5a9. Let's hope that the mm_lock initialization is now correct with all drivers, following Krzysztof's patches. Requested-by: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-07fb: Initialize fb_info mutexes in framebuffer_alloc()Paul Mundt1-2/+0
This way they'll be properly initialized early enough for users that may touch them before the framebuffer has been registered. Drivers that allocate their fb_info structure some other way (like matrocfb's broken static allocation) need to be fixed up appropriately. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-01fbdev: add mutex for fb_mmap lockingKrzysztof Helt1-8/+5
Add a mutex to avoid a circular locking problem between the mm layer semaphore and fbdev ioctl mutex through the fb_mmap() call. Also, add mutex to all places where smem_start and smem_len fields change so the mutex inside the fb_mmap() is actually used. Changing of these fields before calling the framebuffer_register() are not mutexed. This is 2.6.31 material. It removes one lockdep (fb_mmap() and register_framebuffer()) but there is still another one (fb_release() and register_framebuffer()). It also cleans up handling of the smem_start and smem_len fields used by mutexed section of the fb_mmap(). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17fbdev: add support for handoff from firmware to hw framebuffersDave Airlie1-0/+31
With KMS we have ran into an issue where we really want the KMS fb driver to be the one running the console, so panics etc can be shown by switching out of X etc. However with vesafb/efifb built-in, we end up with those on fb0 and the KMS fb driver on fb1, driving the same piece of hw, so this adds an fb info flag to denote a firmware fbdev, and adds a new aperture base/size range which can be compared when the hw drivers are installed to see if there is a conflict with a firmware driver, and if there is the firmware driver is unregistered and the hw driver takes over. It uses new aperture_base/size members instead of comparing on the fix smem_start/length, as smem_start/length might for example only cover the first 1MB of the PCI aperture, and we could allocate the kms fb from 8MB into the aperture, thus they would never overlap. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dave Airlie <airlied@redhat.com> Acked-by: Peter Jones <pjones@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-14fbdev: fix info->lock deadlock in fbcon_event_notify()Andrea Righi1-0/+19
fb_notifier_call_chain() is called with info->lock held, i.e. in do_fb_ioctl() => FBIOPUT_VSCREENINFO => fb_set_var() and the some notifier callbacks, like fbcon_event_notify(), try to re-acquire info->lock again. Remove the lock/unlock_fb_info() in all the framebuffer notifier callbacks' and be sure to always call fb_notifier_call_chain() with info->lock held. Reported-by: Pavel Roskin <proski@gnu.org> Reported-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Andrea Righi <righi.andrea@gmail.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-01 13:51:46 +0300