summaryrefslogtreecommitdiff
path: root/drivers/video/fbdev/omap2
AgeCommit message (Collapse)AuthorFilesLines
2014-05-09OMAPDSS: DSI: Add OMAP5 DSI module IDsTomi Valkeinen1-0/+7
Add OMAP5 DSI module ID support to the OMAP DSI driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09OMAPDSS: DPI: fix LCD3 DSI sourceTomi Valkeinen1-0/+2
At the moment the dpi driver does not handle LCD3 clock source at all. LCD3 channel gets the DSI PLL clock from DSI2 instance. Add support for LCD3's clock source in the dpi driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09OMAPDSS: features: fix OMAP5 featuresTomi Valkeinen1-1/+2
OMAP5 has LCD3 overlay manager, and total 4 overlay managers. These are not correctly defined in the dss features. Fix them. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09OMAPDSS: DSS & DISPC DT support for OMAP5Tomi Valkeinen2-0/+2
Add omap5 entries to dispc's and dss's of_device_id tables. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09OMAPDSS: Add DSS features for AM43xxSathya Prakash M R5-0/+82
Add DSS features for AM43xx. Signed-off-by: Sathya Prakash M R <sathyap@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09OMAPDSS: remove venc_panel.cTomi Valkeinen1-232/+0
The use of venc_panel.c was removed in 09d2e7cdebd53b7572380a215008b334ff6321a5 (OMAPDSS: VENC: remove code related to old panel model), but the file itself was left behind. Remove the unused file. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09omapdss: remove check for simpler port/endpoint bindingArchit Taneja1-5/+1
The support for simpler port/endpoint binding was removed in the merged version of omapdss DT. But dss_init_ports still tries to get to an endpoint even if no port exists. Remove this as this doesn't work. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09OMAPDSS: add __exit to dss_uninit_portsFabian Frederick1-1/+1
dss_uninit_ports is only called by __exit omap_dsshw_remove Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-omap@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09video: omap2dss: fix LPAE warningsArnd Bergmann1-3/+3
If LPAE is enabled, dma_addr_t is 64 bit, so we have to change a few type for everything in this driver to match again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09omapdss: panel-tpo-td028ec1: Add module aliasMarek Belisko1-0/+1
Add module alias string to make it working when panel is compiled as module. Without this change panel module is not probed thus display is not working. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09omapdss: panel-tpo-td028ec1: Add DT support.Marek Belisko1-1/+31
Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07OMAPDSS: DSI: set regulator voltage to 1.8VTomi Valkeinen1-0/+10
Set the DSI vdd regulator voltage to the required 1.8V. This is required for the case when the regulator in the DT data defines a range of allowed voltages. In this case it's required to set the voltage, as otherwise enabling the voltage fails. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07OMAPDSS: HDMI4: set regulator voltage to 1.8VTomi Valkeinen1-0/+10
Set the HDMI vdda regulator voltage to the required 1.8V. This is required for the case when the regulator in the DT data defines a range of allowed voltages. In this case it's required to set the voltage, as otherwise enabling the voltage fails. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07OMAPDSS: HDMI: lane config supportTomi Valkeinen4-2/+167
Add support to configure the pins used for the HDMI lanes. The order and polarity of the lanes can be defined in the DT data. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07OMAPDSS: connector-hdmi: hpd supportTomi Valkeinen1-1/+24
Add support to handle HPD GPIO in the HDMI connector driver. For the time being, the driver only uses HPD GPIO to report is the cable is connected via detect() calll. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07OMAPDSS: panel-dpi: Add DT supportTomi Valkeinen1-1/+58
Add DT support for panel-dpi. We disable the use of the backlight_gpio as it should be handled via backlight framework with DT boots. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2014-05-07OMAPDSS: panel-dpi: use gpiod for enable gpioTomi Valkeinen1-13/+19
The new gpiod API supports automatic handling of active-high/active-low with DT. To make it possible to use that when booting with DT, change the panel-dpi's handling of the enable GPIO to use gpiod. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-17video: move fbdev to drivers/video/fbdevTomi Valkeinen59-0/+37355
The drivers/video directory is a mess. It contains generic video related files, directories for backlight, console, linux logo, lots of fbdev device drivers, fbdev framework files. Make some order into the chaos by creating drivers/video/fbdev directory, and move all fbdev related files there. No functionality is changed, although I guess it is possible that some subtle Makefile build order related issue could be created by this patch. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Clark <robdclark@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-13 01:00:44 +0300