summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2021-04-13USB: serial: xr: add copyright noticeJohan Hovold1-0/+1
Add another copyright notice for the work done in 2021. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: xr: reset FIFOs on openJohan Hovold1-0/+51
Reset the transmit and receive FIFOs before enabling the UARTs as part of open() in order to flush any stale data. Note that the XR21V141X needs a type-specific implementation due to its UART Manager registers. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: xr: add support for XR22801, XR22802, XR22804Johan Hovold1-0/+23
The XR22801, XR22802 and XR22804 are compound devices with an embedded hub and up to seven downstream USB devices including one, two or four UARTs respectively. The UART function is similar to XR21B142X but most registers are offset by 0x40, the register requests are different and are directed at the device rather than interface, and 5 and 6-bit words are not supported. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: xr: add support for XR21B1411Johan Hovold1-16/+48
The single-port XR21B1411 is similar to the XR21B142X type but uses 12-bit registers and 16-bit register addresses, the register requests are different and are directed at the device rather than interface, and 5 and 6-bit words are not supported. The register layout is very similar to XR21B142X except that most registers are offset by 0xc00 (corresponding to a channel index of 12 in the MSB of wIndex). As the device is single-port so that the derived channel index is 0, the current register accessors can be reused after simply changing the address width. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: xr: add support for XR21B1421, XR21B1422 and XR21B1424Johan Hovold1-76/+262
The XR21B1421, XR21B1422 and XR21B1424 are the one-, two- and four-port models of a second XR21B142X type of the Maxlinear/Exar USB UARTs. The XR21B142X type differs from XR21V141X in several ways, including: - register layout - register width (16-bit instead of 8-bit) - vendor register requests - UART enable/disable sequence - custom-driver mode flag - three additional GPIOs (9 instead of 6) As for XR21V141X, the XR21B142X vendor requests encode the channel index in the MSB of wIndex, but it lacks the UART Manager registers which have been replaced by regular UART registers. The new type also uses the interface number of the control interface (0, 2, 4, 6) as channel index instead of the channel number (0, 1, 2, 3). The XR21B142X lacks the divisor and format registers used by XR21V141X and instead uses the CDC SET_LINE_CONTROL request to configure the line settings. Note that the currently supported XR21V141X type lacks the custom-driver mode flag that prevents the device from entering CDC-ACM mode when a CDC requests is received. This specifically means that the SET_LINE_CONTROL request cannot be used with XR21V141X even though it is otherwise supported. The UART enable sequence for XR21B142X does not involve explicitly enabling the FIFOs, but according to datasheet the UART must be disabled when writing any register but GPIO_SET, GPIO_CLEAR, TX_BREAK and ERROR_STATUS. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: xr: add type abstractionJohan Hovold1-43/+85
There are at least four types of Maxlinear/Exar USB UARTs which differ in various ways such as in their register layouts: XR21V141X XR21B142X XR21B1411 XR22804 It is not clear whether the device type can be inferred from the descriptors so encode it in the device-id table for now. Add a type structure that can be used to abstract the register layout and other features, and use it when accessing the XR21V141X UART registers that are shared by all types. Note that the currently supported XR21V141X type is the only type that has a set of UART Manager registers and that these will need to be handled specifically. Similarly, XR21V141X is the only type which has the divisor registers and that needs to use the format register when configuring the line settings. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: xr: drop type prefix from shared definesJohan Hovold1-61/+61
In preparation for adding support for further types, drop the type prefix from defines that are not specific to XR21V141X. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: xr: move pin configuration to probeJohan Hovold1-8/+37
There's no need to configure the pins on every open and judging from the vendor driver and datasheet it can be done before enabling the UART. Move pin configuration from open() to port probe and make sure to deassert DTR and RTS after configuring all pins as GPIO. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: xr: rename GPIO-pin definesJohan Hovold1-17/+17
Rename the GPIO-pin defines so that they reflect how they are used. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: xr: rename GPIO-mode definesJohan Hovold1-7/+7
Rename the GPIO mode defines so that they reflect the datasheet and how they are used. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: xr: add support for XR21V1412 and XR21V1414Johan Hovold1-4/+51
Add support for the two- and four-port variants of XR21V1410. Use the interface number of each control interface (e.g. 0, 2, 4, 6) to derive the zero-based channel index: XR21V1410 0 XR21V1412 0, 1 XR21V1414 0, 1, 2, 3 Note that the UART registers reside in separate blocks per channel, while the UART Manager functionality is implemented using per-channel registers. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: ti_usb_3410_5052: clean up termios CSIZE handlingJohan Hovold1-8/+8
Remove the random white space from the CSIZE switch. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: ti_usb_3410_5052: use kernel types consistentlyJohan Hovold1-17/+17
Replace the remaining uses of user-space __XX types. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: ti_usb_3410_5052: add port-command helpersJohan Hovold1-50/+44
Add two port-command helpers to handle the UART module-id parameter instead of open coding. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: ti_usb_3410_5052: clean up vendor-request helpersJohan Hovold1-8/+7
Make the vendor-request helpers data parameters be void pointers and drop the caller casts. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: ti_usb_3410_5052: drop unnecessary packed attributesJohan Hovold1-4/+4
Drop unnecessary packed attributes from structures that don't need it. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: io_ti: drop unnecessary packed attributesJohan Hovold2-4/+4
Drop unnecessary packed attributes from structures that don't need it and use the __packed macro consistently. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: io_ti: use kernel types consistentlyJohan Hovold2-71/+71
Use kernel types consistently by replacing the remaining __uXX types. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: io_ti: add read-port-command helperJohan Hovold1-6/+9
Add a read-port-command helper analogous to the send-port-command helper to take care of the UART module id instead of open coding. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: io_ti: add send-port-command helperJohan Hovold1-28/+13
Add a send-port-command helper which takes care of determining the UART module id when sending commands instead of doing so at every call site. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: io_ti: clean up vendor-request helpersJohan Hovold1-7/+6
Clean up the vendor-request helpers by using kernel-types consistently and using void pointers for the data arguments, which allows removing a cast from one caller. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: ti_usb_3410_5052: drop drain delay for 3410Johan Hovold1-3/+14
Unlike the TUSB5052, the TUSB3410 has an LSR TEMT bit to tell if both the transmitter data and shift registers are empty. Make sure to check also the shift register on TUSB3410 when waiting for the transmit buffer to drain during close and drop the time-based one-char delay which is otherwise needed (e.g. 90 ms at 110 bps). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: ti_usb_3410_5052: reduce drain delay to one charJohan Hovold1-1/+5
The three-character drain delay was added by commit f1175daa5312 ("USB: ti_usb_3410_5052: kill custom closing_wait") when removing the custom closing-wait implementation, which used a fixed 20 ms poll period and drain delay. This was likely a bit too conservative as a one-character timeout (e.g. 33 ms at 300 bps) should be enough to compensate for the lack of a transmitter empty bit in the TUSB5052 line-status register. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: io_ti: document reason for drain delayJohan Hovold1-0/+4
Document that the device line-status register doesn't tell when the transmitter shift register has emptied and that this is why the one-character drain delay is needed. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: f81232: drop time-based drain delayJohan Hovold1-1/+0
The f81232 driver now waits for the transmit FIFO to drain during close so there is no need to keep the time-based drain delay, which would add up to two seconds on every close for low line speeds. Fixes: 98405f81036d ("USB: serial: f81232: add tx_empty function") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13usb: dwc2: Add exit clock gating before removing driverArtur Petrosyan1-0/+9
When dwc2 core is in clock gating mode loading driver again causes driver fail. Because in that mode registers are not accessible. Added a flow of exiting clock gating mode to avoid the driver reload failure. Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073731.3C81BA022E@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13usb: dwc2: Add clock gating exiting flow by system resumeArtur Petrosyan1-0/+22
If not hibernation nor partial power down are supported, port resume is done using the clock gating programming flow. Adds a new flow of exiting clock gating when PC is resumed. Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073723.BA0FEA022E@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13usb: dwc2: Add clock gating entering flow by system suspendArtur Petrosyan1-0/+9
If not hibernation nor partial power down are supported, clock gating is used to save power. Adds a new flow of entering clock gating when PC is suspended. Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073716.30C13A0094@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13usb: dwc2: Allow exit clock gating in urb enqueueArtur Petrosyan1-0/+8
When core is in clock gating state and an external hub is connected, upper layer sends URB enqueue request, which results in port reset issue. Added exit from clock gating state to avoid port reset issue and process upper layer request properly. Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073708.ADFC6A0094@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13usb: dwc2: Update exit clock gating when port is resumedArtur Petrosyan1-25/+4
Updates the implementation of exiting clock gating mode when core receives port resume. Instead of setting the required bit fields of the registers inline, called the "dwc2_host_exit_clock_gating()" function. Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073701.367E0A022E@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13usb: dwc2: Update enter clock gating when port is suspendedArtur Petrosyan1-15/+4
Updates the implementation of entering clock gating mode when core receives port suspend. Instead of setting the required bit fields of the registers inline, called the "dwc2_host_enter_clock_gating()" function. Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073653.9F493A0094@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13usb: dwc2: Add exit clock gating when port reset is assertedArtur Petrosyan1-0/+4
Adds clock gating exit flow when set port feature reset is received in suspended state. Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073646.27217A0094@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13usb: dwc2: Add exit clock gating from session request interruptArtur Petrosyan1-6/+13
Added clock gating exit flow from session request interrupt handler according programming guide. Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073638.921E8A0099@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13usb: dwc2: Add exit clock gating from wakeup interruptArtur Petrosyan1-11/+22
Added exit from clock gating mode when wakeup interrupt is detected. To exit from the clock gating in device mode "dwc2_gadget_exit_clock_gating()" function is used with rem_wakeup parameter 0. To exit clock gating in host mode "dwc2_host_exit_clock_gating()" with rem_wakeup parameter 1. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073630.EF2CEA0094@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13usb: dwc2: Allow entering clock gating from USB_SUSPEND interruptArtur Petrosyan1-3/+7
If core doesn't support hibernation or partial power down power saving options, power can still be saved using clock gating on all the clocks. - Added entering clock gating state from USB_SUSPEND interrupt. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073623.65355A022E@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13usb: dwc2: Add host clock gating support functionsArtur Petrosyan2-0/+91
Added host clock gating support functions according programming guide. Added function names: dwc2_host_enter_clock_gating() dwc2_host_exit_clock_gating() Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073615.B3E84A022E@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13usb: dwc2: Add device clock gating support functionsArtur Petrosyan2-2/+79
Added device clock gating support functions according programming guide. Moved "bus_suspended" flag to "dwc2_hsotg" struct because we need to set that flag while entering to clock gating in case when the driver is built in peripheral mode. Added function names: dwc2_gadget_enter_clock_gating() dwc2_gadget_exit_clock_gating() Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073607.F41E8A0094@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-12Merge tag 'usb-v5.13-rc1' of ↵Greg Kroah-Hartman11-43/+162
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: Several Cadence3 improvements are introduced in v5.13-rc1: - Add recovery during resume if the controller was lost power at system suspend - Reduce DMA memory footprint - Other small improvements * tag 'usb-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: cdnsp: Fixes issue with Configure Endpoint command usb: cdnsp: remove redundant initialization of variable ret usb: cdns3: delete repeated clear operations usb: cdns3: Optimize DMA request buffer allocation usb: cdns3: Use dma_pool_* api to alloc trb pool usb: cdns3: fix static checker warning. usb: cdns3: imx: mark cdns_imx_system_resume as __maybe_unused usb: cdns3: trace: delete the trace parameter for request->trb usb: cdns3: imx: add power lost support for system resume usb: cdns3: add power lost support for system resume
2021-04-12Revert "usb: Link the ports to the connectors they are attached to"Greg Kroah-Hartman1-3/+0
This reverts commit 63cd78617350dae99cc5fbd8f643b83ee819fe33 as it causes a build error: depmod: ERROR: Cycle detected: usbcore -> typec -> usbcore depmod: ERROR: Found 2 modules in dependency cycles! Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20210412213655.3776e15e@canb.auug.org.au Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-12usb: cdnsp: Fixes issue with Configure Endpoint commandPawel Laszczak2-5/+13
Patch adds flag EP_UNCONFIGURED to detect whether endpoint was unconfigured. This flag is set in cdnsp_reset_device after Reset Device command. Among others this command disables all non control endpoints. Flag is used in cdnsp_gadget_ep_disable to protect controller against invoking Configure Endpoint command on disabled endpoint. Lack of this protection in some cases caused that Configure Endpoint command completed with Context State Error code completion. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdnsp: remove redundant initialization of variable retColin Ian King1-1/+1
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: delete repeated clear operationsWang Qing1-1/+0
dma_alloc_coherent already zeroes out memory, so memset is not needed. Signed-off-by: Wang Qing <wangqing@vivo.com> Reviewed-by: Pawel Laszczak <pawell@cadence.com> Acked-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: Optimize DMA request buffer allocationSanket Parmar2-6/+25
dma_alloc_coherent() might fail on the platform with a small DMA region. To avoid such failure in cdns3_prepare_aligned_request_buf(), dma_alloc_coherent() is replaced with dma_alloc_noncoherent() to allocate aligned request buffer of dynamic length. Reported-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Sanket Parmar <sparmar@cadence.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: Use dma_pool_* api to alloc trb poolSanket Parmar2-23/+20
Allocation of DMA coherent memory in atomic context using dma_alloc_coherent() might fail on platforms with smaller DMA region. To fix it, dma_alloc_coherent() is replaced with dma_pool API to allocate a smaller chunk of DMA coherent memory for TRB rings. Reported-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Sanket Parmar <sparmar@cadence.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: fix static checker warning.Frank Li1-1/+1
The patch c450e48eb570: "usb: cdns3: add power lost support for system resume" from Feb 18, 2021, leads to the following static checker warning: drivers/usb/cdns3/core.c:551 cdns_resume() error: uninitialized symbol 'ret'. drivers/usb/cdns3/core.c 544 545 if (!role_changed) { 546 if (cdns->role == USB_ROLE_HOST) 547 ret = cdns_drd_host_on(cdns); 548 else if (cdns->role == USB_ROLE_DEVICE) 549 ret = cdns_drd_gadget_on(cdns); "ret" is uninitialized at else branch. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Frank Li <frank.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: imx: mark cdns_imx_system_resume as __maybe_unusedWei Yongjun1-1/+1
The function cdns_imx_system_resume() may have no callers depending on configuration, so it must be marked __maybe_unused to avoid harmless warning: drivers/usb/cdns3/cdns3-imx.c:378:12: warning: 'cdns_imx_system_resume' defined but not used [-Wunused-function] 378 | static int cdns_imx_system_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~ Fixes: 67982dfa59de ("usb: cdns3: imx: add power lost support for system resume") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: trace: delete the trace parameter for request->trbPeter Chen1-4/+1
It is not correct using %pa to print virtual address of request->trb, and it is hard to print its physical address due to the virtual address is zero before using. It could use index (start_trb/end_trb) to know the current trb position, so no matter virtual address or physical address for request-trb is not so meaningful. Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: imx: add power lost support for system resumeFrank Li1-0/+34
imx need special handle when controller lost power Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Frank Li <frank.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: add power lost support for system resumeFrank Li5-3/+68
If the controller lost its power during the system suspend, we need to do all initialiation operations. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Frank Li <frank.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12USB: serial: cp210x: add gpio-configuration debug printkJohan Hovold1-0/+6
Add a debug printk to dump the GPIO configuration stored in EEPROM during probe. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-21 06:37:25 +0300