summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2015-09-23USB: whiteheat: fix potential null-deref at probeJohan Hovold1-0/+31
Fix potential null-pointer dereference at probe by making sure that the required endpoints are present. The whiteheat driver assumes there are at least five pairs of bulk endpoints, of which the final pair is used for the "command port". An attempt to bind to an interface with fewer bulk endpoints would currently lead to an oops. Fixes CVE-2015-5257. Reported-by: Moein Ghasemzadeh <moein@istuary.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-22xhci: init command timeout timer earlier to avoid deleting it uninitializedMathias Nyman1-6/+5
Don't check if timer is running with a timer_pending() before deleting it with del_timer_sync(), this defies the whole point of the sync part and can cause a possible race. Instead we just want to make sure the timer is initialized early enough before we have a chance to delete it. Cc: <stable@vger.kernel.org> Reported-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-22xhci: change xhci 1.0 only restrictions to support xhci 1.1Mathias Nyman2-5/+5
Some changes between xhci 0.96 and xhci 1.0 specifications forced us to check the hci version in code, some of these checks were implemented as hci_version == 1.0, which will not work with new xhci 1.1 controllers. xhci 1.1 behaves similar to xhci 1.0 in these cases, so change these checks to hci_version >= 1.0 Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-22usb: xhci: exit early in xhci_setup_device() if we're halted or dyingRoger Quadros1-0/+3
During quick plug/removal of OTG adapter during dual-role testing it can happen that xhci_alloc_device() is called for the newly detected device after the DRD library has called xhci_stop to remove the HCD. If that is the case, just fail early to prevent the following warning. [ 154.732649] hub 4-0:1.0: USB hub found [ 154.742204] hub 4-0:1.0: 1 port detected [ 154.824458] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000 [ 154.854609] hub 4-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 154.944430] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 154.951009] xhci-hcd xhci-hcd.0.auto: xhci_setup_device [ 155.038191] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 155.043315] usb usb4: USB disconnect, device number 1 [ 155.055270] xhci-hcd xhci-hcd.0.auto: xhci_stop [ 155.060094] xhci-hcd xhci-hcd.0.auto: USB bus 4 deregistered [ 155.066576] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 155.071710] usb usb3: USB disconnect, device number 1 [ 155.077124] xhci-hcd xhci-hcd.0.auto: xhci_setup_device [ 155.082389] ------------[ cut here ]------------ [ 155.087690] WARNING: CPU: 0 PID: 72 at drivers/usb/host/xhci.c:3800 xhci_setup_device+0x410/0x484 [xhci_hcd]() [ 155.097861] Modules linked in: sd_mod usb_storage scsi_mod usb_f_ss_lb g_zero libcomposite ipv6 xhci_plat_hcd xhci_hcd usbcore dwc3 udc_core evdev ti_am335x_adc joydev kfifo_buf industrialio snd_soc_simple_cc [ 155.146734] CPU: 0 PID: 72 Comm: kworker/0:3 Tainted: G W 4.1.4-00834-gcd9380b-dirty #50 [ 155.156073] Hardware name: Generic AM43 (Flattened Device Tree) [ 155.162117] Workqueue: usb_hub_wq hub_event [usbcore] [ 155.167249] Backtrace: [ 155.169751] [<c0012af0>] (dump_backtrace) from [<c0012c8c>] (show_stack+0x18/0x1c) [ 155.177390] r6:c089d4a4 r5:ffffffff r4:00000000 r3:ee46c000 [ 155.183137] [<c0012c74>] (show_stack) from [<c05f7c14>] (dump_stack+0x84/0xd0) [ 155.190446] [<c05f7b90>] (dump_stack) from [<c00439ac>] (warn_slowpath_common+0x80/0xbc) [ 155.198605] r7:00000009 r6:00000ed8 r5:bf27eb70 r4:00000000 [ 155.204348] [<c004392c>] (warn_slowpath_common) from [<c0043a0c>] (warn_slowpath_null+0x24/0x2c) [ 155.213202] r8:ee49f000 r7:ee7c0004 r6:00000000 r5:ee7c0158 r4:ee7c0000 [ 155.220051] [<c00439e8>] (warn_slowpath_null) from [<bf27eb70>] (xhci_setup_device+0x410/0x484 [xhci_hcd]) [ 155.229816] [<bf27e760>] (xhci_setup_device [xhci_hcd]) from [<bf27ec10>] (xhci_address_device+0x14/0x18 [xhci_hcd]) [ 155.240415] r10:ee598200 r9:00000001 r8:00000002 r7:00000001 r6:00000003 r5:00000002 [ 155.248363] r4:ee49f000 [ 155.250978] [<bf27ebfc>] (xhci_address_device [xhci_hcd]) from [<bf20cb94>] (hub_port_init+0x1b8/0xa9c [usbcore]) [ 155.261403] [<bf20c9dc>] (hub_port_init [usbcore]) from [<bf2101e0>] (hub_event+0x738/0x1020 [usbcore]) [ 155.270874] r10:ee598200 r9:ee7c0000 r8:ee7c0038 r7:ee518800 r6:ee49f000 r5:00000001 [ 155.278822] r4:00000000 [ 155.281426] [<bf20faa8>] (hub_event [usbcore]) from [<c005754c>] (process_one_work+0x128/0x340) [ 155.290196] r10:00000000 r9:00000003 r8:00000000 r7:fedfa000 r6:eeec5400 r5:ee598314 [ 155.298151] r4:ee434380 [ 155.300718] [<c0057424>] (process_one_work) from [<c00578f8>] (worker_thread+0x158/0x49c) [ 155.308963] r10:ee434380 r9:00000003 r8:eeec5400 r7:00000008 r6:ee434398 r5:eeec5400 [ 155.316913] r4:eeec5414 [ 155.319482] [<c00577a0>] (worker_thread) from [<c005cc40>] (kthread+0xdc/0xf8) [ 155.326765] r10:00000000 r9:00000000 r8:00000000 r7:c00577a0 r6:ee434380 r5:ee4441c0 [ 155.334713] r4:00000000 r3:00000000 [ 155.338341] [<c005cb64>] (kthread) from [<c000fc08>] (ret_from_fork+0x14/0x2c) [ 155.345626] r7:00000000 r6:00000000 r5:c005cb64 r4:ee4441c0 [ 155.356108] ---[ end trace a58d34c223b190e6 ]--- [ 155.360783] xhci-hcd xhci-hcd.0.auto: Virt dev invalid for slot_id 0x1! [ 155.574404] xhci-hcd xhci-hcd.0.auto: xhci_setup_device [ 155.579667] ------------[ cut here ]------------ Cc: <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-22usb: xhci: stop everything on the first call to xhci_stopRoger Quadros1-15/+5
xhci_stop will be called twice, once for the shared hcd and again for the primary hcd. We stop the XHCI controller in any case so clean up everything on the first call else we can timeout waiting for pending requests to complete. Cc: <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-22usb: xhci: Clear XHCI_STATE_DYING on startRoger Quadros1-1/+2
For whatever reason if XHCI died in the previous instant then it will never recover on the next xhci_start unless we clear the DYING flag. Cc: <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-22usb: xhci: lock mutex on xhci_stopRoger Quadros1-0/+4
Else it races with xhci_setup_device Cc: <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-22xhci: Move xhci_pme_quirk() behind #ifdef CONFIG_PMTomer Barletz1-45/+45
xhci_pme_quirk() is only used when CONFIG_PM is defined. Compiling a kernel without PM complains about this function [reworded commit message -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: Tomer Barletz <barletz@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-22xhci: give command abortion one more chance before killing xhciMathias Nyman1-0/+9
We want to give the command abortion an additional try to stop the command ring before we completely hose xhci. Cc: <stable@vger.kernel.org> Tested-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-22usb: Use the USB_SS_MULT() macro to get the burst multiplier.Mathias Nyman1-2/+3
Bits 1:0 of the bmAttributes are used for the burst multiplier. The rest of the bits used to be reserved (zero), but USB3.1 takes bit 7 into use. Use the existing USB_SS_MULT() macro instead to make sure the mult value and hence max packet calculations are correct for USB3.1 devices. Note that burst multiplier in bmAttributes is zero based and that the USB_SS_MULT() macro adds one. Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-22Merge tag 'fixes-for-v4.3-rc3' of ↵Greg Kroah-Hartman10-30/+54
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.3-rc3 Here's the second pull request for current -rc cycle. A few fixes on dummy_hcd which have been around for longer than they should be. MUSB got a couple fixes, the most important of which is a fix to DMA channel teardown on AM335x devices. And DWC3 got a minor fix for when using RT-enabled kernels.
2015-09-21usb: dwc3: gadget: Fix BUG in RT configRoger Quadros1-4/+0
Using spin_lock() in hard irq handler is pointless and causes a BUG() in RT (real-time) configuration so get rid of it. The reason it's pointless is because the driver is basically accessing register which is, anyways, atomic. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: musb: fix cppi channel teardown for isoch transferBin Liu1-0/+3
After a few iterations of start/stop UVC camera streaming, the streaming stops. This patch adds 250us delay in the cppi channel abort path to let cppi drain properly. Using 50us delay seems to be too aggressive, some webcams are still broken. 250us is the original value used in TI 3.2 kernel. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: phy: isp1301: Export I2C module alias informationJavier Martinez Canillas1-0/+1
The I2C core always reports the MODALIAS uevent as "i2c:<client name" regardless if the device was registered using OF or platform code so So the driver needs to export the I2C table and this be built into the module or udev won't have the necessary information to auto load the module when the device is added. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: drop null test before destroy functionsJulia Lawall4-8/+4
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: dummy_hcd: in transfer(), return data sent, not limitIgor Kotrasinski1-2/+4
dummy_timer uses transfer() to update transfer limit. However, limit passed to dummy_timer changes depending on transfer type, so the actual limit is overwritten. This can cause unpredictably slow / fast bulk transfers when coupled with control / interrupt transfers. Fix by returning actual amount of data sent in transfer() and substracting from total. Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: dummy_hcd: fix rescan logic for transferIgor Kotrasinski1-5/+8
transfer() schedules a rescan for transfers larger than maxpacket, which is wrong for transfers that are multiples of maxpacket. Rewrite to fix and clarify packet multiple / remainder transfer logic. Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: dummy_hcd: fix unneeded else-if conditionIgor Kotrasinski1-1/+1
We already know at this point that to_host is false. Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: dummy_hcd: emulate sending zlp in packet logicIgor Kotrasinski1-8/+17
currently, when a zlp flag is set and an urb/usb_request buffer is filled without a short packet, transfer() leaves its status at -EINPROGRESS and does not rescan for short packet. In a scenario where ep.maxpacket bytes are copied, URB_ZERO_PACKET is set, urb buffer is filled and usb_request buffer is not, transfer() returns with an urb with -EINPROGRESS status, which dummy_hcd treats as incomplete transfer. Check for zlp and rescan appropriately. Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: musb: dsps: fix polling in device-only modeBin Liu1-2/+5
Fix the regression caused by commit ad78c918602 ("usb: musb: dsps: just start polling already") which causes polling the ID pin status even in device-only mode. Fixes: ad78c918602c ("usb: musb: dsps: just start polling already") Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: atmel_usba_udc: add ep capabilities support on device tree bindingSylvain Rochet1-0/+11
The recently added endpoint capabilities flags verification breaks Atmel USBA because the endpoint configuration was only added when the driver is bound using the legacy pdata interface. Convert endpoint configuration to new capabilities model when driver is bound to a device tree as well. Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Fixes: 47bef3865115 ("usb: gadget: atmel_usba_udc: add ep capabilities support") Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-18Merge tag 'usb-ci-v4.3-rc2' of ↵Greg Kroah-Hartman3-47/+64
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: USB Chipidea fixes for v4.3-rc2 - Fix the stall implementation - Fix device mode transfer at zynq platform - other small fixes
2015-09-17Merge tag 'usb-serial-4.3-rc2' of ↵Greg Kroah-Hartman1-0/+24
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.3-rc2 Just some new ZTE device IDs. Signed-off-by: Johan Hovold <johan@kernel.org>
2015-09-16usb: chipidea: imx: fix a typo for imx6sxLi Jun1-1/+1
Use imx6sx instead of imx6sl's platform flags for imx6sx. Fixes: e14db48dfcf3 ("usb: chipidea: imx: add runtime power management support") Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-09-15usb: chipidea: add xilinx zynq platform dataNathan Sullivan1-6/+19
Due to having hardware tx buffers less than 512 bytes in size, streaming must be enabled on the Zynq for the udc to work at all. Add platform data specific to the Zynq udc, which does not set the CI_HDRC_DISABLE_STREAMING flag. Based on a patch by the same name from the Xilinx vendor tree. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-09-15usb: chipidea: udc: using the correct stall implementationPeter Chen1-40/+44
According to spec, there are functional and protocol stalls. For functional stall, it is for bulk and interrupt endpoints, below are cases for it: - Host sends SET_FEATURE request for Set-Halt, the udc driver needs to set stall, and return true unconditionally. - The gadget driver may call usb_ep_set_halt to stall certain endpoints, if there is a transfer in pending, the udc driver should not set stall, and return -EAGAIN accordingly. These two kinds of stall need to be cleared by host using CLEAR_FEATURE request (Clear-Halt). For protocol stall, it is for control endpoint, this stall will be set if the control request has failed. This stall will be cleared by next setup request (hardware will do it). It fixed usbtest (drivers/usb/misc/usbtest.c) Test 13 "set/clear halt" test failure, meanwhile, this change has been verified by USB2 CV Compliance Test and MSC Tests. Cc: <stable@vger.kernel.org> #3.10+ Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-09-14usb: phy: phy-generic: Fix reset behaviour on legacy bootRoger Quadros1-1/+2
The gpio-desc migration done in v4.0 caused a regression with legacy boots due to reversed reset logic. e.g. omap3-beagle USB host breaks on legacy boot. Request the reset GPIO with GPIOF_ACTIVE_LOW flag so that it matches the driver logic and pin behaviour. Fixes: e9f2cefb0cdc ("usb: phy: generic: migrate to gpio_desc") Cc: <stable@vger.kernel.org> # 4.0+ Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14usb: musb: ux500: Fix module autoload for OF platform driverLuis de Bethencourt1-0/+2
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14usb: musb: Disable interrupts on suspend, enable them on resumePascal Huerst1-0/+6
In certain situations, an interrupt triggers on resume, before musb_start() has been called. This has been observed to cause enumeration issues after suspend/resume cycles with AM335x. Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14usb: gadget: amd5536udc: fix error handling in udc_pci_probe()Alexey Khoroshilov1-23/+20
If a failure happens early in udc_pci_probe(), error handling code just kfree(dev) and returns. The patch adds proper resource deallocations in udc_pci_probe() itself, since udc_pci_remove() is not suitabe to be called so early in initialization process. By the way, iounmap(dev->regs) is replaced by iounmap(dev->virt_addr) in udc_pci_remove() for clarity. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14usb: phy: fix phy-qcom-8x16-usb buildRandy Dunlap1-1/+1
Fix build errors that happen when USB_QCOM_8X16_PHY=y and EXTCON=m: drivers/built-in.o: In function `phy_8x16_init': phy-qcom-8x16-usb.c:(.text+0x86ef4): undefined reference to `extcon_get_cable_state' drivers/built-in.o: In function `phy_8x16_probe': phy-qcom-8x16-usb.c:(.text+0x870bf): undefined reference to `extcon_get_edev_by_phandle' phy-qcom-8x16-usb.c:(.text+0x87133): undefined reference to `extcon_register_interest' phy-qcom-8x16-usb.c:(.text+0x87151): undefined reference to `extcon_unregister_interest' drivers/built-in.o: In function `phy_8x16_remove': phy-qcom-8x16-usb.c:(.text+0x872ec): undefined reference to `extcon_unregister_interest' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14usb: musb: ensure in peripheral mode when checking sessionBin Liu1-0/+1
The change ensures otg is not in a A- state when checking for VBUS in peripheral mode. musb_start() where VBUS checking is in can be called in many situations. One example is in babble recovery routine, in which otg is transitioning from A-HOST to A-WAIT-BCON, but VBUS discharge takes time, so musb->is_active could be set to 1 due to this improper checking, then it causes musb_bus_suspend() failed which leads to warning log message flooding. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14usb: dwc3: omap: enable irqs latelyFelipe Balbi1-2/+2
If we enable IRQs before requesting our extcon device, we might fall into a situation where and IRQ fires before we're ready to handle it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14usb: gadget: fix possible regression introduced with ep->claimedRobert Baldyga1-0/+1
This patch fixes possible regression introduced by patch reworking endpoint claiming mechanism. It restores setring ep->driver_data to NULL in usb_ep_autoconfig_reset(), which was removed by patch commit cc476b42a39d. Fixes: cc476b42a39d ("usb: gadget: encapsulate endpoint claiming mechanism") Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14USB: option: add ZTE PIDsLiu.Zhao1-0/+24
This is intended to add ZTE device PIDs on kernel. Signed-off-by: Liu.Zhao <lzsos369@163.com> Cc: stable <stable@vger.kernel.org> [johan: sort the new entries ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-09-02Merge branch 'for-next' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree for 4.3 (kerneldoc updates, printk() fixes, Documentation and MAINTAINERS updates)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) MAINTAINERS: update my e-mail address mod_devicetable: add space before */ scsi: a100u2w: trivial typo in printk i2c: Fix typo in i2c-bfin-twi.c treewide: fix typos in comment blocks Doc: fix trivial typo in SubmittingPatches proportions: Spelling s/consitent/consistent/ dm: Spelling s/consitent/consistent/ aic7xxx: Fix typo in error message pcmcia: Fix typo in locking documentation scsi/arcmsr: Fix typos in error log drm/nouveau/gr: Fix typo in nv10.c [SCSI] Fix printk typos in drivers/scsi staging: comedi: Grammar s/Enable support a/Enable support for a/ Btrfs: Spelling s/consitent/consistent/ README: GTK+ is a acronym ASoC: omap: Fix typo in config option description mm: tlb.c: Fix error message ntfs: super.c: Fix error log fix typo in Documentation/SubmittingPatches ...
2015-08-18USB: qcserial: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G ModuleDavid Ward1-0/+1
This is an HP-branded Sierra Wireless EM7355: https://bugzilla.redhat.com/show_bug.cgi?id=1223646#c2 Signed-off-by: David Ward <david.ward@ll.mit.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18USB: ftdi_sio: Added custom PID for CustomWare productsMatthijs Kooijman2-0/+12
CustomWare uses the FTDI VID with custom PIDs for their ShipModul MiniPlex products. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18USB: usb_wwan: silence read errors on disconnectJohan Hovold1-1/+1
Silence read-urb resubmission errors when the device is going away. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18USB: option: silence interrupt errorsJohan Hovold1-1/+1
Avoid spamming the logs (e.g. with -EPROTO errors) when attempting to resubmit the interrupt urb while a disconnect of an in-use device is being processed. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18USB: symbolserial: Correct transferred data sizePhilipp Hachtmann1-10/+8
The scanner (here DS3508) always returns 64 bytes per urb buffer. The first byte indicates the data length used in the current buffer. There even was a comment describing this. But the comment also said that we'll send everything in the buffer to the tty layer. That means sending the actual barcode data and lots of trailing zeroes. This patch lets the driver only send the real data. Signed-off-by: Philipp Hachtmann <hachti@hachti.de> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18USB: symbolserial: Use usb_get_serial_port_dataPhilipp Hachtmann1-3/+3
The driver used usb_get_serial_data(port->serial) which compiled but resulted in a NULL pointer being returned (and subsequently used). I did not go deeper into this but I guess this is a regression. Signed-off-by: Philipp Hachtmann <hachti@hachti.de> Fixes: a85796ee5149 ("USB: symbolserial: move private-data allocation to port_probe") Cc: stable <stable@vger.kernel.org> # v3.10 Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18usb: misc: usbtest: format max packet size for iso transferPeter Chen1-3/+4
The current code prints all wMaxPacketSize content at endpoint descriptor, if there is a high speed, high bandwidth endpoint, it may confuse the users, eg, if there are 3 transactions during microframe, it will print "wMaxPacket 1400" for packet content. This commit splits wMaxpacketSize and transaction numbers for output messages. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18usb: host: ehci-sys: delete useless bus_to_hcd conversionPeter Chen1-4/+4
The ehci platform device's drvdata is the pointer of struct usb_hcd already, so we doesn't need to call bus_to_hcd conversion again. Cc: <stable@vger.kernel.org> Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18Revert "usb: interface authorization: Introduces the default interface ↵Greg Kroah-Hartman2-48/+0
authorization" This reverts commit 1d958bef45030acfc5578263e9de3bb07032b8da as the signed-off-by address is invalid. Cc: Stefan Koch <stefan.koch10@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18Revert "usb: interface authorization: Control interface probing and claiming"Greg Kroah-Hartman1-8/+0
This reverts commit de7718bd9c4d3db96991a98c2a0cb38258a04e47 as the signed-off-by address is invalid. Cc: Stefan Koch <stefan.koch10@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18Revert "usb: interface authorization: Introduces the USB interface ↵Greg Kroah-Hartman2-40/+0
authorization" This reverts commit ef0909c50fe63be3f9aa09bdf4db7efaa5919be9 as the signed-off-by address is invalid. Cc: Stefan Koch <stefan.koch10@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18Revert "usb: interface authorization: SysFS part of USB interface authorization"Greg Kroah-Hartman1-36/+0
This reverts commit 187b3d75bbfba45a38b5d1d3656c0f11f6f6f2d0 as the signed-off-by address is invalid. Cc: Stefan Koch <stefan.koch10@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18Revert "usb: interface authorization: Use a flag for the default device ↵Greg Kroah-Hartman2-22/+11
authorization" This reverts commit 3cf1fc80655d3af7083ea4b3615e5f8532543be7 as the signed-off-by address is invalid. Cc: Stefan Koch <stefan.koch10@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-17Merge tag 'usb-serial-4.3-rc1' of ↵Greg Kroah-Hartman3-76/+240
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v4.3-rc1 Here's a fix for a long-standing issue with the pl2303 divisor calculations that affects some non-standard baudrates that were enabled in v3.18. Adding support for newer Edgeport devices and firmware required changes to the io_ti driver and also exposed some issues with the driver's current firmware handling. Included is also a URL comment-typo fix. Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 00:09:03 +0300