summaryrefslogtreecommitdiff
path: root/drivers/usb/mtu3/mtu3.h
AgeCommit message (Collapse)AuthorFilesLines
2019-09-03usb: mtu3: register a USB Role Switch for dual role modeChunfeng Yun1-0/+5
Because extcon is not allowed for new bindings, and the dual role switch is supported by USB Role Switch, especially for Type-C drivers, so register a USB Role Switch to support the new way Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1567070558-29417-12-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: supports new QMU formatChunfeng Yun1-5/+6
In order to support U3gen2 ISOC transfer upto 96DPs, extend the data buffer length. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: rebuild qmu_gpd struct to prepare to support new QMU formatChunfeng Yun1-29/+16
To support USB3 Gen2 ISOC, the data buffer length need be extended, it's hard to make the current qmu_gpd struct compatible, so here rebuild qmu_gpd struct and make easy to support new QMU format Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: fix transfer error of USB3 Gen2 isocChunfeng Yun1-0/+11
To support USB3 Gen2 ISOC, the registers of TXCSR1 and RXCSR1 are adjusted to support greater maxpkt and mult value, this patch fix this issue Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: fix warning of sleep in atomic context in notifier callbackChunfeng Yun1-1/+10
The notifier callbacks of extcon are called in atomic context, but the callbacks will call regulator_enable()/regulator_disable() which may sleep caused by mutex, so use work queue to call the sleep functions. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-15usb: mtu3: fix an unrecognized issue when connected with PCChunfeng Yun1-4/+0
When boot on the platform with the USB cable connected to Win7, the Win7 will pop up an error dialog: "USB Device not recognized", but finally the Win7 can enumerate it successfully. The root cause is as the following: When the xHCI driver set PORT_POWER of the OTG port, and if both IDPIN and VBUS_VALID are high at the same time, the MTU3 controller will set SESSION and pull up DP, so the Win7 can detect existence of USB device, but if the mtu3 driver can't switch to device mode during the debounce time, the Win7 can not enumerate it. Here to fix it by removing the 1s delayed EXTCON register to speed up mode switch. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-01-09usb: mtu3: supports remote wakeup for mt2712 with two SSUSB IPsChunfeng Yun1-3/+8
The old way of usb wakeup only supports platform with single SSUSB IP, such as mt8173, but mt2712 has two SSUSB IPs, so rebuild its flow and also supports the new glue layer of usb wakeup on mt2712 which is different from mt8173. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07USB: mtu3: Remove redundant license textGreg Kroah-Hartman1-10/+0
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19usb: mtu3: add support for usb3.1 IPChunfeng Yun1-0/+1
Support SuperSpeedPlus for usb3.1 device IP Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: use FORCE/RG_IDDIG to implement manual DRD switchChunfeng Yun1-5/+13
In order to keep manual DRD switch independent on IDDIG interrupt, make use of FORCE/RG_IDDIG instead of IDDIG EINT interrupt to implement manual DRD switch function. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: support 36-bit DMA addressChunfeng Yun1-2/+15
add support for 36-bit DMA address [ Felipe Balbi: fix printk format for dma_addr_t ] Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: add optional mcu and dma bus clocksChunfeng Yun1-0/+5
There are mcu_bus and dma_bus clocks needed to be turned on/off by driver on some SoCs, so add them as optional ones Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: remove dummy wakeup debounce clocksChunfeng Yun1-4/+0
The wakeup debounce clocks for each ports in fact are not needed, so remove them. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: support option to disable usb3 portsChunfeng Yun1-0/+3
Add support to disable specific usb3 ports, it's useful when usb3 phy is shared with PCIe or SATA, because we should disable the corresponding usb3 port if the phy is used by PCIe or SATA. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-07-30usb: mtu3: handle delayed status of the control transferChunfeng Yun1-0/+2
Add the delayed status handling. This is used by mass storage etc to gain some extra time to setup its internal status before it can proceed further requests, and once the gadget is ready, it will enqueue an empty packet which is used for synchronization. The issue may happen on some FGPA platform with very low cpu frequency. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25usb: mtu3: cleanup with list_first_entry_or_null()Masahiro Yamada1-6/+2
The combo of list_empty() and list_first_entry() can be replaced with list_first_entry_or_null(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19usb: mtu3: add reference clockChunfeng Yun1-0/+1
usually, the reference clock comes from 26M oscillator directly, but some SoCs are not, add it for compatibility. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: mtu3: dual-role mode supportChunfeng Yun1-1/+33
support dual-role mode; there are two ways to switch between host and device modes, one is by idpin, another is by debugfs which depends on user input. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: mtu3: host only mode supportChunfeng Yun1-6/+41
supports host only mode and the code is ported from host/xhci-mtk.c IPPC register shared between host and device is moved into common glue layer. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: mtu3: Super-Speed Peripheral mode supportChunfeng Yun1-2/+11
add super-speed funtion for peripheral mode Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: Add MediaTek USB3 DRD driverChunfeng Yun1-0/+341
This patch adds support for the MediaTek USB3 controller integrated into MT8173. It currently supports High-Speed Peripheral Only mode. Super-Speed Peripheral, Dual-Role Device and Host Only (xHCI) modes will be added in the next patchs. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 03:50:37 +0300