summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc3
AgeCommit message (Collapse)AuthorFilesLines
2024-09-03usb: dwc3: qcom: use scoped device node handling to simplify error pathsKrzysztof Kozlowski1-6/+5
Obtain the device node reference with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-7-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: imx8mp: use scoped device node handling to simplify error pathsKrzysztof Kozlowski1-12/+8
Obtain the device node reference with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Scoped/cleanup.h coding style expects variable declaration with initialization, so the of_get_compatible_child() call has to be moved earlier, before any goto jumps happen. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-6-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: imx8mp: simplify with dev_err_probeKrzysztof Kozlowski1-10/+6
Use dev_err_probe() to make the error paths a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-5-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: imx8mp: simplify with devm_clk_get_enabledKrzysztof Kozlowski1-27/+5
Use devm_clk_get_enabled() to drop clock preparing and handling from error and remove paths. This makes the code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-4-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: st: simplify pdev->dev usageKrzysztof Kozlowski1-2/+2
The probe() function already stores '&pdev->dev' in local 'dev' variable. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-3-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: st: simplify with dev_err_probeKrzysztof Kozlowski1-6/+5
Use dev_err_probe() to make the error paths a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-2-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: st: use scoped device node handling to simplify error pathsKrzysztof Kozlowski1-14/+11
Obtain the device node reference with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Scoped/cleanup.h coding style expects variable declaration with initialization, so the of_get_compatible_child() call has to be moved earlier, before any goto jumps happen. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-1-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03Merge 6.11-rc6 into usb-nextGreg Kroah-Hartman5-12/+26
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: st: add missing depopulate in probe error pathKrzysztof Kozlowski1-1/+4
Depopulate device in probe error paths to fix leak of children resources. Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814093957.37940-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: st: fix probed platform device ref count on probe error pathKrzysztof Kozlowski1-8/+3
The probe function never performs any paltform device allocation, thus error path "undo_platform_dev_alloc" is entirely bogus. It drops the reference count from the platform device being probed. If error path is triggered, this will lead to unbalanced device reference counts and premature release of device resources, thus possible use-after-free when releasing remaining devm-managed resources. Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20240814093957.37940-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)Michael Grzeschik1-1/+2
The DWC3_EP_RESOURCE_ALLOCATED flag ensures that the resource of an endpoint is only assigned once. Unless the endpoint is reset, don't clear this flag. Otherwise we may set endpoint resource again, which prevents the driver from initiate transfer after handling a STALL or endpoint halt to the control endpoint. Commit f2e0eee47038 ("usb: dwc3: ep0: Don't reset resource alloc flag") was fixing the initial issue, but did this only for physical ep1. Since the function dwc3_ep0_stall_and_restart is resetting the flags for both physical endpoints, this also has to be done for ep0. Cc: stable@vger.kernel.org Fixes: b311048c174d ("usb: dwc3: gadget: Rewrite endpoint allocation flow") Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20240814-dwc3hwep0reset-v2-1-29e1d7d923ea@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: xilinx: add missing depopulate in probe error pathKrzysztof Kozlowski1-1/+6
Depopulate device in probe error paths to fix leak of children resources. Fixes: 53b5ff83d893 ("usb: dwc3: xilinx: improve error handling for PM APIs") Cc: stable@vger.kernel.org Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240816075409.23080-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: omap: add missing depopulate in probe error pathKrzysztof Kozlowski1-1/+3
Depopulate device in probe error paths to fix leak of children resources. Fixes: ee249b455494 ("usb: dwc3: omap: remove IRQ_NOAUTOEN used with shared irq") Cc: stable@vger.kernel.org Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/20240816075409.23080-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: core: Prevent USB core invalid event buffer address accessSelvarasu Ganesan1-0/+8
This commit addresses an issue where the USB core could access an invalid event buffer address during runtime suspend, potentially causing SMMU faults and other memory issues in Exynos platforms. The problem arises from the following sequence. 1. In dwc3_gadget_suspend, there is a chance of a timeout when moving the USB core to the halt state after clearing the run/stop bit by software. 2. In dwc3_core_exit, the event buffer is cleared regardless of the USB core's status, which may lead to an SMMU faults and other memory issues. if the USB core tries to access the event buffer address. To prevent this hardware quirk on Exynos platforms, this commit ensures that the event buffer address is not cleared by software when the USB core is active during runtime suspend by checking its status before clearing the buffer address. Cc: stable <stable@kernel.org> Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240815064836.1491-1-selvarasu.g@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: dwc3: Use of_property_read_variable_u32_array() to read "power"Rob Herring (Arm)1-15/+4
There's no need to get the length of an DT array property before parsing the array. of_property_read_variable_u32_array() takes a minimum and maximum length and returns the actual length (or error code). This is part of a larger effort to remove callers of of_find_property() and similar functions. of_find_property() leaks the DT struct property and data pointers which is a problem for dynamically allocated nodes which may be freed. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240731201407.1838385-5-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: dwc3: imx8mp: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()Fabio Estevam1-12/+10
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives. The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS() allows the compiler to evaluate if the runtime suspend/resume() functions are used at build time or are simply dead code. This allows removing the __maybe_unused notation from the runtime suspend/resume() functions. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240806114231.2603055-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-20Merge tag 'usb-6.11-rc1' of ↵Linus Torvalds4-13/+94
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.11-rc1. Nothing earth-shattering in here, just constant forward progress in adding support for new hardware and better debugging functionalities for thunderbolt devices and the subsystem. Included in here are: - thunderbolt debugging update and driver additions - xhci driver updates - typec driver updates - kselftest device driver changes (acked by the relevant maintainers, depended on other changes in this tree.) - cdns3 driver updates - gadget driver updates - MODULE_DESCRIPTION() additions - dwc3 driver updates and fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (112 commits) kselftest: devices: Add test to detect device error logs kselftest: Move ksft helper module to common directory kselftest: devices: Move discoverable devices test to subdirectory usb: gadget: f_uac2: fix non-newline-terminated function name USB: uas: Implement the new shutdown callback USB: core: add 'shutdown' callback to usb_driver usb: typec: Drop explicit initialization of struct i2c_device_id::driver_data to 0 usb: dwc3: enable CCI support for AMD-xilinx DWC3 controller usb: dwc2: add support for other Lantiq SoCs usb: gadget: Use u16 types for 16-bit fields usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup usb: dwc3: core: Check all ports when set phy suspend usb: typec: tcpci: add support to set connector orientation dt-bindings: usb: Convert fsl-usb to yaml usb: typec: ucsi: reorder operations in ucsi_run_command() usb: typec: ucsi: extract common code for command handling usb: typec: ucsi: inline ucsi_read_message_in usb: typec: ucsi: rework command execution functions usb: typec: ucsi: split read operation usb: typec: ucsi: simplify command sending API ...
2024-07-10usb: dwc3: enable CCI support for AMD-xilinx DWC3 controllerRadhey Shyam Pandey3-0/+74
The GSBUSCFG0 register bits [31:16] are used to configure the cache type settings of the descriptor and data write/read transfers (Cacheable, Bufferable/Posted). When CCI is enabled in the design, DWC3 core GSBUSCFG0 cache bits must be updated to support CCI enabled transfers in USB. To program GSBUSCFG0 cache bits create a software node property in AMD-xilinx dwc3 glue driver and pass it to dwc3 core. The core then reads this property value and configures it in dwc3_core_init() sequence. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/1720548651-726412-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-03usb: dwc3: pci: add support for the Intel Panther LakeHeikki Krogerus1-0/+8
This patch adds the necessary PCI IDs for Intel Panther Lake devices. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240628111834.1498461-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-03usb: dwc3: core: Check all ports when set phy suspendThinh Nguyen1-12/+17
The dwc3_enable_susphy() applies to all available ports. After the introduction of multi-port in dwc3, we now know the number of ports. Go through the phy suspend registers of each port to enable/disable phy suspend in dwc3_enable_susphy(). Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/31e18192c607dff0a7e5ca139dd5737d2224122a.1719879346.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-01Merge 6.10-rc6 into usb-nextGreg Kroah-Hartman1-7/+19
We need the USB fixes in here as well for some follow-on patches. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-27usb: dwc3: core: Workaround for CSR read timeoutJos Wang1-1/+19
This is a workaround for STAR 4846132, which only affects DWC_usb31 version2.00a operating in host mode. There is a problem in DWC_usb31 version 2.00a operating in host mode that would cause a CSR read timeout When CSR read coincides with RAM Clock Gating Entry. By disable Clock Gating, sacrificing power consumption for normal operation. Cc: stable <stable@kernel.org> # 5.10.x: 1e43c86d: usb: dwc3: core: Add DWC31 version 2.00a controller Signed-off-by: Jos Wang <joswang@lenovo.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240619114529.3441-1-joswang1221@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-20usb: dwc3: core: remove lock of otg mode during gadget suspend/resume to ↵Meng Li1-6/+0
avoid deadlock When config CONFIG_USB_DWC3_DUAL_ROLE is selected, and trigger system to enter suspend status with below command: echo mem > /sys/power/state There will be a deadlock issue occurring. Detailed invoking path as below: dwc3_suspend_common() spin_lock_irqsave(&dwc->lock, flags); <-- 1st dwc3_gadget_suspend(dwc); dwc3_gadget_soft_disconnect(dwc); spin_lock_irqsave(&dwc->lock, flags); <-- 2nd This issue is exposed by commit c7ebd8149ee5 ("usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend") that removes the code of checking whether dwc->gadget_driver is NULL or not. It causes the following code is executed and deadlock occurs when trying to get the spinlock. In fact, the root cause is the commit 5265397f9442("usb: dwc3: Remove DWC3 locking during gadget suspend/resume") that forgot to remove the lock of otg mode. So, remove the redundant lock of otg mode during gadget suspend/resume. Fixes: 5265397f9442 ("usb: dwc3: Remove DWC3 locking during gadget suspend/resume") Cc: Xu Yang <xu.yang_2@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Meng Li <Meng.Li@windriver.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240618031918.2585799-1-Meng.Li@windriver.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-20usb: dwc3: Support quirk for writing high-low orderDaehwan Jung1-1/+3
There's the limitation of Synopsys dwc3 controller with ERST programming in supporting separate ERSTBA_HI and ERSTBA_LO programming. It's supported when the ERSTBA is programmed ERSTBA_HI before ERSTBA_LO. But, writing operations in xHCI is done low-high order following xHCI spec. xHCI specification 5.1 "Register Conventions" states that 64 bit registers should be written in low-high order. Synopsys dwc3 needs workaround for high-low order. That's why adding new quirk is needed to support this. Signed-off-by: Daehwan Jung <dh10.jung@samsung.com> Link: https://lore.kernel.org/r/1718019553-111939-2-git-send-email-dh10.jung@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-23tracing/treewide: Remove second parameter of __assign_str()Steven Rostedt (Google)1-4/+4
With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs Tested-by: Guenter Roeck <linux@roeck-us.net>
2024-05-11usb: dwc3: core: Fix unused variable warning in core driverKrishna Kurapati1-3/+0
While fixing a merge conflict in linux-next, hw_mode variable was left unused. Remove the unused variable in hs_phy_setup call. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/all/202405030439.AH8NR0Mg-lkp@intel.com/ Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240506074939.1833835-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: dwc3: Wait unconditionally after issuing EndXfer commandPrashanth K1-3/+1
Currently all controller IP/revisions except DWC3_usb3 >= 310a wait 1ms unconditionally for ENDXFER completion when IOC is not set. This is because DWC_usb3 controller revisions >= 3.10a supports GUCTL2[14: Rst_actbitlater] bit which allows polling CMDACT bit to know whether ENDXFER command is completed. Consider a case where an IN request was queued, and parallelly soft_disconnect was called (due to ffs_epfile_release). This eventually calls stop_active_transfer with IOC cleared, hence send_gadget_ep_cmd() skips waiting for CMDACT cleared during EndXfer. For DWC3 controllers with revisions >= 310a, we don't forcefully wait for 1ms either, and we proceed by unmapping the requests. If ENDXFER didn't complete by this time, it leads to SMMU faults since the controller would still be accessing those requests. Fix this by ensuring ENDXFER completion by adding 1ms delay in __dwc3_stop_active_transfer() unconditionally. Cc: stable@vger.kernel.org Fixes: b353eb6dc285 ("usb: dwc3: gadget: Skip waiting for CMDACT cleared during endxfer") Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240502044103.1066350-1-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10Merge 6.9-rc7 into usb-nextGreg Kroah-Hartman4-57/+68
We want the USB fixes in here as well, and resolve a merge conflict in drivers/usb/dwc3/core.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-30usb: dwc3: exynos: add support for Google Tensor gs101André Draszik1-0/+9
The Exynos-based Google Tensor gs101 SoC has a DWC3 compatible USB controller and can reuse the existing Exynos glue. Add the google,gs101-dwusb3 compatible and associated driver data. Four clocks are required for USB for this SoC: * bus clock * suspend clock * Link interface AXI clock * Link interface APB clock Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240423-usb-dwc3-gs101-v1-2-2f331f88203f@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-26usb: dwc3: core: Fix compile warning on s390 gcc in dwc3_get_phy callKrishna Kurapati1-3/+3
Recent commit introduced support for reading Multiport PHYs and while doing so iterated over an integer variable which runs from [0-254] in the worst case scenario. But S390 compiler treats it as a warning and complains that the integer write to string can go to 11 characters. Fix this by modifying iterator variable to u8. Suggested-by: Johan Hovold <johan@kernel.org> Fixes: 30a46746ca5a ("usb: dwc3: core: Refactor PHY logic to support Multiport Controller") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404241215.Mib19Cu7-lkp@intel.com/ Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240426050512.57384-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-24usb: dwc3: qcom: Add multiport suspend/resume support for wrapperKrishna Kurapati1-6/+17
Power event IRQ is used for wakeup either when the controller is SuperSpeed capable but is missing an SuperSpeed PHY interrupt, or when the GIC is not capable of detecting DP/DM High-Speed PHY interrupts. The Power event IRQ stat register indicates whether the High-Speed phy entered and exited L2 successfully during suspend and resume. Indicate the same for all ports of a multiport controller. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240420044901.884098-10-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-24usb: dwc3: qcom: Enable wakeup for applicable ports of multiportKrishna Kurapati1-30/+41
DWC3 Qcom wrapper currently supports only wakeup configuration for single port controllers. Read speed of each port connected to the controller and enable wakeup for each of them accordingly. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240420044901.884098-9-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-24usb: dwc3: qcom: Refactor IRQ handling in glue driverKrishna Kurapati1-34/+106
On multiport supported controllers, each port has its own DP/DM and SuperSpeed (if super speed capable) interrupts. As per the bindings, their interrupt names differ from single-port ones by having a "_x" added as suffix (x being the port number). Identify from the interrupt names whether the controller is a multiport controller or not. Refactor dwc3_qcom_setup_irq() call to parse multiportinterrupts along with non-multiport ones accordingly. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240420044901.884098-8-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-24usb: dwc3: qcom: Add helper function to request wakeup interruptsKrishna Kurapati1-29/+24
The logic for requesting interrupts is duplicated for each interrupt. In the upcoming patches that introduces support for multiport, it would be better to clean up the duplication before reading mulitport related interrupts. Refactor interrupt setup call by adding a new helper function for requesting the wakeup interrupts. To simplify implementation, make the display name same as the interrupt name expected in Device tree. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240420044901.884098-7-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-24usb: dwc3: core: Refactor PHY logic to support Multiport ControllerKrishna Kurapati3-84/+201
Currently the DWC3 driver supports only single port controller which requires at least one HS PHY and at most one SS PHY. But the DWC3 USB controller can be connected to multiple ports and each port can have their own PHYs. Each port of the multiport controller can either be HS+SS capable or HS only capable Proper quantification of them is required to modify GUSB2PHYCFG and GUSB3PIPECTL registers appropriately. DWC3 multiport controllers are capable to service at most 15 High Speed PHYs and 4 Supser Speed PHYs. Add support for detecting, obtaining and configuring PHYs supported by a multiport controller. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240420044901.884098-5-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-24usb: dwc3: core: Skip setting event buffers for host only controllersKrishna Kurapati1-0/+13
On some SoC's like SA8295P where the tertiary controller is host-only capable, GEVTADDRHI/LO, GEVTSIZ, GEVTCOUNT registers are not accessible. Trying to access them leads to a crash. For DRD/Peripheral supported controllers, event buffer setup is done again in gadget_pullup. Skip setup or cleanup of event buffers if controller is host-only capable. Suggested-by: Johan Hovold <johan@kernel.org> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240420044901.884098-4-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-24usb: dwc3: core: Access XHCI address space temporarily to read port infoKrishna Kurapati2-0/+66
All DWC3 Multi Port controllers that exist today only support host mode. Temporarily map XHCI address space for host-only controllers and parse XHCI Extended Capabilities registers to read number of usb2 ports and usb3 ports present on multiport controller. Each USB Port is at least HS capable. The port info for usb2 and usb3 phy are identified as num_usb2_ports and num_usb3_ports and these are used as iterators for phy operations and for modifying GUSB2PHYCFG/ GUSB3PIPECTL registers accordingly. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240420044901.884098-3-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-24usb: dwc3: core: Prevent phy suspend during initThinh Nguyen4-52/+68
GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY should be cleared during initialization. Suspend during initialization can result in undefined behavior due to clock synchronization failure, which often seen as core soft reset timeout. The programming guide recommended these bits to be cleared during initialization for DWC_usb3.0 version 1.94 and above (along with DWC_usb31 and DWC_usb32). The current check in the driver does not account if it's set by default setting from coreConsultant. This is especially the case for DRD when switching mode to ensure the phy clocks are available to change mode. Depending on the platforms/design, some may be affected more than others. This is noted in the DWC_usb3x programming guide under the above registers. Let's just disable them during driver load and mode switching. Restore them when the controller initialization completes. Note that some platforms workaround this issue by disabling phy suspend through "snps,dis_u3_susphy_quirk" and "snps,dis_u2_susphy_quirk" when they should not need to. Cc: stable@vger.kernel.org Fixes: 9ba3aca8fe82 ("usb: dwc3: Disable phy suspend after power-on reset") Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20da4e5a0c4678c9587d3da23f83bdd6d77353e9.1713394973.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23Merge 6.9-rc5 into usb-nextGreg Kroah-Hartman1-1/+2
We need the usb/thunderbolt fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18usb: dwc3: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functionsAnand Moon1-10/+3
This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to care about when the functions are actually used. Also make use of pm_sleep_ptr() to discard all PM_SLEEP related stuff if CONFIG_PM_SLEEP isn't enabled. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240412142317.5191-6-linux.amoon@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18usb: dwc3: Select 2.0 or 3.0 clk base on maximum_speedThinh Nguyen1-4/+7
The dwc->maximum_speed is determined through the device capability and designer's constraint through device tree binding. If none of them applies, don't let the default coreConsultant setting in GUCTL1 to limit the device operating speed. Normally the default setting will not contradict the device capability or device tree binding. This scenario was found through our internal tests, not an actual bug in the wild. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/65003b0cc37c08a0d22996009f548247ad18c00c.1713308949.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18usb: dwc3: ep0: Don't reset resource alloc flagThinh Nguyen1-1/+2
The DWC3_EP_RESOURCE_ALLOCATED flag ensures that the resource of an endpoint is only assigned once. Unless the endpoint is reset, don't clear this flag. Otherwise we may set endpoint resource again, which prevents the driver from initiate transfer after handling a STALL or endpoint halt to the control endpoint. Cc: stable@vger.kernel.org Fixes: b311048c174d ("usb: dwc3: gadget: Rewrite endpoint allocation flow") Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/00122b7cc5be06abef461776e7cc9f5ebc8bc1cb.1713229786.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09usb: dwc3: pci: Don't set "linux,phy_charger_detect" property on Lenovo Yoga ↵Hans de Goede1-1/+7
Tab2 1380 The Lenovo Yoga Tablet 2 Pro 1380 model is the exception to the rule that devices which use the Crystal Cove PMIC without using ACPI for battery and AC power_supply class support use the USB-phy for charger detection. Unlike the Lenovo Yoga Tablet 2 830 / 1050 models this model has an extra LC824206XA Micro USB switch which does the charger detection. Add a DMI quirk to not set the "linux,phy_charger_detect" property on the 1380 model. This quirk matches on the BIOS version to differentiate the 1380 model from the 830 and 1050 models which otherwise have the same DMI strings. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240406140127.17885-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: dwc3: pci: Drop duplicate IDHeikki Krogerus1-2/+0
Intel Arrow Lake CPU uses the Meteor Lake ID with this controller (the controller that's part of the Intel Arrow Lake chipset (PCH) does still have unique PCI ID). Fixes: de4b5b28c87c ("usb: dwc3: pci: add support for the Intel Arrow Lake-H") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240312115008.1748637-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: dwc3: Properly set system wakeupThinh Nguyen4-0/+25
If the device is configured for system wakeup, then make sure that the xHCI driver knows about it and make sure to permit wakeup only at the appropriate time. For host mode, if the controller goes through the dwc3 code path, then a child xHCI platform device is created. Make sure the platform device also inherits the wakeup setting for xHCI to enable remote wakeup. For device mode, make sure to disable system wakeup if no gadget driver is bound. We may experience unwanted system wakeup due to the wakeup signal from the controller PMU detecting connection/disconnection when in low power (D3). E.g. In the case of Steam Deck, the PCI PME prevents the system staying in suspend. Cc: stable@vger.kernel.org Reported-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Closes: https://lore.kernel.org/linux-usb/70a7692d-647c-9be7-00a6-06fc60f77294@igalia.com/T/#mf00d6669c2eff7b308d1162acd1d66c09f0853c7 Fixes: d07e8819a03d ("usb: dwc3: add xHCI Host support") Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Tested-by: Sanath S <Sanath.S@amd.com> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck Link: https://lore.kernel.org/r/667cfda7009b502e08462c8fb3f65841d103cc0a.1709865476.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-05usb: dwc3: core: Add DWC31 version 2.00a controllerWesley Cheng1-0/+1
Add revision value for identifying DWC31 version 2.00a based controllers. Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20240301213554.7850-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-05usb: dwc3-am62: add workaround for Errata i2409Roger Quadros1-1/+18
All AM62 devices have Errata i2409 [1] due to which USB2 PHY may lock up due to short suspend. Workaround involves setting bit 5 and 4 PLL_REG12 in PHY2 register space after USB controller is brought out of LPSC reset but before controller initialization. Handle this workaround. [1] - https://www.ti.com/lit/er/sprz487d/sprz487d.pdf Signed-off-by: Roger Quadros <rogerq@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240227-for-v6-9-am62-usb-errata-3-0-v4-4-0ada8ddb0767@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-05usb: dwc3-am62: Fix PHY core voltage selectionRoger Quadros1-1/+9
TRM information is outdated and design team has confirmed that PHY_CORE_VOLTAGE should be 0 irrespective of VDD_CORE voltage. Signed-off-by: Roger Quadros <rogerq@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240227-for-v6-9-am62-usb-errata-3-0-v4-3-0ada8ddb0767@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-05usb: dwc3-am62: Disable wakeup at removeRoger Quadros1-0/+1
Disable wakeup at remove. Fixes the below warnings on module unload and reload. > dwc3-am62 f900000.dwc3-usb: couldn't enable device as a wakeup source: -17 > dwc3-am62 f910000.dwc3-usb: couldn't enable device as a wakeup source: -17 Fixes: 4e3972b589da ("usb: dwc3-am62: Enable as a wakeup source by default") Cc: stable@vger.kernel.org # v6.4+ Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20240227-for-v6-9-am62-usb-errata-3-0-v4-2-0ada8ddb0767@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-05usb: dwc3-am62: fix module unload/reload behaviorRoger Quadros1-10/+2
As runtime PM is enabled, the module can be runtime suspended when .remove() is called. Do a pm_runtime_get_sync() to make sure module is active before doing any register operations. Doing a pm_runtime_put_sync() should disable the refclk so no need to disable it again. Fixes the below warning at module removel. [ 39.705310] ------------[ cut here ]------------ [ 39.710004] clk:162:3 already disabled [ 39.713941] WARNING: CPU: 0 PID: 921 at drivers/clk/clk.c:1090 clk_core_disable+0xb0/0xb8 We called of_platform_populate() in .probe() so call the cleanup function of_platform_depopulate() in .remove(). Get rid of the now unnnecessary dwc3_ti_remove_core(). Without this, module re-load doesn't work properly. Fixes: e8784c0aec03 ("drivers: usb: dwc3: Add AM62 USB wrapper driver") Cc: stable@vger.kernel.org # v5.19+ Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20240227-for-v6-9-am62-usb-errata-3-0-v4-1-0ada8ddb0767@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-03 03:41:27 +0300