summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc3
AgeCommit message (Collapse)AuthorFilesLines
2014-07-10dwc3: host: Enable USB3 LPM capabilityPratyush Anand2-0/+21
All dwc3 based xhci host controller supports USB3.0 LPM functionality. Therefore enable it in platform data for all dwc3 based xhci device if DWC3_HOST_USB3_LPM_ENABLE is selected in Kconfig. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-of-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19usb: dwc3: dwc3-omap: Disable/Enable only wrapper interrupts in prepare/completeGeorge Cherian1-2/+13
The dwc3 wrapper driver should not be fiddling with the core interrupts. Disabling the core interrupts in prepare stops xhci from proper operation. So remove disable/enable of core interrupts from prepare/complete. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-19usb: dwc3: dwc3-omap: Fix the crash on module removalGeorge Cherian2-1/+2
Following crash is seen on dwc3_omap removal Unable to handle kernel NULL pointer dereference at virtual address 00000018 pgd = ec098000 [00000018] *pgd=ad1f9831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: usb_f_ss_lb g_zero usb_f_acm u_serial usb_f_ecm u_ether libcomposite configfs snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_hwdep snd_soc_omap snd_pcm_dmaengine snd_soc_core snd_compress snd_pcm snd_tim] CPU: 0 PID: 1296 Comm: rmmod Tainted: G W 3.15.0-rc4-02716-g95c4e18-dirty #10 task: ed05a080 ti: ec368000 task.ti: ec368000 PC is at release_resource+0x14/0x7c LR is at release_resource+0x10/0x7c pc : [<c0044724>] lr : [<c0044720>] psr: 60000013 sp : ec369ec0 ip : 60000013 fp : 00021008 r10: 00000000 r9 : ec368000 r8 : c000e7a4 r7 : 00000081 r6 : bf0062c0 r5 : ed7cd000 r4 : ed7d85c0 r3 : 00000000 r2 : 00000000 r1 : 00000011 r0 : c086d08c Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: ac098059 DAC: 00000015 Process rmmod (pid: 1296, stack limit = 0xec368248) Stack: (0xec369ec0 to 0xec36a000) 9ec0: 00000000 00000001 ed7cd000 c034de94 ed7cd010 ed7cd000 00000000 c034e194 9ee0: 00000000 bf0062cc ed7cd010 c03490b0 ed154cc0 ed4c2570 ed2b8410 ed156810 ed156810 bf006d24 c034db9c c034db84 c034c518 9f20: bf006d24 ed156810 bf006d24 c034cd2c bf006d24 bf006d68 00000800 c034c340 9f40: 00000000 c00a9e5c 00000020 00000000 bf006d68 00000800 ec369f4c 33637764 9f60: 616d6f5f 00000070 00000001 ec368000 ed05a080 c000e670 00000001 c0084010 9f80: 00021088 00000800 00021088 00000081 80000010 0000e6f4 00021088 00000800 9fa0: 00021088 c000e5e0 00021088 00000800 000210b8 00000800 e04f6d00 e04f6d00 9fc0: 00021088 00000800 00021088 00000081 00000001 00000000 be91de08 00021008 9fe0: 4d768880 be91dbb4 b6fc5984 4d76888c 80000010 000210b8 00000000 00000000 [<c0044724>] (release_resource) from [<c034de94>] (platform_device_del+0x6c/0x9c) [<c034de94>] (platform_device_del) from [<c034e194>] (platform_device_unregister+0xc/0x18) [<c034e194>] (platform_device_unregister) from [<bf0062cc>] (dwc3_omap_remove_core+0xc/0x14 [dwc3_omap]) [<bf0062cc>] (dwc3_omap_remove_core [dwc3_omap]) from [<c03490b0>] (device_for_each_child+0x34/0x74) [<c03490b0>] (device_for_each_child) from [<bf0062b4>] (dwc3_omap_remove+0x6c/0x78 [dwc3_omap]) [<bf0062b4>] (dwc3_omap_remove [dwc3_omap]) from [<c034db9c>] (platform_drv_remove+0x18/0x1c) [<c034db9c>] (platform_drv_remove) from [<c034c518>] (__device_release_driver+0x70/0xc8) [<c034c518>] (__device_release_driver) from [<c034cd2c>] (driver_detach+0xb4/0xb8) [<c034cd2c>] (driver_detach) from [<c034c340>] (bus_remove_driver+0x4c/0x90) [<c034c340>] (bus_remove_driver) from [<c00a9e5c>] (SyS_delete_module+0x10c/0x198) [<c00a9e5c>] (SyS_delete_module) from [<c000e5e0>] (ret_fast_syscall+0x0/0x48) Code: e1a04000 e59f0068 eb14505e e5943010 (e5932018) ---[ end trace 7e2a8746ff4fc811 ]--- Segmentation fault [ balbi@ti.com : add CONFIG_OF dependency ] Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-19usb: dwc3: gadget: check link trb after free_slot is increasedZhuang Jin Can1-4/+4
In ISOC transfers, when free_slot points to the last TRB (i.e. Link TRB), and all queued requests meet Missed Interval Isoc error, busy_slot points to trb0. busy_slot->trb0 trb1 ... free_slot->trb31(Link TRB) After end transfer and receiving the XferNotReady event, trb_left is caculated as 1 which is wrong, and no TRB will be primed to the endpoint. The root cause is free_slot is not increased the same way as busy_slot. When busy_slot is increased by one, it checks if points to a link TRB after increasement, but free_slot checks it before increasement. free_slot should behave the same as busy_slot to make the trb_left caculation correct. Reviewed-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by: Jiebing Li <jiebing.li@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-23Merge tag 'usb-for-v3.16' of ↵Greg Kroah-Hartman6-154/+280
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.16 merge window Not a lot here during this merge window. Mostly we just have the usual miscellaneous patches (removal of unnecessary prints, proper dependencies being added to Kconfig, build warning fixes, new device ID, etc. Other than those, the only important new features are the new support for OS Strings which should help Linux Gadget Drivers behave better under MS Windows. Also Babble Recovery implementation for MUSB on AM335x. Lastly, we also have ARCH_QCOM PHY support though phy-msm. Signed-of-by: Felipe Balbi <balbi@ti.com> Conflicts: drivers/usb/phy/phy-mv-u3d-usb.c
2014-05-15usb: dwc3: convert to pcim_enable_device()Andy Shevchenko1-8/+3
This fixes a bug when dwc3_pci_register_phys() fails and leaves device enabled. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-15usb: dwc3: no need to initialize ret variableAndy Shevchenko5-11/+9
First usage of ret variable will re-write initial value. Thus, there is no need to initialize it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-25usb: dwc3: gadget: pretty print Generic CMDsFelipe Balbi1-0/+29
this makes it slightly easier to read generic CMD logs. It also helps make sure we're sending proper parameters for each command. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-25usb: dwc3: gadget: pretty print link statesFelipe Balbi1-3/+41
this makes it slightly easier to read link state change interrupt logs. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-25usb: dwc3: gadget: print both cmd string and numberFelipe Balbi1-2/+2
That way it's easy for humans looking at dmesg and humans(?) looking at Databooks. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: dwc3: exynos: Make provision for vdd regulatorsVivek Gautam1-2/+49
Facilitate getting required 3.3V and 1.0V VDD supply for DWC3 controller on Exynos. With patches for regulators' nodes merged in 3.15: c8c253f ARM: dts: Add regulator entries to smdk5420 275dcd2 ARM: dts: add max77686 pmic node for smdk5250, certain perripherals will now need to ensure that, they request VDD regulators in their drivers, and enable them so as to make them working. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: dwc3: add glue layer dependenciesJean Delvare1-1/+3
Glue layers for the DWC3 driver only make sense on specific platforms. Add dependencies so that they are not built where they aren't needed. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: phy: rename <linux/usb/usb_phy_gen_xceiv.h> to ↵Felipe Balbi2-2/+2
<linux/usb/usb_phy_generic.h> now that all functions match the driver name, the only missing piece is to rename the header file itself. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: phy: rename usb_nop_xceiv to usb_phy_genericFelipe Balbi2-6/+6
no functional changes, just renaming the function in order to make it slightly clearer what it should be used for, also matching the driver name. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: dwc3: core: refactor mode initialization to its own functionFelipe Balbi1-66/+67
Move mode (Host, Peripheral, OTG) initialization to its own function in order to decrease the size of our probe() routine. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-17usb: dwc3: core: refactor PHY initializationFelipe Balbi1-54/+66
our probe() routine is too large and we can easily refactor PHY-related code out to another function to make it slightly less painful to read. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-16usb: dwc3: gadget: clear stall when disabling endpointFelipe Balbi1-0/+4
so it seems like DWC3 IP doesn't clear stalls automatically when we disable an endpoint, because of that, we _must_ make sure stalls are cleared before clearing the proper bit in DALEPENA register. Cc: <stable@vger.kernel.org> # v3.4+ Reported-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-16usb: dwc3: core: Fix gadget for system suspend/resumeRoger Quadros1-1/+1
During system resume, if the event buffers are not setup before the gadget controller starts then we start with invalid context and this can lead to bus access errors. This is especially true for platforms that loose the controller context during system suspend. e.g. AM437x. The following backtrace was found when the system is suspended and resumed with g_zero loaded on AM437x-evm (USB cable connected to host all the while). [ 120.981506] WARNING: CPU: 0 PID: 1656 at drivers/bus/omap_l3_noc.c:137 l3_interrupt_handler+0x198/0x28c() [ 120.981514] L3 custom error: MASTER:USB0 WR TARGET:GPMC [ 120.981638] Modules linked in: g_mass_storage usb_f_mass_storage libcomposite configfs bufferclass_ti(O) omaplfb(O) cryptodev(O) dwc3 snd_soc_evm snd_soc_omap snd_pe [ 120.981659] CPU: 0 PID: 1656 Comm: sh Tainted: G O 3.12.10-gc559824 #1 [ 120.981669] Backtrace: [ 120.981705] [<c0017880>] (dump_backtrace+0x0/0x10c) from [<c0017a1c>] (show_stack+0x18/0x1c) [ 120.981730] r6:c02819ac r5:00000009 r4:ec137cb8 r3:00000000 [ 120.981767] [<c0017a04>] (show_stack+0x0/0x1c) from [<c056c0b0>] (dump_stack+0x20/0x28) [ 120.981802] [<c056c090>] (dump_stack+0x0/0x28) from [<c0046d08>] (warn_slowpath_common+0x70/0x90) [ 120.981830] [<c0046c98>] (warn_slowpath_common+0x0/0x90) from [<c0046dcc>] (warn_slowpath_fmt+0x38/0x40) [ 120.981856] r8:c0855eb0 r7:00000002 r6:f1000700 r5:00000007 r4:80080003 [ 120.981886] [<c0046d94>] (warn_slowpath_fmt+0x0/0x40) from [<c02819ac>] (l3_interrupt_handler+0x198/0x28c) [ 120.981900] r3:c0801ab8 r2:c06cb354 [ 120.981936] [<c0281814>] (l3_interrupt_handler+0x0/0x28c) from [<c007162c>] (handle_irq_event_percpu+0x54/0x1b8) [ 120.981962] [<c00715d8>] (handle_irq_event_percpu+0x0/0x1b8) from [<c00717c0>] (handle_irq_event+0x30/0x40) [ 120.981993] [<c0071790>] (handle_irq_event+0x0/0x40) from [<c0074058>] (handle_fasteoi_irq+0x74/0x128) [ 120.982006] r4:ed0056c0 r3:00000000 [ 120.982033] [<c0073fe4>] (handle_fasteoi_irq+0x0/0x128) from [<c0070f34>] (generic_handle_irq+0x28/0x38) [ 120.982046] r4:0000002a r3:c0073fe4 [ 120.982085] [<c0070f0c>] (generic_handle_irq+0x0/0x38) from [<c0015560>] (handle_IRQ+0x38/0x8c) [ 120.982098] r4:c080137c r3:00000182 [ 120.982124] [<c0015528>] (handle_IRQ+0x0/0x8c) from [<c00087e0>] (gic_handle_irq+0x30/0x5c) [ 120.982145] r6:ec137dd0 r5:c07ac480 r4:fa24010c r3:00000100 [ 120.982169] [<c00087b0>] (gic_handle_irq+0x0/0x5c) from [<c056fcc0>] (__irq_svc+0x40/0x54) [ 120.982179] Exception stack(0xec137dd0 to 0xec137e18) [ 120.982195] 7dc0: 00000000 a00001d3 00000000 00000004 [ 120.982216] 7de0: a0000153 ec1d9010 c080de90 ec137e30 c080debc 00000000 ed756e44 ec137e2c [ 120.982232] 7e00: ec137de0 ec137e18 bf1150e4 bf115474 60000153 ffffffff [ 120.982253] r7:ec137e04 r6:ffffffff r5:60000153 r4:bf115474 [ 120.982327] [<bf115438>] (dwc3_complete+0x0/0x40 [dwc3]) from [<c0338f50>] (dpm_complete+0xd4/0x19c) [ 120.982341] r5:ed756e10 r4:ed756e64 [ 120.982370] [<c0338e7c>] (dpm_complete+0x0/0x19c) from [<c0339034>] (dpm_resume_end+0x1c/0x20) [ 120.982400] [<c0339018>] (dpm_resume_end+0x0/0x20) from [<c006d4ec>] (suspend_devices_and_enter+0x118/0x33c) [ 120.982412] r4:c0833da4 r3:00000000 [ 120.982436] [<c006d3d4>] (suspend_devices_and_enter+0x0/0x33c) from [<c006d928>] (pm_suspend+0x218/0x254) [ 120.982458] [<c006d710>] (pm_suspend+0x0/0x254) from [<c006c594>] (state_store+0x70/0xc0) [ 120.982478] r6:c057a6cc r5:c06a8320 r4:00000003 r3:0000006d [ 120.982515] [<c006c524>] (state_store+0x0/0xc0) from [<c0264cc0>] (kobj_attr_store+0x1c/0x28) [ 120.982546] [<c0264ca4>] (kobj_attr_store+0x0/0x28) from [<c012ccb8>] (sysfs_write_file+0x170/0x1a4) [ 120.982583] [<c012cb48>] (sysfs_write_file+0x0/0x1a4) from [<c00d17e4>] (vfs_write+0xb8/0x190) [ 120.982611] [<c00d172c>] (vfs_write+0x0/0x190) from [<c00d1bf8>] (SyS_write+0x44/0x78) [ 120.982641] [<c00d1bb4>] (SyS_write+0x0/0x78) from [<c0014660>] (ret_fast_syscall+0x0/0x30) Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-16usb: dwc3: gadget: Iterate only over valid endpointsJack Pham1-8/+4
Make dwc3_gadget_resize_tx_fifos() iterate only over IN endpoints that are actually present, based on the num_in_eps parameter. This terminates the loop so as to prevent dereferencing a potential NULL dwc->eps[i] where i >= (num_in_eps + num_out_eps). Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-02Merge tag 'usb-3.15-rc1' of ↵Linus Torvalds5-101/+455
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg KH: "Here's the big USB pull request for 3.15-rc1. The normal set of patches, lots of controller driver updates, and a smattering of individual USB driver updates as well. All have been in linux-next for a while" * tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (249 commits) xhci: Transition maintainership to Mathias Nyman. USB: disable reset-resume when USB_QUIRK_RESET is set USB: unbind all interfaces before rebinding any usb: phy: Add ulpi IDs for SMSC USB3320 and TI TUSB1210 usb: gadget: tcm_usb_gadget: stop format strings usb: gadget: f_fs: add missing spinlock and mutex unlock usb: gadget: composite: switch over to ERR_CAST() usb: gadget: inode: switch over to memdup_user() usb: gadget: f_subset: switch over to PTR_RET usb: gadget: lpc32xx_udc: fix wrong clk_put() sequence USB: keyspan: remove dead debugging code USB: serial: add missing newlines to dev_<level> messages. USB: serial: add missing braces USB: serial: continue to write on errors USB: serial: continue to read on errors USB: serial: make bulk_out_size a lower limit USB: cypress_m8: fix potential scheduling while atomic devicetree: bindings: document lsi,zevio-usb usb: chipidea: add support for USB OTG controller on LSI Zevio SoCs usb: chipidea: imx: Use dev_name() for ci_hdrc name to distinguish USBs ...
2014-03-19extcon: Move OF helper function to extcon core and change function nameChanwoo Choi1-2/+1
This patch move simply OF helper function to extcon core and change function name as following: - of_extcon_get_extcon_dev() -> extcon_get_edev_by_phandle() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com>
2014-03-07usb: dwc3: gadget: remove known conditionsDan Carpenter1-4/+2
We know what "value" is and it upsets static checkers that we appear to have doubts about it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-07usb: dwc3: gadget: cut and paste fixups in suspend/resumeDan Carpenter1-2/+2
These were cut and paste from the ->disconnect function. Fixes commit 30d577b9bcc4 ('usb: dwc3: gadget: call gadget driver's ->suspend/->resume') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-06usb: dwc3: adapt dwc3 core to use Generic PHY FrameworkKishon Vijay Abraham I2-3/+84
Adapted dwc3 core to use the Generic PHY Framework. So for init, exit, power_on and power_off the following APIs are used phy_init(), phy_exit(), phy_power_on() and phy_power_off(). However using the old USB phy library wont be removed till the PHYs of all other SoC's using dwc3 core is adapted to the Generic PHY Framework. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-06usb: dwc3: core: support optional PHYsKishon Vijay Abraham I1-20/+14
Since PHYs for dwc3 is optional (not all SoCs having PHYs for DWC3 should be programmed), do not return from probe if the USB PHY library returns -ENODEV as that indicates the platform does not have a programmable PHY. While this can be considered as a temporary fix, a long term solution would be to add 'nop' PHY for platforms that does not have programmable PHY. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-06usb: dwc3: define more revisionsFelipe Balbi1-0/+3
few new revisions of the core have been released, add them to our list of revisions so we can apply workarounds if necessary. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-06usb: dwc3: fix randconfig build errorsFelipe Balbi2-13/+33
commit 388e5c5 (usb: dwc3: remove dwc3 dependency on host AND gadget.) created the possibility for host-only and peripheral-only dwc3 builds but left a possible randconfig build error when host-only builds are selected. Cc: <stable@vger.kernel.org> # v3.8+ Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-06usb: dwc3: gadget: pre-start Stream transfers when they're queuedFelipe Balbi1-0/+17
we need to pre-start stream transfers otherwise we will never know when to start them. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-06usb: dwc3: gadget: call gadget driver's ->suspend/->resumeFelipe Balbi1-0/+35
When going into bus suspend/resume we _must_ call gadget driver's ->suspend/->resume callbacks accordingly. This patch implements that very feature which has been missing forever. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-06usb: dwc3: gadget: add 'force' argument to stop_active_transferPaul Zimmerman1-7/+8
It's not always we need to force a transfer to be removed from the core's internal cache. This extra argument will help differentiating those two cases. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-06usb: dwc3: gadget: make sure HIRD threshold is 0 in superspeedFelipe Balbi1-0/+4
During superspeed, HIRD threshold should always be zero. Curent driver wasn't making sure that was the case. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-06usb: dwc3: gadget: set KEEP_CONNECT in case of hibernationFelipe Balbi1-4/+14
if we have hibernation configured, Databook instructs us to set KEEP_CONNECT bit together with RUN_STOP bit, in step 9 of section 12.3.6.1 Initialization for Hibernation Support. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-06usb: dwc3: core: fix indentationFelipe Balbi1-1/+1
no functional changes, just converting spaces into tab. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-06usb: dwc3: core: allocate scratch buffersFelipe Balbi2-0/+111
We must read HWPARAMS4 register to figure out how many scratch buffers we should allocate. Later patch will use "Set Scratchpad Buffer Array" command to pass the pointer to the IP so it can be used during hibernation. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05usb: dwc3: gadget: add a 'restore' argument to set_ep_configPaul Zimmerman1-10/+22
That argument will be used in later patches when we have working hibernation support. For now, always pass it as false. The idea of this patch is to decrease to size of following patches and slowly add hibernation building blocks to the gadget side of dwc3 so that it becomes very easy to review the actual hibernation code. [ balbi@ti.com : rewrote patch on top of current tree. Added commit log. ] Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05usb: dwc3: gadget: implement dwc3_gadget_get_link_statePaul Zimmerman2-0/+17
This function will be used during hibernation to get the current link state. It will be needed at least for Hibernation support. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05usb: dwc3: add 'saved_state' field to dwc3_ep structurePaul Zimmerman1-0/+2
This extra field will save endpoint state when we're about to enter hibernation. It will be used later to restore the endpoint state when resuming. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05usb: dwc3: add has_hibernation flagFelipe Balbi1-0/+2
this will tell driver that this version of the core was configured with hibernation feature enabled. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05usb: dwc3: cleanup struct dwc3Felipe Balbi1-19/+24
move 1-bit flags to the bottom of the structure, sort all bit flags alphabetically, add documentation which was missing. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05usb: dwc3: workaround: bogus hibernation eventsFelipe Balbi1-0/+31
Revision 2.20a of the core has a known issue which would generate bogus hibernation events _and_ random failures on USB CV TD.9.23 test case. The suggested workaround is to ignore hibernation events which don't match currently connected speed. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05usb: dwc3: workaround: clock gating issuesFelipe Balbi1-9/+27
Revisions between 2.10a and 2.50a (included) have a known issue which may cause xHCI compliance tests to fail and/or quality issues with Isochronous transactions. Note that this issue only impacts certain configurations of those revisions, namely the ones which have clock gating enabled. The suggested workaround is to disable clock gating in known broken revisions, make sure HW LPM is disabled and set GCTL.SOFITPSYNC to 1. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05usb: dwc3: core: define bit 10 of GCTL registerFelipe Balbi1-0/+1
This bit is necessary for implemeting workaround for known issue with some revisions of this core. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05usb: dwc3: gadget: always enable IOC on bulk/interrupt transfersFelipe Balbi1-6/+3
by setting IOC always, we can recycle TRBs a lot sooner at the expense of some increased CPU load. The extra load seems to be quite minimal on OMAP5 devices (instead of 1 IRQ for one MSC transfer, we get CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS). Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-20usb: dwc3: fix wrong bit mask in dwc3_event_devtHuang Rui1-3/+3
Around DWC USB3 2.30a release another bit has been added to the Device-Specific Event (DEVT) Event Information (EvtInfo) bitfield. Because of that, what used to be 8 bits long, has become 9 bits long. Per dwc3 2.30a+ spec in the Device-Specific Event (DEVT), the field of Event Information Bits(EvtInfo) uses [24:16] bits, and it has 9 bits not 8 bits. And the following reserved field uses [31:25] bits not [31:24] bits, and it has 7 bits. So in dwc3_event_devt, the bit mask should be: event_info [24:16] 9 bits reserved31_25 [31:25] 7 bits This patch makes sure that newer core releases will work fine with Linux and that we will decode the event information properly on new core releases. [ balbi@ti.com : improve commit log a bit ] Cc: <stable@vger.kernel.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-18usb: dwc3: omap: don't check resource with devm_ioremap_resourceWolfram Sang1-5/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-23Merge tag 'v3.13-rc5' into nextFelipe Balbi1-3/+5
Linux 3.13-rc5 * tag 'v3.13-rc5': (231 commits) Linux 3.13-rc5 aio: clean up and fix aio_setup_ring page mapping aio/migratepages: make aio migrate pages sane aio: fix kioctx leak introduced by "aio: Fix a trinity splat" Don't set the INITRD_COMPRESS environment variable automatically mm: fix build of split ptlock code pstore: Don't allow high traffic options on fragile devices mm: do not allocate page->ptl dynamically, if spinlock_t fits to long mm: page_alloc: revert NUMA aspect of fair allocation policy Revert "mm: page_alloc: exclude unreclaimable allocations from zone fairness policy" mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) support qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure target: Remove extra percpu_ref_init arm64: ptrace: avoid using HW_BREAKPOINT_EMPTY for disabled events ARC: Allow conditional multiple inclusion of uapi/asm/unistd.h target/file: Update hw_max_sectors based on current block_size iser-target: Move INIT_WORK setup into isert_create_device_ib_res iscsi-target: Fix incorrect np->np_thread NULL assignment mm/hugetlb: check for pte NULL pointer in __page_check_address() fix build with make 3.80 ... Conflicts: drivers/usb/phy/Kconfig
2013-12-19usb: dwc3: fix the glue drivers using the nop phyHeikki Krogerus2-0/+2
The reset_gpio member of the usb_phy_gen_xceiv_platform_data structure needs the have negative value or phy-generic's probe will fail unless DT is used. 0 is a valid gpio number. This fixes an issue where phy-generic fails to probe with message: "usb_phy_gen_xceiv.0: Error requesting RESET GPIO 0". Cc: <stable@vger.kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-19Merge tag 'v3.13-rc4' into nextFelipe Balbi2-4/+3
Linux 3.13-rc4 * tag 'v3.13-rc4': (1001 commits) Linux 3.13-rc4 null_blk: mem garbage on NUMA systems during init radeon_pm: fix oops in hwmon_attributes_visible() and radeon_hwmon_show_temp_thresh() Revert "selinux: consider filesystem subtype in policies" igb: Fix for issue where values could be too high for udelay function. i40e: fix null dereference ARM: fix asm/memory.h build error dm array: fix a reference counting bug in shadow_ablock dm space map: disallow decrementing a reference count below zero mm: memcg: do not allow task about to OOM kill to bypass the limit mm: memcg: fix race condition between memcg teardown and swapin thp: move preallocated PTE page table on move_huge_pmd() mfd/rtc: s5m: fix register updating by adding regmap for RTC rtc: s5m: enable IRQ wake during suspend rtc: s5m: limit endless loop waiting for register update rtc: s5m: fix unsuccesful IRQ request during probe drivers/rtc/rtc-s5m.c: fix info->rtc assignment include/linux/kernel.h: make might_fault() a nop for !MMU drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrap procfs: also fix proc_reg_get_unmapped_area() for !MMU case ... Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-17usb: gadget: add "maxpacket_limit" field to struct usb_epRobert Baldyga1-2/+2
This patch adds "maxpacket_limit" to struct usb_ep. This field contains maximum value of maxpacket supported by driver, and is set in driver probe. This value should be used by autoconfig() function, because value of field "maxpacket" is set to value from endpoint descriptor when endpoint becomes enabled. So when autoconfig() function will be called again for this endpoint, "maxpacket" value will contain wMaxPacketSize from descriptior instead of maximum packet size for this endpoint. For this reason this patch adds new field "maxpacket_limit" which contains value of maximum packet size (which defines maximum endpoint capabilities). This value is used in ep_matches() function used by autoconfig(). Value of "maxpacket_limit" should be set in UDC driver probe function, using usb_ep_set_maxpacket_limit() function, defined in gadget.h. This function set choosen value to both "maxpacket_limit" and "maxpacket" fields. This patch modifies UDC drivers by adding support for maxpacket_limit. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: dwc3: add Keystone specific glue layerWingMan Kwok3-0/+210
Add Keystone platform specific glue layer to support USB3 Host mode. [ balbi@ti.com : fix order of clk_disable() and platform_device_unregister() ] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 09:45:05 +0300