summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc3
AgeCommit message (Collapse)AuthorFilesLines
2019-09-02Merge tag 'usb-for-v5.4' of ↵Greg Kroah-Hartman10-314/+83
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: Changes for v5.4 merge window With only 45 non-merge commits, we have a small merge window from the Gadget perspective. The biggest change here is the addition of the Cadence USB3 DRD Driver. All other changes are small, non-critical fixes or smaller new features like the improvement to BESL handling in dwc3. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> * tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (45 commits) usb: gadget: net2280: Add workaround for AB chip Errata 11 usb: gadget: net2280: Move all "ll" registers in one structure usb: dwc3: gadget: Workaround Mirosoft's BESL check usb:cdns3 Fix for stuck packets in on-chip OUT buffer. usb: cdns3: Add Cadence USB3 DRD Driver usb: common: Simplify usb_decode_get_set_descriptor function. usb: common: Patch simplify usb_decode_set_clear_feature function. usb: common: Separated decoding functions from dwc3 driver. dt-bindings: add binding for USBSS-DRD controller. usb: gadget: composite: Set recommended BESL values usb: dwc3: gadget: Set BESL config parameter usb: dwc3: Separate field holding multiple properties usb: gadget: Export recommended BESL values usb: phy: phy-fsl-usb: Make structure fsl_otg_initdata constant usb: udc: lpc32xx: silence fall-through warning usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables usb: udc: lpc32xx: remove set but not used 3 variables usb: gadget: udc: core: Fix segfault if udc_bind_to_driver() for pending driver fails usb: dwc3: st: Add of_dev_put() in probe function usb: dwc3: st: Add of_node_put() before return in probe function ...
2019-08-30usb: dwc3: gadget: Workaround Mirosoft's BESL checkThinh Nguyen1-2/+12
While testing our host system using Microsoft's usb stack against our gadget for various BESL values, we found an issue with their usb stack when the recommended baseline BESL value is 0 (125us) or when the deep BESL is 1 or less. The Windows host will issue a usb reset immediately after it receives the extended BOS descriptor and the enumeration will fail after a few attempts. To keep compatibility with Microsoft's host usb stack, let's workaround this issue by using the recommended baseline BESL of 1 (or 150us) and clamp the deep BESL value within 2 to 15. This was tested against Windows 10 build 18956. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-29usb: common: Separated decoding functions from dwc3 driver.Pawel Laszczak2-253/+1
Patch moves some decoding functions from driver/usb/dwc3/debug.h driver to driver/usb/common/debug.c file. These moved functions include: dwc3_decode_get_status dwc3_decode_set_clear_feature dwc3_decode_set_address dwc3_decode_get_set_descriptor dwc3_decode_get_configuration dwc3_decode_set_configuration dwc3_decode_get_intf dwc3_decode_set_intf dwc3_decode_synch_frame dwc3_decode_set_sel dwc3_decode_set_isoch_delay dwc3_decode_ctrl These functions are used also in inroduced cdns3 driver. All functions prefixes were changed from dwc3 to usb. Also, function's parameters has been extended according to the name of fields in standard SETUP packet. Additionally, patch adds usb_decode_ctrl function to include/linux/usb/ch9.h file. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-28usb: dwc3: gadget: Set BESL config parameterThinh Nguyen1-0/+10
When operating with LPM signals, the controller asserts the deep low-power signal (utmi_l1_suspend_n) to the phy when the BESL value of the LPM token is equal to or greater than DCTL.HIRD_Thres[3:0] (and with DCTL.HIRD_Thres[4] set). Otherwise, the shallow low-power signal (utmi_sleep_n) is asserted. Set the recommended deep BESL equal to the controller's DCTL.HIRD_Thres[3:0] setting, and set the baseline BESL to 0 for the shallow low-power signal. This maximizes the opportunity for L1 residency and optimizes power savings. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-28usb: dwc3: Separate field holding multiple propertiesThinh Nguyen2-3/+3
dwc->hird_threshold field should store "snps,hird_threshold" property only and not a combination of multiple properties. Remove the value of "snps,is-utmi-l1-suspend" property from the field dwc->hird_threshold. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-28usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disablesNeil Armstrong1-1/+13
When going in suspend, in Device mode, then resuming back leads to the following: unbalanced disables for USB_PWR_EN WARNING: CPU: 0 PID: 163 at ../drivers/regulator/core.c:2590 _regulator_disable+0x104/0x180 Hardware name: Amlogic Meson G12A U200 Development Board (DT) [...] pc : _regulator_disable+0x104/0x180 lr : _regulator_disable+0x104/0x180 [...] Call trace: _regulator_disable+0x104/0x180 regulator_disable+0x40/0x78 dwc3_meson_g12a_otg_mode_set+0x84/0xb0 dwc3_meson_g12a_irq_thread+0x58/0xb8 irq_thread_fn+0x28/0x80 irq_thread+0x118/0x1b8 kthread+0xf4/0x120 ret_from_fork+0x10/0x18 This disables the regulator if enabled on suspend, and the reverse on resume. Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue") Tested-by: Kevin Hilman <khilman@baylibre.com> Reported-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-28usb: dwc3: st: Add of_dev_put() in probe functionNishka Dasgupta1-0/+1
In function st_dwc3_probe, variable child_pdev takes the value returned by of_find_device_by_node, which gets a device pointer but does not put it. If child_pdev is not put before the probe function returns, it may cause a reference leak. Hence put child_pdev after its last usage. Issue found with Coccinelle. Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-28usb: dwc3: st: Add of_node_put() before return in probe functionNishka Dasgupta1-3/+6
The local variable child in the function st_dwc3_probe takes the return value of of_get_child_by_name, which gets a node and does not put it. If the function returns without releasing child, this could cause a memory error. Hence put child as soon as there is no more use for it. Also create a new label, err_node_put, just before label undo_softreset; so that err_node_put puts child. In between initialisation of child and its first put, modify all statements that go to undo_softreset to now go to err_node_put instead, from where they can fall through to undo_softreset. Issue found with Coccinelle. Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-28usb: dwc3: don't set gadget->is_otg flagRoger Quadros1-1/+0
This reverts commit 6a4290cc28be1 ("usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.") We don't yet support any of the OTG mechanisms (HNP/SRP/ADP) and are not setting gadget->otg_caps, so don't set gadget->is_otg flag. If we do then we end up publishing a OTG1.0 descriptor in the gadget descriptor which causes device enumeration to fail if we are connected to a host with CONFIG_USB_OTG enabled. Host side log without this patch [ 96.720453] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 96.901391] usb 1-1: Dual-Role OTG device on non-HNP port [ 96.907552] usb 1-1: set a_alt_hnp_support failed: -32 [ 97.060447] usb 1-1: new high-speed USB device number 3 using xhci-hcd [ 97.241378] usb 1-1: Dual-Role OTG device on non-HNP port [ 97.247536] usb 1-1: set a_alt_hnp_support failed: -32 [ 97.253606] usb usb1-port1: attempt power cycle [ 97.960449] usb 1-1: new high-speed USB device number 4 using xhci-hcd [ 98.141383] usb 1-1: Dual-Role OTG device on non-HNP port [ 98.147540] usb 1-1: set a_alt_hnp_support failed: -32 [ 98.300453] usb 1-1: new high-speed USB device number 5 using xhci-hcd [ 98.481391] usb 1-1: Dual-Role OTG device on non-HNP port [ 98.487545] usb 1-1: set a_alt_hnp_support failed: -32 [ 98.493532] usb usb1-port1: unable to enumerate USB device Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-09usb: dwc3: Use clk_bulk_prepare_enable()Andrey Smirnov1-18/+5
Use clk_bulk_prepare_enable() and clk_bulk_disable_unprepare() to simplify code a bit. No functional change intended. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-09usb: dwc3: Use devres to get clocksAndrey Smirnov1-5/+2
Use devres to get clocks and drop explicit clock freeing. No functional change intended. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-09usb: dwc3: remove generic PHYs forwarding for XHCI deviceMarek Szyprowski1-18/+4
Commit 08f871a3aca2 ("usb: dwc3: host: convey the PHYs to xhci") added forwarding of the generic PHYs from DWC3 core to the instantiated XHCI-plat device. However XHCI(-plat) driver never gained support for generic PHYs, thus the lookup added by that commit is never used. In meantime the commit d64ff406e51e ("usb: dwc3: use bus->sysdev for DMA configuration") incorrectly changed the device used for creating lookup, making the lookup useless and generic PHYs inaccessible from XHCI device. However since commit 178a0bce05cb ("usb: core: hcd: integrate the PHY wrapper into the HCD core") USB HCD already handles generic PHYs acquired from the HCD's 'sysdev', which in this case is DWC3 core device. This means that creating any custom lookup entries for XHCI driver is no longer needed and can be simply removed. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-09usb: dwc3: Update soft-reset wait polling rateThinh Nguyen2-5/+20
Starting from DWC_usb31 version 1.90a and later, the DCTL.CSFRST bit will not be cleared until after all the internal clocks are synchronized during soft-reset. This may take a little more than 50ms. Set the polling rate at 20ms instead. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-09usb: dwc3: omap: squash include/linux/platform_data/dwc3-omap.hMasahiro Yamada1-1/+6
This enum is only used in drivers/usb/dwc3/dwc3-omap3.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-09usb: dwc3: Switch to use device_property_count_u32()Andy Shevchenko1-2/+1
Use use device_property_count_u32() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-09usb: dwc3: keystone: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-09usb: dwc3: omap: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-09usb: dwc3: meson-g12a: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-05usb: dwc3: meson-g12a: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20190802130408.20336-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30usb: Remove dev_err() usage after platform_get_irq()Stephen Boyd2-4/+1
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-47-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25usb: dwc3: Switch to use device_property_count_u32()Andy Shevchenko1-2/+1
Use use device_property_count_u32() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190723191704.67945-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-04Revert "usb:gadget Separated decoding functions from dwc3 driver."Greg Kroah-Hartman2-1/+253
This reverts commit 3db1b636c07e15ff7410db782832dc2e7ffd2bce. It's broken. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Felipe Balbi <balbi@kernel.org> Cc: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03usb:gadget Separated decoding functions from dwc3 driver.Pawel Laszczak2-253/+1
Patch moves some decoding functions from driver/usb/dwc3/debug.h driver to driver/usb/gadget/debug.c file. These moved functions include: dwc3_decode_get_status dwc3_decode_set_clear_feature dwc3_decode_set_address dwc3_decode_get_set_descriptor dwc3_decode_get_configuration dwc3_decode_set_configuration dwc3_decode_get_intf dwc3_decode_set_intf dwc3_decode_synch_frame dwc3_decode_set_sel dwc3_decode_set_isoch_delay dwc3_decode_ctrl These functions are used also in inroduced cdns3 driver. All functions prefixes were changed from dwc3 to usb. Also, function's parameters has been extended according to the name of fields in standard SETUP packet. Additionally, patch adds usb_decode_ctrl function to include/linux/usb/gadget.h file. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-07-03usb: dwc3: pci: add support for TigerLake DevicesFelipe Balbi1-0/+4
This patch adds the necessary PCI ID for TGP-LP devices. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-20usb: dwc3: remove unused @lock member of dwc3_ep structChunfeng Yun2-4/+0
The member @lock of dwc3_ep struct is only initialized, and not used elsewhere, so remove it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-20usb: dwc3: pci: Add Support for Intel Elkhart Lake DevicesFelipe Balbi1-0/+4
This patch simply adds a new PCI Device ID Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-18usb: dwc3: gadget: Add support for disabling U1 and U2 entriesAnurag Kumar Vulisha5-1/+42
Gadget applications may have a requirement to disable the U1 and U2 entry based on the usecase. Below are few usecases where the disabling U1/U2 entries may be possible. Usecase 1: When combining dwc3 with an redriver for a USB Type-C device solution, it sometimes have problems with leaving U1/U2 for certain hosts, resulting in link training errors and reconnects. For this U1/U2 state entries may be avoided. Usecase 2: When performing performance benchmarking on mass storage gadget the U1 and U2 entries can be disabled. Usecase 3: When periodic transfers like ISOC transfers are used with bInterval of 1 which doesn't require the link to enter into U1 or U2 state entry (since ping is issued from host for every uframe interval). In this case the U1 and U2 entry can be disabled. Disablement of U1/U2 can be done by setting U1DevExitLat and U2DevExitLat values to 0 in the BOS descriptor. Host on seeing 0 value for U1DevExitLat and U2DevExitLat, it doesn't send SET_SEL requests to the gadget. There may be some hosts which may send SET_SEL requests even after seeing 0 in the UxDevExitLat of BOS descriptor. To aviod U1/U2 entries for these type of hosts, dwc3 controller can be programmed to reject those U1/U2 requests by not enabling ACCEPTUxENA bits in DCTL register. This patch updates the same. Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com> Signed-off-by: Claus H. Stovgaard <cst@phaseone.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-18usb: dwc3: qcom: Use of_clk_get_parent_count()Kefeng Wang1-2/+1
Use of_clk_get_parent_count() instead of open coding. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-18usb: dwc3: Fix core validation in probe, move after clocks are enabledEnric Balletbo i Serra1-5/+7
The required clocks needs to be enabled before the first register access. After commit fe8abf332b8f ("usb: dwc3: support clocks and resets for DWC3 core"), this happens when the dwc3_core_is_valid function is called, but the mentioned commit adds that call in the wrong place, before the clocks are enabled. So, move that call after the clk_bulk_enable() to ensure the clocks are enabled and the reset deasserted. I detected this while, as experiment, I tried to move the clocks and resets from the glue layer to the DWC3 core on a Samsung Chromebook Plus. That was not detected before because, in most cases, the glue layer initializes SoC-specific things and then populates the child "snps,dwc3" with those clocks already enabled. Fixes: b873e2d0ea1ef ("usb: dwc3: Do core validation early on probe") Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-18usb: dwc3: qcom: Improve error handlingLee Jones1-0/+3
dwc3_qcom_clk_init() is called with of_count_phandle_with_args() as an argument. If of_count_phandle_with_args() returns an error, the number of clocks will be a negative value and will lead to undefined behaviour. Ensure we check for an error before attempting to blindly use the value. Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-18usb: dwc3: qcom: Start USB in 'host mode' on the SDM845Lee Jones1-0/+12
When booting with Device Tree, the current default boot configuration table option, the request to boot via 'host mode' comes from the 'dr_mode' property. A property of the same name can be used inside ACPI tables too. However it is missing from the SDM845's ACPI tables so we have to supply this information using Platform Device Properties instead. This does not change the behaviour of any currently supported devices. The property is only set on ACPI enabled platforms, thus for H/W booting DT, unless a 'dr_mode' property is present, the default is still OTG (On-The-Go) as per [0]. Any new ACPI devices added will also be able to over-ride this implementation by providing a 'dr_mode' property in their ACPI tables. In cases where 'dr_mode' is omitted from the tables AND 'host mode' should not be the default (very unlikely), then we will have to add some way of choosing between them at run time - most likely by ACPI HID. [0] Documentation/devicetree/bindings/usb/generic.txt Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-18usb: dwc3: qcom: Add support for booting with ACPILee Jones2-29/+179
In Linux, the DWC3 core exists as its own independent platform device. Thus when describing relationships in Device Tree, the current default boot configuration table option, the DWC3 core often resides as a child of the platform specific node. Both of which are given their own address space descriptions and the drivers can be mostly agnostic to each other. However, other Operating Systems have taken a more monolithic approach, which is evident in the configuration ACPI tables for the Qualcomm Snapdragon SDM850, where all DWC3 (core and platform) components are described under a single IO memory region. To ensure successful booting using the supplied ACPI tables, we need to devise a way to chop up the address regions provided and subsequently register the DWC3 core with the resultant information, which is precisely what this patch aims to achieve. Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-18usb: dwc3: meson-g12a: Add support for IRQ based OTG switchingNeil Armstrong1-5/+31
Add support for the OTG ID change interrupt to switch between Host and Device mode. Tested on the Hardkernel Odroid-N2 board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-09Merge tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-1/+2
Pull drm updates from Dave Airlie: "This has two exciting community drivers for ARM Mali accelerators. Since ARM has never been open source friendly on the GPU side of the house, the community has had to create open source drivers for the Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx series. Well done to all involved and hopefully this will help ARM head in the right direction. There is also now the ability if you don't have any of the legacy drivers enabled (pre-KMS) to remove all the pre-KMS support code from the core drm, this saves 10% or so in codesize on my machine. i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo moves out of staging. There are also some rcar-du patches which crossover with media tree but all should be acked by Mauro. Summary: uapi changes: - Colorspace connector property - fourcc - new YUV formts - timeline sync objects initially merged - expose FB_DAMAGE_CLIPS to atomic userspace new drivers: - vboxvideo: moved out of staging - aspeed: ASPEED SoC BMC chip display support - lima: ARM Mali4xx GPU acceleration driver support - panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support core: - component helper docs - unplugging fixes - devm device init - MIPI/DSI rate control - shmem backed gem objects - connector, display_info, edid_quirks cleanups - dma_buf fence chain support - 64-bit dma-fence seqno comparison fixes - move initial fb config code to core - gem fence array helpers for Lima - ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size) - lease fixes ttm: - unified DRM_FILE_PAGE_OFFSET handling - Account for kernel allocations in kernel zone only panel: - OSD070T1718-19TS panel support - panel-tpo-td028ttec1 backlight support - Ronbo RB070D30 MIPI/DSI - Feiyang FY07024DI26A30-D MIPI-DSI panel - Rocktech jh057n00900 MIPI-DSI panel i915: - Comet Lake (Gen9) PCI IDs - Updated Icelake PCI IDs - Elkhartlake (Gen11) support - DP MST property addtions - plane and watermark fixes - Icelake port sync and VEBOX disable fixes - struct_mutex usage reduction - Icelake gamma fix - GuC reset fixes - make mmap more asynchronous - sound display power well race fixes - DDI/MIPI-DSI clocks for Icelake - Icelake RPS frequency changing support - Icelake workarounds amdgpu: - Use HMM for userptr - vega20 experimental smu11 support - RAS support for vega20 - BACO support for vega12 + fixes for vega20 - reworked IH interrupt handling - amdkfd RAS support - Freesync improvements - initial timeline sync object support - DC Z ordering fixes - NV12 planes support - colorspace properties for planes= - eDP opts if eDP already initialized nouveau: - misc fixes etnaviv: - misc fixes msm: - GPU zap shader support expansion - robustness ABI addition exynos: - Logging cleanups tegra: - Shared reset fix - CPU cache maintenance fix cirrus: - driver rewritten using simple helpers meson: - G12A support vmwgfx: - Resource dirtying management improvements - Userspace logging improvements virtio: - PRIME fixes rockchip: - rk3066 hdmi support sun4i: - DSI burst mode support vc4: - load tracker to detect underflow v3d: - v3d v4.2 support malidp: - initial Mali D71 support in komeda driver tfp410: - omap related improvement omapdrm: - drm bridge/panel support - drop some omap specific panels rcar-du: - Display writeback support" * tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits) drm/msm/a6xx: No zap shader is not an error drm/cma-helper: Fix drm_gem_cma_free_object() drm: Fix timestamp docs for variable refresh properties. drm/komeda: Mark the local functions as static drm/komeda: Fixed warning: Function parameter or member not described drm/komeda: Expose bus_width to Komeda-CORE drm/komeda: Add sysfs attribute: core_id and config_id drm: add non-desktop quirk for Valve HMDs drm/panfrost: Show stored feature registers drm/panfrost: Don't scream about deferred probe drm/panfrost: Disable PM on probe failure drm/panfrost: Set DMA masks earlier drm/panfrost: Add sanity checks to submit IOCTL drm/etnaviv: initialize idle mask before querying the HW db drm: introduce a capability flag for syncobj timeline support drm: report consistent errors when checking syncobj capibility drm/nouveau/nouveau: forward error generated while resuming objects tree drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully" drm/nouveau/i2c: Disable i2c bus access after ->fini() drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition ...
2019-05-03usb: dwc3: Rename DWC3_DCTL_LPM_ERRATAThinh Nguyen2-3/+2
The macro name DWC3_DCTL_LPM_ERRATA is uninformative and does not do masking. Remove DWC3_DCTL_LPM_ERRATA_MASK and rename DWC3_DCTL_LPM_ERRATA to DWC3_DCTL_NYET_THRES with proper masking. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc3: Fix default lpm_nyet_threshold valueThinh Nguyen1-1/+1
The max possible value for DCTL.LPM_NYET_THRES is 15 and not 255. Change the default value to 15. Cc: stable@vger.kernel.org Fixes: 80caf7d21adc ("usb: dwc3: add lpm erratum support") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc3: debug: Print GET_STATUS(device) tracepointThinh Nguyen1-0/+3
DWC3 is missing the printing of control request GET_STATUS(device) tracepoint. This patch prints that. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc3: Do core validation early on probeThinh Nguyen1-6/+5
The setting of the dr_mode may need to check the controller's revision. The revision is set in the dwc3_core_is_valid(), which comes after dr_mode setting. Let's move it closer to the start of the dwc3_probe() function and before calling dwc3_get_dr_mode(). Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc3: gadget: Set lpm_capableThinh Nguyen1-0/+1
All DWC3 controllers are LPM capable. Report that in the usb_gadget.lpm_capable for the gadget driver to properly output the bcdUSB value in the descriptor. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc3: move synchronize_irq() out of the spinlock protected blockMarek Szyprowski2-2/+2
dwc3_gadget_suspend() is called under dwc->lock spinlock. In such context calling synchronize_irq() is not allowed. Move the problematic call out of the protected block to fix the following kernel BUG during system suspend: BUG: sleeping function called from invalid context at kernel/irq/manage.c:112 in_atomic(): 1, irqs_disabled(): 128, pid: 1601, name: rtcwake 6 locks held by rtcwake/1601: #0: f70ac2a2 (sb_writers#7){.+.+}, at: vfs_write+0x130/0x16c #1: b5fe1270 (&of->mutex){+.+.}, at: kernfs_fop_write+0xc0/0x1e4 #2: 7e597705 (kn->count#60){.+.+}, at: kernfs_fop_write+0xc8/0x1e4 #3: 8b3527d0 (system_transition_mutex){+.+.}, at: pm_suspend+0xc4/0xc04 #4: fc7f1c42 (&dev->mutex){....}, at: __device_suspend+0xd8/0x74c #5: 4b36507e (&(&dwc->lock)->rlock){....}, at: dwc3_gadget_suspend+0x24/0x3c irq event stamp: 11252 hardirqs last enabled at (11251): [<c09c54a4>] _raw_spin_unlock_irqrestore+0x6c/0x74 hardirqs last disabled at (11252): [<c09c4d44>] _raw_spin_lock_irqsave+0x1c/0x5c softirqs last enabled at (9744): [<c0102564>] __do_softirq+0x3a4/0x66c softirqs last disabled at (9737): [<c0128528>] irq_exit+0x140/0x168 Preemption disabled at: [<00000000>] (null) CPU: 7 PID: 1601 Comm: rtcwake Not tainted 5.0.0-rc3-next-20190122-00039-ga3f4ee4f8a52 #5252 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c01110f0>] (unwind_backtrace) from [<c010d120>] (show_stack+0x10/0x14) [<c010d120>] (show_stack) from [<c09a4d04>] (dump_stack+0x90/0xc8) [<c09a4d04>] (dump_stack) from [<c014c700>] (___might_sleep+0x22c/0x2c8) [<c014c700>] (___might_sleep) from [<c0189d68>] (synchronize_irq+0x28/0x84) [<c0189d68>] (synchronize_irq) from [<c05cbbf8>] (dwc3_gadget_suspend+0x34/0x3c) [<c05cbbf8>] (dwc3_gadget_suspend) from [<c05bd020>] (dwc3_suspend_common+0x154/0x410) [<c05bd020>] (dwc3_suspend_common) from [<c05bd34c>] (dwc3_suspend+0x14/0x2c) [<c05bd34c>] (dwc3_suspend) from [<c051c730>] (platform_pm_suspend+0x2c/0x54) [<c051c730>] (platform_pm_suspend) from [<c05285d4>] (dpm_run_callback+0xa4/0x3dc) [<c05285d4>] (dpm_run_callback) from [<c0528a40>] (__device_suspend+0x134/0x74c) [<c0528a40>] (__device_suspend) from [<c052c508>] (dpm_suspend+0x174/0x588) [<c052c508>] (dpm_suspend) from [<c0182134>] (suspend_devices_and_enter+0xc0/0xe74) [<c0182134>] (suspend_devices_and_enter) from [<c0183658>] (pm_suspend+0x770/0xc04) [<c0183658>] (pm_suspend) from [<c0180ddc>] (state_store+0x6c/0xcc) [<c0180ddc>] (state_store) from [<c09a9a70>] (kobj_attr_store+0x14/0x20) [<c09a9a70>] (kobj_attr_store) from [<c02d6800>] (sysfs_kf_write+0x4c/0x50) [<c02d6800>] (sysfs_kf_write) from [<c02d594c>] (kernfs_fop_write+0xfc/0x1e4) [<c02d594c>] (kernfs_fop_write) from [<c02593d8>] (__vfs_write+0x2c/0x160) [<c02593d8>] (__vfs_write) from [<c0259694>] (vfs_write+0xa4/0x16c) [<c0259694>] (vfs_write) from [<c0259870>] (ksys_write+0x40/0x8c) [<c0259870>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xed55ffa8 to 0xed55fff0) ... Fixes: 01c10880d242 ("usb: dwc3: gadget: synchronize_irq dwc irq in suspend") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc3: Free resource immediately after useAndy Shevchenko1-0/+3
When we read an array of integers from device properties, the temporary buffer is allocated. However, in case of dwc3_set_incr_burst_type() it's not freed. Free allocated buffer immediately after use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc3: of-simple: Convert to bulk clk APIRobin Murphy1-78/+17
Now that the bulk API has a "get all of the clocks" helper to match what this code wants, there's little reason not to switch over. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc3: Add Amlogic G12A DWC3 glueNeil Armstrong3-0/+615
Adds support for Amlogic G12A USB Control Glue HW. The Amlogic G12A SoC Family embeds 2 USB Controllers : - a DWC3 IP configured as Host for USB2 and USB3 - a DWC2 IP configured as Peripheral USB2 Only A glue connects these both controllers to 2 USB2 PHYs, and optionnally to an USB3+PCIE Combo PHY shared with the PCIE controller. The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including routing of the OTG PHY between the DWC3 and DWC2 controllers, and setups the on-chip OTG mode selection for this PHY. This drivers supports the on-probe setup of the OTG mode, and manually via a debugfs interface. The IRQ mode change detect is yet to be added in a future patchset, mainly due to lack of hardware to validate on. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc3: Allow building USB_DWC3_QCOM without EXTCONMarc Gonzalez1-2/+4
Keep EXTCON support optional, as some platforms do not need it. Do the same for USB_DWC3_OMAP while we're at it. Fixes: 3def4031b3e3f ("usb: dwc3: add EXTCON dependency for qcom") Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-04-24Merge tag 'drm/tegra/for-5.2-rc1' of ↵Dave Airlie1-1/+2
git://anongit.freedesktop.org/tegra/linux into drm-next drm/tegra: Changes for v5.2-rc1 This contains a fix for the usage of shared resets that previously generated a WARN on boot. In addition, there's a fix for CPU cache maintenance of GEM buffers allocated using get_pages(). (airlied: contains a merge from a shared tegra tree) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190418151447.9430-1-thierry.reding@gmail.com
2019-03-20reset: Add acquired flag to of_reset_control_array_get()Thierry Reding1-1/+2
In order to be able to request an array of reset controls in acquired or released mode, add the acquired flag to of_reset_control_array_get() and pass the flag to subsequent calls of __of_reset_control_get(). Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-03-20usb: dwc3: pci: add support for Comet Lake PCH IDFelipe Balbi1-0/+4
This patch simply adds a new PCI Device ID Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-02-19usb: dwc3: drd: Defer probe if extcon device is not foundAndy Shevchenko1-2/+7
In case the "linux,extcon-name" property is defined but device itself is not ready, defer the probe. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-15Merge tag 'usb-for-v5.1' of ↵Greg Kroah-Hartman9-116/+158
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.1 merge window Dwc3 now works on TI's AM6xx platforms. Also on dwc3 we have a few changes which improve request cancellation and some improvements to how we print to the trace buffer. Renesas_usb3 got support for r8a774c0 device. Dwc2 got scatter-gather support. Apart from these, the usual set of minor fixes and all sorts of small details. * tag 'usb-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (40 commits) usb: phy: twl6030-usb: fix possible use-after-free on remove usb: misc: usbtest: add super-speed isoc support usb: dwc3: Reset num_trbs after skipping usb: dwc3: gadget: don't enable interrupt when disabling endpoint fotg210-udc: pass struct device to DMA API functions fotg210-udc: remove a bogus dma_sync_single_for_device call usb: gadget: Change Andrzej Pietrasiewicz's e-mail address usb: f_fs: Avoid crash due to out-of-scope stack ptr access usb: dwc3: haps: Workaround matching VID PID usb: gadget: f_fs: preserve wMaxPacketSize across usb_ep_autoconfig() call usb: gadget: move non-super speed code out of usb_ep_autoconfig_ss() usb: gadget: function: sync f_uac1 ac header baInterfaceNr usb: dwc2: gadget: Add scatter-gather mode usb: gadget: fix various indentation issues usb: dwc2: Fix EP TxFIFO number setting udc: net2280: Fix net2280_disable USB: gadget: Improve kerneldoc for usb_ep_dequeue() usb: dwc3: debug: purge usage of strcat usb: dwc3: trace: pass trace buffer size to decoding functions usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING ...
2019-02-13usb: dwc3: Reset num_trbs after skippingThinh Nguyen1-0/+2
Currently req->num_trbs is not reset after the TRBs are skipped and processed from the cancelled list. The gadget driver may reuse the request with an invalid req->num_trbs, and DWC3 will incorrectly skip trbs. To fix this, simply reset req->num_trbs to 0 after skipping through all of them. Fixes: c3acd5901414 ("usb: dwc3: gadget: use num_trbs when skipping TRBs on ->dequeue()") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-07 01:39:38 +0300