summaryrefslogtreecommitdiff
path: root/drivers/usb/class
AgeCommit message (Collapse)AuthorFilesLines
2021-12-21tty: tty_io: Switch to vmalloc() fallback in case of TTY_NO_WRITE_SPLITAndy Shevchenko1-4/+0
When TTY_NO_WRITE_SPLIT is set and 64 KiB chunks are used, allow vmalloc() fallback. Supply __GFP_RETRY_MAYFAIL to make kmalloc() preferable over vmalloc() since we may want a better performance. Note, both current users copy data to another buffer anyway, so the type of our allocation doesn't affect their expectations. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211220133250.3070-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-11Merge 5.15-rc5 into usb-nextGreg Kroah-Hartman2-3/+11
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05USB: cdc-acm: fix break reportingJohan Hovold1-0/+3
A recent change that started reporting break events forgot to push the event to the line discipline, which meant that a detected break would not be reported until further characters had been receive (the port could even have been closed and reopened in between). Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls") Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210929090937.7410-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05USB: cdc-acm: fix racy tty buffer accessesJohan Hovold1-0/+5
A recent change that started reporting break events to the line discipline caused the tty-buffer insertions to no longer be serialised by inserting events also from the completion handler for the interrupt endpoint. Completion calls for distinct endpoints are not guaranteed to be serialised. For example, in case a host-controller driver uses bottom-half completion, the interrupt and bulk-in completion handlers can end up running in parallel on two CPUs (high-and low-prio tasklets, respectively) thereby breaking the tty layer's single producer assumption. Fix this by holding the read lock also when inserting characters from the bulk endpoint. Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls") Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210929090937.7410-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05usb: cdc-wdm: Fix check for WWANRikard Falkeborn1-3/+3
CONFIG_WWAN_CORE was with CONFIG_WWAN in commit 89212e160b81 ("net: wwan: Fix WWAN config symbols"), but did not update all users of it. Change it back to use CONFIG_WWAN instead. Fixes: 89212e160b81 ("net: wwan: Fix WWAN config symbols") Cc: <stable@vger.kernel.org> Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20210929194547.46954-2-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05usb: cdc-wdm: Constify static struct wwan_port_opsRikard Falkeborn1-1/+1
The only usage of wdm_wwan_port_ops is to pass its address to wwan_create_port() which takes a pointer to const wwan_port_ops as argument. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20210929194547.46954-3-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-27Merge 5.15-rc3 into usb-nextGreg Kroah-Hartman2-2/+7
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-21USB: cdc-acm: remove duplicate USB device IDKrzysztof Kozlowski1-1/+0
The device 0x00e9 (Nokia 5320 XpressMusic) is already on the list. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210917091849.18692-3-krzysztof.kozlowski@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14USB: cdc-acm: fix minor-number releaseJohan Hovold2-2/+7
If the driver runs out of minor numbers it would release minor 0 and allow another device to claim the minor while still in use. Fortunately, registering the tty class device of the second device would fail (with a stack dump) due to the sysfs name collision so no memory is leaked. Fixes: cae2bc768d17 ("usb: cdc-acm: Decrement tty port's refcount if probe() fail") Cc: stable@vger.kernel.org # 4.19 Cc: Jaejoong Kim <climbbb.kim@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210907082318.7757-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-09Merge 5.14-rc5 into tty-nextGreg Kroah-Hartman2-11/+4
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-27USB: usbtmc: Fix RCU stall warningQiang.zhang1-8/+1
rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 1-...!: (2 ticks this GP) idle=d92/1/0x4000000000000000 softirq=25390/25392 fqs=3 (t=12164 jiffies g=31645 q=43226) rcu: rcu_preempt kthread starved for 12162 jiffies! g31645 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task ........... usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: usb_submit_urb failed: -19 The function usbtmc_interrupt() resubmits urbs when the error status of an urb is -EPROTO. In systems using the dummy_hcd usb controller this can result in endless interrupt loops when the usbtmc device is disconnected from the host system. Since host controller drivers already try to recover from transmission errors, there is no need to resubmit the urb or try other solutions to repair the error situation. In case of errors the INT pipe just stops to wait for further packets. Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation") Cc: stable@vger.kernel.org Reported-by: syzbot+e2eae5639e7203360018@syzkaller.appspotmail.com Signed-off-by: Qiang.zhang <qiang.zhang@windriver.com> Acked-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Link: https://lore.kernel.org/r/20210723004334.458930-1-qiang.zhang@windriver.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-27tty: drop put_tty_driverJiri Slaby1-3/+3
put_tty_driver() is an alias for tty_driver_kref_put(). There is no need for two exported identical functions, therefore switch all users of old put_tty_driver() to new tty_driver_kref_put() and remove the former for good. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Scott Branden <scott.branden@broadcom.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Lin <dtwlin@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Oliver Neukum <oneukum@suse.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Acked-by: Alex Elder <elder@linaro.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: David Sterba <dsterba@suse.com> Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210723074317.32690-8-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-27tty: stop using alloc_tty_driverJiri Slaby1-4/+4
alloc_tty_driver was deprecated by tty_alloc_driver in commit 7f0bc6a68ed9 (TTY: pass flags to alloc_tty_driver) in 2012. I never got into eliminating alloc_tty_driver until now. So we still have two functions for allocating drivers which might be confusing. So get rid of alloc_tty_driver uses to eliminate it for good in the next patch. Note we need to switch return value checking as tty_alloc_driver uses ERR_PTR. And flags are now a parameter of tty_alloc_driver. Cc: Richard Henderson <rth@twiddle.net>(odd fixer:ALPHA PORT) Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Oliver Neukum <oneukum@suse.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Johan Hovold <johan@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: David Sterba <dsterba@suse.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210723074317.32690-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: cdc-wdm: fix build error when CONFIG_WWAN_CORE is not setWei Yongjun1-3/+3
Gcc report build error as following when CONFIG_WWAN_CORE is not set: x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_disconnect': cdc-wdm.c:(.text+0xb2a): undefined reference to `wwan_remove_port' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_in_callback': cdc-wdm.c:(.text+0xf23): undefined reference to `wwan_port_rx' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_stop': cdc-wdm.c:(.text+0x127d): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx': cdc-wdm.c:(.text+0x12d9): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x13c1): undefined reference to `wwan_port_txoff' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_start': cdc-wdm.c:(.text+0x13e0): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x1431): undefined reference to `wwan_port_txon' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx_complete': cdc-wdm.c:(.text+0x14a4): undefined reference to `wwan_port_txon' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_create.cold': cdc-wdm.c:(.text.unlikely+0x209): undefined reference to `wwan_create_port' Using CONFIG_WWAN_CORE instead of CONFIG_WWAN to avoid build error. Fixes: cac6fb015f71 ("usb: class: cdc-wdm: WWAN framework integration") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210521021010.2490930-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-06Merge tag 'usb-5.14-rc1' of ↵Linus Torvalds2-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt patches for 5.14-rc1. Nothing major here just lots of little changes for new hardware and features. Highlights are: - more USB 4 support added to the thunderbolt core - build warning fixes all over the place - usb-serial driver updates and new device support - mtu3 driver updates - gadget driver updates - dwc3 driver updates - dwc2 driver updates - isp1760 host driver updates - musb driver updates - lots of other tiny things. Full details are in the shortlog. All of these have been in linux-next for a while now with no reported issues" * tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits) phy: qcom-qusb2: Add configuration for SM4250 and SM6115 dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250 USB: cdc-acm: blacklist Heimann USB Appset device usb: xhci-mtk: allow multiple Start-Split in a microframe usb: ftdi-elan: remove redundant continue statement in a while-loop usb: class: cdc-wdm: return the correct errno code xhci: remove redundant continue statement usb: dwc3: Fix debugfs creation flow usb: gadget: hid: fix error return code in hid_bind() usb: gadget: eem: fix echo command packet response issue usb: gadget: f_hid: fix endianness issue with descriptors Revert "USB: misc: Add onboard_usb_hub driver" Revert "of/platform: Add stubs for of_platform_device_create/destroy()" Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()" Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub" xhci: solve a double free problem while doing s4 xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES ...
2021-07-06Merge tag 'tty-5.14-rc1' of ↵Linus Torvalds1-17/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver patches for 5.14-rc1. A bit more than normal, but nothing major, lots of cleanups. Highlights are: - lots of tty api cleanups and mxser driver cleanups from Jiri - build warning fixes - various serial driver updates - coding style cleanups - various tty driver minor fixes and updates - removal of broken and disable r3964 line discipline (finally!) All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits) serial: mvebu-uart: remove unused member nb from struct mvebu_uart arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART dt-bindings: mvebu-uart: fix documentation serial: mvebu-uart: correctly calculate minimal possible baudrate serial: mvebu-uart: do not allow changing baudrate when uartclk is not available serial: mvebu-uart: fix calculation of clock divisor tty: make linux/tty_flip.h self-contained serial: Prefer unsigned int to bare use of unsigned serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs serial: qcom_geni_serial: use DT aliases according to DT bindings Revert "tty: serial: Add UART driver for Cortina-Access platform" tty: serial: Add UART driver for Cortina-Access platform MAINTAINERS: add me back as mxser maintainer mxser: Documentation, fix typos mxser: Documentation, make the docs up-to-date mxser: Documentation, remove traces of callout device mxser: introduce mxser_16550A_or_MUST helper mxser: rename flags to old_speed in mxser_set_serial_info mxser: use port variable in mxser_set_serial_info mxser: access info->MCR under info->slock ...
2021-06-24USB: cdc-acm: blacklist Heimann USB Appset deviceHannu Hartikainen1-0/+5
The device (32a7:0000 Heimann Sensor GmbH USB appset demo) claims to be a CDC-ACM device in its descriptors but in fact is not. If it is run with echo disabled it returns garbled data, probably due to something that happens in the TTY layer. And when run with echo enabled (the default), it will mess up the calibration data of the sensor the first time any data is sent to the device. In short, I had a bad time after connecting the sensor and trying to get it to work. I hope blacklisting it in the cdc-acm driver will save someone else a bit of trouble. Signed-off-by: Hannu Hartikainen <hannu@hrtk.in> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210622141454.337948-1-hannu@hrtk.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24usb: class: cdc-wdm: return the correct errno codeJunlin Yang1-2/+3
The "rv" is initialized to "-ENOMEM", because "rv" is re-assigned to "-EINVAL", when kmalloc & usb_alloc_urb failed, the return value should return "-ENOMEM" rather than "-EINVAL",so the "rv" assignment is placed in the position where usb_endpoint_is_int_in is false. Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Junlin Yang <yangjunlin@yulong.com> Link: https://lore.kernel.org/r/20210621132415.2341-1-angkery@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15tty: make use of tty_get_{char,frame}_sizeJiri Slaby1-15/+2
In the previous patch, we introduced tty_get_char_size() and tty_get_frame_size() for computing character and frame sizes, respectively. Here, we make use of them in various tty drivers where applicable. The stats look nice: 12 insertions, 169 deletions. Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Lin <dtwlin@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Oliver Neukum <oneukum@suse.com> Acked-by: Alex Elder <elder@kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210610090247.2593-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-31Merge 5.13-rc4 into tty-nextGreg Kroah-Hartman1-8/+22
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-9/+24
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-13tty: make tty_operations::chars_in_buffer return uintJiri Slaby1-1/+1
tty_operations::chars_in_buffer is another hook which is expected to return values >= 0. So make it explicit by the return type too -- use unsigned int. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Acked-by: David Sterba <dsterba@suse.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Lin <dtwlin@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Oliver Neukum <oneukum@suse.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Link: https://lore.kernel.org/r/20210505091928.22010-27-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13tty: make tty_operations::write_room return uintJiri Slaby1-1/+1
Line disciplines expect a positive value or zero returned from tty->ops->write_room (invoked by tty_write_room). So make this assumption explicit by using unsigned int as a return value. Both of tty->ops->write_room and tty_write_room. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Alex Elder <elder@linaro.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> # xtensa Acked-by: David Sterba <dsterba@suse.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Chris Zankel <chris@zankel.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Scott Branden <scott.branden@broadcom.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Lin <dtwlin@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Oliver Neukum <oneukum@suse.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Link: https://lore.kernel.org/r/20210505091928.22010-23-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-12usb: class: cdc-wdm: WWAN framework integrationLoic Poulain1-4/+176
The WWAN framework provides a unified way to handle WWAN/modems and its control port(s). It has initially been introduced to support MHI/PCI modems, offering the same control protocols as the USB variants such as MBIM, QMI, AT... The WWAN framework exposes these control protocols as character devices, similarly to cdc-wdm, but in a bus agnostic fashion. This change adds registration of the USB modem cdc-wdm control endpoints to the WWAN framework as standard control ports (wwanXpY...). Exposing cdc-wdm through WWAN framework normally maintains backward compatibility, e.g: $ qmicli --device-open-qmi -d /dev/wwan0p1QMI --dms-get-ids instead of $ qmicli --device-open-qmi -d /dev/cdc-wdm0 --dms-get-ids However, some tools may rely on cdc-wdm driver/device name for device detection. It is then safer to keep the 'legacy' cdc-wdm character device to prevent any breakage. This is handled in this change by API mutual exclusion, only one access method can be used at a time, either cdc-wdm chardev or WWAN API. Note that unknown channel types (other than MBIM, AT or MBIM) are not registered to the WWAN framework. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-10cdc-wdm: untangle a circular dependency between callback and softintOliver Neukum1-8/+22
We have a cycle of callbacks scheduling works which submit URBs with those callbacks. This needs to be blocked, stopped and unblocked to untangle the circle. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20210426092622.20433-1-oneukum@suse.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22Merge tag 'usb-serial-5.13-rc1' of ↵Greg Kroah-Hartman1-3/+11
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.13-rc1 Here are the USB-serial updates for 5.13-rc1, including: - better type detection for pl2303 - support for more line speeds for pl2303 (TA/TB) - fixed CSIZE handling for the new xr driver - core support for multi-interface functions - TIOCGSERIAL and TIOCSSERIAL fixes - generic TIOCSSERIAL support (e.g. for closing_wait) - fixed return value for unsupported ioctls - support for gpio valid masks in cp210x - drain-delay fixes and improvements - support for multi-port devices for xr - generalisation of the xr driver to support three new device classes (XR21B142X, XR21B1411 and XR2280X) Included are also various clean ups. All have been in linux-next with no reported issues. * tag 'usb-serial-5.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (72 commits) USB: cdc-acm: add more Maxlinear/Exar models to ignore list USB: serial: xr: add copyright notice USB: serial: xr: reset FIFOs on open USB: serial: xr: add support for XR22801, XR22802, XR22804 USB: serial: xr: add support for XR21B1411 USB: serial: xr: add support for XR21B1421, XR21B1422 and XR21B1424 USB: serial: xr: add type abstraction USB: serial: xr: drop type prefix from shared defines USB: serial: xr: move pin configuration to probe USB: serial: xr: rename GPIO-pin defines USB: serial: xr: rename GPIO-mode defines USB: serial: xr: add support for XR21V1412 and XR21V1414 USB: serial: ti_usb_3410_5052: clean up termios CSIZE handling USB: serial: ti_usb_3410_5052: use kernel types consistently USB: serial: ti_usb_3410_5052: add port-command helpers USB: serial: ti_usb_3410_5052: clean up vendor-request helpers USB: serial: ti_usb_3410_5052: drop unnecessary packed attributes USB: serial: io_ti: drop unnecessary packed attributes USB: serial: io_ti: use kernel types consistently USB: serial: io_ti: add read-port-command helper ...
2021-04-22USB: CDC-ACM: fix poison/unpoison imbalanceOliver Neukum1-1/+2
suspend() does its poisoning conditionally, resume() does it unconditionally. On a device with combined interfaces this will balance, on a device with two interfaces the counter will go negative and resubmission will fail. Both actions need to be done conditionally. Fixes: 6069e3e927c8f ("USB: cdc-acm: untangle a circular dependency between callback and softint") Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210421074513.4327-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13USB: cdc-acm: add more Maxlinear/Exar models to ignore listMauro Carvalho Chehab1-3/+11
Now that the xr_serial got support for other models, add their USB IDs as well. The Maxlinear/Exar USB UARTs can be used in either ACM mode using the cdc-acm driver or in "custom driver" mode in which further features such as hardware and software flow control, GPIO control and in-band line-status reporting are available. In ACM mode the device always enables RTS/CTS flow control, something which could prevent transmission in case the CTS input isn't wired up correctly. Ensure that cdc_acm will not bind to these devices if the custom USB-serial driver is enabled. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5155887a764cbc11f8da0217fe08a24a77d120b4.1616571453.git.mchehab+huawei@kernel.org [ johan: rewrite commit message, clean up entries ] Cc: Oliver Neukum <oneukum@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-09USB: cdc-acm: fix TIOCGSERIAL implementationJohan Hovold1-2/+1
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when it is not used. Similarly, baud_base could be used to set the UART base clock when it could not be detected, but might as well be left unset when it is not known (which is the case for CDC). Fix the cdc-acm TIOCGSERIAL implementation by dropping its custom interpretation of the unused xmit_fifo_size and baud_base fields, which overflowed the former with the URB buffer size and set the latter to the current line speed. Also return the port line number, which is the only other value used besides the close parameters. Note that the current line speed can still be retrieved through the standard termios interfaces. Fixes: 18c75720e667 ("USB: allow users to run setserial with cdc-acm") Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210408131602.27956-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09USB: cdc-acm: fix unprivileged TIOCCSERIALJohan Hovold1-2/+0
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. A non-privileged user has only ever been able to set the since long deprecated ASYNC_SPD flags and trying to change any other *supported* feature should result in -EPERM being returned. Setting the current values for any supported features should return success. Fix the cdc-acm implementation which instead indicated that the TIOCSSERIAL ioctl was not even implemented when a non-privileged user set the current values. Fixes: ba2d8ce9db0a ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)") Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210408131602.27956-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09Revert "USB: cdc-acm: fix rounding error in TIOCSSERIAL"Johan Hovold1-9/+2
This reverts commit b401f8c4f492cbf74f3f59c9141e5be3071071bb. The offending commit claimed that trying to set the values reported back by TIOCGSERIAL as a regular user could result in an -EPERM error when HZ is 250, but that was never the case. With HZ=250, the default 0.5 second value of close_delay is converted to 125 jiffies when set and is converted back to 50 centiseconds by TIOCGSERIAL as expected (not 12 cs as was claimed, even if that was the case before an earlier fix). Comparing the internal current and new jiffies values is just fine to determine if the value is about to change so drop the bogus workaround (which was also backported to stable). For completeness: With different default values for these parameters or with a HZ value not divisible by two, the lack of rounding when setting the default values in tty_port_init() could result in an -EPERM being returned, but this is hardly something we need to worry about. Cc: Anthony Mallet <anthony.mallet@laas.fr> Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210408131602.27956-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: cdc-acm: do not log successful probe on later errorsJohan Hovold1-2/+2
Do not log the successful-probe message until the tty device has been registered. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322155318.9837-9-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: cdc-acm: always claim data interfaceJohan Hovold1-8/+6
Make sure to always claim the data interface and bail out if binding fails. Note that the driver had a check to verify that the data interface was not already bound to a driver but would not detect other failures (e.g. if the interface was not authorised). Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322155318.9837-8-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: cdc-acm: use negation for NULL checksJohan Hovold1-2/+2
Use negation consistently throughout the driver for NULL checks. Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322155318.9837-7-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: cdc-acm: clean up probe error labelsJohan Hovold1-17/+18
Name the probe error labels after what they do rather than using sequence numbers which is harder to review and maintain (e.g. may require renaming unrelated labels when a label is added or removed). Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322155318.9837-6-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: cdc-acm: drop redundant driver-data resetJohan Hovold1-1/+0
There's no need to clear the interface driver data on failed probe (and driver core will clear it anyway). Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322155318.9837-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: cdc-acm: drop redundant driver-data assignmentJohan Hovold1-1/+0
The interface driver data has already been set by usb_driver_claim_interface() so drop the redundant subsequent assignment. Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322155318.9837-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: cdc-acm: fix use-after-free after probe failureJohan Hovold1-0/+5
If tty-device registration fails the driver would fail to release the data interface. When the device is later disconnected, the disconnect callback would still be called for the data interface and would go about releasing already freed resources. Fixes: c93d81955005 ("usb: cdc-acm: fix error handling in acm_probe()") Cc: stable@vger.kernel.org # 3.9 Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322155318.9837-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: cdc-acm: fix double free on probe failureJohan Hovold1-1/+0
If tty-device registration fails the driver copy of any Country Selection functional descriptor would end up being freed twice; first explicitly in the error path and then again in the tty-port destructor. Drop the first erroneous free that was left when fixing a tty-port resource leak. Fixes: cae2bc768d17 ("usb: cdc-acm: Decrement tty port's refcount if probe() fail") Cc: stable@vger.kernel.org # 4.19 Cc: Jaejoong Kim <climbbb.kim@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322155318.9837-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: cdc-acm: downgrade message to debugOliver Neukum1-1/+2
This failure is so common that logging an error here amounts to spamming log files. Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210311130126.15972-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: cdc-acm: untangle a circular dependency between callback and softintOliver Neukum1-16/+32
We have a cycle of callbacks scheduling works which submit URBs with thos callbacks. This needs to be blocked, stopped and unblocked to untangle the circle. The issue leads to faults like: [ 55.068392] Unable to handle kernel paging request at virtual address 6b6b6c03 [ 55.075624] pgd = be866494 [ 55.078335] [6b6b6c03] *pgd=00000000 [ 55.081924] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 55.087238] Modules linked in: ppp_async crc_ccitt ppp_generic slhc xt_TCPMSS xt_tcpmss xt_hl nf_log_ipv6 nf_log_ipv4 nf_log_common xt_policy xt_limit xt_conntrack xt_tcpudp xt_pkttype ip6table_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle ip6table_filter ip6_tables iptable_filter ip_tables des_generic md5 sch_fq_codel cdc_mbim cdc_wdm cdc_ncm usbnet mii cdc_acm usb_storage ip_tunnel xfrm_user xfrm6_tunnel tunnel6 xfrm4_tunnel tunnel4 esp6 esp4 ah6 ah4 xfrm_algo xt_LOG xt_LED xt_comment x_tables ipv6 [ 55.134954] CPU: 0 PID: 82 Comm: kworker/0:2 Tainted: G T 5.8.17 #1 [ 55.142526] Hardware name: Freescale i.MX7 Dual (Device Tree) [ 55.148304] Workqueue: events acm_softint [cdc_acm] [ 55.153196] PC is at kobject_get+0x10/0xa4 [ 55.157302] LR is at usb_get_dev+0x14/0x1c [ 55.161402] pc : [<8047c06c>] lr : [<80560448>] psr: 20000193 [ 55.167671] sp : bca39ea8 ip : 00007374 fp : bf6cbd80 [ 55.172899] r10: 00000000 r9 : bdd92284 r8 : bdd92008 [ 55.178128] r7 : 6b6b6b6b r6 : fffffffe r5 : 60000113 r4 : 6b6b6be3 [ 55.184658] r3 : 6b6b6b6b r2 : 00000111 r1 : 00000000 r0 : 6b6b6be3 [ 55.191191] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 55.198417] Control: 10c5387d Table: bcf0c06a DAC: 00000051 [ 55.204168] Process kworker/0:2 (pid: 82, stack limit = 0x9bdd2a89) [ 55.210439] Stack: (0xbca39ea8 to 0xbca3a000) [ 55.214805] 9ea0: bf6cbd80 80769a50 6b6b6b6b 80560448 bdeb0500 8056bfe8 [ 55.222991] 9ec0: 00000002 b76da000 00000000 bdeb0500 bdd92448 bca38000 bdeb0510 8056d69c [ 55.231177] 9ee0: bca38000 00000000 80c050fc 00000000 bca39f44 09d42015 00000000 00000001 [ 55.239363] 9f00: bdd92448 bdd92438 bdd92000 7f1158c4 bdd92448 bca2ee00 bf6cbd80 bf6cef00 [ 55.247549] 9f20: 00000000 00000000 00000000 801412d8 bf6cbd98 80c03d00 bca2ee00 bf6cbd80 [ 55.255735] 9f40: bca2ee14 bf6cbd98 80c03d00 00000008 bca38000 80141568 00000000 80c446ae [ 55.263921] 9f60: 00000000 bc9ed880 bc9f0700 bca38000 bc117eb4 80141524 bca2ee00 bc9ed8a4 [ 55.272107] 9f80: 00000000 80147cc8 00000000 bc9f0700 80147b84 00000000 00000000 00000000 [ 55.280292] 9fa0: 00000000 00000000 00000000 80100148 00000000 00000000 00000000 00000000 [ 55.288477] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 55.296662] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 55.304860] [<8047c06c>] (kobject_get) from [<80560448>] (usb_get_dev+0x14/0x1c) [ 55.312271] [<80560448>] (usb_get_dev) from [<8056bfe8>] (usb_hcd_unlink_urb+0x50/0xd8) [ 55.320286] [<8056bfe8>] (usb_hcd_unlink_urb) from [<8056d69c>] (usb_kill_urb.part.0+0x44/0xd0) [ 55.329004] [<8056d69c>] (usb_kill_urb.part.0) from [<7f1158c4>] (acm_softint+0x4c/0x10c [cdc_acm]) [ 55.338082] [<7f1158c4>] (acm_softint [cdc_acm]) from [<801412d8>] (process_one_work+0x19c/0x3e8) [ 55.346969] [<801412d8>] (process_one_work) from [<80141568>] (worker_thread+0x44/0x4dc) [ 55.355072] [<80141568>] (worker_thread) from [<80147cc8>] (kthread+0x144/0x180) [ 55.362481] [<80147cc8>] (kthread) from [<80100148>] (ret_from_fork+0x14/0x2c) [ 55.369706] Exception stack(0xbca39fb0 to 0xbca39ff8) Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210311130126.15972-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23cdc-acm: fix BREAK rx code path adding necessary callsOliver Neukum1-1/+3
Counting break events is nice but we should actually report them to the tty layer. Fixes: 5a6a62bdb9257 ("cdc-acm: add TIOCMIWAIT") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20210311133714.31881-1-oneukum@suse.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10USB: usblp: fix a hang in poll() if disconnectedPete Zaitcev1-4/+12
Apparently an application that opens a device and calls select() on it, will hang if the decice is disconnected. It's a little surprising that we had this bug for 15 years, but apparently nobody ever uses select() with a printer: only write() and read(), and those work fine. Well, you can also select() with a timeout. The fix is modeled after devio.c. A few other drivers check the condition first, then do not add the wait queue in case the device is disconnected. We doubt that's completely race-free. So, this patch adds the process first, then locks properly and checks for the disconnect. Reviewed-by: Zqiang <qiang.zhang@windriver.com> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210303221053.1cf3313e@suzdal.zaitcev.lan Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10Goodix Fingerprint device is not a modemYorick de Wid1-0/+5
The CDC ACM driver is false matching the Goodix Fingerprint device against the USB_CDC_ACM_PROTO_AT_V25TER. The Goodix Fingerprint device is a biometrics sensor that should be handled in user-space. libfprint has some support for Goodix fingerprint sensors, although not for this particular one. It is possible that the vendor allocates a PID per OEM (Lenovo, Dell etc). If this happens to be the case then more devices from the same vendor could potentially match the ACM modem module table. Signed-off-by: Yorick de Wid <ydewid@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210213144901.53199-1-ydewid@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10Merge tag 'usb-serial-5.12-rc1' of ↵Greg Kroah-Hartman1-0/+6
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.12-rc1 Here are the USB-serial updates for 5.12-rc1, including: - a line-speed fix for newer pl2303 devices - a line-speed fix for FTDI FT-X devices - a new xr_serial driver for MaxLinear/Exar devices (non-ACM mode) - a cdc-acm blacklist entry for when the xr_serial driver is enabled - cp210x support for software flow control - various cp210x modem-control fixes - an updated ZTE P685M modem entry to stop claiming the QMI interface - an update to drop the port_remove() driver-callback return value Included are also various clean ups. All have been in linux-next with no reported issues. * tag 'usb-serial-5.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (41 commits) USB: serial: drop bogus to_usb_serial_port() checks USB: serial: make remove callback return void USB: serial: drop if with an always false condition USB: serial: option: update interface mapping for ZTE P685M USB: serial: ftdi_sio: restore divisor-encoding comments USB: serial: ftdi_sio: fix FTX sub-integer prescaler USB: serial: cp210x: clean up auto-RTS handling USB: serial: cp210x: fix RTS handling USB: serial: cp210x: clean up printk zero padding USB: serial: cp210x: clean up flow-control debug message USB: serial: cp210x: drop shift macros USB: serial: cp210x: fix modem-control handling USB: serial: cp210x: suppress modem-control errors USB: serial: mos7720: fix error code in mos7720_write() USB: serial: xr: fix B0 handling USB: serial: xr: fix pin configuration USB: serial: xr: fix gpio-mode handling USB: serial: xr: simplify line-speed logic USB: serial: xr: clean up line-settings handling USB: serial: xr: document vendor-request recipient ...
2021-02-08Merge 5.11-rc7 into usb-nextGreg Kroah-Hartman1-8/+11
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-26USB: usblp: don't call usb_set_interface if there's a single altJeremy Figgins1-8/+11
Some devices, such as the Winbond Electronics Corp. Virtual Com Port (Vendor=0416, ProdId=5011), lockup when usb_set_interface() or usb_clear_halt() are called. This device has only a single altsetting, so it should not be necessary to call usb_set_interface(). Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Jeremy Figgins <kernel@jeremyfiggins.com> Link: https://lore.kernel.org/r/YAy9kJhM/rG8EQXC@watson Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-21USB: cdc-acm: ignore Exar XR21V141X when serial driver is builtMauro Carvalho Chehab1-0/+6
The Exar XR21V141X can be used in either ACM mode using the cdc-acm driver or in "custom driver" mode in which further features such as hardware and software flow control, GPIO control and in-band line-status reporting are available. In ACM mode the device always enables RTS/CTS flow control, something which could prevent transmission in case the CTS input isn't wired up correctly. Ensure that cdc_acm will not bind to the device if the custom USB-serial driver is enabled. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/20201122170822.21715-4-mani@kernel.org [ johan: rewrite commit message ] Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-11Merge 5.11-rc3 into usb-nextGreg Kroah-Hartman3-5/+36
Resolves a merge issue in: drivers/usb/dwc3/gadget.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04USB: usblp: fix DMA to stackJohan Hovold1-2/+19
Stack-allocated buffers cannot be used for DMA (on all architectures). Replace the HP-channel macro with a helper function that allocates a dedicated transfer buffer so that it can continue to be used with arguments from the stack. Note that the buffer is cleared on allocation as usblp_ctrl_msg() returns success also on short transfers (the buffer is only used for debugging). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210104145302.2087-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 12:38:09 +0300