summaryrefslogtreecommitdiff
path: root/drivers/usb/cdns3/gadget.c
AgeCommit message (Collapse)AuthorFilesLines
2020-10-30usb: cdns3: gadget: own the lock wrongly at the suspend routinePeter Chen1-4/+7
When the system goes to suspend, if the controller is at device mode with cable connecting to host, the call stack is: cdns3_suspend-> cdns3_gadget_suspend -> cdns3_disconnect_gadget, after cdns3_disconnect_gadget is called, it owns lock wrongly, it causes the system being deadlock after resume due to at cdns3_device_thread_irq_handler, it tries to get the lock, but can't get it forever. To fix it, we delete the unlock-lock operations at cdns3_disconnect_gadget, and do it at the caller. Fixes: b1234e3b3b26 ("usb: cdns3: add runtime PM support") Acked-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-10-30usb: cdns3: Fix on-chip memory overflow issuePawel Laszczak1-45/+57
Patch fixes issue caused setting On-chip memory overflow bit in usb_sts register. The issue occurred because EP_CFG register was set twice before USB_STS.CFGSTS was set. Every write operation on EP_CFG.BUFFERING causes that controller increases internal counter holding the number of reserved on-chip buffers. First time this register was updated in function cdns3_ep_config before delegating SET_CONFIGURATION request to class driver and again it was updated when class wanted to enable endpoint. This patch fixes this issue by configuring endpoints enabled by class driver in cdns3_gadget_ep_enable and others just before status stage. Cc: stable@vger.kernel.org#v5.8+ Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reported-and-tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-10-28usb: cdns3: Variable 'length' set but not usedPawel Laszczak1-2/+0
Patch removes not used variable 'length' from cdns3_wa2_descmiss_copy_data function. Fixes: 141e70fef4ee ("usb: cdns3: gadget: need to handle sg case for workaround 2 case") Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-10-02usb: cdns3: gadget: sg_support is only for DEV_VER_V2 or abovePeter Chen1-1/+2
The scatter buffer list support earlier than DEV_VER_V2 is not good enough, software can't know well about short transfer for it. Cc: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: need to handle sg case for workaround 2 casePeter Chen1-13/+31
Add sg case for workaround 2, the workaround 2 is described at the beginning of this file. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: handle sg list use case at completion correctlyPeter Chen1-29/+56
- Judge each TRB has been handled at cdns3_trb_handled, since the DMA pointer may be at the middle of the TD, we can't consider this TD has finished at that time. - Calculate req->actual according to finished TRBs. - Handle short transfer for sg list use case correctly. When the short transfer occurs, we check OUT_SMM at TRB to see if it is the last TRB. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: add CHAIN and ISP bit for sg list use casePeter Chen1-1/+7
For sg buffer list use case, we need to add ISP for each TRB, and add CHAIN bit for each TRB except for the last TRB. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: improve the dump TRB operation at cdns3_ep_run_transferPeter Chen1-2/+17
It only dumps the first TRB per request, it is not useful if only dump the first TRB when there are several TRBs per request. We improve it by dumpping all TRBs per request in this commit. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: using correct sg operationsPeter Chen1-7/+15
It needs to use request->num_mapped_sgs to indicate mapped sg number, the request->num_sgs is the sg number before the mapping. These two entries have different values for the platforms which iommu or swiotlb is used. Besides, it needs to use correct sg APIs for mapped sg list for TRB assignment. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: fix possible memory leakPeter Chen1-5/+15
If cdns3_gadget_start is failed, it never frees cdns3_device structure. Meanwhile, there is no release function for gadget device, it causes there is no sync with driver core. To fix this, we add release function for gadget device, and free cdns3_device structure at there. Meanwhile, With the new UDC core APIs, we could work with driver core better to handle memory leak issue. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: fix some endian issuesPeter Chen1-30/+30
It is found by sparse. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: move wait configuration operationPeter Chen1-5/+0
After commit f4cfe5ce607d ("usb: cdns3: gadget: improve the set_configuration handling"), the software will inform the hardware the request has finished at cdns3_ep0_complete_setup. The configuration set bit is only set after request has finished, so it needs to move waiting operation after that. Meanwhile, if it is timeout, it will show warning message and return error. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: clear the interrupt status when disconnect the hostPeter Chen1-2/+5
It is meaningless to handle any interrupts after disconnecting with host Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: set fast access bitPeter Chen1-0/+3
Below is the recommendation from Cadence designer: Using this bit to be sure that PHY clock is keeping up in active state. It's good to keep Fast Access bit enabled as long as there is any access to USB register. It is used to fix the potential ARM core hang when visit controller register after DEVDS (.pullup is cleared) is set, the threaded irq may be scheduled at that time. Cc: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: add runtime PM supportPeter Chen1-0/+4
Introduce runtime PM and wakeup interrupt handler for cdns3, the runtime PM is default off since other cdns3 may not implement glue layer support for runtime PM. One typical wakeup event use case is xHCI runtime suspend will clear USBCMD.RS bit, after that the xHCI will not trigger any interrupts, so its parent (cdns core device) needs to resume xHCI device when any (wakeup) events occurs at host port. When the controller is in low power mode, the lpm flag will be set. The interrupt triggered later than lpm flag is set considers as wakeup interrupt and handled at cdns_wakeup_irq. Once the wakeup occurs, it first disables interrupt to avoid later interrupt occurrence since the controller is in low power mode at that time, and access registers may be invalid at that time. At wakeup handler, it will call pm_request_resume to wakeup xHCI device, and at runtime resume handler, it will enable interrupt again. The API platform_suspend is introduced for glue layer to implement platform specific PM sequence. Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-09-24usb: cdns3: gadget: free interrupt after gadget has deletedPeter Chen1-1/+1
The interrupt may occur during the gadget deletion, it fixes the below oops. [ 2394.974604] configfs-gadget gadget: suspend [ 2395.042578] configfs-gadget 5b130000.usb: unregistering UDC driver [g1] [ 2395.382562] irq 229: nobody cared (try booting with the "irqpoll" option) [ 2395.389362] CPU: 0 PID: 301 Comm: kworker/u12:6 Not tainted 5.8.0-rc3-next-20200703-00060-g2f13b83cbf30-dirty #456 [ 2395.399712] Hardware name: Freescale i.MX8QM MEK (DT) [ 2395.404782] Workqueue: 2-0051 tcpm_state_machine_work [ 2395.409832] Call trace: [ 2395.412289] dump_backtrace+0x0/0x1d0 [ 2395.415950] show_stack+0x1c/0x28 [ 2395.419271] dump_stack+0xbc/0x118 [ 2395.422678] __report_bad_irq+0x50/0xe0 [ 2395.426513] note_interrupt+0x2cc/0x38c [ 2395.430355] handle_irq_event_percpu+0x88/0x90 [ 2395.434800] handle_irq_event+0x4c/0xe8 [ 2395.438640] handle_fasteoi_irq+0xbc/0x168 [ 2395.442740] generic_handle_irq+0x34/0x48 [ 2395.446752] __handle_domain_irq+0x68/0xc0 [ 2395.450846] gic_handle_irq+0x64/0x150 [ 2395.454596] el1_irq+0xb8/0x180 [ 2395.457733] __do_softirq+0xac/0x3b8 [ 2395.461310] irq_exit+0xc0/0xe0 [ 2395.464448] __handle_domain_irq+0x6c/0xc0 [ 2395.468540] gic_handle_irq+0x64/0x150 [ 2395.472295] el1_irq+0xb8/0x180 [ 2395.475436] _raw_spin_unlock_irqrestore+0x14/0x48 [ 2395.480232] usb_gadget_disconnect+0x120/0x140 [ 2395.484678] usb_gadget_remove_driver+0xb4/0xd0 [ 2395.489208] usb_del_gadget+0x6c/0xc8 [ 2395.492872] cdns3_gadget_exit+0x5c/0x120 [ 2395.496882] cdns3_role_stop+0x60/0x90 [ 2395.500634] cdns3_role_set+0x64/0xd8 [ 2395.504301] usb_role_switch_set_role.part.0+0x3c/0x90 [ 2395.509444] usb_role_switch_set_role+0x20/0x30 [ 2395.513978] tcpm_mux_set+0x60/0xf8 [ 2395.517470] tcpm_reset_port+0xa4/0xf0 [ 2395.521222] tcpm_detach.part.0+0x44/0x50 [ 2395.525227] tcpm_state_machine_work+0x8b0/0x2360 [ 2395.529932] process_one_work+0x1c8/0x470 [ 2395.533939] worker_thread+0x50/0x420 [ 2395.537603] kthread+0x148/0x168 [ 2395.540830] ret_from_fork+0x10/0x18 [ 2395.544399] handlers: [ 2395.546671] [<000000008dea28da>] cdns3_wakeup_irq [ 2395.551375] [<000000009fee5c61>] cdns3_drd_irq threaded [<000000005148eaec>] cdns3_drd_thread_irq [ 2395.560255] Disabling IRQ #229 [ 2395.563454] configfs-gadget gadget: unbind function 'Mass Storage Function'/000000000132f835 [ 2395.563657] configfs-gadget gadget: unbind [ 2395.563917] udc 5b130000.usb: releasing '5b130000.usb' Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: <stable@vger.kernel.org> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cdns3: drd: simplify *switch_gadet and *switch_hostPawel Laszczak1-2/+2
Patch split function cdns3_drd_switch_gadget and cdns3_drd_switch_host into: - cdns3_drd_host_on - cdns3_drd_host_off - cdns3_drd_gadget_on - cdns3_drd_gadgett_off These functions don't have any shared code so it's better to have smaller, faster and easier functions. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cdns3: gadget: always zeroed TRB buffer when enable endpointPeter Chen1-1/+2
During the endpoint dequeue operation, it changes dequeued TRB as link TRB, when the endpoint is disabled and re-enabled, the DMA fetches the TRB before the link TRB, after it handles current TRB, the DMA pointer will advance to the TRB after link TRB, but enqueue and dequene variables don't know it due to no hardware interrupt at the time, when the next TRB is added to link TRB position, the DMA will not handle this TRB due to its pointer is already at the next TRB. See the trace log like below: file-storage-675 [001] d..1 86.585657: usb_ep_queue: ep0: req 00000000df9b3a4f length 0/0 sgs 0/0 stream 0 zsI status 0 --> 0 file-storage-675 [001] d..1 86.585663: cdns3_ep_queue: ep1out: req: 000000002ebce364, req buff 00000000f5bc96b4, length: 0/1024 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0 file-storage-675 [001] d..1 86.585671: cdns3_prepare_trb: ep1out: trb 000000007f770303, dma buf: 0xbd195800, size: 1024, burst: 128 ctrl: 0x00000425 (C=1, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0 file-storage-675 [001] d..1 86.585676: cdns3_ring: Ring contents for ep1out: Ring deq index: 0, trb: 000000007f770303 (virt), 0xc4003000 (dma) Ring enq index: 1, trb: 0000000049c1ba21 (virt), 0xc400300c (dma) free trbs: 38, CCS=1, PCS=1 @0x00000000c4003000 bd195800 80020400 00000425 @0x00000000c400300c c4003018 80020400 00001811 @0x00000000c4003018 bcfcc000 0000001f 00000426 @0x00000000c4003024 bcfce800 0000001f 00000426 ... irq/144-5b13000-698 [000] d... 87.619286: usb_gadget_giveback_request: ep1in: req 0000000031b832eb length 13/13 sgs 0/0 stream 0 zsI status 0 --> 0 file-storage-675 [001] d..1 87.619287: cdns3_ep_queue: ep1out: req: 000000002ebce364, req buff 00000000f5bc96b4, length: 0/1024 zsi, status: -115, trb: [start:0, end:0: virt addr 0x80020400c400300c], flags:0 SID: 0 file-storage-675 [001] d..1 87.619294: cdns3_prepare_trb: ep1out: trb 0000000049c1ba21, dma buf: 0xbd198000, size: 1024, burst: 128 ctrl: 0x00000425 (C=1, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0 file-storage-675 [001] d..1 87.619297: cdns3_ring: Ring contents for ep1out: Ring deq index: 1, trb: 0000000049c1ba21 (virt), 0xc400300c (dma) Ring enq index: 2, trb: 0000000059b34b67 (virt), 0xc4003018 (dma) free trbs: 38, CCS=1, PCS=1 @0x00000000c4003000 bd195800 0000001f 00000427 @0x00000000c400300c bd198000 80020400 00000425 @0x00000000c4003018 bcfcc000 0000001f 00000426 @0x00000000c4003024 bcfce800 0000001f 00000426 ... file-storage-675 [001] d..1 87.619305: cdns3_doorbell_epx: ep1out, ep_trbaddr c4003018 file-storage-675 [001] .... 87.619308: usb_ep_queue: ep1out: req 000000002ebce364 length 0/1024 sgs 0/0 stream 0 zsI status -115 --> 0 irq/144-5b13000-698 [000] d..1 87.619315: cdns3_epx_irq: IRQ for ep1out: 01000c80 TRBERR , ep_traddr: c4003018 ep_last_sid: 00000000 use_streams: 0 irq/144-5b13000-698 [000] d..1 87.619395: cdns3_usb_irq: IRQ 00000008 = Hot Reset Fixes: f616c3bda47e ("usb: cdns3: Fix dequeue implementation") Cc: stable <stable@vger.kernel.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cdns3: gadget: improve the set_configuration handlingPeter Chen1-1/+2
- Delete the duplicated EP_CMD_ERDY and EP_CMD_REQ_CMPL setting - Prepare the next setup before setting EP_CMD_ERDY and EP_CMD_REQ_CMPL, it could avoid a bug that DMA hang at EP0 OUT for DEV_VER_NXP_V1 - Delete the duplicated cdns3_set_hw_configuration calling at cdns3_req_ep0_set_configuration, the composite.c will handle this request, and call .ep0_queue back, and at .ep_queue it will call cdns3_set_hw_configuration. - Move cdns3_allow_enable_l1 into cdns3_set_hw_configuration since it is part of this function. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-10usb: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707195607.GA4198@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: cdns3: gadget: Fix a bunch of kernel doc issuesLee Jones1-5/+6
Mainline misspelled function argument descriptions. Also one formatting issue with a missing '@' identifier. Fixes the following W=1 build warnings: drivers/usb/cdns3/gadget.c:653: warning: Function parameter or member 'priv_ep' not described in 'cdns3_wa2_descmissing_packet' drivers/usb/cdns3/gadget.c:653: warning: Excess function parameter 'priv_dev' description in 'cdns3_wa2_descmissing_packet' drivers/usb/cdns3/gadget.c:1088: warning: Function parameter or member 'request' not described in 'cdns3_ep_run_transfer' drivers/usb/cdns3/gadget.c:2574: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_set_halt' drivers/usb/cdns3/gadget.c:2574: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_set_halt' drivers/usb/cdns3/gadget.c:2595: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_clear_halt' drivers/usb/cdns3/gadget.c:2595: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_clear_halt' drivers/usb/cdns3/gadget.c:2898: warning: Function parameter or member 'priv_dev' not described in 'cdns3_init_eps' drivers/usb/cdns3/gadget.c:2898: warning: Excess function parameter 'cdns3' description in 'cdns3_init_eps' drivers/usb/cdns3/gadget.c:3210: warning: Function parameter or member 'cdns' not described in 'cdns3_gadget_init' Cc: Pawel Laszczak <pawell@cadence.com> Cc: Pawel Jez <pjez@cadence.com> Cc: Peter Chen <peter.chen@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-18-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-01usb: cdns3: gadget: use unsigned int for 32-bit numberPeter Chen1-1/+1
If it is 'int', it can't stands for the highest bit for 32-bit number, since the largest 'int' is 0x7fffffff. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Acked-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20200623031001.8469-4-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-01usb: cdns3: gadget: unsigned int is dereferenced as a wider unsigned longPeter Chen1-2/+2
It is reported by Coverity scan, and fixed it by declare the reg as unsigned long. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Acked-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20200623031001.8469-3-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-27usb: cdns3: gadget: Replace trace_printk by dev_dbgNicolas Boichat1-1/+1
trace_printk should not be used in production code, replace it call with dev_dbg. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Link: https://lore.kernel.org/r/20200627070307.516803-2-drinkcat@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-25Merge tag 'usb-for-v5.8' of ↵Greg Kroah-Hartman1-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.8 merge window Rather busy cycle. We have a total 99 non-merge commits going into v5.8 merge window. The majority of the changes are in dwc3 this around (31.7% of all changes). It's composed mostly Thinh's recent updates to get dwc3 to behave correctly with stream transfers. We have also have Roger's for Keystone platforms and Neil's updates for the meson glue layer. Apart from those, we have the usual set of non-critical fixes, new device IDs, spelling fixes all over the place. Signed-off-by: Felipe Balbi <balbi@kernel.org> * tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (99 commits) usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML usb: dwc3: gadget: Check for prepared TRBs usb: gadget: Fix issue with config_ep_by_speed function usb: cdns3: ep0: delete the redundant status stage usb: dwc2: Update Core Reset programming flow. usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe() usb: gadget: fix potential double-free in m66592_probe. usb: cdns3: Fix runtime PM imbalance on error usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check usb: dwc3: Increase timeout for CmdAct cleared by device controller USB: dummy-hcd: use configurable endpoint naming scheme usb: cdns3: gadget: assign interrupt number to USB gadget structure usb: gadget: core: sync interrupt before unbind the udc arm64: dts: qcom: sc7180: Add interconnect properties for USB arm64: dts: qcom: sdm845: Add interconnect properties for USB dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver ARM: dts: at91: Remove the USB EP child node dt-bindings: usb: atmel: Mark EP child node as deprecated ...
2020-05-25usb: cdns3: gadget: assign interrupt number to USB gadget structurePeter Chen1-0/+1
Assign interrupt number to USB gadget structure. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-25usb: cdns3: change dev_info to dev_dbg for debug messagePeter Chen1-1/+1
During device mode initialization, lots of device information are printed to console, see below. Change them as debug message. cdns-usb3 5b130000.cdns3: Initialized ep0 support: cdns-usb3 5b130000.cdns3: Initialized ep1out support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep2out support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep3out support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep4out support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep5out support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep6out support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep7out support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep1in support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep2in support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep3in support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep4in support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep5in support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep6in support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep7in support: BULK, INT ISO Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-18Merge 5.7-rc6 into usb-nextGreg Kroah-Hartman1-1/+1
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14usb: cdns3: gadget: make a bunch of functions staticJason Yan1-10/+10
Fix the following sparse warning: drivers/usb/cdns3/gadget.c:85:6: warning: symbol 'cdns3_clear_register_bit' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:140:26: warning: symbol 'cdns3_next_align_buf' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:151:22: warning: symbol 'cdns3_next_priv_request' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:193:5: warning: symbol 'cdns3_ring_size' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:348:6: warning: symbol 'cdns3_move_deq_to_next_trb' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:514:20: warning: symbol 'cdns3_wa2_gadget_giveback' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:554:5: warning: symbol 'cdns3_wa2_gadget_ep_queue' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:839:6: warning: symbol 'cdns3_wa1_restore_cycle_bit' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:1907:6: warning: symbol 'cdns3_stream_ep_reconfig' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:1928:6: warning: symbol 'cdns3_configure_dmult' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-09usb: cdns3: gadget: prev_req->trb is NULL for ep0Peter Chen1-1/+1
And there are no multiple TRBs on EP0 and WA1 workaround, so it doesn't need to change TRB for EP0. It fixes below oops. configfs-gadget gadget: high-speed config #1: b android_work: sent uevent USB_STATE=CONFIGURED Unable to handle kernel read from unreadable memory at virtual address 0000000000000008 Mem abort info: android_work: sent uevent USB_STATE=DISCONNECTED ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000008b5bb7000 [0000000000000008] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 430 Comm: HwBinder:401_1 Not tainted 5.4.24-06071-g6fa8921409c1-dirty #77 Hardware name: Freescale i.MX8QXP MEK (DT) pstate: 60400085 (nZCv daIf +PAN -UAO) pc : cdns3_gadget_ep_dequeue+0x1d4/0x270 lr : cdns3_gadget_ep_dequeue+0x48/0x270 sp : ffff800012763ba0 x29: ffff800012763ba0 x28: ffff00082c653c00 x27: 0000000000000000 x26: ffff000068fa7b00 x25: ffff0000699b2000 x24: ffff00082c6ac000 x23: ffff000834f0a480 x22: ffff000834e87b9c x21: 0000000000000000 x20: ffff000834e87800 x19: ffff000069eddc00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000001 x11: ffff80001180fbe8 x10: 0000000000000001 x9 : ffff800012101558 x8 : 0000000000000001 x7 : 0000000000000006 x6 : ffff000835d9c668 x5 : ffff000834f0a4c8 x4 : 0000000096000000 x3 : 0000000000001810 x2 : 0000000000000000 x1 : ffff800024bd001c x0 : 0000000000000001 Call trace: cdns3_gadget_ep_dequeue+0x1d4/0x270 usb_ep_dequeue+0x34/0xf8 composite_dev_cleanup+0x154/0x170 configfs_composite_unbind+0x6c/0xa8 usb_gadget_remove_driver+0x44/0x70 usb_gadget_unregister_driver+0x74/0xe0 unregister_gadget+0x28/0x58 gadget_dev_desc_UDC_store+0x80/0x110 configfs_write_file+0x1e0/0x2a0 __vfs_write+0x48/0x90 vfs_write+0xe4/0x1c8 ksys_write+0x78/0x100 __arm64_sys_write+0x24/0x30 el0_svc_common.constprop.0+0x74/0x168 el0_svc_handler+0x34/0xa0 el0_svc+0x8/0xc Code: 52830203 b9407660 f94042e4 11000400 (b9400841) ---[ end trace 1574516e4c1772ca ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0002,20002008 Memory Limit: none Rebooting in 5 seconds.. Fixes: f616c3bda47e ("usb: cdns3: Fix dequeue implementation") Cc: stable <stable@vger.kernel.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-05usb: cdns3: mark local functions statickbuild test robot1-16/+16
Mark all local functions static to fix sparse warnings. Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-04-16usb: cdns3: gadget: make a bunch of functions staticJason Yan1-10/+10
Fix the following sparse warning: drivers/usb/cdns3/gadget.c:85:6: warning: symbol 'cdns3_clear_register_bit' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:140:26: warning: symbol 'cdns3_next_align_buf' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:151:22: warning: symbol 'cdns3_next_priv_request' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:193:5: warning: symbol 'cdns3_ring_size' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:348:6: warning: symbol 'cdns3_move_deq_to_next_trb' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:514:20: warning: symbol 'cdns3_wa2_gadget_giveback' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:554:5: warning: symbol 'cdns3_wa2_gadget_ep_queue' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:839:6: warning: symbol 'cdns3_wa1_restore_cycle_bit' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:1907:6: warning: symbol 'cdns3_stream_ep_reconfig' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:1928:6: warning: symbol 'cdns3_configure_dmult' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200402123837.5850-1-yanaijie@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16usb: cdns3: change dev_info to dev_dbg for debug messagePeter Chen1-1/+1
During device mode initialization, lots of device information are printed to console, see below. Change them as debug message. cdns-usb3 5b130000.cdns3: Initialized ep0 support: cdns-usb3 5b130000.cdns3: Initialized ep1out support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep2out support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep3out support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep4out support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep5out support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep6out support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep7out support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep1in support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep2in support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep3in support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep4in support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep5in support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep6in support: BULK, INT ISO cdns-usb3 5b130000.cdns3: Initialized ep7in support: BULK, INT ISO Signed-off-by: Peter Chen <peter.chen@nxp.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20200331081005.32752-4-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-10Merge 5.6-rc5 into usb-nextGreg Kroah-Hartman1-4/+15
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04usb: cdns3: gadget: toggle cycle bit before reset endpointPeter Chen1-3/+14
If there are TRBs pending during reset endpoint operation, the DMA will advance after reset operation, but it isn't expected, since the data is not yet available (For OUT, the data is not yet available). After the data is ready, there won't be any interrupt since the EP_TRADDR already points to next TRB entry and doorbell is not set. To fix it, it toggles cycle bit before reset operation, and restores it after reset, it could avoid unexpected DMA advance due to cycle bit is for software during the endpoint reset operation. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200219141455.23257-3-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04usb: cdns3: gadget: link trb should point to next requestPeter Chen1-1/+1
It has marked the dequeue trb as link trb, but its next segment pointer is still itself, it causes the transfer can't go on. Fix it by set its pointer as the trb address for the next request. Fixes: f616c3bda47e ("usb: cdns3: Fix dequeue implementation") Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200219141455.23257-2-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10usb: cdns3: remove redundant assignment to pointer trbColin Ian King1-1/+1
Pointer trb being assigned with a value that is never read, it is assigned a new value later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200208161802.28846-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: cdns3: Add streams support to cadence USB3 DRD driverJayshri Pawar1-45/+488
This patch includes streams implementation changes. The current changes has been validated on FPGA platform. Enabled streams related interrupts only for streams capable endpoints. Processed PRIME and IOT interrupts related to streams capable endpoints. Based on PRIME interrupt prime_flag is set and transfer is armed otherwise just adding request to the deferred request queue. For streams capable endpoints preparing TD with correct stream ID. TDL calculation: Updated tdl calculation based on controller versions. 1. For controller version DEV_VER_V2 :We have enabled USB_CONF2_EN_TDL_TRB bit in usb_conf2 register in DMULT configuration. This enables TDL calculation based on TRB, hence setting TDL in TRB. 2. For controller Version < DEV_VER_V2 : Writing TDL and STDL in ep_cmd register 3. For controller version > DEV_VER_V2 : Writing TDL in ep_tdl register. Writing ERDY with correct Stream ID to ep_cmd register. Added stream id related information to trace logs. Signed-off-by: Rahul Kumar <kurahul@cadence.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Jayshri Pawar <jpawar@cadence.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13Merge 5.5-rc6 into usb-nextGreg Kroah-Hartman1-9/+5
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: cdns3: gadget: Remove unneeded variable retXu Wang1-2/+1
Remove unneeded variable ret used to store return value,just return 0. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Acked-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/1576826378-4387-1-git-send-email-vulab@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: cdns3: should not use the same dev_id for shared interrupt handlerPeter Chen1-9/+5
Both drd and gadget interrupt handler use the struct cdns3 pointer as dev_id, it causes devm_free_irq at cdns3_gadget_exit doesn't free gadget's interrupt handler, it freed drd's handler. So, when the host interrupt occurs, the gadget's interrupt hanlder is still called, and causes below oops. To fix it, we use gadget's private data priv_dev as interrupt dev_id for gadget. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000380 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000971d79000 [0000000000000380] pgd=0000000971d6f003, pud=0000000971d6e003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: mxc_jpeg_encdec crct10dif_ce fsl_imx8_ddr_perf CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-03486-g69f4e7d9c54a-dirty #254 Hardware name: Freescale i.MX8QM MEK (DT) pstate: 00000085 (nzcv daIf -PAN -UAO) pc : cdns3_device_irq_handler+0x1c/0xb8 lr : __handle_irq_event_percpu+0x78/0x2c0 sp : ffff800010003e30 x29: ffff800010003e30 x28: ffff8000129bb000 x27: ffff8000126e9000 x26: ffff0008f61b5600 x25: ffff800011fe1018 x24: ffff8000126ea120 x23: ffff800010003f04 x22: 0000000000000000 x21: 0000000000000093 x20: ffff0008f61b5600 x19: ffff0008f5061a80 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 003d090000000000 x13: 00003d0900000000 x12: 0000000000000000 x11: 00003d0900000000 x10: 0000000000000040 x9 : ffff800012708cb8 x8 : ffff800012708cb0 x7 : ffff0008f7c7a9d0 x6 : 0000000000000000 x5 : ffff0008f7c7a910 x4 : ffff8008ed359000 x3 : ffff800010003f40 x2 : 0000000000000000 x1 : ffff0008f5061a80 x0 : ffff800010161a60 Call trace: cdns3_device_irq_handler+0x1c/0xb8 __handle_irq_event_percpu+0x78/0x2c0 handle_irq_event_percpu+0x40/0x98 handle_irq_event+0x4c/0xd0 handle_fasteoi_irq+0xbc/0x168 generic_handle_irq+0x34/0x50 __handle_domain_irq+0x6c/0xc0 gic_handle_irq+0xd4/0x174 el1_irq+0xb8/0x180 arch_cpu_idle+0x3c/0x230 default_idle_call+0x38/0x40 do_idle+0x20c/0x298 cpu_startup_entry+0x28/0x48 rest_init+0xdc/0xe8 arch_call_rest_init+0x14/0x1c start_kernel+0x48c/0x4b8 Code: aa0103f3 aa1e03e0 d503201f f9409662 (f941c040) ---[ end trace 091dcf4dee011b0e ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0002,2100600c Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: <stable@vger.kernel.org> #v5.4 Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/1577437804-18146-1-git-send-email-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-30usb: cdns3: gadget: Fix g_audio use case when connected to Super-Speed hostRoger Quadros1-5/+26
Take into account gadget driver's speed limit when programming controller speed. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20191030121607.21739-1-rogerq@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-30usb: cdns3: gadget: reset EP_CLAIMED flag while unloadingSanket Parmar1-0/+2
EP_CLAIMED flag is used to track the claimed endpoints. While unloading the module, Reset EP_CLAIMED flag for all enabled endpoints. So that it can be reused. Signed-off-by: Sanket Parmar <sparmar@cadence.com> Acked-by: Peter Chen <peter.chen@nxp.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/20191029122441.5816-1-sparmar@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-27usb: cdns3: gadget: Don't manage pullupsRoger Quadros1-4/+0
The USB gadget core is supposed to manage pullups of the controller. Don't manage pullups from within the controller driver. Otherwise, function drivers are not able to keep the controller disconnected from the bus till they are ready. (e.g. g_webcam) Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-15usb: cdns3: Fix dequeue implementation.Pawel Laszczak1-15/+20
Dequeuing implementation in cdns3_gadget_ep_dequeue gets first request from deferred_req_list and changed TRB associated with it to LINK TRB. This approach is incorrect because deferred_req_list contains requests that have not been placed on hardware RING. In this case driver should just giveback this request to gadget driver. The patch implements new approach that first checks where dequeuing request is located and only when it's on Transfer Ring then changes TRB associated with it to LINK TRB. During processing completed transfers such LINK TRB will be ignored. Reported-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/1570958420-22196-1-git-send-email-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10usb: cdns3: Fix for incorrect DMA mask.Pawel Laszczak1-0/+7
This patch restores the correct DMA mask after switching back to device mode. The issue occurred because Device part of controller use 32 bits DMA and Host side use 64 bits DMA. During loading XHCI driver the DMA mask used by driver is overwritten by XHCI driver so it must be restored to 32 bits. Reported-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reviewed-by: Peter Chen <peter.chen@nxp.com> Tested-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/1570449803-15299-1-git-send-email-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10usb: cdns3: gadget: Fix full-speed modeRoger Quadros1-0/+1
We need to disable USB3 PHY for full-speed mode else gadget mode is broken. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20191007121601.25996-3-rogerq@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-03usb: cdns3: fix spelling mistake: "cnfiguration" -> "configuration"Colin Ian King1-1/+1
There is a spelling mistake in a dev_dbg message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190903120710.30128-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-03usb: cdns3: fix missing assignment of ret before error check on retColin Ian King1-3/+3
Currently the check on a non-zero return code in ret is false because ret has been initialized to zero. I believe that ret should be assigned to the return from the call to readl_poll_timeout_atomic before the check on ret. Since ret is being re-assinged the original initialization of ret to zero can be removed. Addresses-Coverity: ("'Constant' variable guards dead code") Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190902145035.18200-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-03usb: cdns3: remove redundant assignment to ret on error exit pathColin Ian King1-3/+1
In the case where an allocation fails for priv_ep ret is assigned -ENOMEM and the code exits via the exit path 'err'. The exit path returns -ENOMEM without using variable ret, so the assingment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190902184334.27406-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 00:24:23 +0300