| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Introduce a local variable for the expression hba->active_uic_cmd.
Remove superfluous parentheses. No functionality has been changed.
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240912223019.3510966-3-bvanassche@acm.org
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Replace manual offset calculations for response_upiu and prd_table in
ufshcd_init_lrb() with pre-calculated offsets already stored in the
utp_transfer_req_desc structure. The pre-calculated offsets are set
differently in ufshcd_host_memory_configure() based on the
UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk, ensuring correct alignment and
access.
Fixes: 26f968d7de82 ("scsi: ufs: Introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk")
Cc: stable@vger.kernel.org
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240910044543.3812642-1-avri.altman@wdc.com
Acked-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, smartpqi, NCR5380, mac_scsi, lpfc,
mpi3mr).
There are no user visible core changes and a whole series of minor
updates and fixes. The largest core change is probably the
simplification of the workqueue allocation path"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (86 commits)
scsi: smartpqi: update driver version to 2.1.30-031
scsi: smartpqi: fix volume size updates
scsi: smartpqi: fix rare system hang during LUN reset
scsi: smartpqi: add new controller PCI IDs
scsi: smartpqi: add counter for parity write stream requests
scsi: smartpqi: correct stream detection
scsi: smartpqi: Add fw log to kdump
scsi: bnx2fc: Remove some unused fields in struct bnx2fc_rport
scsi: qla2xxx: Remove the unused 'del_list_entry' field in struct fc_port
scsi: ufs: core: Remove ufshcd_urgent_bkops()
scsi: core: Remove obsoleted declaration for scsi_driverbyte_string()
scsi: bnx2i: Remove unused declarations
scsi: core: Simplify an alloc_workqueue() invocation
scsi: ufs: Simplify alloc*_workqueue() invocation
scsi: stex: Simplify an alloc_ordered_workqueue() invocation
scsi: scsi_transport_fc: Simplify alloc_workqueue() invocations
scsi: snic: Simplify alloc_workqueue() invocations
scsi: qedi: Simplify an alloc_workqueue() invocation
scsi: qedf: Simplify alloc_workqueue() invocations
scsi: myrs: Simplify an alloc_ordered_workqueue() invocation
...
|
|
Commit 8db8f6ce556a ("scsi: ufs: qcom: Add missing interconnect bandwidth
values for Gear 5") updated the ufs_qcom_bw_table for Gear 5. However, it
missed updating the cfg_bw value for the max mode.
Hence update the cfg_bw value for the max mode for UFS 4.x devices.
Fixes: 8db8f6ce556a ("scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5")
Cc: stable@vger.kernel.org
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Link: https://lore.kernel.org/r/20240903063709.4335-1-quic_mapa@quicinc.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The fault-inject.h users across the kernel need to add a lot of #ifdef
CONFIG_FAULT_INJECTION to cater for shortcomings in the header. Make
fault-inject.h self-contained for CONFIG_FAULT_INJECTION=n, and add stubs
for DECLARE_FAULT_ATTR(), setup_fault_attr(), should_fail_ex(), and
should_fail() to allow removal of conditional compilation.
[akpm@linux-foundation.org: repair fallout from no longer including debugfs.h into fault-inject.h]
[akpm@linux-foundation.org: fix drivers/misc/xilinx_tmr_inject.c]
[akpm@linux-foundation.org: Add debugfs.h inclusion to more files, per Stephen]
Link: https://lkml.kernel.org/r/20240813121237.2382534-1-jani.nikula@intel.com
Fixes: 6ff1cb355e62 ("[PATCH] fault-injection capabilities infrastructure")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
MT8183 implements the UFSHCI 2.1 spec but reports a bogus value of 1 in
the reserved part for the Legacy Single Doorbell Support (LSDBS)
capability.
Set UFSHCD_QUIRK_BROKEN_LSDBS_CAP when MCQ support is explicitly
disabled, allowing the device to be properly registered.
Signed-off-by: Mary Guillemard <mary@mary.zone>
Link: https://lore.kernel.org/r/20240818222442.44990-3-mary@mary.zone
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_urgent_bkops() is a wrapper function. It only calls
ufshcd_bkops_ctrl(). Remove it to simplify the ufs core driver. Replace any
references to ufshcd_urgent_bkops() with ufshcd_bkops_ctrl().
In addition, remove the second parameter in the ufshcd_bkops_ctrl() because
the information can be retrieved from the first parameter.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/0c7f2c8d68408e39c28e3e81addce09cc0ee3969.1724800328.git.quic_nguyenb@quicinc.com
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
Multiple SCSI drivers use snprintf() to format a workqueue name before
invoking one of the create*_workqueue() macros. This patch series
simplifies such code by passing the format string and arguments to
alloc_workqueue(). Additionally, the structure members that are only
used as a temporary buffer for formatting workqueue names are
removed. Please consider this patch series for the next merge window.
Thanks,
Bart.
Link: https://lore.kernel.org/r/20240822195944.654691-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc*_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-18-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The workqueue maintainer wants to remove the create*_workqueue() macros
because these macros always set the WQ_MEM_RECLAIM flag and because these
only support literal workqueue names. Hence this patch that replaces the
create*_workqueue() invocations with the definition of this macro. The
WQ_MEM_RECLAIM flag has been retained because I think that flag is necessary
for workqueues created by storage drivers. This patch has been generated by
running spatch and git clang-format. spatch has been invoked as follows:
spatch --in-place --sp-file expand-create-workqueue.spatch $(git grep -lEw 'create_(freezable_|singlethread_|)workqueue' */scsi */ufs)
The contents of the expand-create-workqueue.spatch file is as follows:
@@
expression name;
@@
-create_workqueue(name)
+alloc_workqueue("%s", WQ_MEM_RECLAIM, 1, name)
@@
expression name;
@@
-create_freezable_workqueue(name)
+alloc_workqueue("%s", WQ_FREEZABLE | WQ_UNBOUND | WQ_MEM_RECLAIM, 1, name)
@@
expression name;
@@
-create_singlethread_workqueue(name)
+alloc_ordered_workqueue("%s", WQ_MEM_RECLAIM, name)
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFS trace events are called exclusively from the UFS core drivers. Make
those events private to the core driver.
The MAINTAINERS file does not need updating as the maintainership remains
the same and the relevant directory is already covered.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240821055411.3128159-1-avri.altman@wdc.com
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
SM8550 SoC has the UFSHCI 4.0 compliant UFS controller and only supports
legacy single doorbell mode without MCQ. But due to a hardware bug, it
reports 1 in the 'Legacy Queue & Single Doorbell Support (LSDBS)' field of
the Controller Capabilities register. This field is supposed to read as 0
if legacy single doorbell mode is supported and 1 otherwise.
Starting with commit 0c60eb0cc320 ("scsi: ufs: core: Check LSDBS cap when
!mcq"), ufshcd driver is now relying on the LSDBS field to decide when to
use the legacy doorbell mode if MCQ is not supported. And this ends up
breaking UFS on SM8550:
ufshcd-qcom 1d84000.ufs: ufshcd_init: failed to initialize (legacy doorbell mode not supported)
ufshcd-qcom 1d84000.ufs: error -EINVAL: Initialization failed with error -22
So use the UFSHCD_QUIRK_BROKEN_LSDBS_CAP quirk for SM8550 SoC so that the
ufshcd driver could use legacy doorbell mode correctly.
Fixes: 0c60eb0cc320 ("scsi: ufs: core: Check LSDBS cap when !mcq")
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240816-ufs-bug-fix-v3-2-e6fe0e18e2a3@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
capabilities register
'Legacy Queue & Single Doorbell Support (LSDBS)' field in the controller
capabilities register is supposed to report whether the legacy single
doorbell mode is supported in the controller or not. But some controllers
report '1' in this field which corresponds to 'LSDB not supported', but
they indeed support LSDB. So let's add a quirk to handle those controllers.
If the quirk is enabled by the controller driver, then LSDBS register field
will be ignored and legacy single doorbell mode is assumed to be enabled
always.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240816-ufs-bug-fix-v3-1-e6fe0e18e2a3@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The "sz" variable needs to be a signed type for the error handling to work
as intended. Fortunately, there is some sanity checking on "sz" on the
next line, so negative values would be caught and it doesn't really affect
runtime.
Fixes: eab0dce11dd9 ("scsi: ufs: ufshcd-pltfrm: Use of_property_count_u32_elems() to get property length")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/404a4727-89c6-410b-9ece-301fa399d4db@stanley.mountain
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The standard register map of UFSHCI is comprised of several groups. The
first group (starting from offset 0x00), is the host capabilities group.
It contains some interesting information that otherwise is not available,
e.g. the UFS version of the platform etc.
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240811143757.2538212-3-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Prepare so we'll be able to read various other HCI registers. While at it,
fix the HCPID & HCMID register names to stand for what they really are.
Also replace the pm_runtime_{get/put}_sync() calls in auto_hibern8_show to
ufshcd_rpm_{get/put}_sync() as any host controller register reads should.
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240811143757.2538212-2-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
length
Replace of_get_property() with the type specific
of_property_count_u32_elems() to get the property length.
This is part of a larger effort to remove callers of of_get_property() and
similar functions. of_get_property() leaks the DT property data pointer
which is a problem for dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240808170704.1438658-1-robh@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use of_property_present() to test for property presence rather than
of_find_property(). This is part of a larger effort to remove callers of
of_find_property() and similar functions. of_find_property() leaks the DT
struct property and data pointers which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240808170644.1436991-1-robh@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The default UIC command timeout still remains 500ms. Allow platform
drivers to override the UIC command timeout if desired.
In a real product, the 500ms timeout value is probably good enough.
However, during the product development where there are a lot of logging
and debug messages being printed to the UART console, interrupt starvations
happen occasionally because the UART may print long debug messages from
different modules in the system. While printing, the UART may have
interrupts disabled for more than 500ms, causing UIC command timeout. The
UIC command timeout would trigger more printing from the UFS driver, and
eventually a watchdog timeout may occur unnecessarily.
Add support for overriding the UIC command timeout value with the newly
created uic_cmd_timeout kernel module parameter. Default value is
500ms. Supported values range from 500ms to 2 seconds.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/e4e1c87f3f867f270a3d4b5d57a00139ff0e9741.1721792309.git.quic_nguyenb@quicinc.com
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The ufshcd_add_delay_before_dme_cmd() always introduces a delay of
MIN_DELAY_BEFORE_DME_CMDS_US between DME commands even when it's not
required. The delay is added when the UFS host controller supplies the
quirk UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS.
Fix the logic to update hba->last_dme_cmd_tstamp to ensure subsequent DME
commands have the correct delay in the range of 0 to
MIN_DELAY_BEFORE_DME_CMDS_US.
Update the timestamp at the end of the function to ensure it captures the
latest time after any necessary delay has been applied.
Signed-off-by: Vamshi Gajjela <vamshigajjela@google.com>
Link: https://lore.kernel.org/r/20240724135126.1786126-1-vamshigajjela@google.com
Fixes: cad2e03d8607 ("ufs: add support to allow non standard behaviours (quirks)")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull outstanding commits from 6.11 queue into fixes.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If exynos_ufs_fmp_init() did not enable FMP support, then
exynos_ufs_fmp_resume() should not execute the FMP-related SMC calls.
Fixes: c96499fcb403 ("scsi: ufs: exynos: Add support for Flash Memory Protector (FMP)")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240721183840.209284-1-ebiggers@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFS link is just put into hibern8 state during the 'freeze' process of the
hibernation. Afterwards, the system may get powered down. But that doesn't
matter during wakeup. Because during wakeup from hibernation, UFS link is
again put into hibern8 state by the restore kernel and then the control is
handed over to the to image kernel.
So in both the places, UFS link is never turned OFF. But
ufshcd_system_restore() just assumes that the link will be in OFF state and
sets the link state accordingly. And this breaks hibernation wakeup:
[ 2445.371335] phy phy-1d87000.phy.3: phy_power_on was called before phy_init
[ 2445.427883] ufshcd-qcom 1d84000.ufshc: Controller enable failed
[ 2445.427890] ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5
[ 2445.427906] ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: -5
[ 2445.427918] ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_restore returns -5
[ 2445.427973] ufs_device_wlun 0:0:0:49488: PM: failed to restore async: error -5
So fix the issue by removing the code that sets the link to OFF state.
Cc: Anjana Hari <quic_ahari@quicinc.com>
Cc: stable@vger.kernel.org # 6.3
Fixes: 88441a8d355d ("scsi: ufs: core: Add hibernation callbacks")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240718170659.201647-1-manivannan.sadhasivam@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr) plus some
misc small fixes.
The only core changes are to both bsg and scsi to pass in the device
instead of setting it afterwards as q->queuedata, so no functional
change"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (69 commits)
scsi: aha152x: Use DECLARE_COMPLETION_ONSTACK for non-constant completion
scsi: qla2xxx: Convert comma to semicolon
scsi: qla2xxx: Update version to 10.02.09.300-k
scsi: qla2xxx: Use QP lock to search for bsg
scsi: qla2xxx: Reduce fabric scan duplicate code
scsi: qla2xxx: Fix optrom version displayed in FDMI
scsi: qla2xxx: During vport delete send async logout explicitly
scsi: qla2xxx: Complete command early within lock
scsi: qla2xxx: Fix flash read failure
scsi: qla2xxx: Return ENOBUFS if sg_cnt is more than one for ELS cmds
scsi: qla2xxx: Fix for possible memory corruption
scsi: qla2xxx: validate nvme_local_port correctly
scsi: qla2xxx: Unable to act on RSCN for port online
scsi: ufs: exynos: Add support for Flash Memory Protector (FMP)
scsi: ufs: core: Add UFSHCD_QUIRK_KEYS_IN_PRDT
scsi: ufs: core: Add fill_crypto_prdt variant op
scsi: ufs: core: Add UFSHCD_QUIRK_BROKEN_CRYPTO_ENABLE
scsi: ufs: core: fold ufshcd_clear_keyslot() into its caller
scsi: ufs: core: Add UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE
scsi: ufs: mcq: Make .get_hba_mac() optional
...
|
|
There is a deadlock when runtime suspend waits for the flush of RTC work,
and the RTC work calls ufshcd_rpm_get_sync() to wait for runtime resume.
Here is deadlock backtrace:
kworker/0:1 D 4892.876354 10 10971 4859 0x4208060 0x8 10 0 120 670730152367
ptr f0ffff80c2e40000 0 1 0x00000001 0x000000ff 0x000000ff 0x000000ff
<ffffffee5e71ddb0> __switch_to+0x1a8/0x2d4
<ffffffee5e71e604> __schedule+0x684/0xa98
<ffffffee5e71ea60> schedule+0x48/0xc8
<ffffffee5e725f78> schedule_timeout+0x48/0x170
<ffffffee5e71fb74> do_wait_for_common+0x108/0x1b0
<ffffffee5e71efe0> wait_for_completion+0x44/0x60
<ffffffee5d6de968> __flush_work+0x39c/0x424
<ffffffee5d6decc0> __cancel_work_sync+0xd8/0x208
<ffffffee5d6dee2c> cancel_delayed_work_sync+0x14/0x28
<ffffffee5e2551b8> __ufshcd_wl_suspend+0x19c/0x480
<ffffffee5e255fb8> ufshcd_wl_runtime_suspend+0x3c/0x1d4
<ffffffee5dffd80c> scsi_runtime_suspend+0x78/0xc8
<ffffffee5df93580> __rpm_callback+0x94/0x3e0
<ffffffee5df90b0c> rpm_suspend+0x2d4/0x65c
<ffffffee5df91448> __pm_runtime_suspend+0x80/0x114
<ffffffee5dffd95c> scsi_runtime_idle+0x38/0x6c
<ffffffee5df912f4> rpm_idle+0x264/0x338
<ffffffee5df90f14> __pm_runtime_idle+0x80/0x110
<ffffffee5e24ce44> ufshcd_rtc_work+0x128/0x1e4
<ffffffee5d6e3a40> process_one_work+0x26c/0x650
<ffffffee5d6e65c8> worker_thread+0x260/0x3d8
<ffffffee5d6edec8> kthread+0x110/0x134
<ffffffee5d616b18> ret_from_fork+0x10/0x20
Skip updating RTC if RPM state is not RPM_ACTIVE.
Fixes: 6bf999e0eb41 ("scsi: ufs: core: Add UFS RTC support")
Cc: stable@vger.kernel.org # 6.9.x
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240715063831.29792-1-peter.wang@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If force_reset is true, bypass quick recovery. This will shorten error
recovery time.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240712094506.11284-1-peter.wang@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If the user sets use_mcq_mode to 0, the host will try to activate the LSDB
mode unconditionally even when the LSDBS of device HCI cap is 1. This makes
commands time out and causes device probing to fail.
To prevent that problem, check the LSDBS cap when MCQ is not supported.
Signed-off-by: Kyoungrul Kim <k831.kim@samsung.com>
Link: https://lore.kernel.org/r/20240709232520epcms2p8ebdb5c4fccc30a6221390566589bf122@epcms2p8
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
|
|
Eric Biggers <ebiggers@kernel.org> says:
Add support for Flash Memory Protector (FMP), which is the inline
encryption hardware on Exynos and Exynos-based SoCs.
Specifically, add support for the "traditional FMP mode" that works on
many Exynos-based SoCs including gs101. This is the mode that uses
"software keys" and is compatible with the upstream kernel's existing
inline encryption framework in the block and filesystem layers. I
plan to add support for the wrapped key support on gs101 at a later
time.
Tested on gs101 (specifically Pixel 6) by running the 'encrypt' group
of xfstests on a filesystem mounted with the 'inlinecrypt' mount
option.
This patchset applies to v6.10-rc6, and it has no prerequisites that
aren't already upstream.
Link: https://lore.kernel.org/r/20240708235330.103590-1-ebiggers@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for Flash Memory Protector (FMP), which is the inline
encryption hardware on Exynos and Exynos-based SoCs.
Specifically, add support for the "traditional FMP mode" that works on many
Exynos-based SoCs including gs101. This is the mode that uses "software
keys" and is compatible with the upstream kernel's existing inline
encryption framework in the block and filesystem layers. I plan to add
support for the wrapped key support on gs101 at a later time.
Tested on gs101 (specifically Pixel 6) by running the 'encrypt' group of
xfstests on a filesystem mounted with the 'inlinecrypt' mount option.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-7-ebiggers@kernel.org
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since the nonstandard inline encryption support on Exynos SoCs requires
that raw cryptographic keys be copied into the PRDT, it is desirable to
zeroize those keys after each request to keep them from being left in
memory. Therefore, add a quirk bit that enables the zeroization.
We could instead do the zeroization unconditionally. However, using a
quirk bit avoids adding the zeroization overhead to standard devices.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-6-ebiggers@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add a variant op to allow host drivers to initialize nonstandard
crypto-related fields in the PRDT. This is needed to support inline
encryption on the "Exynos" UFS controller.
Note that this will be used together with the support for overriding the
PRDT entry size that was already added by commit ada1e653a5ea ("scsi: ufs:
core: Allow UFS host drivers to override the sg entry size").
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-5-ebiggers@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add UFSHCD_QUIRK_BROKEN_CRYPTO_ENABLE which tells the UFS core to not use
the crypto enable bit defined by the UFS specification. This is needed to
support inline encryption on the "Exynos" UFS controller.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-4-ebiggers@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fold ufshcd_clear_keyslot() into its only remaining caller.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-3-ebiggers@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE which lets UFS host drivers
initialize the blk_crypto_profile themselves rather than have it be
initialized by ufshcd-core according to the UFSHCI standard. This is
needed to support inline encryption on the "Exynos" UFS controller which
has a nonstandard interface.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-2-ebiggers@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
Please consider this series of UFS driver patches for the next merge window.
Thank you,
Bart.
Link: https://lore.kernel.org/r/20240708211716.2827751-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in my fixes branch to resolve an mpi3mr merge conflict reported
by sfr.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFSHCI controllers that are compliant with the UFSHCI 4.0 standard report
the maximum number of supported commands in the controller capabilities
register. Use that value if .get_hba_mac == NULL.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-11-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make ufshcd_mcq_decide_queue_depth() easier to read by inlining
ufshcd_mcq_vops_get_hba_mac().
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-10-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the ufshcd_mcq_enable() call from inside ufshcd_config_mcq() to the
callers of this function. No functionality is changed by this patch. This
patch makes a later patch easier to read ("scsi: ufs: Make .get_hba_mac()
optional").
Cc: Peter Wang <peter.wang@mediatek.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-9-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the "hba->mcq_enabled = true" assignment to prevent that it gets
duplicated by a later patch that will introduce more ufshcd_mcq_enable()
calls. No functionality is changed by this patch.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-8-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Improve code readability by inlining is_mcq_enabled().
Cc: Peter Wang <peter.wang@mediatek.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-7-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the hba->reserved_slot and the host->can_queue assignments from
ufshcd_config_mcq() into ufshcd_alloc_mcq(). The advantages of this change
are as follows:
- It becomes easier to verify that these two parameters are updated if
hba->nutrs is updated.
- It prevents unnecessary assignments to these two parameters. While
ufshcd_config_mcq() is called during host reset, ufshcd_alloc_mcq() is
not.
Cc: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Rename this constant to prepare for the introduction of the
MASK_TRANSFER_REQUESTS_SLOTS_MCQ constant. The acronym "SDB" stands for
"single doorbell" (mode).
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The SCSI host template members .cmd_per_lun and .can_queue are copied into
the SCSI host data structure. Before these are used, these are overwritten
by ufshcd_init(). Hence, this patch does not change any functionality.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of first zero-initializing struct uic_command and next initializing
it memberwise, initialize all members at once.
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Several functions are declared in include/ufs/ufshcd.h and also in
drivers/ufs/core/ufshcd-priv.h. Remove the duplicate declarations.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-2-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
