summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2016-02-01Merge tag 'tty-4.5-rc2' of ↵Linus Torvalds4-11/+77
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty/serial driver fixes for 4.5-rc2. They resolve a number of reported problems (the ioctl one specifically has been pointed out by numerous people) and one patch adds some new device ids for the 8250_pci driver. All have been in linux-next successfully" * tag 'tty-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_pci: Add Intel Broadwell ports staging/speakup: Use tty_ldisc_ref() for paste kworker n_tty: Fix unsafe reference to "other" ldisc tty: Fix unsafe ldisc reference via ioctl(TIOCGETD) tty: Retry failed reopen if tty teardown in-progress tty: Wait interruptibly for tty lock on reopen
2016-02-01Merge tag 'staging-4.5-rc2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are some small staging driver fixes for 4.5-rc2. One of them predated 4.4-final, but I missed that merge window due to the holliday. The others fix reported issues that have come up recently. The tty change is needed for the speakup driver fix and has the ack of the tty driver maintainer as well, i.e. myself :) All have been in linux-next with no reported issues" * tag 'staging-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Staging: speakup: fix read scrolled-back VT Staging: speakup: Fix getting port information Revert "Staging: panel: usleep_range is preferred over udelay" iio: adis_buffer: Fix out-of-bounds memory access
2016-01-29serial: 8250_pci: Add Intel Broadwell portsMika Westerberg1-0/+29
Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as used on Intel Baytrail so we can reuse the existing Baytrail setup code. Add both Broadwell LPSS UART ports to the list of supported devices. Signed-off-by: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-29Staging: speakup: fix read scrolled-back VTSamuel Thibault1-0/+1
Previously, speakup would always read the non-scrolled part of the VT, even when the VT is scrolled back with shift-page. This patch makes vt.c export screen_pos so that speakup can use it to properly access the content of the scrolled-back VT. This was tested with both vgacon and fbcon. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27n_tty: Fix unsafe reference to "other" ldiscPeter Hurley1-5/+2
Although n_tty_check_unthrottle() has a valid ldisc reference (since the tty core gets the ldisc ref in tty_read() before calling the line discipline read() method), it does not have a valid ldisc reference to the "other" pty of a pty pair. Since getting an ldisc reference for tty->link essentially open-codes tty_wakeup(), just replace with the equivalent tty_wakeup(). Cc: <stable@vger.kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Fix unsafe ldisc reference via ioctl(TIOCGETD)Peter Hurley1-1/+23
ioctl(TIOCGETD) retrieves the line discipline id directly from the ldisc because the line discipline id (c_line) in termios is untrustworthy; userspace may have set termios via ioctl(TCSETS*) without actually changing the line discipline via ioctl(TIOCSETD). However, directly accessing the current ldisc via tty->ldisc is unsafe; the ldisc ptr dereferenced may be stale if the line discipline is changing via ioctl(TIOCSETD) or hangup. Wait for the line discipline reference (just like read() or write()) to retrieve the "current" line discipline id. Cc: <stable@vger.kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Retry failed reopen if tty teardown in-progressPeter Hurley1-4/+8
A small window exists where a tty reopen will observe the tty just prior to imminent teardown (tty->count == 0); in this case, open() returns EIO to userspace. Instead, retry the open after checking for signals and yielding; this interruptible retry loop allows teardown to commence and initialize a new tty on retry. Never retry the BSD master pty reopen; there is no guarantee the pty pair teardown is imminent since the slave file descriptors may remain open indefinitely. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Cc: stable <stable@vger.kernel.org> # 4.4 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Wait interruptibly for tty lock on reopenPeter Hurley2-1/+15
Allow a signal to interrupt the wait for a tty reopen; eg., if the tty has starting final close and is waiting for the device to drain. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Cc: stable <stable@vger.kernel.org> # 4.4 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-21Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...
2016-01-17Merge tag 'gpio-v4.5-1' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for v4.5. Notably there are big refactorings mostly by myself, aimed at getting the gpio_chip into a shape that makes me believe I can proceed to preserve state for a proper userspace ABI (character device) that has already been proposed once, but resulted in the feedback that I need to go back and restructure stuff. So I've been restructuring stuff. On the way I ran into brokenness (return code from the get_value() callback) and had to fix it. Also, refactored generic GPIO to be simpler. Some of that is still waiting to trickle down from the subsystems all over the kernel that provide random gpio_chips, I've touched every single GPIO driver in the kernel now, oh man I didn't know I was responsible for so much... Apart from that we're churning along as usual. I took some effort to test and retest so it should merge nicely and we shook out a couple of bugs in -next. Infrastructural changes: - In struct gpio_chip, rename the .dev node to .parent to better reflect the fact that this is not the GPIO struct device abstraction. We will add that soon so this would be totallt confusing. - It was noted that the driver .get_value() callbacks was sometimes reporting negative -ERR values to the gpiolib core, expecting them to be propagated to consumer gpiod_get_value() and gpio_get_value() calls. This was not happening, so as there was a mess of drivers returning negative errors and some returning "anything else than zero" to indicate that a line was active. As some would have bit 31 set to indicate "line active" it clashed with negative error codes. This is fixed by the largeish series clamping values in all drivers with !!value to [0,1] and then augmenting the code to propagate error codes to consumers. (Includes some ACKed patches in other subsystems.) - Add a void *data pointer to struct gpio_chip. The container_of() design pattern is indeed very nice, but we want to reform the struct gpio_chip to be a non-volative, stateless business, and keep states internal to the gpiolib to be able to hold on to the state when adding a proper userspace ABI (character device) further down the road. To achieve this, drivers need a handle at the internal state that is not dependent on their struct gpio_chip() so we add gpiochip_add_data() and gpiochip_get_data() following the pattern of many other subsystems. All the "use gpiochip data pointer" patches transforms drivers to this scheme. - The Generic GPIO chip header has been merged into the general <linux/gpio/driver.h> header, and the custom header for that removed. Instead of having a separate mm_gpio_chip struct for these generic drivers, merge that into struct gpio_chip, simplifying the code and removing the need for separate and confusing includes. Misc improvements: - Stabilize the way GPIOs are looked up from the ACPI legacy specification. - Incremental driver features for PXA, PCA953X, Lantiq (patches from the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48 New drivers: - Add a GPIO chip to the ALSA SoC AC97 driver. - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but the branch is merged here too to account for infrastructural changes). - The sx150x driver now supports the sx1502" * tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits) gpio: generic: make bgpio_pdata always visible gpiolib: fix chip order in gpio list gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs() gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs() gpio: brcmstb: Allow building driver for BMIPS_GENERIC gpio: brcmstb: Set endian flags for big-endian MIPS gpio: moxart: fix build regression gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs() leds: pca9532: use gpiochip data pointer leds: tca6507: use gpiochip data pointer hid: cp2112: use gpiochip data pointer bcma: gpio: use gpiochip data pointer avr32: gpio: use gpiochip data pointer video: fbdev: via: use gpiochip data pointer gpio: pch: Optimize pch_gpio_get() Revert "pinctrl: lantiq: Implement gpio_chip.to_irq" pinctrl: nsp-gpio: use gpiochip data pointer pinctrl: vt8500-wmt: use gpiochip data pointer pinctrl: exynos5440: use gpiochip data pointer pinctrl: at91-pio4: use gpiochip data pointer ...
2016-01-16Merge tag 'powerpc-4.5-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Core: - Ground work for the new Power9 MMU from Aneesh Kumar K.V - Optimise FP/VMX/VSX context switching from Anton Blanchard Misc: - Various cleanups from Krzysztof Kozlowski, John Ogness, Rashmica Gupta, Russell Currey, Gavin Shan, Daniel Axtens, Michael Neuling, Andrew Donnellan - Allow wrapper to work on non-english system from Laurent Vivier - Add rN aliases to the pt_regs_offset table from Rashmica Gupta - Fix module autoload for rackmeter & axonram drivers from Luis de Bethencourt - Include KVM guest test in all interrupt vectors from Paul Mackerras - Fix DSCR inheritance over fork() from Anton Blanchard - Make value-returning atomics & {cmp}xchg* & their atomic_ versions fully ordered from Boqun Feng - Print MSR TM bits in oops messages from Michael Neuling - Add TM signal return & invalid stack selftests from Michael Neuling - Limit EPOW reset event warnings from Vipin K Parashar - Remove the Cell QPACE code from Rashmica Gupta - Append linux_banner to exception information in xmon from Rashmica Gupta - Add selftest to check if VSRs are corrupted from Rashmica Gupta - Remove broken GregorianDay() from Daniel Axtens - Import Anton's context_switch2 benchmark into selftests from Michael Ellerman - Add selftest script to test HMI functionality from Daniel Axtens - Remove obsolete OPAL v2 support from Stewart Smith - Make enter_rtas() private from Michael Ellerman - PPR exception cleanups from Michael Ellerman - Add page soft dirty tracking from Laurent Dufour - Add support for Nvlink NPUs from Alistair Popple - Add support for kexec on 476fpe from Alistair Popple - Enable kernel CPU dlpar from sysfs from Nathan Fontenot - Copy only required pieces of the mm_context_t to the paca from Michael Neuling - Add a kmsg_dumper that flushes OPAL console output on panic from Russell Currey - Implement save_stack_trace_regs() to enable kprobe stack tracing from Steven Rostedt - Add HWCAP bits for Power9 from Michael Ellerman - Fix _PAGE_PTE breaking swapoff from Aneesh Kumar K.V - Fix _PAGE_SWP_SOFT_DIRTY breaking swapoff from Hugh Dickins - scripts/recordmcount.pl: support data in text section on powerpc from Ulrich Weigand - Handle R_PPC64_ENTRY relocations in modules from Ulrich Weigand cxl: - cxl: Fix possible idr warning when contexts are released from Vaibhav Jain - cxl: use correct operator when writing pcie config space values from Andrew Donnellan - cxl: Fix DSI misses when the context owning task exits from Vaibhav Jain - cxl: fix build for GCC 4.6.x from Brian Norris - cxl: use -Werror only with CONFIG_PPC_WERROR from Brian Norris - cxl: Enable PCI device ID for future IBM CXL adapter from Uma Krishnan Freescale: - Freescale updates from Scott: Highlights include moving QE code out of arch/powerpc (to be shared with arm), device tree updates, and minor fixes" * tag 'powerpc-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (149 commits) powerpc/module: Handle R_PPC64_ENTRY relocations scripts/recordmcount.pl: support data in text section on powerpc powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages powerpc/mm: fix _PAGE_SWP_SOFT_DIRTY breaking swapoff powerpc/mm: Fix _PAGE_PTE breaking swapoff cxl: Enable PCI device ID for future IBM CXL adapter cxl: use -Werror only with CONFIG_PPC_WERROR cxl: fix build for GCC 4.6.x powerpc: Add HWCAP bits for Power9 powerpc/powernv: Reserve PE#0 on NPU powerpc/powernv: Change NPU PE# assignment powerpc/powernv: Fix update of NVLink DMA mask powerpc/powernv: Remove misleading comment in pci.c powerpc: Implement save_stack_trace_regs() to enable kprobe stack tracing powerpc: Fix build break due to paca mm_context_t changes cxl: Fix DSI misses when the context owning task exits MAINTAINERS: Update Scott Wood's e-mail address powerpc/powernv: Fix minor off-by-one error in opal_mce_check_early_recovery() powerpc: Fix style of self-test config prompts powerpc/powernv: Only delay opal_rtc_read() retry when necessary ...
2016-01-13Merge tag 'tty-4.5-rc1' of ↵Linus Torvalds50-1399/+1194
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big serial/tty driver update for 4.5-rc1. Lots of driver updates and some tty core changes. All of these have been in linux-next and the details are in the shortlog" * tag 'tty-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (127 commits) drivers/tty/serial: delete unused MODULE_DEVICE_TABLE from atmel_serial.c serial: sh-sci: Remove cpufreq notifier to fix crash/deadlock serial: 8250: of: Fix the driver and actually compile the 8250_of tty: amba-pl011: use iotype instead of access_32b to track 32-bit I/O tty: amba-pl011: fix earlycon register offsets serial: sh-sci: Drop the sci_fck clock fallback sh: sh7734: Correct SCIF type for BRG sh: Remove sci_ick clock alias sh: Rename sci_ick and sci_fck clock to fck serial: sh-sci: Add support for optional BRG on (H)SCIF serial: sh-sci: Add support for optional external (H)SCK input serial: sh-sci: Prepare for multiple sampling clock sources serial: sh-sci: Correct SCIF type on R-Car for BRG serial: sh-sci: Correct SCIF type on RZ/A1H serial: sh-sci: Replace struct sci_port_info by type/regtype encoding serial: sh-sci: Add BRG register definitions serial: sh-sci: Take into account sampling rate for max baud rate serial: sh-sci: Merge sci_scbrr_calc() and sci_baud_calc_hscif() serial: sh-sci: Avoid calculating the receive margin for HSCIF serial: sh-sci: Improve bit rate error calculation for HSCIF ...
2016-01-09drivers/tty/serial: delete unused MODULE_DEVICE_TABLE from atmel_serial.cPaul Gortmaker1-2/+0
In commit c39dfebc7798956fd2140ae6321786ff35da30c3 ("drivers/tty/serial: make serial/atmel_serial.c explicitly non-modular") we removed the code relating to modular support since it currently only supports built in. However, when redoing my build coverage for mips allmodconfig, which sets CONFIG_OF, I noticed a remaining line that needs to be removed, else we will get a build failure for an undefined module macro. Unfortunately this didn't appear for any of the other arch I tested more frequently, such as ARM. Since MODULE_DEVICE_TABLE is a no-op for non-modular code, we can just remove the offending line. Fixes: c39dfebc7798 ("drivers/tty/serial: make serial/atmel_serial.c explicitly non-modular") Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jiri Slaby <jslaby@suse.com> Reported-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-08serial: sh-sci: Remove cpufreq notifier to fix crash/deadlockGeert Uytterhoeven1-42/+0
The BSP team noticed that there is spin/mutex lock issue on sh-sci when CPUFREQ is used. The issue is that the notifier function may call mutex_lock() while the spinlock is held, which can lead to a BUG(). This may happen if CPUFREQ is changed while another CPU calls clk_get_rate(). Taking the spinlock was added to the notifier function in commit e552de2413edad1a ("sh-sci: add platform device private data"), to protect the list of serial ports against modification during traversal. At that time the Common Clock Framework didn't exist yet, and clk_get_rate() just returned clk->rate without taking a mutex. Note that since commit d535a2305facf9b4 ("serial: sh-sci: Require a device per port mapping."), there's no longer a list of serial ports to traverse, and taking the spinlock became superfluous. To fix the issue, just remove the cpufreq notifier: 1. The notifier doesn't work correctly: all it does is update stored clock rates; it does not update the divider in the hardware. The divider will only be updated when calling sci_set_termios(). I believe this was broken back in 2004, when the old drivers/char/sh-sci.c driver (where the notifier did update the divider) was replaced by drivers/serial/sh-sci.c (where the notifier just updated port->uartclk). Cfr. full-history-linux commits 6f8deaef2e9675d9 ("[PATCH] sh: port sh-sci driver to the new API") and 3f73fe878dc9210a ("[PATCH] Remove old sh-sci driver"). 2. On modern SoCs, the sh-sci parent clock rate is no longer related to the CPU clock rate anyway, so using a cpufreq notifier is futile. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-08Merge branch 'scif-clk-sck-brg-for-v4.5' of ↵Greg Kroah-Hartman2-152/+413
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into tty-next Geert writes: Summary: - Clean up the naming of clocks in the sh-sci driver and its DT bindings, - Add support for the optional external clock on (H)SCI(F), where this pin can serve as a clock input, - Add support for the optional clock sources for the Baud Rate Generator for External Clock (BRG), as found on some SCIF variants and on HSCIF.
2016-01-08serial: 8250: of: Fix the driver and actually compile the 8250_ofPeter Ujfalusi2-3/+2
The 8250_of never compiled since in the Kconfig we have SERIAL_OF_PLATFORM but in the makefile we expect to have SERIAL_8250_OF... When the 8250_of.c is actually compiled we will have two errors: missing linux/nwpserial.h and 8250/8250.h. Fix those as well at the same time when enable the compilation of the driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Fixes: afd7f88f1577 ("serial: 8250: move of_serial code to 8250 directory") Reported-by: Guenter Roeck <linux@roeck-us.net> CC: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-07tty: amba-pl011: use iotype instead of access_32b to track 32-bit I/OTimur Tabi1-7/+9
Instead of defining a new field in the uart_amba_port structure, use the existing iotype field of the uart_port structure, which is intended for this purpose. If we need to use 32-bit register access, we set iotype to UPIO_MEM32, otherwise we set it to UPIO_MEM. For early console, specify the "mmio32" option on the kernel command-line. Example: earlycon=pl011,mmio32,0x3ced1000 Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-07tty: amba-pl011: fix earlycon register offsetsRussell King1-3/+3
The REG_x macros are indices into a table, not register offsets. Since earlycon does not have access to the vendor data, we can currently only support standard ARM PL011 devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Huang Shijie <shijie.huang@arm.com> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-06Merge branch 'for-mingo' of ↵Ingo Molnar1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU changes from Paul E. McKenney: - Adding transitivity uniformly to rcu_node structure ->lock acquisitions. (This is implemented by the first two commits on top of v4.4-rc2 due to the pervasive nature of this change.) - Documentation updates, including RCU requirements. - Expedited grace-period changes. - Miscellaneous fixes. - Linked-list fixes, courtesy of KTSAN. - Torture-test updates. - Late-breaking fix to sysrq-generated crash. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-12-30sysrq: Fix warning in sysrq generated crash.Ani Sinha1-0/+6
Commit 984d74a72076a1 ("sysrq: rcu-ify __handle_sysrq") replaced spin_lock_irqsave() calls with rcu_read_lock() calls in sysrq. Since rcu_read_lock() does not disable preemption, faulthandler_disabled() in __do_page_fault() in x86/fault.c returns false. When the code later calls might_sleep() in the pagefault handler, we get the following warning: BUG: sleeping function called from invalid context at ../arch/x86/mm/fault.c:1187 in_atomic(): 0, irqs_disabled(): 0, pid: 4706, name: bash Preemption disabled at:[<ffffffff81484339>] printk+0x48/0x4a To fix this, we release the RCU read lock before we crash. Tested this patch on linux 3.18 by booting off one of our boards. Fixes: 984d74a72076a1 ("sysrq: rcu-ify __handle_sysrq") Signed-off-by: Ani Sinha <ani@arista.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-12-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds1-5/+7
Pull sparc fixes from David Miller: 1) Finally make perf stack backtraces stable on sparc, several problems (mostly due to the context in which the user copies from the stack are done) contributed to this. From Rob Gardner. 2) Export ADI capability if the cpu supports it. 3) Hook up userfaultfd system call. 4) When faults happen during user copies we really have to clean up and restore the FPU state fully. Also from Rob Gardner * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: tty/serial: Skip 'NULL' char after console break when sysrq enabled sparc64: fix FP corruption in user copy functions sparc64: Perf should save/restore fault info sparc64: Ensure perf can access user stacks sparc64: Don't set %pil in rtrap_nmi too early sparc64: Add ADI capability to cpu capabilities tty: serial: constify sunhv_ops structs sparc: Hook up userfaultfd system call
2015-12-24tty/serial: Skip 'NULL' char after console break when sysrq enabledVijay Kumar1-2/+4
When sysrq is triggered from console, serial driver for SUN hypervisor console receives a console break and enables the sysrq. It expects a valid sysrq char following with break. Meanwhile if driver receives 'NULL' ASCII char then it disables sysrq and sysrq handler will never be invoked. This fix skips calling uart sysrq handler when 'NULL' is received while sysrq is enabled. Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Acked-by: Karl Volz <karl.volz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-24tty: serial: constify sunhv_ops structsAya Mahfouz1-3/+3
Constifies sunhv_ops structures in tty's serial driver since they are not modified after their initialization. Detected and found using Coccinelle. Suggested-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-23QE: Move QE from arch/powerpc to drivers/socZhao Qiang1-1/+1
ls1 has qe and ls1 has arm cpu. move qe from arch/powerpc to drivers/soc/fsl to adapt to powerpc and arm Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-12-22Merge tag 'qcom-soc-for-4.5' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers Qualcomm ARM Based SoC Updates for 4.5 * Add WCNSS_CTRL client * Various Kconfig changes to fix build issues * Update SoC Qualcomm MAINTAINERS entry * Add SMP2P, SMSM, and SMEM state machine drivers * Add SMD-RPM support for existing platforms * tag 'qcom-soc-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM soc: qcom: Introduce common SMEM state machine code Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-21Merge 4.4-rc6 into tty-nextGreg Kroah-Hartman5-17/+19
We want the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-21Merge tag 'v4.4-rc6' into develLinus Walleij14-27/+31
Linux 4.4-rc6
2015-12-17serial: sh-sci: Drop the sci_fck clock fallbackLaurent Pinchart1-5/+0
All platforms that used to define an sci_fck clock have now switched to the fck name. Remove the fallback code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Add support for optional BRG on (H)SCIFGeert Uytterhoeven1-5/+80
Add support for using the Baud Rate Generator for External Clock (BRG), as found on some SCIF and HSCIF variants, to provide the sampling clock. This can improve baud rate range and accuracy. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Add support for optional external (H)SCK inputGeert Uytterhoeven1-3/+66
Add support for using the SCIx clock pin "(H)SCK" as an external clock input on (H)SCI(F), providing the sampling clock. Note that this feature is not yet supported on the select SCIFA variants that also have it (e.g. sh7723, sh7724, and r8a7740). On (H)SCIF variants with an External Baud Rate Generator (BRG), the BRG Clock Select Register must be configured for the external clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Prepare for multiple sampling clock sourcesGeert Uytterhoeven1-60/+134
Refactor the clock and baud rate parameter code to ease adding support for multiple sampling clock sources. sci_scbrr_calc() now returns the bit rate error, so it can be compared to the bit rate error using other sampling clock sources. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Correct SCIF type on R-Car for BRGGeert Uytterhoeven1-0/+11
The "renesas,scif" compatible value is currently used for the SCIF variant in all Renesas SoCs of the R-Car family. However, the variant used in the R-Car family is not the common "SH-4(A)" variant, but a derivative with added "Baud Rate Generator for External Clock" (BRG), which is also present in sh7734. Use the family-specific SCIF compatible values for R-Car Gen1, Gen2, and Gen3 SoCs to differentiate. The "renesas,scif" compatible value can still be used as a common denominator for SCIF variants with the "SH-4(A)" register layout (i.e. ignoring the "Serial Extension Mode Register" (SCEMR) and the new BRG-specific registers). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Correct SCIF type on RZ/A1HGeert Uytterhoeven1-0/+6
The "renesas,scif" compatible value is currently used for the SCIF variant in all Renesas SoCs of the R-Car and RZ families. However, the variant used in the RZ family is not the common "SH-4(A)" variant, but the "SH-2(A) with FIFO data count register" variant, as it has the "Serial Extension Mode Register" (SCEMR), just like on sh7203, sh7263, sh7264, and sh7269. Use the (already documented) SoC-specific "renesas,scif-r7s72100" compatible value to differentiate. The "renesas,scif" compatible value can still be used as a common denominator for SCIF variants with the "SH-4(A)" register layout (i.e. ignoring the SCEMR register). Note that currently both variants are treated the same, but this may change if support for the SCEMR register is ever added. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Replace struct sci_port_info by type/regtype encodingGeert Uytterhoeven1-29/+11
Store the encoded port and register types directly in of_device_id.data, instead of using a pointer to a structure. This saves memory and simplifies the source code, especially when adding more compatible entries later. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Add BRG register definitionsGeert Uytterhoeven2-0/+56
Add register definitions for the Baud Rate Generator for External Clock (BRG), as found in some SCIF and in HSCIF, including a new regtype for the "SH-4(A)"-derived SCIF variant with BRG. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Take into account sampling rate for max baud rateGeert Uytterhoeven1-1/+4
The maximum baud rate depends on the sampling rate. HSCIF has a variable sampling rate and sets s->sampling_rate to zero, hence use the minimum sampling rate of 8. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Merge sci_scbrr_calc() and sci_baud_calc_hscif()Geert Uytterhoeven1-23/+19
For low bit rates, the for-loop that reduces the divider returned by sci_scbrr_calc() and picks the clock select value may terminate without finding suitable values, leading to out-of-range divider and clock select values. sci_baud_calc_hscif() doesn't suffer from this problem, as it correctly uses clamp(). Since there are only two relevant differences between HSCIF and other variants w.r.t. bit rate configuration (fixed vs. variable sample rate, and an additional factor of two), sci_scbrr_calc() and sci_baud_calc_hscif() can be merged, fixing the issue with out-of-range values. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Avoid calculating the receive margin for HSCIFGeert Uytterhoeven1-27/+24
When assuming D = 0.5 and F = 0, maximizing the receive margin M is equivalent to maximizing the sample rate N. Hence there's no need to calculate the receive margin, as we can obtain the same result by iterating over all possible sample rates in reverse order, and skipping parameter sets that don't provide a lower bit rate error. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Improve bit rate error calculation for HSCIFGeert Uytterhoeven1-13/+8
The algorithm to find the best parameters for the requested bit rate calculates the relative bit rate error, using "(br * scrate) / 1000". For small "br * scrate", this has two problems: - The quotient may be zero, leading to a division by zero error, - This may introduce a large rounding error. Switch from relative to absolute bit rate error calculation to fix this. The default baud rate generator values can be removed, as there will always be one set of values that gives the smallest absolute error. Print the best set of values when debugging. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Avoid overflow in sci_baud_calc_hscif()Geert Uytterhoeven1-6/+19
If bps >= 1048576, the multiplication of the predivider and "bps" will overflow, and both br and err will contain bogus values. Skip the current and all higher clock select predividers when overflow is detected. Simplify the calculations using intermediates while we're at it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Make unsigned values in sci_baud_calc_hscif() unsignedGeert Uytterhoeven1-5/+6
Move the -1 offset of br to the assignment to *brr, so br cannot become negative anymore, and update the clamp() call. Now all unsigned values in sci_baud_calc_hscif() can become unsigned. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Convert from clk_get() to devm_clk_get()Geert Uytterhoeven1-6/+4
Transfer clock cleanup handling to the core device management code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Don't overwrite clock selection in serial_console_write()Geert Uytterhoeven1-3/+5
Blindly writing the default configuration value into the SCSCR register may change the clock selection bits, breaking the serial console if the current driver settings differ from the default settings. Keep the current clock selection bits to prevent this from happening on e.g. r8a7791/koelsch when support for the BRG will be added. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Drop unused frame_len parameter for sci_baud_calc_hscif()Geert Uytterhoeven1-21/+3
As F is assumed to be zero in the receive margin formula, frame_len is not used. Remove it, together with the sci_baud_calc_frame_len() helper function. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Use existing local variable in sci_parse_dt()Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-12-17serial: sh-sci: Grammar s/Get ... for/Get ... from/Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Drop useless check for zero sampling_rateGeert Uytterhoeven1-7/+1
sci_port.sampling_rate is always non-zero, except for HSCIF, which uses sci_baud_calc_hscif() instead of sci_scbrr_calc(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17serial: sh-sci: Drop the interface clockLaurent Pinchart1-23/+41
As no platform defines an interface clock the SCI driver always falls back to a clock named "peripheral_clk". - On SH platforms that clock is the base clock for the SCI functional clock and has the same frequency, - On ARM platforms that clock doesn't exist, and clk_get() will return the default clock for the device. We can thus make the functional clock mandatory and drop the interface clock. EPROBE_DEFER is handled for clocks that may be referenced from DT (i.e. "fck", and the deprecated "sci_ick"). Cc: devicetree@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> [geert: Handle EPROBE_DEFER, reformat description, break long comment line] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-14serial: imx: implement handshaking using gpios with the mctrl_gpio helperUwe Kleine-König2-20/+70
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-14serial: mctrl_gpio: export mctrl_gpio_disable_ms and mctrl_gpio_initUwe Kleine-König1-0/+2
To be able to make use of the mctrl-gpio helper from a module these functions must be exported. This was forgotten in the commit introducing support interrupt handling for these functions (while it was done for mctrl_gpio_enable_ms, *sigh*). Fixes: ce59e48fdbad ("serial: mctrl_gpio: implement interrupt handling") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>