summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2021-07-09Merge tag 'for-linus-5.14-rc1' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - Support for optimized routines based on the host CPU - Support for PCI via virtio - Various fixes * tag 'for-linus-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: remove unneeded semicolon in um_arch.c um: Remove the repeated declaration um: fix error return code in winch_tramp() um: fix error return code in slip_open() um: Fix stack pointer alignment um: implement flush_cache_vmap/flush_cache_vunmap um: add a UML specific futex implementation um: enable the use of optimized xor routines in UML um: Add support for host CPU flags and alignment um: allow not setting extra rpaths in the linux binary um: virtio/pci: enable suspend/resume um: add PCI over virtio emulation driver um: irqs: allow invoking time-travel handler multiple times um: time-travel/signals: fix ndelay() in interrupt um: expose time-travel mode to userspace side um: export signals_enabled directly um: remove unused smp_sigio_handler() declaration lib: add iomem emulation (logic_iomem) um: allow disabling NO_IOMEM
2021-07-06Merge tag 'tty-5.14-rc1' of ↵Linus Torvalds79-3896/+1643
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver patches for 5.14-rc1. A bit more than normal, but nothing major, lots of cleanups. Highlights are: - lots of tty api cleanups and mxser driver cleanups from Jiri - build warning fixes - various serial driver updates - coding style cleanups - various tty driver minor fixes and updates - removal of broken and disable r3964 line discipline (finally!) All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits) serial: mvebu-uart: remove unused member nb from struct mvebu_uart arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART dt-bindings: mvebu-uart: fix documentation serial: mvebu-uart: correctly calculate minimal possible baudrate serial: mvebu-uart: do not allow changing baudrate when uartclk is not available serial: mvebu-uart: fix calculation of clock divisor tty: make linux/tty_flip.h self-contained serial: Prefer unsigned int to bare use of unsigned serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs serial: qcom_geni_serial: use DT aliases according to DT bindings Revert "tty: serial: Add UART driver for Cortina-Access platform" tty: serial: Add UART driver for Cortina-Access platform MAINTAINERS: add me back as mxser maintainer mxser: Documentation, fix typos mxser: Documentation, make the docs up-to-date mxser: Documentation, remove traces of callout device mxser: introduce mxser_16550A_or_MUST helper mxser: rename flags to old_speed in mxser_set_serial_info mxser: use port variable in mxser_set_serial_info mxser: access info->MCR under info->slock ...
2021-07-05Merge tag 'driver-core-5.14-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core changes from Greg KH: "Here is the small set of driver core and debugfs updates for 5.14-rc1. Included in here are: - debugfs api cleanups (touched some drivers) - devres updates - tiny driver core updates and tweaks Nothing major in here at all, and all have been in linux-next for a while with no reported issues" * tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits) docs: ABI: testing: sysfs-firmware-memmap: add some memmap types. devres: Enable trace events devres: No need to call remove_nodes() when there none present devres: Use list_for_each_safe_from() in remove_nodes() devres: Make locking straight forward in release_nodes() kernfs: move revalidate to be near lookup drivers/base: Constify static attribute_group structs firmware_loader: remove unneeded 'comma' macro devcoredump: remove contact information driver core: Drop helper devm_platform_ioremap_resource_wc() component: Rename 'dev' to 'parent' component: Drop 'dev' argument to component_match_realloc() device property: Don't check for NULL twice in the loops driver core: auxiliary bus: Fix typo in the docs drivers/base/node.c: make CACHE_ATTR define static DEVICE_ATTR_RO debugfs: remove return value of debugfs_create_ulong() debugfs: remove return value of debugfs_create_bool() scsi: snic: debugfs: remove local storage of debugfs files b43: don't save dentries for debugfs b43legacy: don't save dentries for debugfs ...
2021-07-05Merge tag 'char-misc-5.14-rc1' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big set of char / misc and other driver subsystem updates for 5.14-rc1. Included in here are: - habanalabs driver updates - fsl-mc driver updates - comedi driver updates - fpga driver updates - extcon driver updates - interconnect driver updates - mei driver updates - nvmem driver updates - phy driver updates - pnp driver updates - soundwire driver updates - lots of other tiny driver updates for char and misc drivers This is looking more and more like the "various driver subsystems mushed together" tree... All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits) mcb: Use DEFINE_RES_MEM() helper macro and fix the end address PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls bus: mhi: Wait for M2 state during system resume bus: mhi: core: Fix power down latency intel_th: Wait until port is in reset before programming it intel_th: msu: Make contiguous buffers uncached intel_th: Remove an unused exit point from intel_th_remove() stm class: Spelling fix nitro_enclaves: Set Bus Master for the NE PCI device misc: ibmasm: Modify matricies to matrices misc: vmw_vmci: return the correct errno code siox: Simplify error handling via dev_err_probe() fpga: machxo2-spi: Address warning about unused variable lkdtm/heap: Add init_on_alloc tests selftests/lkdtm: Enable various testable CONFIGs lkdtm: Add CONFIG hints in errors where possible lkdtm: Enable DOUBLE_FAULT on all architectures lkdtm/heap: Add vmalloc linear overflow test lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE ...
2021-07-04Merge tag 's390-5.14-1' of ↵Linus Torvalds1-51/+0
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Rework inline asm to get rid of error prone "register asm" constructs, which are problematic especially when code instrumentation is enabled. In particular introduce and use register pair union to allocate even/odd register pairs. Unfortunately this breaks compatibility with older clang compilers and minimum clang version for s390 has been raised to 13. https://lore.kernel.org/linux-next/CAK7LNARuSmPCEy-ak0erPrPTgZdGVypBROFhtw+=3spoGoYsyw@mail.gmail.com/ - Fix gcc 11 warnings, which triggered various minor reworks all over the code. - Add zstd kernel image compression support. - Rework boot CPU lowcore handling. - De-duplicate and move kernel memory layout setup logic earlier. - Few fixes in preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for mem functions. - Remove broken and unused power management support leftovers in s390 drivers. - Disable stack-protector for decompressor and purgatory to fix buildroot build. - Fix vt220 sclp console name to match the char device name. - Enable HAVE_IOREMAP_PROT and add zpci_set_irq()/zpci_clear_irq() in zPCI code. - Remove some implausible WARN_ON_ONCEs and remove arch specific counter transaction call backs in favour of default transaction handling in perf code. - Extend/add new uevents for online/config/mode state changes of AP card / queue device in zcrypt. - Minor entry and ccwgroup code improvements. - Other small various fixes and improvements all over the code. * tag 's390-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (91 commits) s390/dasd: use register pair instead of register asm s390/qdio: get rid of register asm s390/ioasm: use symbolic names for asm operands s390/ioasm: get rid of register asm s390/cmf: get rid of register asm s390/lib,string: get rid of register asm s390/lib,uaccess: get rid of register asm s390/string: get rid of register asm s390/cmpxchg: use register pair instead of register asm s390/mm,pages-states: get rid of register asm s390/lib,xor: get rid of register asm s390/timex: get rid of register asm s390/hypfs: use register pair instead of register asm s390/zcrypt: Switch to flexible array member s390/speculation: Use statically initialized const for instructions virtio/s390: get rid of open-coded kvm hypercall s390/pci: add zpci_set_irq()/zpci_clear_irq() scripts/min-tool-version.sh: Raise minimum clang version to 13.0.0 for s390 s390/ipl: use register pair instead of register asm s390/mem_detect: fix tprot() program check new psw handling ...
2021-07-02Merge tag 'powerpc-5.14-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - A big series refactoring parts of our KVM code, and converting some to C. - Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on some CPUs. - Support for the Microwatt soft-core. - Optimisations to our interrupt return path on 64-bit. - Support for userspace access to the NX GZIP accelerator on PowerVM on Power10. - Enable KUAP and KUEP by default on 32-bit Book3S CPUs. - Other smaller features, fixes & cleanups. Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand, Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe, Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei. * tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits) powerpc: Only build restart_table.c for 64s powerpc/64s: move ret_from_fork etc above __end_soft_masked powerpc/64s/interrupt: clean up interrupt return labels powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols powerpc/64: enable MSR[EE] in irq replay pt_regs powerpc/64s/interrupt: preserve regs->softe for NMI interrupts powerpc/64s: add a table of implicit soft-masked addresses powerpc/64e: remove implicit soft-masking and interrupt exit restart logic powerpc/64e: fix CONFIG_RELOCATABLE build warnings powerpc/64s: fix hash page fault interrupt handler powerpc/4xx: Fix setup_kuep() on SMP powerpc/32s: Fix setup_{kuap/kuep}() on SMP powerpc/interrupt: Use names in check_return_regs_valid() powerpc/interrupt: Also use exit_must_hard_disable() on PPC32 powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE powerpc/ptrace: Refactor regs_set_return_{msr/ip} powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip} powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi() powerpc/pseries/vas: Include irqdomain.h powerpc: mark local variables around longjmp as volatile ...
2021-06-25serial: mvebu-uart: remove unused member nb from struct mvebu_uartPali Rohár1-1/+0
Member nb in struct mvebu_uart is not set nor read. So remove it completely. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20210624224909.6350-7-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-25serial: mvebu-uart: correctly calculate minimal possible baudratePali Rohár1-3/+8
For default (x16) scheme which is currently used by mvebu-uart.c driver, maximal divisor of UART base clock is 1023*16. Therefore there is limit for minimal supported baudrate. This change calculate it correctly and prevents setting invalid divisor 0 into hardware registers. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate") Link: https://lore.kernel.org/r/20210624224909.6350-4-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-25serial: mvebu-uart: do not allow changing baudrate when uartclk is not availablePali Rohár1-3/+2
Testing mvuart->clk for non-error is not enough as mvuart->clk may contain valid clk pointer but when clk_prepare_enable(mvuart->clk) failed then port->uartclk is zero. When mvuart->clk is not available then port->uartclk is zero too. Parent clock rate port->uartclk is needed to calculate UART clock divisor and without it is not possible to change baudrate. So fix test condition when it is possible to change baudrate. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate") Link: https://lore.kernel.org/r/20210624224909.6350-3-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-25serial: mvebu-uart: fix calculation of clock divisorPali Rohár1-1/+1
The clock divisor should be rounded to the closest value. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate") Cc: stable@vger.kernel.org # 0e4cf69ede87 ("serial: mvebu-uart: clarify the baud rate derivation") Link: https://lore.kernel.org/r/20210624224909.6350-2-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24serial: Prefer unsigned int to bare use of unsignedJinchao Wang2-2/+2
Fix checkpatch warnings: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by: Jinchao Wang <wjc@cdjrlc.com> Link: https://lore.kernel.org/r/20210624021207.58059-1-wjc@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCsVignesh Raghavendra1-1/+19
On K3 family of SoCs (which includes AM654 SoC), it is observed that RX TIMEOUT is signalled after RX FIFO has been drained, in which case a dummy read of RX FIFO is required to clear RX TIMEOUT condition. Otherwise, this would lead to an interrupt storm. Fix this by introducing UART_RX_TIMEOUT_QUIRK flag and doing a dummy read in IRQ handler when RX TIMEOUT is reported with no data in RX FIFO. Fixes: be70874498f3 ("serial: 8250_omap: Add support for AM654 UART controller") Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20210622145704.11168-1-vigneshr@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24serial: qcom_geni_serial: use DT aliases according to DT bindingsDmitry Baryshkov1-1/+3
Device tree bindings do not specify "hsuart" aliases, instead all serial ports should use "serial" alias name as noted by Rob Herring [1]. Make qcom_geni_serial driver use "serial" alias and fallback to "hsuart" if one is not found. [1] https://lore.kernel.org/linux-arm-msm/6dd1f5cd-03c7-5945-9fa2-1c2698405110@linaro.org/ Cc: Rob Herring <robh+dt@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210621211528.1607516-1-dmitry.baryshkov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24Revert "tty: serial: Add UART driver for Cortina-Access platform"Greg Kroah-Hartman3-818/+0
This reverts commit b61c8bf4694b5115766849378dcb8787ff54e65e. It never made it to a public mailing list and still needs some work based on the review comments. So revert it for now. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/CAMuHMdXA9-ajoAza2JAW5879ECieMm1dbBbKHgJhDa7=3kWu3w@mail.gmail.com Cc: Jason Li <jason.li@cortina-access.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18s390/hvc_iucv: Remove power management supportJulian Wiedmann1-51/+0
Power management support was removed for s390 with commit 394216275c7d ("s390: remove broken hibernate / power management support"). Remove the hvc_iucv_driver, but keep the device struct around so that it can continue to provide the hvc_iucv_dev_attr_groups attributes. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18tty: serial: Add UART driver for Cortina-Access platformJason Li3-0/+818
This driver supports Cortina Access UART IP integrated in most all CAXXXX line of SoCs. Earlycom is also supported Signed-off-by: Jason Li <jason.li@cortina-access.com> Link: https://lore.kernel.org/r/20210615165750.31261-1-alex.nemirovsky@cortina-access.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: introduce mxser_16550A_or_MUST helperJiri Slaby1-13/+13
This check is used in the code on many places. Either in positive or negative form. So introduce a helper called mxser_16550A_or_MUST for this purpose. And replace all the occurrences. This simplifies many ifs in there. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-67-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: rename flags to old_speed in mxser_set_serial_infoJiri Slaby1-3/+3
Local 'flags' are used to store speed in mxser_set_serial_info, not actual flags (by doing & ASYNC_SPD_MASK). So rename 'flags' to 'old_speed' (after what it is). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-66-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: use port variable in mxser_set_serial_infoJiri Slaby1-5/+5
mxser_set_serial_info already defined a local 'port' of type struct tty_port. So use it in the code everywhere. This eliminates some text from the code there. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-65-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: access info->MCR under info->slockJiri Slaby1-2/+2
info->MCR is protected by info->slock all over the code. Extend the lock in mxser_tiocmget around the info->MCR fetch too. It likely doesn't change anything, but it's always good to be consistent. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-64-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: fix typos around enhanced modeJiri Slaby1-9/+9
Fix spelling of "enhanced" in macros and comments around them. While "enchance" comes from the original Moxa's driver, I don't think it was meant to be that. From the context, they obviously mean "enhanced". Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-63-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: decrypt FCR valuesJiri Slaby1-2/+6
Currently, some of the values written to FCR are magic constants. But they are composed of well-defined bits. Use these named macros in place of the constants. No changes in objdump -d. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-62-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: remove xmit_cnt < 0 testsJiri Slaby1-4/+4
mxser_port::xmit_cnt is unsigned, it cannot be negative. Therefore remove all the xmit_cnt < 0 tests. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-61-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: introduce and use start/stop_tx helpersJiri Slaby1-43/+37
Starting and stopping TX is performed on many places in the driver. It is repeated outb and info->IER modification. Create few helpers (__mxser_start_tx, mxser_start_tx, __mxser_stop_tx) and use them in the code instead of open coding. This should be a base for an uart driver for this device in the future. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-60-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: extract and dedup CTS handlingJiri Slaby1-54/+33
CTS is handled on two locations in mxser. Extract the code into separation function mxser_handle_cts. And call it from the two locations. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-59-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: don't start TX from tty_operations::put_charJiri Slaby1-11/+1
TX is not supposed to be started from tty_operations::put_char. Line disciplines ought to call tty_operations::put_char several times and then do a single tty_operations::flush_chars to start TX. Fix this in mxser by removing TX startup from mxser_put_char. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-58-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: cleanup mxser_dtr_rtsJiri Slaby1-4/+5
mxser_dtr_rts now does all inb, outb, & or | in a single statement. The code is hard to follow, so make it more readable by doing one-line = one-statement. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-57-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: cleanup mxser_rs_breakJiri Slaby1-4/+6
mxser_rs_break now does all inb, outb, & or | in a single statement. The code is hard to follow, so make it more readable by doing one-line = one-statement. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-56-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: remove pointless ioaddr checksJiri Slaby1-10/+1
struct mxser_port::ioaddr can never be NULL once set in ->probe. Hence the checks for it are pointless. Remove them. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-55-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: alloc only needed # of portsJiri Slaby1-2/+3
Many boards have only 2 ports. But we always allocate 8 ports (struct mxser_port) in each struct mxser_board. Switch this to an empty/variable sized array ([]) and allocate the needed number of ports using struct_size helper in ->probe. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-54-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: alloc struct mxser_board dynamicallyJiri Slaby1-10/+11
There is no need to preallocate an array of four struct mxser_board's. In most cases a single board or two will be present in a machine. So allocate struct mxser_board as needed in ->probe. This makes mxser_boards a bit array. There we store which indexes are free (unallocated). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-53-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: make mxser_board::idx really an indexJiri Slaby1-6/+7
mxser_board::idx is named as index, but actually contain a base. So assign index there. And for base, introduce a local variable. This is needed for the next patch (use index as a bit index). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-52-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: rework and simplify mxser_openJiri Slaby1-7/+4
In mxser_open, tty->port is already set thanks to tty_port_register_device in ->probe. So we can simply use container_of to deduce the struct mxser_port's pointer. Thus avoiding divisions and complex computations. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-51-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: cleanup mxser_process_txrx_fifoJiri Slaby1-13/+15
Rename process_txrx_fifo to mxser_process_txrx_fifo and: * remove useless parentheses * return from the 'if's true branch and process the rest in normal code flow (shift the code one level left) All this to make the code more readable. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-50-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: remove mxser_cardinfoJiri Slaby1-72/+41
Now that mxser_cards array (of struct mxser_cardinfo) contains only port count and a quirk, we can encode these two directly into pci_device_id::driver_data. And we can remove this struct completely. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-49-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: remove info message from probeJiri Slaby1-30/+26
There is a dev_info in ->probe which prints device's name, bus and slot numbers. All these can be fetched from the lspci output. So remove this useless print. This eliminates the whole mxser_cardinfo::name field. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-48-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: move request irq to probe and switch to managedJiri Slaby1-21/+9
Move request_irq from mxser_initbrd to mxser_probe so that we can switch it to managed request. It simplifies the cleanup code. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-47-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: pci, switch to managed resourcesJiri Slaby1-11/+3
Switch to managed resources for PCI using pcim_enable_device. Regions and device disabling is now taken care of by the core and we need not unwind. Neither in ->probe, nor in ->remove. That simplifies the code. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-46-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: inline mxser_board_remove into mxser_removeJiri Slaby1-12/+7
The only user of mxser_board_remove is mxser_remove. Move there those few lines. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-45-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: move board init into mxser_initbrdJiri Slaby1-25/+28
What's done in ->probe for board is actually its initialization. So move it to mxser_initbrd where it belongs. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-44-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: clean up the rest of MUST helpersJiri Slaby1-85/+12
Clean up the rest of MUST helpers. They all can use the newly added mxser_must_set_EFR. And passing a bool instead of having two functions (_enable+_disable) simplifies the code a lot too. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-43-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: introduce mxser_must_select_bank and use itJiri Slaby1-58/+16
Again, selecting a bank in the EFR register is duplicated many times. Extract it to a separate function (mxser_must_select_bank) and use it on all the places. This cleans up most of the helpers. And mxser_get_must_hardware_id now returns the HW ID directly, not via a by-reference parameter. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-42-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: dedup mxser_must_set_enhance_modeJiri Slaby1-20/+22
There are multiple copies of setting the EFR register. Separate it to a new universal function called __mxser_must_set_EFR. And use it in the code by introducing mxser_must_set_enhance_mode instead of mxser_disable_must_enchance_mode and mxser_enable_must_enchance_mode. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-41-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: simplify mxser_ioctl_op_modeJiri Slaby1-17/+10
* ModeMask local array is just inverted OP_MODE_MASK shifted by shiftbit. Drop this array and use the value directly. * return from the if's true branch and drop 'else' branch by moving the code completely outside the if. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-40-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: extract mxser_ioctl_op_modeJiri Slaby1-38/+45
This ioctl code sets RS232, RS422 or RS485 mode. Move the code to a separate function (mxser_ioctl_op_mode) with a note that these mxser-special ioctls should be likely replaced eventually by TIOCGRS485 and TIOCSRS485. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-39-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: cleanup mxser_change_speedJiri Slaby1-8/+7
* use UART macros instead of magic constants * let the default case reuse already existing code (CS5 case) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-38-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: drop mxser_port::custom_divisorJiri Slaby1-5/+3
It's an once-set constant, so define a macro for the constant (MXSER_CUSTOM_DIVISOR) and use it in the code instead. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-37-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: drop mxser_port::baud_baseJiri Slaby1-14/+11
It's an once-set constant, so define a macro for the constant (MXSER_BAUD_BASE) and use it in the code instead. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-36-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: remove unused mxser_port::stop_rxJiri Slaby1-2/+0
It's been a long time since mxser_port::stop_rx was abandoned. Remove it. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-35-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: drop unused mxser_port::normal_termiosJiri Slaby1-3/+0
After the previous patches, mxser_port::normal_termios is unused, so time to wave bye-bye. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-34-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-08 18:14:26 +0300