summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2017-03-02sched/headers: Prepare to move the get_task_struct()/put_task_struct() and ↵Ingo Molnar1-0/+1
related APIs from <linux/sched.h> to <linux/sched/task.h> But first update usage sites with the new header dependency. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2-1/+2
<linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar3-0/+5
<linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar5-4/+5
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar6-6/+6
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<uapi/linux/sched/types.h> We are going to move scheduler ABI details to <uapi/linux/sched/types.h>, which will be used from a number of .c files. Create empty placeholder header that maps to <linux/types.h>. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-28lib/vsprintf.c: remove %Z supportAlexey Dobriyan1-1/+1
Now that %z is standartised in C99 there is no reason to support %Z. Unlike %L it doesn't even make format strings smaller. Use BUILD_BUG_ON in a couple ATM drivers. In case anyone didn't notice lib/vsprintf.o is about half of SLUB which is in my opinion is quite an achievement. Hopefully this patch inspires someone else to trim vsprintf.c more. Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-28scripts/spelling.txt: add "comsume(r)" pattern and fix typo instancesMasahiro Yamada1-1/+1
Fix typos and add the following to the scripts/spelling.txt: comsume||consume comsumer||consumer comsuming||consuming I see some variable names with this pattern, but this commit is only touching comment blocks to avoid unexpected impact. Link: http://lkml.kernel.org/r/1481573103-11329-19-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23sparc64: Send break twice from console to return to boot promVijay Kumar1-1/+5
Now we can also jump to boot prom from sunhv console by sending break twice on console for both running and panicked kernel cases. Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-23sparc64: Migrate hvcons irq to panicked cpuVijay Kumar1-0/+6
On panic, all other CPUs are stopped except the one which had hit panic. To keep console alive, we need to migrate hvcons irq to panicked CPU. Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-23lib/show_mem.c: teach show_mem to work with the given nodemaskMichal Hocko2-2/+2
show_mem() allows to filter out node specific data which is irrelevant to the allocation request via SHOW_MEM_FILTER_NODES. The filtering is done in skip_free_areas_node which skips all nodes which are not in the mems_allowed of the current process. This works most of the time as expected because the nodemask shouldn't be outside of the allocating task but there are some exceptions. E.g. memory hotplug might want to request allocations from outside of the allowed nodes (see new_node_page). Get rid of this hardcoded behavior and push the allocation mask down the show_mem path and use it instead of cpuset_current_mems_allowed. NULL nodemask is interpreted as cpuset_current_mems_allowed. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170117091543.25850-5-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22Merge tag 'tty-4.11-rc1' of ↵Linus Torvalds67-1272/+2408
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big tty/serial driver patchset for 4.11-rc1. Not much here, but a lot of little fixes and individual serial driver updates all over the subsystem. Majority are for the sh-sci driver and platform (the arch-specific changes have acks from the maintainer). The start of the "serial bus" code is here as well, but nothing is converted to use it yet. That work is still ongoing, hopefully will start to show up across different subsystems for 4.12 (bluetooth is one major place that will be used.) All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (109 commits) tty: pl011: Work around QDF2400 E44 stuck BUSY bit atmel_serial: Use the fractional divider when possible tty: Remove extra include in HVC console tty framework serial: exar: Enable MSI support serial: exar: Move register defines from uapi header to consumer site serial: pci: Remove unused pci_boards entries serial: exar: Move Commtech adapters to 8250_exar as well serial: exar: Fix feature control register constants serial: exar: Fix initialization of EXAR registers for ports > 0 serial: exar: Fix mapping of port I/O resources serial: sh-sci: fix hardware RX trigger level setting tty/serial: atmel: ensure state is restored after suspending serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt serdev: ttyport: check whether tty_init_dev() fails serial: 8250_pci: make pciserial_detach_ports() static ARM: dts: STiH410-b2260: Enable HW flow-control ARM: dts: STiH407-family: Use new Pinctrl groups ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control ARM: dts: STiH410-b2260: Identify the UART RTS line dt-bindings: serial: Update 'uart-has-rtscts' description ...
2017-02-21Merge branch 'locking-core-for-linus' of ↵Linus Torvalds1-10/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle were: - Implement wraparound-safe refcount_t and kref_t types based on generic atomic primitives (Peter Zijlstra) - Improve and fix the ww_mutex code (Nicolai Hähnle) - Add self-tests to the ww_mutex code (Chris Wilson) - Optimize percpu-rwsems with the 'rcuwait' mechanism (Davidlohr Bueso) - Micro-optimize the current-task logic all around the core kernel (Davidlohr Bueso) - Tidy up after recent optimizations: remove stale code and APIs, clean up the code (Waiman Long) - ... plus misc fixes, updates and cleanups" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) fork: Fix task_struct alignment locking/spinlock/debug: Remove spinlock lockup detection code lockdep: Fix incorrect condition to print bug msgs for MAX_LOCKDEP_CHAIN_HLOCKS lkdtm: Convert to refcount_t testing kref: Implement 'struct kref' using refcount_t refcount_t: Introduce a special purpose refcount type sched/wake_q: Clarify queue reinit comment sched/wait, rcuwait: Fix typo in comment locking/mutex: Fix lockdep_assert_held() fail locking/rtmutex: Flip unlikely() branch to likely() in __rt_mutex_slowlock() locking/rwsem: Reinit wake_q after use locking/rwsem: Remove unnecessary atomic_long_t casts jump_labels: Move header guard #endif down where it belongs locking/atomic, kref: Implement kref_put_lock() locking/ww_mutex: Turn off __must_check for now locking/atomic, kref: Avoid more abuse locking/atomic, kref: Use kref_get_unless_zero() more locking/atomic, kref: Kill kref_sub() locking/atomic, kref: Add kref_read() locking/atomic, kref: Add KREF_INIT() ...
2017-02-16tty: pl011: Work around QDF2400 E44 stuck BUSY bitChristopher Covington1-7/+59
The Qualcomm Datacenter Technologies QDF2400 family of SoCs contains a custom (non-PrimeCell) implementation of the SBSA UART. Occasionally the BUSY bit in the Flag Register gets stuck as 1, erratum 44 for both 2432v1 and 2400v1 SoCs.Checking that the Transmit FIFO Empty (TXFE) bit is 0, instead of checking that the BUSY bit is 1, works around the issue. To facilitate this substitution of flags and values, introduce vendor-specific inversion of Feature Register bits when UART AMBA Port (UAP) data is available. For the earlycon case, prior to UAP availability, implement alternative putc and early_write functions. Similar to what how ARMv8 ACPI PCI quirks are detected during MCFG parsing, check the OEM fields of the Serial Port Console Redirection (SPCR) ACPI table to determine if the current platform is known to be affected by the erratum. Signed-off-by: Christopher Covington <cov@codeaurora.org> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Timur Tabi <timur@codeaurora.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14atmel_serial: Use the fractional divider when possibleRomain Izard1-3/+4
The fractional baud rate generator is available when using the asynchronous mode of Atmel USART controllers. It makes it possible to use higher baudrates, in exchange for a less precise clock with a variable duty cycle. The existing code restricts its use to the normal mode of the USART controller, following the recommendation from the datasheet for the first chip embedding this type of controller. This recommendation has been removed from the documentation for the newer chips. After verification, all revisions of this controller should be able to use the fractional baud rate generator with the different asynchronous modes. Removing the condition on ATMEL_US_USMODE makes it possible to get correct baudrates at high speed in more cases. This was tested with a board using an Atmel SAMA5D2 chip and a TI WL1831 WiFi/Bluetooth combo chip at 3 Mbauds, with hardware flow control enabled. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10tty: Remove extra include in HVC console tty frameworkSergio Valverde1-1/+0
An extra "init.h" include is found in the HVC console code. As such, the extra line is deleted. Signed-off-by: Sergio Valverde <vlvrdv@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: exar: Enable MSI supportJan Kiszka1-1/+7
Use pci_alloc_irq_vectors to enable MSI when available. At least the XR17V352 supports this. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: exar: Move register defines from uapi header to consumer siteJan Kiszka2-0/+19
None of these registers is relevant for the userspace API. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: pci: Remove unused pci_boards entriesJan Kiszka1-22/+0
Became obsolete with the split-out of 8250_exar. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: exar: Move Commtech adapters to 8250_exar as wellJan Kiszka2-143/+79
Those are Exar-based, too. With the required refactoring of the code to fit into 8250_exar, we automatically fix the same issue pci_xr17v35x_setup had before: 8XMODE, FCTL, TXTRG and RXTRG were always only set for port 0. Now they are initialized for the correct target port by using port.membase. Now we can also cleanly fix the blacklist of 8250_pci so that all Commtech devices are rejected and 8250_exar can handle them. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: exar: Fix initialization of EXAR registers for ports > 0Jan Kiszka1-13/+9
So far, pci_xr17v35x_setup always initialized 8XMODE, FCTR & Co. for port 0 because it used the address of that port instead of moving the pointer according to the port number. Fix this and remove the unneeded temporary ioremap by moving default_setup up and reusing the membase it fills into the port structure. Fixes: 14faa8cce88e ("tty/8250 Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: exar: Fix mapping of port I/O resourcesJan Kiszka1-0/+3
pcim_iomap_table only returns the table of mapping, it does not perform them. For that, we need to call pcim_iomap, but only if that mapping was not done before. Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: sh-sci: fix hardware RX trigger level settingUlrich Hecht1-2/+9
1. Do not set the RX trigger level for software timeout devices on reset; there is no timeout by default, and data will rot. 2. Do set the RX trigger level for hardware timeout devices when set via sysfs attribute. Fixes SCIFA-type serial consoles. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10tty/serial: atmel: ensure state is restored after suspendingAlexandre Belloni1-0/+44
When going to suspend, the UART registers may be lost because the power to VDDcore is cut. This is not an issue in the normal case but when no_console_suspend is used, we need to restore the registers in order to get a functional console. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: 8250_dw: Avoid "too much work" from bogus rx timeout interruptDouglas Anderson1-0/+23
On a Rockchip rk3399-based board during suspend/resume testing, we found that we could get the console UART into a state where it would print this to the console a lot: serial8250: too much work for irq42 Followed eventually by: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 11s! Upon debugging I found that we're in this state: iir = 0x000000cc lsr = 0x00000060 It appears that somehow we have a RX Timeout interrupt but there is no actual data present to receive. When we're in this state the UART driver claims that it handled the interrupt but it actually doesn't really do anything. This means that we keep getting the interrupt over and over again. Normally we don't actually need to do anything special to handle a RX Timeout interrupt. We'll notice that there is some data ready and we'll read it, which will end up clearing the RX Timeout. In this case we have a problem specifically because we got the RX TImeout without any data. Reading a bogus byte is confirmed to get us out of this state. It's unclear how exactly the UART got into this state, but it is known that the UART lines are essentially undriven and unpowered during suspend, so possibly during resume some garbage / half transmitted bits are seen on the line and put the UART into this state. The UART on the rk3399 is a DesignWare based 8250 UART. From mailing list posts, it appears that other people have run into similar problems with DesignWare based IP. Presumably this problem is unique to that IP, so I have placed the workaround there to avoid possibly of accidentally triggering bad behavior on other IP. Also note the RX Timeout behaves very differently in the DMA case, for for now the workaround is only applied to the non-DMA case. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-09serdev: ttyport: check whether tty_init_dev() failsDan Carpenter1-0/+2
My static checker complains that we don't have any error handling here. It's simple enough to add it. Fixes: bed35c6dfa6a ("serdev: add a tty port controller driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-09serial: 8250_pci: make pciserial_detach_ports() staticWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/tty/serial/8250/8250_pci.c:3916:6: warning: symbol 'pciserial_detach_ports' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-06serial: st-asc: Use generic DT binding for announcing RTS/CTS linesLee Jones1-1/+1
The initial binding 'st,hw-flow-control' isn't used anywhere, in neither in upstream nor downstream kernels. It isn't even documented in dt-bindings, so we can safely assume it's safe to swap to the generic one. Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-06serial: st-asc: (De)Register GPIOD and swap Pinctrl profilesLee Jones1-1/+26
When hardware flow-control is disabled, manual toggling of the UART's reset line (RTS) using userland applications (e.g. stty) is not possible, since the ASC IP does not provide this functionality in the same was as some other IPs do. Thus, we have to do this manually. This patch ensures that when HW flow-control is disabled the RTS/CTS lines are free to be registered via the GPIO API. It also ensures any registered GPIO lines are unregistered when HW flow-control is requested, allowing the IP to control them automatically. Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-06serial: st-asc: Read in all Pinctrl statesLee Jones1-0/+29
There are now 2 possible separate/different Pinctrl states which can be provided from platform data. One which encompasses the lines required for HW flow-control (CTS/RTS) and another which does not specify these lines, such that they can be used via GPIO mechanisms for manually toggling (i.e. from a request by `stty`). Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-06serial: st-asc: Provide RTS functionalityLee Jones1-4/+23
Until this point, it has not been possible for userland serial applications (e.g. stty) to toggle the UART RTS line. This can be useful with certain configurations. For example, when using a Mezzanine on a Linaro 96board, RTS line is used to take the on-board microcontroller in and out of reset. Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-06serial: st-asc: Ignore the parity error bit if 8-bit mode is enabledLee Jones1-3/+13
The datasheet states: "If the MODE field selects an 8-bit frame then this [parity error] bit is undefined. Software should ignore this bit when reading 8-bit frames." Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-06serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cardsIan Abbott1-0/+13
The MKS Instruments SCOM-0800 and SCOM-0801 cards (originally by Tenta Technologies) are 3U CompactPCI serial cards with 4 and 8 serial ports, respectively. The first 4 ports are implemented by an OX16PCI954 chip, and the second 4 ports are implemented by an OX16C954 chip on a local bus, bridged by the second PCI function of the OX16PCI954. The ports are jumper-selectable as RS-232 and RS-422/485, and the UARTs use a non-standard oscillator frequency of 20 MHz (base_baud = 1250000). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-06serial: sh-sci: make RX FIFO parameters tunable via sysfsUlrich Hecht1-0/+87
Allows tuning of the RX FIFO fill threshold and timeout. (The latter is only applicable to SCIFA and SCIFB). Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-06serial: sh-sci: SCIFA/B RX FIFO software timeoutUlrich Hecht1-33/+68
Implements support for FIFO fill thresholds greater than one with software timeout. This mechanism is not possible (or at least not useful) on SCIF family hardware other than SCIFA and SCIFB because they do not support turning off the DR hardware timeout interrupt separately from the RI interrupt. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-06serial: sh-sci: increase RX FIFO trigger defaults for (H)SCIFUlrich Hecht1-1/+28
Sets reasonable trigger defaults for the various SCIF variants. Also corrects the FIFO size for SH7705-style ports. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03tty_port: register tty ports with serdev busRob Herring1-0/+12
Register a serdev controller with the serdev bus when a tty_port is registered. This creates the serdev controller and create's serdev devices for any DT child nodes of the tty_port's parent (i.e. the UART device). Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-By: Sebastian Reichel <sre@kernel.org> Tested-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03serdev: add a tty port controller driverRob Herring3-0/+234
Add a serdev controller driver for tty ports. The controller is registered with serdev when tty ports are registered with the TTY core. As the TTY core is built-in only, this has the side effect of making serdev built-in as well. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-By: Sebastian Reichel <sre@kernel.org> Tested-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03serdev: Introduce new bus for serial attached devicesRob Herring4-0/+433
The serdev bus is designed for devices such as Bluetooth, WiFi, GPS and NFC connected to UARTs on host processors. Tradionally these have been handled with tty line disciplines, rfkill, and userspace glue such as hciattach. This approach has many drawbacks since it doesn't fit into the Linux driver model. Handling of sideband signals, power control and firmware loading are the main issues. This creates a serdev bus with controllers (i.e. host serial ports) and attached devices. Typically, these are point to point connections, but some devices have muxing protocols or a h/w mux is conceivable. Any muxing is not yet supported with the serdev bus. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-By: Sebastian Reichel <sre@kernel.org> Tested-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03tty_port: Add port client functionsRob Herring2-20/+43
Introduce a client (upward direction) operations struct for tty_port clients. Initially supported operations are for receiving data and write wake-up. This will allow for having clients other than an ldisc. Convert the calls to the ldisc to use the client ops as the default operations. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-By: Sebastian Reichel <sre@kernel.org> Tested-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03serial: sh-sci: implement FIFO threshold register settingUlrich Hecht1-0/+59
Sets the closest match for a desired RX trigger level. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03serial: sh-sci: consider DR (data ready) bit adequatelyUlrich Hecht1-1/+1
To allow operation with a higher RX FIFO interrupt threshold in PIO mode, it is necessary to consider the DR bit ("FIFO not full, but no data received for 1.5 frames") as an indicator that data can be read. Otherwise the driver will let data rot in the FIFO until the threshold is reached. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03serial: sh-sci: add FIFO trigger bitsUlrich Hecht2-0/+8
Defines the bits controlling FIFO thresholds, adds the additional HSCIF registers to the register map. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03tty: serial: cpm_uart: make use of for_each_node_by_type()Dmitry Torokhov1-8/+10
Instead of open-coding loop with of_find_node_by_type(), let's use canned macro. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03tty: serial: pl011: add ttyAMA for matching pl011 consoleSudeep Holla1-1/+1
Commit c7cef0a84912 ("console: Add extensible console matching") added match() method to struct console which allows the console to perform console command line matching instead of (or in addition to) default console matching (ie., by fixed name and index). Commit ad1696f6f09d ("ACPI: parse SPCR and enable matching console") introduced support for SPCR as matching console. Commit 10879ae5f12e ("serial: pl011: add console matching function") added the match method for pl011 console which checks for the console string to be "pl011" Now on a platform which has both SPCR in the ACPI tables and ttyAMA in the command line, the ttyAMA is chosen as "selected console" but it doesn't pass the matching console method which results in CON_CONSDEV not being set on the "selected console". As a result of that, the bootconsole(SPCR in the above case) is not unregistered and all the beginning boot messages are seen twice. This patch adds "ttyAMA" so that it's considered to match pl011 console. Fixes: 10879ae5f12e ("serial: pl011: add console matching function") Cc: Russell King <linux@armlinux.org.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Aleksey Makarov <aleksey.makarov@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03serial: samsung: enable clock before accessing interrupt mask resister남영민1-0/+3
Ensure that the uart clock is enabled prior to writing to the interrupt mask register in s3c24xx_serial_resume_noirq function. Without enabing the uart clock, the uart register cannot be accessed. Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03serial: 8250_pci: remove exar codeSudip Mukherjee2-333/+4
Remove the Exar specific codes from 8250_pci and blacklist those chips so that the new Exar serial driver binds to the devices. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03serial: exar: split out the exar code from 8250_pciSudip Mukherjee3-0/+401
Add the serial driver for the Exar chips. And also register the platform device for the GPIO provided by the Exar chips. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31serial: imx: Fix the CTS_B polarity in RS485 modeFabio Estevam1-3/+3
When userspace passes the SER_RS485_RTS_ON_SEND flag it means that the CTS_B pin should go to logic level high before the transmission begins. CTS_B goes to logic level high when both CTSC and CTS bits are cleared. When userspace passes the SER_RS485_RTS_AFTER_SEND flag it means that the CTS_B pin should go to logic level low after the transmission finishes. CTS_B goes to logic level low when CTSC bit is cleared and CTS bit is set. So fix the CTS_B polarity logic. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31serial: imx: Fix the RTS GPIO polarity in RS485 modeFabio Estevam1-10/+10
On a board that needs to drive RTS GPIO high in order to enable the transmission of a RS485 transceiver the following description is passed in the devide tree: &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; rts-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; status = "okay"; }; and userspace configures the uart port as follows: /* enable RS485 mode: */ rs485conf.flags |= SER_RS485_ENABLED; /* set logical level for RTS pin equal to 1 when sending: */ rs485conf.flags |= SER_RS485_RTS_ON_SEND; /* set logical level for RTS pin equal to 0 after sending: */ rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND); However the RTS GPIO polarity observed in the oscilloscope is inverted. When the SER_RS485_RTS_ON_SEND flag is set the imx_port_rts_active() function should be called and following the same logic when SER_RS485_RTS_AFTER_SEND flag is cleared the imx_port_rts_inactive() should be called. Do such logic change so that RS485 communication in half duplex can work successfully when the RTS GPIO pin is passed via device tree. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-14 06:08:23 +0300