summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2023-08-03tty: n_gsm: fix UAF in gsm_cleanup_muxChaoyuan Peng1-1/+3
commit 9b9c8195f3f0d74a826077fc1c01b9ee74907239 upstream. In gsm_cleanup_mux() the 'gsm->dlci' pointer was not cleaned properly, leaving it a dangling pointer after gsm_dlci_release. This leads to use-after-free where 'gsm->dlci[0]' are freed and accessed by the subsequent gsm_cleanup_mux(). Such is the case in the following call trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e3/0x2cb lib/dump_stack.c:106 print_address_description+0x63/0x3b0 mm/kasan/report.c:248 __kasan_report mm/kasan/report.c:434 [inline] kasan_report+0x16b/0x1c0 mm/kasan/report.c:451 gsm_cleanup_mux+0x76a/0x850 drivers/tty/n_gsm.c:2397 gsm_config drivers/tty/n_gsm.c:2653 [inline] gsmld_ioctl+0xaae/0x15b0 drivers/tty/n_gsm.c:2986 tty_ioctl+0x8ff/0xc50 drivers/tty/tty_io.c:2816 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x61/0xcb </TASK> Allocated by task 3501: kasan_save_stack mm/kasan/common.c:38 [inline] kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] ____kasan_kmalloc+0xba/0xf0 mm/kasan/common.c:513 kasan_kmalloc include/linux/kasan.h:264 [inline] kmem_cache_alloc_trace+0x143/0x290 mm/slub.c:3247 kmalloc include/linux/slab.h:591 [inline] kzalloc include/linux/slab.h:721 [inline] gsm_dlci_alloc+0x53/0x3a0 drivers/tty/n_gsm.c:1932 gsm_activate_mux+0x1c/0x330 drivers/tty/n_gsm.c:2438 gsm_config drivers/tty/n_gsm.c:2677 [inline] gsmld_ioctl+0xd46/0x15b0 drivers/tty/n_gsm.c:2986 tty_ioctl+0x8ff/0xc50 drivers/tty/tty_io.c:2816 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x61/0xcb Freed by task 3501: kasan_save_stack mm/kasan/common.c:38 [inline] kasan_set_track+0x4b/0x80 mm/kasan/common.c:46 kasan_set_free_info+0x1f/0x40 mm/kasan/generic.c:360 ____kasan_slab_free+0xd8/0x120 mm/kasan/common.c:366 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_hook mm/slub.c:1705 [inline] slab_free_freelist_hook+0xdd/0x160 mm/slub.c:1731 slab_free mm/slub.c:3499 [inline] kfree+0xf1/0x270 mm/slub.c:4559 dlci_put drivers/tty/n_gsm.c:1988 [inline] gsm_dlci_release drivers/tty/n_gsm.c:2021 [inline] gsm_cleanup_mux+0x574/0x850 drivers/tty/n_gsm.c:2415 gsm_config drivers/tty/n_gsm.c:2653 [inline] gsmld_ioctl+0xaae/0x15b0 drivers/tty/n_gsm.c:2986 tty_ioctl+0x8ff/0xc50 drivers/tty/tty_io.c:2816 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x61/0xcb Fixes: aa371e96f05d ("tty: n_gsm: fix restart handling via CLD command") Signed-off-by: Chaoyuan Peng <hedonistsmith@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03serial: sifive: Fix sifive_serial_console_setup() sectionSamuel Holland1-1/+1
commit 9b8fef6345d5487137d4193bb0a0eae2203c284e upstream. This function is called indirectly from the platform driver probe function. Even if the driver is built in, it may be probed after free_initmem() due to deferral or unbinding/binding via sysfs. Thus the function cannot be marked as __init. Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive UART") Cc: stable <stable@kernel.org> Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20230624060159.3401369-1-samuel.holland@sifive.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03serial: 8250_dw: Preserve original value of DLF registerRuihong Luo1-2/+4
commit 748c5ea8b8796ae8ee80b8d3a3d940570b588d59 upstream. Preserve the original value of the Divisor Latch Fraction (DLF) register. When the DLF register is modified without preservation, it can disrupt the baudrate settings established by firmware or bootloader, leading to data corruption and the generation of unreadable or distorted characters. Fixes: 701c5e73b296 ("serial: 8250_dw: add fractional divisor support") Cc: stable <stable@kernel.org> Signed-off-by: Ruihong Luo <colorsu1922@gmail.com> Link: https://lore.kernel.org/stable/20230713004235.35904-1-colorsu1922%40gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230713004235.35904-1-colorsu1922@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03serial: qcom-geni: drop bogus runtime pm state updateJohan Hovold1-7/+0
commit 4dd8752a14ca0303fbdf0a6c68ff65f0a50bd2fa upstream. The runtime PM state should not be changed by drivers that do not implement runtime PM even if it happens to work around a bug in PM core. With the wake irq arming now fixed, drop the bogus runtime PM state update which left the device in active state (and could potentially prevent a parent device from suspending). Fixes: f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup") Cc: 5.6+ <stable@vger.kernel.org> # 5.6+ Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03tty: fix hang on tty device with no_room setHui Li1-4/+21
[ Upstream commit 4903fde8047a28299d1fc79c1a0dcc255e928f12 ] It is possible to hang pty devices in this case, the reader was blocking at epoll on master side, the writer was sleeping at wait_woken inside n_tty_write on slave side, and the write buffer on tty_port was full, we found that the reader and writer would never be woken again and blocked forever. The problem was caused by a race between reader and kworker: n_tty_read(reader): n_tty_receive_buf_common(kworker): copy_from_read_buf()| |room = N_TTY_BUF_SIZE - (ldata->read_head - tail) |room <= 0 n_tty_kick_worker() | |ldata->no_room = true After writing to slave device, writer wakes up kworker to flush data on tty_port to reader, and the kworker finds that reader has no room to store data so room <= 0 is met. At this moment, reader consumes all the data on reader buffer and calls n_tty_kick_worker to check ldata->no_room which is false and reader quits reading. Then kworker sets ldata->no_room=true and quits too. If write buffer is not full, writer will wake kworker to flush data again after following writes, but if write buffer is full and writer goes to sleep, kworker will never be woken again and tty device is blocked. This problem can be solved with a check for read buffer size inside n_tty_receive_buf_common, if read buffer is empty and ldata->no_room is true, a call to n_tty_kick_worker is necessary to keep flushing data to reader. Cc: <stable@vger.kernel.org> Fixes: 42458f41d08f ("n_tty: Ensure reader restarts worker for next reader") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Hui Li <caelli@tencent.com> Message-ID: <1680749090-14106-1-git-send-email-caelli@tencent.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03n_tty: Rename tail to old_tail in n_tty_read()Ilpo Järvinen1-3/+3
[ Upstream commit 947d66b68f3c4e7cf8f3f3500807b9d2a0de28ce ] The local tail variable in n_tty_read() is used for one purpose, it keeps the old tail. Thus, rename it appropriately to improve code readability. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/22b37499-ff9a-7fc1-f6e0-58411328d122@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 4903fde8047a ("tty: fix hang on tty device with no_room set") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23Revert "8250: add support for ASIX devices with a FIFO bug"Jiaqing Zhao3-28/+3
commit a82d62f708545d22859584e0e0620da8e3759bbc upstream. This reverts commit eb26dfe8aa7eeb5a5aa0b7574550125f8aa4c3b3. Commit eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO bug") merged on Jul 13, 2012 adds a quirk for PCI_VENDOR_ID_ASIX (0x9710). But that ID is the same as PCI_VENDOR_ID_NETMOS defined in 1f8b061050c7 ("[PATCH] Netmos parallel/serial/combo support") merged on Mar 28, 2005. In pci_serial_quirks array, the NetMos entry always takes precedence over the ASIX entry even since it was initially merged, code in that commit is always unreachable. In my tests, adding the FIFO workaround to pci_netmos_init() makes no difference, and the vendor driver also does not have such workaround. Given that the code was never used for over a decade, it's safe to revert it. Also, the real PCI_VENDOR_ID_ASIX should be 0x125b, which is used on their newer AX99100 PCIe serial controllers released on 2016. The FIFO workaround should not be intended for these newer controllers, and it was never implemented in vendor driver. Fixes: eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO bug") Cc: stable <stable@kernel.org> Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230619155743.827859-1-jiaqing.zhao@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23tty: serial: imx: fix rs485 rx after txMartin Fuzzey1-5/+13
commit 639949a7031e04c59ec91614eceb9543e9120f43 upstream. Since commit 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high") RS485 reception no longer works after a transmission. The following scenario shows the problem: 1) Open a port in RS485 mode 2) Receive data from remote (OK) 3) Transmit data to remote (OK) 4) Receive data from remote (Nothing received) In RS485 mode, imx_uart_start_tx() calls imx_uart_stop_rx() and, when the transmission is complete, imx_uart_stop_tx() calls imx_uart_start_rx(). Since the above commit imx_uart_stop_rx() now sets the loopback bit but imx_uart_start_rx() does not clear it causing the hardware to remain in loopback mode and not receive external data. Fix this by moving the existing loopback disable code to a helper function and calling it from imx_uart_start_rx() too. Fixes: 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high") Cc: stable@vger.kernel.org Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230616104838.2729694-1-martin.fuzzey@flowbird.group Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when ↵Christophe JAILLET1-0/+8
iterating clk commit 832e231cff476102e8204a9e7bddfe5c6154a375 upstream. When the best clk is searched, we iterate over all possible clk. If we find a better match, the previous one, if any, needs to be freed. If a better match has already been found, we still need to free the new one, otherwise it leaks. Cc: <stable@vger.kernel.org> # v3.3+ Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Fixes: 5f5a7a5578c5 ("serial: samsung: switch to clkdev based clock lookup") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Message-ID: <cf3e0053d2fc7391b2d906a86cd01a5ef15fb9dc.1686412569.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in ↵Christophe JAILLET1-1/+5
case of error commit a9c09546e903f1068acfa38e1ee18bded7114b37 upstream. If clk_get_rate() fails, the clk that has just been allocated needs to be freed. Cc: <stable@vger.kernel.org> # v3.3+ Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Fixes: 5f5a7a5578c5 ("serial: samsung: switch to clkdev based clock lookup") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Message-ID: <e4baf6039368f52e5a5453982ddcb9a330fc689e.1686412569.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23serial: atmel: don't enable IRQs prematurelyDan Carpenter1-2/+2
commit 27a826837ec9a3e94cc44bd9328b8289b0fcecd7 upstream. The atmel_complete_tx_dma() function disables IRQs at the start of the function by calling spin_lock_irqsave(&port->lock, flags); There is no need to disable them a second time using the spin_lock_irq() function and, in fact, doing so is a bug because it will enable IRQs prematurely when we call spin_unlock_irq(). Just use spin_lock/unlock() instead without disabling or enabling IRQs. Fixes: 08f738be88bb ("serial: at91: add tx dma support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Richard Genoud <richard.genoud@gmail.com> Link: https://lore.kernel.org/r/cb7c39a9-c004-4673-92e1-be4e34b85368@moroto.mountain Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-19tty: serial: fsl_lpuart: add earlycon for imx8ulp platformSherry Sun1-0/+1
commit e0edfdc15863ec80a1d9ac6e174dbccc00206dd0 upstream. Add earlycon support for imx8ulp platform. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230619080613.16522-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-19serial: 8250_omap: Use force_suspend and resume for system suspendTony Lindgren1-5/+15
[ Upstream commit 20a41a62618df85f3a2981008edec5cadd785e0a ] We should not rely on autosuspend timeout for system suspend. Instead, let's use force_suspend and force_resume functions. Otherwise the serial port controller device may not be idled on suspend. As we are doing a register write on suspend to configure the serial port, we still need to runtime PM resume the port on suspend. While at it, let's switch to pm_runtime_resume_and_get() and check for errors returned. And let's add the missing line break before return to the suspend function while at it. Fixes: 09d8b2bdbc5c ("serial: 8250: omap: Provide ability to enable/disable UART as wakeup source") Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Dhruva Gole <d-gole@ti.com> Message-ID: <20230614045922.4798-1-tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19serial: 8250: lock port for UART_IER access in omap8250_irq()John Ogness1-2/+3
[ Upstream commit 25614735a647693c1260f253dc3ab32127697806 ] omap8250_irq() accesses UART_IER. This register is modified twice by each console write (serial8250_console_write()) under the port lock. omap8250_irq() must also take the port lock to guanentee synchronized access to UART_IER. Since the port lock is already being taken for the stop_rx() callback and since it is safe to call cancel_delayed_work() while holding the port lock, simply extend the port lock region to include UART_IER access. Fixes: 1fe0e1fa3209 ("serial: 8250_omap: Handle optional overrun-throttle-ms property") Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230525093159.223817-8-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19serial: core: lock port for start_rx() in uart_resume_port()John Ogness1-1/+4
[ Upstream commit 51e45fba14bf08b66bca764a083c7f2e2ff62f01 ] The only user of the start_rx() callback (qcom_geni) directly calls its own stop_rx() callback. Since stop_rx() requires that the port->lock is taken and interrupts are disabled, the start_rx() callback has the same requirement. Fixes: cfab87c2c271 ("serial: core: Introduce callback for start_rx and do stop_rx in suspend only if this callback implementation is present.") Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230525093159.223817-5-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19serial: 8250: lock port for stop_rx() in omap8250_irq()John Ogness1-0/+2
[ Upstream commit ca73a892c5bec4b08a2fa22b3015e98ed905abb7 ] The uarts_ops stop_rx() callback expects that the port->lock is taken and interrupts are disabled. Fixes: 1fe0e1fa3209 ("serial: 8250_omap: Handle optional overrun-throttle-ms property") Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230525093159.223817-4-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19serial: core: lock port for stop_rx() in uart_suspend_port()John Ogness1-1/+4
[ Upstream commit abcb0cf1f5b2d99b1d117a4dbce334120e358d6d ] The uarts_ops stop_rx() callback expects that the port->lock is taken and interrupts are disabled. Fixes: c9d2325cdb92 ("serial: core: Do stop_rx in suspend path for console if console_suspend is disabled") Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230525093159.223817-3-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19serial: 8250: omap: Fix freeing of resources on failed registerTony Lindgren1-0/+2
[ Upstream commit b9ab22c2bc8652324a803b3e2be69838920b4025 ] If serial8250_register_8250_port() fails, the SoC can hang as the deferred PMQoS work will still run as is not flushed and removed. Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230508082014.23083-2-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-28tty: serial: fsl_lpuart: reduce RX watermark to 0 on LS1028ARobert Hodaszi1-1/+1
[ Upstream commit a82c3df955f8c1c726e4976527aa6ae924a67dd9 ] LS1028A is using DMA with LPUART. Having RX watermark set to 1, means DMA transactions are started only after receiving the second character. On other platforms with newer LPUART IP, Receiver Idle Empty function initiates the DMA request after the receiver is idling for 4 characters. But this feature is missing on LS1028A, which is causing a 1-character delay in the RX direction on this platform. Set RX watermark to 0 to initiate RX DMA after each character. Link: https://lore.kernel.org/linux-serial/20230607103459.1222426-1-robert.hodaszi@digi.com/ Fixes: 9ad9df844754 ("tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case") Cc: stable <stable@kernel.org> Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com> Message-ID: <20230609121334.1878626-1-robert.hodaszi@digi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-28tty: serial: fsl_lpuart: make rx_watermark configurable for different platformsSherry Sun1-2/+12
[ Upstream commit 34ebb26f12a84b744f43c5c4869516f122a2dfaa ] Add rx_watermark parameter for struct lpuart_port to make the receive watermark configurable for different platforms. No function changed. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20230130064449.9564-2-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: a82c3df955f8 ("tty: serial: fsl_lpuart: reduce RX watermark to 0 on LS1028A") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21serial: lantiq: add missing interrupt ackBernhard Seibold1-0/+1
commit 306320034e8fbe7ee1cc4f5269c55658b4612048 upstream. Currently, the error interrupt is never acknowledged, so once active it will stay active indefinitely, causing the handler to be called in an infinite loop. Fixes: 2f0fc4159a6a ("SERIAL: Lantiq: Add driver for MIPS Lantiq SOCs.") Cc: <stable@vger.kernel.org> Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Message-ID: <20230602133029.546-1-mail@bernhard-seibold.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-09serial: cpm_uart: Fix a COMPILE_TEST dependencyHerve Codina2-3/+1
commit 7183c37fd53eee1e795206e625da12a5d7ec1e1a upstream. In a COMPILE_TEST configuration, the cpm_uart driver uses symbols from the cpm_uart_cpm2.c file. This file is compiled only when CONFIG_CPM2 is set. Without this dependency, the linker fails with some missing symbols for COMPILE_TEST configuration that needs SERIAL_CPM without enabling CPM2. This lead to: depends on CPM2 || CPM1 || (PPC32 && CPM2 && COMPILE_TEST) This dependency does not make sense anymore and can be simplified removing all the COMPILE_TEST part. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305160221.9XgweObz-lkp@intel.com/ Fixes: e3e7b13bffae ("serial: allow COMPILE_TEST for some drivers") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230523085902.75837-3-herve.codina@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-09serial: 8250_tegra: Fix an error handling path in tegra_uart_probe()Christophe JAILLET1-1/+3
commit 134f49dec0b6aca3259cd8259de4c572048bd207 upstream. If an error occurs after reset_control_deassert(), it must be re-asserted, as already done in the .remove() function. Fixes: c6825c6395b7 ("serial: 8250_tegra: Create Tegra specific 8250 driver") Cc: stable <stable@kernel.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/f8130f35339cc80edc6b9aac4bb2a60b60a226bf.1684063511.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-09tty: serial: fsl_lpuart: use UARTCTRL_TXINV to send break instead of ↵Sherry Sun1-21/+23
UARTCTRL_SBK commit 2474e05467c00f7d51af3039b664de6886325257 upstream. LPUART IP now has two known bugs, one is that CTS has higher priority than the break signal, which causes the break signal sending through UARTCTRL_SBK may impacted by the CTS input if the HW flow control is enabled. It exists on all platforms we support in this driver. So we add a workaround patch for this issue: commit c4c81db5cf8b ("tty: serial: fsl_lpuart: disable the CTS when send break signal"). Another IP bug is i.MX8QM LPUART may have an additional break character being sent after SBK was cleared. It may need to add some delay between clearing SBK and re-enabling CTS to ensure that the SBK latch are completely cleared. But we found that during the delay period before CTS is enabled, there is still a risk that Bluetooth data in TX FIFO may be sent out during this period because of break off and CTS disabled(even if BT sets CTS line deasserted, data is still sent to BT). Due to this risk, we have to drop the CTS-disabling workaround for SBK bugs, use TXINV seems to be a better way to replace SBK feature and avoid above risk. Also need to disable the transmitter to prevent any data from being sent out during break, then invert the TX line to send break. Then disable the TXINV when turn off break and re-enable transmitter. Fixes: c4c81db5cf8b ("tty: serial: fsl_lpuart: disable the CTS when send break signal") Cc: stable <stable@kernel.org> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20230519094751.28948-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAFGeorge Kennedy1-2/+9
commit 8fb9ea65c9d1338b0d2bb0a9122dc942cdd32357 upstream. After a call to console_unlock() in vcs_write() the vc_data struct can be freed by vc_port_destruct(). Because of that, the struct vc_data pointer must be reloaded in the while loop in vcs_write() after console_lock() to avoid a UAF when vcs_size() is called. Syzkaller reported a UAF in vcs_size(). BUG: KASAN: slab-use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215) Read of size 4 at addr ffff8880beab89a8 by task repro_vcs_size/4119 Call Trace: <TASK> __asan_report_load4_noabort (mm/kasan/report_generic.c:380) vcs_size (drivers/tty/vt/vc_screen.c:215) vcs_write (drivers/tty/vt/vc_screen.c:664) vfs_write (fs/read_write.c:582 fs/read_write.c:564) ... <TASK> Allocated by task 1213: kmalloc_trace (mm/slab_common.c:1064) vc_allocate (./include/linux/slab.h:559 ./include/linux/slab.h:680 drivers/tty/vt/vt.c:1078 drivers/tty/vt/vt.c:1058) con_install (drivers/tty/vt/vt.c:3334) tty_init_dev (drivers/tty/tty_io.c:1303 drivers/tty/tty_io.c:1415 drivers/tty/tty_io.c:1392) tty_open (drivers/tty/tty_io.c:2082 drivers/tty/tty_io.c:2128) chrdev_open (fs/char_dev.c:415) do_dentry_open (fs/open.c:921) vfs_open (fs/open.c:1052) ... Freed by task 4116: kfree (mm/slab_common.c:1016) vc_port_destruct (drivers/tty/vt/vt.c:1044) tty_port_destructor (drivers/tty/tty_port.c:296) tty_port_put (drivers/tty/tty_port.c:312) vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2)) vt_ioctl (drivers/tty/vt/vt_ioctl.c:903) tty_ioctl (drivers/tty/tty_io.c:2778) ... The buggy address belongs to the object at ffff8880beab8800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 424 bytes inside of freed 1024-byte region [ffff8880beab8800, ffff8880beab8c00) The buggy address belongs to the physical page: page:00000000afc77580 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbeab8 head:00000000afc77580 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 000fffffc0010200 ffff888100042dc0 ffffea000426de00 dead000000000002 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880beab8880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880beab8900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880beab8980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880beab8a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880beab8a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint Fixes: ac751efa6a0d ("console: rename acquire/release_console_sem() to console_lock/unlock()") Cc: stable <stable@kernel.org> Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/1683889728-10411-1-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24serial: qcom-geni: fix enabling deactivated interruptKrzysztof Kozlowski1-5/+4
commit 5f949f140f73696f64acb89a1f16ff9153d017e0 upstream. The driver have a race, experienced only with PREEMPT_RT patchset: CPU0 | CPU1 ================================================================== qcom_geni_serial_probe | uart_add_one_port | | serdev_drv_probe | qca_serdev_probe | serdev_device_open | uart_open | uart_startup | qcom_geni_serial_startup | enable_irq | __irq_startup | WARN_ON() | IRQ not activated request_threaded_irq | irq_domain_activate_irq | The warning: 894000.serial: ttyHS1 at MMIO 0x894000 (irq = 144, base_baud = 0) is a MSM serial serial0: tty port ttyHS1 registered WARNING: CPU: 7 PID: 107 at kernel/irq/chip.c:241 __irq_startup+0x78/0xd8 ... qcom_geni_serial 894000.serial: serial engine reports 0 RX bytes in! Adding UART port triggers probe of child serial devices - serdev and eventually Qualcomm Bluetooth hci_qca driver. This opens UART port which enables the interrupt before it got activated in request_threaded_irq(). The issue originates in commit f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup") and discussion on mailing list [1]. However the above commit does not explain why the uart_add_one_port() is moved above requesting interrupt. [1] https://lore.kernel.org/all/5d9f3dfa.1c69fb81.84c4b.30bf@mx.google.com/ Fixes: f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup") Cc: <stable@vger.kernel.org> Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20230505152301.2181270-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24serial: 8250_exar: Add support for USR298x PCI ModemsAndrew Davis1-0/+17
commit 95d698869b404772cc8b72560df71548491c10bc upstream. Possibly the last PCI controller-based (i.e. not a soft/winmodem) dial-up modem one can still buy. Looks to have a stock XR17C154 PCI UART chip for communication, but for some reason when provisioning the PCI IDs they swapped the vendor and subvendor IDs. Otherwise this card would have worked out of the box. Searching online, some folks seem to not have this issue and others do, so it is possible only some batches of cards have this error. Create a new macro to handle the switched IDs and add support here. Signed-off-by: Andrew Davis <afd@ti.com> Cc: stable <stable@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230420160209.28221-1-afd@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24serial: Add support for Advantech PCI-1611U cardVitaliy Tomin1-0/+5
commit d2b00516de0e1d696724247098f6733a6ea53908 upstream. Add support for Advantech PCI-1611U card Advantech provides opensource drivers for this and many others card based on legacy copy of 8250_pci driver called adv950 https://www.advantech.com/emt/support/details/driver?id=1-TDOIMJ It is hard to maintain to run as out of tree module on newer kernels. Just adding PCI ID to kernel 8250_pci works perfect. Signed-off-by: Vitaliy Tomin <tomin@iszf.irk.ru> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230423034512.2671157-1-tomin@iszf.irk.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24serial: 8250_bcm7271: fix leak in `brcmuart_probe`Doug Berger1-1/+1
[ Upstream commit f264f2f6f4788dc031cef60a0cf2881902736709 ] Smatch reports: drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn: 'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032. The issue is fixed by using a managed clock. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Reported-by: XuDong Liu <m202071377@hust.edu.cn> Link: https://lore.kernel.org/lkml/20230424125100.4783-1-m202071377@hust.edu.cn/ Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230427181916.2983697-3-opendmb@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24serial: 8250_bcm7271: balance clk_enable callsDoug Berger1-1/+4
[ Upstream commit 8a3b5477256a54ae4a470dcebbcf8cdc18e4696d ] The sw_baud clock must be disabled when the device driver is not connected to the device. This now occurs when probe fails and upon remove. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Reported-by: XuDong Liu <m202071377@hust.edu.cn> Link: https://lore.kernel.org/lkml/20230424125100.4783-1-m202071377@hust.edu.cn/ Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230427181916.2983697-2-opendmb@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24serial: arc_uart: fix of_iomap leak in `arc_serial_probe`Ke Zhang1-3/+4
[ Upstream commit 8ab5fc55d7f65d58a3c3aeadf11bdf60267cd2bd ] Smatch reports: drivers/tty/serial/arc_uart.c:631 arc_serial_probe() warn: 'port->membase' from of_iomap() not released on lines: 631. In arc_serial_probe(), if uart_add_one_port() fails, port->membase is not released, which would cause a resource leak. To fix this, I replace of_iomap with devm_platform_ioremap_resource. Fixes: 8dbe1d5e09a7 ("serial/arc: inline the probe helper") Signed-off-by: Ke Zhang <m202171830@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230428031636.44642-1-m202171830@hust.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24serial: 8250: Reinit port->pm on port specific driver unbindTony Lindgren1-0/+1
[ Upstream commit 04e82793f068d2f0ffe62fcea03d007a8cdc16a7 ] When we unbind a serial port hardware specific 8250 driver, the generic serial8250 driver takes over the port. After that we see an oops about 10 seconds later. This can produce the following at least on some TI SoCs: Unhandled fault: imprecise external abort (0x1406) Internal error: : 1406 [#1] SMP ARM Turns out that we may still have the serial port hardware specific driver port->pm in use, and serial8250_pm() tries to call it after the port specific driver is gone: serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base] uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base] uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c __tty_hangup.part.0 from disassociate_ctty+0x154/0x20c disassociate_ctty from do_exit+0x744/0xaac do_exit from do_group_exit+0x40/0x8c do_group_exit from __wake_up_parent+0x0/0x1c Let's fix the issue by calling serial8250_set_defaults() in serial8250_unregister_port(). This will set the port back to using the serial8250 default functions, and sets the port->pm to point to serial8250_pm. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230418101407.12403-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11serial: 8250: Add missing wakeup event reportingFlorian Fainelli1-0/+4
[ Upstream commit 0ba9e3a13c6adfa99e32b2576d20820ab10ad48a ] An 8250 UART configured as a wake-up source would not have reported itself through sysfs as being the source of wake-up, correct that. Fixes: b3b708fa2780 ("wake up from a serial port") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230414170241.2016255-1-f.fainelli@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11tty: serial: fsl_lpuart: adjust buffer length to the intended sizeShenwei Wang1-1/+1
[ Upstream commit f73fd750552524b06b5d77ebfdd106ccc8fcac61 ] Based on the fls function definition provided below, we should not subtract 1 to obtain the correct buffer length: fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20230410195555.1003900-1-shenwei.wang@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11serial: 8250_bcm7271: Fix arbitration handlingDoug Berger1-6/+12
[ Upstream commit 15ac1122fd6d4bf408a03e6f23c7ad4f60b22f9e ] The arbitration of the UART DMA is mishandled for a few exceptional cases when probing and releasing the driver. It is possible that the DMA register spaces are not defined in device tree for an instance of the driver, so attempts to access the registers in brcmuart_arbitration() would use NULL pointers. It is also possible for the probe function to return an error while still holding the UART DMA. This would prevent the UART DMA from being claimed by an instance that could use it. These errors are addressed by only releasing the UART DMA if it is held by this instance (i.e. priv->dma_enabled == 1) and directing early error paths in probe to this common release_dma handling. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230309190224.687380-1-opendmb@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11serial: stm32: Re-assert RTS/DE GPIO in RS485 mode only if more data are ↵Marek Vasut1-2/+3
transmitted [ Upstream commit c47527cbcc3c50800f34b8c684f29721f75de246 ] The stm32_usart_transmit_chars() may be called with empty or stopped transmit queue, and no XON/OFF character pending. This can happen at the end of transmission, where this last call is used to either handle the XON/XOFF x_char, or disable TX interrupt if queue is empty or stopped. If that occurs, do not assert the RS485 RTS/DE GPIO anymore, as the GPIO would remain asserted past the end of transmission and that would block the RS485 bus after the transmission. Only assert the RS485 RTS/DE GPIO if there is either pending XON/XOFF x_char, or at least one character in running transmit queue. Fixes: d7c76716169d ("serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode") Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20230223042252.95480-2-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11serial: max310x: fix IO data corruption in batched operationsJan Kundrát1-2/+15
commit 3f42b142ea1171967e40e10e4b0241c0d6d28d41 upstream. After upgrading from 5.16 to 6.1, our board with a MAX14830 started producing lots of garbage data over UART. Bisection pointed out commit 285e76fc049c as the culprit. That patch tried to replace hand-written code which I added in 2b4bac48c1084 ("serial: max310x: Use batched reads when reasonably safe") with the generic regmap infrastructure for batched operations. Unfortunately, the `regmap_raw_read` and `regmap_raw_write` which were used are actually functions which perform IO over *multiple* registers. That's not what is needed for accessing these Tx/Rx FIFOs; the appropriate functions are the `_noinc_` versions, not the `_raw_` ones. Fix this regression by using `regmap_noinc_read()` and `regmap_noinc_write()` along with the necessary `regmap_config` setup; with this patch in place, our board communicates happily again. Since our board uses SPI for talking to this chip, the I2C part is completely untested. Fixes: 285e76fc049c ("serial: max310x: use regmap methods for SPI batch operations") Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://lore.kernel.org/r/79db8e82aadb0e174bc82b9996423c3503c8fb37.1680732084.git.jan.kundrat@cesnet.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11serial: 8250: Fix serial8250_tx_empty() race with DMA TxIlpo Järvinen2-3/+16
commit 146a37e05d620cef4ad430e5d1c9c077fe6fa76f upstream. There's a potential race before THRE/TEMT deasserts when DMA Tx is starting up (or the next batch of continuous Tx is being submitted). This can lead to misdetecting Tx empty condition. It is entirely normal for THRE/TEMT to be set for some time after the DMA Tx had been setup in serial8250_tx_dma(). As Tx side is definitely not empty at that point, it seems incorrect for serial8250_tx_empty() claim Tx is empty. Fix the race by also checking in serial8250_tx_empty() whether there's DMA Tx active. Note: This fix only addresses in-kernel race mainly to make using TCSADRAIN/FLUSH robust. Userspace can still cause other races but they seem userspace concurrency control problems. Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230317113318.31327-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11serial: fix TIOCSRS485 lockingJohan Hovold1-2/+2
commit 9e4f2a8004213339e9d837d891a59cc80e082966 upstream. The RS485 multipoint addressing support for some reason added a new ADDRB termios cflag which is (only!) updated from one of the RS485 ioctls. Make sure to take the termios rw semaphore for the right ioctl (i.e. set, not get). Fixes: ae50bb275283 ("serial: take termios_rwsem for ->rs485_config() & pass termios as param") Cc: stable@vger.kernel.org # 6.0 Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20230412124811.11217-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSHIlpo Järvinen3-14/+37
commit 094fb49a2d0d6827c86d2e0840873e6db0c491d2 upstream. If userspace races tcsetattr() with a write, the drained condition might not be guaranteed by the kernel. There is a race window after checking Tx is empty before tty_set_termios() takes termios_rwsem for write. During that race window, more characters can be queued by a racing writer. Any ongoing transmission might produce garbage during HW's ->set_termios() call. The intent of TCSADRAIN/FLUSH seems to be preventing such a character corruption. If those flags are set, take tty's write lock to stop any writer before performing the lower layer Tx empty check and wait for the pending characters to be sent (if any). The initial wait for all-writers-done must be placed outside of tty's write lock to avoid deadlock which makes it impossible to use tty_wait_until_sent(). The write lock is retried if a racing write is detected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230317113318.31327-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13serial: 8250: Prevent starting up DMA Rx on THRI interruptIlpo Järvinen1-0/+11
commit 90b8596ac46043e4a782d9111f5b285251b13756 upstream. Hans de Goede reported Bluetooth adapters (HCIs) connected over an UART connection failed due corrupted Rx payload. The problem was narrowed down to DMA Rx starting on UART_IIR_THRI interrupt. The problem occurs despite LSR having DR bit set, which is precondition for attempting to start DMA Rx in the first place. From a debug patch: [x.807834] 8250irq: iir=cc lsr+saved=60 received=0/15 ier=0f dma_t/rx/err=0/0/0 [x.808676] 8250irq: iir=c2 lsr+saved=61 received=0/0 ier=0f dma_t/rx/err=0/0/0 [x.808776] 8250irq: iir=cc lsr+saved=60 received=1/12 ier=0d dma_t/rx/err=0/1/0 [x.808870] Bluetooth: hci0: Frame reassembly failed (-84) In the debug snippet, received field indicates 1 byte was transferred over DMA and 12 bytes after that with the non-DMA Rx. The sole byte DMA handled was corrupted (gets zeroed) which leads to the HCI failure. This problem became apparent after commit e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA") changed Tx stop behavior. Tx stop is now triggered from a THRI interrupt. Despite that this problem looks like a HW bug, this fix is not adding UART_BUG_xx flag to the driver beucase it seems useful in general to avoid starting DMA when there are only a few bytes to transfer. Skipping DMA for small transfers avoids the extra overhead DMA incurs. Thus, don't setup DMA Rx on UART_IIR_THRI but leave it to a subsequent interrupt which has Rx a related IIR value. By returning false from handle_rx_dma(), the DMA vs non-DMA decision is postponed until either UART_IIR_RDI (FIFO threshold worth of bytes awaiting) or UART_IIR_TIMEOUT (inter-character timeout) triggers at a later time which allows better to discern whether the number of bytes warrants starting DMA or not. Reported-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Fixes: e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230317103034.12881-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13tty: serial: fsl_lpuart: avoid checking for transfer complete when ↵Sherry Sun1-1/+7
UARTCTRL_SBK is asserted in lpuart32_tx_empty commit 9425914f3de6febbd6250395f56c8279676d9c3c upstream. According to LPUART RM, Transmission Complete Flag becomes 0 if queuing a break character by writing 1 to CTRL[SBK], so here need to avoid checking for transmission complete when UARTCTRL_SBK is asserted, otherwise the lpuart32_tx_empty may never get TIOCSER_TEMT. Commit 2411fd94ceaa("tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted") only fix it in lpuart32_set_termios(), here also fix it in lpuart32_tx_empty(). Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support") Cc: stable <stable@kernel.org> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20230323054415.20363-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13tty: serial: sh-sci: Fix Rx on RZ/G2L SCIBiju Das1-1/+1
commit f92ed0cd9328aed918ebb0ebb64d259eccbcc6e7 upstream. SCI IP on RZ/G2L alike SoCs do not need regshift compared to other SCI IPs on the SH platform. Currently, it does regshift and configuring Rx wrongly. Drop adding regshift for RZ/G2L alike SoCs. Fixes: dfc80387aefb ("serial: sh-sci: Compute the regshift value for SCI ports") Cc: stable@vger.kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230321114753.75038-3-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13tty: serial: sh-sci: Fix transmit end interrupt handlerBiju Das1-0/+8
commit b43a18647f03c87e77d50d6fe74904b61b96323e upstream. The fourth interrupt on SCI port is transmit end interrupt compared to the break interrupt on other port types. So, shuffle the interrupts to fix the transmit end interrupt handler. Fixes: e1d0be616186 ("sh-sci: Add h8300 SCI") Cc: stable <stable@kernel.org> Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230317150403.154094-1-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06tty: serial: fsl_lpuart: fix race on RX DMA shutdownAlexander Sverdlin1-8/+3
[ Upstream commit 1be6f2b15f902c02e055ae0b419ca789200473c9 ] From time to time DMA completion can come in the middle of DMA shutdown: <process ctx>: <IRQ>: lpuart32_shutdown() lpuart_dma_shutdown() del_timer_sync() lpuart_dma_rx_complete() lpuart_copy_rx_to_tty() mod_timer() lpuart_dma_rx_free() When the timer fires a bit later, sport->dma_rx_desc is NULL: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 pc : lpuart_copy_rx_to_tty+0xcc/0x5bc lr : lpuart_timer_func+0x1c/0x2c Call trace: lpuart_copy_rx_to_tty lpuart_timer_func call_timer_fn __run_timers.part.0 run_timer_softirq __do_softirq __irq_exit_rcu irq_exit handle_domain_irq gic_handle_irq call_on_irq_stack do_interrupt_handler ... To fix this fold del_timer_sync() into lpuart_dma_rx_free() after dmaengine_terminate_sync() to make sure timer will not be re-started in lpuart_copy_rx_to_tty() <= lpuart_dma_rx_complete(). Fixes: 4a8588a1cf86 ("serial: fsl_lpuart: delete timer on shutdown") Cc: stable <stable@kernel.org> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://lore.kernel.org/r/20230309134302.74940-2-alexander.sverdlin@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* APISherry Sun1-4/+4
[ Upstream commit 8682ab0eea89c300ebb120c02ead3999ca5560a8 ] Convert dmaengine_terminate_all() calls to synchronous and asynchronous versions where appropriate. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20221123023619.30173-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 1be6f2b15f90 ("tty: serial: fsl_lpuart: fix race on RX DMA shutdown") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30hvc/xen: prevent concurrent accesses to the shared ringRoger Pau Monne1-2/+17
[ Upstream commit 6214894f49a967c749ee6c07cb00f9cede748df4 ] The hvc machinery registers both a console and a tty device based on the hv ops provided by the specific implementation. Those two interfaces however have different locks, and there's no single locks that's shared between the tty and the console implementations, hence the driver needs to protect itself against concurrent accesses. Otherwise concurrent calls using the split interfaces are likely to corrupt the ring indexes, leaving the console unusable. Introduce a lock to xencons_info to serialize accesses to the shared ring. This is only required when using the shared memory console, concurrent accesses to the hypercall based console implementation are not an issue. Note the conditional logic in domU_read_console() is slightly modified so the notify_daemon() call can be done outside of the locked region: it's an hypercall and there's no need for it to be done with the lock held. Fixes: b536b4b96230 ('xen: use the hvc console infrastructure for Xen console') Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20221130150919.13935-1-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22serial: 8250: ASPEED_VUART: select REGMAP instead of depending on itRandy Dunlap1-1/+2
commit f8086d1a65ac693e3fd863128352b4b11ee7324d upstream. REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". Fixes: 8d310c9107a2 ("drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable") Cc: stable <stable@kernel.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oskar Senft <osk@google.com> Cc: linux-serial@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-9-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22serial: 8250_fsl: fix handle_irq lockingJohan Hovold1-2/+2
commit 6e01f9a594ee0f69fb52cc8d11971612b4817f0b upstream. The 8250 handle_irq callback is not just called from the interrupt handler but also from a timer callback when polling (e.g. for ports without an interrupt line). Consequently the callback must explicitly disable interrupts to avoid a potential deadlock with another interrupt in polled mode. Fix up the two paths in the freescale callback that failed to re-enable interrupts when polling. Fixes: 853a9ae29e97 ("serial: 8250: fix handle_irq locking") Cc: stable@vger.kernel.org # 5.13 Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/Y/xYzqp4ogmOF5t0@kili Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230227085046.24282-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22serial: 8250_em: Fix UART port typeBiju Das1-2/+2
commit 32e293be736b853f168cd065d9cbc1b0c69f545d upstream. As per HW manual for EMEV2 "R19UH0040EJ0400 Rev.4.00", the UART IP found on EMMA mobile SoC is Register-compatible with the general-purpose 16750 UART chip. Fix UART port type as 16750 and enable 64-bytes fifo support. Fixes: 22886ee96895 ("serial8250-em: Emma Mobile UART driver V2") Cc: stable@vger.kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230227114152.22265-2-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-12 03:50:54 +0300