summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/serial_mctrl_gpio.c
AgeCommit message (Collapse)AuthorFilesLines
2016-06-26serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios structYegor Yefremov1-0/+18
This workaround is needed for the cases, where mctrl_gpio API is used before mctrl_gpio_init() was invoked. This happens in 8250 during console initialization, as the driver sets DTR signal. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26serial: mctrl_gpio: add modem control read routineYegor Yefremov1-0/+18
mctrl_gpio_get_outputs() returns the state of following signals: RTS, DTR While defining the routine for reading outputs, fix the comment for mctrl_gpio_get() routine as it returns only the state of the input signals. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01serial: mctrl_gpio: Drop support for out1-gpios and out2-gpiosGeert Uytterhoeven1-2/+0
The OUT1 and OUT2 pins present on some legacy UARTs are basically GPIOs. It doesn't make much sense to emulate GPIOs using other GPIOs, hence drop support for that. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Reviewed-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01serial: mctrl_gpio: add IRQ lockingYegor Yefremov1-0/+5
uart_handle_cts_change should be called with port->lock held. And for this to be save you must also disable irqs. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-08serial: mctrl_gpio: Add missing module licenseRomain Izard1-0/+3
As the mctrl_gpio driver can be built as a module, it needs to have its license specified with MODULE_LICENSE. Otherwise, it cannot access required symbols exported through EXPORT_SYMBOL_GPL. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-14serial: mctrl_gpio: export mctrl_gpio_disable_ms and mctrl_gpio_initUwe Kleine-König1-0/+2
To be able to make use of the mctrl-gpio helper from a module these functions must be exported. This was forgotten in the commit introducing support interrupt handling for these functions (while it was done for mctrl_gpio_enable_ms, *sigh*). Fixes: ce59e48fdbad ("serial: mctrl_gpio: implement interrupt handling") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: mctrl_gpio: implement interrupt handlingUwe Kleine-König1-2/+127
This allows to reduce the per-driver boiler plate considerably. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: mctrl-gpio: rename init functionUwe Kleine-König1-2/+2
This is done before adding more functionality to the init function with the existing name. As this new functionality conflicts with stuff drivers are required to implement themselves up to I want to convert them one by one to make reviewing and reverting more easy in case I broke something. Once mctrl_gpio_init is there and all drivers are converted mctrl_gpio_init_noauto can be removed again. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-27Merge tag 'tty-4.2-rc1' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here's the tty and serial driver patches for 4.2-rc1. A number of individual driver updates, some code cleanups, and other minor things, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (152 commits) Doc: serial-rs485.txt: update RS485 driver interface Doc: tty.txt: remove mention of the BKL MAINTAINERS: tty: add serial docs directory serial: sprd: check for NULL after calling devm_clk_get serial: 8250_pci: Correct uartclk for xr17v35x expansion chips serial: 8250_pci: Add support for 12 port Exar boards serial: 8250_uniphier: add bindings document for UniPhier UART serial: core: cleanup in uart_get_baud_rate() serial: stm32-usart: Add STM32 USART Driver tty/serial: kill off set_irq_flags usage tty: move linux/gsmmux.h to uapi doc: dt: add documentation for nxp,lpc1850-uart serial: 8250: add LPC18xx/43xx UART driver serial: 8250_uniphier: add UniPhier serial driver serial: 8250_dw: support ACPI platforms with integrated DMA engine serial: of_serial: check the return value of clk_prepare_enable() serial: of_serial: use devm_clk_get() instead of clk_get() serial: earlycon: Add support for big-endian MMIO accesses serial: sirf: use hrtimer for data rx serial: sirf: correct the fifo empty_bit ...
2015-06-01gpiolib: rename gpiod_set_array to gpiod_set_array_valueRojhalat Ibrahim1-1/+1
There have been concerns that the function names gpiod_set_array() and gpiod_get_array() might be confusing to users. One might expect gpiod_get_array() to return array values, while it is actually the array counterpart of gpiod_get(). To be consistent with the single descriptor API we could rename gpiod_set_array() to gpiod_set_array_value(). This makes some function names a bit lengthy: gpiod_set_raw_array_value_cansleep(). Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-24serial: mctrl-gpio: drop usages of IS_ERR_OR_NULLUwe Kleine-König1-3/+2
The function mctrl_gpio_init returns failure if the assignment to any member of the gpio array results in an error pointer. So there is no need to check for such error values in the other functions. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-11serial: mctrl_gpio: Fix build warningsFabio Estevam1-2/+1
Fix the following build warnings: drivers/tty/serial/serial_mctrl_gpio.c: In function 'mctrl_gpio_init': drivers/tty/serial/serial_mctrl_gpio.c:110:4: warning: return makes pointer from integer without a cast return PTR_ERR(gpios->gpio[i]); ^ /home/build/work/batch/drivers/tty/serial/serial_mctrl_gpio.c:90:6: warning: unused variable 'err' [-Wunused-variable] int err; ^ Return ERR_CAST and remove the unused 'err' variable to fix them. Fixes: 1d267ea6539f ("serial: mctrl-gpio: simplify init routine") Reported-by: Olof's autobuilder <build@lixom.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07serial: mctrl-gpio: simplify init routineUwe Kleine-König1-18/+11
Instead of ignoring errors returned by devm_gpiod_get_index use devm_gpiod_get_index_optional which results in slightly more strict error handling which is good. Also use the fourth parameter to devm_gpiod_get_index_optional to be able to drop the explicit direction setting. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07serial: mctrl-gpio: don't check for struct mctrl_gpios * to be invalidUwe Kleine-König1-18/+2
Drivers using mctrl-gpio must not pass invalid values for struct mctrl_gpios *. All drivers were fixed in this regard and so some checks can go away or be simplified. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02serial: mctrl_gpio: use gpiod_set_array functionRojhalat Ibrahim1-3/+9
Make the serial_mctrl_gpio driver the first user of the new gpiod_set_array function, which is now available in the linux-gpio devel tree. All modem control output signals are now set simultaneously. Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-20tty: serial_mctrl_gpio: Fix COMPILE_TEST build for architectures with custom ↵Alexander Shiyan1-1/+1
termios.h This patch fixes COMPILE_TEST build of serial_mctrl_gpio module for architectures with custom termios.h header. sparc64:allmodconfig: In file included from drivers/tty/serial/serial_mctrl_gpio.c:21:0: include/uapi/asm-generic/termios.h:22:8: error: redefinition of 'struct termio' ./arch/sparc/include/uapi/asm/termbits.h:16:8: note: originally defined here make[3]: *** [drivers/tty/serial/serial_mctrl_gpio.o] Error 1 Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28tty/serial: Add GPIOLIB helpers for controlling modem linesRichard Genoud1-0/+143
This patch add some helpers to control modem lines (CTS/RTS/DSR...) via GPIO. This will be useful for many boards which have a serial controller that only handle CTS/RTS pins (or even just RX/TX). Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-07 06:05:25 +0300