summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/serial-tegra.c
AgeCommit message (Collapse)AuthorFilesLines
2023-11-23serial: tegra: Convert to platform remove callback returning voidUwe Kleine-König1-3/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231110152927.70601-37-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-18serial: tegra: Use port lock wrappersThomas Gleixner1-16/+16
When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20230914183831.587273-57-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: tegra: handle clk prepare error in tegra_uart_hw_init()Yi Yang1-1/+5
In tegra_uart_hw_init(), the return value of clk_prepare_enable() should be checked since it might fail. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Signed-off-by: Yi Yang <yiyang13@huawei.com> Link: https://lore.kernel.org/r/20230817105406.228674-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-25serial: tegra: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-7/+2
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230712062853.11007-5-frank.li@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-25serial: tegra: Don't print error on probe deferralJon Hunter1-4/+2
If the Tegra serial driver is probe before clocks are available then the following error is seen on boot: serial-tegra 3100000.serial: Couldn't get the clock This has been observed on Jetson AGX Orin. Fix this by calling dev_err_probe() instead of dev_err() to avoid printing an error on probe deferral. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20230703113759.75608-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-25tty: Explicitly include correct DT includesRob Herring1-1/+0
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # for imx Link: https://lore.kernel.org/r/20230724205440.767071-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-25serial: drivers: switch ch and flag to u8Jiri Slaby1-4/+3
Now that the serial layer explicitly expects 'u8' for flags and characters, propagate this type to drivers' (RX) routines. Note that amba-pl011's, clps711x's and st-asc's 'ch' are left unchanged because 'ch' contains not only a character, but whole status. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: "Maciej W. Rozycki" <macro@orcam.me.uk> Cc: Taichi Sugaya <sugaya.taichi@socionext.com> Cc: Takao Orito <orito.takao@socionext.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Hammer Hsieh <hammerh0314@gmail.com> Acked-by: Richard GENOUD <richard.genoud@gmail.com> Acked-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/20230712081811.29004-11-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init()Yi Yang1-1/+6
Add the missing clk_disable_unprepare() before return from tegra_uart_hw_init() in the error handling path. When request_irq() fails in tegra_uart_startup(), 'tup->uart_clk' has been enabled, fix it by adding clk_disable_unprepare(). Fixes: cc9ca4d95846 ("serial: tegra: Only print FIFO error message when an error occurs") Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors") Signed-off-by: Yi Yang <yiyang13@huawei.com> Link: https://lore.kernel.org/r/20221126020852.113378-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03serial: tegra: Read DMA status before terminatingKartik1-2/+4
Read the DMA status before terminating the DMA, as doing so deletes the DMA desc. Also, to get the correct transfer status information, pause the DMA using dmaengine_pause() before reading the DMA status. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Signed-off-by: Kartik <kkartik@nvidia.com> Link: https://lore.kernel.org/r/1666105086-17326-1-git-send-email-kkartik@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03serial: tegra: Use uart_xmit_advance()Ilpo Järvinen1-2/+1
Take advantage of the new uart_xmit_advance() helper. Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20221019091151.6692-32-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-25Merge 7e2cd21e02b3 ("Merge tag 'tty-6.0-rc7' of ↵Greg Kroah-Hartman1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next We need the tty fixes and api additions in this branch. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07serial: tegra: Use uart_xmit_advance(), fixes icount.tx accountingIlpo Järvinen1-3/+2
DMA complete & stop paths did not correctly account Tx'ed characters into icount.tx. Using uart_xmit_advance() fixes the problem. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Cc: <stable@vger.kernel.org> # serial: Create uart_xmit_advance() Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220901143934.8850-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30serial: tegra: Remove custom frame size calculationIlpo Järvinen1-9/+3
The number of bits can be calculated using tty_get_frame_size(), no need for the driver to do it on its own. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220830084925.5608-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30serial: Make ->set_termios() old ktermios constIlpo Järvinen1-1/+2
There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27drivers: tty: serial: Add missing of_node_put() in serial-tegra.cLiang He1-0/+1
In tegra_uart_init(), of_find_matching_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220615111747.3963930-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: tegra: fix typos in commentsJulia Lawall1-2/+2
Spelling mistakes (triple letters) in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220521111145.81697-23-Julia.Lawall@inria.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-28tty: serial: make use of UART_LCR_WLEN() + tty_get_char_size()Jiri Slaby1-18/+4
Having a generic UART_LCR_WLEN() macro and the tty_get_char_size() helper, we can remove all those repeated switch-cases in drivers. Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220224095558.30929-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30Patrik John1-2/+2
The current implementation uses 0 as lower limit for the baud rate tolerance for tegra20 and tegra30 chips which causes isses on UART initialization as soon as baud rate clock is lower than required even when within the standard UART tolerance of +/- 4%. This fix aligns the implementation with the initial commit description of +/- 4% tolerance for tegra chips other than tegra186 and tegra194. Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors") Cc: stable <stable@vger.kernel.org> Signed-off-by: Patrik John <patrik.john@u-blox.com> Link: https://lore.kernel.org/r/sig.19614244f8.20211123132737.88341-1-patrik.john@u-blox.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26serial: tegra: Use of_device_get_match_dataTang Bin1-4/+2
Retrieve OF match data, it's better and cleaner to use 'of_device_get_match_data' over 'of_match_device'. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210822032806.3256-3-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21serial: tegra: Only print FIFO error message when an error occursJon Hunter1-2/+4
The Tegra serial driver always prints an error message when enabling the FIFO for devices that have support for checking the FIFO enable status. Fix this by displaying the error message, only when an error occurs. Finally, update the error message to make it clear that enabling the FIFO failed and display the error code. Fixes: 222dcdff3405 ("serial: tegra: check for FIFO mode enabled status") Cc: <stable@vger.kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20210630125643.264264-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13serial: tegra: Fix a mask operation that is always trueColin Ian King1-1/+1
Currently the expression lsr | UART_LSR_TEMT is always true and this seems suspect. I believe the intent was to mask lsr with UART_LSR_TEMT to check that bit, so the expression should be using the & operator instead. Fix this. Fixes: b9c2470fb150 ("serial: tegra: flush the RX fifo on frame error") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210426105514.23268-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: serial-tegra: Provide some missing struct member descriptionsLee Jones1-0/+5
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/serial-tegra.c:94: warning: Function parameter or member 'fifo_mode_enable_status' not described in 'tegra_uart_chip_data' drivers/tty/serial/serial-tegra.c:94: warning: Function parameter or member 'uart_max_port' not described in 'tegra_uart_chip_data' drivers/tty/serial/serial-tegra.c:94: warning: Function parameter or member 'max_dma_burst_bytes' not described in 'tegra_uart_chip_data' drivers/tty/serial/serial-tegra.c:94: warning: Function parameter or member 'error_tolerance_low_range' not described in 'tegra_uart_chip_data' drivers/tty/serial/serial-tegra.c:94: warning: Function parameter or member 'error_tolerance_high_range' not described in 'tegra_uart_chip_data' Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-serial@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104193549.4026187-31-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: serial-tegra: Struct headers should start with 'struct <name>'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/serial-tegra.c:85: warning: cannot understand function prototype: 'struct tegra_uart_chip_data ' Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-serial@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104193549.4026187-25-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-27Merge 5.8-rc7 into tty-nextGreg Kroah-Hartman1-9/+7
we need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21serial: tegra: drop bogus NULL tty-port checksJohan Hovold1-9/+4
The struct tty_port is part of the uart state and will never be NULL in the receive helpers. Drop the bogus NULL checks and rename the pointer-variables "port" to differentiate them from struct tty_struct pointers (which can be NULL). Fixes: 962963e4ee23 ("serial: tegra: Switch to using struct tty_port") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200710135947.2737-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21serial: tegra: fix CREAD handling for PIOJohan Hovold1-2/+5
Commit 33ae787b74fc ("serial: tegra: add support to ignore read") added support for dropping input in case CREAD isn't set, but for PIO the ignore_status_mask wasn't checked until after the character had been put in the receive buffer. Note that the NULL tty-port test is bogus and will be removed by a follow-on patch. Fixes: 33ae787b74fc ("serial: tegra: add support to ignore read") Cc: stable <stable@vger.kernel.org> # 5.4 Cc: Shardar Shariff Md <smohammed@nvidia.com> Cc: Krishna Yarlagadda <kyarlagadda@nvidia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200710135947.2737-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-27serial: serial-tegra: reduce irq-latency after rx errorsRandolph Maaßen1-3/+3
Since dev_err() calls can lead to synchronous writes to another serial console these calls can provide significant latency during irq-handling in tegra_uart_isr(). With this latency another interrupt is likely to apper during handling of the first interrupt, which might lock up the kernel completely. These errors are reported to the error counters so converting the dev_err() to dev_dbg() is appropriate. Signed-off-by: Randolph Maaßen <gaireg@gaireg.de> Link: https://lore.kernel.org/r/20200605145714.9964-1-gaireg@gaireg.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't startedDmitry Osipenko1-19/+16
It is possible to get an instant RX timeout or end-of-transfer interrupt before RX DMA was started, if transaction is less than 16 bytes. Transfer should be handled in PIO mode in this case because DMA can't handle it. This patch brings back the original behaviour of the driver that was changed by accident by a previous commit, it fixes occasional Bluetooth HW initialization failures which I started to notice recently. Fixes: d5e3fadb7012 ("tty: serial: tegra: Activate RX DMA transfer by request") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200209164415.9632-1-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14tty: serial: tegra: Optimize DMA buffer synchronizationDmitry Osipenko1-7/+9
Synchronize only the dirty part of DMA buffer in order to avoid unnecessary overhead of syncing of the clean part, which is the case of every serial DMA transfer in practice. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200112180919.5194-3-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14tty: serial: tegra: Activate RX DMA transfer by requestDmitry Osipenko1-32/+46
This allows DMA engine to go into runtime-suspended mode whenever there is no data to receive, instead of keeping DMA active all the time while TTY is opened (i.e. permanently active in practice, like in the case of UART Bluetooth). Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200112180919.5194-2-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13tty: serial: tegra: Use dma_request_chan() directly for channel requestPeter Ujfalusi1-2/+1
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113094618.1725-4-peter.ujfalusi@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: Add PIO mode supportKrishna Yarlagadda1-31/+86
Add PIO mode support in receive and transmit path with RX interrupt trigger of 16 bytes for Tegra194 and older chips. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-13-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: report clk rate errorsKrishna Yarlagadda1-2/+57
Standard UART controllers support +/-4% baud rate error tolerance. Tegra186 only supports 0% to +4% error tolerance whereas other Tegra chips support standard +/-4% rate. Add chip data for knowing error tolerance level for each soc. Creating new compatible for Tegra194 chip as it supports baud rate error tolerance of -2 to +2%, different from older chips. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-12-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: add support to adjust baud rateKrishna Yarlagadda1-0/+68
Add support to adjust baud rates to fall under supported tolerance range through DT. Tegra186 chip has a hardware issue resulting in frame errors when tolerance level for baud rate is negative. Provided entries to adjust baud rate to be within acceptable range and work with devices that can send negative baud rate. Also report error when baud rate set is out of tolerance range of controller updated in device tree. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-11-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: add support to use 8 bytes triggerKrishna Yarlagadda1-2/+11
Add support to use 8 bytes trigger for Tegra186 SOC. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-9-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: set maximum num of uart ports to 8Krishna Yarlagadda1-2/+17
Set maximum number of UART ports to 8 as older chips have 5 ports and Tergra186 and later chips will have 8 ports. Add this info to chip data. Read device tree compatible of this driver and register uart driver with max ports of matching chip data. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-8-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: check for FIFO mode enabled statusKrishna Yarlagadda1-6/+46
Chips prior to Tegra186 needed delay of 3 UART clock cycles to avoid data loss. This issue is fixed in Tegra186 and a new flag is added to check if FIFO mode is enabled. chip data updated to check if this flag is available for a chip. Tegra186 has new compatible to enable this flag. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-7-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: report error to upper tty layerKrishna Yarlagadda1-3/+16
Report overrun/parity/frame/break errors to top tty layer. Add support to ignore break character if IGNBRK is set. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-5-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: flush the RX fifo on frame errorShardar Shariff Md1-0/+14
FIFO reset/flush code implemented now does not follow programming guidelines. RTS line has to be turned off while flushing FIFOs to avoid new transfers. Also check LSR bits UART_LSR_TEMT and UART_LSR_DR to confirm FIFOs are flushed. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-4-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: avoid reg access when clk disabledAhung Cheng1-6/+11
This avoids two race conditions from the UART shutdown sequence both leading to 'Machine check error in AXI2APB' and kernel oops. One was that the clock was disabled before the DMA was terminated making it possible for the DMA callbacks to be called after the clock was disabled. These callbacks could write to the UART registers causing timeout. The second was that the clock was disabled before the UART was completely flagged as closed. This is done after the shutdown is called and a new write could be started after the clock was disabled. tegra_uart_start_pio_tx could be called causing timeout. Given that the baud rate is reset at the end of shutdown sequence, this fix is to examine the baud rate to avoid register access from both race conditions. Besides, terminate the DMA before disabling the clock. Signed-off-by: Ahung Cheng <ahcheng@nvidia.com> Signed-off-by: Shardar Mohammed <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-3-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: add support to ignore readShardar Shariff Md1-0/+12
Add support to ignore read characters if CREAD flag is not set. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-2-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: tegra: protect IER against LCR.DLABAhung Cheng1-0/+3
The IER and DLH registers occupy the same address space, selected by the LCR.DLAB bit. Hence, add port lock to protect IER when LCR.DLAB bit is set. Signed-off-by: Ahung Cheng <ahcheng@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/1565609303-27000-5-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: tegra: add internal loopback functionalityAndreas Abel1-4/+22
Add the internal loopback functionality that can be enabled with TIOCM_LOOP. Signed-off-by: Andreas Abel <aabel@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/1565609303-27000-2-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04tty: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-3/+1
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-45-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09serial: tegra: fix some spelling mistakesMarcel Ziswiler1-5/+5
Fix a few spelling mistakes I stumbled upon while debugging a customers UART issues. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08tty: serial: Remove redundant license textGreg Kroah-Hartman1-12/+0
Now that the SPDX tag is in all tty files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Jiri Slaby <jslaby@suse.com> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08tty: add SPDX identifiers to all remaining files in drivers/tty/Greg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/tty files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Jiri Slaby <jslaby@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: James Hogan <jhogan@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: "Uwe Kleine-König" <kernel@pengutronix.de> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-30serial: tegra: explicitly request exclusive reset controlPhilipp Zabel1-1/+1
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-serial@vger.kernel.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-27tty: serial: constify uart_ops structuresBhumika Goyal1-1/+1
Declare uart_ops structures as const as they are only stored in the ops field of an uart_port structure. This field is of type const, so uart_ops structures having this property can be made const too. File size details before and after patching. First line of every .o file shows the file size before patching and second line shows the size after patching. text data bss dec hex filename 2977 456 64 3497 da9 drivers/tty/serial/amba-pl010.o 3169 272 64 3505 db1 drivers/tty/serial/amba-pl010.o 3109 456 0 3565 ded drivers/tty/serial/efm32-uart.o 3301 272 0 3573 df5 drivers/tty/serial/efm32-uart.o 10668 753 1 11422 2c9e drivers/tty/serial/icom.o 10860 561 1 11422 2c9e drivers/tty/serial/icom.o 23904 408 8 24320 5f00 drivers/tty/serial/ioc3_serial.o 24088 224 8 24320 5f00 drivers/tty/serial/ioc3_serial.o 10516 560 4 11080 2b48 drivers/tty/serial/ioc4_serial.o 10709 368 4 11081 2b49 drivers/tty/serial/ioc4_serial.o 7853 648 1216 9717 25f5 drivers/tty/serial/mpsc.o 8037 456 1216 9709 25ed drivers/tty/serial/mpsc.o 10248 456 0 10704 29d0 drivers/tty/serial/omap-serial.o 10440 272 0 10712 29d8 drivers/tty/serial/omap-serial.o 8122 532 1984 10638 298e drivers/tty/serial/pmac_zilog.o 8306 340 1984 10630 2986 drivers/tty/serial/pmac_zilog.o 3808 456 0 4264 10a8 drivers/tty/serial/pxa.o 4000 264 0 4264 10a8 drivers/tty/serial/pxa.o 21781 3864 0 25645 642d drivers/tty/serial/serial-tegra.o 22037 3608 0 25645 642d drivers/tty/serial/serial-tegra.o 2481 456 96 3033 bd9 drivers/tty/serial/sprd_serial.o 2673 272 96 3041 be1 drivers/tty/serial/sprd_serial.o 5534 300 512 6346 18ca drivers/tty/serial/vr41xx_siu.o 5630 204 512 6346 18ca drivers/tty/serial/vr41xx_siu.o 6730 1576 128 8434 20f2 drivers/tty/serial/vt8500_serial.o 6986 1320 128 8434 20f2 drivers/tty/serial/vt8500_serial.o Cross compiled for mips architecture. 3005 488 0 3493 da5 drivers/tty/serial/pnx8xxx_uart.o 3189 304 0 3493 da5 drivers/tty/serial/pnx8xxx_uart.o 4272 196 1056 5524 1594 drivers/tty/serial/dz.o 4368 100 1056 5524 1594 drivers/tty/serial/dz.o 6551 144 16 6711 1a37 drivers/tty/serial/ip22zilog.o 6647 48 16 6711 1a37 drivers/tty/serial/ip22zilog.o 9612 428 1520 11560 2d28 drivers/tty/serial/serial_txx9.o 9708 332 1520 11560 2d28 drivers/tty/serial/serial_txx9.o 4156 296 16 4468 1174 drivers/tty/serial/ar933x_uart.o 4252 200 16 4468 1174 drivers/tty/serial/ar933x_uart.o Cross compiled for arm archiecture. 11716 1780 44 13540 34e4 drivers/tty/serial/sirfsoc_uart.o 11808 1688 44 13540 34e4 drivers/tty/serial/sirfsoc_uart.o 13352 596 56 14004 36b4 drivers/tty/serial/amba-pl011.o 13444 504 56 14004 36b4 drivers/tty/serial/amba-pl011.o Cross compiled for sparc architecture. 4664 528 32 5224 1468 drivers/tty/serial/sunhv.o 4848 344 32 5224 1468 drivers/tty/serial/sunhv.o 8080 332 28 8440 20f8 drivers/tty/serial/sunzilog.o 8184 228 28 8440 20f8 drivers/tty/serial/sunzilog.o Cross compiled for ia64 architecture. 10226 549 472 11247 2bef drivers/tty/serial/sn_console.o 10414 365 472 11251 2bf3 drivers/tty/serial/sn_console.o The files drivers/tty/serial/zs.o, drivers/tty/serial/lpc32xx_hs.o and drivers/tty/serial/lantiq.o did not compile. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-02 08:37:31 +0300