summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/amba-pl010.c
AgeCommit message (Collapse)AuthorFilesLines
2014-11-07serial: Test/disable MSIs if switching from N_PPSPeter Hurley1-1/+17
Switching to the N_PPS line discipline may require enabling modem status interrupts; conversely switching from N_PPS may require disabling modem status interrupts. Affected drivers: 8250 amba-pl010 atmel Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial: Take uart port lock for direct *_enable_ms()Peter Hurley1-0/+2
Three UART drivers (8250, atmel & amba-pl010) directly call their enable_ms() method; the uart port lock must be acquired before any h/w programming. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial: core: Pass termios to set_ldisc() notificationsPeter Hurley1-2/+2
UART drivers which enable modem status interrupts when switching to N_PPS line discipline need to determine if modem status interrupts should be disabled when switching from N_PPS. Specifically, the set_ldisc() notification needs to evaluate UART_ENABLE_MS() which requires termios->c_cflag. Convert in-tree UART drivers to new interface. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06serial: amba-pl010: use container_of to resolve uart_amba_port from uart_portFabian Frederick1-12/+24
Use container_of instead of casting first structure member. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10serial: amba-pl010: Use devres APIsTushar Behera1-32/+16
Migrating to use devres managed APIs devm_kzalloc, devm_ioremap and devm_clk_get. Signed-off-by: Tushar Behera <tushar.b@samsung.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20serial: Fix IGNBRK handlingPeter Hurley1-1/+1
If IGNBRK is set without either BRKINT or PARMRK set, some uart drivers send a 0x00 byte for BREAK without the TTYBREAK flag to the line discipline, when it should send either nothing or the TTYBREAK flag set. This happens because the read_status_mask masks out the BI condition, which uart_insert_char() then interprets as a normal 0x00 byte. SUS v3 is clear regarding the meaning of IGNBRK; Section 11.2.2, General Terminal Interface - Input Modes, states: "If IGNBRK is set, a break condition detected on input shall be ignored; that is, not put on the input queue and therefore not read by any process." Fix read_status_mask to include the BI bit if IGNBRK is set; the lsr status retains the BI bit if a BREAK is recv'd, which is subsequently ignored in uart_insert_char() when masked with the ignore_status_mask. Affected drivers: 8250 - all serial_txx9 mfd amba-pl010 amba-pl011 atmel_serial bfin_uart dz ip22zilog max310x mxs-auart netx-serial pnx8xxx_uart pxa sb1250-duart sccnxp serial_ks8695 sirfsoc_uart st-asc vr41xx_siu zs sunzilog fsl_lpuart sunsab ucc_uart bcm63xx_uart sunsu efm32-uart pmac_zilog mpsc msm_serial m32r_sio Unaffected drivers: omap-serial rp2 sa1100 imx icom Annotated for fixes: altera_uart mcf Drivers without break detection: 21285 xilinx-uartps altera_jtaguart apbuart arc-uart clps711x max3100 uartlite msm_serial_hs nwpserial lantiq vt8500_serial Unknown: samsung mpc52xx_uart bfin_sport_uart cpm_uart/core Fixes: Bugzilla #71651, '8250_core.c incorrectly handles IGNBRK flag' Reported-by: Ivan <athlon_@mail.ru> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-09serial: pl010: Convert to modern PM opsUlf Hansson1-6/+9
Convert to modern PM ops and use the SIMPLE_DEV_PM_OPS macro to set up the PM callbacks. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-04serial: Remove unnecessary amba_set_drvdata()Michal Simek1-3/+0
Driver core clears the driver data to NULL after device_release or on probe failure, so just remove it from here. Driver core change: "device-core: Ensure drvdata = NULL when no driver is bound" (sha1: 0998d0631001288a5974afc0b2a5f568bcdecb4d) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-01serial: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16TTY: switch tty_flip_buffer_pushJiri Slaby1-2/+1
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05drivers/tty/serial/amba-pl0{10,11}.c: use clk_prepare_enable and ↵Julia Lawall1-11/+4
clk_disable_unprepare Clk_prepare_enable and clk_disable_unprepare combine clk_prepare and clk_enable, and clk_disable and clk_unprepare. The9 make the code more concise, and ensure that clk_unprepare is called when clk_enable fails. A simplified version of the semantic patch that introduces calls to these functions is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ - clk_prepare(e); - clk_enable(e); + clk_prepare_enable(e); @@ expression e; @@ - clk_disable(e); - clk_unprepare(e); + clk_disable_unprepare(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2011-11-22serial: pl010: Enable module alias autogeneration for AMBA driversDave Martin1-0/+2
Signed-off-by: Dave Martin <dave.martin@linaro.org>
2011-09-27clk: amba-pl010: convert to clk_prepare()/clk_unprepare()Russell King1-1/+13
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-20tty: remove invalid location line in file headerJovi Zhang1-2/+0
remove invalid location line in each file header after location moved from driver/char to driver/tty Signed-off-by: Jovi Zhang <bookjovi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23ARM: amba: make probe() functions take const id tablesRussell King1-1/+1
Make Primecell driver probe functions take a const pointer to their ID tables. Drivers should never modify their ID tables in their probe handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-13tty: move drivers/serial/ to drivers/tty/serial/Greg Kroah-Hartman1-0/+825
The serial drivers are really just tty drivers, so move them to drivers/tty/ to make things a bit neater overall. This is part of the tty/serial driver movement proceedure as proposed by Arnd Bergmann and approved by everyone involved a number of months ago. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl> Cc: Michael H. Warfield <mhw@wittsend.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-03 21:41:37 +0300