summaryrefslogtreecommitdiff
path: root/drivers/thunderbolt/switch.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-04thunderbolt: Do not make DROM read success compulsoryMario Limonciello1-4/+2
The USB4 specification doesn't make any requirements that reading a device router's DROM is needed for the operation of the device. Other connection manager solutions don't necessarily read it or gate the usability of the device on whether it was read. So make failures when reading the DROM show warnings but not fail the initialization of the router. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-03-04thunderbolt: Do not resume routers if UID is not setMario Limonciello1-0/+4
Routers might not have a UID set if the DROM read failed during initialization previously. Normally upon resume the UID is re-read to confirm it's the same device connected. * If the DROM read failed during init but then succeeded during resume it could either be a new device or faulty device * If the DROM read failed during init and also failed during resume it might be a different device plugged in all together. Detect this situation and prevent re-using the same configuration in these cirucmstances. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-02thunderbolt: Add internal xHCI connect flows for Thunderbolt 3 devicesMika Westerberg1-1/+70
Both Alpine Ridge and Titan Ridge require special flows in order to activate the internal xHCI controller when there is USB device connected to the downstream type-C port. This implements the missing flows for both. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-12-28thunderbolt: Add module parameter for CLx disablingGil Fine1-0/+11
Add a module parameter that allows user to completely disable CLx functionality in case problems are found. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-12-28thunderbolt: Enable CL0s for Intel Titan RidgeGil Fine1-3/+157
Low power link states (called collectively CLx) are used to reduce transmitter and receiver power when a high-speed lane is idle. The simplest one being called CL0s. Follow what we already do for USB4 device routers and enable CL0s for Intel Titan Ridge device router too. This allows better thermal management. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-12-22thunderbolt: Implement TMU time disruption for Intel Titan RidgeGil Fine1-0/+4
Intel Titan Ridge based routers have slightly different flow for time disruption than USB4 compliant routers. This makes it work on Titan Ridge too. Needed to enable link low power states on Titan Ridge. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-12-22thunderbolt: Move usb4_switch_wait_for_bit() to switch.cGil Fine1-0/+34
Currently usb4_switch_wait_for_bit() used only in usb4.c Moving to switch.c to call it from other files. Also change the prefix to "tb_" to follow to the naming convention. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-12-22thunderbolt: Add CL0s support for USB4 routersGil Fine1-0/+263
In this patch we add enabling of CL0s - a low power state of the link. Low power states (called collectively CLx) are used to reduce transmitter and receiver power when a high-speed lane is idle. For now, we add support only for first low power state: CL0s. We enable it, if both sides of the link support it, and only for the first hop router. (i.e. the first device that connected to the host router). This is needed for better thermal management. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-12-07thunderbolt: Add debug logging of DisplayPort resource allocationMika Westerberg1-2/+15
Add more debugging around DP resource allocation/de-allocation. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-12-07thunderbolt: Do not program path HopIDs for USB4 routersMika Westerberg1-1/+6
These fields are marked read-only for USB4 routers so do not touch them in that case. Update the kernel-doc of tb_dp_port_set_hops() to reflect this too. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-12-07thunderbolt: Do not allow subtracting more NFC credits than configuredMika Westerberg1-0/+3
This might happen if the boot firmware uses different amount of NFC credits than what the router suggests, or we are dealing with pre-USB4 device. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-08-24Merge tag 'thunderbolt-for-v5.15-rc1' of ↵Greg Kroah-Hartman1-9/+19
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v5.15 merge window This includes following Thunderbolt/USB4 changes for the v5.15 merge window: * Include authorized value in the KOBJ_CHANGE event of a device router * A couple of improvements to get the driver working also with the AMD USB4 host controller. All these have been in linux-next with no reported issues. * tag 'thunderbolt-for-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Fix port linking by checking all adapters thunderbolt: Do not read control adapter config space thunderbolt: Handle ring interrupt by reading interrupt status register thunderbolt: Add vendor specific NHI quirk for auto-clearing interrupt status thunderbolt: Add authorized value to the KOBJ_CHANGE uevent
2021-08-09thunderbolt: Fix port linking by checking all adaptersSanjay R Mehta1-1/+1
In tb_switch_default_link_ports(), while linking of ports, only odd-numbered ports (1,3,5..) are considered and even-numbered ports are not considered. AMD host router has lane adapters at 2 and 3 and link ports at adapter 2 is not considered due to which lane bonding gets disabled. Hence added a fix such that all ports are considered during linking of ports. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-08-09thunderbolt: Do not read control adapter config spaceSanjay R Mehta1-5/+8
Adapter 0 is the control adapter and as per USB4 spec in section 2.2.6.2 control Adapters do not have an adapter configuration space. For this reason skip reading adapter config space in tb_port_init() when the port number is 0. This actually simplifies the rest of the function as we don't need to check for the port->port == 0 anymore. While there drop the extra empty line at the end of the function. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-08-02thunderbolt: Add authorized value to the KOBJ_CHANGE ueventRajat Jain1-3/+10
For security reasons, we would like to monitor and track when the Thunderbolt devices are authorized and deauthorized (i.e. when the Thunderbolt sysfs "authorized" attribute changes). Currently the userspace gets a udev change notification when there is a change, but the state may have changed (again) by the time we look at the authorized attribute in sysfs. So an authorization event may go unnoticed. Thus make it easier by informing the actual change (new value of authorized attribute) in the udev change notification. The change is included as a key value "authorized=<val>" where <val> is the new value of sysfs attribute "authorized", and is described at Documentation/ABI/testing/sysfs-bus-thunderbolt under /sys/bus/thunderbolt/devices/.../authorized. Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-07-27Revert "thunderbolt: Hide authorized attribute if router does not support ↵Mika Westerberg1-14/+1
PCIe tunnels" This reverts commit 6f3badead6a078cf3c71f381f9d84ac922984a00. It turns out bolt depends on having authorized attribute visible under each device. Hiding it makes bolt crash as several people have reported on various bug trackers. For this reason revert the commit. Link: https://gitlab.freedesktop.org/bolt/bolt/-/issues/174 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1979765 Link: https://bugs.archlinux.org/task/71569 Cc: stable@vger.kernel.org Cc: Christian Kellner <ckellner@redhat.com> Fixes: 6f3badead6a0 ("thunderbolt: Hide authorized attribute if router does not support PCIe tunnels") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20210727142501.27476-1-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-01thunderbolt: Allow router NVM authenticate separatelyMika Westerberg1-18/+32
It may be useful if the actual NVM authentication can be delayed to be run later, for instance when the user logs out. For this reason add a new NVM operation (AUHENTICATE_ONLY) that just triggers the authentication procedure over whatever was written to the NVM storage. This is not supported with Thunderbolt 1-3 devices, though. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-01thunderbolt: Move nvm_write_ops to tb.hRajmohan Mani1-5/+0
Currently these write ops are used for updating router firmware images only. Moving to tb.h helps the retimers also to use the same ops. Also add tb_ prefix to the enum while there. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-01thunderbolt: Add support for retimer NVM upgrade when there is no linkRajmohan Mani1-16/+32
With help from platform firmware (ACPI) it is possible to power on retimers even when there is no USB4 link (e.g nothing is connected to the USB4 ports). This allows us to bring the USB4 sideband up so that we can access retimers and upgrade their NVM firmware. If the platform has support for this, we expose two additional attributes under USB4 ports: offline and rescan. These can be used to bring the port offline, rescan for the retimers and put the port online again. The retimer NVM upgrade itself works the same way than with cable connected. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-01thunderbolt: Add USB4 port devicesMika Westerberg1-2/+15
Create devices for each USB4 port. This is needed when we add retimer access when there is no device connected but may be useful for other purposes too following what USB subsystem does. This exports a single attribute "link" that shows the type of the USB4 link (or "none" if there is no cable connected). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-01thunderbolt: Update port credits after bonding is enabled/disabledMika Westerberg1-0/+48
Once lane bonding has been enabled (or disabled) both lane adapters may update their total credits accordingly. For this reason re-read the port credits after lane bonding has been enabled or disabled. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-06-01thunderbolt: Read router preferred credit allocation informationMika Westerberg1-8/+43
USB4 routers must expose their preferred credit (buffer) allocation information through router operation. This information tells the connection manager how the router prefers its buffers to be allocated to get the expected bandwidth for the supported protocols. Read this information and store it as part of struct tb_switch for each USB4 router. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-06-01thunderbolt: Wait for the lanes to actually bondMika Westerberg1-2/+48
It may take some time until the two lanes enter bonded state so poll for the link width to match what is expected before going forward. This ensures the link is in expected state before we start establishing paths through it. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-06-01thunderbolt: Make tb_port_type() take const parameterMika Westerberg1-1/+1
The function does not modify the object in any way so make the parameter const to reflect this. No functional changes intended. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-05-31thunderbolt: Add wake from DisplayPortMika Westerberg1-1/+2
Latest USB4 spec added a new wake bit for DisplayPort so add this to the driver when runtime suspending. This way wake up the domain when a new monitor is plugged in to any of the device routers. Also do the same for pre-USB4 devices through the link controller registers as documented in chapter 13 of the USB4 spec. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-04-13Merge tag 'thunderbolt-for-v5.13-rc1' of ↵Greg Kroah-Hartman1-24/+51
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v5.13 merge window This includes following Thunderbolt/USB4 changes for v5.13 merge window: * Debugfs improvements * Align the inter-domain (peer-to-peer) support with the USB4 inter-domain spec for better interoperability * Add support for USB4 DROM and the new product descriptor * More KUnit tests * Detailed uevent for routers * Few miscellaneous improvements All these have been in linux-next without reported issues. * tag 'thunderbolt-for-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (24 commits) thunderbolt: Hide authorized attribute if router does not support PCIe tunnels thunderbolt: Add details to router uevent thunderbolt: Unlock on error path in tb_domain_add() thunderbolt: Add support for USB4 DROM thunderbolt: Check quirks in tb_switch_add() thunderbolt: Add KUnit tests for DMA tunnels thunderbolt: Add KUnit tests for XDomain properties net: thunderbolt: Align the driver to the USB4 networking spec thunderbolt: Allow multiple DMA tunnels over a single XDomain connection thunderbolt: Drop unused tb_port_set_initial_credits() thunderbolt: Use dedicated flow control for DMA tunnels thunderbolt: Add support for maxhopid XDomain property thunderbolt: Add tb_property_copy_dir() thunderbolt: Align XDomain protocol timeouts with the spec thunderbolt: Use pseudo-random number as initial property block generation thunderbolt: Do not re-establish XDomain DMA paths automatically thunderbolt: Add more logging to XDomain connections Documentation / thunderbolt: Drop speed/lanes entries for XDomain thunderbolt: Decrease control channel timeout for software connection manager thunderbolt: Do not pass timeout for tb_cfg_reset() ...
2021-04-09thunderbolt: Hide authorized attribute if router does not support PCIe tunnelsMika Westerberg1-1/+14
With USB4 devices PCIe tunneling is optional so for device routers without PCIe upstream adapter it does not make much sense to expose the authorized attribute. For this reason hide it if PCIe tunneling is not supported by the device router. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09thunderbolt: Add details to router ueventMika Westerberg1-0/+34
Expose two environment variables for routers as part of the initial uevent: USB4_VERSION=1.0 USB4_TYPE=host|device|hub Userspace can use this information to expose more details about each connected device. Only USB4 devices have USB4_VERSION but all devices have USB4_TYPE. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-18thunderbolt: Check quirks in tb_switch_add()Mika Westerberg1-0/+2
This makes it more visible on the main path of adding router. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-03-18thunderbolt: Drop unused tb_port_set_initial_credits()Mika Westerberg1-22/+0
This function is not used anymore in the driver so we can remove it. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-03-18thunderbolt: Do not pass timeout for tb_cfg_reset()Mika Westerberg1-1/+1
There is only one user for this function and it passes the default timeout to it anyway, so remove the parameter completely. This is also needed in the subsequent patch where we allow connection manager implementations to use different timeout for non-raw control channel messages. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-03-08thunderbolt: Initialize HopID IDAs in tb_switch_alloc()Mika Westerberg1-10/+8
If there is a failure before the tb_switch_add() is called the switch object is released by tb_switch_release() but at that point HopID IDAs have not yet been initialized. So we see splat like this: BUG: spinlock bad magic on CPU#2, kworker/u8:5/115 ... Workqueue: thunderbolt0 tb_handle_hotplug Call Trace: dump_stack+0x97/0xdc ? spin_bug+0x9a/0xa7 do_raw_spin_lock+0x68/0x98 _raw_spin_lock_irqsave+0x3f/0x5d ida_destroy+0x4f/0x127 tb_switch_release+0x6d/0xfd device_release+0x2c/0x7d kobject_put+0x9b/0xbc tb_handle_hotplug+0x278/0x452 process_one_work+0x1db/0x396 worker_thread+0x216/0x375 kthread+0x14d/0x155 ? pr_cont_work+0x58/0x58 ? kthread_blkcg+0x2e/0x2e ret_from_fork+0x1f/0x40 Fix this by always initializing HopID IDAs in tb_switch_alloc(). Fixes: 0b2863ac3cfd ("thunderbolt: Add functions for allocating and releasing HopIDs") Cc: stable@vger.kernel.org Reported-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-02-04thunderbolt: Add support for PCIe tunneling disabled (SL5)Mika Westerberg1-1/+5
Recent Intel Thunderbolt firmware connection manager has support for another security level, SL5, that disables PCIe tunneling. This option can be turned on from the BIOS. When this is set the driver exposes a new security level "nopcie" to the userspace and hides the authorized attribute under connected devices. While there we also hide it when "dponly" security level is enabled since it is not really usable in that case anyway. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
2021-02-04thunderbolt: switch: Fix kernel-doc descriptions of non-static functionsMika Westerberg1-0/+7
Fix kernel-doc descriptions of all non-static functions. This also gets rid of the warnings on W=1 build. Reported-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Lee Jones <lee.jones@linaro.org>
2021-01-28thunderbolt: switch: Fix function name in the headerLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/thunderbolt/switch.c:1322: warning: expecting prototype for reset_switch(). Prototype was for tb_switch_reset() instead Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-01-28thunderbolt: switch: Demote a bunch of non-conformant kernel-doc headersLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/thunderbolt/switch.c:730: warning: Function parameter or member 'port' not described in 'tb_init_port' drivers/thunderbolt/switch.c:1348: warning: Function parameter or member 'sw' not described in 'tb_plug_events_active' drivers/thunderbolt/switch.c:1348: warning: Function parameter or member 'active' not described in 'tb_plug_events_active' Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> [ mw: Demote only static functions ] Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-01-15thunderbolt: Add support for de-authorizing devicesMika Westerberg1-1/+33
In some cases it is useful to be able de-authorize devices. For example if user logs out the userspace can have a policy that disconnects PCIe devices until logged in again. This is only possible for software based connection manager as it directly controls the tunnels. For this reason make the authorized attribute accept writing 0 which makes the software connection manager to tear down the corresponding PCIe tunnel. Userspace can check if this is supported by reading a new domain attribute deauthorization, that holds 1 in that case. While there correct tb_domain_approve_switch() kernel-doc and description of authorized attribute to mention that it is only about PCIe tunnels. Cc: Christian Kellner <christian@kellner.me> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
2021-01-11thunderbolt: Start lane initialization after sleepMika Westerberg1-1/+26
USB4 spec says that for TBT3 compatible device routers the connection manager needs to set SLI (Start Lane Initialization) to get the lanes that were not connected back to functional state after sleep. Same needs to be done if the link was XDomain. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
2021-01-11thunderbolt: Constify static attribute_group structsRikard Falkeborn1-1/+1
The only usage of these is to put their addresses in arrays of pointers to const attribute_groups. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-30thunderbolt: Perform USB4 router NVM upgrade in two phasesMika Westerberg1-3/+17
The currect code expects that the router returns back the status of the NVM authentication immediately. When tested against a real USB4 device what happens is that the router is reset and only after that the result is updated in the ROUTER_CS_26 register status field. This also seems to align better what the spec suggests. For this reason do the same what we already do with the Thunderbolt 3 devices and perform the NVM upgrade in two phases. First start the NVM_AUTH router operation and once the router is added back after the reset read the status in ROUTER_CS_26 and expose it to the userspace accordingly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-11thunderbolt: Add functions for enabling and disabling lane bonding on XDomainIsaac Hazan1-3/+21
These can be used by service drivers to enable and disable lane bonding as needed. Signed-off-by: Isaac Hazan <isaac.hazan@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-11thunderbolt: Add link_speed and link_width to XDomainIsaac Hazan1-1/+8
Link speed and link width are needed for checking expected values in case of using a loopback service. Signed-off-by: Isaac Hazan <isaac.hazan@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-30Merge tag 'thunderbolt-for-v5.10-rc1' of ↵Greg Kroah-Hartman1-33/+183
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v5.10 merge window This includes following Thunderbolt/USB4 changes for v5.10 merge window: * A couple of optimizations around Tiger Lake force power logic and NHI (Native Host Interface) LC (Link Controller) mailbox command processing * Power management improvements for Software Connection Manager * Debugfs support * Allow KUnit tests to be enabled also when Thunderbolt driver is configured as module. * Few minor cleanups and fixes All these have been in linux-next with no reported issues. * tag 'thunderbolt-for-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (37 commits) thunderbolt: Capitalize comment on top of QUIRK_FORCE_POWER_LINK_CONTROLLER thunderbolt: Correct tb_check_quirks() kernel-doc thunderbolt: Log correct zeroX entries in decode_error() thunderbolt: Handle ERR_LOCK notification thunderbolt: Use "if USB4" instead of "depends on" in Kconfig thunderbolt: Allow KUnit tests to be built also when CONFIG_USB4=m thunderbolt: Only stop control channel when entering freeze thunderbolt: debugfs: Fix uninitialized return in counters_write() thunderbolt: Add debugfs interface thunderbolt: No need to warn in TB_CFG_ERROR_INVALID_CONFIG_SPACE thunderbolt: Introduce tb_switch_is_tiger_lake() thunderbolt: Introduce tb_switch_is_ice_lake() thunderbolt: Check for Intel vendor ID when identifying controller thunderbolt: Introduce tb_port_is_nhi() thunderbolt: Introduce tb_switch_next_cap() thunderbolt: Introduce tb_port_next_cap() thunderbolt: Move struct tb_cap_any to tb_regs.h thunderbolt: Add runtime PM for Software CM thunderbolt: Create device links from ACPI description ACPI: Export acpi_get_first_physical_node() to modules ...
2020-09-03thunderbolt: Add debugfs interfaceGil Fine1-0/+3
This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-03thunderbolt: Introduce tb_port_is_nhi()Mika Westerberg1-1/+1
This is useful if one needs to check if adapter (port) is the host interface (NHI). Make tb_port_alloc_hopid() take advantage of this. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-03thunderbolt: Add runtime PM for Software CMMika Westerberg1-4/+21
This adds runtime PM support for the Software Connection Manager parts of the driver. This allows to save power when either there is no device attached at all or there is a device attached and all following conditions are true: - Tunneled PCIe root/downstream ports are runtime suspended - Tunneled USB3 ports are runtime suspended - No active DisplayPort stream - No active XDomain connection For the first two we take advantage of device links that were added in previous patch. Difference for the system sleep case is that we also enable wakes when something is geting plugged in/out of the Thunderbolt ports. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-09-03thunderbolt: Enable wakes from system suspendMika Westerberg1-1/+29
In order for the router and the whole domain to wake up from system suspend states we need to enable wakes for the connected routers. For device routers we enable wakes from PCIe and USB 3.x. This allows devices such as keyboards connected to USB 3.x hub that is tunneled to wake the system up as expected. For all routers we enabled wake on USB4 for each connected ports. This is used to propagate the wake from router to another. Do the same for legacy routers through link controller vendor specific registers as documented in USB4 spec chapter 13. While there correct kernel-doc of usb4_switch_set_sleep() -- it does not enable wakes instead there is a separate function (usb4_switch_set_wake()) that does. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-09-03thunderbolt: Disable lane 1 for XDomain connectionMika Westerberg1-0/+44
USB4 spec mandates that the lane 1 should be disabled if lanes are not bonded. For host-to-host connections (XDomain) we don't support lane bonding so in order to be compatible with the spec, disable lane 1 when another host is connected. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-09-03thunderbolt: Set port configured for both ends of the linkMika Westerberg1-6/+27
Both ends of the link needs to have this set. Otherwise the link is not re-established properly after sleep. Now since it is possible to have mixed USB4 and Thunderbolt 1, 2 and 3 devices we need to split the link configuration functionality to happen per port so we can pick the correct implementation. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-09-03thunderbolt: Configure link after lane bonding is enabledMika Westerberg1-13/+42
During testing it was noticed that the link is not properly restored after the domain exits sleep if the link configured bits are set before lane bonding is enabled. The USB4 spec does not say in which order these need to be set but setting link configured afterwards makes the link restoration work so we do that instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 05:17:19 +0300