summaryrefslogtreecommitdiff
path: root/drivers/thermal/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2018-04-02thermal: Add cooling device's statistics in sysfsViresh Kumar1-0/+7
This extends the sysfs interface for thermal cooling devices and exposes some pretty useful statistics. These statistics have proven to be quite useful specially while doing benchmarks related to the task scheduler, where we want to make sure that nothing has disrupted the test, specially the cooling device which may have put constraints on the CPUs. The information exposed here tells us to what extent the CPUs were constrained by the thermal framework. The write-only "reset" file is used to reset the statistics. The read-only "time_in_state_ms" file shows the time (in msec) spent by the device in the respective cooling states, and it prints one line per cooling state. The read-only "total_trans" file shows single positive integer value showing the total number of cooling state transitions the device has gone through since the time the cooling device is registered or the time when statistics were reset last. The read-only "trans_table" file shows a two dimensional matrix, where an entry <i,j> (row i, column j) represents the number of transitions from State_i to State_j. This is how the directory structure looks like for a single cooling device: $ ls -R /sys/class/thermal/cooling_device0/ /sys/class/thermal/cooling_device0/: cur_state max_state power stats subsystem type uevent /sys/class/thermal/cooling_device0/power: autosuspend_delay_ms runtime_active_time runtime_suspended_time control runtime_status /sys/class/thermal/cooling_device0/stats: reset time_in_state_ms total_trans trans_table This is tested on ARM 64-bit Hisilicon hikey620 board running Ubuntu and ARM 64-bit Hisilicon hikey960 board running Android. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-01-02thermal: armada: Update Kconfig and module descriptionMiquel Raynal1-2/+2
Update Armada thermal driver Kconfig entry as well as the driver's MODULE_DESCRIPTION content, now that 64-bit SoCs are also supported, eg. Armada 7K and Armada 8K. Use the generic term "Marvell EBU Armada SoCs" instead of listing all the supported SoCs everywhere (excepted in the Kconfig description, where it is useful to have a list). Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-11-02Merge branch 'imx-nvmem' into thermal-socZhang Rui1-0/+1
2017-11-01thermal: add brcmstb AVS TMON driverBrian Norris1-1/+1
The AVS TMON core provides temperature readings, a pair of configurable high- and low-temperature threshold interrupts, and an emergency over-temperature chip reset. The driver utilizes the first two to provide temperature readings and high-temperature notifications to applications. The over-temperature reset is not exposed to applications; this reset threshold is critical to the system and should be set with care within the bootloader. Applications may choose to utilize the notification mechanism, the temperature reading mechanism (e.g., through polling), or both. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-11-01thermal: enable broadcom menu for arm64 bcm2835Allen Wild1-1/+1
Moving the bcm2835 thermal driver to the broadcom directory prevented it from getting enabled for arm64 builds, since the broadcom directory is only available when 32-bit specific ARCH_BCM is set. Fix this by enabling the Broadcom menu for ARCH_BCM or ARCH_BCM2835. Fixes: 6892cf07e733 ("thermal: bcm2835: move to the broadcom subdirectory") Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Allen Wild <allenwild93@gmail.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-10-18thermal: imx: add NVMEM dependencyArnd Bergmann1-0/+1
The driver now fails to link into vmlinux when CONFIG_NVMEM is a loadable module: drivers/thermal/imx_thermal.o: In function `imx_thermal_probe': imx_thermal.c:(.text+0x360): undefined reference to `nvmem_cell_read_u32' imx_thermal.c:(.text+0x360): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `nvmem_cell_read_u32' imx_thermal.c:(.text+0x388): undefined reference to `nvmem_cell_read_u32' imx_thermal.c:(.text+0x388): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `nvmem_cell_read_u32' This adds a Kconfig dependency to force it to be a module as well when its dependency is loadable. Fixes: 7fe5ba04fcdc ("thermal: imx: Add support for reading OCOTP through nvmem") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-09-08Merge branches 'thermal-core', 'thermal-soc', 'thermal-intel' and ↵Zhang Rui1-2/+10
'const-thermal-zone-structure' into next
2017-08-11thermal: uniphier: add UniPhier thermal driverKunihiko Hayashi1-0/+8
Add a thermal driver for on-chip PVT (Process, Voltage and Temperature) monitoring unit implemented on UniPhier SoCs. This driver supports temperature monitoring and alert function. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-08-08thermal: fix INTEL_SOC_DTS_IOSF_CORE dependenciesArnd Bergmann1-2/+2
We get a Kconfig warning when selecting this without also enabling CONFIG_PCI: warning: (X86_INTEL_LPSS && INTEL_SOC_DTS_IOSF_CORE && SND_SST_IPC_ACPI && MMC_SDHCI_ACPI && PUNIT_ATOM_DEBUG) selects IOSF_MBI which has unmet direct dependencies (PCI) This adds a new depedency. Fixes: 3a2419f865a6 ("Thermal: Intel SoC: DTS thermal use common APIs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-05-12Merge branch 'next' of ↵Linus Torvalds1-0/+32
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Fix a problem where orderly_shutdown() is called for multiple times due to multiple critical overheating events raised in a short period by platform thermal driver. (Keerthy) - Introduce a backup thermal shutdown mechanism, which invokes kernel_power_off()/emergency_restart() directly, after orderly_shutdown() being issued for certain amount of time(specified via Kconfig). This is useful in certain conditions that userspace may be unable to power off the system in a clean manner and leaves the system in a critical state, like in the middle of driver probing phase. (Keerthy) - Introduce a new interface in thermal devfreq_cooling code so that the driver can provide more precise data regarding actual power to the thermal governor every time the power budget is calculated. (Lukasz Luba) - Introduce BCM 2835 soc thermal driver and northstar thermal driver, within a new sub-folder. (Rafał Miłecki) - Introduce DA9062/61 thermal driver. (Steve Twiss) - Remove non-DT booting on TI-SoC driver. Also add support to fetching coefficients from DT. (Keerthy) - Refactorf RCAR Gen3 thermal driver. (Niklas Söderlund) - Small fix on MTK and intel-soc-dts thermal driver. (Dawei Chien, Brian Bian) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) thermal: core: Add a back up thermal shutdown mechanism thermal: core: Allow orderly_poweroff to be called only once Thermal: Intel SoC DTS: Change interrupt request behavior trace: thermal: add another parameter 'power' to the tracing function thermal: devfreq_cooling: add new interface for direct power read thermal: devfreq_cooling: refactor code and add get_voltage function thermal: mt8173: minor mtk_thermal.c cleanups thermal: bcm2835: move to the broadcom subdirectory thermal: broadcom: ns: specify myself as MODULE_AUTHOR thermal: da9062/61: Thermal junction temperature monitoring driver Documentation: devicetree: thermal: da9062/61 TJUNC temperature binding thermal: broadcom: add Northstar thermal driver dt-bindings: thermal: add support for Broadcom's Northstar thermal thermal: bcm2835: add thermal driver for bcm2835 SoC dt-bindings: Add thermal zone to bcm2835-thermal example thermal: rcar_gen3_thermal: add suspend and resume support thermal: rcar_gen3_thermal: store device match data in private structure thermal: rcar_gen3_thermal: enable hardware interrupts for trip points thermal: rcar_gen3_thermal: record and check number of TSCs found thermal: rcar_gen3_thermal: check that TSC exists before memory allocation ...
2017-05-06Merge branch 'thermal-soc' into nextZhang Rui1-0/+15
2017-05-05thermal: core: Add a back up thermal shutdown mechanismKeerthy1-0/+17
orderly_poweroff is triggered when a graceful shutdown of system is desired. This may be used in many critical states of the kernel such as when subsystems detects conditions such as critical temperature conditions. However, in certain conditions in system boot up sequences like those in the middle of driver probes being initiated, userspace will be unable to power off the system in a clean manner and leaves the system in a critical state. In cases like these, the /sbin/poweroff will return success (having forked off to attempt powering off the system. However, the system overall will fail to completely poweroff (since other modules will be probed) and the system is still functional with no userspace (since that would have shut itself off). However, there is no clean way of detecting such failure of userspace powering off the system. In such scenarios, it is necessary for a backup workqueue to be able to force a shutdown of the system when orderly shutdown is not successful after a configurable time period. Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-05-03Merge tag 'mfd-next-4.12' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Freescale MXS Low Resolution ADC - Freescale i.MX23/i.MX28 LRADC touchscreen - Motorola CPCAP Power Button - TI LMU (Lighting Management Unit) - Atmel SMC (Static Memory Controller) New Device Support: - Add support for X-Powers AXP803 to axp20x - Add support for Dialog Semi DA9061 to da9062-core - Add support for Intel Cougar Mountain to lpc_ich - Add support for Intel Gemini Lake to lpc_ich New Functionality: - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc - Add IRQ sense support; motorola-cpcap - Add ACPI support; cros_ec - Add Reset support; altera-a10sr - Add ADC support; axp20x - Add AC Power support; axp20x - Add Runtime PM support; atmel-ebi, exynos-lpass - Add Battery Power Supply support; axp20x - Add Clock support; exynos-lpass, hi655x-pmic Fix-ups: - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc - Add .remove() method; stm32-timers, exynos-lpass - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus - Rename variables for clarity; axp20x - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power - Improve formatting; arizona-core, axp20x - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb - Simplify/refactor code; arizona-core, atmel-ebi - Improve error checking; intel_soc_pmic_core Bug Fixes: - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power - Correct max-register value; stm32-timers - Extend timeout to account for clock stretching; cros_ec_spi - Use correct IRQ trigger type; motorola-cpcap - Fix bad use of IRQ sense register; motorola-cpcap - Logic error "||" should be "&&"; mxs-lradc-ts" * tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits) input: touchscreen: mxs-lradc: || vs && typos dt-bindings: Add AXP803's regulator info mfd: axp20x: Support AXP803 variant dt-bindings: Add device tree binding for X-Powers AXP803 PMIC dt-bindings: Make AXP20X compatible strings one per line mfd: intel_soc_pmic_core: Fix unchecked return value mfd: menelaus: Remove obsolete local_irq_disable() and local_irq_enable() mfd: omap-usb-tll: Configure ULPIAUTOIDLE mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode mfd: palmas: Fixed spelling mistake in error message mfd: lpc_ich: Add support for Intel Gemini Lake SoC mfd: hi655x: Add the clock cell to provide WiFi and Bluetooth mfd: intel_soc_pmic: Fix a mess with compilation units mfd: exynos-lpass: Add runtime PM support mfd: exynos-lpass: Add missing remove() function mfd: exynos-lpass: Add support for clocks mfd: exynos-lpass: Remove pad retention control iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs mfd: cpcap: Fix bad use of IRQ sense register mfd: cpcap: Use ack_invert interrupts ...
2017-04-27mfd: intel_soc_pmic: Fix a mess with compilation unitsAndy Shevchenko1-1/+1
Crystal Cove and Whiskey Cove are two different PMICs which are installed on Intel Atom SoC based platforms. Moreover there are two independent drivers that by some reason were supposed (*) to get into one kernel module. Fix the mess by clarifying Kconfig option for Crystal Cove and split Whiskey Cove out of it. (*) It looks like the configuration was never tested with INTEL_SOC_PMIC=n. The line in Makefile is actually wrong. Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> (supporter:ACPI) Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-23thermal: bcm2835: move to the broadcom subdirectoryRafał Miłecki1-8/+0
We already have 2 Broadcom drivers and at least 1 more is coming. This made us create broadcom subdirectory where bcm2835 should be moves now. Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-04-07thermal: da9062/61: Thermal junction temperature monitoring driverSteve Twiss1-0/+10
Add junction temperature monitoring supervisor device driver, compatible with the DA9062 and DA9061 PMICs. A MODULE_DEVICE_TABLE() macro is added. If the PMIC's internal junction temperature rises above T_WARN (125 degC) an interrupt is issued. This T_WARN level is defined as the THERMAL_TRIP_HOT trip-wire inside the device driver. The thermal triggering mechanism is interrupt based and happens when the temperature rises above a given threshold level. The component cannot return an exact temperature, it only has knowledge if the temperature is above or below a given threshold value. A status bit must be polled to detect when the temperature falls below that threshold level again. A kernel work queue is configured to repeatedly poll and detect when the temperature falls below this trip-wire, between 1 and 10 second intervals (defaulting at 3 seconds). This scheme is provided as an example. It would be expected that any final implementation will also include a notify() function and any of these settings could be altered to match the application where appropriate. When over-temperature is reached, the interrupt from the DA9061/2 will be repeatedly triggered. The IRQ is therefore disabled when the first over-temperature event happens and the status bit is polled using a work-queue until it becomes false. This strategy is designed to allow the periodic transmission of uevents (HOT trip point) as the first level of temperature supervision method. It is intended for non-invasive temperature control, where the necessary measures for cooling the system down are left to the host software. Once the temperature falls again, the IRQ is re-enabled so a new critical over-temperature event can be detected. Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-04-07thermal: broadcom: add Northstar thermal driverRafał Miłecki1-0/+5
Northstar is a SoC family commonly used in home routers. This commit adds a driver for checking CPU temperature. As Northstar Plus seems to also have this IP block this new symbol gets ARCH_BCM_IPROC dependency. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-04-01thermal: bcm2835: add thermal driver for bcm2835 SoCStefan Wahren1-0/+8
Add basic thermal driver for bcm2835 SoC. This driver currently make sure that tsense HW block is set up correctly. Tested-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-03-16cpufreq: dbx500: Manage cooling device from cpufreq driverViresh Kumar1-12/+0
The best place to register the CPU cooling device is from the cpufreq driver as we would know if all the resources are already available or not. That's what is done for the cpufreq-dt.c driver as well. The cpu-cooling driver for dbx500 platform was just (un)registering with the thermal framework and that can be handled easily by the cpufreq driver as well and in proper sequence as well. Get rid of the cooling driver and its its users and manage everything from the cpufreq driver instead. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-19thermal: zx2967: add thermal driver for ZTE's zx2967 familyBaoyou Xie1-0/+8
This patch adds thermal driver for ZTE's zx2967 family. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-01-20thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driverWolfram Sang1-0/+9
Add support for R-Car Gen3 thermal sensors. Polling only for now, interrupts will be added incrementally. Same goes for reading fuses. This is documented already, but no hardware available for now. Signed-off-by: Hien Dang <hien.dang.eb@renesas.com> Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> [Niklas: document and rework temperature calculation] Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-11-23thermal: hisilicon: fix for dependencyLeo Yan1-1/+3
The thermal driver is standalone driver which is used to enable thermal sensors, so it can be used with any cooling device and should not bind with CPU cooling device driver. This original patch is suggested by Amit Kucheria; so it's to polish the dependency in Kconfig, and remove the dependency with CPU_THERMAL. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-09-27Merge branches 'thermal-soc', 'thermal-core', 'thermal-intel' and ↵Zhang Rui1-0/+10
'thermal-tegra-hw-throttle' into next
2016-09-27thermal: max77620: Add thermal driver for reporting junction tempLaxman Dewangan1-0/+10
Maxim Semiconductor Max77620 supports alarm interrupts when its die temperature crosses 120C and 140C. These threshold temperatures are not configurable. Add thermal driver to register PMIC die temperature as thermal zone sensor and capture the die temperature warning interrupts to notifying the client. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: imx: depend on imx SoC archPeter Robinson1-1/+1
Not much use unless the SoC is selected so depend on the ARCH_MXC and COMPILE_TEST like all the other thermal drivers. v2: drop extraneous OF Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qoriq: Add thermal management supportJia Hongtao1-0/+10
This driver add thermal management support by enabling TMU (Thermal Monitoring Unit) on QorIQ platform. It's based on thermal of framework: - Trip points defined in device tree. - Cpufreq as cooling device registered in qoriq cpufreq driver. Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: tsens: Add a skeletal TSENS driversRajendra Nayak1-0/+5
TSENS is Qualcomms' thermal temperature sensor device. It supports reading temperatures from multiple thermal sensors present on various QCOM SoCs. Calibration data is generally read from a non-volatile memory (eeprom) device. Add a skeleton driver with all the necessary abstractions so a variety of qcom device families which support TSENS can add driver extensions. Also add the required device tree bindings which can be used to describe the TSENS device in DT. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-06thermal: add Intel BXT WhiskeyCove PMIC thermal driverBin Gao1-0/+10
This change adds support for Intel BXT Whiskey Cove PMIC thermal driver which is intended to handle the alert interrupts triggered upon thermal trip point cross and notify the thermal framework appropriately with the zone, temp, crossed trip and event details. Signed-off-by: Yegnesh S Iyer <yegnesh.s.iyer@intel.com> Signed-off-by: Bin Gao <bin.gao@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-05-26Merge branch 'next' of ↵Linus Torvalds1-10/+21
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Introduce generic ADC thermal driver, based on OF thermal (Laxman Dewangan) - Introduce new thermal driver for Tango chips (Marc Gonzalez) - Rockchip driver support for RK3399, RK3366, and some fixes (Caesar Wang, Elaine Zhang and Shawn Lin) - Add CPU power cooling model to Mediatek thermal driver (Dawei Chien) - Wider usage of dev_thermal_zone_of_sensor_register (Eduardo Valentin) - TI thermal driver gained a new maintainer (Keerthy). - Enabled powerclamp driver by checking CPU feature and package cstate counter instead of CPU whitelist (Jacob Pan) - Various fixes on thermal governor, OF thermal, Tegra, and RCAR * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (50 commits) thermal: tango: initialize TEMPSI_CFG thermal: rockchip: use the usleep_range instead of udelay thermal: rockchip: add the notes for better reading thermal: rockchip: Support RK3366 SoCs in the thermal driver thermal: rockchip: handle the power sequence for tsadc controller thermal: rockchip: update the tsadc table for rk3399 thermal: rockchip: fixes the code_to_temp for tsadc driver thermal: rockchip: disable thermal->clk in err case thermal: tegra: add Tegra132 specific SOC_THERM driver thermal: fix ptr_ret.cocci warnings thermal: mediatek: Add cpu dynamic power cooling model. thermal: generic-adc: Add ADC based thermal sensor driver thermal: generic-adc: Add DT binding for ADC based thermal sensor thermal: tegra: fix static checker warning thermal: tegra: mark PM functions __maybe_unused thermal: add temperature sensor support for tango SoC thermal: hisilicon: fix IRQ imbalance enabling thermal: hisilicon: support to use any sensor thermal: rcar: Remove binding docs for r8a7794 thermal: tegra: add PM support ...
2016-05-17thermal: generic-adc: Add ADC based thermal sensor driverLaxman Dewangan1-0/+10
In some of platform, thermal sensors like NCT thermistors are connected to the one of ADC channel. The temperature is read by reading the voltage across the sensor resistance via ADC. Lookup table for ADC read value to temperature is referred to get temperature. ADC is read via IIO framework. Add support for thermal sensor driver which read the voltage across sensor resistance from ADC through IIO framework. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: add temperature sensor support for tango SoCMarc Gonzalez1-0/+9
The Tango thermal driver provides support for the primitive temperature sensor embedded in Tango chips since the SMP8758. This sensor only generates a 1-bit signal to indicate whether the die temperature exceeds a programmable threshold. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: move tegra thermal files into tegra directoryWei Ni1-10/+2
Move Tegra soctherm driver to tegra directory, it's easy to maintain and add more new function support for Tegra platforms. This will also help to split soctherm driver into common parts and chip specific data related parts. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-11Thermal / ACPI / video: add INT3406 thermal driverAaron Lu1-25/+3
INT3406 ACPI device object resembles an ACPI video output device, but its _BCM is said to be deprecated and should not be used. So we will make use of the raw interface to do the actual cooling. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-21thermal: fix Mediatek thermal controller buildJohannes Berg1-0/+1
At least with CONFIG_COMPILE_TEST, there's no reason to assume that CONFIG_RESET_CONTROLLER is set, but the code for this controller requires it since it calls device_reset(). Make CONFIG_MTK_THERMAL properly depend on CONFIG_RESET_CONTROLLER. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-21thermal: fix mtk_thermal build dependencyRandy Dunlap1-0/+1
Fix build errors when MTK_THERMAL=y and NVMEM=m by preventing that Kconfig combination. drivers/built-in.o: In function `mtk_thermal_probe': mtk_thermal.c:(.text+0xffa8f): undefined reference to `nvmem_cell_get' mtk_thermal.c:(.text+0xffabe): undefined reference to `nvmem_cell_read' mtk_thermal.c:(.text+0xffac9): undefined reference to `nvmem_cell_put' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: <linux-pm@vger.kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Hanyi Wu <hanyi.wu@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-15Merge branch 'linus' of ↵Zhang Rui1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
2016-03-09thermal: mtk: allow compile testing on UMEduardo Valentin1-0/+1
Following the fix on thermal Kconfig, this patch adds dependency on HAS_IOMEM so driver properly compile test on UM arch. Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-08thermal: Fix build error of missing devm_ioremap_resource on UMKrzysztof Kozlowski1-0/+8
The devres.o gets linked if HAS_IOMEM is present so on ARCH=um allyesconfig (COMPILE_TEST) failed on many files with: drivers/built-in.o: In function `kirkwood_thermal_probe': kirkwood_thermal.c:(.text+0x390a25): undefined reference to `devm_ioremap_resource' drivers/built-in.o: In function `exynos_tmu_probe': exynos_tmu.c:(.text+0x39246b): undefined reference to `devm_ioremap' The users of devm_ioremap_resource() which are compile-testable should depend on HAS_IOMEM. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-08thermal: rcar: Use ARCH_RENESASSimon Horman1-1/+1
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-08thermal: db8500_cpufreq_cooling: Compile with COMPILE_TESTLuis de Bethencourt1-1/+1
This driver only has runtime but no build time dependencies, so it can be built for testing purposes if the Kconfig COMPILE_TEST option is enabled. This is useful to have more build coverage and make sure that drivers are not affected by changes that could cause build regressions. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-18thermal: Add Mediatek thermal controller supportSascha Hauer1-0/+8
This adds support for the Mediatek thermal controller found on MT8173 and likely other SoCs. The controller is a bit special. It does not have its own ADC, instead it controls the on-SoC AUXADC via AHB bus accesses. For this reason we need the physical address of the AUXADC. Also it controls a mux using AHB bus accesses, so we need the APMIXEDSYS physical address aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-10thermal: allow u8500-thermal driver to be a moduleArnd Bergmann1-2/+2
When the thermal subsystem is a loadable module, the u8500 driver fails to build: drivers/thermal/built-in.o: In function `db8500_thermal_probe': db8500_thermal.c:(.text+0x96c): undefined reference to `thermal_zone_device_register' drivers/thermal/built-in.o: In function `db8500_thermal_work': db8500_thermal.c:(.text+0xab4): undefined reference to `thermal_zone_device_update' This changes the symbol to a tristate, so Kconfig can track the dependency correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-10thermal: allow spear-thermal driver to be a moduleArnd Bergmann1-1/+1
When the thermal subsystem is a loadable module, the spear driver fails to build: drivers/thermal/built-in.o: In function `spear_thermal_exit': spear_thermal.c:(.text+0xf8): undefined reference to `thermal_zone_device_unregister' drivers/thermal/built-in.o: In function `spear_thermal_probe': spear_thermal.c:(.text+0x230): undefined reference to `thermal_zone_device_register' This changes the symbol to a tristate, so Kconfig can track the dependency correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-24Revert "thermal: qcom_spmi: allow compile test"Arnd Bergmann1-1/+1
This just caused build errors: warning: (QCOM_SPMI_TEMP_ALARM) selects REGMAP_SPMI which has unmet direct dependencies (SPMI) drivers/built-in.o: In function `regmap_spmi_ext_gather_write': :(.text+0x609b0): undefined reference to `spmi_ext_register_write' :(.text+0x609f0): undefined reference to `spmi_ext_register_writel' While it's generally a good idea to allow compile testing, in this case, it just doesn't work, so reverting the patch that introduced the compile-test variant seems the most appropriate solution. Note that SPMI also has a 'depends on ARCH_QCOM || COMPILE_TEST' statement, so we should be able to enable SPMI on all architectures for compile testing already. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cb7fb4d34202 ("thermal: qcom_spmi: allow compile test") Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-06Merge branches 'thermal-core', 'thermal-intel' and 'thermal-soc' into nextZhang Rui1-0/+17
2015-10-30thermal: Add devfreq coolingØrjan Eide1-0/+14
Add a generic thermal cooling device for devfreq, that is similar to cpu_cooling. The device must use devfreq. In order to use the power extension of the cooling device, it must have registered its OPPs using the OPP library. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Ørjan Eide <orjan.eide@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-10-10thermal: kconfig: select THERMAL_WRITABLE_TRIPS for x86 thermalSrinivas Pandruvada1-0/+3
After the commit "thermal: core: Add Kconfig option to enable writable trips", by default the trips are read only. This cause user space thermal controllers to poll for temperature as they can't set temperature thresholds for getting a notification via uevents. These programs use RW trip in a zone to register thresholds. Since we need to enable the new config introduced by above commit to allow writable trips, selecting CONFIG_THERMAL_WRITABLE_TRIP for x86 thermal drivers. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2015-09-14thermal: ti-soc: Kconfig fix to avoid menu showing wronglyEduardo Valentin1-0/+1
Move the dependencies to menu, so we avoid showing it wrongly. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-14thermal: qcom_spmi: allow compile testEduardo Valentin1-1/+1
Adding COMPILE_TEST flag to qcom_spmi driver to facilitate maintenance. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-14thermal: exynos: allow compile testEduardo Valentin1-1/+1
Adding COMPILE_TEST flag to exynos driver to facilitate maintenance. Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>