summaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)AuthorFilesLines
2015-03-20target: do not reject FUA CDBs when write cache is enabled but ↵Christophe Vu-Brugier3-18/+16
emulate_write_cache is 0 A check that rejects a CDB with FUA bit set if no write cache is emulated was added by the following commit: fde9f50 target: Add sanity checks for DPO/FUA bit usage The condition is as follows: if (!dev->dev_attrib.emulate_fua_write || !dev->dev_attrib.emulate_write_cache) However, this check is wrong if the backend device supports WCE but "emulate_write_cache" is disabled. This patch uses se_dev_check_wce() (previously named spc_check_dev_wce) to invoke transport->get_write_cache() if the device has a write cache or check the "emulate_write_cache" attribute otherwise. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-20target: Fix virtual LUN=0 target_configure_device failure OOPsNicholas Bellinger1-2/+2
This patch fixes a NULL pointer dereference triggered by a late target_configure_device() -> alloc_workqueue() failure that results in target_free_device() being called with DF_CONFIGURED already set, which subsequently OOPses in destroy_workqueue() code. Currently this only happens at modprobe target_core_mod time when core_dev_setup_virtual_lun0() -> target_configure_device() fails, and the explicit target_free_device() gets called. To address this bug originally introduced by commit 0fd97ccf45, go ahead and move DF_CONFIGURED to end of target_configure_device() code to handle this special failure case. Reported-by: Claudio Fleiner <cmf@daterainc.com> Cc: Claudio Fleiner <cmf@daterainc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> # v3.7+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-20target/pscsi: Fix NULL pointer dereference in get_device_typeNicholas Bellinger1-1/+1
This patch fixes a NULL pointer dereference OOPs with pSCSI backends within target_core_stat.c code. The bug is caused by a configfs attr read if no pscsi_dev_virt->pdv_sd has been configured. Reported-by: Olaf Hering <olaf@aepfle.de> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-20tcm_fc: missing curly braces in ft_invl_hw_context()Dan Carpenter1-1/+2
This patch adds a missing set of conditional check braces in ft_invl_hw_context() originally introduced by commit dcd998ccd when handling DDP failures in ft_recv_write_data() code. commit dcd998ccdbf74a7d8fe0f0a44e85da1ed5975946 Author: Kiran Patil <kiran.patil@intel.com> Date: Wed Aug 3 09:20:01 2011 +0000 tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Kiran Patil <kiran.patil@intel.com> Cc: <stable@vger.kernel.org> # 3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-20target: Fix reference leak in target_get_sess_cmd() error pathBart Van Assche1-0/+4
This patch fixes a se_cmd->cmd_kref leak buf when se_sess->sess_tearing_down is true within target_get_sess_cmd() submission path code. This se_cmd reference leak can occur during active session shutdown when ack_kref=1 is passed by target_submit_cmd_[map_sgls,tmr]() callers. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: <stable@vger.kernel.org> # 3.6+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-20loop/usb/vhost-scsi/xen-scsiback: Fix use of __transport_register_sessionBart Van Assche1-5/+2
This patch changes loopback, usb-gadget, vhost-scsi and xen-scsiback fabric code to invoke transport_register_session() instead of the unprotected flavour, to ensure se_tpg->session_lock is taken when adding new session list nodes to se_tpg->tpg_sess_list. Note that since these four fabric drivers already hold their own internal TPG mutexes when accessing se_tpg->tpg_sess_list, and consist of a single se_session created through configfs attribute access, no list corruption can currently occur. So for correctness sake, go ahead and use the se_tpg->session_lock protected version for these four fabric drivers. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-20iscsi-target: Avoid early conn_logout_comp for iser connectionsNicholas Bellinger1-4/+10
This patch fixes a iser specific logout bug where early complete() of conn->conn_logout_comp in iscsit_close_connection() was causing isert_wait4logout() to complete too soon, triggering a use after free NULL pointer dereference of iscsi_conn memory. The complete() was originally added for traditional iscsi-target when a ISCSI_LOGOUT_OP failed in iscsi_target_rx_opcode(), but given iser-target does not wait in logout failure, this special case needs to be avoided. Reported-by: Sagi Grimberg <sagig@mellanox.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Slava Shwartsman <valyushash@gmail.com> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-20Revert "iscsi-target: Avoid IN_LOGOUT failure case for iser-target"Nicholas Bellinger1-3/+1
This reverts commit 72859d91d93319c00a18c29f577e56bf73a8654a. The original patch was wrong, iscsit_close_connection() still needs to release iscsi_conn during both normal + exception IN_LOGOUT status with ib_isert enabled. The original OOPs is due to completing conn_logout_comp early within iscsit_close_connection(), causing isert_wait4logout() to complete instead of waiting for iscsit_logout_post_handler_*() to be called. Reported-by: Sagi Grimberg <sagig@mellanox.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Slava Shwartsman <valyushash@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-20target: Disallow changing of WRITE cache/FUA attrs after exportNicholas Bellinger1-1/+15
Now that incoming FUA=1 bit check is enforced for backends with FUA or WCE disabled, go ahead and disallow the changing of related backend attributes when active fabric exports exist. This is required to avoid potential failures with existing initiator LUN registrations that have been previously created with FUA=1. Reported-by: Christoph Hellwig <hch@lst.de> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-22Merge branch 'for-next' of ↵Linus Torvalds26-1086/+239
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Update vhost-scsi to support F_ANY_LAYOUT using mm/iov_iter.c logic, and signal VERSION_1 support (MST + Viro + nab) - Fix iscsi/iser-target to remove problematic active_ts_set usage (Gavin Guo) - Update iscsi/iser-target to support multi-sequence sendtargets (Sagi) - Fix original PR_APTPL_BUF_LEN 8k size limitation (Martin Svec) - Add missing WRITE_SAME end-of-device sanity check (Bart) - Check for LBA + sectors wrap-around in sbc_parse_cdb() (nab) - Other various minor SPC/SBC compliance fixes based upon Ronnie Sahlberg test suite (nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (32 commits) target: Set LBPWS10 bit in Logical Block Provisioning EVPD target: Fail UNMAP when emulate_tpu=0 target: Fail WRITE_SAME w/ UNMAP=1 when emulate_tpws=0 target: Add sanity checks for DPO/FUA bit usage target: Perform PROTECT sanity checks for WRITE_SAME target: Fail I/O with PROTECT bit when protection is unsupported target: Check for LBA + sectors wrap-around in sbc_parse_cdb target: Add missing WRITE_SAME end-of-device sanity check iscsi-target: Avoid IN_LOGOUT failure case for iser-target target: Fix PR_APTPL_BUF_LEN buffer size limitation iscsi-target: Drop problematic active_ts_list usage iscsi/iser-target: Support multi-sequence sendtargets text response iser-target: Remove duplicate function names vhost/scsi: potential memory corruption vhost/scsi: Global tcm_vhost -> vhost_scsi rename vhost/scsi: Drop left-over scsi_tcq.h include vhost/scsi: Set VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits vhost/scsi: Add ANY_LAYOUT support in vhost_scsi_handle_vq vhost/scsi: Add ANY_LAYOUT iov -> sgl mapping prerequisites vhost/scsi: Change vhost_scsi_map_to_sgl to accept iov ptr + len ...
2015-02-14target: Set LBPWS10 bit in Logical Block Provisioning EVPDNicholas Bellinger1-1/+1
This patch sets the missing LBPWS10 bit within spc_emulate_evpd_b2() in order to signal WRITE_SAME (10) w/ UNMAP support, following the existing LBPWS bit to signal WRITE_SAME (16) w/ UNMAP support. Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-14target: Fail UNMAP when emulate_tpu=0Nicholas Bellinger1-0/+5
This patch adds a check within sbc_parse_cdb() to fail a UNMAP op, if the backend device has emulate_tpu disabled. Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-14target: Fail WRITE_SAME w/ UNMAP=1 when emulate_tpws=0Nicholas Bellinger1-0/+5
This patch adds a check within sbc_setup_write_same() to fail a WRITE_SAME w/ UNMAP=1 op, if the backend device has emulate_tpws disabled. Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-14target: Add sanity checks for DPO/FUA bit usageNicholas Bellinger1-10/+46
This patch adds a sbc_check_dpofua() function that performs sanity checks for DPO/FUA command bits. It introduces checks to fail when either bit is set, but the backend device is not advertising support for them. It also moves the existing cmd->se_cmd_flags |= SCF_FUA assignement into the new helper function. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-14target: Perform PROTECT sanity checks for WRITE_SAMENicholas Bellinger3-0/+18
This patch adds a call to sbc_check_prot() within sbc_setup_write_same() code to perform the various protection releated sanity checks, including failing if WRPROTECT or RDPROTECT is set for a backend device that has not advertised support for T10-PI. Also, since WRITE_SAME + T10-PI is currently not supported by IBLOCK + FILEIO backends, go ahead and fail if ->execute_write_same() is invoked with a non zero cmd->prot_op. Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-14target: Fail I/O with PROTECT bit when protection is unsupportedNicholas Bellinger1-19/+32
This patch adds an explicit check for WRPROTECT + RDPROTECT bit usage within sbc_check_prot(), and fails with TCM_INVALID_CDB_FIELD if the backend device does not have protection enabled. Also, update sbc_check_prot() to return sense_reason_t in order to propigate up the correct sense ASQ. Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-14target: Check for LBA + sectors wrap-around in sbc_parse_cdbNicholas Bellinger1-1/+2
This patch adds a check to sbc_parse_cdb() in order to detect when an LBA + sector vs. end-of-device calculation wraps when the LBA is sufficently large enough (eg: 0xFFFFFFFFFFFFFFFF). Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-14target: Add missing WRITE_SAME end-of-device sanity checkNicholas Bellinger1-0/+12
This patch adds a check to sbc_setup_write_same() to verify the incoming WRITE_SAME LBA + number of blocks does not exceed past the end-of-device. Also check for potential LBA wrap-around as well. Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org # 3.8+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-12iscsi-target: Avoid IN_LOGOUT failure case for iser-targetNicholas Bellinger1-1/+3
This patch addresses a bug reported during iser-target login/logout stress testing, where iscsit_take_action_for_connection_exit() is incorrectly invoking iscsit_close_connection() twice during IN_LOGOUT state, after connection shutdown has already been initiated by iser-target code. Here is the backtrace: BUG: unable to handle kernel NULL pointer dereference at 00000000000001f0 IP: [<ffffffffa033d992>] iscsit_take_action_for_connection_exit+0x62/0x110 [iscsi_target_mod] PGD 0 Oops: 0000 [#1] SMP Modules linked in: target_core_pscsi(O) target_core_file(O) target_core_iblock(O) ib_isert(O) iscsi_target_mod(O) ib_srpt(O) tcm_loop(O) tcm_fc(O) target_core_mod(O) mst_pciconf(OE) bonding mlx5_ib(O) mlx5_core libfc scsi_transport_fc netconsole configfs nfsv3 nfs_acl mlx4_ib(O) rdma_ucm(O) ib_ucm(O) rdma_cm(O) iw_cm(O) ib_uverbs(O) libiscsi_tcp libiscsi scsi_transport_iscsi mlx4_en mlx4_core ib_ipoib(O) ib_cm(O) ib_sa(O) ib_umad(O) ib_mad(O) ib_core(O) ib_addr(O) rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs fscache lockd grace autofs4 sunrpc 8021q garp stp llc ipv6 dm_mirror dm_region_hash dm_log dm_multipath uinput ipmi_si ipmi_msghandler acpi_pad iTCO_wdt iTCO_vendor_support dcdbas microcode pcspkr wmi sb_edac edac_core sg lpc_ich mfd_core shpchp tg3 ptp pps_core dm_mod ext3(E) jbd(E) mbcache(E) sr_mod(E) cdrom(E) sd_mod(E) ahci(E) libahci(E) megaraid_sas(E) [last unloaded: target_core_mod] CPU: 2 PID: 5280 Comm: iscsi_ttx Tainted: G W OE 3.18.0-rc2+ #22 Hardware name: Dell Inc. PowerEdge R720/0VWT90, BIOS 2.0.9 03/08/2013 task: ffff8806132f9010 ti: ffff880601d6c000 task.ti: ffff880601d6c000 RIP: 0010:[<ffffffffa033d992>] [<ffffffffa033d992>] iscsit_take_action_for_connection_exit+0x62/0x110 [iscsi_target_mod] RSP: 0018:ffff880601d6fe18 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffff8805dc437800 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000200 RDI: ffffffffa033d98b RBP: ffff880601d6fe28 R08: 0000000000000000 R09: 000000000000dd37 R10: 00000000ec5d4202 R11: 0000000000000001 R12: ffff8805dc437bf4 R13: ffff88061b831600 R14: ffff880601d6fe58 R15: ffff8806132f9010 FS: 0000000000000000(0000) GS:ffff88032fa20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000001f0 CR3: 0000000001a14000 CR4: 00000000000407e0 Stack: ffff8805dc437800 fffffffffffffe00 ffff880601d6feb8 ffffffffa034ed40 ffff8806132f9010 ffff880601d6fe70 0f00000000000000 ffff8805d51fbef0 0000000000000000 ffff8806132f9010 ffffffff8108e7f0 ffff880601d6fe70 Call Trace: [<ffffffffa034ed40>] iscsi_target_tx_thread+0x160/0x220 [iscsi_target_mod] [<ffffffff8108e7f0>] ? bit_waitqueue+0xb0/0xb0 [<ffffffffa034ebe0>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod] [<ffffffff8107017e>] kthread+0xce/0xf0 [<ffffffff810700b0>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff815a0b6c>] ret_from_fork+0x7c/0xb0 [<ffffffff810700b0>] ? kthread_freezable_should_stop+0x70/0x70 Code: 06 0f 84 82 00 00 00 3c 08 74 4e f6 05 39 e6 02 00 04 0f 85 9e 00 00 00 c6 43 19 08 4c 89 e7 e8 65 2a 26 e1 48 8b 83 a0 04 00 00 <48> 8b 88 f0 01 00 00 80 b9 d8 04 00 00 02 74 2e f6 05 31 e6 02 RIP [<ffffffffa033d992>] iscsit_take_action_for_connection_exit+0x62/0x110 [iscsi_target_mod] RSP <ffff880601d6fe18> CR2: 00000000000001f0 ---[ end trace a0c33436cd0836b4 ]--- This special case is still required by ISCSI_TCP transport during a iscsit_handle_logout_cmd() failure case in iscsi_target_rx_opcode(), but must be avoided for iser-target. Reported-by: Sagi Grimberg <sagig@mellanox.com> Reported-by: Slava Shwartsman <valyushash@gmail.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Slava Shwartsman <valyushash@gmail.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-12target: Fix PR_APTPL_BUF_LEN buffer size limitationNicholas Bellinger1-12/+13
This patch addresses the original PR_APTPL_BUF_LEN = 8k limitiation for write-out of PR APTPL metadata that Martin has recently been running into. It changes core_scsi3_update_and_write_aptpl() to use vzalloc'ed memory instead of kzalloc, and increases the default hardcoded length to 256k. It also adds logic in core_scsi3_update_and_write_aptpl() to double the original length upon core_scsi3_update_aptpl_buf() failure, and retries until the vzalloc'ed buffer is large enough to accommodate the outgoing APTPL metadata. Reported-by: Martin Svec <martin.svec@zoner.cz> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-12iscsi-target: Drop problematic active_ts_list usageNicholas Bellinger1-23/+5
This patch drops legacy active_ts_list usage within iscsi_target_tq.c code. It was originally used to track the active thread sets during iscsi-target shutdown, and is no longer used by modern upstream code. Two people have reported list corruption using traditional iscsi-target and iser-target with the following backtrace, that appears to be related to iscsi_thread_set->ts_list being used across both active_ts_list and inactive_ts_list. [ 60.782534] ------------[ cut here ]------------ [ 60.782543] WARNING: CPU: 0 PID: 9430 at lib/list_debug.c:53 __list_del_entry+0x63/0xd0() [ 60.782545] list_del corruption, ffff88045b00d180->next is LIST_POISON1 (dead000000100100) [ 60.782546] Modules linked in: ib_srpt tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc scsi_tgt ib_isert rdma_cm iw_cm ib_addr iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc autofs4 sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ib_ipoib ib_cm ib_uverbs ib_umad mlx4_en mlx4_ib ib_sa ib_mad ib_core mlx4_core dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan vhost tun kvm_intel kvm uinput iTCO_wdt iTCO_vendor_support microcode serio_raw pcspkr sb_edac edac_core sg i2c_i801 lpc_ich mfd_core mtip32xx igb i2c_algo_bit i2c_core ptp pps_core ioatdma dca wmi ext3(F) jbd(F) mbcache(F) sd_mod(F) crc_t10dif(F) crct10dif_common(F) ahci(F) libahci(F) isci(F) libsas(F) scsi_transport_sas(F) [last unloaded: speedstep_lib] [ 60.782597] CPU: 0 PID: 9430 Comm: iscsi_ttx Tainted: GF 3.12.19+ #2 [ 60.782598] Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013 [ 60.782599] 0000000000000035 ffff88044de31d08 ffffffff81553ae7 0000000000000035 [ 60.782602] ffff88044de31d58 ffff88044de31d48 ffffffff8104d1cc 0000000000000002 [ 60.782605] ffff88045b00d180 ffff88045b00d0c0 ffff88045b00d0c0 ffff88044de31e58 [ 60.782607] Call Trace: [ 60.782611] [<ffffffff81553ae7>] dump_stack+0x49/0x62 [ 60.782615] [<ffffffff8104d1cc>] warn_slowpath_common+0x8c/0xc0 [ 60.782618] [<ffffffff8104d2b6>] warn_slowpath_fmt+0x46/0x50 [ 60.782620] [<ffffffff81280933>] __list_del_entry+0x63/0xd0 [ 60.782622] [<ffffffff812809b1>] list_del+0x11/0x40 [ 60.782630] [<ffffffffa06e7cf9>] iscsi_del_ts_from_active_list+0x29/0x50 [iscsi_target_mod] [ 60.782635] [<ffffffffa06e87b1>] iscsi_tx_thread_pre_handler+0xa1/0x180 [iscsi_target_mod] [ 60.782642] [<ffffffffa06fb9ae>] iscsi_target_tx_thread+0x4e/0x220 [iscsi_target_mod] [ 60.782647] [<ffffffffa06fb960>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod] [ 60.782652] [<ffffffffa06fb960>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod] [ 60.782655] [<ffffffff8106f99e>] kthread+0xce/0xe0 [ 60.782657] [<ffffffff8106f8d0>] ? kthread_freezable_should_stop+0x70/0x70 [ 60.782660] [<ffffffff8156026c>] ret_from_fork+0x7c/0xb0 [ 60.782662] [<ffffffff8106f8d0>] ? kthread_freezable_should_stop+0x70/0x70 [ 60.782663] ---[ end trace 9662f4a661d33965 ]--- Since this code is no longer used, go ahead and drop the problematic usage all-together. Reported-by: Gavin Guo <gavin.guo@canonical.com> Reported-by: Moussa Ba <moussaba@micron.com> Cc: stable@vger.kernel.org # 3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-12iscsi/iser-target: Support multi-sequence sendtargets text responseSagi Grimberg3-23/+66
In case sendtargets response is larger than initiator MRDSL, we send a partial sendtargets response (setting F=0, C=1, TTT!=0xffffffff), accept a consecutive empty text message and send the rest of the payload. In case we are done, we set F=1, C=0, TTT=0xffffffff. We do that by storing the sendtargets response bytes done under the session. This patch also makes iscsit_find_cmd_from_itt public for isert. (Re-add cmd->maxcmdsn_inc and clear in iscsit_build_text_rsp - nab) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-04iscsi-target: Don't over-allocate sendtargets text resp bufferSagi Grimberg1-1/+1
No reason to allocate a buffer of size bigger than initiator MaxRecvDataSegmentLength. Moreover, we need to respect initiator MRDSL and not send a larger payload. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-04iscsi-target: Introduce session_get_next_tttSagi Grimberg2-17/+4
Reduce code duplication. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-01-31iscsi-target: Move iscsi_target_[core,stat].h under linux includeSagi Grimberg20-969/+22
Seems strange to see in include/target/iscsi/iscsi_transport.h: include "../../../drivers/target/iscsi/iscsi_target_core.h" Move it to it's natural location. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-01-18netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg1-3/+1
Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16iscsi-target: use '%*ph' specifier to dump hex bufferAndy Shevchenko1-9/+4
Instead of pushing each byte via stack the %*ph specifier allows to supply just a pointer and length of the buffer. The patch converts code to use the specifier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-01-10iscsi-target: Fix typos in enum cmd_flags_tableAndy Grover2-8/+8
Everything else starts with ICF so the last two should as well. Fix places they are used to match. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-01-10target: Allow Write Exclusive non-reservation holders to READLee Duncan1-0/+12
For PGR reservation of type Write Exclusive Access, allow all non reservation holding I_T nexuses with active registrations to READ from the device. This addresses a bug where active registrations that attempted to READ would result in an reservation conflict. Signed-off-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-01-10target: Drop left-over fabric_max_sectors attributeNicholas Bellinger5-50/+0
Now that fabric_max_sectors is no longer used to enforce the maximum I/O size, go ahead and drop it's left-over usage in target-core and associated backend drivers. Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-01-10target: Drop arbitrary maximum I/O size limitNicholas Bellinger5-25/+16
This patch drops the arbitrary maximum I/O size limit in sbc_parse_cdb(), which currently for fabric_max_sectors is hardcoded to 8192 (4 MB for 512 byte sector devices), and for hw_max_sectors is a backend driver dependent value. This limit is problematic because Linux initiators have only recently started to honor block limits MAXIMUM TRANSFER LENGTH, and other non-Linux based initiators (eg: MSFT Fibre Channel) can also generate I/Os larger than 4 MB in size. Currently when this happens, the following message will appear on the target resulting in I/Os being returned with non recoverable status: SCSI OP 28h with too big sectors 16384 exceeds fabric_max_sectors: 8192 Instead, drop both [fabric,hw]_max_sector checks in sbc_parse_cdb(), and convert the existing hw_max_sectors into a purely informational attribute used to represent the granuality that backend driver and/or subsystem code is splitting I/Os upon. Also, update FILEIO with an explicit FD_MAX_BYTES check in fd_execute_rw() to deal with the one special iovec limitiation case. v2 changes: - Drop hw_max_sectors check in sbc_parse_cdb() Reported-by: Lance Gropper <lance.gropper@qosserver.com> Reported-by: Stefan Priebe <s.priebe@profihost.ag> Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org # 3.4 Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-21Merge tag 'scsi-for-linus' of ↵Linus Torvalds8-27/+26
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI update from James Bottomley: "This is a much shorter set of patches that were on the go but didn't make it in to the early pull request for the merge window. It's really a set of bug fixes plus some final cleanup work on the new tag queue API" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: storvsc: ring buffer failures may result in I/O freeze ipr: set scsi_level correctly for disk arrays ipr: add support for async scanning to speed up boot scsi_debug: fix missing "break;" in SDEBUG_UA_CAPACITY_CHANGED case scsi_debug: take sdebug_host_list_lock when changing capacity scsi_debug: improve driver description in Kconfig scsi_debug: fix compare and write errors qla2xxx: fix race in handling rport deletion during recovery causes panic scsi: blacklist RSOC for Microsoft iSCSI target devices scsi: fix random memory corruption with scsi-mq + T10 PI Revert "[SCSI] mpt3sas: Remove phys on topology change" Revert "[SCSI] mpt2sas: Remove phys on topology change." esas2r: Correct typos of "validate" in a comment fc: FCP_PTA_SIMPLE is 0 ibmvfc: remove unused tag variable scsi: remove MSG_*_TAG defines scsi: remove scsi_set_tag_type scsi: remove scsi_get_tag_type scsi: never drop to untagged mode during queue ramp down scsi: remove ->change_queue_type method
2014-12-20Merge branch 'for-next' of ↵Linus Torvalds18-441/+462
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target fixes from Nicholas Bellinger: "The highlights this merge window include: - Allow target fabric drivers to function as built-in. (Roland) - Fix tcm_loop multi-TPG endpoint nexus bug. (Hannes) - Move per device config_item_type into se_subsystem_api, allowing configfs attributes to be defined at module_init time. (Jerome + nab) - Convert existing IBLOCK/FILEIO/RAMDISK/PSCSI/TCMU drivers to use external configfs attributes. (nab) - A number of iser-target fixes related to active session + network portal shutdown stability during extended stress testing. (Sagi + Slava) - Dynamic allocation of T10-PI contexts for iser-target, fixing a potentially bogus iscsi_np->tpg_np pointer reference in >= v3.14 code. (Sagi) - iser-target performance + scalability improvements. (Sagi) - Fixes for SPC-4 Persistent Reservation AllRegistrants spec compliance. (Ilias + James + nab) - Avoid potential short kern_sendmsg() in iscsi-target for now until Al's conversion to use msghdr iteration is merged post -rc1. (Viro) Also, Sagi has requested a number of iser-target patches (9) that address stability issues he's encountered during extended stress testing be considered for v3.10.y + v3.14.y code. Given the amount of LOC involved, it will certainly require extra backporting effort. Apologies in advance to Greg-KH & Co on this. Sagi and I will be working post-merge to ensure they each get applied correctly" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (53 commits) target: Allow AllRegistrants to re-RESERVE existing reservation uapi/linux/target_core_user.h: fix headers_install.sh badness iscsi-target: Fail connection on short sendmsg writes iscsi-target: nullify session in failed login sequence target: Avoid dropping AllRegistrants reservation during unregister target: Fix R_HOLDER bit usage for AllRegistrants iscsi-target: Drop left-over bogus iscsi_np->tpg_np iser-target: Fix wc->wr_id cast warning iser-target: Remove code duplication iser-target: Adjust log levels and prettify some prints iser-target: Use debug_level parameter to control logging level iser-target: Fix logout sequence iser-target: Don't wait for session commands from completion context iser-target: Reduce CQ lock contention by batch polling iser-target: Introduce isert_poll_budget iser-target: Remove an atomic operation from the IO path iser-target: Remove redundant call to isert_conn_terminate iser-target: Use single CQ for TX and RX iser-target: Centralize completion elements to a context iser-target: Cast wr_id with uintptr_t instead of unsinged long ...
2014-12-19target: Allow AllRegistrants to re-RESERVE existing reservationNicholas Bellinger1-1/+4
This patch changes core_scsi3_pro_release() logic to allow an existing AllRegistrants type reservation to be re-reserved by any registered I_T nexus. This addresses a issue where AllRegistrants type RESERVE was receiving RESERVATION_CONFLICT status if dev_pr_res_holder did not match the same I_T nexus, instead of just returning GOOD status following spc4r34 Section 5.9.9: "If the device server receives a PERSISTENT RESERVE OUT command with RESERVE service action where the TYPE field and the SCOPE field contain the same values as the existing type and scope from a persistent reservation holder, it shall not make any change to the existing persistent reservation and shall complete the command with GOOD status." Reported-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com> Cc: Ilias Tsitsimpis <i.tsitsimpis@gmail.com> Cc: Lee Duncan <lduncan@suse.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-18Merge remote-tracking branch 'scsi-queue/drivers-for-3.19' into for-linusJames Bottomley8-27/+26
2014-12-16iscsi-target: Fail connection on short sendmsg writesNicholas Bellinger1-15/+11
This patch changes iscsit_do_tx_data() to fail on short writes when kernel_sendmsg() returns a value different than requested transfer length, returning -EPIPE and thus causing a connection reset to occur. This avoids a potential bug in the original code where a short write would result in kernel_sendmsg() being called again with the original iovec base + length. In practice this has not been an issue because iscsit_do_tx_data() is only used for transferring 48 byte headers + 4 byte digests, along with seldom used control payloads from NOPIN + TEXT_RSP + REJECT with less than 32k of data. So following Al's audit of iovec consumers, go ahead and fail the connection on short writes for now, and remove the bogus logic ahead of his proper upstream fix. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Cc: David S. Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> # v3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-16iscsi-target: nullify session in failed login sequenceSagi Grimberg1-0/+1
In case login sequence failed, make sure conn->sess is NULL before calling wait_conn as some transports (iser) may rely on that (waiting for session commands). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-16target: Avoid dropping AllRegistrants reservation during unregisterNicholas Bellinger1-22/+65
This patch fixes an issue with AllRegistrants reservations where an unregister operation by the I_T nexus reservation holder would incorrectly drop the reservation, instead of waiting until the last active I_T nexus is unregistered as per SPC-4. This includes updating __core_scsi3_complete_pro_release() to reset dev->dev_pr_res_holder with another pr_reg for this special case, as well as a new 'unreg' parameter to determine when the release is occuring from an implicit unregister, vs. explicit RELEASE. It also adds special handling in core_scsi3_free_pr_reg_from_nacl() to release the left-over pr_res_holder, now that pr_reg is deleted from pr_reg_list within __core_scsi3_complete_pro_release(). Reported-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-16target: Fix R_HOLDER bit usage for AllRegistrantsNicholas Bellinger1-3/+23
This patch fixes the usage of R_HOLDER bit for an All Registrants reservation in READ_FULL_STATUS, where only the registration who issued RESERVE was being reported as having an active reservation. It changes core_scsi3_pri_read_full_status() to check ahead of the list walk of active registrations to see if All Registrants is active, and if so set R_HOLDER bit and scope/type fields for all active registrations. Reported-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-13iscsi-target: Drop left-over bogus iscsi_np->tpg_npNicholas Bellinger2-2/+0
This patch drops the left-over iscsi_np->tpg_np pointer, now that iser-target PI is able to dynamically allocate PI contexts per I/O, instead of needing to determine support using a TPG attribute with this bogus reference. Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-13iscsi,iser-target: Expose supported protection ops according to t10_piSagi Grimberg1-3/+4
iSER will report supported protection operations based on the tpg attribute t10_pi settings and HCA PI offload capabilities. If the HCA does not support PI offload or tpg attribute t10_pi is not set, we fall to SW PI mode. In order to do that, we move iscsit_get_sup_prot_ops after connection tpg assignment. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-13iscsi,iser-target: Initiate termination only onceSagi Grimberg1-0/+3
Since commit 0fc4ea701fcf ("Target/iser: Don't put isert_conn inside disconnected handler") we put the conn kref in isert_wait_conn, so we need .wait_conn to be invoked also in the error path. Introduce call to isert_conn_terminate (called under lock) which transitions the connection state to TERMINATING and calls rdma_disconnect. If the state is already teminating, just bail out back (temination started). Also, make sure to destroy the connection when getting a connect error event if didn't get to connected (state UP). Same for the handling of REJECTED and UNREACHABLE cma events. Squashed: iscsi-target: Add call to wait_conn in establishment error flow Reported-by: Slava Shwartsman <valyushash@gmail.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-12Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree update from Jiri Kosina: "Usual stuff: documentation updates, printk() fixes, etc" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) intel_ips: fix a type in error message cpufreq: cpufreq-dt: Move newline to end of error message ps3rom: fix error return code treewide: fix typo in printk and Kconfig ARM: dts: bcm63138: change "interupts" to "interrupts" Replace mentions of "list_struct" to "list_head" kernel: trace: fix printk message scsi: mpt2sas: fix ioctl in comment zbud, zswap: change module author email clocksource: Fix 'clcoksource' typo in comment arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help gpio: msm-v1: make boolean argument more obvious usb: Fix typo in usb-serial-simple.c PCI: Fix comment typo 'COMFIG_PM_OPS' powerpc: Fix comment typo 'CONIFG_8xx' powerpc: Fix comment typos 'CONFiG_ALTIVEC' clk: st: Spelling s/stucture/structure/ isci: Spelling s/stucture/structure/ usb: gadget: zero: Spelling s/infrastucture/infrastructure/ treewide: Fix company name in module descriptions ...
2014-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-7/+5
Pull networking updates from David Miller: 1) New offloading infrastructure and example 'rocker' driver for offloading of switching and routing to hardware. This work was done by a large group of dedicated individuals, not limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend, Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu 2) Start making the networking operate on IOV iterators instead of modifying iov objects in-situ during transfers. Thanks to Al Viro and Herbert Xu. 3) A set of new netlink interfaces for the TIPC stack, from Richard Alpe. 4) Remove unnecessary looping during ipv6 routing lookups, from Martin KaFai Lau. 5) Add PAUSE frame generation support to gianfar driver, from Matei Pavaluca. 6) Allow for larger reordering levels in TCP, which are easily achievable in the real world right now, from Eric Dumazet. 7) Add a variable of napi_schedule that doesn't need to disable cpu interrupts, from Eric Dumazet. 8) Use a doubly linked list to optimize neigh_parms_release(), from Nicolas Dichtel. 9) Various enhancements to the kernel BPF verifier, and allow eBPF programs to actually be attached to sockets. From Alexei Starovoitov. 10) Support TSO/LSO in sunvnet driver, from David L Stevens. 11) Allow controlling ECN usage via routing metrics, from Florian Westphal. 12) Remote checksum offload, from Tom Herbert. 13) Add split-header receive, BQL, and xmit_more support to amd-xgbe driver, from Thomas Lendacky. 14) Add MPLS support to openvswitch, from Simon Horman. 15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen Klassert. 16) Do gro flushes on a per-device basis using a timer, from Eric Dumazet. This tries to resolve the conflicting goals between the desired handling of bulk vs. RPC-like traffic. 17) Allow userspace to ask for the CPU upon what a packet was received/steered, via SO_INCOMING_CPU. From Eric Dumazet. 18) Limit GSO packets to half the current congestion window, from Eric Dumazet. 19) Add a generic helper so that all drivers set their RSS keys in a consistent way, from Eric Dumazet. 20) Add xmit_more support to enic driver, from Govindarajulu Varadarajan. 21) Add VLAN packet scheduler action, from Jiri Pirko. 22) Support configurable RSS hash functions via ethtool, from Eyal Perry. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits) Fix race condition between vxlan_sock_add and vxlan_sock_release net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header net/mlx4: Add support for A0 steering net/mlx4: Refactor QUERY_PORT net/mlx4_core: Add explicit error message when rule doesn't meet configuration net/mlx4: Add A0 hybrid steering net/mlx4: Add mlx4_bitmap zone allocator net/mlx4: Add a check if there are too many reserved QPs net/mlx4: Change QP allocation scheme net/mlx4_core: Use tasklet for user-space CQ completion events net/mlx4_core: Mask out host side virtualization features for guests net/mlx4_en: Set csum level for encapsulated packets be2net: Export tunnel offloads only when a VxLAN tunnel is created gianfar: Fix dma check map error when DMA_API_DEBUG is enabled cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call net: fec: only enable mdio interrupt before phy device link up net: fec: clear all interrupt events to support i.MX6SX net: fec: reset fep link status in suspend function net: sock: fix access via invalid file descriptor net: introduce helper macro for_each_cmsghdr ...
2014-12-10switch memcpy_to_msg() and skb_copy{,_and_csum}_datagram_msg() to primitivesAl Viro1-7/+5
... making both non-draining. That means that tcp_recvmsg() becomes non-draining. And _that_ would break iscsit_do_rx_data() unless we a) make sure tcp_recvmsg() is uniformly non-draining (it is) b) make sure it copes with arbitrary (including shifted) iov_iter (it does, all it uses is iov_iter primitives) c) make iscsit_do_rx_data() initialize ->msg_iter only once. Fortunately, (c) is doable with minimal work and we are rid of one the two places where kernel send/recvmsg users would be unhappy with non-draining behaviour. Actually, that makes all but one of ->recvmsg() instances iov_iter-clean. The exception is skcipher_recvmsg() and it also isn't hard to convert to primitives (iov_iter_get_pages() is needed there). That'll wait a bit - there's some interplay with ->sendmsg() path for that one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-08Merge remote-tracking branch 'scsi-queue/drivers-for-3.19' into for-linusJames Bottomley1-26/+2
Conflicts: drivers/scsi/scsi_debug.c Agreed and tested resolution to a merge problem between a fix in scsi_debug and a driver update Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-12-08Merge remote-tracking branch 'scsi-queue/core-for-3.19' into for-linusJames Bottomley4-49/+8
2014-12-04scsi: remove MSG_*_TAG definesChristoph Hellwig8-26/+26
For SPI drivers use the message definitions from scsi.h, and for target drivers introduce a new TCM_*_TAG namespace. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com
2014-12-04scsi: remove ->change_queue_type methodChristoph Hellwig1-1/+0
Since we got rid of ordered tag support in 2010 the prime use case of switching on and off ordered tags has been obsolete. The other function of enabling/disabling tagging entirely has only been correctly implemented by the 53c700 driver and isn't generally useful. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-12-02target: remove unneeded arrayJulia Lawall1-5/+2
Delete a local array that is only used to be initialized by memset. A semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; type T; @@ { ... when any -T x[...]; <+... when != x - memset(x,...); ...+> } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 18:43:50 +0300