summaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)AuthorFilesLines
2012-08-01Merge branch 'for-linus' of ↵Linus Torvalds1-27/+5
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull second vfs pile from Al Viro: "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the deadlock reproduced by xfstests 068), symlink and hardlink restriction patches, plus assorted cleanups and fixes. Note that another fsfreeze deadlock (emergency thaw one) is *not* dealt with - the series by Fernando conflicts a lot with Jan's, breaks userland ABI (FIFREEZE semantics gets changed) and trades the deadlock for massive vfsmount leak; this is going to be handled next cycle. There probably will be another pull request, but that stuff won't be in it." Fix up trivial conflicts due to unrelated changes next to each other in drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) delousing target_core_file a bit Documentation: Correct s_umount state for freeze_fs/unfreeze_fs fs: Remove old freezing mechanism ext2: Implement freezing btrfs: Convert to new freezing mechanism nilfs2: Convert to new freezing mechanism ntfs: Convert to new freezing mechanism fuse: Convert to new freezing mechanism gfs2: Convert to new freezing mechanism ocfs2: Convert to new freezing mechanism xfs: Convert to new freezing code ext4: Convert to new freezing mechanism fs: Protect write paths by sb_start_write - sb_end_write fs: Skip atime update on frozen filesystem fs: Add freezing handling to mnt_want_write() / mnt_drop_write() fs: Improve filesystem freezing handling switch the protection of percpu_counter list to spinlock nfsd: Push mnt_want_write() outside of i_mutex btrfs: Push mnt_want_write() outside of i_mutex fat: Push mnt_want_write() outside of i_mutex ...
2012-08-01delousing target_core_file a bitAl Viro1-27/+5
* set_fs(KERNEL_DS) + getname() is probably the weirdest implementation of strdup() I've seen. Especially since they don't to copy it at all... * filp_open() never returns NULL; it's ERR_PTR(-E...) on failure. * file->f_dentry is never going to be NULL, TYVM. * match_strdup() + snprintf() + kfree() is a bloody weird way to spell match_strlcpy(). Pox on cargo-cult programmers... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-21iscsi-target: Drop bogus struct file usage for iSCSI/SCTPAl Viro3-78/+6
From Al Viro: BTW, speaking of struct file treatment related to sockets - there's this piece of code in iscsi: /* * The SCTP stack needs struct socket->file. */ if ((np->np_network_transport == ISCSI_SCTP_TCP) || (np->np_network_transport == ISCSI_SCTP_UDP)) { if (!new_sock->file) { new_sock->file = kzalloc( sizeof(struct file), GFP_KERNEL); For one thing, as far as I can see it'not true - sctp does *not* depend on socket->file being non-NULL; it does, in one place, check socket->file->f_flags for O_NONBLOCK, but there it treats NULL socket->file as "flag not set". Which is the case here anyway - the fake struct file created in __iscsi_target_login_thread() (and in iscsi_target_setup_login_socket(), with the same excuse) do *not* get that flag set. Moreover, it's a bloody serious violation of a bunch of asserts in VFS; all struct file instances should come from filp_cachep, via get_empty_filp() (or alloc_file(), which is a wrapper for it). FWIW, I'm very tempted to do this and be done with the entire mess: Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Grover <agrover@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-20target: NULL dereference on error pathDan Carpenter1-5/+6
During a failure in transport_add_device_to_core_hba() code, we called destroy_workqueue(dev->tmr_wq) before ->tmr_wq was allocated which leads to an oops. This fixes a regression introduced in with: commit af8772926f019b7bddd7477b8de5f3b0f12bad21 Author: Christoph Hellwig <hch@infradead.org> Date: Sun Jul 8 15:58:49 2012 -0400 target: replace the processing thread with a TMR work queue Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-18target: Allow for target_submit_cmd() returning errorsRoland Dreier3-11/+19
We want it to be possible for target_submit_cmd() to return errors up to its fabric module callers. For now just update the prototype to return an int, and update all callers to handle non-zero return values as an error. This is immediately useful for tcm_qla2xxx to fix a long-standing active I/O session shutdown race, but tcm_fc, usb-gadget, and sbp-target the fabric maintainers need to check + ACK that handling a target_submit_cmd() failure due to session shutdown does not introduce regressions (nab: Respin against for-next after initial NACK + update docbook comment + fix double se_cmd init in exception path for usb-gadget) Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: Arun Easi <arun.easi@qlogic.com> Cc: Chris Boot <bootc@bootc.net> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Mark Rustad <mark.d.rustad@intel.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Felipe Balbi <balbi@ti.com> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Check number of unmap descriptors against our limitRoland Dreier1-0/+5
Fail UNMAP commands that have more than our reported limit on unmap descriptors. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Fix possible integer underflow in UNMAP emulationRoland Dreier1-10/+10
It's possible for an initiator to send us an UNMAP command with a descriptor that is less than 8 bytes; in that case it's really bad for us to set an unsigned int to that value, subtract 8 from it, and then use that as a limit for our loop (since the value will wrap around to a huge positive value). Fix this by making size be signed and only looping if size >= 16 (ie if we have at least a full descriptor available). Also remove offset as an obfuscated name for the constant 8. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Fix reading of data length fields for UNMAP commandsRoland Dreier1-3/+3
The UNMAP DATA LENGTH and UNMAP BLOCK DESCRIPTOR DATA LENGTH fields are in the unmap descriptor (the payload transferred to our data out buffer), not in the CDB itself. Read them from the correct place in target_emulated_unmap. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Add range checking to UNMAP emulationRoland Dreier1-0/+12
When processing an UNMAP command, we need to make sure that the number of blocks we're asked to UNMAP does not exceed our reported maximum number of blocks per UNMAP, and that the range of blocks we're unmapping doesn't go past the end of the device. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Add generation of LOGICAL BLOCK ADDRESS OUT OF RANGERoland Dreier1-0/+10
Many SCSI commands are defined to return a CHECK CONDITION / ILLEGAL REQUEST with ASC set to LOGICAL BLOCK ADDRESS OUT OF RANGE if the initiator sends a command that accesses a too-big LBA. Add an enum value and case entries so that target code can return this status. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Make unnecessarily global se_dev_align_max_sectors() staticRoland Dreier1-1/+1
Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Remove se_session.sess_wait_listRoland Dreier1-12/+10
Since we set se_session.sess_tearing_down and stop new commands from being added to se_session.sess_cmd_list before we wait for commands to finish when freeing a session, there's no need for a separate sess_wait_list -- if we let new commands be added to sess_cmd_list after setting sess_tearing_down, that would be a bug that breaks the logic of waiting in-flight commands. Also rename target_splice_sess_cmd_list() to target_sess_cmd_list_set_waiting(), since we are no longer splicing onto a separate list. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Check sess_tearing_down in target_get_sess_cmd()Roland Dreier1-5/+19
Target core code assumes that target_splice_sess_cmd_list() has set sess_tearing_down and moved the list of pending commands to sess_wait_list, no more commands will be added to the session; if any are added, nothing keeps the se_session from being freed while the command is still in flight, which e.g. leads to use-after-free of se_cmd->se_sess in target_release_cmd_kref(). To enforce this invariant, put a check of sess_tearing_down inside of sess_cmd_lock in target_get_sess_cmd(); any checks before this are racy and can lead to the use-after-free described above. For example, the qla_target check in qlt_do_work() checks sess_tearing_down from work thread context but then drops all locks before calling target_submit_cmd() (as it must, since that is a sleeping function). However, since no locks are held, anything can happen with respect to the session it has looked up -- although it does correctly get sess_kref within its lock, so the memory won't be freed while target_submit_cmd() is actually running, nothing stops eg an ACL from being dropped and calling ->shutdown_session() (which calls into target_splice_sess_cmd_list()) before we get to target_get_sess_cmd(). Once this happens, the se_session memory can be freed as soon as target_submit_cmd() returns and qlt_do_work() drops its reference, even though we've just added a command to sess_cmd_list. To prevent this use-after-free, check sess_tearing_down inside of sess_cmd_lock right before target_get_sess_cmd() adds a command to sess_cmd_list; this is synchronized with target_splice_sess_cmd_list() so that every command is either waited for or not added to the queue. (nab: Keep target_submit_cmd() returning void for now..) Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17sbp-target: Consolidate duplicated error path code in sbp_handle_command()Roland Dreier1-16/+12
Cc: Chris Boot <bootc@bootc.net> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-17target: Un-export target_get_sess_cmd()Roland Dreier1-3/+3
There are no in-tree users of target_get_sess_cmd() outside of target_core_transport.c. Any new code should use the higher-level target_submit_cmd() interface. So let's un-export target_get_sess_cmd() and make it static to the one file where it's actually used. (nab: Fix up minor fuzz to for-next) Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Make core_disable_device_list_for_node use pre-refactoring lock orderingNicholas Bellinger1-7/+2
So after kicking around commit 547ac4c9c90 around a bit more, a tcm_qla2xxx LUN unlink OP has generated the following warning: [ 50.386625] qla2xxx [0000:07:00.0]-00af:0: Performing ISP error recovery - ha=ffff880263774000. [ 70.572988] qla2xxx [0000:07:00.0]-8038:0: Cable is unplugged... [ 126.527531] ------------[ cut here ]------------ [ 126.532677] WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0x41/0x8c() [ 126.540433] Hardware name: S5520HC [ 126.544248] Modules linked in: tcm_vhost ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi dm_round_robin dm_multipath scsi_dh loop i2c_i801 kvm_intel kvm crc32c_intel i2c_core microcode joydev button iomemory_vsl(O) pcspkr ext3 jbd uhci_hcd lpfc ata_piix libata ehci_hcd qla2xxx mlx4_core scsi_transport_fc scsi_tgt igb [last unloaded: scsi_wait_scan] [ 126.595567] Pid: 3283, comm: unlink Tainted: G O 3.5.0-rc2+ #33 [ 126.603128] Call Trace: [ 126.605853] [<ffffffff81026b91>] ? warn_slowpath_common+0x78/0x8c [ 126.612737] [<ffffffff8102c342>] ? local_bh_enable_ip+0x41/0x8c [ 126.619433] [<ffffffffa03582a2>] ? core_disable_device_list_for_node+0x70/0xe3 [target_core_mod] [ 126.629323] [<ffffffffa035849f>] ? core_clear_lun_from_tpg+0x88/0xeb [target_core_mod] [ 126.638244] [<ffffffffa0362ec1>] ? core_tpg_post_dellun+0x17/0x48 [target_core_mod] [ 126.646873] [<ffffffffa03575ee>] ? core_dev_del_lun+0x26/0x8c [target_core_mod] [ 126.655114] [<ffffffff810bcbd1>] ? dput+0x27/0x154 [ 126.660549] [<ffffffffa0359aa0>] ? target_fabric_port_unlink+0x3b/0x41 [target_core_mod] [ 126.669661] [<ffffffffa034a698>] ? configfs_unlink+0xfc/0x14a [configfs] [ 126.677224] [<ffffffff810b5979>] ? vfs_unlink+0x58/0xb7 [ 126.683141] [<ffffffff810b6ef3>] ? do_unlinkat+0xbb/0x142 [ 126.689253] [<ffffffff81330c75>] ? page_fault+0x25/0x30 [ 126.695170] [<ffffffff81335df9>] ? system_call_fastpath+0x16/0x1b [ 126.702053] ---[ end trace 2f8e5b0a9ec797ef ]--- [ 126.756336] qla2xxx [0000:07:00.0]-00af:0: Performing ISP error recovery - ha=ffff880263774000. [ 146.942414] qla2xxx [0000:07:00.0]-8038:0: Cable is unplugged... So this warning triggered because device_list disable logic is now holding nacl->device_list_lock w/ spin_lock_irqsave before obtaining port->sep_alua_lock with only spin_lock_bh.. The original disable logic obtains *deve ahead of dropping the entry from deve->alua_port_list and then obtains ->device_list_lock to do the remaining work. Also, I'm pretty sure this particular warning is being generated by a demo-mode session in tcm_qla2xxx, and not by explicit NodeACL MappedLUNs. The Initiator MappedLUNs are already protected by a seperate configfs symlink reference back se_lun->lun_group, and the demo-mode se_node_acl (and associated ->device_list[]) is released during se_portal_group->tpg_group shutdown. The following patch drops the extra functional change to disable logic in commit 547ac4c9c90 Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: refactor core_update_device_list_for_node()Andy Grover3-77/+103
Code was almost entirely divided based on value of bool param "enable". Split it into two functions. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Eliminate else using boolean logicAndy Grover1-4/+2
Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Misc retval cleanupsAndy Grover2-11/+16
Bubble-up retval from iscsi_update_param_value() and iscsit_ta_authentication(). Other very small retval cleanups. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Remove hba param from core_dev_add_lunAndy Grover3-6/+3
Only used in a debugprint, and function signature is cleaner now. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Remove unneeded double parenthesesAndy Grover4-8/+8
Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: replace the processing thread with a TMR work queueChristoph Hellwig3-211/+18
The last functionality of the target processing thread is offloading possibly long running task management requests from the submitter context. To keep TMR semantics the same we need a single threaded ordered queue, which can be provided by a per-device workqueue with the right flags. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: remove transport_generic_handle_cdb_mapChristoph Hellwig1-43/+1
Remove this command submission path which is not used by any in-tree driver. This also removes the now unused new_cmd_map fabtric method, which a few drivers implemented despite never calling transport_generic_handle_cdb_map. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: simply fabric driver queue full processingChristoph Hellwig1-7/+6
There is no need to schedule the delayed processing in a workqueue that offloads it to the target processing thread. Instead execute it directly from the workqueue. There will be a lot of future work in this area, which I'd likfe to defer for now as it is not nessecary for getting rid of the target processing thread. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: remove transport_generic_handle_dataChristoph Hellwig1-39/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17tcm_fc: Offload WRITE I/O backend submission to tpg workqueueChristoph Hellwig1-2/+11
Defer the write processing to the internal to be able to use target_execute_cmd. I'm not even entirely sure the calling code requires this due to the convoluted structure in libfc, but let's be safe for now. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Mark Rustad <mark.d.rustad@intel.com> Cc: Kiran Patil <Kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17iscsit: use target_execute_cmd for WRITEsChristoph Hellwig3-5/+8
All three callers of transport_generic_handle_data are from user context and can use target_execute_cmd directly to handle the backend I/O submission of WRITE I/O. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: merge transport_generic_write_pending into transport_generic_new_cmdChristoph Hellwig1-48/+26
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: call transport_check_aborted_status from target_execute_cmdChristoph Hellwig1-0/+6
When we call target_execute_cmd for write commands the command has been on the state list before an abort might have come in before target_execute_cmd. Call transport_check_aborted_status to deal with this case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: remove transport_generic_process_writeChristoph Hellwig3-15/+5
Just call target_execute_cmd directly. Also, convert loopback, sbp, usb-gadget to use the newly exported target_execute_cmd(). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: split transport_cmd_check_stopChristoph Hellwig1-62/+62
Inline the transport_off == 0 case into target_execute_cmd to simplify the function for the remaining cases. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17Revert "target: Do not special-case loop and iscsi fabric module loads"Nicholas Bellinger1-0/+38
Existing lio_dump.py code expects this to be in place for /iscsi. Revert for now to avoid userspace breakage in lio-utils This reverts commit fd88a785f9ac5d6be437c528571ccd85cdf2d493. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: move unmap to struct spc_opsChristoph Hellwig2-63/+49
Having all the unmap payload parsing in the backed is a bit ugly, but until more drivers support it and we can find a good interface for all of them that seems the way to go. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: move write_same to struct spc_opsChristoph Hellwig2-34/+36
Add spc_ops->execute_write_same() caller for ->execute_cmd() setup, and update IBLOCK backends to use it. (nab: add export of spc_get_write_same_sectors symbol) (roland: Carry forward: Fix range calculation in WRITE SAME emulation when num blocks == 0) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: move sync_cache to struct spc_opsChristoph Hellwig3-19/+12
Add spc_ops->execute_sync_cache() caller for ->execute_cmd() setup, and update IBLOCK + FILEIO backends to use it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: add struct spc_ops + initial ->execute_rw pointer usageChristoph Hellwig6-22/+61
Remove the execute_cmd method in struct se_subsystem_api, and always use the one directly in struct se_cmd. To make life simpler for SBC virtual backends a struct spc_ops that is passed to sbc_parse_cmd is added. For now it only contains an execute_rw member, but more will follow with the subsequent commits. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: remove dead SCF_ flagsChristoph Hellwig1-1/+0
Remove the dead SCF_SE_ALLOW_EOO and SCF_DELAYED_CMD_FROM_SAM_ATTR from se_cmd_flags_table. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target/iscsi: Remove dead code in lio_get_tpg_from_tpg_item()Roland Dreier1-22/+0
It's got no callers... Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target/iblock: Add parameter to specify read-only devicesAndy Grover2-7/+29
see https://bugzilla.redhat.com/show_bug.cgi?id=818855 Adds a parameter so read-only block devices may be registered as LIO backstores. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Do not special-case loop and iscsi fabric module loadsAndy Grover1-38/+0
These modules, along with other fabrics, should be loaded as-needed by the LIO userspace tools. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: move ref_cmd from the generic se_tmr_req into iscsi codeChristoph Hellwig2-23/+21
Also remove the unused ref_task_lun field in struct se_tmr_req. (nab: Add missing TASK_REASSIGN ref_lun vs. ref_cmd orig_fe_lun checks in iscsit_tmr_task_reassign) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: remove the execute listChristoph Hellwig3-236/+98
Since "target: Drop se_device TCQ queue_depth usage from I/O path" we always submit all commands (or back then, tasks) from __transport_execute_tasks. That means the the execute list has lots its purpose, as we can simply submit the commands that are restarted in transport_complete_task_attr directly while we walk the list. In fact doing so also solves a race in the way it currently walks to delayed_cmd_list as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target/pscsi: Only emulate REPORT_LUNS for passthroughNicholas Bellinger1-9/+3
This patch changes back the pSCSI backend to follow pre 3.6-queue code to passthrough SPC-3 persistent reservations + SPC-2 legacy reservation handling to the underlying LLD / physical hardware. For folks who really need this for their own SPC-3 emulation logic, avoid changing the functionality of this beyond what is exported for REPORT_LUNS for existing code, and to avoid problems with SPC-3 PR/ALUA as INQUIRY EVPD=0x83 emulation needs to be in place in order for this to work as expected with spc_parse_cdb() code.. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Move MAINTENANCE_[IN,OUT] from pscsi_parse_cdb -> spc_parse_cdbNicholas Bellinger1-1/+41
The MAINTENANCE_[IN,OUT] CDB parsing required for generic ALUA emulation needs to be in spc_parse_cdb() to function for virtual TYPE_DISK exports, instead of in backend pscsi_parse_cdb() code used only for passthrough ops. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: move transport_generic_prepare_cdb into pscsiChristoph Hellwig2-29/+26
The virtual drivers don't need to clear cdb fields they never look at, so move this code into the pscsi backend. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: move code for CDB emulationChristoph Hellwig7-1658/+1152
Move the existing code in target_core_cdb.c into the files for the command sets that the emulations implement. (roland + nab: Squash patch: Fix range calculation in WRITE SAME emulation when num blocks == 0s) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: add a parse_cdb method to the backend driversChristoph Hellwig9-733/+931
Instead of trying to handle all SCSI command sets in one function (transport_generic_cmd_sequencer) call out to the backend driver to perform this functionality. For pSCSI a copy of the existing code is used, but for all virtual backends we can use a new parse_sbc_cdb helper is used to provide a simple SBC emulation. For now this setups means a fair amount of duplication between pSCSI and the SBC library, but patches later in this series will sort out that problem. (nab: Fix up build failure in target_core_pscsi.c) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: split parsing of SPC commands into a separate helperChristoph Hellwig4-109/+176
(nab: Add EXPORT_SYMBOL usage for spc_parse_cdb) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: split overflow and underflow checks into a helperChristoph Hellwig1-37/+53
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: remove control CDB flagsChristoph Hellwig4-82/+40
We don't need three flags to classifiy the CDB as we can check for a NULL S/G list for a dataless command, and can infer from the absence of the data flag that we deal with a control CDB. Also remove the _SG_IO from the data CDB flag as all I/O is dont on S/G lists now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-03 11:40:32 +0300