summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)AuthorFilesLines
2021-04-08spi: spi-zynqmp-gqspi: Fix runtime PM imbalance in zynqmp_qspi_probeDinghao Liu1-0/+1
When platform_get_irq() fails, a pairing PM usage counter increment is needed to keep the counter balanced. It's the same for the following error paths. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20210408092559.3824-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-07spi: orion: Use device_get_match_data() helperTian Tao1-4/+2
Use the device_get_match_data() helper instead of open coding. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1617258288-1490-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-07spi: hisi-kunpeng: Fix Woverflow warning on conversionJay Fang1-1/+1
Fix warning Woverflow on type conversion reported on x86_64: drivers/spi/spi-hisi-kunpeng.c:361:9: warning: conversion from 'long unsigned int' to 'u32' {aka 'unsigned int'} changes value from '18446744073709551600' to '4294967280' [-Woverflow] The registers are 32 bit, so fix by casting to u32. Fixes: c770d8631e18 ("spi: Add HiSilicon SPI Controller Driver for Kunpeng SoCs") Cc: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1617762660-54681-1-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-31spi: Add HiSilicon SPI Controller Driver for Kunpeng SoCsJay Fang3-0/+516
This driver supports SPI Controller for HiSilicon Kunpeng SoCs. This driver supports SPI operations using FIFO mode of transfer. DMA is not supported, and we just use IRQ mode for operation completion notification. Only ACPI firmware is supported. Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616836200-45827-1-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-31Merge tag 'mute-led-rework' of ↵Mark Brown1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13 ALSA: control - add generic LED API This patchset tries to resolve the diversity in the audio LED control among the ALSA drivers. A new control layer registration is introduced which allows to run additional operations on top of the elementary ALSA sound controls. A new control access group (three bits in the access flags) was introduced to carry the LED group information for the sound controls. The low-level sound drivers can just mark those controls using this access group. This information is not exported to the user space, but user space can manage the LED sound control associations through sysfs (last patch) per Mark's request. It makes things fully configurable in the kernel and user space (UCM). The actual state ('route') evaluation is really easy (the minimal value check for all channels / controls / cards). If there's more complicated logic for a given hardware, the card driver may eventually export a new read-only sound control for the LED group and do the logic itself. The new LED trigger control code is completely separated and possibly optional (there's no symbol dependency). The full code separation allows eventually to move this LED trigger control to the user space in future. Actually it replaces the already present functionality in the kernel space (HDA drivers) and allows a quick adoption for the recent hardware (ASoC codecs including SoundWire). snd_ctl_led 24576 0 The sound driver implementation is really easy: 1) call snd_ctl_led_request() when control LED layer should be automatically activated / it calls module_request("snd-ctl-led") on demand / 2) mark all related kcontrols with SNDRV_CTL_ELEM_ACCESS_SPK_LED or SNDRV_CTL_ELEM_ACCESS_MIC_LED Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-31spi: pl022: Convert to use GPIO descriptorsLinus Walleij1-6/+14
This converts the PL022 driver to use GPIO descriptors instead of the old global GPIO numberspace. Since the driver handles messages on its own it needs to manage the GPIO descriptor directly. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210330164907.2346010-3-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-31spi: pl022: Use GPIOs looked up by the coreLinus Walleij1-60/+10
The SPI core looks up GPIO lines from the device tree, so let's stop trying to do that on our own and rely on the core to do this for us. In addition to the GPIO line we also need to keep track of the chip select index separately, as the native chip select needs this index. The driver was reusing the same GPIO array for native chip select indices, so keep this in a separate state variable instead. The facility to pass in custom GPIO lines from the platform data can go, because even if we do have out-of-tree code that want to use platform data, they can soon pass in GPIOs using machine GPIO descriptor tables which will be available after the next step when we convert the driver to using GPIO descriptors. The implicit inclusion of <linux/of.h> is made explicit as we no longer need to include <linux/of_gpio.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210330164907.2346010-2-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-31spi: pl022: Drop custom per-chip cs_controlLinus Walleij1-24/+2
Drop the custom cs_control() assigned through platform data, we have no in-tree users and the only out-of-tree use I have ever seen of this facility is to pull GPIO lines, which is something the driver can already do for us. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210330164907.2346010-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-29spi: pl022: User more sensible defaultsLinus Walleij1-2/+2
When using the device tree, which must be considered normal these days, in order to get some kind of normal functionality out of the PL022 users have to actively go into the device tree and edit the SPI clients like this: spi { compatible = "arm,pl022"; num-cs = <1>; cs-gpios = <&gpio 0 GPIO_ACTIVE_LOW>; foo@0 { compatible = "foo"; reg = <0>; pl022,interface = <0>; pl022,com-mode = <0>; }; }; Otherwise the PL022 will come up as a client (slave) and using polling mode. This is quite unintuitive and many users will get their device trees wrong. Alter the defaults such that we come up in host mode (master) and use interrupt mode. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210328121530.1983081-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-25Merge series "enable flexspi support on imx8mp" from Heiko Schocher ↵Mark Brown1-0/+1
<hs@denx.de>: add compatible entry in nxp_fspi driver for imx8mp @Shawn: If this series is accepted, can you apply the DTS patches from series v2? http://lists.infradead.org/pipermail/linux-arm-kernel/2021-March/643292.html http://lists.infradead.org/pipermail/linux-arm-kernel/2021-March/643293.html Changes in v4: rebased against: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next a43e89624baea ("Merge remote-tracking branch 'spi/for-5.13' into spi-next") Changes in v3: - seperate spi changes from series: http://lists.infradead.org/pipermail/linux-arm-kernel/2021-March/643289.html into own series as Kuldeep suggested and rebased against git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next 144c79ef33536 ("Merge tag 'perf-tools-fixes-for-v5.12-2020-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux") - no changes, rebased against git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next 144c79ef33536 Merge tag 'perf-tools-fixes-for-v5.12-2020-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Changes in v2: - work in comments from Marco add own compatible entry for imx8mp Heiko Schocher (2): spi: fspi: enable fspi driver for on imx8mp dt-bindings: spi: add compatible entry for imx8mp in FlexSPI controller Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt | 1 + drivers/spi/spi-nxp-fspi.c | 1 + 2 files changed, 2 insertions(+) -- 2.29.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2021-03-25spi: fsi: Remove multiple sequenced ops for restricted chipsEddie James1-20/+7
Updated restricted chips have trouble processing multiple sequenced operations. So remove the capability to sequence multiple operations and reduce the maximum transfer size to 8 bytes. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210324220516.41192-1-eajames@linux.ibm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-25spi: fspi: enable fspi driver for on imx8mpHeiko Schocher1-0/+1
add compatible entry in nxp_fspi driver for imx8mp. Signed-off-by: Heiko Schocher <hs@denx.de> Link: https://lore.kernel.org/r/20210316075928.1763460-2-hs@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-25spi: imx: Use of_device_get_match_data() helperTian Tao1-3/+2
Use the of_device_get_match_data() helper instead of open coding. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1616385476-53327-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-24spi: pl022: Fix trailing whitespaceJay Fang1-1/+1
Fix checkpatch error: ERROR: trailing whitespace #1198: FILE: spi-pl022.c:1198: Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-12-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-24spi: rockchip: Fix code indent should use tabs where possibleJay Fang1-3/+3
Fix checkpatch errors: ERROR: code indent should use tabs where possible #484: FILE: spi-rockchip.c:484: +^I | CR0_BHT_8BIT << CR0_BHT_OFFSET$ ERROR: code indent should use tabs where possible #485: FILE: spi-rockchip.c:485: +^I | CR0_SSD_ONE << CR0_SSD_OFFSET$ ERROR: code indent should use tabs where possible #486: FILE: spi-rockchip.c:486: +^I | CR0_EM_BIG << CR0_EM_OFFSET;$ Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-11-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-24spi: spi-mem: Fix code indent should use tabs where possibleJay Fang1-3/+3
Fix checkpatch errors: ERROR: code indent should use tabs where possible #624: FILE: spi-mem.c:624: ERROR: code indent should use tabs where possible #626: FILE: spi-mem.c:626: ERROR: code indent should use tabs where possible #627: FILE: spi-mem.c:627: Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-10-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-24spi: jcore: Fix trailing statements should be on next lineJay Fang1-1/+2
Fix checkpatch error: ERROR: trailing statements should be on next line #85: FILE: spi-jcore.c:85: + if (speed == hw->speed_hz) return; Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-9-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-24spi: spi-bitbang: Fix open brace following function definitions go on the ↵Jay Fang1-3/+6
next line Fix checkpatch errors: ERROR: open brace '{' following function definitions go on the next line #54: FILE: spi-bitbang.c:54: ERROR: open brace '{' following function definitions go on the next line #82: FILE: spi-bitbang.c:82: ERROR: open brace '{' following function definitions go on the next line #110: FILE: spi-bitbang.c:110: Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-8-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-24spi: dln2: Fix open brace following function definitions go on the next lineJay Fang1-1/+2
Fix checkpatch error: ERROR: open brace '{' following function definitions go on the next line #545: FILE: spi-dln2.c:545: +static int dln2_spi_rdwr(struct dln2_spi *dln2, const u8 *tx_data, + u8 *rx_data, u16 data_len, u8 attr) { Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-7-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-24spi: spi-mtk-nor: Fix checkpatch spacing errorJay Fang1-1/+1
Fix checkpatch error: ERROR: space required before the open parenthesis '(' #295: FILE: spi-mtk-nor.c:295: + switch(op->data.dir) { Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-6-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-24spi: omap-100k: Fix checkpatch spacing errorsJay Fang1-4/+4
Fix checkpatch errors: ERROR: space prohibited before that ',' (ctx:WxW) #113: FILE: spi-omap-100k.c:113: + writew(data , spi100k->base + SPI_TX_MSB); ^ ERROR: space prohibited before that ',' (ctx:WxW) #249: FILE: spi-omap-100k.c:249: + writew(0x3e , spi100k->base + SPI_SETUP1); ^ ERROR: space prohibited before that ',' (ctx:WxW) #250: FILE: spi-omap-100k.c:250: + writew(0x00 , spi100k->base + SPI_STATUS); ^ ERROR: space prohibited before that ',' (ctx:WxW) #251: FILE: spi-omap-100k.c:251: + writew(0x3e , spi100k->base + SPI_CTRL); ^ Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-5-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-24spi: pxa2xx: Fix checkpatch spacing errorsJay Fang2-2/+2
Fix checkpatch errors: ERROR: space prohibited before that ',' (ctx:WxW) #255: FILE: spi-pxa2xx-pci.c:255: + ssp->clk = clk_register_fixed_rate(&dev->dev, buf , NULL, 0, ^ ERROR: "foo* bar" should be "foo *bar" #621: FILE: spi-pxa2xx.c:621: +static void int_error_stop(struct driver_data *drv_data, const char* msg) Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-4-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-24spi: sprd: Fix checkpatch spacing errorJay Fang1-1/+1
Fix checkpatch error: ERROR: space prohibited before that close parenthesis ')' #213: FILE: spi-sprd-adi.c:213: + rd_addr = (val & RD_ADDR_MASK ) >> RD_ADDR_SHIFT; Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-3-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-24spi: spi-topcliff-pch: Fix checkpatch spacing errorJay Fang1-1/+2
Fix checkpatch error: ERROR: space prohibited before that '++' (ctx:WxB) #1204: FILE: spi-topcliff-pch.c:1204: + for (i = 0; i < cnt; i ++) { ^ Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-2-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-23spi: mediatek: add mt8195 spi slave supportLeilk Liu1-0/+8
this patch adds mt8195 spi slave compatible support. Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Link: https://lore.kernel.org/r/20210322055244.30179-5-leilk.liu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-23spi: mediatek: add mtk_spi_compatible supportLeilk Liu1-4/+24
this patch adds max_fifo_size and must_rx compat support. Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Link: https://lore.kernel.org/r/20210322055244.30179-4-leilk.liu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-19spi: stm32: Fix use-after-free on unbindAlain Volmat1-14/+10
stm32_spi_remove() accesses the driver's private data after calling spi_unregister_master() even though that function releases the last reference on the spi_master and thereby frees the private data. Fix by switching over to the new devm_spi_alloc_master() helper which keeps the private data accessible until the driver has unbound. Fixes: 8d559a64f00b ("spi: stm32: drop devres version of spi_register_master") Reported-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1616052290-10887-1-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-17spi: imx: Improve driver descriptionFabio Estevam1-1/+1
"SPI Controller driver" is a too generic description. Make it i.MX specific instead. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210316180922.239805-1-festevam@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-17spi: Fix spelling mistake "softwade" -> "software"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210317093936.5572-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-16Merge series "spi: Adding support for software nodes" from Heikki Krogerus ↵Mark Brown1-15/+6
<heikki.krogerus@linux.intel.com>: Hi, The older API used to supply additional device properties for the devices - so mainly the function device_add_properties() - is going to be removed. The reason why the API will be removed is because it gives false impression that the properties are assigned directly to the devices, which has actually never been the case - the properties have always been assigned to a software fwnode which was then just directly linked with the device when the old API was used. By only accepting device properties instead of complete software nodes, the subsystems remove any change of taking advantage of the other features the software nodes have. The change that is required from the spi subsystem and the drivers is trivial. Basically only the "properties" member in struct spi_board_info, which was a pointer to struct property_entry, is replaced with a pointer to a complete software node. thanks, Heikki Krogerus (4): spi: Add support for software nodes ARM: pxa: icontrol: Constify the software node ARM: pxa: zeus: Constify the software node spi: Remove support for dangling device properties arch/arm/mach-pxa/icontrol.c | 12 ++++++++---- arch/arm/mach-pxa/zeus.c | 6 +++++- drivers/spi/spi.c | 21 ++++++--------------- include/linux/spi/spi.h | 7 +++---- 4 files changed, 22 insertions(+), 24 deletions(-) -- 2.30.1 base-commit: a38fd8748464831584a19438cbb3082b5a2dab15
2021-03-16spi: Remove support for dangling device propertiesHeikki Krogerus1-21/+3
>From now on only accepting complete software nodes. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210303152814.35070-5-heikki.krogerus@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-16spi: Add support for software nodesHeikki Krogerus1-2/+11
Making it possible for the drivers to assign complete software fwnodes to the devices instead of only the device properties in those nodes. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210303152814.35070-2-heikki.krogerus@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-16spi: spi-qcom-qspi: Convert to use resource-managed OPP APIYangtao Li1-13/+5
Use resource-managed OPP API to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-16spi: spi-geni-qcom: Convert to use resource-managed OPP APIYangtao Li1-10/+6
Use resource-managed OPP API to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-12Merge series "spi: finalize 'delay_usecs' removal/transition" from Alexandru ↵Mark Brown8-28/+15
Ardelean <aardelean@deviqon.com>: A while back I started the introduction of the 'spi_delay' data type: https://lore.kernel.org/linux-spi/20190926105147.7839-1-alexandru.ardelean@analog.com/ Users of the 'delay_usecs' were removed from drivers. Now it's time to remove the 'delay_usecs' from the SPI subsystem and use only the 'delay' field. This changeset adapts all SPI drivers to do without 'delay_usecs'. Additionally, for greybus we need to adapt it to use the 'delay' in nano-seconds and convert it to micro-seconds. Alexandru Ardelean (10): spi: spi-axi-spi-engine: remove usage of delay_usecs spi: bcm63xx-spi: don't check 'delay_usecs' field spi: spi-bcm-qspi: replace 'delay_usecs' with 'delay.value' check spi: spi-sh: replace 'delay_usecs' with 'delay.value' in pr_debug spi: spi-tegra20-flash: don't check 'delay_usecs' field for spi transfer staging: greybus: spilib: use 'spi_delay_to_ns' for getting xfer delay spi: spi-falcon: remove check for 'delay_usecs' spi: fsl-espi: remove usage of 'delay_usecs' field spi: core: remove 'delay_usecs' field from spi_transfer spi: docs: update info about 'delay_usecs' Documentation/spi/spi-summary.rst | 7 +++++-- drivers/spi/spi-axi-spi-engine.c | 12 ++++-------- drivers/spi/spi-bcm-qspi.c | 2 +- drivers/spi/spi-bcm63xx.c | 2 +- drivers/spi/spi-falcon.c | 2 +- drivers/spi/spi-fsl-espi.c | 17 +++++------------ drivers/spi/spi-sh.c | 4 ++-- drivers/spi/spi-tegra20-sflash.c | 3 +-- drivers/spi/spi.c | 1 - drivers/staging/greybus/spilib.c | 5 ++++- include/linux/spi/spi.h | 12 ------------ 11 files changed, 24 insertions(+), 43 deletions(-) -- 2.29.2 _______________________________________________ devel mailing list devel@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
2021-03-12spi: stm32: avoid ifdef CONFIG_PM for pm callbacksAlain Volmat1-8/+4
Avoid CONFIG_PM preprocessor check for pm suspend/resume callbacks and identify the functions with __maybe_unused. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1615545329-5496-1-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-12spi: core: remove 'delay_usecs' field from spi_transferAlexandru Ardelean1-1/+0
The 'delay' field in the spi_transfer struct is meant to replace the 'delay_usecs' field. However some cleanup was required to remove the uses of 'delay_usecs'. Now that it's been cleaned up, we can remove it from the kernel tree. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210308145502.1075689-10-aardelean@deviqon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-12spi: fsl-espi: remove usage of 'delay_usecs' fieldAlexandru Ardelean1-12/+5
The 'delay_usecs' field is being removed from the spi_transfer struct. This change removes it from the SPI FSL ESPI driver. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210308145502.1075689-9-aardelean@deviqon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-12spi: spi-falcon: remove check for 'delay_usecs'Alexandru Ardelean1-1/+1
The 'delay_usecs' field is being removed from the spi_transfer struct. This change removes it from the SPI Falcon driver. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210308145502.1075689-8-aardelean@deviqon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-12spi: spi-tegra20-flash: don't check 'delay_usecs' field for spi transferAlexandru Ardelean1-2/+1
The 'delay_usecs' field was handled for backwards compatibility in case there were some users that still configured SPI delay transfers with this field. They should all be removed by now. So we can remove the 'delay_usecs' handling in this driver. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210308145502.1075689-6-aardelean@deviqon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-12spi: spi-sh: replace 'delay_usecs' with 'delay.value' in pr_debugAlexandru Ardelean1-2/+2
The 'delay_usecs' field is going away. The replacement for it is the 'delay' field. So, we should print the 'delay.value' value instead. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210308145502.1075689-5-aardelean@deviqon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-12spi: spi-bcm-qspi: replace 'delay_usecs' with 'delay.value' checkAlexandru Ardelean1-1/+1
The 'delay_usecs' field is going away. The replacement for it is the 'delay' field. So, we should check for 'delay.value' being non-zero. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210308145502.1075689-4-aardelean@deviqon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-12spi: bcm63xx-spi: don't check 'delay_usecs' fieldAlexandru Ardelean1-1/+1
The 'delay_usecs' field was handled for backwards compatibility in case there were some users that still configured SPI delay transfers with this field. They should all be removed by now. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210308145502.1075689-3-aardelean@deviqon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-12spi: spi-axi-spi-engine: remove usage of delay_usecsAlexandru Ardelean1-8/+4
The 'delay_usecs' field was handled for backwards compatibility in case there were some users that still configured SPI delay transfers with this field. They should all be removed by now. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210308145502.1075689-2-aardelean@deviqon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-12spi: stm32: drop devres version of spi_register_masterAntonio Borneo1-1/+2
A call to spi_unregister_master() triggers calling remove() for all the spi devices binded to the spi master. Some spi device driver requires to "talk" with the spi device during the remove(), e.g.: - a LCD panel like drivers/gpu/drm/panel/panel-lg-lg4573.c will turn off the backlighting sending a command over spi. This implies that the spi master must be fully functional when spi_unregister_master() is called, either if it is called explicitly in the master's remove() code or implicitly by the devres framework. Devres calls devres_release_all() to release all the resources "after" the remove() of the spi master driver (check code of __device_release_driver() in drivers/base/dd.c). If the spi master driver has an empty remove() then there would be no issue; the devres_release_all() will release everything in reverse order w.r.t. probe(). But if code in spi master driver remove() disables the spi or makes it not functional (like in this spi-stm32), then devres cannot be used safely for unregistering the spi master and the binded spi devices. Replace devm_spi_register_master() with spi_register_master() and add spi_unregister_master() as first action in remove(). Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller") Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1615545286-5395-1-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-11spi: cadence: set cqspi to the driver_data field of struct deviceMeng Li1-0/+1
When initialize cadence qspi controller, it is need to set cqspi to the driver_data field of struct device, because it will be used in function cqspi_remove/suspend/resume(). Otherwise, there will be a crash trace as below when invoking these finctions. Fixes: 31fb632b5d43 ("spi: Move cadence-quadspi driver to drivers/spi/") Cc: stable@vger.kernel.org Signed-off-by: Meng Li <Meng.Li@windriver.com> Link: https://lore.kernel.org/r/20210311091220.3615-1-Meng.Li@windriver.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10spi: cadence-quadspi: Silence shiftTooManyBitsSigned warningJay Fang1-1/+1
drivers/spi/spi-cadence-quadspi.c:267:18: warning: Shifting signed 32-bit value by 31 bits is undefined behaviour [shiftTooManyBitsSigned] return reg & (1 << CQSPI_REG_CONFIG_IDLE_LSB); ^ Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1614854872-8694-1-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10Merge series "parport: Introduce module_parport_driver() and use it" from ↵Mark Brown2-24/+2
Andy Shevchenko <andriy.shevchenko@linux.intel.com>: Introduce module_parport_driver() and use it. Greg or Mark, since we have this series tagged, can somebody of you pick it up? Changelog v3: - added tag on patch 1 (Sudip) - Cc'ed to Greg Andy Shevchenko (3): parport: Introduce module_parport_driver() helper macro spi: butterfly: Switch to use module_parport_driver() spi: lm70llp: Switch to use module_parport_driver() drivers/spi/spi-butterfly.c | 13 +------------ drivers/spi/spi-lm70llp.c | 13 +------------ include/linux/parport.h | 12 +++++++++++- 3 files changed, 13 insertions(+), 25 deletions(-) base-commit: fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8 -- 2.30.1
2021-03-10spi: spi-nxp-fspi: Implement errata workaround for LS1028AKuldeep Singh1-6/+73
Errata ERR050568 description says that "Flash access by FlexSPI AHB command may not work with platform frequency equal to 300 MHz" on LS1028A. By default, smaller length reads(equal to RX FIFO size) are done by IP bus and larger length reads using AHB bus. For adding errata workaround, use IP bus to read entire flash contents and disable AHB path when platform frequency is 300Mhz. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Link: https://lore.kernel.org/r/20210302124936.1972546-5-kuldeep.singh@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10spi: spi-nxp-fspi: Add imx8dxl driver supportHan Xu1-0/+9
Add driver support for imx8dxl which support read through IP bus only and disable AHB bus due to an IC errata. Use the pre-defined quirk FSPI_QUIRK_USE_IP_ONLY directly in device-type data to disable AHB read. Signed-off-by: Han Xu <han.xu@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Link: https://lore.kernel.org/r/20210302124936.1972546-4-kuldeep.singh@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-24 23:48:59 +0300