summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)AuthorFilesLines
2021-09-12spi: cadence-quadspi: Allow compilation on RISC-VEmil Renner Berthing1-1/+1
This IP is also used on the StarFive JH7100 riscv64 SoC and presumably also the upcoming JH7110 SoC. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
2021-08-26spi: cadence-quadspi: Fix check condition for DTR opsApurva Nandan1-3/+18
[ Upstream commit 0395be967b067d99494113d78470574e86a02ed4 ] buswidth and dtr fields in spi_mem_op are only valid when the corresponding spi_mem_op phase has a non-zero length. For example, SPI NAND core doesn't set buswidth when using SPI_MEM_OP_NO_ADDR phase. Fix the dtr checks in set_protocol() and suppports_mem_op() to ignore empty spi_mem_op phases, as checking for dtr field in empty phase will result in false negatives. Signed-off-by: Apurva Nandan <a-nandan@ti.com> Link: https://lore.kernel.org/r/20210716232504.182-3-a-nandan@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26spi: spi-mux: Add module info needed for autoloadingUwe Kleine-König1-0/+8
[ Upstream commit 1d5ccab95f06675a269f4cb223a1e3f6d1ebef42 ] With the spi device table udev can autoload the spi-mux module in the presence of an spi-mux device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210721095321.2165453-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12spi: meson-spicc: fix memory leak in meson_spicc_removeDongliang Mu1-0/+2
commit 8311ee2164c5cd1b63a601ea366f540eae89f10e upstream. In meson_spicc_probe, the error handling code needs to clean up master by calling spi_master_put, but the remove function does not have this function call. This will lead to memory leak of spicc->master. Reported-by: Dongliang Mu <mudongliangabcd@gmail.com> Fixes: 454fa271bc4e("spi: Add Meson SPICC driver") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20210720100116.1438974-1-mudongliangabcd@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12spi: imx: mx51-ecspi: Fix low-speed CONFIGREG delay calculationMarek Vasut1-1/+15
[ Upstream commit 53ca18acbe645656132fb5a329833db711067e54 ] The spi_imx->spi_bus_clk may be uninitialized and thus also zero in mx51_ecspi_prepare_message(), which would lead to division by zero in kernel. Since bitbang .setup_transfer callback which initializes the spi_imx->spi_bus_clk is called after bitbang prepare_message callback, iterate over all the transfers in spi_message, find the one with lowest bus frequency, and use that bus frequency for the delay calculation. Note that it is not possible to move this CONFIGREG delay back into the .setup_transfer callback, because that is invoked too late, after the GPIO chipselects were already configured. Fixes: 135cbd378eab ("spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210726100102.5188-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delayMarek Vasut1-19/+19
[ Upstream commit 135cbd378eab336da15de9c84bbb22bf743b38a5 ] Since 00b80ac935539 ("spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook."), the MX51_ECSPI_CONFIG write no longer happens in prepare_transfer hook, but rather in prepare_message hook, however the MX51_ECSPI_CONFIG delay is still left in prepare_transfer hook and thus has no effect. This leads to low bus frequency operation problems described in 6fd8b8503a0dc ("spi: spi-imx: Fix out-of-order CS/SCLK operation at low speeds") again. Move the MX51_ECSPI_CONFIG write delay into the prepare_message hook as well, thus reinstating the low bus frequency fix. Fixes: 00b80ac935539 ("spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook.") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210703022300.296114-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08spi: mediatek: Fix fifo transferGuenter Roeck1-14/+5
commit 0d5c3954b35eddff0da0436c31e8d721eceb7dc2 upstream. Commit 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") claims that fifo RX mode was never handled, and adds the presumably missing code to the FIFO transfer function. However, the claim that receive data was not handled is incorrect. It was handled as part of interrupt handling after the transfer was complete. The code added with the above mentioned commit reads data from the receive FIFO before the transfer is started, which is wrong. This results in an actual transfer error on a Hayato Chromebook. Remove the code trying to handle receive data before the transfer is started to fix the problem. Fixes: 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") Cc: Peter Hess <peter.hess@ph-home.de> Cc: Frank Wunderlich <frank-w@public-files.de> Cc: Tzung-Bi Shih <tzungbi@google.com> Cc: Hsin-Yi Wang <hsinyi@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Hsin-Yi Wang <hsinyi@google.com> Tested-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210802030023.1748777-1-linux@roeck-us.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-08spi: stm32h7: fix full duplex irq handler handlingAlain Volmat1-6/+9
[ Upstream commit e4a5c19888a5f8a9390860ca493e643be58c8791 ] In case of Full-Duplex mode, DXP flag is set when RXP and TXP flags are set. But to avoid 2 different handlings, just add TXP and RXP flag in the mask instead of DXP, and then keep the initial handling of TXP and RXP events. Also rephrase comment about EOTIE which is one of the interrupt enable bits. It is not triggered by any event. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/1625042723-661-3-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28spi: spi-cadence-quadspi: Fix division by zero warning - try2Yoshitaka Ikeda1-0/+3
commit 0e85ee897858b1c7a5de53f496d016899d9639c5 upstream. Fix below division by zero warning: - The reason for dividing by zero is because the dummy bus width is zero, but if the dummy n bytes is zero, it indicates that there is no data transfer, so we can just return zero without doing any calculations. [ 0.795337] Division by zero in kernel. : [ 0.834051] [<807fd40c>] (__div0) from [<804e1acc>] (Ldiv0+0x8/0x10) [ 0.839097] [<805f0710>] (cqspi_exec_mem_op) from [<805edb4c>] (spi_mem_exec_op+0x3b0/0x3f8) Fixes: 7512eaf54190 ("spi: cadence-quadspi: Fix dummy cycle calculation when buswidth > 1") Signed-off-by: Yoshitaka Ikeda <ikeda@nskint.co.jp> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/92eea403-9b21-2488-9cc1-664bee760c5e@nskint.co.jp Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28spi: spi-cadence-quadspi: Revert "Fix division by zero warning"Yoshitaka Ikeda1-6/+4
commit 0ccfd1ba84a4503b509250941af149e9ebd605ca upstream. Revert to change to a better code. This reverts commit 55cef88bbf12f3bfbe5c2379a8868a034707e755. Signed-off-by: Yoshitaka Ikeda <ikeda@nskint.co.jp> Link: https://lore.kernel.org/r/bd30bdb4-07c4-f713-5648-01c898d51f1b@nskint.co.jp Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28spi: spi-bcm2835: Fix deadlockAlexandru Tachici1-5/+7
[ Upstream commit c45c1e82bba130db4f19d9dbc1deefcf4ea994ed ] The bcm2835_spi_transfer_one function can create a deadlock if it is called while another thread already has the CCF lock. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Fixes: f8043872e796 ("spi: add driver for BCM2835") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210716210245.13240-2-alexandru.tachici@analog.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28spi: cadence: Correct initialisation of runtime PM againMarek Vasut1-5/+9
[ Upstream commit 56912da7a68c8356df6a6740476237441b0b792a ] The original implementation of RPM handling in probe() was mostly correct, except it failed to call pm_runtime_get_*() to activate the hardware. The subsequent fix, 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM"), breaks the implementation further, to the point where the system using this hard IP on ZynqMP hangs on boot, because it accesses hardware which is gated off. Undo 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM") and instead add missing pm_runtime_get_noresume() and move the RPM disabling all the way to the end of probe(). That makes ZynqMP not hang on boot yet again. Fixes: 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210716182133.218640-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28spi: spi-cadence-quadspi: Fix division by zero warningYoshitaka Ikeda1-4/+6
[ Upstream commit 55cef88bbf12f3bfbe5c2379a8868a034707e755 ] Fix below division by zero warning: - Added an if statement because buswidth can be zero, resulting in division by zero. - The modified code was based on another driver (atmel-quadspi). [ 0.795337] Division by zero in kernel. : [ 0.834051] [<807fd40c>] (__div0) from [<804e1acc>] (Ldiv0+0x8/0x10) [ 0.839097] [<805f0710>] (cqspi_exec_mem_op) from [<805edb4c>] (spi_mem_exec_op+0x3b0/0x3f8) Fixes: 7512eaf54190 ("spi: cadence-quadspi: Fix dummy cycle calculation when buswidth > 1") Signed-off-by: Yoshitaka Ikeda <ikeda@nskint.co.jp> Link: https://lore.kernel.org/r/ed989af6-da88-4e0b-9ed8-126db6cad2e4@nskint.co.jp Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28spi: mediatek: fix fifo rx modePeter Hess1-3/+13
[ Upstream commit 3a70dd2d050331ee4cf5ad9d5c0a32d83ead9a43 ] In FIFO mode were two problems: - RX mode was never handled and - in this case the tx_buf pointer was NULL and caused an exception fix this by handling RX mode in mtk_spi_fifo_transfer Fixes: a568231f4632 ("spi: mediatek: Add spi bus for Mediatek MT8173") Signed-off-by: Peter Hess <peter.hess@ph-home.de> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20210706121609.680534-1-linux@fw-web.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28spi: stm32: fixes pm_runtime calls in probe/removeAlain Volmat1-1/+8
[ Upstream commit 7999d2555c9f879d006ea8469d74db9cdb038af0 ] Add pm_runtime calls in probe/probe error path and remove in order to be consistent in all places in ordering and ensure that pm_runtime is disabled prior to resources used by the SPI controller. This patch also fixes the 2 following warnings on driver remove: WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:594 clk_core_disable_lock+0x18/0x24 WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:476 clk_unprepare+0x24/0x2c Fixes: 038ac869c9d2 ("spi: stm32: add runtime PM support") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1625646426-5826-2-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14spi: spi-sun6i: Fix chipselect/clock bugMirko Vogt1-1/+5
[ Upstream commit 0d7993b234c9fad8cb6bec6adfaa74694ba85ecb ] The current sun6i SPI implementation initializes the transfer too early, resulting in SCK going high before the transfer. When using an additional (gpio) chipselect with sun6i, the chipselect is asserted at a time when clock is high, making the SPI transfer fail. This is due to SUN6I_GBL_CTL_BUS_ENABLE being written into SUN6I_GBL_CTL_REG at an early stage. Moving that to the transfer function, hence, right before the transfer starts, mitigates that problem. Fixes: 3558fe900e8af (spi: sunxi: Add Allwinner A31 SPI controller driver) Signed-off-by: Mirko Vogt <mirko-dev|linux@nanl.de> Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com> Link: https://lore.kernel.org/r/20210614144507.y3udezjfbko7eavv@runtux.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14spi: Avoid undefined behaviour when counting unused native CSsAndy Shevchenko1-1/+1
[ Upstream commit f60d7270c8a3d2beb1c23ae0da42497afa3584c2 ] ffz(), that has been used to count unused native CSs, might cause undefined behaviour when called against ~0U. To fix that, open code it with ffs(~value) - 1. Fixes: 7d93aecdb58d ("spi: Add generic support for unused native cs with cs-gpios") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210420164425.40287-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14spi: Allow to have all native CSs in use along with GPIOsAndy Shevchenko1-2/+3
[ Upstream commit dbaca8e56ea3f23fa215f48c2d46dd03ede06e02 ] The commit 7d93aecdb58d ("spi: Add generic support for unused native cs with cs-gpios") excludes the valid case for the controllers that doesn't need to switch native CS in order to perform the transfer, i.e. when 0 native ... ... <n> - 1 native <n> GPIO <n> + 1 GPIO ... ... where <n> defines maximum of native CSs supported by the controller. To allow this, bail out from spi_get_gpio_descs() conditionally for the controllers which explicitly marked with SPI_MASTER_GPIO_SS. Fixes: 7d93aecdb58d ("spi: Add generic support for unused native cs with cs-gpios") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210420164425.40287-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14spi: meson-spicc: fix memory leak in meson_spicc_probezpershuai1-1/+1
[ Upstream commit b2d501c13470409ee7613855b17e5e5ec4111e1c ] when meson_spicc_clk_init returns failed, it should goto the out_clk label. Signed-off-by: zpershuai <zpershuai@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/1623562156-21995-1-git-send-email-zpershuai@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14spi: meson-spicc: fix a wrong goto jump for avoiding memory leak.zpershuai1-2/+4
[ Upstream commit 95730d5eb73170a6d225a9998c478be273598634 ] In meson_spifc_probe function, when enable the device pclk clock is error, it should use clk_disable_unprepare to release the core clock. Signed-off-by: zpershuai <zpershuai@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/1623562172-22056-1-git-send-email-zpershuai@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14spi: omap-100k: Fix the length judgment problemTian Tao1-1/+1
[ Upstream commit e7a1a3abea373e41ba7dfe0fbc93cb79b6a3a529 ] word_len should be checked in the omap1_spi100k_setup_transfer function to see if it exceeds 32. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1619695248-39045-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14spi: spi-topcliff-pch: Fix potential double free in pch_spi_process_messages()Jay Fang1-1/+3
[ Upstream commit 026a1dc1af52742c5897e64a3431445371a71871 ] pch_spi_set_tx() frees data->pkt_tx_buff on failure of kzalloc() for data->pkt_rx_buff, but its caller, pch_spi_process_messages(), will free data->pkt_tx_buff again. Set data->pkt_tx_buff to NULL after kfree() to avoid double free. Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1620284888-65215-1-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14spi: spi-loopback-test: Fix 'tx_buf' might be 'rx_buf'Jay Fang1-1/+1
[ Upstream commit 9e37a3ab0627011fb63875e9a93094b6fc8ddf48 ] In function 'spi_test_run_iter': Value 'tx_buf' might be 'rx_buf'. Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1620629903-15493-5-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14spi: Make of_register_spi_device also set the fwnodeCharles Keepax1-0/+1
[ Upstream commit 0e793ba77c18382f08e440260fe72bc6fce2a3cb ] Currently, the SPI core doesn't set the struct device fwnode pointer when it creates a new SPI device. This means when the device is registered the fwnode is NULL and the check in device_add which sets the fwnode->dev pointer is skipped. This wasn't previously an issue, however these two patches: commit 4731210c09f5 ("gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default") commit ced2af419528 ("gpiolib: Don't probe gpio_device if it's not the primary device") Added some code to the GPIO core which relies on using that fwnode->dev pointer to determine if a driver is bound to the fwnode and if not bind a stub GPIO driver. This means the GPIO providers behind SPI will get both the expected driver and this stub driver causing the stub driver to fail if it attempts to request any pin configuration. For example on my system: madera-pinctrl madera-pinctrl: pin gpio5 already requested by madera-pinctrl; cannot claim for gpiochip3 madera-pinctrl madera-pinctrl: pin-4 (gpiochip3) status -22 madera-pinctrl madera-pinctrl: could not request pin 4 (gpio5) from group aif1 on device madera-pinctrl gpio_stub_drv gpiochip3: Error applying setting, reverse things back gpio_stub_drv: probe of gpiochip3 failed with error -22 The firmware node on the device created by the GPIO framework is set through the of_node pointer hence things generally actually work, however that fwnode->dev is never set, as the check was skipped at device_add time. This fix appears to match how the I2C subsystem handles the same situation. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210421101402.8468-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-14spi: spi-nxp-fspi: move the register operation after the clock enableHaibo Chen1-6/+5
Move the register operation after the clock enable, otherwise system will stuck when this driver probe. Fixes: 71d80563b076 ("spi: spi-nxp-fspi: fix fspi panic by unexpected interrupts") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1623317073-25158-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-08spi: tegra20-slink: Ensure SPI controller reset is deassertedJon Hunter1-0/+5
Commit 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling clocks") removed some legacy code for handling resets on Tegra from within the Tegra clock code. This exposed an issue in the Tegra20 slink driver where the SPI controller reset was not being deasserted as needed during probe. This is causing the Tegra30 Cardhu platform to hang on boot. Fix this by ensuring the SPI controller reset is deasserted during probe. Fixes: 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling clocks") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20210608071518.93037-1-jonathanh@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-03spi: stm32-qspi: Always wait BUSY bit to be cleared in stm32_qspi_wait_cmd()Patrice Chotard1-1/+4
In U-boot side, an issue has been encountered when QSPI source clock is running at low frequency (24 MHz for example), waiting for TCF bit to be set didn't ensure that all data has been send out the FIFO, we should also wait that BUSY bit is cleared. To prevent similar issue in kernel driver, we implement similar behavior by always waiting BUSY bit to be cleared. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210603073421.8441-1-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-02spi: spi-zynq-qspi: Fix some wrong goto jumps & missing error codezpershuai1-3/+4
In zynq_qspi_probe function, when enable the device clock is done, the return of all the functions should goto the clk_dis_all label. If num_cs is not right then this should return a negative error code but currently it returns success. Signed-off-by: zpershuai <zpershuai@gmail.com> Link: https://lore.kernel.org/r/1622110857-21812-1-git-send-email-zpershuai@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-01spi: Cleanup on failure of initial setupLukas Wunner5-19/+54
Commit c7299fea6769 ("spi: Fix spi device unregister flow") changed the SPI core's behavior if the ->setup() hook returns an error upon adding an spi_device: Before, the ->cleanup() hook was invoked to free any allocations that were made by ->setup(). With the commit, that's no longer the case, so the ->setup() hook is expected to free the allocations itself. I've identified 5 drivers which depend on the old behavior and am fixing them up hereinafter: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c spi-omap2-mcspi.c spi-pxa2xx.c Importantly, ->setup() is not only invoked on spi_device *addition*: It may subsequently be called to *change* SPI parameters. If changing these SPI parameters fails, freeing memory allocations would be wrong. That should only be done if the spi_device is finally destroyed. I am therefore using a bool "initial_setup" in 4 of the affected drivers to differentiate between the invocation on *adding* the spi_device and any subsequent invocations: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c spi-omap2-mcspi.c In spi-pxa2xx.c, it seems the ->setup() hook can only fail on spi_device addition, not any subsequent calls. It therefore doesn't need the bool. It's worth noting that 5 other drivers already perform a cleanup if the ->setup() hook fails. Before c7299fea6769, they caused a double-free if ->setup() failed on spi_device addition. Since the commit, they're fine. These drivers are: spi-mpc512x-psc.c spi-pl022.c spi-s3c64xx.c spi-st-ssc4.c spi-tegra114.c (spi-pxa2xx.c also already performs a cleanup, but only in one of several error paths.) Fixes: c7299fea6769 ("spi: Fix spi device unregister flow") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Saravana Kannan <saravanak@google.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # pxa2xx Link: https://lore.kernel.org/r/f76a0599469f265b69c371538794101fa37b5536.1622149321.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-24spi: bcm2835: Fix out-of-bounds access with more than 4 slavesLukas Wunner1-2/+8
Commit 571e31fa60b3 ("spi: bcm2835: Cache CS register value for ->prepare_message()") limited the number of slaves to 3 at compile-time. The limitation was necessitated by a statically-sized array prepare_cs[] in the driver private data which contains a per-slave register value. The commit sought to enforce the limitation at run-time by setting the controller's num_chipselect to 3: Slaves with a higher chipselect are rejected by spi_add_device(). However the commit neglected that num_chipselect only limits the number of *native* chipselects. If GPIO chipselects are specified in the device tree for more than 3 slaves, num_chipselect is silently raised by of_spi_get_gpio_numbers() and the result are out-of-bounds accesses to the statically-sized array prepare_cs[]. As a bandaid fix which is backportable to stable, raise the number of allowed slaves to 24 (which "ought to be enough for anybody"), enforce the limitation on slave ->setup and revert num_chipselect to 3 (which is the number of native chipselects supported by the controller). An upcoming for-next commit will allow an arbitrary number of slaves. Fixes: 571e31fa60b3 ("spi: bcm2835: Cache CS register value for ->prepare_message()") Reported-by: Joe Burmeister <joe.burmeister@devtank.co.uk> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v5.4+ Cc: Phil Elwell <phil@raspberrypi.com> Link: https://lore.kernel.org/r/75854affc1923309fde05e47494263bde73e5592.1621703210.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-21spi: sc18is602: implement .max_{transfer,message}_size() for the controllerVladimir Oltean1-0/+7
Allow SPI peripherals attached to this controller to know what is the maximum transfer size and message size, so they can limit their transfer lengths properly in case they are otherwise capable of larger transfer sizes. For the sc18is602, this is 200 bytes in both cases, since as far as I understand, it isn't possible to tell the controller to keep the chip select asserted after the STOP command is sent. The controller can support SPI messages larger than 200 bytes if cs_change is set for individual transfers such that the portions with chip select asserted are never longer than 200 bytes. What is not supported is just SPI messages with a continuous chip select larger than 200. I don't think it is possible to express this using the current API, so drivers which do send SPI messages with cs_change can safely just look at the max_transfer_size limit. An example of user for this is sja1105_xfer() in drivers/net/dsa/sja1105/sja1105_spi.c which sends by default 64 * 4 = 256 byte transfers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210520131238.2903024-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-21spi: sc18is602: don't consider the chip select byte in sc18is602_check_transferVladimir Oltean1-1/+1
For each spi_message, the sc18is602 I2C-to-SPI bridge driver checks the length of each spi_transfer against 200 (the size of the chip's internal buffer) minus hw->tlen (the number of bytes transferred so far). The first byte of the transferred data is the Function ID (the SPI slave's chip select) and as per the documentation of the chip: https://www.nxp.com/docs/en/data-sheet/SC18IS602B.pdf the data buffer is up to 200 bytes deep _without_ accounting for the Function ID byte. However, in sc18is602_txrx(), the driver keeps the Function ID as part of the buffer, and increments hw->tlen from 0 to 1. Combined with the check in sc18is602_check_transfer, this prevents us from issuing a transfer that has exactly 200 bytes in size, but only 199. Adjust the check function to reflect that the Function ID is not part of the 200 byte deep data buffer. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210520131238.2903024-2-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-18Merge tag 'v5.13-rc2' into spi-5.13Mark Brown5-27/+16
Linux 5.13-rc2
2021-05-14spi: Don't have controller clean up spi device before driver unbindSaravana Kannan1-3/+3
When a spi device is unregistered and triggers a driver unbind, the driver might need to access the spi device. So, don't have the controller clean up the spi device before the driver is unbound. Clean up the spi device after the driver is unbound. Fixes: c7299fea6769 ("spi: Fix spi device unregister flow") Reported-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Saravana Kannan <saravanak@google.com> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210505164734.175546-1-saravanak@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-12spi: Assume GPIO CS active high in ACPI caseAndy Shevchenko1-4/+18
Currently GPIO CS handling, when descriptors are in use, doesn't take into consideration that in ACPI case the default polarity is Active High and can't be altered. Instead we have to use the per-chip definition provided by SPISerialBus() resource. Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors") Cc: Liguang Zhang <zhangliguang@linux.alibaba.com> Cc: Jay Fang <f.fangjian@huawei.com> Cc: Sven Van Asbroeck <thesven73@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Xin Hao <xhao@linux.alibaba.com> Link: https://lore.kernel.org/r/20210511140912.30757-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-12spi: sprd: Add missing MODULE_DEVICE_TABLEChunyan Zhang1-0/+1
MODULE_DEVICE_TABLE is used to extract the device information out of the driver and builds a table when being compiled. If using this macro, kernel can find the driver if available when the device is plugged in, and then loads that driver and initializes the device. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20210512093534.243040-1-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-10spi: take the SPI IO-mutex in the spi_set_cs_timing methodLeilk Liu1-2/+7
this patch takes the io_mutex to prevent an unprotected HW register modification in the set_cs_timing callback. Fixes: 4cea6b8cc34e ("spi: add power control when set_cs_timing") Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Link: https://lore.kernel.org/r/20210508060214.1485-1-leilk.liu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-10spi: spi-fsl-dspi: Fix a resource leak in an error handling pathChristophe JAILLET1-1/+3
'dspi_request_dma()' should be undone by a 'dspi_release_dma()' call in the error handling path of the probe function, as already done in the remove function Fixes: 90ba37033cb9 ("spi: spi-fsl-dspi: Add DMA support for Vybrid") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/d51caaac747277a1099ba8dea07acd85435b857e.1620587472.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-30Merge tag 'sound-5.13-rc1' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "No surprises in this development cycle, and most of work is about the fixes and the improvements of the existing code, while a new LED control layer and a few new drivers have been introduced. Here are some highlights: Core: - A common mute-LED framework was introduced. It is used by HD-audio for now, more adaption will follow later. The former "Mic Mute-LED Mode" mixer control has been replaced with the corresponding sysfs now. - User-control management was changed to count consumed bytes instead of capping by number of elements; this will allow more controls in the normal usage pattern while avoiding the possible memory exhaustion DoS ASoC: - Continued refactoring and cleanups in ASoC core and generic card drivers - Wide range of small cppcheck and warning fixes - New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358 accessory detection, and Realtek RT1019, RT1316, RT711 and RT715 USB-audio: - Continued improvements and fixes of the implicit feedback mode, including better support for Pioneer and Roland/BOSS devices HD-audio: - Default back to non-buffer preallocation on x86 - Cirrus codec improvements, more quirks for Realtek codecs Others: - New virtio sound driver - FireWire Bebob updates" * tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits) ALSA: hda/conexant: Re-order CX5066 quirk table entries ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices ALSA: hda/realtek: Re-order ALC662 quirk table entries ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries ALSA: hda/realtek: Re-order ALC269 HP quirk table entries ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries ALSA: usb-audio: Remove redundant assignment to len ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx ALSA: virtio: fix kernel-doc ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB ALSA: sb: Fix two use after free in snd_sb_qsound_build ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer ...
2021-04-29spi: spi-zynq-qspi: Fix stack violation bugKaren Dombroski1-4/+3
When the number of bytes for the op is greater than one, the read could run off the end of the function stack and cause a crash. This patch restores the behaviour of safely reading out of the original opcode location. Signed-off-by: Karen Dombroski <karen.dombroski@marsbioimaging.com> Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Link: https://lore.kernel.org/r/20210429053802.17650-3-amit.kumar-mahapatra@xilinx.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-29spi: spi-zynq-qspi: Fix kernel-doc warningAmit Kumar Mahapatra1-1/+1
Fix kernel-doc warning. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Link: https://lore.kernel.org/r/20210429053802.17650-2-amit.kumar-mahapatra@xilinx.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-28spi: altera: Make SPI_ALTERA_CORE invisibleGeert Uytterhoeven1-1/+1
The SPI_ALTERA_CORE config symbol controls compilation of the Altera SPI Controller core code. It is already selected by all of its users, so there is no reason to make it visible, unless compile-testing. Fixes: b0c3d9354de1f87e ("spi: altera: separate core code from platform code") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/f0cb8e66baba4506db6f42fca74dc51b76883507.1619534253.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-28spi: Fix spi device unregister flowSaravana Kannan1-6/+12
When an SPI device is unregistered, the spi->controller->cleanup() is called in the device's release callback. That's wrong for a couple of reasons: 1. spi_dev_put() can be called before spi_add_device() is called. And it's spi_add_device() that calls spi_setup(). This will cause clean() to get called without the spi device ever being setup. 2. There's no guarantee that the controller's driver would be present by the time the spi device's release function gets called. 3. It also causes "sleeping in atomic context" stack dump[1] when device link deletion code does a put_device() on the spi device. Fix these issues by simply moving the cleanup from the device release callback to the actual spi_unregister_device() function. [1] - https://lore.kernel.org/lkml/CAHp75Vc=FCGcUyS0v6fnxme2YJ+qD+Y-hQDQLa2JhWNON9VmsQ@mail.gmail.com/ Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210426235638.1285530-1-saravanak@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-27Merge tag 'cfi-v5.13-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull CFI on arm64 support from Kees Cook: "This builds on last cycle's LTO work, and allows the arm64 kernels to be built with Clang's Control Flow Integrity feature. This feature has happily lived in Android kernels for almost 3 years[1], so I'm excited to have it ready for upstream. The wide diffstat is mainly due to the treewide fixing of mismatched list_sort prototypes. Other things in core kernel are to address various CFI corner cases. The largest code portion is the CFI runtime implementation itself (which will be shared by all architectures implementing support for CFI). The arm64 pieces are Acked by arm64 maintainers rather than coming through the arm64 tree since carrying this tree over there was going to be awkward. CFI support for x86 is still under development, but is pretty close. There are a handful of corner cases on x86 that need some improvements to Clang and objtool, but otherwise works well. Summary: - Clean up list_sort prototypes (Sami Tolvanen) - Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)" * tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arm64: allow CONFIG_CFI_CLANG to be selected KVM: arm64: Disable CFI for nVHE arm64: ftrace: use function_nocfi for ftrace_call arm64: add __nocfi to __apply_alternatives arm64: add __nocfi to functions that jump to a physical address arm64: use function_nocfi with __pa_symbol arm64: implement function_nocfi psci: use function_nocfi for cpu_resume lkdtm: use function_nocfi treewide: Change list_sort to use const pointers bpf: disable CFI in dispatcher functions kallsyms: strip ThinLTO hashes from static functions kthread: use WARN_ON_FUNCTION_MISMATCH workqueue: use WARN_ON_FUNCTION_MISMATCH module: ensure __cfi_check alignment mm: add generic function_nocfi macro cfi: add __cficanonical add support for Clang CFI
2021-04-27Merge tag 'spi-v5.13' of ↵Linus Torvalds49-632/+1488
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The only core work for SPI this time around is the completion of the conversion to the new style method for specifying transfer delays, meaning we can cope with what most controllers support more directly using conversions in the core rather than open coding in drivers. Otherwise it's a good stack of cleanups and fixes plus a few new drivers. Summary: - Completion of the conversion to new style transfer delay configuration - Introduction and use of module_parport_driver() helper, merged here as there's no parport tree - Support for Altera SoCs on DFL buses, NXP i.MX8DL, HiSilicon Kunpeng, MediaTek MT8195" * tag 'spi-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (113 commits) spi: Rename enable1 to activate in spi_set_cs() spi: Convert Freescale QSPI binding to json schema spi: stm32-qspi: fix debug format string spi: tools: make a symbolic link to the header file spi.h spi: fsi: add a missing of_node_put spi: Make error handling of gpiod_count() call cleaner spidev: Add Micron SPI NOR Authenta device compatible spi: brcm,spi-bcm-qspi: convert to the json-schema spi: altera: Add DFL bus driver for Altera API Controller spi: altera: separate core code from platform code spi: stm32-qspi: Fix compilation warning in ARM64 spi: Handle SPI device setup callback failure. spi: sync up initial chipselect state spi: stm32-qspi: Add dirmap support spi: stm32-qspi: Trigger DMA only if more than 4 bytes to transfer spi: stm32-qspi: fix pm_runtime usage_count counter spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op spi: spi-zynqmp-gqspi: Resolved slab-out-of-bounds bug spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume ...
2021-04-23spi: Rename enable1 to activate in spi_set_cs()Andy Shevchenko1-5/+4
The enable1 is confusing name. Change it to clearly show what is the intention behind it. No functional changes. Fixes: 25093bdeb6bc ("spi: implement SW control for CS times") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210420131846.75983-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-22spi: stm32-qspi: fix debug format stringArnd Bergmann1-1/+1
Printing size_t needs a special %zx format modifier to avoid a warning like: drivers/spi/spi-stm32-qspi.c:481:41: note: format string is defined here 481 | dev_dbg(qspi->dev, "%s len = 0x%x offs = 0x%llx buf = 0x%p\n", __func__, len, offs, buf); Patrice already tried to fix this, but picked %lx instead of %zx, which fixed some architectures but broke others in the same way. Using %zx works everywhere. Fixes: 18674dee3cd6 ("spi: stm32-qspi: Add dirmap support") Fixes: 1b8a7d4282c0 ("spi: stm32-qspi: Fix compilation warning in ARM64") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210422134955.1988316-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21spi: fsi: add a missing of_node_putChristophe JAILLET1-1/+3
'for_each_available_child_of_node' performs an of_node_get on each iteration, so a return from the middle of the loop requires an of_node_put. Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/504e431b900341249d331b868d90312cf41f415a.1618947919.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21spi: Make error handling of gpiod_count() call cleanerAndy Shevchenko1-6/+7
Each time we call spi_get_gpio_descs() the num_chipselect is overwritten either by new value or by the old one. This is an extra operation in case gpiod_count() returns an error. Besides that it slashes the error handling of gpiod_count(). Refactor the code to make error handling of gpiod_count() call cleaner. Note, that gpiod_count() never returns 0, take this into account as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210420164040.40055-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20Merge series "spi: altera: Add DFL bus support for Altera SPI" from ↵Mark Brown5-163/+401
matthew.gerlach@linux.intel.com Matthew Gerlach <matthew.gerlach@linux.intel.com>: From: Matthew Gerlach <matthew.gerlach@linux.intel.com> This patch set adds Device Feature List (DFL) bus support for the Altera SPI Master controller. Patch 1 separates spi-altera.c into spi-altera-core.c and spi-altera-platform.c. Patch 2 adds spi-altera-dfl.c. Matthew Gerlach (2): spi: altera: separate core code from platform code spi: altera: Add DFL bus driver for Altera API Controller drivers/spi/Kconfig | 18 +- drivers/spi/Makefile | 4 +- drivers/spi/spi-altera-core.c | 222 ++++++++++++++++++++++ drivers/spi/spi-altera-dfl.c | 204 ++++++++++++++++++++ drivers/spi/spi-altera-platform.c | 172 +++++++++++++++++ drivers/spi/spi-altera.c | 378 -------------------------------------- include/linux/spi/altera.h | 21 +++ 7 files changed, 639 insertions(+), 380 deletions(-) create mode 100644 drivers/spi/spi-altera-core.c create mode 100644 drivers/spi/spi-altera-dfl.c create mode 100644 drivers/spi/spi-altera-platform.c delete mode 100644 drivers/spi/spi-altera.c -- 1.8.3.1
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-17 13:48:28 +0300