summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-nxp-fspi.c
AgeCommit message (Collapse)AuthorFilesLines
2021-10-02spi: spi-nxp-fspi: don't depend on a specific node name erratum workaroundMichael Walle1-19/+7
In commit 7e71b85473f8 ("arm64: dts: ls1028a: fix node name for the sysclk") the sysclk node name was renamed and broke the erratum workaround because it tries to fetch a device tree node by its name, which is very fragile in general. We don't even need the sysclk node because the only possible sysclk frequency input is 100MHz. In fact, the erratum says it applies if SYS_PLL_RAT is 3, not that the platform clock is 300 MHz. Make the workaround more reliable and just drop the unneeded sysclk lookup. For reference, the error during the bootup is the following: [ 4.898400] nxp-fspi 20c0000.spi: Errata cannot be executed. Read via IP bus may not work Fixes: 82ce7d0e74b6 ("spi: spi-nxp-fspi: Implement errata workaround for LS1028A") Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20211001212726.159437-1-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-14spi: spi-nxp-fspi: move the register operation after the clock enableHaibo Chen1-6/+5
Move the register operation after the clock enable, otherwise system will stuck when this driver probe. Fixes: 71d80563b076 ("spi: spi-nxp-fspi: fix fspi panic by unexpected interrupts") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1623317073-25158-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-25spi: fspi: enable fspi driver for on imx8mpHeiko Schocher1-0/+1
add compatible entry in nxp_fspi driver for imx8mp. Signed-off-by: Heiko Schocher <hs@denx.de> Link: https://lore.kernel.org/r/20210316075928.1763460-2-hs@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10spi: spi-nxp-fspi: Implement errata workaround for LS1028AKuldeep Singh1-6/+73
Errata ERR050568 description says that "Flash access by FlexSPI AHB command may not work with platform frequency equal to 300 MHz" on LS1028A. By default, smaller length reads(equal to RX FIFO size) are done by IP bus and larger length reads using AHB bus. For adding errata workaround, use IP bus to read entire flash contents and disable AHB path when platform frequency is 300Mhz. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Link: https://lore.kernel.org/r/20210302124936.1972546-5-kuldeep.singh@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10spi: spi-nxp-fspi: Add imx8dxl driver supportHan Xu1-0/+9
Add driver support for imx8dxl which support read through IP bus only and disable AHB bus due to an IC errata. Use the pre-defined quirk FSPI_QUIRK_USE_IP_ONLY directly in device-type data to disable AHB read. Signed-off-by: Han Xu <han.xu@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Link: https://lore.kernel.org/r/20210302124936.1972546-4-kuldeep.singh@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10spi: spi-nxp-fspi: Add support for IP read onlyKuldeep Singh1-6/+22
Add support for disabling AHB bus and read entire flash contents via IP bus only. Please note, this enables IP bus read using a quirk which can be enabled directly in device-type data or in existence of an errata where AHB bus may need to be disabled. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Link: https://lore.kernel.org/r/20210302124936.1972546-2-kuldeep.singh@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-23spi: spi-nxp-fspi: fix fspi panic by unexpected interruptsRan Wang1-0/+7
Given the case that bootloader(such as UEFI)'s FSPI driver might not handle all interrupts before loading kernel, those legacy interrupts would assert immidiately once kernel's FSPI driver enable them. Further, if it was FSPI_INTR_IPCMDDONE, the irq handler nxp_fspi_irq_handler() would call complete(&f->c) to notify others. However, f->c might not be initialized yet at that time, then cause kernel panic. Of cause, we should fix this issue within bootloader. But it would be better to have this pacth to make dirver more robust (by clearing all interrupt status bits before enabling interrupts). Suggested-by: Han Xu <han.xu@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Link: https://lore.kernel.org/r/20201123025715.14635-1-ran.wang_1@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17spi: spi-nxp-fspi: Add ACPI supportkuldip dwivedi1-19/+50
Currently NXP fspi driver has support of DT only. Adding ACPI support to the driver so that it can be used by UEFI firmware booting in ACPI mode. This driver will be probed if any firmware will expose HID "NXP0009" in DSDT table. Signed-off-by: kuldip dwivedi <kuldip.dwivedi@puresoftware.com> Reviewed-by: Ashish Kumar <Ashish.Kumar@nxp.com> Link: https://lore.kernel.org/r/20200911130331.6313-1-kuldip.dwivedi@puresoftware.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-12spi: spi-nxp-fspi: Fix a NULL vs IS_ERR() check in probeDan Carpenter1-2/+2
The platform_get_resource_byname() function returns NULL on error, it doesn't return error pointers. Fixes: d166a73503ef ("spi: fspi: dynamically alloc AHB memory") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200312113154.GC20562@mwanda Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-05spi: spi-nxp-fspi: Enable the Octal Mode in MCR0Han Xu1-2/+3
Apply patch from NXP upstream repo to Enable the octal combination mode in MCR0 Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Han Xu <han.xu@nxp.com> Link: https://lore.kernel.org/r/20200126140913.2139260-3-aford173@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-05spi: fspi: dynamically alloc AHB memoryHan Xu1-6/+34
Apply patch from NXP upstream repo to dynamically allocate AHB memory as needed. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Han Xu <han.xu@nxp.com> Link: https://lore.kernel.org/r/20200126140913.2139260-2-aford173@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-05spi: fspi: enable fspi on imx8qxp and imx8mmHan Xu1-0/+18
Pull in this patch from NXP's upstream repo to enable fspi on imx8qxp and imx8mm Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Han Xu <han.xu@nxp.com> Link: https://lore.kernel.org/r/20200126140913.2139260-1-aford173@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-16spi: nxp-fspi: Ensure width is respected in spi-mem operationsMichael Walle1-1/+1
Make use of a core helper to ensure the desired width is respected when calling spi-mem operators. Otherwise only the SPI controller will be matched with the flash chip, which might lead to wrong widths. Also consider the width specified by the user in the device tree. Fixes: a5356aef6a90 ("spi: spi-mem: Add driver for NXP FlexSPI controller") Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20191211195730.26794-1-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11spi: nxp-fspi: Use devm API to fix missed unregistration of controllerChuhong Yuan1-1/+1
This driver forgets to unregister controller when remove. Use devm API to unregister it automatically to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191109075517.29988-1-hslester96@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-02spi: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-3/+1
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Mark Brown <broonie@kernel.org> Cc: linux-spi@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-42-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-29spi: spi-mem: spi-nxp-fspi: add module license infoYogesh Narayan Gaur1-2/+3
Add MODULE_LICENSE info to fix below warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/spi/spi-nxp-fspi.o Typo fix in Boris Brezillon last name. Fixes: a5356aef6a90 ("spi: spi-mem: Add driver for NXP FlexSPI controller") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-28spi: nxp-fspi: add octal mode flag bit for octal supportYogesh Narayan Gaur1-2/+2
Add octal mode flags for octal I/O data transfer support. NXP FlexSPI controller supports 8 lines Rx/Tx data transfer. Signed-off-by: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-28spi: spi-mem: Add driver for NXP FlexSPI controllerYogesh Narayan Gaur1-0/+1105
- Add driver for NXP FlexSPI host controller (0) What is the FlexSPI controller? FlexSPI is a flexsible SPI host controller which supports two SPI channels and up to 4 external devices. Each channel supports Single/Dual/Quad/Octal mode data transfer (1/2/4/8 bidirectional data lines) i.e. FlexSPI acts as an interface to external devices, maximum 4, each with up to 8 bidirectional data lines. It uses new SPI memory interface of the SPI framework to issue flash memory operations to up to four connected flash devices (2 buses with 2 CS each). (1) Tested this driver with the mtd_debug and JFFS2 filesystem utility on NXP LX2160ARDB and LX2160AQDS targets. LX2160ARDB is having two NOR slave device connected on single bus A i.e. A0 and A1 (CS0 and CS1). LX2160AQDS is having two NOR slave device connected on separate buses one flash on A0 and second on B1 i.e. (CS0 and CS3). Verified this driver on following SPI NOR flashes: Micron, mt35xu512ab, [Read - 1 bit mode] Cypress, s25fl512s, [Read - 1/2/4 bit mode] Signed-off-by: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Tested-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-15 08:41:05 +0300